| /* | |
| * TI/National Semiconductor LP3943 GPIO driver | |
| * | |
| * Copyright 2013 Texas Instruments | |
| * | |
| * Author: Milo Kim <milo.kim@ti.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; version 2. | |
| */ | |
| #include <linux/bitops.h> | |
| #include <linux/err.h> | |
| #include <linux/gpio.h> | |
| #include <linux/i2c.h> | |
| #include <linux/mfd/lp3943.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/slab.h> | |
| enum lp3943_gpios { | |
| LP3943_GPIO1, | |
| LP3943_GPIO2, | |
| LP3943_GPIO3, | |
| LP3943_GPIO4, | |
| LP3943_GPIO5, | |
| LP3943_GPIO6, | |
| LP3943_GPIO7, | |
| LP3943_GPIO8, | |
| LP3943_GPIO9, | |
| LP3943_GPIO10, | |
| LP3943_GPIO11, | |
| LP3943_GPIO12, | |
| LP3943_GPIO13, | |
| LP3943_GPIO14, | |
| LP3943_GPIO15, | |
| LP3943_GPIO16, | |
| LP3943_MAX_GPIO, | |
| }; | |
| struct lp3943_gpio { | |
| struct gpio_chip chip; | |
| struct lp3943 *lp3943; | |
| u16 input_mask; /* 1 = GPIO is input direction, 0 = output */ | |
| }; | |
| static int lp3943_gpio_request(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct lp3943_gpio *lp3943_gpio = gpiochip_get_data(chip); | |
| struct lp3943 *lp3943 = lp3943_gpio->lp3943; | |
| /* Return an error if the pin is already assigned */ | |
| if (test_and_set_bit(offset, &lp3943->pin_used)) | |
| return -EBUSY; | |
| return 0; | |
| } | |
| static void lp3943_gpio_free(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct lp3943_gpio *lp3943_gpio = gpiochip_get_data(chip); | |
| struct lp3943 *lp3943 = lp3943_gpio->lp3943; | |
| clear_bit(offset, &lp3943->pin_used); | |
| } | |
| static int lp3943_gpio_set_mode(struct lp3943_gpio *lp3943_gpio, u8 offset, | |
| u8 val) | |
| { | |
| struct lp3943 *lp3943 = lp3943_gpio->lp3943; | |
| const struct lp3943_reg_cfg *mux = lp3943->mux_cfg; | |
| return lp3943_update_bits(lp3943, mux[offset].reg, mux[offset].mask, | |
| val << mux[offset].shift); | |
| } | |
| static int lp3943_gpio_direction_input(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct lp3943_gpio *lp3943_gpio = gpiochip_get_data(chip); | |
| lp3943_gpio->input_mask |= BIT(offset); | |
| return lp3943_gpio_set_mode(lp3943_gpio, offset, LP3943_GPIO_IN); | |
| } | |
| static int lp3943_get_gpio_in_status(struct lp3943_gpio *lp3943_gpio, | |
| struct gpio_chip *chip, unsigned offset) | |
| { | |
| u8 addr, read; | |
| int err; | |
| switch (offset) { | |
| case LP3943_GPIO1 ... LP3943_GPIO8: | |
| addr = LP3943_REG_GPIO_A; | |
| break; | |
| case LP3943_GPIO9 ... LP3943_GPIO16: | |
| addr = LP3943_REG_GPIO_B; | |
| offset = offset - 8; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| err = lp3943_read_byte(lp3943_gpio->lp3943, addr, &read); | |
| if (err) | |
| return err; | |
| return !!(read & BIT(offset)); | |
| } | |
| static int lp3943_get_gpio_out_status(struct lp3943_gpio *lp3943_gpio, | |
| struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct lp3943 *lp3943 = lp3943_gpio->lp3943; | |
| const struct lp3943_reg_cfg *mux = lp3943->mux_cfg; | |
| u8 read; | |
| int err; | |
| err = lp3943_read_byte(lp3943, mux[offset].reg, &read); | |
| if (err) | |
| return err; | |
| read = (read & mux[offset].mask) >> mux[offset].shift; | |
| if (read == LP3943_GPIO_OUT_HIGH) | |
| return 1; | |
| else if (read == LP3943_GPIO_OUT_LOW) | |
| return 0; | |
| else | |
| return -EINVAL; | |
| } | |
| static int lp3943_gpio_get(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct lp3943_gpio *lp3943_gpio = gpiochip_get_data(chip); | |
| /* | |
| * Limitation: | |
| * LP3943 doesn't have the GPIO direction register. It provides | |
| * only input and output status registers. | |
| * So, direction info is required to handle the 'get' operation. | |
| * This variable is updated whenever the direction is changed and | |
| * it is used here. | |
| */ | |
| if (lp3943_gpio->input_mask & BIT(offset)) | |
| return lp3943_get_gpio_in_status(lp3943_gpio, chip, offset); | |
| else | |
| return lp3943_get_gpio_out_status(lp3943_gpio, chip, offset); | |
| } | |
| static void lp3943_gpio_set(struct gpio_chip *chip, unsigned offset, int value) | |
| { | |
| struct lp3943_gpio *lp3943_gpio = gpiochip_get_data(chip); | |
| u8 data; | |
| if (value) | |
| data = LP3943_GPIO_OUT_HIGH; | |
| else | |
| data = LP3943_GPIO_OUT_LOW; | |
| lp3943_gpio_set_mode(lp3943_gpio, offset, data); | |
| } | |
| static int lp3943_gpio_direction_output(struct gpio_chip *chip, unsigned offset, | |
| int value) | |
| { | |
| struct lp3943_gpio *lp3943_gpio = gpiochip_get_data(chip); | |
| lp3943_gpio_set(chip, offset, value); | |
| lp3943_gpio->input_mask &= ~BIT(offset); | |
| return 0; | |
| } | |
| static const struct gpio_chip lp3943_gpio_chip = { | |
| .label = "lp3943", | |
| .owner = THIS_MODULE, | |
| .request = lp3943_gpio_request, | |
| .free = lp3943_gpio_free, | |
| .direction_input = lp3943_gpio_direction_input, | |
| .get = lp3943_gpio_get, | |
| .direction_output = lp3943_gpio_direction_output, | |
| .set = lp3943_gpio_set, | |
| .base = -1, | |
| .ngpio = LP3943_MAX_GPIO, | |
| .can_sleep = 1, | |
| }; | |
| static int lp3943_gpio_probe(struct platform_device *pdev) | |
| { | |
| struct lp3943 *lp3943 = dev_get_drvdata(pdev->dev.parent); | |
| struct lp3943_gpio *lp3943_gpio; | |
| lp3943_gpio = devm_kzalloc(&pdev->dev, sizeof(*lp3943_gpio), | |
| GFP_KERNEL); | |
| if (!lp3943_gpio) | |
| return -ENOMEM; | |
| lp3943_gpio->lp3943 = lp3943; | |
| lp3943_gpio->chip = lp3943_gpio_chip; | |
| lp3943_gpio->chip.parent = &pdev->dev; | |
| platform_set_drvdata(pdev, lp3943_gpio); | |
| return devm_gpiochip_add_data(&pdev->dev, &lp3943_gpio->chip, | |
| lp3943_gpio); | |
| } | |
| static const struct of_device_id lp3943_gpio_of_match[] = { | |
| { .compatible = "ti,lp3943-gpio", }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, lp3943_gpio_of_match); | |
| static struct platform_driver lp3943_gpio_driver = { | |
| .probe = lp3943_gpio_probe, | |
| .driver = { | |
| .name = "lp3943-gpio", | |
| .of_match_table = lp3943_gpio_of_match, | |
| }, | |
| }; | |
| module_platform_driver(lp3943_gpio_driver); | |
| MODULE_DESCRIPTION("LP3943 GPIO driver"); | |
| MODULE_ALIAS("platform:lp3943-gpio"); | |
| MODULE_AUTHOR("Milo Kim"); | |
| MODULE_LICENSE("GPL"); |