| /* | |
| * Copyright (C) 2006 Juergen Beisert, Pengutronix | |
| * Copyright (C) 2008 Guennadi Liakhovetski, Pengutronix | |
| * Copyright (C) 2009 Wolfram Sang, Pengutronix | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| * | |
| * Check max730x.c for further details. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/mutex.h> | |
| #include <linux/slab.h> | |
| #include <linux/spi/spi.h> | |
| #include <linux/spi/max7301.h> | |
| /* A write to the MAX7301 means one message with one transfer */ | |
| static int max7301_spi_write(struct device *dev, unsigned int reg, | |
| unsigned int val) | |
| { | |
| struct spi_device *spi = to_spi_device(dev); | |
| u16 word = ((reg & 0x7F) << 8) | (val & 0xFF); | |
| return spi_write(spi, (const u8 *)&word, sizeof(word)); | |
| } | |
| /* A read from the MAX7301 means two transfers; here, one message each */ | |
| static int max7301_spi_read(struct device *dev, unsigned int reg) | |
| { | |
| int ret; | |
| u16 word; | |
| struct spi_device *spi = to_spi_device(dev); | |
| word = 0x8000 | (reg << 8); | |
| ret = spi_write(spi, (const u8 *)&word, sizeof(word)); | |
| if (ret) | |
| return ret; | |
| /* | |
| * This relies on the fact, that a transfer with NULL tx_buf shifts out | |
| * zero bytes (=NOOP for MAX7301) | |
| */ | |
| ret = spi_read(spi, (u8 *)&word, sizeof(word)); | |
| if (ret) | |
| return ret; | |
| return word & 0xff; | |
| } | |
| static int max7301_probe(struct spi_device *spi) | |
| { | |
| struct max7301 *ts; | |
| int ret; | |
| /* bits_per_word cannot be configured in platform data */ | |
| spi->bits_per_word = 16; | |
| ret = spi_setup(spi); | |
| if (ret < 0) | |
| return ret; | |
| ts = devm_kzalloc(&spi->dev, sizeof(struct max7301), GFP_KERNEL); | |
| if (!ts) | |
| return -ENOMEM; | |
| ts->read = max7301_spi_read; | |
| ts->write = max7301_spi_write; | |
| ts->dev = &spi->dev; | |
| ret = __max730x_probe(ts); | |
| return ret; | |
| } | |
| static int max7301_remove(struct spi_device *spi) | |
| { | |
| return __max730x_remove(&spi->dev); | |
| } | |
| static const struct spi_device_id max7301_id[] = { | |
| { "max7301", 0 }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(spi, max7301_id); | |
| static struct spi_driver max7301_driver = { | |
| .driver = { | |
| .name = "max7301", | |
| }, | |
| .probe = max7301_probe, | |
| .remove = max7301_remove, | |
| .id_table = max7301_id, | |
| }; | |
| static int __init max7301_init(void) | |
| { | |
| return spi_register_driver(&max7301_driver); | |
| } | |
| /* register after spi postcore initcall and before | |
| * subsys initcalls that may rely on these GPIOs | |
| */ | |
| subsys_initcall(max7301_init); | |
| static void __exit max7301_exit(void) | |
| { | |
| spi_unregister_driver(&max7301_driver); | |
| } | |
| module_exit(max7301_exit); | |
| MODULE_AUTHOR("Juergen Beisert, Wolfram Sang"); | |
| MODULE_LICENSE("GPL v2"); | |
| MODULE_DESCRIPTION("MAX7301 GPIO-Expander"); |