| /* | |
| * GPIO Testing Device Driver | |
| * | |
| * Copyright (C) 2014 Kamlakant Patel <kamlakant.patel@broadcom.com> | |
| * Copyright (C) 2015-2016 Bamvor Jian Zhang <bamvor.zhangjian@linaro.org> | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| * | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include <linux/gpio/driver.h> | |
| #include <linux/platform_device.h> | |
| #define GPIO_NAME "gpio-mockup" | |
| #define MAX_GC 10 | |
| enum direction { | |
| OUT, | |
| IN | |
| }; | |
| /* | |
| * struct gpio_pin_status - structure describing a GPIO status | |
| * @dir: Configures direction of gpio as "in" or "out", 0=in, 1=out | |
| * @value: Configures status of the gpio as 0(low) or 1(high) | |
| */ | |
| struct gpio_pin_status { | |
| enum direction dir; | |
| bool value; | |
| }; | |
| struct mockup_gpio_controller { | |
| struct gpio_chip gc; | |
| struct gpio_pin_status *stats; | |
| }; | |
| static int gpio_mockup_ranges[MAX_GC << 1]; | |
| static int gpio_mockup_params_nr; | |
| module_param_array(gpio_mockup_ranges, int, &gpio_mockup_params_nr, 0400); | |
| const char pins_name_start = 'A'; | |
| static int mockup_gpio_get(struct gpio_chip *gc, unsigned int offset) | |
| { | |
| struct mockup_gpio_controller *cntr = gpiochip_get_data(gc); | |
| return cntr->stats[offset].value; | |
| } | |
| static void mockup_gpio_set(struct gpio_chip *gc, unsigned int offset, | |
| int value) | |
| { | |
| struct mockup_gpio_controller *cntr = gpiochip_get_data(gc); | |
| cntr->stats[offset].value = !!value; | |
| } | |
| static int mockup_gpio_dirout(struct gpio_chip *gc, unsigned int offset, | |
| int value) | |
| { | |
| struct mockup_gpio_controller *cntr = gpiochip_get_data(gc); | |
| mockup_gpio_set(gc, offset, value); | |
| cntr->stats[offset].dir = OUT; | |
| return 0; | |
| } | |
| static int mockup_gpio_dirin(struct gpio_chip *gc, unsigned int offset) | |
| { | |
| struct mockup_gpio_controller *cntr = gpiochip_get_data(gc); | |
| cntr->stats[offset].dir = IN; | |
| return 0; | |
| } | |
| static int mockup_gpio_get_direction(struct gpio_chip *gc, unsigned int offset) | |
| { | |
| struct mockup_gpio_controller *cntr = gpiochip_get_data(gc); | |
| return cntr->stats[offset].dir; | |
| } | |
| static int mockup_gpio_add(struct device *dev, | |
| struct mockup_gpio_controller *cntr, | |
| const char *name, int base, int ngpio) | |
| { | |
| int ret; | |
| cntr->gc.base = base; | |
| cntr->gc.ngpio = ngpio; | |
| cntr->gc.label = name; | |
| cntr->gc.owner = THIS_MODULE; | |
| cntr->gc.parent = dev; | |
| cntr->gc.get = mockup_gpio_get; | |
| cntr->gc.set = mockup_gpio_set; | |
| cntr->gc.direction_output = mockup_gpio_dirout; | |
| cntr->gc.direction_input = mockup_gpio_dirin; | |
| cntr->gc.get_direction = mockup_gpio_get_direction; | |
| cntr->stats = devm_kzalloc(dev, sizeof(*cntr->stats) * cntr->gc.ngpio, | |
| GFP_KERNEL); | |
| if (!cntr->stats) { | |
| ret = -ENOMEM; | |
| goto err; | |
| } | |
| ret = devm_gpiochip_add_data(dev, &cntr->gc, cntr); | |
| if (ret) | |
| goto err; | |
| dev_info(dev, "gpio<%d..%d> add successful!", base, base + ngpio); | |
| return 0; | |
| err: | |
| dev_err(dev, "gpio<%d..%d> add failed!", base, base + ngpio); | |
| return ret; | |
| } | |
| static int mockup_gpio_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct mockup_gpio_controller *cntr; | |
| int ret; | |
| int i; | |
| int base; | |
| int ngpio; | |
| char chip_name[sizeof(GPIO_NAME) + 3]; | |
| if (gpio_mockup_params_nr < 2) | |
| return -EINVAL; | |
| cntr = devm_kzalloc(dev, sizeof(*cntr) * (gpio_mockup_params_nr >> 1), | |
| GFP_KERNEL); | |
| if (!cntr) | |
| return -ENOMEM; | |
| platform_set_drvdata(pdev, cntr); | |
| for (i = 0; i < gpio_mockup_params_nr >> 1; i++) { | |
| base = gpio_mockup_ranges[i * 2]; | |
| if (base == -1) | |
| ngpio = gpio_mockup_ranges[i * 2 + 1]; | |
| else | |
| ngpio = gpio_mockup_ranges[i * 2 + 1] - base; | |
| if (ngpio >= 0) { | |
| sprintf(chip_name, "%s-%c", GPIO_NAME, | |
| pins_name_start + i); | |
| ret = mockup_gpio_add(dev, &cntr[i], | |
| chip_name, base, ngpio); | |
| } else { | |
| ret = -1; | |
| } | |
| if (ret) { | |
| if (base < 0) | |
| dev_err(dev, "gpio<%d..%d> add failed\n", | |
| base, ngpio); | |
| else | |
| dev_err(dev, "gpio<%d..%d> add failed\n", | |
| base, base + ngpio); | |
| return ret; | |
| } | |
| } | |
| return 0; | |
| } | |
| static struct platform_driver mockup_gpio_driver = { | |
| .driver = { | |
| .name = GPIO_NAME, | |
| }, | |
| .probe = mockup_gpio_probe, | |
| }; | |
| static struct platform_device *pdev; | |
| static int __init mock_device_init(void) | |
| { | |
| int err; | |
| pdev = platform_device_alloc(GPIO_NAME, -1); | |
| if (!pdev) | |
| return -ENOMEM; | |
| err = platform_device_add(pdev); | |
| if (err) { | |
| platform_device_put(pdev); | |
| return err; | |
| } | |
| err = platform_driver_register(&mockup_gpio_driver); | |
| if (err) { | |
| platform_device_unregister(pdev); | |
| return err; | |
| } | |
| return 0; | |
| } | |
| static void __exit mock_device_exit(void) | |
| { | |
| platform_driver_unregister(&mockup_gpio_driver); | |
| platform_device_unregister(pdev); | |
| } | |
| module_init(mock_device_init); | |
| module_exit(mock_device_exit); | |
| MODULE_AUTHOR("Kamlakant Patel <kamlakant.patel@broadcom.com>"); | |
| MODULE_AUTHOR("Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>"); | |
| MODULE_DESCRIPTION("GPIO Testing driver"); | |
| MODULE_LICENSE("GPL v2"); |