| /* | |
| * GPIO driver for the SMSC SCH311x Super-I/O chips | |
| * | |
| * Copyright (C) 2013 Bruno Randolf <br1@einfach.org> | |
| * | |
| * SuperIO functions and chip detection: | |
| * (c) Copyright 2008 Wim Van Sebroeck <wim@iguana.be>. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| */ | |
| #include <linux/ioport.h> | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/gpio.h> | |
| #include <linux/bitops.h> | |
| #include <linux/io.h> | |
| #define DRV_NAME "gpio-sch311x" | |
| #define SCH311X_GPIO_CONF_OUT 0x00 | |
| #define SCH311X_GPIO_CONF_IN 0x01 | |
| #define SCH311X_GPIO_CONF_INVERT 0x02 | |
| #define SCH311X_GPIO_CONF_OPEN_DRAIN 0x80 | |
| #define SIO_CONFIG_KEY_ENTER 0x55 | |
| #define SIO_CONFIG_KEY_EXIT 0xaa | |
| #define GP1 0x4b | |
| static int sch311x_ioports[] = { 0x2e, 0x4e, 0x162e, 0x164e }; | |
| static struct platform_device *sch311x_gpio_pdev; | |
| struct sch311x_pdev_data { /* platform device data */ | |
| unsigned short runtime_reg; /* runtime register base address */ | |
| }; | |
| struct sch311x_gpio_block { /* one GPIO block runtime data */ | |
| struct gpio_chip chip; | |
| unsigned short data_reg; /* from definition below */ | |
| unsigned short *config_regs; /* pointer to definition below */ | |
| unsigned short runtime_reg; /* runtime register */ | |
| spinlock_t lock; /* lock for this GPIO block */ | |
| }; | |
| struct sch311x_gpio_priv { /* driver private data */ | |
| struct sch311x_gpio_block blocks[6]; | |
| }; | |
| struct sch311x_gpio_block_def { /* register address definitions */ | |
| unsigned short data_reg; | |
| unsigned short config_regs[8]; | |
| unsigned short base; | |
| }; | |
| /* Note: some GPIOs are not available, these are marked with 0x00 */ | |
| static struct sch311x_gpio_block_def sch311x_gpio_blocks[] = { | |
| { | |
| .data_reg = 0x4b, /* GP1 */ | |
| .config_regs = {0x23, 0x24, 0x25, 0x26, 0x27, 0x29, 0x2a, 0x2b}, | |
| .base = 10, | |
| }, | |
| { | |
| .data_reg = 0x4c, /* GP2 */ | |
| .config_regs = {0x00, 0x2c, 0x2d, 0x00, 0x00, 0x00, 0x00, 0x32}, | |
| .base = 20, | |
| }, | |
| { | |
| .data_reg = 0x4d, /* GP3 */ | |
| .config_regs = {0x33, 0x34, 0x35, 0x36, 0x37, 0x00, 0x39, 0x3a}, | |
| .base = 30, | |
| }, | |
| { | |
| .data_reg = 0x4e, /* GP4 */ | |
| .config_regs = {0x3b, 0x00, 0x3d, 0x00, 0x6e, 0x6f, 0x72, 0x73}, | |
| .base = 40, | |
| }, | |
| { | |
| .data_reg = 0x4f, /* GP5 */ | |
| .config_regs = {0x3f, 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46}, | |
| .base = 50, | |
| }, | |
| { | |
| .data_reg = 0x50, /* GP6 */ | |
| .config_regs = {0x47, 0x48, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59}, | |
| .base = 60, | |
| }, | |
| }; | |
| /* | |
| * Super-IO functions | |
| */ | |
| static inline int sch311x_sio_enter(int sio_config_port) | |
| { | |
| /* Don't step on other drivers' I/O space by accident. */ | |
| if (!request_muxed_region(sio_config_port, 2, DRV_NAME)) { | |
| pr_err(DRV_NAME "I/O address 0x%04x already in use\n", | |
| sio_config_port); | |
| return -EBUSY; | |
| } | |
| outb(SIO_CONFIG_KEY_ENTER, sio_config_port); | |
| return 0; | |
| } | |
| static inline void sch311x_sio_exit(int sio_config_port) | |
| { | |
| outb(SIO_CONFIG_KEY_EXIT, sio_config_port); | |
| release_region(sio_config_port, 2); | |
| } | |
| static inline int sch311x_sio_inb(int sio_config_port, int reg) | |
| { | |
| outb(reg, sio_config_port); | |
| return inb(sio_config_port + 1); | |
| } | |
| static inline void sch311x_sio_outb(int sio_config_port, int reg, int val) | |
| { | |
| outb(reg, sio_config_port); | |
| outb(val, sio_config_port + 1); | |
| } | |
| /* | |
| * GPIO functions | |
| */ | |
| static int sch311x_gpio_request(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct sch311x_gpio_block *block = gpiochip_get_data(chip); | |
| if (block->config_regs[offset] == 0) /* GPIO is not available */ | |
| return -ENODEV; | |
| if (!request_region(block->runtime_reg + block->config_regs[offset], | |
| 1, DRV_NAME)) { | |
| dev_err(chip->parent, "Failed to request region 0x%04x.\n", | |
| block->runtime_reg + block->config_regs[offset]); | |
| return -EBUSY; | |
| } | |
| return 0; | |
| } | |
| static void sch311x_gpio_free(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct sch311x_gpio_block *block = gpiochip_get_data(chip); | |
| if (block->config_regs[offset] == 0) /* GPIO is not available */ | |
| return; | |
| release_region(block->runtime_reg + block->config_regs[offset], 1); | |
| } | |
| static int sch311x_gpio_get(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct sch311x_gpio_block *block = gpiochip_get_data(chip); | |
| unsigned char data; | |
| spin_lock(&block->lock); | |
| data = inb(block->runtime_reg + block->data_reg); | |
| spin_unlock(&block->lock); | |
| return !!(data & BIT(offset)); | |
| } | |
| static void __sch311x_gpio_set(struct sch311x_gpio_block *block, | |
| unsigned offset, int value) | |
| { | |
| unsigned char data = inb(block->runtime_reg + block->data_reg); | |
| if (value) | |
| data |= BIT(offset); | |
| else | |
| data &= ~BIT(offset); | |
| outb(data, block->runtime_reg + block->data_reg); | |
| } | |
| static void sch311x_gpio_set(struct gpio_chip *chip, unsigned offset, | |
| int value) | |
| { | |
| struct sch311x_gpio_block *block = gpiochip_get_data(chip); | |
| spin_lock(&block->lock); | |
| __sch311x_gpio_set(block, offset, value); | |
| spin_unlock(&block->lock); | |
| } | |
| static int sch311x_gpio_direction_in(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct sch311x_gpio_block *block = gpiochip_get_data(chip); | |
| spin_lock(&block->lock); | |
| outb(SCH311X_GPIO_CONF_IN, block->runtime_reg + | |
| block->config_regs[offset]); | |
| spin_unlock(&block->lock); | |
| return 0; | |
| } | |
| static int sch311x_gpio_direction_out(struct gpio_chip *chip, unsigned offset, | |
| int value) | |
| { | |
| struct sch311x_gpio_block *block = gpiochip_get_data(chip); | |
| spin_lock(&block->lock); | |
| outb(SCH311X_GPIO_CONF_OUT, block->runtime_reg + | |
| block->config_regs[offset]); | |
| __sch311x_gpio_set(block, offset, value); | |
| spin_unlock(&block->lock); | |
| return 0; | |
| } | |
| static int sch311x_gpio_probe(struct platform_device *pdev) | |
| { | |
| struct sch311x_pdev_data *pdata = dev_get_platdata(&pdev->dev); | |
| struct sch311x_gpio_priv *priv; | |
| struct sch311x_gpio_block *block; | |
| int err, i; | |
| /* we can register all GPIO data registers at once */ | |
| if (!devm_request_region(&pdev->dev, pdata->runtime_reg + GP1, 6, | |
| DRV_NAME)) { | |
| dev_err(&pdev->dev, "Failed to request region 0x%04x-0x%04x.\n", | |
| pdata->runtime_reg + GP1, pdata->runtime_reg + GP1 + 5); | |
| return -EBUSY; | |
| } | |
| priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); | |
| if (!priv) | |
| return -ENOMEM; | |
| platform_set_drvdata(pdev, priv); | |
| for (i = 0; i < ARRAY_SIZE(priv->blocks); i++) { | |
| block = &priv->blocks[i]; | |
| spin_lock_init(&block->lock); | |
| block->chip.label = DRV_NAME; | |
| block->chip.owner = THIS_MODULE; | |
| block->chip.request = sch311x_gpio_request; | |
| block->chip.free = sch311x_gpio_free; | |
| block->chip.direction_input = sch311x_gpio_direction_in; | |
| block->chip.direction_output = sch311x_gpio_direction_out; | |
| block->chip.get = sch311x_gpio_get; | |
| block->chip.set = sch311x_gpio_set; | |
| block->chip.ngpio = 8; | |
| block->chip.parent = &pdev->dev; | |
| block->chip.base = sch311x_gpio_blocks[i].base; | |
| block->config_regs = sch311x_gpio_blocks[i].config_regs; | |
| block->data_reg = sch311x_gpio_blocks[i].data_reg; | |
| block->runtime_reg = pdata->runtime_reg; | |
| err = gpiochip_add_data(&block->chip, block); | |
| if (err < 0) { | |
| dev_err(&pdev->dev, | |
| "Could not register gpiochip, %d\n", err); | |
| goto exit_err; | |
| } | |
| dev_info(&pdev->dev, | |
| "SMSC SCH311x GPIO block %d registered.\n", i); | |
| } | |
| return 0; | |
| exit_err: | |
| /* release already registered chips */ | |
| for (--i; i >= 0; i--) | |
| gpiochip_remove(&priv->blocks[i].chip); | |
| return err; | |
| } | |
| static int sch311x_gpio_remove(struct platform_device *pdev) | |
| { | |
| struct sch311x_gpio_priv *priv = platform_get_drvdata(pdev); | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(priv->blocks); i++) { | |
| gpiochip_remove(&priv->blocks[i].chip); | |
| dev_info(&pdev->dev, | |
| "SMSC SCH311x GPIO block %d unregistered.\n", i); | |
| } | |
| return 0; | |
| } | |
| static struct platform_driver sch311x_gpio_driver = { | |
| .driver.name = DRV_NAME, | |
| .probe = sch311x_gpio_probe, | |
| .remove = sch311x_gpio_remove, | |
| }; | |
| /* | |
| * Init & exit routines | |
| */ | |
| static int __init sch311x_detect(int sio_config_port, unsigned short *addr) | |
| { | |
| int err = 0, reg; | |
| unsigned short base_addr; | |
| unsigned char dev_id; | |
| err = sch311x_sio_enter(sio_config_port); | |
| if (err) | |
| return err; | |
| /* Check device ID. */ | |
| reg = sch311x_sio_inb(sio_config_port, 0x20); | |
| switch (reg) { | |
| case 0x7c: /* SCH3112 */ | |
| dev_id = 2; | |
| break; | |
| case 0x7d: /* SCH3114 */ | |
| dev_id = 4; | |
| break; | |
| case 0x7f: /* SCH3116 */ | |
| dev_id = 6; | |
| break; | |
| default: | |
| err = -ENODEV; | |
| goto exit; | |
| } | |
| /* Select logical device A (runtime registers) */ | |
| sch311x_sio_outb(sio_config_port, 0x07, 0x0a); | |
| /* Check if Logical Device Register is currently active */ | |
| if ((sch311x_sio_inb(sio_config_port, 0x30) & 0x01) == 0) | |
| pr_info("Seems that LDN 0x0a is not active...\n"); | |
| /* Get the base address of the runtime registers */ | |
| base_addr = (sch311x_sio_inb(sio_config_port, 0x60) << 8) | | |
| sch311x_sio_inb(sio_config_port, 0x61); | |
| if (!base_addr) { | |
| pr_err("Base address not set\n"); | |
| err = -ENODEV; | |
| goto exit; | |
| } | |
| *addr = base_addr; | |
| pr_info("Found an SMSC SCH311%d chip at 0x%04x\n", dev_id, base_addr); | |
| exit: | |
| sch311x_sio_exit(sio_config_port); | |
| return err; | |
| } | |
| static int __init sch311x_gpio_pdev_add(const unsigned short addr) | |
| { | |
| struct sch311x_pdev_data pdata; | |
| int err; | |
| pdata.runtime_reg = addr; | |
| sch311x_gpio_pdev = platform_device_alloc(DRV_NAME, -1); | |
| if (!sch311x_gpio_pdev) | |
| return -ENOMEM; | |
| err = platform_device_add_data(sch311x_gpio_pdev, | |
| &pdata, sizeof(pdata)); | |
| if (err) { | |
| pr_err(DRV_NAME "Platform data allocation failed\n"); | |
| goto err; | |
| } | |
| err = platform_device_add(sch311x_gpio_pdev); | |
| if (err) { | |
| pr_err(DRV_NAME "Device addition failed\n"); | |
| goto err; | |
| } | |
| return 0; | |
| err: | |
| platform_device_put(sch311x_gpio_pdev); | |
| return err; | |
| } | |
| static int __init sch311x_gpio_init(void) | |
| { | |
| int err, i; | |
| unsigned short addr = 0; | |
| for (i = 0; i < ARRAY_SIZE(sch311x_ioports); i++) | |
| if (sch311x_detect(sch311x_ioports[i], &addr) == 0) | |
| break; | |
| if (!addr) | |
| return -ENODEV; | |
| err = platform_driver_register(&sch311x_gpio_driver); | |
| if (err) | |
| return err; | |
| err = sch311x_gpio_pdev_add(addr); | |
| if (err) | |
| goto unreg_platform_driver; | |
| return 0; | |
| unreg_platform_driver: | |
| platform_driver_unregister(&sch311x_gpio_driver); | |
| return err; | |
| } | |
| static void __exit sch311x_gpio_exit(void) | |
| { | |
| platform_device_unregister(sch311x_gpio_pdev); | |
| platform_driver_unregister(&sch311x_gpio_driver); | |
| } | |
| module_init(sch311x_gpio_init); | |
| module_exit(sch311x_gpio_exit); | |
| MODULE_AUTHOR("Bruno Randolf <br1@einfach.org>"); | |
| MODULE_DESCRIPTION("SMSC SCH311x GPIO Driver"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_ALIAS("platform:gpio-sch311x"); |