| /* | |
| * Copyright (C) ST-Ericsson SA 2010 | |
| * | |
| * License Terms: GNU General Public License, version 2 | |
| * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/slab.h> | |
| #include <linux/gpio.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/of.h> | |
| #include <linux/mfd/stmpe.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/bitops.h> | |
| /* | |
| * These registers are modified under the irq bus lock and cached to avoid | |
| * unnecessary writes in bus_sync_unlock. | |
| */ | |
| enum { REG_RE, REG_FE, REG_IE }; | |
| enum { LSB, CSB, MSB }; | |
| #define CACHE_NR_REGS 3 | |
| /* No variant has more than 24 GPIOs */ | |
| #define CACHE_NR_BANKS (24 / 8) | |
| struct stmpe_gpio { | |
| struct gpio_chip chip; | |
| struct stmpe *stmpe; | |
| struct device *dev; | |
| struct mutex irq_lock; | |
| u32 norequest_mask; | |
| /* Caches of interrupt control registers for bus_lock */ | |
| u8 regs[CACHE_NR_REGS][CACHE_NR_BANKS]; | |
| u8 oldregs[CACHE_NR_REGS][CACHE_NR_BANKS]; | |
| }; | |
| static int stmpe_gpio_get(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); | |
| struct stmpe *stmpe = stmpe_gpio->stmpe; | |
| u8 reg = stmpe->regs[STMPE_IDX_GPMR_LSB + (offset / 8)]; | |
| u8 mask = BIT(offset % 8); | |
| int ret; | |
| ret = stmpe_reg_read(stmpe, reg); | |
| if (ret < 0) | |
| return ret; | |
| return !!(ret & mask); | |
| } | |
| static void stmpe_gpio_set(struct gpio_chip *chip, unsigned offset, int val) | |
| { | |
| struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); | |
| struct stmpe *stmpe = stmpe_gpio->stmpe; | |
| int which = val ? STMPE_IDX_GPSR_LSB : STMPE_IDX_GPCR_LSB; | |
| u8 reg = stmpe->regs[which + (offset / 8)]; | |
| u8 mask = BIT(offset % 8); | |
| /* | |
| * Some variants have single register for gpio set/clear functionality. | |
| * For them we need to write 0 to clear and 1 to set. | |
| */ | |
| if (stmpe->regs[STMPE_IDX_GPSR_LSB] == stmpe->regs[STMPE_IDX_GPCR_LSB]) | |
| stmpe_set_bits(stmpe, reg, mask, val ? mask : 0); | |
| else | |
| stmpe_reg_write(stmpe, reg, mask); | |
| } | |
| static int stmpe_gpio_get_direction(struct gpio_chip *chip, | |
| unsigned offset) | |
| { | |
| struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); | |
| struct stmpe *stmpe = stmpe_gpio->stmpe; | |
| u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8); | |
| u8 mask = BIT(offset % 8); | |
| int ret; | |
| ret = stmpe_reg_read(stmpe, reg); | |
| if (ret < 0) | |
| return ret; | |
| return !(ret & mask); | |
| } | |
| static int stmpe_gpio_direction_output(struct gpio_chip *chip, | |
| unsigned offset, int val) | |
| { | |
| struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); | |
| struct stmpe *stmpe = stmpe_gpio->stmpe; | |
| u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)]; | |
| u8 mask = BIT(offset % 8); | |
| stmpe_gpio_set(chip, offset, val); | |
| return stmpe_set_bits(stmpe, reg, mask, mask); | |
| } | |
| static int stmpe_gpio_direction_input(struct gpio_chip *chip, | |
| unsigned offset) | |
| { | |
| struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); | |
| struct stmpe *stmpe = stmpe_gpio->stmpe; | |
| u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)]; | |
| u8 mask = BIT(offset % 8); | |
| return stmpe_set_bits(stmpe, reg, mask, 0); | |
| } | |
| static int stmpe_gpio_request(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); | |
| struct stmpe *stmpe = stmpe_gpio->stmpe; | |
| if (stmpe_gpio->norequest_mask & BIT(offset)) | |
| return -EINVAL; | |
| return stmpe_set_altfunc(stmpe, BIT(offset), STMPE_BLOCK_GPIO); | |
| } | |
| static const struct gpio_chip template_chip = { | |
| .label = "stmpe", | |
| .owner = THIS_MODULE, | |
| .get_direction = stmpe_gpio_get_direction, | |
| .direction_input = stmpe_gpio_direction_input, | |
| .get = stmpe_gpio_get, | |
| .direction_output = stmpe_gpio_direction_output, | |
| .set = stmpe_gpio_set, | |
| .request = stmpe_gpio_request, | |
| .can_sleep = true, | |
| }; | |
| static int stmpe_gpio_irq_set_type(struct irq_data *d, unsigned int type) | |
| { | |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); | |
| struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); | |
| int offset = d->hwirq; | |
| int regoffset = offset / 8; | |
| int mask = BIT(offset % 8); | |
| if (type & IRQ_TYPE_LEVEL_LOW || type & IRQ_TYPE_LEVEL_HIGH) | |
| return -EINVAL; | |
| /* STMPE801 and STMPE 1600 don't have RE and FE registers */ | |
| if (stmpe_gpio->stmpe->partnum == STMPE801 || | |
| stmpe_gpio->stmpe->partnum == STMPE1600) | |
| return 0; | |
| if (type & IRQ_TYPE_EDGE_RISING) | |
| stmpe_gpio->regs[REG_RE][regoffset] |= mask; | |
| else | |
| stmpe_gpio->regs[REG_RE][regoffset] &= ~mask; | |
| if (type & IRQ_TYPE_EDGE_FALLING) | |
| stmpe_gpio->regs[REG_FE][regoffset] |= mask; | |
| else | |
| stmpe_gpio->regs[REG_FE][regoffset] &= ~mask; | |
| return 0; | |
| } | |
| static void stmpe_gpio_irq_lock(struct irq_data *d) | |
| { | |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); | |
| struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); | |
| mutex_lock(&stmpe_gpio->irq_lock); | |
| } | |
| static void stmpe_gpio_irq_sync_unlock(struct irq_data *d) | |
| { | |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); | |
| struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); | |
| struct stmpe *stmpe = stmpe_gpio->stmpe; | |
| int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8); | |
| static const u8 regmap[CACHE_NR_REGS][CACHE_NR_BANKS] = { | |
| [REG_RE][LSB] = STMPE_IDX_GPRER_LSB, | |
| [REG_RE][CSB] = STMPE_IDX_GPRER_CSB, | |
| [REG_RE][MSB] = STMPE_IDX_GPRER_MSB, | |
| [REG_FE][LSB] = STMPE_IDX_GPFER_LSB, | |
| [REG_FE][CSB] = STMPE_IDX_GPFER_CSB, | |
| [REG_FE][MSB] = STMPE_IDX_GPFER_MSB, | |
| [REG_IE][LSB] = STMPE_IDX_IEGPIOR_LSB, | |
| [REG_IE][CSB] = STMPE_IDX_IEGPIOR_CSB, | |
| [REG_IE][MSB] = STMPE_IDX_IEGPIOR_MSB, | |
| }; | |
| int i, j; | |
| for (i = 0; i < CACHE_NR_REGS; i++) { | |
| /* STMPE801 and STMPE1600 don't have RE and FE registers */ | |
| if ((stmpe->partnum == STMPE801 || | |
| stmpe->partnum == STMPE1600) && | |
| (i != REG_IE)) | |
| continue; | |
| for (j = 0; j < num_banks; j++) { | |
| u8 old = stmpe_gpio->oldregs[i][j]; | |
| u8 new = stmpe_gpio->regs[i][j]; | |
| if (new == old) | |
| continue; | |
| stmpe_gpio->oldregs[i][j] = new; | |
| stmpe_reg_write(stmpe, stmpe->regs[regmap[i][j]], new); | |
| } | |
| } | |
| mutex_unlock(&stmpe_gpio->irq_lock); | |
| } | |
| static void stmpe_gpio_irq_mask(struct irq_data *d) | |
| { | |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); | |
| struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); | |
| int offset = d->hwirq; | |
| int regoffset = offset / 8; | |
| int mask = BIT(offset % 8); | |
| stmpe_gpio->regs[REG_IE][regoffset] &= ~mask; | |
| } | |
| static void stmpe_gpio_irq_unmask(struct irq_data *d) | |
| { | |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); | |
| struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); | |
| struct stmpe *stmpe = stmpe_gpio->stmpe; | |
| int offset = d->hwirq; | |
| int regoffset = offset / 8; | |
| int mask = BIT(offset % 8); | |
| stmpe_gpio->regs[REG_IE][regoffset] |= mask; | |
| /* | |
| * STMPE1600 workaround: to be able to get IRQ from pins, | |
| * a read must be done on GPMR register, or a write in | |
| * GPSR or GPCR registers | |
| */ | |
| if (stmpe->partnum == STMPE1600) | |
| stmpe_reg_read(stmpe, | |
| stmpe->regs[STMPE_IDX_GPMR_LSB + regoffset]); | |
| } | |
| static void stmpe_dbg_show_one(struct seq_file *s, | |
| struct gpio_chip *gc, | |
| unsigned offset, unsigned gpio) | |
| { | |
| struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); | |
| struct stmpe *stmpe = stmpe_gpio->stmpe; | |
| const char *label = gpiochip_is_requested(gc, offset); | |
| bool val = !!stmpe_gpio_get(gc, offset); | |
| u8 bank = offset / 8; | |
| u8 dir_reg = stmpe->regs[STMPE_IDX_GPDR_LSB + bank]; | |
| u8 mask = BIT(offset % 8); | |
| int ret; | |
| u8 dir; | |
| ret = stmpe_reg_read(stmpe, dir_reg); | |
| if (ret < 0) | |
| return; | |
| dir = !!(ret & mask); | |
| if (dir) { | |
| seq_printf(s, " gpio-%-3d (%-20.20s) out %s", | |
| gpio, label ?: "(none)", | |
| val ? "hi" : "lo"); | |
| } else { | |
| u8 edge_det_reg; | |
| u8 rise_reg; | |
| u8 fall_reg; | |
| u8 irqen_reg; | |
| char *edge_det_values[] = {"edge-inactive", | |
| "edge-asserted", | |
| "not-supported"}; | |
| char *rise_values[] = {"no-rising-edge-detection", | |
| "rising-edge-detection", | |
| "not-supported"}; | |
| char *fall_values[] = {"no-falling-edge-detection", | |
| "falling-edge-detection", | |
| "not-supported"}; | |
| #define NOT_SUPPORTED_IDX 2 | |
| u8 edge_det = NOT_SUPPORTED_IDX; | |
| u8 rise = NOT_SUPPORTED_IDX; | |
| u8 fall = NOT_SUPPORTED_IDX; | |
| bool irqen; | |
| switch (stmpe->partnum) { | |
| case STMPE610: | |
| case STMPE811: | |
| case STMPE1601: | |
| case STMPE2401: | |
| case STMPE2403: | |
| edge_det_reg = stmpe->regs[STMPE_IDX_GPEDR_LSB + bank]; | |
| ret = stmpe_reg_read(stmpe, edge_det_reg); | |
| if (ret < 0) | |
| return; | |
| edge_det = !!(ret & mask); | |
| case STMPE1801: | |
| rise_reg = stmpe->regs[STMPE_IDX_GPRER_LSB + bank]; | |
| fall_reg = stmpe->regs[STMPE_IDX_GPFER_LSB + bank]; | |
| ret = stmpe_reg_read(stmpe, rise_reg); | |
| if (ret < 0) | |
| return; | |
| rise = !!(ret & mask); | |
| ret = stmpe_reg_read(stmpe, fall_reg); | |
| if (ret < 0) | |
| return; | |
| fall = !!(ret & mask); | |
| case STMPE801: | |
| case STMPE1600: | |
| irqen_reg = stmpe->regs[STMPE_IDX_IEGPIOR_LSB + bank]; | |
| break; | |
| default: | |
| return; | |
| } | |
| ret = stmpe_reg_read(stmpe, irqen_reg); | |
| if (ret < 0) | |
| return; | |
| irqen = !!(ret & mask); | |
| seq_printf(s, " gpio-%-3d (%-20.20s) in %s %13s %13s %25s %25s", | |
| gpio, label ?: "(none)", | |
| val ? "hi" : "lo", | |
| edge_det_values[edge_det], | |
| irqen ? "IRQ-enabled" : "IRQ-disabled", | |
| rise_values[rise], | |
| fall_values[fall]); | |
| } | |
| } | |
| static void stmpe_dbg_show(struct seq_file *s, struct gpio_chip *gc) | |
| { | |
| unsigned i; | |
| unsigned gpio = gc->base; | |
| for (i = 0; i < gc->ngpio; i++, gpio++) { | |
| stmpe_dbg_show_one(s, gc, i, gpio); | |
| seq_printf(s, "\n"); | |
| } | |
| } | |
| static struct irq_chip stmpe_gpio_irq_chip = { | |
| .name = "stmpe-gpio", | |
| .irq_bus_lock = stmpe_gpio_irq_lock, | |
| .irq_bus_sync_unlock = stmpe_gpio_irq_sync_unlock, | |
| .irq_mask = stmpe_gpio_irq_mask, | |
| .irq_unmask = stmpe_gpio_irq_unmask, | |
| .irq_set_type = stmpe_gpio_irq_set_type, | |
| }; | |
| static irqreturn_t stmpe_gpio_irq(int irq, void *dev) | |
| { | |
| struct stmpe_gpio *stmpe_gpio = dev; | |
| struct stmpe *stmpe = stmpe_gpio->stmpe; | |
| u8 statmsbreg; | |
| int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8); | |
| u8 status[num_banks]; | |
| int ret; | |
| int i; | |
| /* | |
| * the stmpe_block_read() call below, imposes to set statmsbreg | |
| * with the register located at the lowest address. As STMPE1600 | |
| * variant is the only one which respect registers address's order | |
| * (LSB regs located at lowest address than MSB ones) whereas all | |
| * the others have a registers layout with MSB located before the | |
| * LSB regs. | |
| */ | |
| if (stmpe->partnum == STMPE1600) | |
| statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_LSB]; | |
| else | |
| statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_MSB]; | |
| ret = stmpe_block_read(stmpe, statmsbreg, num_banks, status); | |
| if (ret < 0) | |
| return IRQ_NONE; | |
| for (i = 0; i < num_banks; i++) { | |
| int bank = (stmpe_gpio->stmpe->partnum == STMPE1600) ? i : | |
| num_banks - i - 1; | |
| unsigned int enabled = stmpe_gpio->regs[REG_IE][bank]; | |
| unsigned int stat = status[i]; | |
| stat &= enabled; | |
| if (!stat) | |
| continue; | |
| while (stat) { | |
| int bit = __ffs(stat); | |
| int line = bank * 8 + bit; | |
| int child_irq = irq_find_mapping(stmpe_gpio->chip.irqdomain, | |
| line); | |
| handle_nested_irq(child_irq); | |
| stat &= ~BIT(bit); | |
| } | |
| /* | |
| * interrupt status register write has no effect on | |
| * 801/1801/1600, bits are cleared when read. | |
| * Edge detect register is not present on 801/1600/1801 | |
| */ | |
| if (stmpe->partnum != STMPE801 && stmpe->partnum != STMPE1600 && | |
| stmpe->partnum != STMPE1801) { | |
| stmpe_reg_write(stmpe, statmsbreg + i, status[i]); | |
| stmpe_reg_write(stmpe, | |
| stmpe->regs[STMPE_IDX_GPEDR_LSB + i], | |
| status[i]); | |
| } | |
| } | |
| return IRQ_HANDLED; | |
| } | |
| static int stmpe_gpio_probe(struct platform_device *pdev) | |
| { | |
| struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent); | |
| struct device_node *np = pdev->dev.of_node; | |
| struct stmpe_gpio *stmpe_gpio; | |
| int ret; | |
| int irq = 0; | |
| irq = platform_get_irq(pdev, 0); | |
| stmpe_gpio = kzalloc(sizeof(struct stmpe_gpio), GFP_KERNEL); | |
| if (!stmpe_gpio) | |
| return -ENOMEM; | |
| mutex_init(&stmpe_gpio->irq_lock); | |
| stmpe_gpio->dev = &pdev->dev; | |
| stmpe_gpio->stmpe = stmpe; | |
| stmpe_gpio->chip = template_chip; | |
| stmpe_gpio->chip.ngpio = stmpe->num_gpios; | |
| stmpe_gpio->chip.parent = &pdev->dev; | |
| stmpe_gpio->chip.of_node = np; | |
| stmpe_gpio->chip.base = -1; | |
| if (IS_ENABLED(CONFIG_DEBUG_FS)) | |
| stmpe_gpio->chip.dbg_show = stmpe_dbg_show; | |
| of_property_read_u32(np, "st,norequest-mask", | |
| &stmpe_gpio->norequest_mask); | |
| if (stmpe_gpio->norequest_mask) | |
| stmpe_gpio->chip.irq_need_valid_mask = true; | |
| if (irq < 0) | |
| dev_info(&pdev->dev, | |
| "device configured in no-irq mode: " | |
| "irqs are not available\n"); | |
| ret = stmpe_enable(stmpe, STMPE_BLOCK_GPIO); | |
| if (ret) | |
| goto out_free; | |
| ret = gpiochip_add_data(&stmpe_gpio->chip, stmpe_gpio); | |
| if (ret) { | |
| dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret); | |
| goto out_disable; | |
| } | |
| if (irq > 0) { | |
| ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, | |
| stmpe_gpio_irq, IRQF_ONESHOT, | |
| "stmpe-gpio", stmpe_gpio); | |
| if (ret) { | |
| dev_err(&pdev->dev, "unable to get irq: %d\n", ret); | |
| goto out_disable; | |
| } | |
| if (stmpe_gpio->norequest_mask) { | |
| int i; | |
| /* Forbid unused lines to be mapped as IRQs */ | |
| for (i = 0; i < sizeof(u32); i++) | |
| if (stmpe_gpio->norequest_mask & BIT(i)) | |
| clear_bit(i, stmpe_gpio->chip.irq_valid_mask); | |
| } | |
| ret = gpiochip_irqchip_add(&stmpe_gpio->chip, | |
| &stmpe_gpio_irq_chip, | |
| 0, | |
| handle_simple_irq, | |
| IRQ_TYPE_NONE); | |
| if (ret) { | |
| dev_err(&pdev->dev, | |
| "could not connect irqchip to gpiochip\n"); | |
| goto out_disable; | |
| } | |
| gpiochip_set_chained_irqchip(&stmpe_gpio->chip, | |
| &stmpe_gpio_irq_chip, | |
| irq, | |
| NULL); | |
| } | |
| platform_set_drvdata(pdev, stmpe_gpio); | |
| return 0; | |
| out_disable: | |
| stmpe_disable(stmpe, STMPE_BLOCK_GPIO); | |
| gpiochip_remove(&stmpe_gpio->chip); | |
| out_free: | |
| kfree(stmpe_gpio); | |
| return ret; | |
| } | |
| static struct platform_driver stmpe_gpio_driver = { | |
| .driver = { | |
| .suppress_bind_attrs = true, | |
| .name = "stmpe-gpio", | |
| }, | |
| .probe = stmpe_gpio_probe, | |
| }; | |
| static int __init stmpe_gpio_init(void) | |
| { | |
| return platform_driver_register(&stmpe_gpio_driver); | |
| } | |
| subsys_initcall(stmpe_gpio_init); |