| /* | |
| * gpiolib support for Wolfson WM831x PMICs | |
| * | |
| * Copyright 2009 Wolfson Microelectronics PLC. | |
| * | |
| * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| * | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/slab.h> | |
| #include <linux/module.h> | |
| #include <linux/gpio.h> | |
| #include <linux/mfd/core.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/mfd/wm831x/core.h> | |
| #include <linux/mfd/wm831x/pdata.h> | |
| #include <linux/mfd/wm831x/gpio.h> | |
| #include <linux/mfd/wm831x/irq.h> | |
| struct wm831x_gpio { | |
| struct wm831x *wm831x; | |
| struct gpio_chip gpio_chip; | |
| }; | |
| static int wm831x_gpio_direction_in(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct wm831x_gpio *wm831x_gpio = gpiochip_get_data(chip); | |
| struct wm831x *wm831x = wm831x_gpio->wm831x; | |
| int val = WM831X_GPN_DIR; | |
| if (wm831x->has_gpio_ena) | |
| val |= WM831X_GPN_TRI; | |
| return wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + offset, | |
| WM831X_GPN_DIR | WM831X_GPN_TRI | | |
| WM831X_GPN_FN_MASK, val); | |
| } | |
| static int wm831x_gpio_get(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct wm831x_gpio *wm831x_gpio = gpiochip_get_data(chip); | |
| struct wm831x *wm831x = wm831x_gpio->wm831x; | |
| int ret; | |
| ret = wm831x_reg_read(wm831x, WM831X_GPIO_LEVEL); | |
| if (ret < 0) | |
| return ret; | |
| if (ret & 1 << offset) | |
| return 1; | |
| else | |
| return 0; | |
| } | |
| static void wm831x_gpio_set(struct gpio_chip *chip, unsigned offset, int value) | |
| { | |
| struct wm831x_gpio *wm831x_gpio = gpiochip_get_data(chip); | |
| struct wm831x *wm831x = wm831x_gpio->wm831x; | |
| wm831x_set_bits(wm831x, WM831X_GPIO_LEVEL, 1 << offset, | |
| value << offset); | |
| } | |
| static int wm831x_gpio_direction_out(struct gpio_chip *chip, | |
| unsigned offset, int value) | |
| { | |
| struct wm831x_gpio *wm831x_gpio = gpiochip_get_data(chip); | |
| struct wm831x *wm831x = wm831x_gpio->wm831x; | |
| int val = 0; | |
| int ret; | |
| if (wm831x->has_gpio_ena) | |
| val |= WM831X_GPN_TRI; | |
| ret = wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + offset, | |
| WM831X_GPN_DIR | WM831X_GPN_TRI | | |
| WM831X_GPN_FN_MASK, val); | |
| if (ret < 0) | |
| return ret; | |
| /* Can only set GPIO state once it's in output mode */ | |
| wm831x_gpio_set(chip, offset, value); | |
| return 0; | |
| } | |
| static int wm831x_gpio_to_irq(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct wm831x_gpio *wm831x_gpio = gpiochip_get_data(chip); | |
| struct wm831x *wm831x = wm831x_gpio->wm831x; | |
| return irq_create_mapping(wm831x->irq_domain, | |
| WM831X_IRQ_GPIO_1 + offset); | |
| } | |
| static int wm831x_gpio_set_debounce(struct gpio_chip *chip, unsigned offset, | |
| unsigned debounce) | |
| { | |
| struct wm831x_gpio *wm831x_gpio = gpiochip_get_data(chip); | |
| struct wm831x *wm831x = wm831x_gpio->wm831x; | |
| int reg = WM831X_GPIO1_CONTROL + offset; | |
| int ret, fn; | |
| ret = wm831x_reg_read(wm831x, reg); | |
| if (ret < 0) | |
| return ret; | |
| switch (ret & WM831X_GPN_FN_MASK) { | |
| case 0: | |
| case 1: | |
| break; | |
| default: | |
| /* Not in GPIO mode */ | |
| return -EBUSY; | |
| } | |
| if (debounce >= 32 && debounce <= 64) | |
| fn = 0; | |
| else if (debounce >= 4000 && debounce <= 8000) | |
| fn = 1; | |
| else | |
| return -EINVAL; | |
| return wm831x_set_bits(wm831x, reg, WM831X_GPN_FN_MASK, fn); | |
| } | |
| static int wm831x_set_single_ended(struct gpio_chip *chip, | |
| unsigned int offset, | |
| enum single_ended_mode mode) | |
| { | |
| struct wm831x_gpio *wm831x_gpio = gpiochip_get_data(chip); | |
| struct wm831x *wm831x = wm831x_gpio->wm831x; | |
| int reg = WM831X_GPIO1_CONTROL + offset; | |
| switch (mode) { | |
| case LINE_MODE_OPEN_DRAIN: | |
| return wm831x_set_bits(wm831x, reg, | |
| WM831X_GPN_OD_MASK, WM831X_GPN_OD); | |
| case LINE_MODE_PUSH_PULL: | |
| return wm831x_set_bits(wm831x, reg, | |
| WM831X_GPN_OD_MASK, 0); | |
| default: | |
| break; | |
| } | |
| return -ENOTSUPP; | |
| } | |
| #ifdef CONFIG_DEBUG_FS | |
| static void wm831x_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) | |
| { | |
| struct wm831x_gpio *wm831x_gpio = gpiochip_get_data(chip); | |
| struct wm831x *wm831x = wm831x_gpio->wm831x; | |
| int i, tristated; | |
| for (i = 0; i < chip->ngpio; i++) { | |
| int gpio = i + chip->base; | |
| int reg; | |
| const char *label, *pull, *powerdomain; | |
| /* We report the GPIO even if it's not requested since | |
| * we're also reporting things like alternate | |
| * functions which apply even when the GPIO is not in | |
| * use as a GPIO. | |
| */ | |
| label = gpiochip_is_requested(chip, i); | |
| if (!label) | |
| label = "Unrequested"; | |
| seq_printf(s, " gpio-%-3d (%-20.20s) ", gpio, label); | |
| reg = wm831x_reg_read(wm831x, WM831X_GPIO1_CONTROL + i); | |
| if (reg < 0) { | |
| dev_err(wm831x->dev, | |
| "GPIO control %d read failed: %d\n", | |
| gpio, reg); | |
| seq_printf(s, "\n"); | |
| continue; | |
| } | |
| switch (reg & WM831X_GPN_PULL_MASK) { | |
| case WM831X_GPIO_PULL_NONE: | |
| pull = "nopull"; | |
| break; | |
| case WM831X_GPIO_PULL_DOWN: | |
| pull = "pulldown"; | |
| break; | |
| case WM831X_GPIO_PULL_UP: | |
| pull = "pullup"; | |
| break; | |
| default: | |
| pull = "INVALID PULL"; | |
| break; | |
| } | |
| switch (i + 1) { | |
| case 1 ... 3: | |
| case 7 ... 9: | |
| if (reg & WM831X_GPN_PWR_DOM) | |
| powerdomain = "VPMIC"; | |
| else | |
| powerdomain = "DBVDD"; | |
| break; | |
| case 4 ... 6: | |
| case 10 ... 12: | |
| if (reg & WM831X_GPN_PWR_DOM) | |
| powerdomain = "SYSVDD"; | |
| else | |
| powerdomain = "DBVDD"; | |
| break; | |
| case 13 ... 16: | |
| powerdomain = "TPVDD"; | |
| break; | |
| default: | |
| BUG(); | |
| break; | |
| } | |
| tristated = reg & WM831X_GPN_TRI; | |
| if (wm831x->has_gpio_ena) | |
| tristated = !tristated; | |
| seq_printf(s, " %s %s %s %s%s\n" | |
| " %s%s (0x%4x)\n", | |
| reg & WM831X_GPN_DIR ? "in" : "out", | |
| wm831x_gpio_get(chip, i) ? "high" : "low", | |
| pull, | |
| powerdomain, | |
| reg & WM831X_GPN_POL ? "" : " inverted", | |
| reg & WM831X_GPN_OD ? "open-drain" : "push-pull", | |
| tristated ? " tristated" : "", | |
| reg); | |
| } | |
| } | |
| #else | |
| #define wm831x_gpio_dbg_show NULL | |
| #endif | |
| static const struct gpio_chip template_chip = { | |
| .label = "wm831x", | |
| .owner = THIS_MODULE, | |
| .direction_input = wm831x_gpio_direction_in, | |
| .get = wm831x_gpio_get, | |
| .direction_output = wm831x_gpio_direction_out, | |
| .set = wm831x_gpio_set, | |
| .to_irq = wm831x_gpio_to_irq, | |
| .set_debounce = wm831x_gpio_set_debounce, | |
| .set_single_ended = wm831x_set_single_ended, | |
| .dbg_show = wm831x_gpio_dbg_show, | |
| .can_sleep = true, | |
| }; | |
| static int wm831x_gpio_probe(struct platform_device *pdev) | |
| { | |
| struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); | |
| struct wm831x_pdata *pdata = dev_get_platdata(wm831x->dev); | |
| struct wm831x_gpio *wm831x_gpio; | |
| int ret; | |
| wm831x_gpio = devm_kzalloc(&pdev->dev, sizeof(*wm831x_gpio), | |
| GFP_KERNEL); | |
| if (wm831x_gpio == NULL) | |
| return -ENOMEM; | |
| wm831x_gpio->wm831x = wm831x; | |
| wm831x_gpio->gpio_chip = template_chip; | |
| wm831x_gpio->gpio_chip.ngpio = wm831x->num_gpio; | |
| wm831x_gpio->gpio_chip.parent = &pdev->dev; | |
| if (pdata && pdata->gpio_base) | |
| wm831x_gpio->gpio_chip.base = pdata->gpio_base; | |
| else | |
| wm831x_gpio->gpio_chip.base = -1; | |
| ret = devm_gpiochip_add_data(&pdev->dev, &wm831x_gpio->gpio_chip, | |
| wm831x_gpio); | |
| if (ret < 0) { | |
| dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret); | |
| return ret; | |
| } | |
| platform_set_drvdata(pdev, wm831x_gpio); | |
| return ret; | |
| } | |
| static struct platform_driver wm831x_gpio_driver = { | |
| .driver.name = "wm831x-gpio", | |
| .probe = wm831x_gpio_probe, | |
| }; | |
| static int __init wm831x_gpio_init(void) | |
| { | |
| return platform_driver_register(&wm831x_gpio_driver); | |
| } | |
| subsys_initcall(wm831x_gpio_init); | |
| static void __exit wm831x_gpio_exit(void) | |
| { | |
| platform_driver_unregister(&wm831x_gpio_driver); | |
| } | |
| module_exit(wm831x_gpio_exit); | |
| MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); | |
| MODULE_DESCRIPTION("GPIO interface for WM831x PMICs"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_ALIAS("platform:wm831x-gpio"); |