| /* | |
| * gpiolib support for Wolfson WM8994 | |
| * | |
| * Copyright 2009 Wolfson Microelectronics PLC. | |
| * | |
| * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| * | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/slab.h> | |
| #include <linux/module.h> | |
| #include <linux/gpio.h> | |
| #include <linux/mfd/core.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/regmap.h> | |
| #include <linux/mfd/wm8994/core.h> | |
| #include <linux/mfd/wm8994/pdata.h> | |
| #include <linux/mfd/wm8994/gpio.h> | |
| #include <linux/mfd/wm8994/registers.h> | |
| struct wm8994_gpio { | |
| struct wm8994 *wm8994; | |
| struct gpio_chip gpio_chip; | |
| }; | |
| static int wm8994_gpio_request(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip); | |
| struct wm8994 *wm8994 = wm8994_gpio->wm8994; | |
| switch (wm8994->type) { | |
| case WM8958: | |
| switch (offset) { | |
| case 1: | |
| case 2: | |
| case 3: | |
| case 4: | |
| case 6: | |
| return -EINVAL; | |
| } | |
| break; | |
| default: | |
| break; | |
| } | |
| return 0; | |
| } | |
| static int wm8994_gpio_direction_in(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip); | |
| struct wm8994 *wm8994 = wm8994_gpio->wm8994; | |
| return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset, | |
| WM8994_GPN_DIR, WM8994_GPN_DIR); | |
| } | |
| static int wm8994_gpio_get(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip); | |
| struct wm8994 *wm8994 = wm8994_gpio->wm8994; | |
| int ret; | |
| ret = wm8994_reg_read(wm8994, WM8994_GPIO_1 + offset); | |
| if (ret < 0) | |
| return ret; | |
| if (ret & WM8994_GPN_LVL) | |
| return 1; | |
| else | |
| return 0; | |
| } | |
| static int wm8994_gpio_direction_out(struct gpio_chip *chip, | |
| unsigned offset, int value) | |
| { | |
| struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip); | |
| struct wm8994 *wm8994 = wm8994_gpio->wm8994; | |
| if (value) | |
| value = WM8994_GPN_LVL; | |
| return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset, | |
| WM8994_GPN_DIR | WM8994_GPN_LVL, value); | |
| } | |
| static void wm8994_gpio_set(struct gpio_chip *chip, unsigned offset, int value) | |
| { | |
| struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip); | |
| struct wm8994 *wm8994 = wm8994_gpio->wm8994; | |
| if (value) | |
| value = WM8994_GPN_LVL; | |
| wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset, WM8994_GPN_LVL, value); | |
| } | |
| static int wm8994_gpio_set_single_ended(struct gpio_chip *chip, | |
| unsigned int offset, | |
| enum single_ended_mode mode) | |
| { | |
| struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip); | |
| struct wm8994 *wm8994 = wm8994_gpio->wm8994; | |
| switch (mode) { | |
| case LINE_MODE_OPEN_DRAIN: | |
| return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset, | |
| WM8994_GPN_OP_CFG_MASK, | |
| WM8994_GPN_OP_CFG); | |
| case LINE_MODE_PUSH_PULL: | |
| return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset, | |
| WM8994_GPN_OP_CFG_MASK, 0); | |
| default: | |
| break; | |
| } | |
| return -ENOTSUPP; | |
| } | |
| static int wm8994_gpio_to_irq(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip); | |
| struct wm8994 *wm8994 = wm8994_gpio->wm8994; | |
| return regmap_irq_get_virq(wm8994->irq_data, offset); | |
| } | |
| #ifdef CONFIG_DEBUG_FS | |
| static const char *wm8994_gpio_fn(u16 fn) | |
| { | |
| switch (fn) { | |
| case WM8994_GP_FN_PIN_SPECIFIC: | |
| return "pin-specific"; | |
| case WM8994_GP_FN_GPIO: | |
| return "GPIO"; | |
| case WM8994_GP_FN_SDOUT: | |
| return "SDOUT"; | |
| case WM8994_GP_FN_IRQ: | |
| return "IRQ"; | |
| case WM8994_GP_FN_TEMPERATURE: | |
| return "Temperature"; | |
| case WM8994_GP_FN_MICBIAS1_DET: | |
| return "MICBIAS1 detect"; | |
| case WM8994_GP_FN_MICBIAS1_SHORT: | |
| return "MICBIAS1 short"; | |
| case WM8994_GP_FN_MICBIAS2_DET: | |
| return "MICBIAS2 detect"; | |
| case WM8994_GP_FN_MICBIAS2_SHORT: | |
| return "MICBIAS2 short"; | |
| case WM8994_GP_FN_FLL1_LOCK: | |
| return "FLL1 lock"; | |
| case WM8994_GP_FN_FLL2_LOCK: | |
| return "FLL2 lock"; | |
| case WM8994_GP_FN_SRC1_LOCK: | |
| return "SRC1 lock"; | |
| case WM8994_GP_FN_SRC2_LOCK: | |
| return "SRC2 lock"; | |
| case WM8994_GP_FN_DRC1_ACT: | |
| return "DRC1 activity"; | |
| case WM8994_GP_FN_DRC2_ACT: | |
| return "DRC2 activity"; | |
| case WM8994_GP_FN_DRC3_ACT: | |
| return "DRC3 activity"; | |
| case WM8994_GP_FN_WSEQ_STATUS: | |
| return "Write sequencer"; | |
| case WM8994_GP_FN_FIFO_ERROR: | |
| return "FIFO error"; | |
| case WM8994_GP_FN_OPCLK: | |
| return "OPCLK"; | |
| case WM8994_GP_FN_THW: | |
| return "Thermal warning"; | |
| case WM8994_GP_FN_DCS_DONE: | |
| return "DC servo"; | |
| case WM8994_GP_FN_FLL1_OUT: | |
| return "FLL1 output"; | |
| case WM8994_GP_FN_FLL2_OUT: | |
| return "FLL1 output"; | |
| default: | |
| return "Unknown"; | |
| } | |
| } | |
| static void wm8994_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) | |
| { | |
| struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip); | |
| struct wm8994 *wm8994 = wm8994_gpio->wm8994; | |
| int i; | |
| for (i = 0; i < chip->ngpio; i++) { | |
| int gpio = i + chip->base; | |
| int reg; | |
| const char *label; | |
| /* We report the GPIO even if it's not requested since | |
| * we're also reporting things like alternate | |
| * functions which apply even when the GPIO is not in | |
| * use as a GPIO. | |
| */ | |
| label = gpiochip_is_requested(chip, i); | |
| if (!label) | |
| label = "Unrequested"; | |
| seq_printf(s, " gpio-%-3d (%-20.20s) ", gpio, label); | |
| reg = wm8994_reg_read(wm8994, WM8994_GPIO_1 + i); | |
| if (reg < 0) { | |
| dev_err(wm8994->dev, | |
| "GPIO control %d read failed: %d\n", | |
| gpio, reg); | |
| seq_printf(s, "\n"); | |
| continue; | |
| } | |
| if (reg & WM8994_GPN_DIR) | |
| seq_printf(s, "in "); | |
| else | |
| seq_printf(s, "out "); | |
| if (reg & WM8994_GPN_PU) | |
| seq_printf(s, "pull up "); | |
| if (reg & WM8994_GPN_PD) | |
| seq_printf(s, "pull down "); | |
| if (reg & WM8994_GPN_POL) | |
| seq_printf(s, "inverted "); | |
| else | |
| seq_printf(s, "noninverted "); | |
| if (reg & WM8994_GPN_OP_CFG) | |
| seq_printf(s, "open drain "); | |
| else | |
| seq_printf(s, "push-pull "); | |
| seq_printf(s, "%s (%x)\n", | |
| wm8994_gpio_fn(reg & WM8994_GPN_FN_MASK), reg); | |
| } | |
| } | |
| #else | |
| #define wm8994_gpio_dbg_show NULL | |
| #endif | |
| static const struct gpio_chip template_chip = { | |
| .label = "wm8994", | |
| .owner = THIS_MODULE, | |
| .request = wm8994_gpio_request, | |
| .direction_input = wm8994_gpio_direction_in, | |
| .get = wm8994_gpio_get, | |
| .direction_output = wm8994_gpio_direction_out, | |
| .set = wm8994_gpio_set, | |
| .set_single_ended = wm8994_gpio_set_single_ended, | |
| .to_irq = wm8994_gpio_to_irq, | |
| .dbg_show = wm8994_gpio_dbg_show, | |
| .can_sleep = true, | |
| }; | |
| static int wm8994_gpio_probe(struct platform_device *pdev) | |
| { | |
| struct wm8994 *wm8994 = dev_get_drvdata(pdev->dev.parent); | |
| struct wm8994_pdata *pdata = dev_get_platdata(wm8994->dev); | |
| struct wm8994_gpio *wm8994_gpio; | |
| int ret; | |
| wm8994_gpio = devm_kzalloc(&pdev->dev, sizeof(*wm8994_gpio), | |
| GFP_KERNEL); | |
| if (wm8994_gpio == NULL) | |
| return -ENOMEM; | |
| wm8994_gpio->wm8994 = wm8994; | |
| wm8994_gpio->gpio_chip = template_chip; | |
| wm8994_gpio->gpio_chip.ngpio = WM8994_GPIO_MAX; | |
| wm8994_gpio->gpio_chip.parent = &pdev->dev; | |
| if (pdata && pdata->gpio_base) | |
| wm8994_gpio->gpio_chip.base = pdata->gpio_base; | |
| else | |
| wm8994_gpio->gpio_chip.base = -1; | |
| ret = devm_gpiochip_add_data(&pdev->dev, &wm8994_gpio->gpio_chip, | |
| wm8994_gpio); | |
| if (ret < 0) { | |
| dev_err(&pdev->dev, "Could not register gpiochip, %d\n", | |
| ret); | |
| return ret; | |
| } | |
| platform_set_drvdata(pdev, wm8994_gpio); | |
| return ret; | |
| } | |
| static struct platform_driver wm8994_gpio_driver = { | |
| .driver.name = "wm8994-gpio", | |
| .probe = wm8994_gpio_probe, | |
| }; | |
| static int __init wm8994_gpio_init(void) | |
| { | |
| return platform_driver_register(&wm8994_gpio_driver); | |
| } | |
| subsys_initcall(wm8994_gpio_init); | |
| static void __exit wm8994_gpio_exit(void) | |
| { | |
| platform_driver_unregister(&wm8994_gpio_driver); | |
| } | |
| module_exit(wm8994_gpio_exit); | |
| MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); | |
| MODULE_DESCRIPTION("GPIO interface for WM8994"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_ALIAS("platform:wm8994-gpio"); |