| /************************************************************************** | |
| * Copyright (c) 2011, Intel Corporation. | |
| * All Rights Reserved. | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms and conditions of the GNU General Public License, | |
| * version 2, as published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope it will be useful, but WITHOUT | |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
| * more details. | |
| * | |
| * You should have received a copy of the GNU General Public License along with | |
| * this program; if not, write to the Free Software Foundation, Inc., | |
| * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. | |
| * | |
| **************************************************************************/ | |
| #include <linux/backlight.h> | |
| #include <drm/drmP.h> | |
| #include <drm/drm.h> | |
| #include <drm/gma_drm.h> | |
| #include "psb_drv.h" | |
| #include "psb_reg.h" | |
| #include "psb_intel_reg.h" | |
| #include "intel_bios.h" | |
| #include "cdv_device.h" | |
| #include "gma_device.h" | |
| #define VGA_SR_INDEX 0x3c4 | |
| #define VGA_SR_DATA 0x3c5 | |
| static void cdv_disable_vga(struct drm_device *dev) | |
| { | |
| u8 sr1; | |
| u32 vga_reg; | |
| vga_reg = VGACNTRL; | |
| outb(1, VGA_SR_INDEX); | |
| sr1 = inb(VGA_SR_DATA); | |
| outb(sr1 | 1<<5, VGA_SR_DATA); | |
| udelay(300); | |
| REG_WRITE(vga_reg, VGA_DISP_DISABLE); | |
| REG_READ(vga_reg); | |
| } | |
| static int cdv_output_init(struct drm_device *dev) | |
| { | |
| struct drm_psb_private *dev_priv = dev->dev_private; | |
| drm_mode_create_scaling_mode_property(dev); | |
| cdv_disable_vga(dev); | |
| cdv_intel_crt_init(dev, &dev_priv->mode_dev); | |
| cdv_intel_lvds_init(dev, &dev_priv->mode_dev); | |
| /* These bits indicate HDMI not SDVO on CDV */ | |
| if (REG_READ(SDVOB) & SDVO_DETECTED) { | |
| cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOB); | |
| if (REG_READ(DP_B) & DP_DETECTED) | |
| cdv_intel_dp_init(dev, &dev_priv->mode_dev, DP_B); | |
| } | |
| if (REG_READ(SDVOC) & SDVO_DETECTED) { | |
| cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOC); | |
| if (REG_READ(DP_C) & DP_DETECTED) | |
| cdv_intel_dp_init(dev, &dev_priv->mode_dev, DP_C); | |
| } | |
| return 0; | |
| } | |
| #ifdef CONFIG_BACKLIGHT_CLASS_DEVICE | |
| /* | |
| * Cedartrail Backlght Interfaces | |
| */ | |
| static struct backlight_device *cdv_backlight_device; | |
| static int cdv_backlight_combination_mode(struct drm_device *dev) | |
| { | |
| return REG_READ(BLC_PWM_CTL2) & PWM_LEGACY_MODE; | |
| } | |
| static u32 cdv_get_max_backlight(struct drm_device *dev) | |
| { | |
| u32 max = REG_READ(BLC_PWM_CTL); | |
| if (max == 0) { | |
| DRM_DEBUG_KMS("LVDS Panel PWM value is 0!\n"); | |
| /* i915 does this, I believe which means that we should not | |
| * smash PWM control as firmware will take control of it. */ | |
| return 1; | |
| } | |
| max >>= 16; | |
| if (cdv_backlight_combination_mode(dev)) | |
| max *= 0xff; | |
| return max; | |
| } | |
| static int cdv_get_brightness(struct backlight_device *bd) | |
| { | |
| struct drm_device *dev = bl_get_data(bd); | |
| u32 val = REG_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK; | |
| if (cdv_backlight_combination_mode(dev)) { | |
| u8 lbpc; | |
| val &= ~1; | |
| pci_read_config_byte(dev->pdev, 0xF4, &lbpc); | |
| val *= lbpc; | |
| } | |
| return (val * 100)/cdv_get_max_backlight(dev); | |
| } | |
| static int cdv_set_brightness(struct backlight_device *bd) | |
| { | |
| struct drm_device *dev = bl_get_data(bd); | |
| int level = bd->props.brightness; | |
| u32 blc_pwm_ctl; | |
| /* Percentage 1-100% being valid */ | |
| if (level < 1) | |
| level = 1; | |
| level *= cdv_get_max_backlight(dev); | |
| level /= 100; | |
| if (cdv_backlight_combination_mode(dev)) { | |
| u32 max = cdv_get_max_backlight(dev); | |
| u8 lbpc; | |
| lbpc = level * 0xfe / max + 1; | |
| level /= lbpc; | |
| pci_write_config_byte(dev->pdev, 0xF4, lbpc); | |
| } | |
| blc_pwm_ctl = REG_READ(BLC_PWM_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK; | |
| REG_WRITE(BLC_PWM_CTL, (blc_pwm_ctl | | |
| (level << BACKLIGHT_DUTY_CYCLE_SHIFT))); | |
| return 0; | |
| } | |
| static const struct backlight_ops cdv_ops = { | |
| .get_brightness = cdv_get_brightness, | |
| .update_status = cdv_set_brightness, | |
| }; | |
| static int cdv_backlight_init(struct drm_device *dev) | |
| { | |
| struct drm_psb_private *dev_priv = dev->dev_private; | |
| struct backlight_properties props; | |
| memset(&props, 0, sizeof(struct backlight_properties)); | |
| props.max_brightness = 100; | |
| props.type = BACKLIGHT_PLATFORM; | |
| cdv_backlight_device = backlight_device_register("psb-bl", | |
| NULL, (void *)dev, &cdv_ops, &props); | |
| if (IS_ERR(cdv_backlight_device)) | |
| return PTR_ERR(cdv_backlight_device); | |
| cdv_backlight_device->props.brightness = | |
| cdv_get_brightness(cdv_backlight_device); | |
| backlight_update_status(cdv_backlight_device); | |
| dev_priv->backlight_device = cdv_backlight_device; | |
| dev_priv->backlight_enabled = true; | |
| return 0; | |
| } | |
| #endif | |
| /* | |
| * Provide the Cedarview specific chip logic and low level methods | |
| * for power management | |
| * | |
| * FIXME: we need to implement the apm/ospm base management bits | |
| * for this and the MID devices. | |
| */ | |
| static inline u32 CDV_MSG_READ32(uint port, uint offset) | |
| { | |
| int mcr = (0x10<<24) | (port << 16) | (offset << 8); | |
| uint32_t ret_val = 0; | |
| struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0); | |
| pci_write_config_dword(pci_root, 0xD0, mcr); | |
| pci_read_config_dword(pci_root, 0xD4, &ret_val); | |
| pci_dev_put(pci_root); | |
| return ret_val; | |
| } | |
| static inline void CDV_MSG_WRITE32(uint port, uint offset, u32 value) | |
| { | |
| int mcr = (0x11<<24) | (port << 16) | (offset << 8) | 0xF0; | |
| struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0); | |
| pci_write_config_dword(pci_root, 0xD4, value); | |
| pci_write_config_dword(pci_root, 0xD0, mcr); | |
| pci_dev_put(pci_root); | |
| } | |
| #define PSB_PM_SSC 0x20 | |
| #define PSB_PM_SSS 0x30 | |
| #define PSB_PWRGT_GFX_ON 0x02 | |
| #define PSB_PWRGT_GFX_OFF 0x01 | |
| #define PSB_PWRGT_GFX_D0 0x00 | |
| #define PSB_PWRGT_GFX_D3 0x03 | |
| static void cdv_init_pm(struct drm_device *dev) | |
| { | |
| struct drm_psb_private *dev_priv = dev->dev_private; | |
| u32 pwr_cnt; | |
| int i; | |
| dev_priv->apm_base = CDV_MSG_READ32(PSB_PUNIT_PORT, | |
| PSB_APMBA) & 0xFFFF; | |
| dev_priv->ospm_base = CDV_MSG_READ32(PSB_PUNIT_PORT, | |
| PSB_OSPMBA) & 0xFFFF; | |
| /* Power status */ | |
| pwr_cnt = inl(dev_priv->apm_base + PSB_APM_CMD); | |
| /* Enable the GPU */ | |
| pwr_cnt &= ~PSB_PWRGT_GFX_MASK; | |
| pwr_cnt |= PSB_PWRGT_GFX_ON; | |
| outl(pwr_cnt, dev_priv->apm_base + PSB_APM_CMD); | |
| /* Wait for the GPU power */ | |
| for (i = 0; i < 5; i++) { | |
| u32 pwr_sts = inl(dev_priv->apm_base + PSB_APM_STS); | |
| if ((pwr_sts & PSB_PWRGT_GFX_MASK) == 0) | |
| return; | |
| udelay(10); | |
| } | |
| dev_err(dev->dev, "GPU: power management timed out.\n"); | |
| } | |
| static void cdv_errata(struct drm_device *dev) | |
| { | |
| /* Disable bonus launch. | |
| * CPU and GPU competes for memory and display misses updates and | |
| * flickers. Worst with dual core, dual displays. | |
| * | |
| * Fixes were done to Win 7 gfx driver to disable a feature called | |
| * Bonus Launch to work around the issue, by degrading | |
| * performance. | |
| */ | |
| CDV_MSG_WRITE32(3, 0x30, 0x08027108); | |
| } | |
| /** | |
| * cdv_save_display_registers - save registers lost on suspend | |
| * @dev: our DRM device | |
| * | |
| * Save the state we need in order to be able to restore the interface | |
| * upon resume from suspend | |
| */ | |
| static int cdv_save_display_registers(struct drm_device *dev) | |
| { | |
| struct drm_psb_private *dev_priv = dev->dev_private; | |
| struct psb_save_area *regs = &dev_priv->regs; | |
| struct drm_connector *connector; | |
| dev_dbg(dev->dev, "Saving GPU registers.\n"); | |
| pci_read_config_byte(dev->pdev, 0xF4, ®s->cdv.saveLBB); | |
| regs->cdv.saveDSPCLK_GATE_D = REG_READ(DSPCLK_GATE_D); | |
| regs->cdv.saveRAMCLK_GATE_D = REG_READ(RAMCLK_GATE_D); | |
| regs->cdv.saveDSPARB = REG_READ(DSPARB); | |
| regs->cdv.saveDSPFW[0] = REG_READ(DSPFW1); | |
| regs->cdv.saveDSPFW[1] = REG_READ(DSPFW2); | |
| regs->cdv.saveDSPFW[2] = REG_READ(DSPFW3); | |
| regs->cdv.saveDSPFW[3] = REG_READ(DSPFW4); | |
| regs->cdv.saveDSPFW[4] = REG_READ(DSPFW5); | |
| regs->cdv.saveDSPFW[5] = REG_READ(DSPFW6); | |
| regs->cdv.saveADPA = REG_READ(ADPA); | |
| regs->cdv.savePP_CONTROL = REG_READ(PP_CONTROL); | |
| regs->cdv.savePFIT_PGM_RATIOS = REG_READ(PFIT_PGM_RATIOS); | |
| regs->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL); | |
| regs->saveBLC_PWM_CTL2 = REG_READ(BLC_PWM_CTL2); | |
| regs->cdv.saveLVDS = REG_READ(LVDS); | |
| regs->cdv.savePFIT_CONTROL = REG_READ(PFIT_CONTROL); | |
| regs->cdv.savePP_ON_DELAYS = REG_READ(PP_ON_DELAYS); | |
| regs->cdv.savePP_OFF_DELAYS = REG_READ(PP_OFF_DELAYS); | |
| regs->cdv.savePP_CYCLE = REG_READ(PP_CYCLE); | |
| regs->cdv.saveVGACNTRL = REG_READ(VGACNTRL); | |
| regs->cdv.saveIER = REG_READ(PSB_INT_ENABLE_R); | |
| regs->cdv.saveIMR = REG_READ(PSB_INT_MASK_R); | |
| list_for_each_entry(connector, &dev->mode_config.connector_list, head) | |
| connector->funcs->dpms(connector, DRM_MODE_DPMS_OFF); | |
| return 0; | |
| } | |
| /** | |
| * cdv_restore_display_registers - restore lost register state | |
| * @dev: our DRM device | |
| * | |
| * Restore register state that was lost during suspend and resume. | |
| * | |
| * FIXME: review | |
| */ | |
| static int cdv_restore_display_registers(struct drm_device *dev) | |
| { | |
| struct drm_psb_private *dev_priv = dev->dev_private; | |
| struct psb_save_area *regs = &dev_priv->regs; | |
| struct drm_connector *connector; | |
| u32 temp; | |
| pci_write_config_byte(dev->pdev, 0xF4, regs->cdv.saveLBB); | |
| REG_WRITE(DSPCLK_GATE_D, regs->cdv.saveDSPCLK_GATE_D); | |
| REG_WRITE(RAMCLK_GATE_D, regs->cdv.saveRAMCLK_GATE_D); | |
| /* BIOS does below anyway */ | |
| REG_WRITE(DPIO_CFG, 0); | |
| REG_WRITE(DPIO_CFG, DPIO_MODE_SELECT_0 | DPIO_CMN_RESET_N); | |
| temp = REG_READ(DPLL_A); | |
| if ((temp & DPLL_SYNCLOCK_ENABLE) == 0) { | |
| REG_WRITE(DPLL_A, temp | DPLL_SYNCLOCK_ENABLE); | |
| REG_READ(DPLL_A); | |
| } | |
| temp = REG_READ(DPLL_B); | |
| if ((temp & DPLL_SYNCLOCK_ENABLE) == 0) { | |
| REG_WRITE(DPLL_B, temp | DPLL_SYNCLOCK_ENABLE); | |
| REG_READ(DPLL_B); | |
| } | |
| udelay(500); | |
| REG_WRITE(DSPFW1, regs->cdv.saveDSPFW[0]); | |
| REG_WRITE(DSPFW2, regs->cdv.saveDSPFW[1]); | |
| REG_WRITE(DSPFW3, regs->cdv.saveDSPFW[2]); | |
| REG_WRITE(DSPFW4, regs->cdv.saveDSPFW[3]); | |
| REG_WRITE(DSPFW5, regs->cdv.saveDSPFW[4]); | |
| REG_WRITE(DSPFW6, regs->cdv.saveDSPFW[5]); | |
| REG_WRITE(DSPARB, regs->cdv.saveDSPARB); | |
| REG_WRITE(ADPA, regs->cdv.saveADPA); | |
| REG_WRITE(BLC_PWM_CTL2, regs->saveBLC_PWM_CTL2); | |
| REG_WRITE(LVDS, regs->cdv.saveLVDS); | |
| REG_WRITE(PFIT_CONTROL, regs->cdv.savePFIT_CONTROL); | |
| REG_WRITE(PFIT_PGM_RATIOS, regs->cdv.savePFIT_PGM_RATIOS); | |
| REG_WRITE(BLC_PWM_CTL, regs->saveBLC_PWM_CTL); | |
| REG_WRITE(PP_ON_DELAYS, regs->cdv.savePP_ON_DELAYS); | |
| REG_WRITE(PP_OFF_DELAYS, regs->cdv.savePP_OFF_DELAYS); | |
| REG_WRITE(PP_CYCLE, regs->cdv.savePP_CYCLE); | |
| REG_WRITE(PP_CONTROL, regs->cdv.savePP_CONTROL); | |
| REG_WRITE(VGACNTRL, regs->cdv.saveVGACNTRL); | |
| REG_WRITE(PSB_INT_ENABLE_R, regs->cdv.saveIER); | |
| REG_WRITE(PSB_INT_MASK_R, regs->cdv.saveIMR); | |
| /* Fix arbitration bug */ | |
| cdv_errata(dev); | |
| drm_mode_config_reset(dev); | |
| list_for_each_entry(connector, &dev->mode_config.connector_list, head) | |
| connector->funcs->dpms(connector, DRM_MODE_DPMS_ON); | |
| /* Resume the modeset for every activated CRTC */ | |
| drm_helper_resume_force_mode(dev); | |
| return 0; | |
| } | |
| static int cdv_power_down(struct drm_device *dev) | |
| { | |
| struct drm_psb_private *dev_priv = dev->dev_private; | |
| u32 pwr_cnt, pwr_mask, pwr_sts; | |
| int tries = 5; | |
| pwr_cnt = inl(dev_priv->apm_base + PSB_APM_CMD); | |
| pwr_cnt &= ~PSB_PWRGT_GFX_MASK; | |
| pwr_cnt |= PSB_PWRGT_GFX_OFF; | |
| pwr_mask = PSB_PWRGT_GFX_MASK; | |
| outl(pwr_cnt, dev_priv->apm_base + PSB_APM_CMD); | |
| while (tries--) { | |
| pwr_sts = inl(dev_priv->apm_base + PSB_APM_STS); | |
| if ((pwr_sts & pwr_mask) == PSB_PWRGT_GFX_D3) | |
| return 0; | |
| udelay(10); | |
| } | |
| return 0; | |
| } | |
| static int cdv_power_up(struct drm_device *dev) | |
| { | |
| struct drm_psb_private *dev_priv = dev->dev_private; | |
| u32 pwr_cnt, pwr_mask, pwr_sts; | |
| int tries = 5; | |
| pwr_cnt = inl(dev_priv->apm_base + PSB_APM_CMD); | |
| pwr_cnt &= ~PSB_PWRGT_GFX_MASK; | |
| pwr_cnt |= PSB_PWRGT_GFX_ON; | |
| pwr_mask = PSB_PWRGT_GFX_MASK; | |
| outl(pwr_cnt, dev_priv->apm_base + PSB_APM_CMD); | |
| while (tries--) { | |
| pwr_sts = inl(dev_priv->apm_base + PSB_APM_STS); | |
| if ((pwr_sts & pwr_mask) == PSB_PWRGT_GFX_D0) | |
| return 0; | |
| udelay(10); | |
| } | |
| return 0; | |
| } | |
| static void cdv_hotplug_work_func(struct work_struct *work) | |
| { | |
| struct drm_psb_private *dev_priv = container_of(work, struct drm_psb_private, | |
| hotplug_work); | |
| struct drm_device *dev = dev_priv->dev; | |
| /* Just fire off a uevent and let userspace tell us what to do */ | |
| drm_helper_hpd_irq_event(dev); | |
| } | |
| /* The core driver has received a hotplug IRQ. We are in IRQ context | |
| so extract the needed information and kick off queued processing */ | |
| static int cdv_hotplug_event(struct drm_device *dev) | |
| { | |
| struct drm_psb_private *dev_priv = dev->dev_private; | |
| schedule_work(&dev_priv->hotplug_work); | |
| REG_WRITE(PORT_HOTPLUG_STAT, REG_READ(PORT_HOTPLUG_STAT)); | |
| return 1; | |
| } | |
| static void cdv_hotplug_enable(struct drm_device *dev, bool on) | |
| { | |
| if (on) { | |
| u32 hotplug = REG_READ(PORT_HOTPLUG_EN); | |
| hotplug |= HDMIB_HOTPLUG_INT_EN | HDMIC_HOTPLUG_INT_EN | | |
| HDMID_HOTPLUG_INT_EN | CRT_HOTPLUG_INT_EN; | |
| REG_WRITE(PORT_HOTPLUG_EN, hotplug); | |
| } else { | |
| REG_WRITE(PORT_HOTPLUG_EN, 0); | |
| REG_WRITE(PORT_HOTPLUG_STAT, REG_READ(PORT_HOTPLUG_STAT)); | |
| } | |
| } | |
| static const char *force_audio_names[] = { | |
| "off", | |
| "auto", | |
| "on", | |
| }; | |
| void cdv_intel_attach_force_audio_property(struct drm_connector *connector) | |
| { | |
| struct drm_device *dev = connector->dev; | |
| struct drm_psb_private *dev_priv = dev->dev_private; | |
| struct drm_property *prop; | |
| int i; | |
| prop = dev_priv->force_audio_property; | |
| if (prop == NULL) { | |
| prop = drm_property_create(dev, DRM_MODE_PROP_ENUM, | |
| "audio", | |
| ARRAY_SIZE(force_audio_names)); | |
| if (prop == NULL) | |
| return; | |
| for (i = 0; i < ARRAY_SIZE(force_audio_names); i++) | |
| drm_property_add_enum(prop, i, i-1, force_audio_names[i]); | |
| dev_priv->force_audio_property = prop; | |
| } | |
| drm_object_attach_property(&connector->base, prop, 0); | |
| } | |
| static const char *broadcast_rgb_names[] = { | |
| "Full", | |
| "Limited 16:235", | |
| }; | |
| void cdv_intel_attach_broadcast_rgb_property(struct drm_connector *connector) | |
| { | |
| struct drm_device *dev = connector->dev; | |
| struct drm_psb_private *dev_priv = dev->dev_private; | |
| struct drm_property *prop; | |
| int i; | |
| prop = dev_priv->broadcast_rgb_property; | |
| if (prop == NULL) { | |
| prop = drm_property_create(dev, DRM_MODE_PROP_ENUM, | |
| "Broadcast RGB", | |
| ARRAY_SIZE(broadcast_rgb_names)); | |
| if (prop == NULL) | |
| return; | |
| for (i = 0; i < ARRAY_SIZE(broadcast_rgb_names); i++) | |
| drm_property_add_enum(prop, i, i, broadcast_rgb_names[i]); | |
| dev_priv->broadcast_rgb_property = prop; | |
| } | |
| drm_object_attach_property(&connector->base, prop, 0); | |
| } | |
| /* Cedarview */ | |
| static const struct psb_offset cdv_regmap[2] = { | |
| { | |
| .fp0 = FPA0, | |
| .fp1 = FPA1, | |
| .cntr = DSPACNTR, | |
| .conf = PIPEACONF, | |
| .src = PIPEASRC, | |
| .dpll = DPLL_A, | |
| .dpll_md = DPLL_A_MD, | |
| .htotal = HTOTAL_A, | |
| .hblank = HBLANK_A, | |
| .hsync = HSYNC_A, | |
| .vtotal = VTOTAL_A, | |
| .vblank = VBLANK_A, | |
| .vsync = VSYNC_A, | |
| .stride = DSPASTRIDE, | |
| .size = DSPASIZE, | |
| .pos = DSPAPOS, | |
| .base = DSPABASE, | |
| .surf = DSPASURF, | |
| .addr = DSPABASE, | |
| .status = PIPEASTAT, | |
| .linoff = DSPALINOFF, | |
| .tileoff = DSPATILEOFF, | |
| .palette = PALETTE_A, | |
| }, | |
| { | |
| .fp0 = FPB0, | |
| .fp1 = FPB1, | |
| .cntr = DSPBCNTR, | |
| .conf = PIPEBCONF, | |
| .src = PIPEBSRC, | |
| .dpll = DPLL_B, | |
| .dpll_md = DPLL_B_MD, | |
| .htotal = HTOTAL_B, | |
| .hblank = HBLANK_B, | |
| .hsync = HSYNC_B, | |
| .vtotal = VTOTAL_B, | |
| .vblank = VBLANK_B, | |
| .vsync = VSYNC_B, | |
| .stride = DSPBSTRIDE, | |
| .size = DSPBSIZE, | |
| .pos = DSPBPOS, | |
| .base = DSPBBASE, | |
| .surf = DSPBSURF, | |
| .addr = DSPBBASE, | |
| .status = PIPEBSTAT, | |
| .linoff = DSPBLINOFF, | |
| .tileoff = DSPBTILEOFF, | |
| .palette = PALETTE_B, | |
| } | |
| }; | |
| static int cdv_chip_setup(struct drm_device *dev) | |
| { | |
| struct drm_psb_private *dev_priv = dev->dev_private; | |
| INIT_WORK(&dev_priv->hotplug_work, cdv_hotplug_work_func); | |
| if (pci_enable_msi(dev->pdev)) | |
| dev_warn(dev->dev, "Enabling MSI failed!\n"); | |
| dev_priv->regmap = cdv_regmap; | |
| gma_get_core_freq(dev); | |
| psb_intel_opregion_init(dev); | |
| psb_intel_init_bios(dev); | |
| cdv_hotplug_enable(dev, false); | |
| return 0; | |
| } | |
| /* CDV is much like Poulsbo but has MID like SGX offsets and PM */ | |
| const struct psb_ops cdv_chip_ops = { | |
| .name = "GMA3600/3650", | |
| .accel_2d = 0, | |
| .pipes = 2, | |
| .crtcs = 2, | |
| .hdmi_mask = (1 << 0) | (1 << 1), | |
| .lvds_mask = (1 << 1), | |
| .sdvo_mask = (1 << 0), | |
| .cursor_needs_phys = 0, | |
| .sgx_offset = MRST_SGX_OFFSET, | |
| .chip_setup = cdv_chip_setup, | |
| .errata = cdv_errata, | |
| .crtc_helper = &cdv_intel_helper_funcs, | |
| .crtc_funcs = &cdv_intel_crtc_funcs, | |
| .clock_funcs = &cdv_clock_funcs, | |
| .output_init = cdv_output_init, | |
| .hotplug = cdv_hotplug_event, | |
| .hotplug_enable = cdv_hotplug_enable, | |
| #ifdef CONFIG_BACKLIGHT_CLASS_DEVICE | |
| .backlight_init = cdv_backlight_init, | |
| #endif | |
| .init_pm = cdv_init_pm, | |
| .save_regs = cdv_save_display_registers, | |
| .restore_regs = cdv_restore_display_registers, | |
| .save_crtc = gma_crtc_save, | |
| .restore_crtc = gma_crtc_restore, | |
| .power_down = cdv_power_down, | |
| .power_up = cdv_power_up, | |
| .update_wm = cdv_update_wm, | |
| .disable_sr = cdv_disable_sr, | |
| }; |