| /* | |
| * drivers/gpu/drm/omapdrm/omap_drv.c | |
| * | |
| * Copyright (C) 2011 Texas Instruments | |
| * Author: Rob Clark <rob@ti.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License version 2 as published by | |
| * the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, but WITHOUT | |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
| * more details. | |
| * | |
| * You should have received a copy of the GNU General Public License along with | |
| * this program. If not, see <http://www.gnu.org/licenses/>. | |
| */ | |
| #include <linux/wait.h> | |
| #include <drm/drm_atomic.h> | |
| #include <drm/drm_atomic_helper.h> | |
| #include <drm/drm_crtc_helper.h> | |
| #include <drm/drm_fb_helper.h> | |
| #include "omap_dmm_tiler.h" | |
| #include "omap_drv.h" | |
| #define DRIVER_NAME MODULE_NAME | |
| #define DRIVER_DESC "OMAP DRM" | |
| #define DRIVER_DATE "20110917" | |
| #define DRIVER_MAJOR 1 | |
| #define DRIVER_MINOR 0 | |
| #define DRIVER_PATCHLEVEL 0 | |
| static int num_crtc = CONFIG_DRM_OMAP_NUM_CRTCS; | |
| MODULE_PARM_DESC(num_crtc, "Number of overlays to use as CRTCs"); | |
| module_param(num_crtc, int, 0600); | |
| /* | |
| * mode config funcs | |
| */ | |
| /* Notes about mapping DSS and DRM entities: | |
| * CRTC: overlay | |
| * encoder: manager.. with some extension to allow one primary CRTC | |
| * and zero or more video CRTC's to be mapped to one encoder? | |
| * connector: dssdev.. manager can be attached/detached from different | |
| * devices | |
| */ | |
| static void omap_fb_output_poll_changed(struct drm_device *dev) | |
| { | |
| struct omap_drm_private *priv = dev->dev_private; | |
| DBG("dev=%p", dev); | |
| if (priv->fbdev) | |
| drm_fb_helper_hotplug_event(priv->fbdev); | |
| } | |
| struct omap_atomic_state_commit { | |
| struct work_struct work; | |
| struct drm_device *dev; | |
| struct drm_atomic_state *state; | |
| u32 crtcs; | |
| }; | |
| static void omap_atomic_wait_for_completion(struct drm_device *dev, | |
| struct drm_atomic_state *old_state) | |
| { | |
| struct drm_crtc_state *old_crtc_state; | |
| struct drm_crtc *crtc; | |
| unsigned int i; | |
| int ret; | |
| for_each_crtc_in_state(old_state, crtc, old_crtc_state, i) { | |
| if (!crtc->state->enable) | |
| continue; | |
| ret = omap_crtc_wait_pending(crtc); | |
| if (!ret) | |
| dev_warn(dev->dev, | |
| "atomic complete timeout (pipe %u)!\n", i); | |
| } | |
| } | |
| static void omap_atomic_complete(struct omap_atomic_state_commit *commit) | |
| { | |
| struct drm_device *dev = commit->dev; | |
| struct omap_drm_private *priv = dev->dev_private; | |
| struct drm_atomic_state *old_state = commit->state; | |
| /* Apply the atomic update. */ | |
| dispc_runtime_get(); | |
| drm_atomic_helper_commit_modeset_disables(dev, old_state); | |
| drm_atomic_helper_commit_planes(dev, old_state, 0); | |
| drm_atomic_helper_commit_modeset_enables(dev, old_state); | |
| omap_atomic_wait_for_completion(dev, old_state); | |
| drm_atomic_helper_cleanup_planes(dev, old_state); | |
| dispc_runtime_put(); | |
| drm_atomic_state_free(old_state); | |
| /* Complete the commit, wake up any waiter. */ | |
| spin_lock(&priv->commit.lock); | |
| priv->commit.pending &= ~commit->crtcs; | |
| spin_unlock(&priv->commit.lock); | |
| wake_up_all(&priv->commit.wait); | |
| kfree(commit); | |
| } | |
| static void omap_atomic_work(struct work_struct *work) | |
| { | |
| struct omap_atomic_state_commit *commit = | |
| container_of(work, struct omap_atomic_state_commit, work); | |
| omap_atomic_complete(commit); | |
| } | |
| static bool omap_atomic_is_pending(struct omap_drm_private *priv, | |
| struct omap_atomic_state_commit *commit) | |
| { | |
| bool pending; | |
| spin_lock(&priv->commit.lock); | |
| pending = priv->commit.pending & commit->crtcs; | |
| spin_unlock(&priv->commit.lock); | |
| return pending; | |
| } | |
| static int omap_atomic_commit(struct drm_device *dev, | |
| struct drm_atomic_state *state, bool nonblock) | |
| { | |
| struct omap_drm_private *priv = dev->dev_private; | |
| struct omap_atomic_state_commit *commit; | |
| struct drm_crtc *crtc; | |
| struct drm_crtc_state *crtc_state; | |
| int i, ret; | |
| ret = drm_atomic_helper_prepare_planes(dev, state); | |
| if (ret) | |
| return ret; | |
| /* Allocate the commit object. */ | |
| commit = kzalloc(sizeof(*commit), GFP_KERNEL); | |
| if (commit == NULL) { | |
| ret = -ENOMEM; | |
| goto error; | |
| } | |
| INIT_WORK(&commit->work, omap_atomic_work); | |
| commit->dev = dev; | |
| commit->state = state; | |
| /* Wait until all affected CRTCs have completed previous commits and | |
| * mark them as pending. | |
| */ | |
| for_each_crtc_in_state(state, crtc, crtc_state, i) | |
| commit->crtcs |= drm_crtc_mask(crtc); | |
| wait_event(priv->commit.wait, !omap_atomic_is_pending(priv, commit)); | |
| spin_lock(&priv->commit.lock); | |
| priv->commit.pending |= commit->crtcs; | |
| spin_unlock(&priv->commit.lock); | |
| /* Swap the state, this is the point of no return. */ | |
| drm_atomic_helper_swap_state(state, true); | |
| if (nonblock) | |
| schedule_work(&commit->work); | |
| else | |
| omap_atomic_complete(commit); | |
| return 0; | |
| error: | |
| drm_atomic_helper_cleanup_planes(dev, state); | |
| return ret; | |
| } | |
| static const struct drm_mode_config_funcs omap_mode_config_funcs = { | |
| .fb_create = omap_framebuffer_create, | |
| .output_poll_changed = omap_fb_output_poll_changed, | |
| .atomic_check = drm_atomic_helper_check, | |
| .atomic_commit = omap_atomic_commit, | |
| }; | |
| static int get_connector_type(struct omap_dss_device *dssdev) | |
| { | |
| switch (dssdev->type) { | |
| case OMAP_DISPLAY_TYPE_HDMI: | |
| return DRM_MODE_CONNECTOR_HDMIA; | |
| case OMAP_DISPLAY_TYPE_DVI: | |
| return DRM_MODE_CONNECTOR_DVID; | |
| case OMAP_DISPLAY_TYPE_DSI: | |
| return DRM_MODE_CONNECTOR_DSI; | |
| default: | |
| return DRM_MODE_CONNECTOR_Unknown; | |
| } | |
| } | |
| static bool channel_used(struct drm_device *dev, enum omap_channel channel) | |
| { | |
| struct omap_drm_private *priv = dev->dev_private; | |
| int i; | |
| for (i = 0; i < priv->num_crtcs; i++) { | |
| struct drm_crtc *crtc = priv->crtcs[i]; | |
| if (omap_crtc_channel(crtc) == channel) | |
| return true; | |
| } | |
| return false; | |
| } | |
| static void omap_disconnect_dssdevs(void) | |
| { | |
| struct omap_dss_device *dssdev = NULL; | |
| for_each_dss_dev(dssdev) | |
| dssdev->driver->disconnect(dssdev); | |
| } | |
| static int omap_connect_dssdevs(void) | |
| { | |
| int r; | |
| struct omap_dss_device *dssdev = NULL; | |
| bool no_displays = true; | |
| for_each_dss_dev(dssdev) { | |
| r = dssdev->driver->connect(dssdev); | |
| if (r == -EPROBE_DEFER) { | |
| omap_dss_put_device(dssdev); | |
| goto cleanup; | |
| } else if (r) { | |
| dev_warn(dssdev->dev, "could not connect display: %s\n", | |
| dssdev->name); | |
| } else { | |
| no_displays = false; | |
| } | |
| } | |
| if (no_displays) | |
| return -EPROBE_DEFER; | |
| return 0; | |
| cleanup: | |
| /* | |
| * if we are deferring probe, we disconnect the devices we previously | |
| * connected | |
| */ | |
| omap_disconnect_dssdevs(); | |
| return r; | |
| } | |
| static int omap_modeset_create_crtc(struct drm_device *dev, int id, | |
| enum omap_channel channel) | |
| { | |
| struct omap_drm_private *priv = dev->dev_private; | |
| struct drm_plane *plane; | |
| struct drm_crtc *crtc; | |
| plane = omap_plane_init(dev, id, DRM_PLANE_TYPE_PRIMARY); | |
| if (IS_ERR(plane)) | |
| return PTR_ERR(plane); | |
| crtc = omap_crtc_init(dev, plane, channel, id); | |
| BUG_ON(priv->num_crtcs >= ARRAY_SIZE(priv->crtcs)); | |
| priv->crtcs[id] = crtc; | |
| priv->num_crtcs++; | |
| priv->planes[id] = plane; | |
| priv->num_planes++; | |
| return 0; | |
| } | |
| static int omap_modeset_init_properties(struct drm_device *dev) | |
| { | |
| struct omap_drm_private *priv = dev->dev_private; | |
| if (priv->has_dmm) { | |
| dev->mode_config.rotation_property = | |
| drm_mode_create_rotation_property(dev, | |
| DRM_ROTATE_0 | DRM_ROTATE_90 | | |
| DRM_ROTATE_180 | DRM_ROTATE_270 | | |
| DRM_REFLECT_X | DRM_REFLECT_Y); | |
| if (!dev->mode_config.rotation_property) | |
| return -ENOMEM; | |
| } | |
| priv->zorder_prop = drm_property_create_range(dev, 0, "zorder", 0, 3); | |
| if (!priv->zorder_prop) | |
| return -ENOMEM; | |
| return 0; | |
| } | |
| static int omap_modeset_init(struct drm_device *dev) | |
| { | |
| struct omap_drm_private *priv = dev->dev_private; | |
| struct omap_dss_device *dssdev = NULL; | |
| int num_ovls = dss_feat_get_num_ovls(); | |
| int num_mgrs = dss_feat_get_num_mgrs(); | |
| int num_crtcs; | |
| int i, id = 0; | |
| int ret; | |
| drm_mode_config_init(dev); | |
| omap_drm_irq_install(dev); | |
| ret = omap_modeset_init_properties(dev); | |
| if (ret < 0) | |
| return ret; | |
| /* | |
| * We usually don't want to create a CRTC for each manager, at least | |
| * not until we have a way to expose private planes to userspace. | |
| * Otherwise there would not be enough video pipes left for drm planes. | |
| * We use the num_crtc argument to limit the number of crtcs we create. | |
| */ | |
| num_crtcs = min3(num_crtc, num_mgrs, num_ovls); | |
| dssdev = NULL; | |
| for_each_dss_dev(dssdev) { | |
| struct drm_connector *connector; | |
| struct drm_encoder *encoder; | |
| enum omap_channel channel; | |
| struct omap_dss_device *out; | |
| if (!omapdss_device_is_connected(dssdev)) | |
| continue; | |
| encoder = omap_encoder_init(dev, dssdev); | |
| if (!encoder) { | |
| dev_err(dev->dev, "could not create encoder: %s\n", | |
| dssdev->name); | |
| return -ENOMEM; | |
| } | |
| connector = omap_connector_init(dev, | |
| get_connector_type(dssdev), dssdev, encoder); | |
| if (!connector) { | |
| dev_err(dev->dev, "could not create connector: %s\n", | |
| dssdev->name); | |
| return -ENOMEM; | |
| } | |
| BUG_ON(priv->num_encoders >= ARRAY_SIZE(priv->encoders)); | |
| BUG_ON(priv->num_connectors >= ARRAY_SIZE(priv->connectors)); | |
| priv->encoders[priv->num_encoders++] = encoder; | |
| priv->connectors[priv->num_connectors++] = connector; | |
| drm_mode_connector_attach_encoder(connector, encoder); | |
| /* | |
| * if we have reached the limit of the crtcs we are allowed to | |
| * create, let's not try to look for a crtc for this | |
| * panel/encoder and onwards, we will, of course, populate the | |
| * the possible_crtcs field for all the encoders with the final | |
| * set of crtcs we create | |
| */ | |
| if (id == num_crtcs) | |
| continue; | |
| /* | |
| * get the recommended DISPC channel for this encoder. For now, | |
| * we only try to get create a crtc out of the recommended, the | |
| * other possible channels to which the encoder can connect are | |
| * not considered. | |
| */ | |
| out = omapdss_find_output_from_display(dssdev); | |
| channel = out->dispc_channel; | |
| omap_dss_put_device(out); | |
| /* | |
| * if this channel hasn't already been taken by a previously | |
| * allocated crtc, we create a new crtc for it | |
| */ | |
| if (!channel_used(dev, channel)) { | |
| ret = omap_modeset_create_crtc(dev, id, channel); | |
| if (ret < 0) { | |
| dev_err(dev->dev, | |
| "could not create CRTC (channel %u)\n", | |
| channel); | |
| return ret; | |
| } | |
| id++; | |
| } | |
| } | |
| /* | |
| * we have allocated crtcs according to the need of the panels/encoders, | |
| * adding more crtcs here if needed | |
| */ | |
| for (; id < num_crtcs; id++) { | |
| /* find a free manager for this crtc */ | |
| for (i = 0; i < num_mgrs; i++) { | |
| if (!channel_used(dev, i)) | |
| break; | |
| } | |
| if (i == num_mgrs) { | |
| /* this shouldn't really happen */ | |
| dev_err(dev->dev, "no managers left for crtc\n"); | |
| return -ENOMEM; | |
| } | |
| ret = omap_modeset_create_crtc(dev, id, i); | |
| if (ret < 0) { | |
| dev_err(dev->dev, | |
| "could not create CRTC (channel %u)\n", i); | |
| return ret; | |
| } | |
| } | |
| /* | |
| * Create normal planes for the remaining overlays: | |
| */ | |
| for (; id < num_ovls; id++) { | |
| struct drm_plane *plane; | |
| plane = omap_plane_init(dev, id, DRM_PLANE_TYPE_OVERLAY); | |
| if (IS_ERR(plane)) | |
| return PTR_ERR(plane); | |
| BUG_ON(priv->num_planes >= ARRAY_SIZE(priv->planes)); | |
| priv->planes[priv->num_planes++] = plane; | |
| } | |
| for (i = 0; i < priv->num_encoders; i++) { | |
| struct drm_encoder *encoder = priv->encoders[i]; | |
| struct omap_dss_device *dssdev = | |
| omap_encoder_get_dssdev(encoder); | |
| struct omap_dss_device *output; | |
| output = omapdss_find_output_from_display(dssdev); | |
| /* figure out which crtc's we can connect the encoder to: */ | |
| encoder->possible_crtcs = 0; | |
| for (id = 0; id < priv->num_crtcs; id++) { | |
| struct drm_crtc *crtc = priv->crtcs[id]; | |
| enum omap_channel crtc_channel; | |
| crtc_channel = omap_crtc_channel(crtc); | |
| if (output->dispc_channel == crtc_channel) { | |
| encoder->possible_crtcs |= (1 << id); | |
| break; | |
| } | |
| } | |
| omap_dss_put_device(output); | |
| } | |
| DBG("registered %d planes, %d crtcs, %d encoders and %d connectors\n", | |
| priv->num_planes, priv->num_crtcs, priv->num_encoders, | |
| priv->num_connectors); | |
| dev->mode_config.min_width = 32; | |
| dev->mode_config.min_height = 32; | |
| /* note: eventually will need some cpu_is_omapXYZ() type stuff here | |
| * to fill in these limits properly on different OMAP generations.. | |
| */ | |
| dev->mode_config.max_width = 2048; | |
| dev->mode_config.max_height = 2048; | |
| dev->mode_config.funcs = &omap_mode_config_funcs; | |
| drm_mode_config_reset(dev); | |
| return 0; | |
| } | |
| static void omap_modeset_free(struct drm_device *dev) | |
| { | |
| drm_mode_config_cleanup(dev); | |
| } | |
| /* | |
| * drm ioctl funcs | |
| */ | |
| static int ioctl_get_param(struct drm_device *dev, void *data, | |
| struct drm_file *file_priv) | |
| { | |
| struct omap_drm_private *priv = dev->dev_private; | |
| struct drm_omap_param *args = data; | |
| DBG("%p: param=%llu", dev, args->param); | |
| switch (args->param) { | |
| case OMAP_PARAM_CHIPSET_ID: | |
| args->value = priv->omaprev; | |
| break; | |
| default: | |
| DBG("unknown parameter %lld", args->param); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int ioctl_set_param(struct drm_device *dev, void *data, | |
| struct drm_file *file_priv) | |
| { | |
| struct drm_omap_param *args = data; | |
| switch (args->param) { | |
| default: | |
| DBG("unknown parameter %lld", args->param); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| #define OMAP_BO_USER_MASK 0x00ffffff /* flags settable by userspace */ | |
| static int ioctl_gem_new(struct drm_device *dev, void *data, | |
| struct drm_file *file_priv) | |
| { | |
| struct drm_omap_gem_new *args = data; | |
| u32 flags = args->flags & OMAP_BO_USER_MASK; | |
| VERB("%p:%p: size=0x%08x, flags=%08x", dev, file_priv, | |
| args->size.bytes, flags); | |
| return omap_gem_new_handle(dev, file_priv, args->size, flags, | |
| &args->handle); | |
| } | |
| static int ioctl_gem_cpu_prep(struct drm_device *dev, void *data, | |
| struct drm_file *file_priv) | |
| { | |
| struct drm_omap_gem_cpu_prep *args = data; | |
| struct drm_gem_object *obj; | |
| int ret; | |
| VERB("%p:%p: handle=%d, op=%x", dev, file_priv, args->handle, args->op); | |
| obj = drm_gem_object_lookup(file_priv, args->handle); | |
| if (!obj) | |
| return -ENOENT; | |
| ret = omap_gem_op_sync(obj, args->op); | |
| if (!ret) | |
| ret = omap_gem_op_start(obj, args->op); | |
| drm_gem_object_unreference_unlocked(obj); | |
| return ret; | |
| } | |
| static int ioctl_gem_cpu_fini(struct drm_device *dev, void *data, | |
| struct drm_file *file_priv) | |
| { | |
| struct drm_omap_gem_cpu_fini *args = data; | |
| struct drm_gem_object *obj; | |
| int ret; | |
| VERB("%p:%p: handle=%d", dev, file_priv, args->handle); | |
| obj = drm_gem_object_lookup(file_priv, args->handle); | |
| if (!obj) | |
| return -ENOENT; | |
| /* XXX flushy, flushy */ | |
| ret = 0; | |
| if (!ret) | |
| ret = omap_gem_op_finish(obj, args->op); | |
| drm_gem_object_unreference_unlocked(obj); | |
| return ret; | |
| } | |
| static int ioctl_gem_info(struct drm_device *dev, void *data, | |
| struct drm_file *file_priv) | |
| { | |
| struct drm_omap_gem_info *args = data; | |
| struct drm_gem_object *obj; | |
| int ret = 0; | |
| VERB("%p:%p: handle=%d", dev, file_priv, args->handle); | |
| obj = drm_gem_object_lookup(file_priv, args->handle); | |
| if (!obj) | |
| return -ENOENT; | |
| args->size = omap_gem_mmap_size(obj); | |
| args->offset = omap_gem_mmap_offset(obj); | |
| drm_gem_object_unreference_unlocked(obj); | |
| return ret; | |
| } | |
| static const struct drm_ioctl_desc ioctls[DRM_COMMAND_END - DRM_COMMAND_BASE] = { | |
| DRM_IOCTL_DEF_DRV(OMAP_GET_PARAM, ioctl_get_param, DRM_AUTH), | |
| DRM_IOCTL_DEF_DRV(OMAP_SET_PARAM, ioctl_set_param, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), | |
| DRM_IOCTL_DEF_DRV(OMAP_GEM_NEW, ioctl_gem_new, DRM_AUTH), | |
| DRM_IOCTL_DEF_DRV(OMAP_GEM_CPU_PREP, ioctl_gem_cpu_prep, DRM_AUTH), | |
| DRM_IOCTL_DEF_DRV(OMAP_GEM_CPU_FINI, ioctl_gem_cpu_fini, DRM_AUTH), | |
| DRM_IOCTL_DEF_DRV(OMAP_GEM_INFO, ioctl_gem_info, DRM_AUTH), | |
| }; | |
| /* | |
| * drm driver funcs | |
| */ | |
| /** | |
| * load - setup chip and create an initial config | |
| * @dev: DRM device | |
| * @flags: startup flags | |
| * | |
| * The driver load routine has to do several things: | |
| * - initialize the memory manager | |
| * - allocate initial config memory | |
| * - setup the DRM framebuffer with the allocated memory | |
| */ | |
| static int dev_load(struct drm_device *dev, unsigned long flags) | |
| { | |
| struct omap_drm_platform_data *pdata = dev->dev->platform_data; | |
| struct omap_drm_private *priv; | |
| unsigned int i; | |
| int ret; | |
| DBG("load: dev=%p", dev); | |
| priv = kzalloc(sizeof(*priv), GFP_KERNEL); | |
| if (!priv) | |
| return -ENOMEM; | |
| priv->omaprev = pdata->omaprev; | |
| dev->dev_private = priv; | |
| priv->wq = alloc_ordered_workqueue("omapdrm", 0); | |
| init_waitqueue_head(&priv->commit.wait); | |
| spin_lock_init(&priv->commit.lock); | |
| spin_lock_init(&priv->list_lock); | |
| INIT_LIST_HEAD(&priv->obj_list); | |
| omap_gem_init(dev); | |
| ret = omap_modeset_init(dev); | |
| if (ret) { | |
| dev_err(dev->dev, "omap_modeset_init failed: ret=%d\n", ret); | |
| dev->dev_private = NULL; | |
| kfree(priv); | |
| return ret; | |
| } | |
| /* Initialize vblank handling, start with all CRTCs disabled. */ | |
| ret = drm_vblank_init(dev, priv->num_crtcs); | |
| if (ret) | |
| dev_warn(dev->dev, "could not init vblank\n"); | |
| for (i = 0; i < priv->num_crtcs; i++) | |
| drm_crtc_vblank_off(priv->crtcs[i]); | |
| priv->fbdev = omap_fbdev_init(dev); | |
| /* store off drm_device for use in pm ops */ | |
| dev_set_drvdata(dev->dev, dev); | |
| drm_kms_helper_poll_init(dev); | |
| return 0; | |
| } | |
| static int dev_unload(struct drm_device *dev) | |
| { | |
| struct omap_drm_private *priv = dev->dev_private; | |
| DBG("unload: dev=%p", dev); | |
| drm_kms_helper_poll_fini(dev); | |
| if (priv->fbdev) | |
| omap_fbdev_free(dev); | |
| omap_modeset_free(dev); | |
| omap_gem_deinit(dev); | |
| destroy_workqueue(priv->wq); | |
| drm_vblank_cleanup(dev); | |
| omap_drm_irq_uninstall(dev); | |
| kfree(dev->dev_private); | |
| dev->dev_private = NULL; | |
| dev_set_drvdata(dev->dev, NULL); | |
| return 0; | |
| } | |
| static int dev_open(struct drm_device *dev, struct drm_file *file) | |
| { | |
| file->driver_priv = NULL; | |
| DBG("open: dev=%p, file=%p", dev, file); | |
| return 0; | |
| } | |
| /** | |
| * lastclose - clean up after all DRM clients have exited | |
| * @dev: DRM device | |
| * | |
| * Take care of cleaning up after all DRM clients have exited. In the | |
| * mode setting case, we want to restore the kernel's initial mode (just | |
| * in case the last client left us in a bad state). | |
| */ | |
| static void dev_lastclose(struct drm_device *dev) | |
| { | |
| int i; | |
| /* we don't support vga_switcheroo.. so just make sure the fbdev | |
| * mode is active | |
| */ | |
| struct omap_drm_private *priv = dev->dev_private; | |
| int ret; | |
| DBG("lastclose: dev=%p", dev); | |
| if (dev->mode_config.rotation_property) { | |
| /* need to restore default rotation state.. not sure | |
| * if there is a cleaner way to restore properties to | |
| * default state? Maybe a flag that properties should | |
| * automatically be restored to default state on | |
| * lastclose? | |
| */ | |
| for (i = 0; i < priv->num_crtcs; i++) { | |
| drm_object_property_set_value(&priv->crtcs[i]->base, | |
| dev->mode_config.rotation_property, 0); | |
| } | |
| for (i = 0; i < priv->num_planes; i++) { | |
| drm_object_property_set_value(&priv->planes[i]->base, | |
| dev->mode_config.rotation_property, 0); | |
| } | |
| } | |
| if (priv->fbdev) { | |
| ret = drm_fb_helper_restore_fbdev_mode_unlocked(priv->fbdev); | |
| if (ret) | |
| DBG("failed to restore crtc mode"); | |
| } | |
| } | |
| static const struct vm_operations_struct omap_gem_vm_ops = { | |
| .fault = omap_gem_fault, | |
| .open = drm_gem_vm_open, | |
| .close = drm_gem_vm_close, | |
| }; | |
| static const struct file_operations omapdriver_fops = { | |
| .owner = THIS_MODULE, | |
| .open = drm_open, | |
| .unlocked_ioctl = drm_ioctl, | |
| .release = drm_release, | |
| .mmap = omap_gem_mmap, | |
| .poll = drm_poll, | |
| .read = drm_read, | |
| .llseek = noop_llseek, | |
| }; | |
| static struct drm_driver omap_drm_driver = { | |
| .driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME | | |
| DRIVER_ATOMIC, | |
| .load = dev_load, | |
| .unload = dev_unload, | |
| .open = dev_open, | |
| .lastclose = dev_lastclose, | |
| .get_vblank_counter = drm_vblank_no_hw_counter, | |
| .enable_vblank = omap_irq_enable_vblank, | |
| .disable_vblank = omap_irq_disable_vblank, | |
| #ifdef CONFIG_DEBUG_FS | |
| .debugfs_init = omap_debugfs_init, | |
| .debugfs_cleanup = omap_debugfs_cleanup, | |
| #endif | |
| .prime_handle_to_fd = drm_gem_prime_handle_to_fd, | |
| .prime_fd_to_handle = drm_gem_prime_fd_to_handle, | |
| .gem_prime_export = omap_gem_prime_export, | |
| .gem_prime_import = omap_gem_prime_import, | |
| .gem_free_object = omap_gem_free_object, | |
| .gem_vm_ops = &omap_gem_vm_ops, | |
| .dumb_create = omap_gem_dumb_create, | |
| .dumb_map_offset = omap_gem_dumb_map_offset, | |
| .dumb_destroy = drm_gem_dumb_destroy, | |
| .ioctls = ioctls, | |
| .num_ioctls = DRM_OMAP_NUM_IOCTLS, | |
| .fops = &omapdriver_fops, | |
| .name = DRIVER_NAME, | |
| .desc = DRIVER_DESC, | |
| .date = DRIVER_DATE, | |
| .major = DRIVER_MAJOR, | |
| .minor = DRIVER_MINOR, | |
| .patchlevel = DRIVER_PATCHLEVEL, | |
| }; | |
| static int pdev_probe(struct platform_device *device) | |
| { | |
| int r; | |
| if (omapdss_is_initialized() == false) | |
| return -EPROBE_DEFER; | |
| omap_crtc_pre_init(); | |
| r = omap_connect_dssdevs(); | |
| if (r) { | |
| omap_crtc_pre_uninit(); | |
| return r; | |
| } | |
| DBG("%s", device->name); | |
| return drm_platform_init(&omap_drm_driver, device); | |
| } | |
| static int pdev_remove(struct platform_device *device) | |
| { | |
| DBG(""); | |
| drm_put_dev(platform_get_drvdata(device)); | |
| omap_disconnect_dssdevs(); | |
| omap_crtc_pre_uninit(); | |
| return 0; | |
| } | |
| #ifdef CONFIG_PM_SLEEP | |
| static int omap_drm_suspend_all_displays(void) | |
| { | |
| struct omap_dss_device *dssdev = NULL; | |
| for_each_dss_dev(dssdev) { | |
| if (!dssdev->driver) | |
| continue; | |
| if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) { | |
| dssdev->driver->disable(dssdev); | |
| dssdev->activate_after_resume = true; | |
| } else { | |
| dssdev->activate_after_resume = false; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int omap_drm_resume_all_displays(void) | |
| { | |
| struct omap_dss_device *dssdev = NULL; | |
| for_each_dss_dev(dssdev) { | |
| if (!dssdev->driver) | |
| continue; | |
| if (dssdev->activate_after_resume) { | |
| dssdev->driver->enable(dssdev); | |
| dssdev->activate_after_resume = false; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int omap_drm_suspend(struct device *dev) | |
| { | |
| struct drm_device *drm_dev = dev_get_drvdata(dev); | |
| drm_kms_helper_poll_disable(drm_dev); | |
| drm_modeset_lock_all(drm_dev); | |
| omap_drm_suspend_all_displays(); | |
| drm_modeset_unlock_all(drm_dev); | |
| return 0; | |
| } | |
| static int omap_drm_resume(struct device *dev) | |
| { | |
| struct drm_device *drm_dev = dev_get_drvdata(dev); | |
| drm_modeset_lock_all(drm_dev); | |
| omap_drm_resume_all_displays(); | |
| drm_modeset_unlock_all(drm_dev); | |
| drm_kms_helper_poll_enable(drm_dev); | |
| return omap_gem_resume(dev); | |
| } | |
| #endif | |
| static SIMPLE_DEV_PM_OPS(omapdrm_pm_ops, omap_drm_suspend, omap_drm_resume); | |
| static struct platform_driver pdev = { | |
| .driver = { | |
| .name = DRIVER_NAME, | |
| .pm = &omapdrm_pm_ops, | |
| }, | |
| .probe = pdev_probe, | |
| .remove = pdev_remove, | |
| }; | |
| static struct platform_driver * const drivers[] = { | |
| &omap_dmm_driver, | |
| &pdev, | |
| }; | |
| static int __init omap_drm_init(void) | |
| { | |
| DBG("init"); | |
| return platform_register_drivers(drivers, ARRAY_SIZE(drivers)); | |
| } | |
| static void __exit omap_drm_fini(void) | |
| { | |
| DBG("fini"); | |
| platform_unregister_drivers(drivers, ARRAY_SIZE(drivers)); | |
| } | |
| /* need late_initcall() so we load after dss_driver's are loaded */ | |
| late_initcall(omap_drm_init); | |
| module_exit(omap_drm_fini); | |
| MODULE_AUTHOR("Rob Clark <rob@ti.com>"); | |
| MODULE_DESCRIPTION("OMAP DRM Display Driver"); | |
| MODULE_ALIAS("platform:" DRIVER_NAME); | |
| MODULE_LICENSE("GPL v2"); |