| /* | |
| * ads1015.c - lm_sensors driver for ads1015 12-bit 4-input ADC | |
| * (C) Copyright 2010 | |
| * Dirk Eibach, Guntermann & Drunck GmbH <eibach@gdsys.de> | |
| * | |
| * Based on the ads7828 driver by Steve Hardy. | |
| * | |
| * Datasheet available at: http://focus.ti.com/lit/ds/symlink/ads1015.pdf | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/slab.h> | |
| #include <linux/delay.h> | |
| #include <linux/i2c.h> | |
| #include <linux/hwmon.h> | |
| #include <linux/hwmon-sysfs.h> | |
| #include <linux/err.h> | |
| #include <linux/mutex.h> | |
| #include <linux/of.h> | |
| #include <linux/i2c/ads1015.h> | |
| /* ADS1015 registers */ | |
| enum { | |
| ADS1015_CONVERSION = 0, | |
| ADS1015_CONFIG = 1, | |
| }; | |
| /* PGA fullscale voltages in mV */ | |
| static const unsigned int fullscale_table[8] = { | |
| 6144, 4096, 2048, 1024, 512, 256, 256, 256 }; | |
| /* Data rates in samples per second */ | |
| static const unsigned int data_rate_table_1015[8] = { | |
| 128, 250, 490, 920, 1600, 2400, 3300, 3300 | |
| }; | |
| static const unsigned int data_rate_table_1115[8] = { | |
| 8, 16, 32, 64, 128, 250, 475, 860 | |
| }; | |
| #define ADS1015_DEFAULT_CHANNELS 0xff | |
| #define ADS1015_DEFAULT_PGA 2 | |
| #define ADS1015_DEFAULT_DATA_RATE 4 | |
| enum ads1015_chips { | |
| ads1015, | |
| ads1115, | |
| }; | |
| struct ads1015_data { | |
| struct device *hwmon_dev; | |
| struct mutex update_lock; /* mutex protect updates */ | |
| struct ads1015_channel_data channel_data[ADS1015_CHANNELS]; | |
| enum ads1015_chips id; | |
| }; | |
| static int ads1015_read_adc(struct i2c_client *client, unsigned int channel) | |
| { | |
| u16 config; | |
| struct ads1015_data *data = i2c_get_clientdata(client); | |
| unsigned int pga = data->channel_data[channel].pga; | |
| unsigned int data_rate = data->channel_data[channel].data_rate; | |
| unsigned int conversion_time_ms; | |
| const unsigned int * const rate_table = data->id == ads1115 ? | |
| data_rate_table_1115 : data_rate_table_1015; | |
| int res; | |
| mutex_lock(&data->update_lock); | |
| /* get channel parameters */ | |
| res = i2c_smbus_read_word_swapped(client, ADS1015_CONFIG); | |
| if (res < 0) | |
| goto err_unlock; | |
| config = res; | |
| conversion_time_ms = DIV_ROUND_UP(1000, rate_table[data_rate]); | |
| /* setup and start single conversion */ | |
| config &= 0x001f; | |
| config |= (1 << 15) | (1 << 8); | |
| config |= (channel & 0x0007) << 12; | |
| config |= (pga & 0x0007) << 9; | |
| config |= (data_rate & 0x0007) << 5; | |
| res = i2c_smbus_write_word_swapped(client, ADS1015_CONFIG, config); | |
| if (res < 0) | |
| goto err_unlock; | |
| /* wait until conversion finished */ | |
| msleep(conversion_time_ms); | |
| res = i2c_smbus_read_word_swapped(client, ADS1015_CONFIG); | |
| if (res < 0) | |
| goto err_unlock; | |
| config = res; | |
| if (!(config & (1 << 15))) { | |
| /* conversion not finished in time */ | |
| res = -EIO; | |
| goto err_unlock; | |
| } | |
| res = i2c_smbus_read_word_swapped(client, ADS1015_CONVERSION); | |
| err_unlock: | |
| mutex_unlock(&data->update_lock); | |
| return res; | |
| } | |
| static int ads1015_reg_to_mv(struct i2c_client *client, unsigned int channel, | |
| s16 reg) | |
| { | |
| struct ads1015_data *data = i2c_get_clientdata(client); | |
| unsigned int pga = data->channel_data[channel].pga; | |
| int fullscale = fullscale_table[pga]; | |
| const int mask = data->id == ads1115 ? 0x7fff : 0x7ff0; | |
| return DIV_ROUND_CLOSEST(reg * fullscale, mask); | |
| } | |
| /* sysfs callback function */ | |
| static ssize_t show_in(struct device *dev, struct device_attribute *da, | |
| char *buf) | |
| { | |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(da); | |
| struct i2c_client *client = to_i2c_client(dev); | |
| int res; | |
| int index = attr->index; | |
| res = ads1015_read_adc(client, index); | |
| if (res < 0) | |
| return res; | |
| return sprintf(buf, "%d\n", ads1015_reg_to_mv(client, index, res)); | |
| } | |
| static const struct sensor_device_attribute ads1015_in[] = { | |
| SENSOR_ATTR(in0_input, S_IRUGO, show_in, NULL, 0), | |
| SENSOR_ATTR(in1_input, S_IRUGO, show_in, NULL, 1), | |
| SENSOR_ATTR(in2_input, S_IRUGO, show_in, NULL, 2), | |
| SENSOR_ATTR(in3_input, S_IRUGO, show_in, NULL, 3), | |
| SENSOR_ATTR(in4_input, S_IRUGO, show_in, NULL, 4), | |
| SENSOR_ATTR(in5_input, S_IRUGO, show_in, NULL, 5), | |
| SENSOR_ATTR(in6_input, S_IRUGO, show_in, NULL, 6), | |
| SENSOR_ATTR(in7_input, S_IRUGO, show_in, NULL, 7), | |
| }; | |
| /* | |
| * Driver interface | |
| */ | |
| static int ads1015_remove(struct i2c_client *client) | |
| { | |
| struct ads1015_data *data = i2c_get_clientdata(client); | |
| int k; | |
| hwmon_device_unregister(data->hwmon_dev); | |
| for (k = 0; k < ADS1015_CHANNELS; ++k) | |
| device_remove_file(&client->dev, &ads1015_in[k].dev_attr); | |
| return 0; | |
| } | |
| #ifdef CONFIG_OF | |
| static int ads1015_get_channels_config_of(struct i2c_client *client) | |
| { | |
| struct ads1015_data *data = i2c_get_clientdata(client); | |
| struct device_node *node; | |
| if (!client->dev.of_node | |
| || !of_get_next_child(client->dev.of_node, NULL)) | |
| return -EINVAL; | |
| for_each_child_of_node(client->dev.of_node, node) { | |
| u32 pval; | |
| unsigned int channel; | |
| unsigned int pga = ADS1015_DEFAULT_PGA; | |
| unsigned int data_rate = ADS1015_DEFAULT_DATA_RATE; | |
| if (of_property_read_u32(node, "reg", &pval)) { | |
| dev_err(&client->dev, "invalid reg on %s\n", | |
| node->full_name); | |
| continue; | |
| } | |
| channel = pval; | |
| if (channel >= ADS1015_CHANNELS) { | |
| dev_err(&client->dev, | |
| "invalid channel index %d on %s\n", | |
| channel, node->full_name); | |
| continue; | |
| } | |
| if (!of_property_read_u32(node, "ti,gain", &pval)) { | |
| pga = pval; | |
| if (pga > 6) { | |
| dev_err(&client->dev, "invalid gain on %s\n", | |
| node->full_name); | |
| return -EINVAL; | |
| } | |
| } | |
| if (!of_property_read_u32(node, "ti,datarate", &pval)) { | |
| data_rate = pval; | |
| if (data_rate > 7) { | |
| dev_err(&client->dev, | |
| "invalid data_rate on %s\n", | |
| node->full_name); | |
| return -EINVAL; | |
| } | |
| } | |
| data->channel_data[channel].enabled = true; | |
| data->channel_data[channel].pga = pga; | |
| data->channel_data[channel].data_rate = data_rate; | |
| } | |
| return 0; | |
| } | |
| #endif | |
| static void ads1015_get_channels_config(struct i2c_client *client) | |
| { | |
| unsigned int k; | |
| struct ads1015_data *data = i2c_get_clientdata(client); | |
| struct ads1015_platform_data *pdata = dev_get_platdata(&client->dev); | |
| /* prefer platform data */ | |
| if (pdata) { | |
| memcpy(data->channel_data, pdata->channel_data, | |
| sizeof(data->channel_data)); | |
| return; | |
| } | |
| #ifdef CONFIG_OF | |
| if (!ads1015_get_channels_config_of(client)) | |
| return; | |
| #endif | |
| /* fallback on default configuration */ | |
| for (k = 0; k < ADS1015_CHANNELS; ++k) { | |
| data->channel_data[k].enabled = true; | |
| data->channel_data[k].pga = ADS1015_DEFAULT_PGA; | |
| data->channel_data[k].data_rate = ADS1015_DEFAULT_DATA_RATE; | |
| } | |
| } | |
| static int ads1015_probe(struct i2c_client *client, | |
| const struct i2c_device_id *id) | |
| { | |
| struct ads1015_data *data; | |
| int err; | |
| unsigned int k; | |
| data = devm_kzalloc(&client->dev, sizeof(struct ads1015_data), | |
| GFP_KERNEL); | |
| if (!data) | |
| return -ENOMEM; | |
| data->id = id->driver_data; | |
| i2c_set_clientdata(client, data); | |
| mutex_init(&data->update_lock); | |
| /* build sysfs attribute group */ | |
| ads1015_get_channels_config(client); | |
| for (k = 0; k < ADS1015_CHANNELS; ++k) { | |
| if (!data->channel_data[k].enabled) | |
| continue; | |
| err = device_create_file(&client->dev, &ads1015_in[k].dev_attr); | |
| if (err) | |
| goto exit_remove; | |
| } | |
| data->hwmon_dev = hwmon_device_register(&client->dev); | |
| if (IS_ERR(data->hwmon_dev)) { | |
| err = PTR_ERR(data->hwmon_dev); | |
| goto exit_remove; | |
| } | |
| return 0; | |
| exit_remove: | |
| for (k = 0; k < ADS1015_CHANNELS; ++k) | |
| device_remove_file(&client->dev, &ads1015_in[k].dev_attr); | |
| return err; | |
| } | |
| static const struct i2c_device_id ads1015_id[] = { | |
| { "ads1015", ads1015}, | |
| { "ads1115", ads1115}, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, ads1015_id); | |
| static struct i2c_driver ads1015_driver = { | |
| .driver = { | |
| .name = "ads1015", | |
| }, | |
| .probe = ads1015_probe, | |
| .remove = ads1015_remove, | |
| .id_table = ads1015_id, | |
| }; | |
| module_i2c_driver(ads1015_driver); | |
| MODULE_AUTHOR("Dirk Eibach <eibach@gdsys.de>"); | |
| MODULE_DESCRIPTION("ADS1015 driver"); | |
| MODULE_LICENSE("GPL"); |