| /* | |
| * ds1621.c - Part of lm_sensors, Linux kernel modules for hardware | |
| * monitoring | |
| * Christian W. Zuckschwerdt <zany@triq.net> 2000-11-23 | |
| * based on lm75.c by Frodo Looijaard <frodol@dds.nl> | |
| * Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with | |
| * the help of Jean Delvare <jdelvare@suse.de> | |
| * | |
| * The DS1621 device is a digital temperature/thermometer with 9-bit | |
| * resolution, a thermal alarm output (Tout), and user-defined minimum | |
| * and maximum temperature thresholds (TH and TL). | |
| * | |
| * The DS1625, DS1631, DS1721, and DS1731 are pin compatible with the DS1621 | |
| * and similar in operation, with slight variations as noted in the device | |
| * datasheets (please refer to www.maximintegrated.com for specific | |
| * device information). | |
| * | |
| * Since the DS1621 was the first chipset supported by this driver, | |
| * most comments will refer to this chipset, but are actually general | |
| * and concern all supported chipsets, unless mentioned otherwise. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/slab.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/i2c.h> | |
| #include <linux/hwmon.h> | |
| #include <linux/hwmon-sysfs.h> | |
| #include <linux/err.h> | |
| #include <linux/mutex.h> | |
| #include <linux/sysfs.h> | |
| #include <linux/kernel.h> | |
| /* Supported devices */ | |
| enum chips { ds1621, ds1625, ds1631, ds1721, ds1731 }; | |
| /* Insmod parameters */ | |
| static int polarity = -1; | |
| module_param(polarity, int, 0); | |
| MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low"); | |
| /* | |
| * The Configuration/Status register | |
| * | |
| * - DS1621: | |
| * 7 6 5 4 3 2 1 0 | |
| * |Done|THF |TLF |NVB | X | X |POL |1SHOT| | |
| * | |
| * - DS1625: | |
| * 7 6 5 4 3 2 1 0 | |
| * |Done|THF |TLF |NVB | 1 | 0 |POL |1SHOT| | |
| * | |
| * - DS1631, DS1731: | |
| * 7 6 5 4 3 2 1 0 | |
| * |Done|THF |TLF |NVB | R1 | R0 |POL |1SHOT| | |
| * | |
| * - DS1721: | |
| * 7 6 5 4 3 2 1 0 | |
| * |Done| X | X | U | R1 | R0 |POL |1SHOT| | |
| * | |
| * Where: | |
| * - 'X' is Reserved | |
| * - 'U' is Undefined | |
| */ | |
| #define DS1621_REG_CONFIG_NVB 0x10 | |
| #define DS1621_REG_CONFIG_RESOL 0x0C | |
| #define DS1621_REG_CONFIG_POLARITY 0x02 | |
| #define DS1621_REG_CONFIG_1SHOT 0x01 | |
| #define DS1621_REG_CONFIG_DONE 0x80 | |
| #define DS1621_REG_CONFIG_RESOL_SHIFT 2 | |
| /* ds1721 conversion rates: {C/LSB, time(ms), resolution bit setting} */ | |
| static const unsigned short ds1721_convrates[] = { | |
| 94, /* 9-bits (0.5, 93.75, RES[0..1] = 0 */ | |
| 188, /* 10-bits (0.25, 187.5, RES[0..1] = 1 */ | |
| 375, /* 11-bits (0.125, 375, RES[0..1] = 2 */ | |
| 750, /* 12-bits (0.0625, 750, RES[0..1] = 3 */ | |
| }; | |
| #define DS1621_CONVERSION_MAX 750 | |
| #define DS1625_CONVERSION_MAX 500 | |
| #define DS1621_TEMP_MAX 125000 | |
| #define DS1621_TEMP_MIN (-55000) | |
| /* The DS1621 temperature registers */ | |
| static const u8 DS1621_REG_TEMP[3] = { | |
| 0xAA, /* input, word, RO */ | |
| 0xA2, /* min, word, RW */ | |
| 0xA1, /* max, word, RW */ | |
| }; | |
| #define DS1621_REG_CONF 0xAC /* byte, RW */ | |
| #define DS1621_COM_START 0xEE /* no data */ | |
| #define DS1721_COM_START 0x51 /* no data */ | |
| #define DS1621_COM_STOP 0x22 /* no data */ | |
| /* The DS1621 configuration register */ | |
| #define DS1621_ALARM_TEMP_HIGH 0x40 | |
| #define DS1621_ALARM_TEMP_LOW 0x20 | |
| /* Conversions */ | |
| #define ALARMS_FROM_REG(val) ((val) & \ | |
| (DS1621_ALARM_TEMP_HIGH | DS1621_ALARM_TEMP_LOW)) | |
| /* Each client has this additional data */ | |
| struct ds1621_data { | |
| struct i2c_client *client; | |
| struct mutex update_lock; | |
| char valid; /* !=0 if following fields are valid */ | |
| unsigned long last_updated; /* In jiffies */ | |
| enum chips kind; /* device type */ | |
| u16 temp[3]; /* Register values, word */ | |
| u8 conf; /* Register encoding, combined */ | |
| u8 zbits; /* Resolution encoded as number of | |
| * zero bits */ | |
| u16 update_interval; /* Conversion rate in milliseconds */ | |
| }; | |
| static inline int DS1621_TEMP_FROM_REG(u16 reg) | |
| { | |
| return DIV_ROUND_CLOSEST(((s16)reg / 16) * 625, 10); | |
| } | |
| /* | |
| * TEMP: 0.001C/bit (-55C to +125C) | |
| * REG: | |
| * - 1621, 1625: 0.5C/bit, 7 zero-bits | |
| * - 1631, 1721, 1731: 0.0625C/bit, 4 zero-bits | |
| */ | |
| static inline u16 DS1621_TEMP_TO_REG(long temp, u8 zbits) | |
| { | |
| temp = clamp_val(temp, DS1621_TEMP_MIN, DS1621_TEMP_MAX); | |
| temp = DIV_ROUND_CLOSEST(temp * (1 << (8 - zbits)), 1000) << zbits; | |
| return temp; | |
| } | |
| static void ds1621_init_client(struct ds1621_data *data, | |
| struct i2c_client *client) | |
| { | |
| u8 conf, new_conf, sreg, resol; | |
| new_conf = conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF); | |
| /* switch to continuous conversion mode */ | |
| new_conf &= ~DS1621_REG_CONFIG_1SHOT; | |
| /* setup output polarity */ | |
| if (polarity == 0) | |
| new_conf &= ~DS1621_REG_CONFIG_POLARITY; | |
| else if (polarity == 1) | |
| new_conf |= DS1621_REG_CONFIG_POLARITY; | |
| if (conf != new_conf) | |
| i2c_smbus_write_byte_data(client, DS1621_REG_CONF, new_conf); | |
| switch (data->kind) { | |
| case ds1625: | |
| data->update_interval = DS1625_CONVERSION_MAX; | |
| data->zbits = 7; | |
| sreg = DS1621_COM_START; | |
| break; | |
| case ds1631: | |
| case ds1721: | |
| case ds1731: | |
| resol = (new_conf & DS1621_REG_CONFIG_RESOL) >> | |
| DS1621_REG_CONFIG_RESOL_SHIFT; | |
| data->update_interval = ds1721_convrates[resol]; | |
| data->zbits = 7 - resol; | |
| sreg = DS1721_COM_START; | |
| break; | |
| default: | |
| data->update_interval = DS1621_CONVERSION_MAX; | |
| data->zbits = 7; | |
| sreg = DS1621_COM_START; | |
| break; | |
| } | |
| /* start conversion */ | |
| i2c_smbus_write_byte(client, sreg); | |
| } | |
| static struct ds1621_data *ds1621_update_client(struct device *dev) | |
| { | |
| struct ds1621_data *data = dev_get_drvdata(dev); | |
| struct i2c_client *client = data->client; | |
| u8 new_conf; | |
| mutex_lock(&data->update_lock); | |
| if (time_after(jiffies, data->last_updated + data->update_interval) || | |
| !data->valid) { | |
| int i; | |
| dev_dbg(&client->dev, "Starting ds1621 update\n"); | |
| data->conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF); | |
| for (i = 0; i < ARRAY_SIZE(data->temp); i++) | |
| data->temp[i] = i2c_smbus_read_word_swapped(client, | |
| DS1621_REG_TEMP[i]); | |
| /* reset alarms if necessary */ | |
| new_conf = data->conf; | |
| if (data->temp[0] > data->temp[1]) /* input > min */ | |
| new_conf &= ~DS1621_ALARM_TEMP_LOW; | |
| if (data->temp[0] < data->temp[2]) /* input < max */ | |
| new_conf &= ~DS1621_ALARM_TEMP_HIGH; | |
| if (data->conf != new_conf) | |
| i2c_smbus_write_byte_data(client, DS1621_REG_CONF, | |
| new_conf); | |
| data->last_updated = jiffies; | |
| data->valid = 1; | |
| } | |
| mutex_unlock(&data->update_lock); | |
| return data; | |
| } | |
| static ssize_t show_temp(struct device *dev, struct device_attribute *da, | |
| char *buf) | |
| { | |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(da); | |
| struct ds1621_data *data = ds1621_update_client(dev); | |
| return sprintf(buf, "%d\n", | |
| DS1621_TEMP_FROM_REG(data->temp[attr->index])); | |
| } | |
| static ssize_t set_temp(struct device *dev, struct device_attribute *da, | |
| const char *buf, size_t count) | |
| { | |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(da); | |
| struct ds1621_data *data = dev_get_drvdata(dev); | |
| long val; | |
| int err; | |
| err = kstrtol(buf, 10, &val); | |
| if (err) | |
| return err; | |
| mutex_lock(&data->update_lock); | |
| data->temp[attr->index] = DS1621_TEMP_TO_REG(val, data->zbits); | |
| i2c_smbus_write_word_swapped(data->client, DS1621_REG_TEMP[attr->index], | |
| data->temp[attr->index]); | |
| mutex_unlock(&data->update_lock); | |
| return count; | |
| } | |
| static ssize_t show_alarms(struct device *dev, struct device_attribute *da, | |
| char *buf) | |
| { | |
| struct ds1621_data *data = ds1621_update_client(dev); | |
| return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->conf)); | |
| } | |
| static ssize_t show_alarm(struct device *dev, struct device_attribute *da, | |
| char *buf) | |
| { | |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(da); | |
| struct ds1621_data *data = ds1621_update_client(dev); | |
| return sprintf(buf, "%d\n", !!(data->conf & attr->index)); | |
| } | |
| static ssize_t show_convrate(struct device *dev, struct device_attribute *da, | |
| char *buf) | |
| { | |
| struct ds1621_data *data = dev_get_drvdata(dev); | |
| return scnprintf(buf, PAGE_SIZE, "%hu\n", data->update_interval); | |
| } | |
| static ssize_t set_convrate(struct device *dev, struct device_attribute *da, | |
| const char *buf, size_t count) | |
| { | |
| struct ds1621_data *data = dev_get_drvdata(dev); | |
| struct i2c_client *client = data->client; | |
| unsigned long convrate; | |
| s32 err; | |
| int resol = 0; | |
| err = kstrtoul(buf, 10, &convrate); | |
| if (err) | |
| return err; | |
| /* Convert rate into resolution bits */ | |
| while (resol < (ARRAY_SIZE(ds1721_convrates) - 1) && | |
| convrate > ds1721_convrates[resol]) | |
| resol++; | |
| mutex_lock(&data->update_lock); | |
| data->conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF); | |
| data->conf &= ~DS1621_REG_CONFIG_RESOL; | |
| data->conf |= (resol << DS1621_REG_CONFIG_RESOL_SHIFT); | |
| i2c_smbus_write_byte_data(client, DS1621_REG_CONF, data->conf); | |
| data->update_interval = ds1721_convrates[resol]; | |
| data->zbits = 7 - resol; | |
| mutex_unlock(&data->update_lock); | |
| return count; | |
| } | |
| static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); | |
| static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO, show_convrate, | |
| set_convrate); | |
| static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); | |
| static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp, set_temp, 1); | |
| static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp, set_temp, 2); | |
| static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, | |
| DS1621_ALARM_TEMP_LOW); | |
| static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, | |
| DS1621_ALARM_TEMP_HIGH); | |
| static struct attribute *ds1621_attributes[] = { | |
| &sensor_dev_attr_temp1_input.dev_attr.attr, | |
| &sensor_dev_attr_temp1_min.dev_attr.attr, | |
| &sensor_dev_attr_temp1_max.dev_attr.attr, | |
| &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, | |
| &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, | |
| &dev_attr_alarms.attr, | |
| &dev_attr_update_interval.attr, | |
| NULL | |
| }; | |
| static umode_t ds1621_attribute_visible(struct kobject *kobj, | |
| struct attribute *attr, int index) | |
| { | |
| struct device *dev = container_of(kobj, struct device, kobj); | |
| struct ds1621_data *data = dev_get_drvdata(dev); | |
| if (attr == &dev_attr_update_interval.attr) | |
| if (data->kind == ds1621 || data->kind == ds1625) | |
| /* shhh, we're hiding update_interval */ | |
| return 0; | |
| return attr->mode; | |
| } | |
| static const struct attribute_group ds1621_group = { | |
| .attrs = ds1621_attributes, | |
| .is_visible = ds1621_attribute_visible | |
| }; | |
| __ATTRIBUTE_GROUPS(ds1621); | |
| static int ds1621_probe(struct i2c_client *client, | |
| const struct i2c_device_id *id) | |
| { | |
| struct ds1621_data *data; | |
| struct device *hwmon_dev; | |
| data = devm_kzalloc(&client->dev, sizeof(struct ds1621_data), | |
| GFP_KERNEL); | |
| if (!data) | |
| return -ENOMEM; | |
| mutex_init(&data->update_lock); | |
| data->kind = id->driver_data; | |
| data->client = client; | |
| /* Initialize the DS1621 chip */ | |
| ds1621_init_client(data, client); | |
| hwmon_dev = devm_hwmon_device_register_with_groups(&client->dev, | |
| client->name, data, | |
| ds1621_groups); | |
| return PTR_ERR_OR_ZERO(hwmon_dev); | |
| } | |
| static const struct i2c_device_id ds1621_id[] = { | |
| { "ds1621", ds1621 }, | |
| { "ds1625", ds1625 }, | |
| { "ds1631", ds1631 }, | |
| { "ds1721", ds1721 }, | |
| { "ds1731", ds1731 }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, ds1621_id); | |
| /* This is the driver that will be inserted */ | |
| static struct i2c_driver ds1621_driver = { | |
| .class = I2C_CLASS_HWMON, | |
| .driver = { | |
| .name = "ds1621", | |
| }, | |
| .probe = ds1621_probe, | |
| .id_table = ds1621_id, | |
| }; | |
| module_i2c_driver(ds1621_driver); | |
| MODULE_AUTHOR("Christian W. Zuckschwerdt <zany@triq.net>"); | |
| MODULE_DESCRIPTION("DS1621 driver"); | |
| MODULE_LICENSE("GPL"); |