| /* | |
| * Driver for Texas Instruments / National Semiconductor LM95234 | |
| * | |
| * Copyright (c) 2013, 2014 Guenter Roeck <linux@roeck-us.net> | |
| * | |
| * Derived from lm95241.c | |
| * Copyright (C) 2008, 2010 Davide Rizzo <elpa.rizzo@gmail.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/slab.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/i2c.h> | |
| #include <linux/hwmon.h> | |
| #include <linux/hwmon-sysfs.h> | |
| #include <linux/err.h> | |
| #include <linux/mutex.h> | |
| #include <linux/sysfs.h> | |
| #define DRVNAME "lm95234" | |
| enum chips { lm95233, lm95234 }; | |
| static const unsigned short normal_i2c[] = { | |
| 0x18, 0x2a, 0x2b, 0x4d, 0x4e, I2C_CLIENT_END }; | |
| /* LM95234 registers */ | |
| #define LM95234_REG_MAN_ID 0xFE | |
| #define LM95234_REG_CHIP_ID 0xFF | |
| #define LM95234_REG_STATUS 0x02 | |
| #define LM95234_REG_CONFIG 0x03 | |
| #define LM95234_REG_CONVRATE 0x04 | |
| #define LM95234_REG_STS_FAULT 0x07 | |
| #define LM95234_REG_STS_TCRIT1 0x08 | |
| #define LM95234_REG_STS_TCRIT2 0x09 | |
| #define LM95234_REG_TEMPH(x) ((x) + 0x10) | |
| #define LM95234_REG_TEMPL(x) ((x) + 0x20) | |
| #define LM95234_REG_UTEMPH(x) ((x) + 0x19) /* Remote only */ | |
| #define LM95234_REG_UTEMPL(x) ((x) + 0x29) | |
| #define LM95234_REG_REM_MODEL 0x30 | |
| #define LM95234_REG_REM_MODEL_STS 0x38 | |
| #define LM95234_REG_OFFSET(x) ((x) + 0x31) /* Remote only */ | |
| #define LM95234_REG_TCRIT1(x) ((x) + 0x40) | |
| #define LM95234_REG_TCRIT2(x) ((x) + 0x49) /* Remote channel 1,2 */ | |
| #define LM95234_REG_TCRIT_HYST 0x5a | |
| #define NATSEMI_MAN_ID 0x01 | |
| #define LM95233_CHIP_ID 0x89 | |
| #define LM95234_CHIP_ID 0x79 | |
| /* Client data (each client gets its own) */ | |
| struct lm95234_data { | |
| struct i2c_client *client; | |
| const struct attribute_group *groups[3]; | |
| struct mutex update_lock; | |
| unsigned long last_updated, interval; /* in jiffies */ | |
| bool valid; /* false until following fields are valid */ | |
| /* registers values */ | |
| int temp[5]; /* temperature (signed) */ | |
| u32 status; /* fault/alarm status */ | |
| u8 tcrit1[5]; /* critical temperature limit */ | |
| u8 tcrit2[2]; /* high temperature limit */ | |
| s8 toffset[4]; /* remote temperature offset */ | |
| u8 thyst; /* common hysteresis */ | |
| u8 sensor_type; /* temperature sensor type */ | |
| }; | |
| static int lm95234_read_temp(struct i2c_client *client, int index, int *t) | |
| { | |
| int val; | |
| u16 temp = 0; | |
| if (index) { | |
| val = i2c_smbus_read_byte_data(client, | |
| LM95234_REG_UTEMPH(index - 1)); | |
| if (val < 0) | |
| return val; | |
| temp = val << 8; | |
| val = i2c_smbus_read_byte_data(client, | |
| LM95234_REG_UTEMPL(index - 1)); | |
| if (val < 0) | |
| return val; | |
| temp |= val; | |
| *t = temp; | |
| } | |
| /* | |
| * Read signed temperature if unsigned temperature is 0, | |
| * or if this is the local sensor. | |
| */ | |
| if (!temp) { | |
| val = i2c_smbus_read_byte_data(client, | |
| LM95234_REG_TEMPH(index)); | |
| if (val < 0) | |
| return val; | |
| temp = val << 8; | |
| val = i2c_smbus_read_byte_data(client, | |
| LM95234_REG_TEMPL(index)); | |
| if (val < 0) | |
| return val; | |
| temp |= val; | |
| *t = (s16)temp; | |
| } | |
| return 0; | |
| } | |
| static u16 update_intervals[] = { 143, 364, 1000, 2500 }; | |
| /* Fill value cache. Must be called with update lock held. */ | |
| static int lm95234_fill_cache(struct lm95234_data *data, | |
| struct i2c_client *client) | |
| { | |
| int i, ret; | |
| ret = i2c_smbus_read_byte_data(client, LM95234_REG_CONVRATE); | |
| if (ret < 0) | |
| return ret; | |
| data->interval = msecs_to_jiffies(update_intervals[ret & 0x03]); | |
| for (i = 0; i < ARRAY_SIZE(data->tcrit1); i++) { | |
| ret = i2c_smbus_read_byte_data(client, LM95234_REG_TCRIT1(i)); | |
| if (ret < 0) | |
| return ret; | |
| data->tcrit1[i] = ret; | |
| } | |
| for (i = 0; i < ARRAY_SIZE(data->tcrit2); i++) { | |
| ret = i2c_smbus_read_byte_data(client, LM95234_REG_TCRIT2(i)); | |
| if (ret < 0) | |
| return ret; | |
| data->tcrit2[i] = ret; | |
| } | |
| for (i = 0; i < ARRAY_SIZE(data->toffset); i++) { | |
| ret = i2c_smbus_read_byte_data(client, LM95234_REG_OFFSET(i)); | |
| if (ret < 0) | |
| return ret; | |
| data->toffset[i] = ret; | |
| } | |
| ret = i2c_smbus_read_byte_data(client, LM95234_REG_TCRIT_HYST); | |
| if (ret < 0) | |
| return ret; | |
| data->thyst = ret; | |
| ret = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL); | |
| if (ret < 0) | |
| return ret; | |
| data->sensor_type = ret; | |
| return 0; | |
| } | |
| static int lm95234_update_device(struct lm95234_data *data) | |
| { | |
| struct i2c_client *client = data->client; | |
| int ret; | |
| mutex_lock(&data->update_lock); | |
| if (time_after(jiffies, data->last_updated + data->interval) || | |
| !data->valid) { | |
| int i; | |
| if (!data->valid) { | |
| ret = lm95234_fill_cache(data, client); | |
| if (ret < 0) | |
| goto abort; | |
| } | |
| data->valid = false; | |
| for (i = 0; i < ARRAY_SIZE(data->temp); i++) { | |
| ret = lm95234_read_temp(client, i, &data->temp[i]); | |
| if (ret < 0) | |
| goto abort; | |
| } | |
| ret = i2c_smbus_read_byte_data(client, LM95234_REG_STS_FAULT); | |
| if (ret < 0) | |
| goto abort; | |
| data->status = ret; | |
| ret = i2c_smbus_read_byte_data(client, LM95234_REG_STS_TCRIT1); | |
| if (ret < 0) | |
| goto abort; | |
| data->status |= ret << 8; | |
| ret = i2c_smbus_read_byte_data(client, LM95234_REG_STS_TCRIT2); | |
| if (ret < 0) | |
| goto abort; | |
| data->status |= ret << 16; | |
| data->last_updated = jiffies; | |
| data->valid = true; | |
| } | |
| ret = 0; | |
| abort: | |
| mutex_unlock(&data->update_lock); | |
| return ret; | |
| } | |
| static ssize_t show_temp(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct lm95234_data *data = dev_get_drvdata(dev); | |
| int index = to_sensor_dev_attr(attr)->index; | |
| int ret = lm95234_update_device(data); | |
| if (ret) | |
| return ret; | |
| return sprintf(buf, "%d\n", | |
| DIV_ROUND_CLOSEST(data->temp[index] * 125, 32)); | |
| } | |
| static ssize_t show_alarm(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct lm95234_data *data = dev_get_drvdata(dev); | |
| u32 mask = to_sensor_dev_attr(attr)->index; | |
| int ret = lm95234_update_device(data); | |
| if (ret) | |
| return ret; | |
| return sprintf(buf, "%u", !!(data->status & mask)); | |
| } | |
| static ssize_t show_type(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct lm95234_data *data = dev_get_drvdata(dev); | |
| u8 mask = to_sensor_dev_attr(attr)->index; | |
| int ret = lm95234_update_device(data); | |
| if (ret) | |
| return ret; | |
| return sprintf(buf, data->sensor_type & mask ? "1\n" : "2\n"); | |
| } | |
| static ssize_t set_type(struct device *dev, struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct lm95234_data *data = dev_get_drvdata(dev); | |
| unsigned long val; | |
| u8 mask = to_sensor_dev_attr(attr)->index; | |
| int ret = lm95234_update_device(data); | |
| if (ret) | |
| return ret; | |
| ret = kstrtoul(buf, 10, &val); | |
| if (ret < 0) | |
| return ret; | |
| if (val != 1 && val != 2) | |
| return -EINVAL; | |
| mutex_lock(&data->update_lock); | |
| if (val == 1) | |
| data->sensor_type |= mask; | |
| else | |
| data->sensor_type &= ~mask; | |
| data->valid = false; | |
| i2c_smbus_write_byte_data(data->client, LM95234_REG_REM_MODEL, | |
| data->sensor_type); | |
| mutex_unlock(&data->update_lock); | |
| return count; | |
| } | |
| static ssize_t show_tcrit2(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct lm95234_data *data = dev_get_drvdata(dev); | |
| int index = to_sensor_dev_attr(attr)->index; | |
| int ret = lm95234_update_device(data); | |
| if (ret) | |
| return ret; | |
| return sprintf(buf, "%u", data->tcrit2[index] * 1000); | |
| } | |
| static ssize_t set_tcrit2(struct device *dev, struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct lm95234_data *data = dev_get_drvdata(dev); | |
| int index = to_sensor_dev_attr(attr)->index; | |
| long val; | |
| int ret = lm95234_update_device(data); | |
| if (ret) | |
| return ret; | |
| ret = kstrtol(buf, 10, &val); | |
| if (ret < 0) | |
| return ret; | |
| val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, index ? 255 : 127); | |
| mutex_lock(&data->update_lock); | |
| data->tcrit2[index] = val; | |
| i2c_smbus_write_byte_data(data->client, LM95234_REG_TCRIT2(index), val); | |
| mutex_unlock(&data->update_lock); | |
| return count; | |
| } | |
| static ssize_t show_tcrit2_hyst(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct lm95234_data *data = dev_get_drvdata(dev); | |
| int index = to_sensor_dev_attr(attr)->index; | |
| int ret = lm95234_update_device(data); | |
| if (ret) | |
| return ret; | |
| /* Result can be negative, so be careful with unsigned operands */ | |
| return sprintf(buf, "%d", | |
| ((int)data->tcrit2[index] - (int)data->thyst) * 1000); | |
| } | |
| static ssize_t show_tcrit1(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct lm95234_data *data = dev_get_drvdata(dev); | |
| int index = to_sensor_dev_attr(attr)->index; | |
| return sprintf(buf, "%u", data->tcrit1[index] * 1000); | |
| } | |
| static ssize_t set_tcrit1(struct device *dev, struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct lm95234_data *data = dev_get_drvdata(dev); | |
| int index = to_sensor_dev_attr(attr)->index; | |
| int ret = lm95234_update_device(data); | |
| long val; | |
| if (ret) | |
| return ret; | |
| ret = kstrtol(buf, 10, &val); | |
| if (ret < 0) | |
| return ret; | |
| val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, 255); | |
| mutex_lock(&data->update_lock); | |
| data->tcrit1[index] = val; | |
| i2c_smbus_write_byte_data(data->client, LM95234_REG_TCRIT1(index), val); | |
| mutex_unlock(&data->update_lock); | |
| return count; | |
| } | |
| static ssize_t show_tcrit1_hyst(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct lm95234_data *data = dev_get_drvdata(dev); | |
| int index = to_sensor_dev_attr(attr)->index; | |
| int ret = lm95234_update_device(data); | |
| if (ret) | |
| return ret; | |
| /* Result can be negative, so be careful with unsigned operands */ | |
| return sprintf(buf, "%d", | |
| ((int)data->tcrit1[index] - (int)data->thyst) * 1000); | |
| } | |
| static ssize_t set_tcrit1_hyst(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct lm95234_data *data = dev_get_drvdata(dev); | |
| int index = to_sensor_dev_attr(attr)->index; | |
| int ret = lm95234_update_device(data); | |
| long val; | |
| if (ret) | |
| return ret; | |
| ret = kstrtol(buf, 10, &val); | |
| if (ret < 0) | |
| return ret; | |
| val = DIV_ROUND_CLOSEST(val, 1000); | |
| val = clamp_val((int)data->tcrit1[index] - val, 0, 31); | |
| mutex_lock(&data->update_lock); | |
| data->thyst = val; | |
| i2c_smbus_write_byte_data(data->client, LM95234_REG_TCRIT_HYST, val); | |
| mutex_unlock(&data->update_lock); | |
| return count; | |
| } | |
| static ssize_t show_offset(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct lm95234_data *data = dev_get_drvdata(dev); | |
| int index = to_sensor_dev_attr(attr)->index; | |
| int ret = lm95234_update_device(data); | |
| if (ret) | |
| return ret; | |
| return sprintf(buf, "%d", data->toffset[index] * 500); | |
| } | |
| static ssize_t set_offset(struct device *dev, struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct lm95234_data *data = dev_get_drvdata(dev); | |
| int index = to_sensor_dev_attr(attr)->index; | |
| int ret = lm95234_update_device(data); | |
| long val; | |
| if (ret) | |
| return ret; | |
| ret = kstrtol(buf, 10, &val); | |
| if (ret < 0) | |
| return ret; | |
| /* Accuracy is 1/2 degrees C */ | |
| val = clamp_val(DIV_ROUND_CLOSEST(val, 500), -128, 127); | |
| mutex_lock(&data->update_lock); | |
| data->toffset[index] = val; | |
| i2c_smbus_write_byte_data(data->client, LM95234_REG_OFFSET(index), val); | |
| mutex_unlock(&data->update_lock); | |
| return count; | |
| } | |
| static ssize_t show_interval(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct lm95234_data *data = dev_get_drvdata(dev); | |
| int ret = lm95234_update_device(data); | |
| if (ret) | |
| return ret; | |
| return sprintf(buf, "%lu\n", | |
| DIV_ROUND_CLOSEST(data->interval * 1000, HZ)); | |
| } | |
| static ssize_t set_interval(struct device *dev, struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct lm95234_data *data = dev_get_drvdata(dev); | |
| int ret = lm95234_update_device(data); | |
| unsigned long val; | |
| u8 regval; | |
| if (ret) | |
| return ret; | |
| ret = kstrtoul(buf, 10, &val); | |
| if (ret < 0) | |
| return ret; | |
| for (regval = 0; regval < 3; regval++) { | |
| if (val <= update_intervals[regval]) | |
| break; | |
| } | |
| mutex_lock(&data->update_lock); | |
| data->interval = msecs_to_jiffies(update_intervals[regval]); | |
| i2c_smbus_write_byte_data(data->client, LM95234_REG_CONVRATE, regval); | |
| mutex_unlock(&data->update_lock); | |
| return count; | |
| } | |
| static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); | |
| static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1); | |
| static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2); | |
| static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3); | |
| static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, show_temp, NULL, 4); | |
| static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, | |
| BIT(0) | BIT(1)); | |
| static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, | |
| BIT(2) | BIT(3)); | |
| static SENSOR_DEVICE_ATTR(temp4_fault, S_IRUGO, show_alarm, NULL, | |
| BIT(4) | BIT(5)); | |
| static SENSOR_DEVICE_ATTR(temp5_fault, S_IRUGO, show_alarm, NULL, | |
| BIT(6) | BIT(7)); | |
| static SENSOR_DEVICE_ATTR(temp2_type, S_IWUSR | S_IRUGO, show_type, set_type, | |
| BIT(1)); | |
| static SENSOR_DEVICE_ATTR(temp3_type, S_IWUSR | S_IRUGO, show_type, set_type, | |
| BIT(2)); | |
| static SENSOR_DEVICE_ATTR(temp4_type, S_IWUSR | S_IRUGO, show_type, set_type, | |
| BIT(3)); | |
| static SENSOR_DEVICE_ATTR(temp5_type, S_IWUSR | S_IRUGO, show_type, set_type, | |
| BIT(4)); | |
| static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_tcrit1, | |
| set_tcrit1, 0); | |
| static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_tcrit2, | |
| set_tcrit2, 0); | |
| static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_tcrit2, | |
| set_tcrit2, 1); | |
| static SENSOR_DEVICE_ATTR(temp4_max, S_IWUSR | S_IRUGO, show_tcrit1, | |
| set_tcrit1, 3); | |
| static SENSOR_DEVICE_ATTR(temp5_max, S_IWUSR | S_IRUGO, show_tcrit1, | |
| set_tcrit1, 4); | |
| static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, show_tcrit1_hyst, | |
| set_tcrit1_hyst, 0); | |
| static SENSOR_DEVICE_ATTR(temp2_max_hyst, S_IRUGO, show_tcrit2_hyst, NULL, 0); | |
| static SENSOR_DEVICE_ATTR(temp3_max_hyst, S_IRUGO, show_tcrit2_hyst, NULL, 1); | |
| static SENSOR_DEVICE_ATTR(temp4_max_hyst, S_IRUGO, show_tcrit1_hyst, NULL, 3); | |
| static SENSOR_DEVICE_ATTR(temp5_max_hyst, S_IRUGO, show_tcrit1_hyst, NULL, 4); | |
| static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, | |
| BIT(0 + 8)); | |
| static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, | |
| BIT(1 + 16)); | |
| static SENSOR_DEVICE_ATTR(temp3_max_alarm, S_IRUGO, show_alarm, NULL, | |
| BIT(2 + 16)); | |
| static SENSOR_DEVICE_ATTR(temp4_max_alarm, S_IRUGO, show_alarm, NULL, | |
| BIT(3 + 8)); | |
| static SENSOR_DEVICE_ATTR(temp5_max_alarm, S_IRUGO, show_alarm, NULL, | |
| BIT(4 + 8)); | |
| static SENSOR_DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_tcrit1, | |
| set_tcrit1, 1); | |
| static SENSOR_DEVICE_ATTR(temp3_crit, S_IWUSR | S_IRUGO, show_tcrit1, | |
| set_tcrit1, 2); | |
| static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_tcrit1_hyst, NULL, 1); | |
| static SENSOR_DEVICE_ATTR(temp3_crit_hyst, S_IRUGO, show_tcrit1_hyst, NULL, 2); | |
| static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, | |
| BIT(1 + 8)); | |
| static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO, show_alarm, NULL, | |
| BIT(2 + 8)); | |
| static SENSOR_DEVICE_ATTR(temp2_offset, S_IWUSR | S_IRUGO, show_offset, | |
| set_offset, 0); | |
| static SENSOR_DEVICE_ATTR(temp3_offset, S_IWUSR | S_IRUGO, show_offset, | |
| set_offset, 1); | |
| static SENSOR_DEVICE_ATTR(temp4_offset, S_IWUSR | S_IRUGO, show_offset, | |
| set_offset, 2); | |
| static SENSOR_DEVICE_ATTR(temp5_offset, S_IWUSR | S_IRUGO, show_offset, | |
| set_offset, 3); | |
| static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO, show_interval, | |
| set_interval); | |
| static struct attribute *lm95234_common_attrs[] = { | |
| &sensor_dev_attr_temp1_input.dev_attr.attr, | |
| &sensor_dev_attr_temp2_input.dev_attr.attr, | |
| &sensor_dev_attr_temp3_input.dev_attr.attr, | |
| &sensor_dev_attr_temp2_fault.dev_attr.attr, | |
| &sensor_dev_attr_temp3_fault.dev_attr.attr, | |
| &sensor_dev_attr_temp2_type.dev_attr.attr, | |
| &sensor_dev_attr_temp3_type.dev_attr.attr, | |
| &sensor_dev_attr_temp1_max.dev_attr.attr, | |
| &sensor_dev_attr_temp2_max.dev_attr.attr, | |
| &sensor_dev_attr_temp3_max.dev_attr.attr, | |
| &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, | |
| &sensor_dev_attr_temp2_max_hyst.dev_attr.attr, | |
| &sensor_dev_attr_temp3_max_hyst.dev_attr.attr, | |
| &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, | |
| &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, | |
| &sensor_dev_attr_temp3_max_alarm.dev_attr.attr, | |
| &sensor_dev_attr_temp2_crit.dev_attr.attr, | |
| &sensor_dev_attr_temp3_crit.dev_attr.attr, | |
| &sensor_dev_attr_temp2_crit_hyst.dev_attr.attr, | |
| &sensor_dev_attr_temp3_crit_hyst.dev_attr.attr, | |
| &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, | |
| &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr, | |
| &sensor_dev_attr_temp2_offset.dev_attr.attr, | |
| &sensor_dev_attr_temp3_offset.dev_attr.attr, | |
| &dev_attr_update_interval.attr, | |
| NULL | |
| }; | |
| static const struct attribute_group lm95234_common_group = { | |
| .attrs = lm95234_common_attrs, | |
| }; | |
| static struct attribute *lm95234_attrs[] = { | |
| &sensor_dev_attr_temp4_input.dev_attr.attr, | |
| &sensor_dev_attr_temp5_input.dev_attr.attr, | |
| &sensor_dev_attr_temp4_fault.dev_attr.attr, | |
| &sensor_dev_attr_temp5_fault.dev_attr.attr, | |
| &sensor_dev_attr_temp4_type.dev_attr.attr, | |
| &sensor_dev_attr_temp5_type.dev_attr.attr, | |
| &sensor_dev_attr_temp4_max.dev_attr.attr, | |
| &sensor_dev_attr_temp5_max.dev_attr.attr, | |
| &sensor_dev_attr_temp4_max_hyst.dev_attr.attr, | |
| &sensor_dev_attr_temp5_max_hyst.dev_attr.attr, | |
| &sensor_dev_attr_temp4_max_alarm.dev_attr.attr, | |
| &sensor_dev_attr_temp5_max_alarm.dev_attr.attr, | |
| &sensor_dev_attr_temp4_offset.dev_attr.attr, | |
| &sensor_dev_attr_temp5_offset.dev_attr.attr, | |
| NULL | |
| }; | |
| static const struct attribute_group lm95234_group = { | |
| .attrs = lm95234_attrs, | |
| }; | |
| static int lm95234_detect(struct i2c_client *client, | |
| struct i2c_board_info *info) | |
| { | |
| struct i2c_adapter *adapter = client->adapter; | |
| int address = client->addr; | |
| u8 config_mask, model_mask; | |
| int mfg_id, chip_id, val; | |
| const char *name; | |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) | |
| return -ENODEV; | |
| mfg_id = i2c_smbus_read_byte_data(client, LM95234_REG_MAN_ID); | |
| if (mfg_id != NATSEMI_MAN_ID) | |
| return -ENODEV; | |
| chip_id = i2c_smbus_read_byte_data(client, LM95234_REG_CHIP_ID); | |
| switch (chip_id) { | |
| case LM95233_CHIP_ID: | |
| if (address != 0x18 && address != 0x2a && address != 0x2b) | |
| return -ENODEV; | |
| config_mask = 0xbf; | |
| model_mask = 0xf9; | |
| name = "lm95233"; | |
| break; | |
| case LM95234_CHIP_ID: | |
| if (address != 0x18 && address != 0x4d && address != 0x4e) | |
| return -ENODEV; | |
| config_mask = 0xbc; | |
| model_mask = 0xe1; | |
| name = "lm95234"; | |
| break; | |
| default: | |
| return -ENODEV; | |
| } | |
| val = i2c_smbus_read_byte_data(client, LM95234_REG_STATUS); | |
| if (val & 0x30) | |
| return -ENODEV; | |
| val = i2c_smbus_read_byte_data(client, LM95234_REG_CONFIG); | |
| if (val & config_mask) | |
| return -ENODEV; | |
| val = i2c_smbus_read_byte_data(client, LM95234_REG_CONVRATE); | |
| if (val & 0xfc) | |
| return -ENODEV; | |
| val = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL); | |
| if (val & model_mask) | |
| return -ENODEV; | |
| val = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL_STS); | |
| if (val & model_mask) | |
| return -ENODEV; | |
| strlcpy(info->type, name, I2C_NAME_SIZE); | |
| return 0; | |
| } | |
| static int lm95234_init_client(struct i2c_client *client) | |
| { | |
| int val, model; | |
| /* start conversion if necessary */ | |
| val = i2c_smbus_read_byte_data(client, LM95234_REG_CONFIG); | |
| if (val < 0) | |
| return val; | |
| if (val & 0x40) | |
| i2c_smbus_write_byte_data(client, LM95234_REG_CONFIG, | |
| val & ~0x40); | |
| /* If diode type status reports an error, try to fix it */ | |
| val = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL_STS); | |
| if (val < 0) | |
| return val; | |
| model = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL); | |
| if (model < 0) | |
| return model; | |
| if (model & val) { | |
| dev_notice(&client->dev, | |
| "Fixing remote diode type misconfiguration (0x%x)\n", | |
| val); | |
| i2c_smbus_write_byte_data(client, LM95234_REG_REM_MODEL, | |
| model & ~val); | |
| } | |
| return 0; | |
| } | |
| static int lm95234_probe(struct i2c_client *client, | |
| const struct i2c_device_id *id) | |
| { | |
| struct device *dev = &client->dev; | |
| struct lm95234_data *data; | |
| struct device *hwmon_dev; | |
| int err; | |
| data = devm_kzalloc(dev, sizeof(struct lm95234_data), GFP_KERNEL); | |
| if (!data) | |
| return -ENOMEM; | |
| data->client = client; | |
| mutex_init(&data->update_lock); | |
| /* Initialize the LM95234 chip */ | |
| err = lm95234_init_client(client); | |
| if (err < 0) | |
| return err; | |
| data->groups[0] = &lm95234_common_group; | |
| if (id->driver_data == lm95234) | |
| data->groups[1] = &lm95234_group; | |
| hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, | |
| data, data->groups); | |
| return PTR_ERR_OR_ZERO(hwmon_dev); | |
| } | |
| /* Driver data (common to all clients) */ | |
| static const struct i2c_device_id lm95234_id[] = { | |
| { "lm95233", lm95233 }, | |
| { "lm95234", lm95234 }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, lm95234_id); | |
| static struct i2c_driver lm95234_driver = { | |
| .class = I2C_CLASS_HWMON, | |
| .driver = { | |
| .name = DRVNAME, | |
| }, | |
| .probe = lm95234_probe, | |
| .id_table = lm95234_id, | |
| .detect = lm95234_detect, | |
| .address_list = normal_i2c, | |
| }; | |
| module_i2c_driver(lm95234_driver); | |
| MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>"); | |
| MODULE_DESCRIPTION("LM95233/LM95234 sensor driver"); | |
| MODULE_LICENSE("GPL"); |