| /* | |
| * smsc47b397.c - Part of lm_sensors, Linux kernel modules | |
| * for hardware monitoring | |
| * | |
| * Supports the SMSC LPC47B397-NC Super-I/O chip. | |
| * | |
| * Author/Maintainer: Mark M. Hoffman <mhoffman@lightlink.com> | |
| * Copyright (C) 2004 Utilitek Systems, Inc. | |
| * | |
| * derived in part from smsc47m1.c: | |
| * Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com> | |
| * Copyright (C) 2004 Jean Delvare <jdelvare@suse.de> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/module.h> | |
| #include <linux/slab.h> | |
| #include <linux/ioport.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/hwmon.h> | |
| #include <linux/hwmon-sysfs.h> | |
| #include <linux/err.h> | |
| #include <linux/init.h> | |
| #include <linux/mutex.h> | |
| #include <linux/acpi.h> | |
| #include <linux/io.h> | |
| static unsigned short force_id; | |
| module_param(force_id, ushort, 0); | |
| MODULE_PARM_DESC(force_id, "Override the detected device ID"); | |
| static struct platform_device *pdev; | |
| #define DRVNAME "smsc47b397" | |
| /* Super-I/0 registers and commands */ | |
| #define REG 0x2e /* The register to read/write */ | |
| #define VAL 0x2f /* The value to read/write */ | |
| static inline void superio_outb(int reg, int val) | |
| { | |
| outb(reg, REG); | |
| outb(val, VAL); | |
| } | |
| static inline int superio_inb(int reg) | |
| { | |
| outb(reg, REG); | |
| return inb(VAL); | |
| } | |
| /* select superio logical device */ | |
| static inline void superio_select(int ld) | |
| { | |
| superio_outb(0x07, ld); | |
| } | |
| static inline void superio_enter(void) | |
| { | |
| outb(0x55, REG); | |
| } | |
| static inline void superio_exit(void) | |
| { | |
| outb(0xAA, REG); | |
| } | |
| #define SUPERIO_REG_DEVID 0x20 | |
| #define SUPERIO_REG_DEVREV 0x21 | |
| #define SUPERIO_REG_BASE_MSB 0x60 | |
| #define SUPERIO_REG_BASE_LSB 0x61 | |
| #define SUPERIO_REG_LD8 0x08 | |
| #define SMSC_EXTENT 0x02 | |
| /* 0 <= nr <= 3 */ | |
| static u8 smsc47b397_reg_temp[] = {0x25, 0x26, 0x27, 0x80}; | |
| #define SMSC47B397_REG_TEMP(nr) (smsc47b397_reg_temp[(nr)]) | |
| /* 0 <= nr <= 3 */ | |
| #define SMSC47B397_REG_FAN_LSB(nr) (0x28 + 2 * (nr)) | |
| #define SMSC47B397_REG_FAN_MSB(nr) (0x29 + 2 * (nr)) | |
| struct smsc47b397_data { | |
| unsigned short addr; | |
| struct mutex lock; | |
| struct mutex update_lock; | |
| unsigned long last_updated; /* in jiffies */ | |
| int valid; | |
| /* register values */ | |
| u16 fan[4]; | |
| u8 temp[4]; | |
| }; | |
| static int smsc47b397_read_value(struct smsc47b397_data *data, u8 reg) | |
| { | |
| int res; | |
| mutex_lock(&data->lock); | |
| outb(reg, data->addr); | |
| res = inb_p(data->addr + 1); | |
| mutex_unlock(&data->lock); | |
| return res; | |
| } | |
| static struct smsc47b397_data *smsc47b397_update_device(struct device *dev) | |
| { | |
| struct smsc47b397_data *data = dev_get_drvdata(dev); | |
| int i; | |
| mutex_lock(&data->update_lock); | |
| if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { | |
| dev_dbg(dev, "starting device update...\n"); | |
| /* 4 temperature inputs, 4 fan inputs */ | |
| for (i = 0; i < 4; i++) { | |
| data->temp[i] = smsc47b397_read_value(data, | |
| SMSC47B397_REG_TEMP(i)); | |
| /* must read LSB first */ | |
| data->fan[i] = smsc47b397_read_value(data, | |
| SMSC47B397_REG_FAN_LSB(i)); | |
| data->fan[i] |= smsc47b397_read_value(data, | |
| SMSC47B397_REG_FAN_MSB(i)) << 8; | |
| } | |
| data->last_updated = jiffies; | |
| data->valid = 1; | |
| dev_dbg(dev, "... device update complete\n"); | |
| } | |
| mutex_unlock(&data->update_lock); | |
| return data; | |
| } | |
| /* | |
| * TEMP: 0.001C/bit (-128C to +127C) | |
| * REG: 1C/bit, two's complement | |
| */ | |
| static int temp_from_reg(u8 reg) | |
| { | |
| return (s8)reg * 1000; | |
| } | |
| static ssize_t show_temp(struct device *dev, struct device_attribute | |
| *devattr, char *buf) | |
| { | |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | |
| struct smsc47b397_data *data = smsc47b397_update_device(dev); | |
| return sprintf(buf, "%d\n", temp_from_reg(data->temp[attr->index])); | |
| } | |
| static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); | |
| static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1); | |
| static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2); | |
| static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3); | |
| /* | |
| * FAN: 1 RPM/bit | |
| * REG: count of 90kHz pulses / revolution | |
| */ | |
| static int fan_from_reg(u16 reg) | |
| { | |
| if (reg == 0 || reg == 0xffff) | |
| return 0; | |
| return 90000 * 60 / reg; | |
| } | |
| static ssize_t show_fan(struct device *dev, struct device_attribute | |
| *devattr, char *buf) | |
| { | |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | |
| struct smsc47b397_data *data = smsc47b397_update_device(dev); | |
| return sprintf(buf, "%d\n", fan_from_reg(data->fan[attr->index])); | |
| } | |
| static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); | |
| static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1); | |
| static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2); | |
| static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3); | |
| static struct attribute *smsc47b397_attrs[] = { | |
| &sensor_dev_attr_temp1_input.dev_attr.attr, | |
| &sensor_dev_attr_temp2_input.dev_attr.attr, | |
| &sensor_dev_attr_temp3_input.dev_attr.attr, | |
| &sensor_dev_attr_temp4_input.dev_attr.attr, | |
| &sensor_dev_attr_fan1_input.dev_attr.attr, | |
| &sensor_dev_attr_fan2_input.dev_attr.attr, | |
| &sensor_dev_attr_fan3_input.dev_attr.attr, | |
| &sensor_dev_attr_fan4_input.dev_attr.attr, | |
| NULL | |
| }; | |
| ATTRIBUTE_GROUPS(smsc47b397); | |
| static int smsc47b397_probe(struct platform_device *pdev); | |
| static struct platform_driver smsc47b397_driver = { | |
| .driver = { | |
| .name = DRVNAME, | |
| }, | |
| .probe = smsc47b397_probe, | |
| }; | |
| static int smsc47b397_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct smsc47b397_data *data; | |
| struct device *hwmon_dev; | |
| struct resource *res; | |
| res = platform_get_resource(pdev, IORESOURCE_IO, 0); | |
| if (!devm_request_region(dev, res->start, SMSC_EXTENT, | |
| smsc47b397_driver.driver.name)) { | |
| dev_err(dev, "Region 0x%lx-0x%lx already in use!\n", | |
| (unsigned long)res->start, | |
| (unsigned long)res->start + SMSC_EXTENT - 1); | |
| return -EBUSY; | |
| } | |
| data = devm_kzalloc(dev, sizeof(struct smsc47b397_data), GFP_KERNEL); | |
| if (!data) | |
| return -ENOMEM; | |
| data->addr = res->start; | |
| mutex_init(&data->lock); | |
| mutex_init(&data->update_lock); | |
| hwmon_dev = devm_hwmon_device_register_with_groups(dev, "smsc47b397", | |
| data, | |
| smsc47b397_groups); | |
| return PTR_ERR_OR_ZERO(hwmon_dev); | |
| } | |
| static int __init smsc47b397_device_add(unsigned short address) | |
| { | |
| struct resource res = { | |
| .start = address, | |
| .end = address + SMSC_EXTENT - 1, | |
| .name = DRVNAME, | |
| .flags = IORESOURCE_IO, | |
| }; | |
| int err; | |
| err = acpi_check_resource_conflict(&res); | |
| if (err) | |
| goto exit; | |
| pdev = platform_device_alloc(DRVNAME, address); | |
| if (!pdev) { | |
| err = -ENOMEM; | |
| pr_err("Device allocation failed\n"); | |
| goto exit; | |
| } | |
| err = platform_device_add_resources(pdev, &res, 1); | |
| if (err) { | |
| pr_err("Device resource addition failed (%d)\n", err); | |
| goto exit_device_put; | |
| } | |
| err = platform_device_add(pdev); | |
| if (err) { | |
| pr_err("Device addition failed (%d)\n", err); | |
| goto exit_device_put; | |
| } | |
| return 0; | |
| exit_device_put: | |
| platform_device_put(pdev); | |
| exit: | |
| return err; | |
| } | |
| static int __init smsc47b397_find(void) | |
| { | |
| u8 id, rev; | |
| char *name; | |
| unsigned short addr; | |
| superio_enter(); | |
| id = force_id ? force_id : superio_inb(SUPERIO_REG_DEVID); | |
| switch (id) { | |
| case 0x81: | |
| name = "SCH5307-NS"; | |
| break; | |
| case 0x6f: | |
| name = "LPC47B397-NC"; | |
| break; | |
| case 0x85: | |
| case 0x8c: | |
| name = "SCH5317"; | |
| break; | |
| default: | |
| superio_exit(); | |
| return -ENODEV; | |
| } | |
| rev = superio_inb(SUPERIO_REG_DEVREV); | |
| superio_select(SUPERIO_REG_LD8); | |
| addr = (superio_inb(SUPERIO_REG_BASE_MSB) << 8) | |
| | superio_inb(SUPERIO_REG_BASE_LSB); | |
| pr_info("found SMSC %s (base address 0x%04x, revision %u)\n", | |
| name, addr, rev); | |
| superio_exit(); | |
| return addr; | |
| } | |
| static int __init smsc47b397_init(void) | |
| { | |
| unsigned short address; | |
| int ret; | |
| ret = smsc47b397_find(); | |
| if (ret < 0) | |
| return ret; | |
| address = ret; | |
| ret = platform_driver_register(&smsc47b397_driver); | |
| if (ret) | |
| goto exit; | |
| /* Sets global pdev as a side effect */ | |
| ret = smsc47b397_device_add(address); | |
| if (ret) | |
| goto exit_driver; | |
| return 0; | |
| exit_driver: | |
| platform_driver_unregister(&smsc47b397_driver); | |
| exit: | |
| return ret; | |
| } | |
| static void __exit smsc47b397_exit(void) | |
| { | |
| platform_device_unregister(pdev); | |
| platform_driver_unregister(&smsc47b397_driver); | |
| } | |
| MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>"); | |
| MODULE_DESCRIPTION("SMSC LPC47B397 driver"); | |
| MODULE_LICENSE("GPL"); | |
| module_init(smsc47b397_init); | |
| module_exit(smsc47b397_exit); |