| /* | |
| * (C) Copyright 2003-2004 | |
| * Humboldt Solutions Ltd, adrian@humboldt.co.uk. | |
| * This is a combined i2c adapter and algorithm driver for the | |
| * MPC107/Tsi107 PowerPC northbridge and processors that include | |
| * the same I2C unit (8240, 8245, 85xx). | |
| * | |
| * Release 0.8 | |
| * | |
| * This file is licensed under the terms of the GNU General Public | |
| * License version 2. This program is licensed "as is" without any | |
| * warranty of any kind, whether express or implied. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/sched.h> | |
| #include <linux/of_address.h> | |
| #include <linux/of_irq.h> | |
| #include <linux/of_platform.h> | |
| #include <linux/slab.h> | |
| #include <linux/clk.h> | |
| #include <linux/io.h> | |
| #include <linux/fsl_devices.h> | |
| #include <linux/i2c.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/delay.h> | |
| #include <asm/mpc52xx.h> | |
| #include <asm/mpc85xx.h> | |
| #include <sysdev/fsl_soc.h> | |
| #define DRV_NAME "mpc-i2c" | |
| #define MPC_I2C_CLOCK_LEGACY 0 | |
| #define MPC_I2C_CLOCK_PRESERVE (~0U) | |
| #define MPC_I2C_FDR 0x04 | |
| #define MPC_I2C_CR 0x08 | |
| #define MPC_I2C_SR 0x0c | |
| #define MPC_I2C_DR 0x10 | |
| #define MPC_I2C_DFSRR 0x14 | |
| #define CCR_MEN 0x80 | |
| #define CCR_MIEN 0x40 | |
| #define CCR_MSTA 0x20 | |
| #define CCR_MTX 0x10 | |
| #define CCR_TXAK 0x08 | |
| #define CCR_RSTA 0x04 | |
| #define CSR_MCF 0x80 | |
| #define CSR_MAAS 0x40 | |
| #define CSR_MBB 0x20 | |
| #define CSR_MAL 0x10 | |
| #define CSR_SRW 0x04 | |
| #define CSR_MIF 0x02 | |
| #define CSR_RXAK 0x01 | |
| struct mpc_i2c { | |
| struct device *dev; | |
| void __iomem *base; | |
| u32 interrupt; | |
| wait_queue_head_t queue; | |
| struct i2c_adapter adap; | |
| int irq; | |
| u32 real_clk; | |
| #ifdef CONFIG_PM_SLEEP | |
| u8 fdr, dfsrr; | |
| #endif | |
| struct clk *clk_per; | |
| }; | |
| struct mpc_i2c_divider { | |
| u16 divider; | |
| u16 fdr; /* including dfsrr */ | |
| }; | |
| struct mpc_i2c_data { | |
| void (*setup)(struct device_node *node, struct mpc_i2c *i2c, | |
| u32 clock, u32 prescaler); | |
| u32 prescaler; | |
| }; | |
| static inline void writeccr(struct mpc_i2c *i2c, u32 x) | |
| { | |
| writeb(x, i2c->base + MPC_I2C_CR); | |
| } | |
| static irqreturn_t mpc_i2c_isr(int irq, void *dev_id) | |
| { | |
| struct mpc_i2c *i2c = dev_id; | |
| if (readb(i2c->base + MPC_I2C_SR) & CSR_MIF) { | |
| /* Read again to allow register to stabilise */ | |
| i2c->interrupt = readb(i2c->base + MPC_I2C_SR); | |
| writeb(0, i2c->base + MPC_I2C_SR); | |
| wake_up(&i2c->queue); | |
| return IRQ_HANDLED; | |
| } | |
| return IRQ_NONE; | |
| } | |
| /* Sometimes 9th clock pulse isn't generated, and slave doesn't release | |
| * the bus, because it wants to send ACK. | |
| * Following sequence of enabling/disabling and sending start/stop generates | |
| * the 9 pulses, so it's all OK. | |
| */ | |
| static void mpc_i2c_fixup(struct mpc_i2c *i2c) | |
| { | |
| int k; | |
| u32 delay_val = 1000000 / i2c->real_clk + 1; | |
| if (delay_val < 2) | |
| delay_val = 2; | |
| for (k = 9; k; k--) { | |
| writeccr(i2c, 0); | |
| writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN); | |
| readb(i2c->base + MPC_I2C_DR); | |
| writeccr(i2c, CCR_MEN); | |
| udelay(delay_val << 1); | |
| } | |
| } | |
| static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing) | |
| { | |
| unsigned long orig_jiffies = jiffies; | |
| u32 cmd_err; | |
| int result = 0; | |
| if (!i2c->irq) { | |
| while (!(readb(i2c->base + MPC_I2C_SR) & CSR_MIF)) { | |
| schedule(); | |
| if (time_after(jiffies, orig_jiffies + timeout)) { | |
| dev_dbg(i2c->dev, "timeout\n"); | |
| writeccr(i2c, 0); | |
| result = -ETIMEDOUT; | |
| break; | |
| } | |
| } | |
| cmd_err = readb(i2c->base + MPC_I2C_SR); | |
| writeb(0, i2c->base + MPC_I2C_SR); | |
| } else { | |
| /* Interrupt mode */ | |
| result = wait_event_timeout(i2c->queue, | |
| (i2c->interrupt & CSR_MIF), timeout); | |
| if (unlikely(!(i2c->interrupt & CSR_MIF))) { | |
| dev_dbg(i2c->dev, "wait timeout\n"); | |
| writeccr(i2c, 0); | |
| result = -ETIMEDOUT; | |
| } | |
| cmd_err = i2c->interrupt; | |
| i2c->interrupt = 0; | |
| } | |
| if (result < 0) | |
| return result; | |
| if (!(cmd_err & CSR_MCF)) { | |
| dev_dbg(i2c->dev, "unfinished\n"); | |
| return -EIO; | |
| } | |
| if (cmd_err & CSR_MAL) { | |
| dev_dbg(i2c->dev, "MAL\n"); | |
| return -EAGAIN; | |
| } | |
| if (writing && (cmd_err & CSR_RXAK)) { | |
| dev_dbg(i2c->dev, "No RXAK\n"); | |
| /* generate stop */ | |
| writeccr(i2c, CCR_MEN); | |
| return -ENXIO; | |
| } | |
| return 0; | |
| } | |
| #if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x) | |
| static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = { | |
| {20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23}, | |
| {28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02}, | |
| {36, 0x26}, {40, 0x27}, {44, 0x04}, {48, 0x28}, | |
| {52, 0x63}, {56, 0x29}, {60, 0x41}, {64, 0x2a}, | |
| {68, 0x07}, {72, 0x2b}, {80, 0x2c}, {88, 0x09}, | |
| {96, 0x2d}, {104, 0x0a}, {112, 0x2e}, {120, 0x81}, | |
| {128, 0x2f}, {136, 0x47}, {144, 0x0c}, {160, 0x30}, | |
| {176, 0x49}, {192, 0x31}, {208, 0x4a}, {224, 0x32}, | |
| {240, 0x0f}, {256, 0x33}, {272, 0x87}, {288, 0x10}, | |
| {320, 0x34}, {352, 0x89}, {384, 0x35}, {416, 0x8a}, | |
| {448, 0x36}, {480, 0x13}, {512, 0x37}, {576, 0x14}, | |
| {640, 0x38}, {768, 0x39}, {896, 0x3a}, {960, 0x17}, | |
| {1024, 0x3b}, {1152, 0x18}, {1280, 0x3c}, {1536, 0x3d}, | |
| {1792, 0x3e}, {1920, 0x1b}, {2048, 0x3f}, {2304, 0x1c}, | |
| {2560, 0x1d}, {3072, 0x1e}, {3584, 0x7e}, {3840, 0x1f}, | |
| {4096, 0x7f}, {4608, 0x5c}, {5120, 0x5d}, {6144, 0x5e}, | |
| {7168, 0xbe}, {7680, 0x5f}, {8192, 0xbf}, {9216, 0x9c}, | |
| {10240, 0x9d}, {12288, 0x9e}, {15360, 0x9f} | |
| }; | |
| static int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, | |
| int prescaler, u32 *real_clk) | |
| { | |
| const struct mpc_i2c_divider *div = NULL; | |
| unsigned int pvr = mfspr(SPRN_PVR); | |
| u32 divider; | |
| int i; | |
| if (clock == MPC_I2C_CLOCK_LEGACY) { | |
| /* see below - default fdr = 0x3f -> div = 2048 */ | |
| *real_clk = mpc5xxx_get_bus_frequency(node) / 2048; | |
| return -EINVAL; | |
| } | |
| /* Determine divider value */ | |
| divider = mpc5xxx_get_bus_frequency(node) / clock; | |
| /* | |
| * We want to choose an FDR/DFSR that generates an I2C bus speed that | |
| * is equal to or lower than the requested speed. | |
| */ | |
| for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_52xx); i++) { | |
| div = &mpc_i2c_dividers_52xx[i]; | |
| /* Old MPC5200 rev A CPUs do not support the high bits */ | |
| if (div->fdr & 0xc0 && pvr == 0x80822011) | |
| continue; | |
| if (div->divider >= divider) | |
| break; | |
| } | |
| *real_clk = mpc5xxx_get_bus_frequency(node) / div->divider; | |
| return (int)div->fdr; | |
| } | |
| static void mpc_i2c_setup_52xx(struct device_node *node, | |
| struct mpc_i2c *i2c, | |
| u32 clock, u32 prescaler) | |
| { | |
| int ret, fdr; | |
| if (clock == MPC_I2C_CLOCK_PRESERVE) { | |
| dev_dbg(i2c->dev, "using fdr %d\n", | |
| readb(i2c->base + MPC_I2C_FDR)); | |
| return; | |
| } | |
| ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler, &i2c->real_clk); | |
| fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */ | |
| writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR); | |
| if (ret >= 0) | |
| dev_info(i2c->dev, "clock %u Hz (fdr=%d)\n", i2c->real_clk, | |
| fdr); | |
| } | |
| #else /* !(CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x) */ | |
| static void mpc_i2c_setup_52xx(struct device_node *node, | |
| struct mpc_i2c *i2c, | |
| u32 clock, u32 prescaler) | |
| { | |
| } | |
| #endif /* CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x */ | |
| #ifdef CONFIG_PPC_MPC512x | |
| static void mpc_i2c_setup_512x(struct device_node *node, | |
| struct mpc_i2c *i2c, | |
| u32 clock, u32 prescaler) | |
| { | |
| struct device_node *node_ctrl; | |
| void __iomem *ctrl; | |
| const u32 *pval; | |
| u32 idx; | |
| /* Enable I2C interrupts for mpc5121 */ | |
| node_ctrl = of_find_compatible_node(NULL, NULL, | |
| "fsl,mpc5121-i2c-ctrl"); | |
| if (node_ctrl) { | |
| ctrl = of_iomap(node_ctrl, 0); | |
| if (ctrl) { | |
| /* Interrupt enable bits for i2c-0/1/2: bit 24/26/28 */ | |
| pval = of_get_property(node, "reg", NULL); | |
| idx = (*pval & 0xff) / 0x20; | |
| setbits32(ctrl, 1 << (24 + idx * 2)); | |
| iounmap(ctrl); | |
| } | |
| of_node_put(node_ctrl); | |
| } | |
| /* The clock setup for the 52xx works also fine for the 512x */ | |
| mpc_i2c_setup_52xx(node, i2c, clock, prescaler); | |
| } | |
| #else /* CONFIG_PPC_MPC512x */ | |
| static void mpc_i2c_setup_512x(struct device_node *node, | |
| struct mpc_i2c *i2c, | |
| u32 clock, u32 prescaler) | |
| { | |
| } | |
| #endif /* CONFIG_PPC_MPC512x */ | |
| #ifdef CONFIG_FSL_SOC | |
| static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = { | |
| {160, 0x0120}, {192, 0x0121}, {224, 0x0122}, {256, 0x0123}, | |
| {288, 0x0100}, {320, 0x0101}, {352, 0x0601}, {384, 0x0102}, | |
| {416, 0x0602}, {448, 0x0126}, {480, 0x0103}, {512, 0x0127}, | |
| {544, 0x0b03}, {576, 0x0104}, {608, 0x1603}, {640, 0x0105}, | |
| {672, 0x2003}, {704, 0x0b05}, {736, 0x2b03}, {768, 0x0106}, | |
| {800, 0x3603}, {832, 0x0b06}, {896, 0x012a}, {960, 0x0107}, | |
| {1024, 0x012b}, {1088, 0x1607}, {1152, 0x0108}, {1216, 0x2b07}, | |
| {1280, 0x0109}, {1408, 0x1609}, {1536, 0x010a}, {1664, 0x160a}, | |
| {1792, 0x012e}, {1920, 0x010b}, {2048, 0x012f}, {2176, 0x2b0b}, | |
| {2304, 0x010c}, {2560, 0x010d}, {2816, 0x2b0d}, {3072, 0x010e}, | |
| {3328, 0x2b0e}, {3584, 0x0132}, {3840, 0x010f}, {4096, 0x0133}, | |
| {4608, 0x0110}, {5120, 0x0111}, {6144, 0x0112}, {7168, 0x0136}, | |
| {7680, 0x0113}, {8192, 0x0137}, {9216, 0x0114}, {10240, 0x0115}, | |
| {12288, 0x0116}, {14336, 0x013a}, {15360, 0x0117}, {16384, 0x013b}, | |
| {18432, 0x0118}, {20480, 0x0119}, {24576, 0x011a}, {28672, 0x013e}, | |
| {30720, 0x011b}, {32768, 0x013f}, {36864, 0x011c}, {40960, 0x011d}, | |
| {49152, 0x011e}, {61440, 0x011f} | |
| }; | |
| static u32 mpc_i2c_get_sec_cfg_8xxx(void) | |
| { | |
| struct device_node *node = NULL; | |
| u32 __iomem *reg; | |
| u32 val = 0; | |
| node = of_find_node_by_name(NULL, "global-utilities"); | |
| if (node) { | |
| const u32 *prop = of_get_property(node, "reg", NULL); | |
| if (prop) { | |
| /* | |
| * Map and check POR Device Status Register 2 | |
| * (PORDEVSR2) at 0xE0014 | |
| */ | |
| reg = ioremap(get_immrbase() + *prop + 0x14, 0x4); | |
| if (!reg) | |
| printk(KERN_ERR | |
| "Error: couldn't map PORDEVSR2\n"); | |
| else | |
| val = in_be32(reg) & 0x00000080; /* sec-cfg */ | |
| iounmap(reg); | |
| } | |
| } | |
| of_node_put(node); | |
| return val; | |
| } | |
| static u32 mpc_i2c_get_prescaler_8xxx(void) | |
| { | |
| /* mpc83xx and mpc82xx all have prescaler 1 */ | |
| u32 prescaler = 1; | |
| /* mpc85xx */ | |
| if (pvr_version_is(PVR_VER_E500V1) || pvr_version_is(PVR_VER_E500V2) | |
| || pvr_version_is(PVR_VER_E500MC) | |
| || pvr_version_is(PVR_VER_E5500) | |
| || pvr_version_is(PVR_VER_E6500)) { | |
| unsigned int svr = mfspr(SPRN_SVR); | |
| if ((SVR_SOC_VER(svr) == SVR_8540) | |
| || (SVR_SOC_VER(svr) == SVR_8541) | |
| || (SVR_SOC_VER(svr) == SVR_8560) | |
| || (SVR_SOC_VER(svr) == SVR_8555) | |
| || (SVR_SOC_VER(svr) == SVR_8610)) | |
| /* the above 85xx SoCs have prescaler 1 */ | |
| prescaler = 1; | |
| else | |
| /* all the other 85xx have prescaler 2 */ | |
| prescaler = 2; | |
| } | |
| return prescaler; | |
| } | |
| static int mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock, | |
| u32 prescaler, u32 *real_clk) | |
| { | |
| const struct mpc_i2c_divider *div = NULL; | |
| u32 divider; | |
| int i; | |
| if (clock == MPC_I2C_CLOCK_LEGACY) { | |
| /* see below - default fdr = 0x1031 -> div = 16 * 3072 */ | |
| *real_clk = fsl_get_sys_freq() / prescaler / (16 * 3072); | |
| return -EINVAL; | |
| } | |
| /* Determine proper divider value */ | |
| if (of_device_is_compatible(node, "fsl,mpc8544-i2c")) | |
| prescaler = mpc_i2c_get_sec_cfg_8xxx() ? 3 : 2; | |
| if (!prescaler) | |
| prescaler = mpc_i2c_get_prescaler_8xxx(); | |
| divider = fsl_get_sys_freq() / clock / prescaler; | |
| pr_debug("I2C: src_clock=%d clock=%d divider=%d\n", | |
| fsl_get_sys_freq(), clock, divider); | |
| /* | |
| * We want to choose an FDR/DFSR that generates an I2C bus speed that | |
| * is equal to or lower than the requested speed. | |
| */ | |
| for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_8xxx); i++) { | |
| div = &mpc_i2c_dividers_8xxx[i]; | |
| if (div->divider >= divider) | |
| break; | |
| } | |
| *real_clk = fsl_get_sys_freq() / prescaler / div->divider; | |
| return div ? (int)div->fdr : -EINVAL; | |
| } | |
| static void mpc_i2c_setup_8xxx(struct device_node *node, | |
| struct mpc_i2c *i2c, | |
| u32 clock, u32 prescaler) | |
| { | |
| int ret, fdr; | |
| if (clock == MPC_I2C_CLOCK_PRESERVE) { | |
| dev_dbg(i2c->dev, "using dfsrr %d, fdr %d\n", | |
| readb(i2c->base + MPC_I2C_DFSRR), | |
| readb(i2c->base + MPC_I2C_FDR)); | |
| return; | |
| } | |
| ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler, &i2c->real_clk); | |
| fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */ | |
| writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR); | |
| writeb((fdr >> 8) & 0xff, i2c->base + MPC_I2C_DFSRR); | |
| if (ret >= 0) | |
| dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n", | |
| i2c->real_clk, fdr >> 8, fdr & 0xff); | |
| } | |
| #else /* !CONFIG_FSL_SOC */ | |
| static void mpc_i2c_setup_8xxx(struct device_node *node, | |
| struct mpc_i2c *i2c, | |
| u32 clock, u32 prescaler) | |
| { | |
| } | |
| #endif /* CONFIG_FSL_SOC */ | |
| static void mpc_i2c_start(struct mpc_i2c *i2c) | |
| { | |
| /* Clear arbitration */ | |
| writeb(0, i2c->base + MPC_I2C_SR); | |
| /* Start with MEN */ | |
| writeccr(i2c, CCR_MEN); | |
| } | |
| static void mpc_i2c_stop(struct mpc_i2c *i2c) | |
| { | |
| writeccr(i2c, CCR_MEN); | |
| } | |
| static int mpc_write(struct mpc_i2c *i2c, int target, | |
| const u8 *data, int length, int restart) | |
| { | |
| int i, result; | |
| unsigned timeout = i2c->adap.timeout; | |
| u32 flags = restart ? CCR_RSTA : 0; | |
| /* Start as master */ | |
| writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags); | |
| /* Write target byte */ | |
| writeb((target << 1), i2c->base + MPC_I2C_DR); | |
| result = i2c_wait(i2c, timeout, 1); | |
| if (result < 0) | |
| return result; | |
| for (i = 0; i < length; i++) { | |
| /* Write data byte */ | |
| writeb(data[i], i2c->base + MPC_I2C_DR); | |
| result = i2c_wait(i2c, timeout, 1); | |
| if (result < 0) | |
| return result; | |
| } | |
| return 0; | |
| } | |
| static int mpc_read(struct mpc_i2c *i2c, int target, | |
| u8 *data, int length, int restart, bool recv_len) | |
| { | |
| unsigned timeout = i2c->adap.timeout; | |
| int i, result; | |
| u32 flags = restart ? CCR_RSTA : 0; | |
| /* Switch to read - restart */ | |
| writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags); | |
| /* Write target address byte - this time with the read flag set */ | |
| writeb((target << 1) | 1, i2c->base + MPC_I2C_DR); | |
| result = i2c_wait(i2c, timeout, 1); | |
| if (result < 0) | |
| return result; | |
| if (length) { | |
| if (length == 1 && !recv_len) | |
| writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK); | |
| else | |
| writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA); | |
| /* Dummy read */ | |
| readb(i2c->base + MPC_I2C_DR); | |
| } | |
| for (i = 0; i < length; i++) { | |
| u8 byte; | |
| result = i2c_wait(i2c, timeout, 0); | |
| if (result < 0) | |
| return result; | |
| /* | |
| * For block reads, we have to know the total length (1st byte) | |
| * before we can determine if we are done. | |
| */ | |
| if (i || !recv_len) { | |
| /* Generate txack on next to last byte */ | |
| if (i == length - 2) | |
| writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | |
| | CCR_TXAK); | |
| /* Do not generate stop on last byte */ | |
| if (i == length - 1) | |
| writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | |
| | CCR_MTX); | |
| } | |
| byte = readb(i2c->base + MPC_I2C_DR); | |
| /* | |
| * Adjust length if first received byte is length. | |
| * The length is 1 length byte plus actually data length | |
| */ | |
| if (i == 0 && recv_len) { | |
| if (byte == 0 || byte > I2C_SMBUS_BLOCK_MAX) | |
| return -EPROTO; | |
| length += byte; | |
| /* | |
| * For block reads, generate txack here if data length | |
| * is 1 byte (total length is 2 bytes). | |
| */ | |
| if (length == 2) | |
| writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | |
| | CCR_TXAK); | |
| } | |
| data[i] = byte; | |
| } | |
| return length; | |
| } | |
| static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) | |
| { | |
| struct i2c_msg *pmsg; | |
| int i; | |
| int ret = 0; | |
| unsigned long orig_jiffies = jiffies; | |
| struct mpc_i2c *i2c = i2c_get_adapdata(adap); | |
| mpc_i2c_start(i2c); | |
| /* Allow bus up to 1s to become not busy */ | |
| while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) { | |
| if (signal_pending(current)) { | |
| dev_dbg(i2c->dev, "Interrupted\n"); | |
| writeccr(i2c, 0); | |
| return -EINTR; | |
| } | |
| if (time_after(jiffies, orig_jiffies + HZ)) { | |
| u8 status = readb(i2c->base + MPC_I2C_SR); | |
| dev_dbg(i2c->dev, "timeout\n"); | |
| if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) { | |
| writeb(status & ~CSR_MAL, | |
| i2c->base + MPC_I2C_SR); | |
| mpc_i2c_fixup(i2c); | |
| } | |
| return -EIO; | |
| } | |
| schedule(); | |
| } | |
| for (i = 0; ret >= 0 && i < num; i++) { | |
| pmsg = &msgs[i]; | |
| dev_dbg(i2c->dev, | |
| "Doing %s %d bytes to 0x%02x - %d of %d messages\n", | |
| pmsg->flags & I2C_M_RD ? "read" : "write", | |
| pmsg->len, pmsg->addr, i + 1, num); | |
| if (pmsg->flags & I2C_M_RD) { | |
| bool recv_len = pmsg->flags & I2C_M_RECV_LEN; | |
| ret = mpc_read(i2c, pmsg->addr, pmsg->buf, pmsg->len, i, | |
| recv_len); | |
| if (recv_len && ret > 0) | |
| pmsg->len = ret; | |
| } else { | |
| ret = | |
| mpc_write(i2c, pmsg->addr, pmsg->buf, pmsg->len, i); | |
| } | |
| } | |
| mpc_i2c_stop(i2c); /* Initiate STOP */ | |
| orig_jiffies = jiffies; | |
| /* Wait until STOP is seen, allow up to 1 s */ | |
| while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) { | |
| if (time_after(jiffies, orig_jiffies + HZ)) { | |
| u8 status = readb(i2c->base + MPC_I2C_SR); | |
| dev_dbg(i2c->dev, "timeout\n"); | |
| if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) { | |
| writeb(status & ~CSR_MAL, | |
| i2c->base + MPC_I2C_SR); | |
| mpc_i2c_fixup(i2c); | |
| } | |
| return -EIO; | |
| } | |
| cond_resched(); | |
| } | |
| return (ret < 0) ? ret : num; | |
| } | |
| static u32 mpc_functionality(struct i2c_adapter *adap) | |
| { | |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | |
| | I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL; | |
| } | |
| static const struct i2c_algorithm mpc_algo = { | |
| .master_xfer = mpc_xfer, | |
| .functionality = mpc_functionality, | |
| }; | |
| static struct i2c_adapter mpc_ops = { | |
| .owner = THIS_MODULE, | |
| .algo = &mpc_algo, | |
| .timeout = HZ, | |
| }; | |
| static const struct of_device_id mpc_i2c_of_match[]; | |
| static int fsl_i2c_probe(struct platform_device *op) | |
| { | |
| const struct of_device_id *match; | |
| struct mpc_i2c *i2c; | |
| const u32 *prop; | |
| u32 clock = MPC_I2C_CLOCK_LEGACY; | |
| int result = 0; | |
| int plen; | |
| struct resource res; | |
| struct clk *clk; | |
| int err; | |
| match = of_match_device(mpc_i2c_of_match, &op->dev); | |
| if (!match) | |
| return -EINVAL; | |
| i2c = kzalloc(sizeof(*i2c), GFP_KERNEL); | |
| if (!i2c) | |
| return -ENOMEM; | |
| i2c->dev = &op->dev; /* for debug and error output */ | |
| init_waitqueue_head(&i2c->queue); | |
| i2c->base = of_iomap(op->dev.of_node, 0); | |
| if (!i2c->base) { | |
| dev_err(i2c->dev, "failed to map controller\n"); | |
| result = -ENOMEM; | |
| goto fail_map; | |
| } | |
| i2c->irq = irq_of_parse_and_map(op->dev.of_node, 0); | |
| if (i2c->irq) { /* no i2c->irq implies polling */ | |
| result = request_irq(i2c->irq, mpc_i2c_isr, | |
| IRQF_SHARED, "i2c-mpc", i2c); | |
| if (result < 0) { | |
| dev_err(i2c->dev, "failed to attach interrupt\n"); | |
| goto fail_request; | |
| } | |
| } | |
| /* | |
| * enable clock for the I2C peripheral (non fatal), | |
| * keep a reference upon successful allocation | |
| */ | |
| clk = devm_clk_get(&op->dev, NULL); | |
| if (!IS_ERR(clk)) { | |
| err = clk_prepare_enable(clk); | |
| if (err) { | |
| dev_err(&op->dev, "failed to enable clock\n"); | |
| goto fail_request; | |
| } else { | |
| i2c->clk_per = clk; | |
| } | |
| } | |
| if (of_get_property(op->dev.of_node, "fsl,preserve-clocking", NULL)) { | |
| clock = MPC_I2C_CLOCK_PRESERVE; | |
| } else { | |
| prop = of_get_property(op->dev.of_node, "clock-frequency", | |
| &plen); | |
| if (prop && plen == sizeof(u32)) | |
| clock = *prop; | |
| } | |
| if (match->data) { | |
| const struct mpc_i2c_data *data = match->data; | |
| data->setup(op->dev.of_node, i2c, clock, data->prescaler); | |
| } else { | |
| /* Backwards compatibility */ | |
| if (of_get_property(op->dev.of_node, "dfsrr", NULL)) | |
| mpc_i2c_setup_8xxx(op->dev.of_node, i2c, clock, 0); | |
| } | |
| prop = of_get_property(op->dev.of_node, "fsl,timeout", &plen); | |
| if (prop && plen == sizeof(u32)) { | |
| mpc_ops.timeout = *prop * HZ / 1000000; | |
| if (mpc_ops.timeout < 5) | |
| mpc_ops.timeout = 5; | |
| } | |
| dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ); | |
| platform_set_drvdata(op, i2c); | |
| i2c->adap = mpc_ops; | |
| of_address_to_resource(op->dev.of_node, 0, &res); | |
| scnprintf(i2c->adap.name, sizeof(i2c->adap.name), | |
| "MPC adapter at 0x%llx", (unsigned long long)res.start); | |
| i2c_set_adapdata(&i2c->adap, i2c); | |
| i2c->adap.dev.parent = &op->dev; | |
| i2c->adap.dev.of_node = of_node_get(op->dev.of_node); | |
| result = i2c_add_adapter(&i2c->adap); | |
| if (result < 0) | |
| goto fail_add; | |
| return result; | |
| fail_add: | |
| if (i2c->clk_per) | |
| clk_disable_unprepare(i2c->clk_per); | |
| free_irq(i2c->irq, i2c); | |
| fail_request: | |
| irq_dispose_mapping(i2c->irq); | |
| iounmap(i2c->base); | |
| fail_map: | |
| kfree(i2c); | |
| return result; | |
| }; | |
| static int fsl_i2c_remove(struct platform_device *op) | |
| { | |
| struct mpc_i2c *i2c = platform_get_drvdata(op); | |
| i2c_del_adapter(&i2c->adap); | |
| if (i2c->clk_per) | |
| clk_disable_unprepare(i2c->clk_per); | |
| if (i2c->irq) | |
| free_irq(i2c->irq, i2c); | |
| irq_dispose_mapping(i2c->irq); | |
| iounmap(i2c->base); | |
| kfree(i2c); | |
| return 0; | |
| }; | |
| #ifdef CONFIG_PM_SLEEP | |
| static int mpc_i2c_suspend(struct device *dev) | |
| { | |
| struct mpc_i2c *i2c = dev_get_drvdata(dev); | |
| i2c->fdr = readb(i2c->base + MPC_I2C_FDR); | |
| i2c->dfsrr = readb(i2c->base + MPC_I2C_DFSRR); | |
| return 0; | |
| } | |
| static int mpc_i2c_resume(struct device *dev) | |
| { | |
| struct mpc_i2c *i2c = dev_get_drvdata(dev); | |
| writeb(i2c->fdr, i2c->base + MPC_I2C_FDR); | |
| writeb(i2c->dfsrr, i2c->base + MPC_I2C_DFSRR); | |
| return 0; | |
| } | |
| static SIMPLE_DEV_PM_OPS(mpc_i2c_pm_ops, mpc_i2c_suspend, mpc_i2c_resume); | |
| #define MPC_I2C_PM_OPS (&mpc_i2c_pm_ops) | |
| #else | |
| #define MPC_I2C_PM_OPS NULL | |
| #endif | |
| static const struct mpc_i2c_data mpc_i2c_data_512x = { | |
| .setup = mpc_i2c_setup_512x, | |
| }; | |
| static const struct mpc_i2c_data mpc_i2c_data_52xx = { | |
| .setup = mpc_i2c_setup_52xx, | |
| }; | |
| static const struct mpc_i2c_data mpc_i2c_data_8313 = { | |
| .setup = mpc_i2c_setup_8xxx, | |
| }; | |
| static const struct mpc_i2c_data mpc_i2c_data_8543 = { | |
| .setup = mpc_i2c_setup_8xxx, | |
| .prescaler = 2, | |
| }; | |
| static const struct mpc_i2c_data mpc_i2c_data_8544 = { | |
| .setup = mpc_i2c_setup_8xxx, | |
| .prescaler = 3, | |
| }; | |
| static const struct of_device_id mpc_i2c_of_match[] = { | |
| {.compatible = "mpc5200-i2c", .data = &mpc_i2c_data_52xx, }, | |
| {.compatible = "fsl,mpc5200b-i2c", .data = &mpc_i2c_data_52xx, }, | |
| {.compatible = "fsl,mpc5200-i2c", .data = &mpc_i2c_data_52xx, }, | |
| {.compatible = "fsl,mpc5121-i2c", .data = &mpc_i2c_data_512x, }, | |
| {.compatible = "fsl,mpc8313-i2c", .data = &mpc_i2c_data_8313, }, | |
| {.compatible = "fsl,mpc8543-i2c", .data = &mpc_i2c_data_8543, }, | |
| {.compatible = "fsl,mpc8544-i2c", .data = &mpc_i2c_data_8544, }, | |
| /* Backward compatibility */ | |
| {.compatible = "fsl-i2c", }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, mpc_i2c_of_match); | |
| /* Structure for a device driver */ | |
| static struct platform_driver mpc_i2c_driver = { | |
| .probe = fsl_i2c_probe, | |
| .remove = fsl_i2c_remove, | |
| .driver = { | |
| .name = DRV_NAME, | |
| .of_match_table = mpc_i2c_of_match, | |
| .pm = MPC_I2C_PM_OPS, | |
| }, | |
| }; | |
| module_platform_driver(mpc_i2c_driver); | |
| MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>"); | |
| MODULE_DESCRIPTION("I2C-Bus adapter for MPC107 bridge and " | |
| "MPC824x/83xx/85xx/86xx/512x/52xx processors"); | |
| MODULE_LICENSE("GPL"); |