| # | |
| # Magnetometer sensors | |
| # | |
| # When adding new entries keep the list in alphabetical order | |
| menu "Magnetometer sensors" | |
| config AK8974 | |
| tristate "Asahi Kasei AK8974 3-Axis Magnetometer" | |
| depends on I2C | |
| depends on OF | |
| select REGMAP_I2C | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to build support for Asahi Kasei AK8974 or | |
| AMI305 I2C-based 3-axis magnetometer chips. | |
| To compile this driver as a module, choose M here: the module | |
| will be called ak8974. | |
| config AK8975 | |
| tristate "Asahi Kasei AK8975 3-Axis Magnetometer" | |
| depends on I2C | |
| depends on GPIOLIB || COMPILE_TEST | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to build support for Asahi Kasei AK8975, AK8963, | |
| AK09911 or AK09912 3-Axis Magnetometer. | |
| To compile this driver as a module, choose M here: the module | |
| will be called ak8975. | |
| config AK09911 | |
| tristate "Asahi Kasei AK09911 3-axis Compass" | |
| depends on I2C | |
| depends on GPIOLIB || COMPILE_TEST | |
| select AK8975 | |
| help | |
| Deprecated: AK09911 is now supported by AK8975 driver. | |
| config BMC150_MAGN | |
| tristate | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| config BMC150_MAGN_I2C | |
| tristate "Bosch BMC150 I2C Magnetometer Driver" | |
| depends on I2C | |
| select BMC150_MAGN | |
| select REGMAP_I2C | |
| help | |
| Say yes here to build support for the BMC150 magnetometer with | |
| I2C interface. | |
| This is a combo module with both accelerometer and magnetometer. | |
| This driver is only implementing magnetometer part, which has | |
| its own address and register map. | |
| This driver also supports I2C Bosch BMC156 and BMM150 chips. | |
| To compile this driver as a module, choose M here: the module will be | |
| called bmc150_magn_i2c. | |
| config BMC150_MAGN_SPI | |
| tristate "Bosch BMC150 SPI Magnetometer Driver" | |
| depends on SPI | |
| select BMC150_MAGN | |
| select REGMAP_SPI | |
| help | |
| Say yes here to build support for the BMC150 magnetometer with | |
| SPI interface. | |
| This is a combo module with both accelerometer and magnetometer. | |
| This driver is only implementing magnetometer part, which has | |
| its own address and register map. | |
| This driver also supports SPI Bosch BMC156 and BMM150 chips. | |
| To compile this driver as a module, choose M here: the module will be | |
| called bmc150_magn_spi. | |
| config MAG3110 | |
| tristate "Freescale MAG3110 3-Axis Magnetometer" | |
| depends on I2C | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to build support for the Freescale MAG3110 3-Axis | |
| magnetometer. | |
| To compile this driver as a module, choose M here: the module | |
| will be called mag3110. | |
| config HID_SENSOR_MAGNETOMETER_3D | |
| depends on HID_SENSOR_HUB | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| select HID_SENSOR_IIO_COMMON | |
| select HID_SENSOR_IIO_TRIGGER | |
| tristate "HID Magenetometer 3D" | |
| help | |
| Say yes here to build support for the HID SENSOR | |
| Magnetometer 3D. | |
| config MMC35240 | |
| tristate "MEMSIC MMC35240 3-axis magnetic sensor" | |
| select REGMAP_I2C | |
| depends on I2C | |
| help | |
| Say yes here to build support for the MEMSIC MMC35240 3-axis | |
| magnetic sensor. | |
| To compile this driver as a module, choose M here: the module | |
| will be called mmc35240. | |
| config IIO_ST_MAGN_3AXIS | |
| tristate "STMicroelectronics magnetometers 3-Axis Driver" | |
| depends on (I2C || SPI_MASTER) && SYSFS | |
| select IIO_ST_SENSORS_CORE | |
| select IIO_ST_MAGN_I2C_3AXIS if (I2C) | |
| select IIO_ST_MAGN_SPI_3AXIS if (SPI_MASTER) | |
| select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) | |
| help | |
| Say yes here to build support for STMicroelectronics magnetometers: | |
| LSM303DLHC, LSM303DLM, LIS3MDL. | |
| This driver can also be built as a module. If so, these modules | |
| will be created: | |
| - st_magn (core functions for the driver [it is mandatory]); | |
| - st_magn_i2c (necessary for the I2C devices [optional*]); | |
| - st_magn_spi (necessary for the SPI devices [optional*]); | |
| (*) one of these is necessary to do something. | |
| config IIO_ST_MAGN_I2C_3AXIS | |
| tristate | |
| depends on IIO_ST_MAGN_3AXIS | |
| depends on IIO_ST_SENSORS_I2C | |
| config IIO_ST_MAGN_SPI_3AXIS | |
| tristate | |
| depends on IIO_ST_MAGN_3AXIS | |
| depends on IIO_ST_SENSORS_SPI | |
| config SENSORS_HMC5843 | |
| tristate | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| config SENSORS_HMC5843_I2C | |
| tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer (I2C)" | |
| depends on I2C | |
| select SENSORS_HMC5843 | |
| select REGMAP_I2C | |
| help | |
| Say Y here to add support for the Honeywell HMC5843, HMC5883 and | |
| HMC5883L 3-Axis Magnetometer (digital compass). | |
| This driver can also be compiled as a set of modules. | |
| If so, these modules will be created: | |
| - hmc5843_core (core functions) | |
| - hmc5843_i2c (support for HMC5843, HMC5883, HMC5883L and HMC5983) | |
| config SENSORS_HMC5843_SPI | |
| tristate "Honeywell HMC5983 3-Axis Magnetometer (SPI)" | |
| depends on SPI_MASTER | |
| select SENSORS_HMC5843 | |
| select REGMAP_SPI | |
| help | |
| Say Y here to add support for the Honeywell HMC5983 3-Axis Magnetometer | |
| (digital compass). | |
| This driver can also be compiled as a set of modules. | |
| If so, these modules will be created: | |
| - hmc5843_core (core functions) | |
| - hmc5843_spi (support for HMC5983) | |
| endmenu |