| /* | |
| * NXP LPC32xx SoC Key Scan Interface | |
| * | |
| * Authors: | |
| * Kevin Wells <kevin.wells@nxp.com> | |
| * Roland Stigge <stigge@antcom.de> | |
| * | |
| * Copyright (C) 2010 NXP Semiconductors | |
| * Copyright (C) 2012 Roland Stigge | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * | |
| * This controller supports square key matrices from 1x1 up to 8x8 | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/slab.h> | |
| #include <linux/irq.h> | |
| #include <linux/pm.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/input.h> | |
| #include <linux/clk.h> | |
| #include <linux/io.h> | |
| #include <linux/of.h> | |
| #include <linux/input/matrix_keypad.h> | |
| #define DRV_NAME "lpc32xx_keys" | |
| /* | |
| * Key scanner register offsets | |
| */ | |
| #define LPC32XX_KS_DEB(x) ((x) + 0x00) | |
| #define LPC32XX_KS_STATE_COND(x) ((x) + 0x04) | |
| #define LPC32XX_KS_IRQ(x) ((x) + 0x08) | |
| #define LPC32XX_KS_SCAN_CTL(x) ((x) + 0x0C) | |
| #define LPC32XX_KS_FAST_TST(x) ((x) + 0x10) | |
| #define LPC32XX_KS_MATRIX_DIM(x) ((x) + 0x14) /* 1..8 */ | |
| #define LPC32XX_KS_DATA(x, y) ((x) + 0x40 + ((y) << 2)) | |
| #define LPC32XX_KSCAN_DEB_NUM_DEB_PASS(n) ((n) & 0xFF) | |
| #define LPC32XX_KSCAN_SCOND_IN_IDLE 0x0 | |
| #define LPC32XX_KSCAN_SCOND_IN_SCANONCE 0x1 | |
| #define LPC32XX_KSCAN_SCOND_IN_IRQGEN 0x2 | |
| #define LPC32XX_KSCAN_SCOND_IN_SCAN_MATRIX 0x3 | |
| #define LPC32XX_KSCAN_IRQ_PENDING_CLR 0x1 | |
| #define LPC32XX_KSCAN_SCTRL_SCAN_DELAY(n) ((n) & 0xFF) | |
| #define LPC32XX_KSCAN_FTST_FORCESCANONCE 0x1 | |
| #define LPC32XX_KSCAN_FTST_USE32K_CLK 0x2 | |
| #define LPC32XX_KSCAN_MSEL_SELECT(n) ((n) & 0xF) | |
| struct lpc32xx_kscan_drv { | |
| struct input_dev *input; | |
| struct clk *clk; | |
| void __iomem *kscan_base; | |
| unsigned int irq; | |
| u32 matrix_sz; /* Size of matrix in XxY, ie. 3 = 3x3 */ | |
| u32 deb_clks; /* Debounce clocks (based on 32KHz clock) */ | |
| u32 scan_delay; /* Scan delay (based on 32KHz clock) */ | |
| unsigned short *keymap; /* Pointer to key map for the scan matrix */ | |
| unsigned int row_shift; | |
| u8 lastkeystates[8]; | |
| }; | |
| static void lpc32xx_mod_states(struct lpc32xx_kscan_drv *kscandat, int col) | |
| { | |
| struct input_dev *input = kscandat->input; | |
| unsigned row, changed, scancode, keycode; | |
| u8 key; | |
| key = readl(LPC32XX_KS_DATA(kscandat->kscan_base, col)); | |
| changed = key ^ kscandat->lastkeystates[col]; | |
| kscandat->lastkeystates[col] = key; | |
| for (row = 0; changed; row++, changed >>= 1) { | |
| if (changed & 1) { | |
| /* Key state changed, signal an event */ | |
| scancode = MATRIX_SCAN_CODE(row, col, | |
| kscandat->row_shift); | |
| keycode = kscandat->keymap[scancode]; | |
| input_event(input, EV_MSC, MSC_SCAN, scancode); | |
| input_report_key(input, keycode, key & (1 << row)); | |
| } | |
| } | |
| } | |
| static irqreturn_t lpc32xx_kscan_irq(int irq, void *dev_id) | |
| { | |
| struct lpc32xx_kscan_drv *kscandat = dev_id; | |
| int i; | |
| for (i = 0; i < kscandat->matrix_sz; i++) | |
| lpc32xx_mod_states(kscandat, i); | |
| writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base)); | |
| input_sync(kscandat->input); | |
| return IRQ_HANDLED; | |
| } | |
| static int lpc32xx_kscan_open(struct input_dev *dev) | |
| { | |
| struct lpc32xx_kscan_drv *kscandat = input_get_drvdata(dev); | |
| int error; | |
| error = clk_prepare_enable(kscandat->clk); | |
| if (error) | |
| return error; | |
| writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base)); | |
| return 0; | |
| } | |
| static void lpc32xx_kscan_close(struct input_dev *dev) | |
| { | |
| struct lpc32xx_kscan_drv *kscandat = input_get_drvdata(dev); | |
| writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base)); | |
| clk_disable_unprepare(kscandat->clk); | |
| } | |
| static int lpc32xx_parse_dt(struct device *dev, | |
| struct lpc32xx_kscan_drv *kscandat) | |
| { | |
| struct device_node *np = dev->of_node; | |
| u32 rows = 0, columns = 0; | |
| int err; | |
| err = matrix_keypad_parse_of_params(dev, &rows, &columns); | |
| if (err) | |
| return err; | |
| if (rows != columns) { | |
| dev_err(dev, "rows and columns must be equal!\n"); | |
| return -EINVAL; | |
| } | |
| kscandat->matrix_sz = rows; | |
| kscandat->row_shift = get_count_order(columns); | |
| of_property_read_u32(np, "nxp,debounce-delay-ms", &kscandat->deb_clks); | |
| of_property_read_u32(np, "nxp,scan-delay-ms", &kscandat->scan_delay); | |
| if (!kscandat->deb_clks || !kscandat->scan_delay) { | |
| dev_err(dev, "debounce or scan delay not specified\n"); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int lpc32xx_kscan_probe(struct platform_device *pdev) | |
| { | |
| struct lpc32xx_kscan_drv *kscandat; | |
| struct input_dev *input; | |
| struct resource *res; | |
| size_t keymap_size; | |
| int error; | |
| int irq; | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| if (!res) { | |
| dev_err(&pdev->dev, "failed to get platform I/O memory\n"); | |
| return -EINVAL; | |
| } | |
| irq = platform_get_irq(pdev, 0); | |
| if (irq < 0 || irq >= NR_IRQS) { | |
| dev_err(&pdev->dev, "failed to get platform irq\n"); | |
| return -EINVAL; | |
| } | |
| kscandat = devm_kzalloc(&pdev->dev, sizeof(*kscandat), | |
| GFP_KERNEL); | |
| if (!kscandat) | |
| return -ENOMEM; | |
| error = lpc32xx_parse_dt(&pdev->dev, kscandat); | |
| if (error) { | |
| dev_err(&pdev->dev, "failed to parse device tree\n"); | |
| return error; | |
| } | |
| keymap_size = sizeof(kscandat->keymap[0]) * | |
| (kscandat->matrix_sz << kscandat->row_shift); | |
| kscandat->keymap = devm_kzalloc(&pdev->dev, keymap_size, GFP_KERNEL); | |
| if (!kscandat->keymap) | |
| return -ENOMEM; | |
| kscandat->input = input = devm_input_allocate_device(&pdev->dev); | |
| if (!input) { | |
| dev_err(&pdev->dev, "failed to allocate input device\n"); | |
| return -ENOMEM; | |
| } | |
| /* Setup key input */ | |
| input->name = pdev->name; | |
| input->phys = "lpc32xx/input0"; | |
| input->id.vendor = 0x0001; | |
| input->id.product = 0x0001; | |
| input->id.version = 0x0100; | |
| input->open = lpc32xx_kscan_open; | |
| input->close = lpc32xx_kscan_close; | |
| input->dev.parent = &pdev->dev; | |
| input_set_capability(input, EV_MSC, MSC_SCAN); | |
| error = matrix_keypad_build_keymap(NULL, NULL, | |
| kscandat->matrix_sz, | |
| kscandat->matrix_sz, | |
| kscandat->keymap, kscandat->input); | |
| if (error) { | |
| dev_err(&pdev->dev, "failed to build keymap\n"); | |
| return error; | |
| } | |
| input_set_drvdata(kscandat->input, kscandat); | |
| kscandat->kscan_base = devm_ioremap_resource(&pdev->dev, res); | |
| if (IS_ERR(kscandat->kscan_base)) | |
| return PTR_ERR(kscandat->kscan_base); | |
| /* Get the key scanner clock */ | |
| kscandat->clk = devm_clk_get(&pdev->dev, NULL); | |
| if (IS_ERR(kscandat->clk)) { | |
| dev_err(&pdev->dev, "failed to get clock\n"); | |
| return PTR_ERR(kscandat->clk); | |
| } | |
| /* Configure the key scanner */ | |
| error = clk_prepare_enable(kscandat->clk); | |
| if (error) | |
| return error; | |
| writel(kscandat->deb_clks, LPC32XX_KS_DEB(kscandat->kscan_base)); | |
| writel(kscandat->scan_delay, LPC32XX_KS_SCAN_CTL(kscandat->kscan_base)); | |
| writel(LPC32XX_KSCAN_FTST_USE32K_CLK, | |
| LPC32XX_KS_FAST_TST(kscandat->kscan_base)); | |
| writel(kscandat->matrix_sz, | |
| LPC32XX_KS_MATRIX_DIM(kscandat->kscan_base)); | |
| writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base)); | |
| clk_disable_unprepare(kscandat->clk); | |
| error = devm_request_irq(&pdev->dev, irq, lpc32xx_kscan_irq, 0, | |
| pdev->name, kscandat); | |
| if (error) { | |
| dev_err(&pdev->dev, "failed to request irq\n"); | |
| return error; | |
| } | |
| error = input_register_device(kscandat->input); | |
| if (error) { | |
| dev_err(&pdev->dev, "failed to register input device\n"); | |
| return error; | |
| } | |
| platform_set_drvdata(pdev, kscandat); | |
| return 0; | |
| } | |
| #ifdef CONFIG_PM_SLEEP | |
| static int lpc32xx_kscan_suspend(struct device *dev) | |
| { | |
| struct platform_device *pdev = to_platform_device(dev); | |
| struct lpc32xx_kscan_drv *kscandat = platform_get_drvdata(pdev); | |
| struct input_dev *input = kscandat->input; | |
| mutex_lock(&input->mutex); | |
| if (input->users) { | |
| /* Clear IRQ and disable clock */ | |
| writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base)); | |
| clk_disable_unprepare(kscandat->clk); | |
| } | |
| mutex_unlock(&input->mutex); | |
| return 0; | |
| } | |
| static int lpc32xx_kscan_resume(struct device *dev) | |
| { | |
| struct platform_device *pdev = to_platform_device(dev); | |
| struct lpc32xx_kscan_drv *kscandat = platform_get_drvdata(pdev); | |
| struct input_dev *input = kscandat->input; | |
| int retval = 0; | |
| mutex_lock(&input->mutex); | |
| if (input->users) { | |
| /* Enable clock and clear IRQ */ | |
| retval = clk_prepare_enable(kscandat->clk); | |
| if (retval == 0) | |
| writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base)); | |
| } | |
| mutex_unlock(&input->mutex); | |
| return retval; | |
| } | |
| #endif | |
| static SIMPLE_DEV_PM_OPS(lpc32xx_kscan_pm_ops, lpc32xx_kscan_suspend, | |
| lpc32xx_kscan_resume); | |
| static const struct of_device_id lpc32xx_kscan_match[] = { | |
| { .compatible = "nxp,lpc3220-key" }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, lpc32xx_kscan_match); | |
| static struct platform_driver lpc32xx_kscan_driver = { | |
| .probe = lpc32xx_kscan_probe, | |
| .driver = { | |
| .name = DRV_NAME, | |
| .pm = &lpc32xx_kscan_pm_ops, | |
| .of_match_table = lpc32xx_kscan_match, | |
| } | |
| }; | |
| module_platform_driver(lpc32xx_kscan_driver); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>"); | |
| MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>"); | |
| MODULE_DESCRIPTION("Key scanner driver for LPC32XX devices"); |