| /* | |
| * Synaptics NavPoint (PXA27x SSP/SPI) driver. | |
| * | |
| * Copyright (C) 2012 Paul Parsons <lost.distance@yahoo.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/clk.h> | |
| #include <linux/delay.h> | |
| #include <linux/gpio.h> | |
| #include <linux/input.h> | |
| #include <linux/input/navpoint.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/mutex.h> | |
| #include <linux/pxa2xx_ssp.h> | |
| #include <linux/slab.h> | |
| /* | |
| * Synaptics Modular Embedded Protocol: Module Packet Format. | |
| * Module header byte 2:0 = Length (# bytes that follow) | |
| * Module header byte 4:3 = Control | |
| * Module header byte 7:5 = Module Address | |
| */ | |
| #define HEADER_LENGTH(byte) ((byte) & 0x07) | |
| #define HEADER_CONTROL(byte) (((byte) >> 3) & 0x03) | |
| #define HEADER_ADDRESS(byte) ((byte) >> 5) | |
| struct navpoint { | |
| struct ssp_device *ssp; | |
| struct input_dev *input; | |
| struct device *dev; | |
| int gpio; | |
| int index; | |
| u8 data[1 + HEADER_LENGTH(0xff)]; | |
| }; | |
| /* | |
| * Initialization values for SSCR0_x, SSCR1_x, SSSR_x. | |
| */ | |
| static const u32 sscr0 = 0 | |
| | SSCR0_TUM /* TIM = 1; No TUR interrupts */ | |
| | SSCR0_RIM /* RIM = 1; No ROR interrupts */ | |
| | SSCR0_SSE /* SSE = 1; SSP enabled */ | |
| | SSCR0_Motorola /* FRF = 0; Motorola SPI */ | |
| | SSCR0_DataSize(16) /* DSS = 15; Data size = 16-bit */ | |
| ; | |
| static const u32 sscr1 = 0 | |
| | SSCR1_SCFR /* SCFR = 1; SSPSCLK only during transfers */ | |
| | SSCR1_SCLKDIR /* SCLKDIR = 1; Slave mode */ | |
| | SSCR1_SFRMDIR /* SFRMDIR = 1; Slave mode */ | |
| | SSCR1_RWOT /* RWOT = 1; Receive without transmit mode */ | |
| | SSCR1_RxTresh(1) /* RFT = 0; Receive FIFO threshold = 1 */ | |
| | SSCR1_SPH /* SPH = 1; SSPSCLK inactive 0.5 + 1 cycles */ | |
| | SSCR1_RIE /* RIE = 1; Receive FIFO interrupt enabled */ | |
| ; | |
| static const u32 sssr = 0 | |
| | SSSR_BCE /* BCE = 1; Clear BCE */ | |
| | SSSR_TUR /* TUR = 1; Clear TUR */ | |
| | SSSR_EOC /* EOC = 1; Clear EOC */ | |
| | SSSR_TINT /* TINT = 1; Clear TINT */ | |
| | SSSR_PINT /* PINT = 1; Clear PINT */ | |
| | SSSR_ROR /* ROR = 1; Clear ROR */ | |
| ; | |
| /* | |
| * MEP Query $22: Touchpad Coordinate Range Query is not supported by | |
| * the NavPoint module, so sampled values provide the default limits. | |
| */ | |
| #define NAVPOINT_X_MIN 1278 | |
| #define NAVPOINT_X_MAX 5340 | |
| #define NAVPOINT_Y_MIN 1572 | |
| #define NAVPOINT_Y_MAX 4396 | |
| #define NAVPOINT_PRESSURE_MIN 0 | |
| #define NAVPOINT_PRESSURE_MAX 255 | |
| static void navpoint_packet(struct navpoint *navpoint) | |
| { | |
| int finger; | |
| int gesture; | |
| int x, y, z; | |
| switch (navpoint->data[0]) { | |
| case 0xff: /* Garbage (packet?) between reset and Hello packet */ | |
| case 0x00: /* Module 0, NULL packet */ | |
| break; | |
| case 0x0e: /* Module 0, Absolute packet */ | |
| finger = (navpoint->data[1] & 0x01); | |
| gesture = (navpoint->data[1] & 0x02); | |
| x = ((navpoint->data[2] & 0x1f) << 8) | navpoint->data[3]; | |
| y = ((navpoint->data[4] & 0x1f) << 8) | navpoint->data[5]; | |
| z = navpoint->data[6]; | |
| input_report_key(navpoint->input, BTN_TOUCH, finger); | |
| input_report_abs(navpoint->input, ABS_X, x); | |
| input_report_abs(navpoint->input, ABS_Y, y); | |
| input_report_abs(navpoint->input, ABS_PRESSURE, z); | |
| input_report_key(navpoint->input, BTN_TOOL_FINGER, finger); | |
| input_report_key(navpoint->input, BTN_LEFT, gesture); | |
| input_sync(navpoint->input); | |
| break; | |
| case 0x19: /* Module 0, Hello packet */ | |
| if ((navpoint->data[1] & 0xf0) == 0x10) | |
| break; | |
| /* FALLTHROUGH */ | |
| default: | |
| dev_warn(navpoint->dev, | |
| "spurious packet: data=0x%02x,0x%02x,...\n", | |
| navpoint->data[0], navpoint->data[1]); | |
| break; | |
| } | |
| } | |
| static irqreturn_t navpoint_irq(int irq, void *dev_id) | |
| { | |
| struct navpoint *navpoint = dev_id; | |
| struct ssp_device *ssp = navpoint->ssp; | |
| irqreturn_t ret = IRQ_NONE; | |
| u32 status; | |
| status = pxa_ssp_read_reg(ssp, SSSR); | |
| if (status & sssr) { | |
| dev_warn(navpoint->dev, | |
| "unexpected interrupt: status=0x%08x\n", status); | |
| pxa_ssp_write_reg(ssp, SSSR, (status & sssr)); | |
| ret = IRQ_HANDLED; | |
| } | |
| while (status & SSSR_RNE) { | |
| u32 data; | |
| data = pxa_ssp_read_reg(ssp, SSDR); | |
| navpoint->data[navpoint->index + 0] = (data >> 8); | |
| navpoint->data[navpoint->index + 1] = data; | |
| navpoint->index += 2; | |
| if (HEADER_LENGTH(navpoint->data[0]) < navpoint->index) { | |
| navpoint_packet(navpoint); | |
| navpoint->index = 0; | |
| } | |
| status = pxa_ssp_read_reg(ssp, SSSR); | |
| ret = IRQ_HANDLED; | |
| } | |
| return ret; | |
| } | |
| static void navpoint_up(struct navpoint *navpoint) | |
| { | |
| struct ssp_device *ssp = navpoint->ssp; | |
| int timeout; | |
| clk_prepare_enable(ssp->clk); | |
| pxa_ssp_write_reg(ssp, SSCR1, sscr1); | |
| pxa_ssp_write_reg(ssp, SSSR, sssr); | |
| pxa_ssp_write_reg(ssp, SSTO, 0); | |
| pxa_ssp_write_reg(ssp, SSCR0, sscr0); /* SSCR0_SSE written last */ | |
| /* Wait until SSP port is ready for slave clock operations */ | |
| for (timeout = 100; timeout != 0; --timeout) { | |
| if (!(pxa_ssp_read_reg(ssp, SSSR) & SSSR_CSS)) | |
| break; | |
| msleep(1); | |
| } | |
| if (timeout == 0) | |
| dev_err(navpoint->dev, | |
| "timeout waiting for SSSR[CSS] to clear\n"); | |
| if (gpio_is_valid(navpoint->gpio)) | |
| gpio_set_value(navpoint->gpio, 1); | |
| } | |
| static void navpoint_down(struct navpoint *navpoint) | |
| { | |
| struct ssp_device *ssp = navpoint->ssp; | |
| if (gpio_is_valid(navpoint->gpio)) | |
| gpio_set_value(navpoint->gpio, 0); | |
| pxa_ssp_write_reg(ssp, SSCR0, 0); | |
| clk_disable_unprepare(ssp->clk); | |
| } | |
| static int navpoint_open(struct input_dev *input) | |
| { | |
| struct navpoint *navpoint = input_get_drvdata(input); | |
| navpoint_up(navpoint); | |
| return 0; | |
| } | |
| static void navpoint_close(struct input_dev *input) | |
| { | |
| struct navpoint *navpoint = input_get_drvdata(input); | |
| navpoint_down(navpoint); | |
| } | |
| static int navpoint_probe(struct platform_device *pdev) | |
| { | |
| const struct navpoint_platform_data *pdata = | |
| dev_get_platdata(&pdev->dev); | |
| struct ssp_device *ssp; | |
| struct input_dev *input; | |
| struct navpoint *navpoint; | |
| int error; | |
| if (!pdata) { | |
| dev_err(&pdev->dev, "no platform data\n"); | |
| return -EINVAL; | |
| } | |
| if (gpio_is_valid(pdata->gpio)) { | |
| error = gpio_request_one(pdata->gpio, GPIOF_OUT_INIT_LOW, | |
| "SYNAPTICS_ON"); | |
| if (error) | |
| return error; | |
| } | |
| ssp = pxa_ssp_request(pdata->port, pdev->name); | |
| if (!ssp) { | |
| error = -ENODEV; | |
| goto err_free_gpio; | |
| } | |
| /* HaRET does not disable devices before jumping into Linux */ | |
| if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) { | |
| pxa_ssp_write_reg(ssp, SSCR0, 0); | |
| dev_warn(&pdev->dev, "ssp%d already enabled\n", pdata->port); | |
| } | |
| navpoint = kzalloc(sizeof(*navpoint), GFP_KERNEL); | |
| input = input_allocate_device(); | |
| if (!navpoint || !input) { | |
| error = -ENOMEM; | |
| goto err_free_mem; | |
| } | |
| navpoint->ssp = ssp; | |
| navpoint->input = input; | |
| navpoint->dev = &pdev->dev; | |
| navpoint->gpio = pdata->gpio; | |
| input->name = pdev->name; | |
| input->dev.parent = &pdev->dev; | |
| __set_bit(EV_KEY, input->evbit); | |
| __set_bit(EV_ABS, input->evbit); | |
| __set_bit(BTN_LEFT, input->keybit); | |
| __set_bit(BTN_TOUCH, input->keybit); | |
| __set_bit(BTN_TOOL_FINGER, input->keybit); | |
| input_set_abs_params(input, ABS_X, | |
| NAVPOINT_X_MIN, NAVPOINT_X_MAX, 0, 0); | |
| input_set_abs_params(input, ABS_Y, | |
| NAVPOINT_Y_MIN, NAVPOINT_Y_MAX, 0, 0); | |
| input_set_abs_params(input, ABS_PRESSURE, | |
| NAVPOINT_PRESSURE_MIN, NAVPOINT_PRESSURE_MAX, | |
| 0, 0); | |
| input->open = navpoint_open; | |
| input->close = navpoint_close; | |
| input_set_drvdata(input, navpoint); | |
| error = request_irq(ssp->irq, navpoint_irq, 0, pdev->name, navpoint); | |
| if (error) | |
| goto err_free_mem; | |
| error = input_register_device(input); | |
| if (error) | |
| goto err_free_irq; | |
| platform_set_drvdata(pdev, navpoint); | |
| dev_dbg(&pdev->dev, "ssp%d, irq %d\n", pdata->port, ssp->irq); | |
| return 0; | |
| err_free_irq: | |
| free_irq(ssp->irq, navpoint); | |
| err_free_mem: | |
| input_free_device(input); | |
| kfree(navpoint); | |
| pxa_ssp_free(ssp); | |
| err_free_gpio: | |
| if (gpio_is_valid(pdata->gpio)) | |
| gpio_free(pdata->gpio); | |
| return error; | |
| } | |
| static int navpoint_remove(struct platform_device *pdev) | |
| { | |
| const struct navpoint_platform_data *pdata = | |
| dev_get_platdata(&pdev->dev); | |
| struct navpoint *navpoint = platform_get_drvdata(pdev); | |
| struct ssp_device *ssp = navpoint->ssp; | |
| free_irq(ssp->irq, navpoint); | |
| input_unregister_device(navpoint->input); | |
| kfree(navpoint); | |
| pxa_ssp_free(ssp); | |
| if (gpio_is_valid(pdata->gpio)) | |
| gpio_free(pdata->gpio); | |
| return 0; | |
| } | |
| static int __maybe_unused navpoint_suspend(struct device *dev) | |
| { | |
| struct platform_device *pdev = to_platform_device(dev); | |
| struct navpoint *navpoint = platform_get_drvdata(pdev); | |
| struct input_dev *input = navpoint->input; | |
| mutex_lock(&input->mutex); | |
| if (input->users) | |
| navpoint_down(navpoint); | |
| mutex_unlock(&input->mutex); | |
| return 0; | |
| } | |
| static int __maybe_unused navpoint_resume(struct device *dev) | |
| { | |
| struct platform_device *pdev = to_platform_device(dev); | |
| struct navpoint *navpoint = platform_get_drvdata(pdev); | |
| struct input_dev *input = navpoint->input; | |
| mutex_lock(&input->mutex); | |
| if (input->users) | |
| navpoint_up(navpoint); | |
| mutex_unlock(&input->mutex); | |
| return 0; | |
| } | |
| static SIMPLE_DEV_PM_OPS(navpoint_pm_ops, navpoint_suspend, navpoint_resume); | |
| static struct platform_driver navpoint_driver = { | |
| .probe = navpoint_probe, | |
| .remove = navpoint_remove, | |
| .driver = { | |
| .name = "navpoint", | |
| .pm = &navpoint_pm_ops, | |
| }, | |
| }; | |
| module_platform_driver(navpoint_driver); | |
| MODULE_AUTHOR("Paul Parsons <lost.distance@yahoo.com>"); | |
| MODULE_DESCRIPTION("Synaptics NavPoint (PXA27x SSP/SPI) driver"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_ALIAS("platform:navpoint"); |