| /* | |
| * IPMMU VMSA | |
| * | |
| * Copyright (C) 2014 Renesas Electronics Corporation | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; version 2 of the License. | |
| */ | |
| #include <linux/delay.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/err.h> | |
| #include <linux/export.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/io.h> | |
| #include <linux/iommu.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/sizes.h> | |
| #include <linux/slab.h> | |
| #include <asm/dma-iommu.h> | |
| #include <asm/pgalloc.h> | |
| #include "io-pgtable.h" | |
| struct ipmmu_vmsa_device { | |
| struct device *dev; | |
| void __iomem *base; | |
| struct list_head list; | |
| unsigned int num_utlbs; | |
| struct dma_iommu_mapping *mapping; | |
| }; | |
| struct ipmmu_vmsa_domain { | |
| struct ipmmu_vmsa_device *mmu; | |
| struct iommu_domain io_domain; | |
| struct io_pgtable_cfg cfg; | |
| struct io_pgtable_ops *iop; | |
| unsigned int context_id; | |
| spinlock_t lock; /* Protects mappings */ | |
| }; | |
| struct ipmmu_vmsa_archdata { | |
| struct ipmmu_vmsa_device *mmu; | |
| unsigned int *utlbs; | |
| unsigned int num_utlbs; | |
| }; | |
| static DEFINE_SPINLOCK(ipmmu_devices_lock); | |
| static LIST_HEAD(ipmmu_devices); | |
| static struct ipmmu_vmsa_domain *to_vmsa_domain(struct iommu_domain *dom) | |
| { | |
| return container_of(dom, struct ipmmu_vmsa_domain, io_domain); | |
| } | |
| #define TLB_LOOP_TIMEOUT 100 /* 100us */ | |
| /* ----------------------------------------------------------------------------- | |
| * Registers Definition | |
| */ | |
| #define IM_NS_ALIAS_OFFSET 0x800 | |
| #define IM_CTX_SIZE 0x40 | |
| #define IMCTR 0x0000 | |
| #define IMCTR_TRE (1 << 17) | |
| #define IMCTR_AFE (1 << 16) | |
| #define IMCTR_RTSEL_MASK (3 << 4) | |
| #define IMCTR_RTSEL_SHIFT 4 | |
| #define IMCTR_TREN (1 << 3) | |
| #define IMCTR_INTEN (1 << 2) | |
| #define IMCTR_FLUSH (1 << 1) | |
| #define IMCTR_MMUEN (1 << 0) | |
| #define IMCAAR 0x0004 | |
| #define IMTTBCR 0x0008 | |
| #define IMTTBCR_EAE (1 << 31) | |
| #define IMTTBCR_PMB (1 << 30) | |
| #define IMTTBCR_SH1_NON_SHAREABLE (0 << 28) | |
| #define IMTTBCR_SH1_OUTER_SHAREABLE (2 << 28) | |
| #define IMTTBCR_SH1_INNER_SHAREABLE (3 << 28) | |
| #define IMTTBCR_SH1_MASK (3 << 28) | |
| #define IMTTBCR_ORGN1_NC (0 << 26) | |
| #define IMTTBCR_ORGN1_WB_WA (1 << 26) | |
| #define IMTTBCR_ORGN1_WT (2 << 26) | |
| #define IMTTBCR_ORGN1_WB (3 << 26) | |
| #define IMTTBCR_ORGN1_MASK (3 << 26) | |
| #define IMTTBCR_IRGN1_NC (0 << 24) | |
| #define IMTTBCR_IRGN1_WB_WA (1 << 24) | |
| #define IMTTBCR_IRGN1_WT (2 << 24) | |
| #define IMTTBCR_IRGN1_WB (3 << 24) | |
| #define IMTTBCR_IRGN1_MASK (3 << 24) | |
| #define IMTTBCR_TSZ1_MASK (7 << 16) | |
| #define IMTTBCR_TSZ1_SHIFT 16 | |
| #define IMTTBCR_SH0_NON_SHAREABLE (0 << 12) | |
| #define IMTTBCR_SH0_OUTER_SHAREABLE (2 << 12) | |
| #define IMTTBCR_SH0_INNER_SHAREABLE (3 << 12) | |
| #define IMTTBCR_SH0_MASK (3 << 12) | |
| #define IMTTBCR_ORGN0_NC (0 << 10) | |
| #define IMTTBCR_ORGN0_WB_WA (1 << 10) | |
| #define IMTTBCR_ORGN0_WT (2 << 10) | |
| #define IMTTBCR_ORGN0_WB (3 << 10) | |
| #define IMTTBCR_ORGN0_MASK (3 << 10) | |
| #define IMTTBCR_IRGN0_NC (0 << 8) | |
| #define IMTTBCR_IRGN0_WB_WA (1 << 8) | |
| #define IMTTBCR_IRGN0_WT (2 << 8) | |
| #define IMTTBCR_IRGN0_WB (3 << 8) | |
| #define IMTTBCR_IRGN0_MASK (3 << 8) | |
| #define IMTTBCR_SL0_LVL_2 (0 << 4) | |
| #define IMTTBCR_SL0_LVL_1 (1 << 4) | |
| #define IMTTBCR_TSZ0_MASK (7 << 0) | |
| #define IMTTBCR_TSZ0_SHIFT O | |
| #define IMBUSCR 0x000c | |
| #define IMBUSCR_DVM (1 << 2) | |
| #define IMBUSCR_BUSSEL_SYS (0 << 0) | |
| #define IMBUSCR_BUSSEL_CCI (1 << 0) | |
| #define IMBUSCR_BUSSEL_IMCAAR (2 << 0) | |
| #define IMBUSCR_BUSSEL_CCI_IMCAAR (3 << 0) | |
| #define IMBUSCR_BUSSEL_MASK (3 << 0) | |
| #define IMTTLBR0 0x0010 | |
| #define IMTTUBR0 0x0014 | |
| #define IMTTLBR1 0x0018 | |
| #define IMTTUBR1 0x001c | |
| #define IMSTR 0x0020 | |
| #define IMSTR_ERRLVL_MASK (3 << 12) | |
| #define IMSTR_ERRLVL_SHIFT 12 | |
| #define IMSTR_ERRCODE_TLB_FORMAT (1 << 8) | |
| #define IMSTR_ERRCODE_ACCESS_PERM (4 << 8) | |
| #define IMSTR_ERRCODE_SECURE_ACCESS (5 << 8) | |
| #define IMSTR_ERRCODE_MASK (7 << 8) | |
| #define IMSTR_MHIT (1 << 4) | |
| #define IMSTR_ABORT (1 << 2) | |
| #define IMSTR_PF (1 << 1) | |
| #define IMSTR_TF (1 << 0) | |
| #define IMMAIR0 0x0028 | |
| #define IMMAIR1 0x002c | |
| #define IMMAIR_ATTR_MASK 0xff | |
| #define IMMAIR_ATTR_DEVICE 0x04 | |
| #define IMMAIR_ATTR_NC 0x44 | |
| #define IMMAIR_ATTR_WBRWA 0xff | |
| #define IMMAIR_ATTR_SHIFT(n) ((n) << 3) | |
| #define IMMAIR_ATTR_IDX_NC 0 | |
| #define IMMAIR_ATTR_IDX_WBRWA 1 | |
| #define IMMAIR_ATTR_IDX_DEV 2 | |
| #define IMEAR 0x0030 | |
| #define IMPCTR 0x0200 | |
| #define IMPSTR 0x0208 | |
| #define IMPEAR 0x020c | |
| #define IMPMBA(n) (0x0280 + ((n) * 4)) | |
| #define IMPMBD(n) (0x02c0 + ((n) * 4)) | |
| #define IMUCTR(n) (0x0300 + ((n) * 16)) | |
| #define IMUCTR_FIXADDEN (1 << 31) | |
| #define IMUCTR_FIXADD_MASK (0xff << 16) | |
| #define IMUCTR_FIXADD_SHIFT 16 | |
| #define IMUCTR_TTSEL_MMU(n) ((n) << 4) | |
| #define IMUCTR_TTSEL_PMB (8 << 4) | |
| #define IMUCTR_TTSEL_MASK (15 << 4) | |
| #define IMUCTR_FLUSH (1 << 1) | |
| #define IMUCTR_MMUEN (1 << 0) | |
| #define IMUASID(n) (0x0308 + ((n) * 16)) | |
| #define IMUASID_ASID8_MASK (0xff << 8) | |
| #define IMUASID_ASID8_SHIFT 8 | |
| #define IMUASID_ASID0_MASK (0xff << 0) | |
| #define IMUASID_ASID0_SHIFT 0 | |
| /* ----------------------------------------------------------------------------- | |
| * Read/Write Access | |
| */ | |
| static u32 ipmmu_read(struct ipmmu_vmsa_device *mmu, unsigned int offset) | |
| { | |
| return ioread32(mmu->base + offset); | |
| } | |
| static void ipmmu_write(struct ipmmu_vmsa_device *mmu, unsigned int offset, | |
| u32 data) | |
| { | |
| iowrite32(data, mmu->base + offset); | |
| } | |
| static u32 ipmmu_ctx_read(struct ipmmu_vmsa_domain *domain, unsigned int reg) | |
| { | |
| return ipmmu_read(domain->mmu, domain->context_id * IM_CTX_SIZE + reg); | |
| } | |
| static void ipmmu_ctx_write(struct ipmmu_vmsa_domain *domain, unsigned int reg, | |
| u32 data) | |
| { | |
| ipmmu_write(domain->mmu, domain->context_id * IM_CTX_SIZE + reg, data); | |
| } | |
| /* ----------------------------------------------------------------------------- | |
| * TLB and microTLB Management | |
| */ | |
| /* Wait for any pending TLB invalidations to complete */ | |
| static void ipmmu_tlb_sync(struct ipmmu_vmsa_domain *domain) | |
| { | |
| unsigned int count = 0; | |
| while (ipmmu_ctx_read(domain, IMCTR) & IMCTR_FLUSH) { | |
| cpu_relax(); | |
| if (++count == TLB_LOOP_TIMEOUT) { | |
| dev_err_ratelimited(domain->mmu->dev, | |
| "TLB sync timed out -- MMU may be deadlocked\n"); | |
| return; | |
| } | |
| udelay(1); | |
| } | |
| } | |
| static void ipmmu_tlb_invalidate(struct ipmmu_vmsa_domain *domain) | |
| { | |
| u32 reg; | |
| reg = ipmmu_ctx_read(domain, IMCTR); | |
| reg |= IMCTR_FLUSH; | |
| ipmmu_ctx_write(domain, IMCTR, reg); | |
| ipmmu_tlb_sync(domain); | |
| } | |
| /* | |
| * Enable MMU translation for the microTLB. | |
| */ | |
| static void ipmmu_utlb_enable(struct ipmmu_vmsa_domain *domain, | |
| unsigned int utlb) | |
| { | |
| struct ipmmu_vmsa_device *mmu = domain->mmu; | |
| /* | |
| * TODO: Reference-count the microTLB as several bus masters can be | |
| * connected to the same microTLB. | |
| */ | |
| /* TODO: What should we set the ASID to ? */ | |
| ipmmu_write(mmu, IMUASID(utlb), 0); | |
| /* TODO: Do we need to flush the microTLB ? */ | |
| ipmmu_write(mmu, IMUCTR(utlb), | |
| IMUCTR_TTSEL_MMU(domain->context_id) | IMUCTR_FLUSH | | |
| IMUCTR_MMUEN); | |
| } | |
| /* | |
| * Disable MMU translation for the microTLB. | |
| */ | |
| static void ipmmu_utlb_disable(struct ipmmu_vmsa_domain *domain, | |
| unsigned int utlb) | |
| { | |
| struct ipmmu_vmsa_device *mmu = domain->mmu; | |
| ipmmu_write(mmu, IMUCTR(utlb), 0); | |
| } | |
| static void ipmmu_tlb_flush_all(void *cookie) | |
| { | |
| struct ipmmu_vmsa_domain *domain = cookie; | |
| ipmmu_tlb_invalidate(domain); | |
| } | |
| static void ipmmu_tlb_add_flush(unsigned long iova, size_t size, | |
| size_t granule, bool leaf, void *cookie) | |
| { | |
| /* The hardware doesn't support selective TLB flush. */ | |
| } | |
| static struct iommu_gather_ops ipmmu_gather_ops = { | |
| .tlb_flush_all = ipmmu_tlb_flush_all, | |
| .tlb_add_flush = ipmmu_tlb_add_flush, | |
| .tlb_sync = ipmmu_tlb_flush_all, | |
| }; | |
| /* ----------------------------------------------------------------------------- | |
| * Domain/Context Management | |
| */ | |
| static int ipmmu_domain_init_context(struct ipmmu_vmsa_domain *domain) | |
| { | |
| u64 ttbr; | |
| /* | |
| * Allocate the page table operations. | |
| * | |
| * VMSA states in section B3.6.3 "Control of Secure or Non-secure memory | |
| * access, Long-descriptor format" that the NStable bit being set in a | |
| * table descriptor will result in the NStable and NS bits of all child | |
| * entries being ignored and considered as being set. The IPMMU seems | |
| * not to comply with this, as it generates a secure access page fault | |
| * if any of the NStable and NS bits isn't set when running in | |
| * non-secure mode. | |
| */ | |
| domain->cfg.quirks = IO_PGTABLE_QUIRK_ARM_NS; | |
| domain->cfg.pgsize_bitmap = SZ_1G | SZ_2M | SZ_4K, | |
| domain->cfg.ias = 32; | |
| domain->cfg.oas = 40; | |
| domain->cfg.tlb = &ipmmu_gather_ops; | |
| /* | |
| * TODO: Add support for coherent walk through CCI with DVM and remove | |
| * cache handling. For now, delegate it to the io-pgtable code. | |
| */ | |
| domain->cfg.iommu_dev = domain->mmu->dev; | |
| domain->iop = alloc_io_pgtable_ops(ARM_32_LPAE_S1, &domain->cfg, | |
| domain); | |
| if (!domain->iop) | |
| return -EINVAL; | |
| /* | |
| * TODO: When adding support for multiple contexts, find an unused | |
| * context. | |
| */ | |
| domain->context_id = 0; | |
| /* TTBR0 */ | |
| ttbr = domain->cfg.arm_lpae_s1_cfg.ttbr[0]; | |
| ipmmu_ctx_write(domain, IMTTLBR0, ttbr); | |
| ipmmu_ctx_write(domain, IMTTUBR0, ttbr >> 32); | |
| /* | |
| * TTBCR | |
| * We use long descriptors with inner-shareable WBWA tables and allocate | |
| * the whole 32-bit VA space to TTBR0. | |
| */ | |
| ipmmu_ctx_write(domain, IMTTBCR, IMTTBCR_EAE | | |
| IMTTBCR_SH0_INNER_SHAREABLE | IMTTBCR_ORGN0_WB_WA | | |
| IMTTBCR_IRGN0_WB_WA | IMTTBCR_SL0_LVL_1); | |
| /* MAIR0 */ | |
| ipmmu_ctx_write(domain, IMMAIR0, domain->cfg.arm_lpae_s1_cfg.mair[0]); | |
| /* IMBUSCR */ | |
| ipmmu_ctx_write(domain, IMBUSCR, | |
| ipmmu_ctx_read(domain, IMBUSCR) & | |
| ~(IMBUSCR_DVM | IMBUSCR_BUSSEL_MASK)); | |
| /* | |
| * IMSTR | |
| * Clear all interrupt flags. | |
| */ | |
| ipmmu_ctx_write(domain, IMSTR, ipmmu_ctx_read(domain, IMSTR)); | |
| /* | |
| * IMCTR | |
| * Enable the MMU and interrupt generation. The long-descriptor | |
| * translation table format doesn't use TEX remapping. Don't enable AF | |
| * software management as we have no use for it. Flush the TLB as | |
| * required when modifying the context registers. | |
| */ | |
| ipmmu_ctx_write(domain, IMCTR, IMCTR_INTEN | IMCTR_FLUSH | IMCTR_MMUEN); | |
| return 0; | |
| } | |
| static void ipmmu_domain_destroy_context(struct ipmmu_vmsa_domain *domain) | |
| { | |
| /* | |
| * Disable the context. Flush the TLB as required when modifying the | |
| * context registers. | |
| * | |
| * TODO: Is TLB flush really needed ? | |
| */ | |
| ipmmu_ctx_write(domain, IMCTR, IMCTR_FLUSH); | |
| ipmmu_tlb_sync(domain); | |
| } | |
| /* ----------------------------------------------------------------------------- | |
| * Fault Handling | |
| */ | |
| static irqreturn_t ipmmu_domain_irq(struct ipmmu_vmsa_domain *domain) | |
| { | |
| const u32 err_mask = IMSTR_MHIT | IMSTR_ABORT | IMSTR_PF | IMSTR_TF; | |
| struct ipmmu_vmsa_device *mmu = domain->mmu; | |
| u32 status; | |
| u32 iova; | |
| status = ipmmu_ctx_read(domain, IMSTR); | |
| if (!(status & err_mask)) | |
| return IRQ_NONE; | |
| iova = ipmmu_ctx_read(domain, IMEAR); | |
| /* | |
| * Clear the error status flags. Unlike traditional interrupt flag | |
| * registers that must be cleared by writing 1, this status register | |
| * seems to require 0. The error address register must be read before, | |
| * otherwise its value will be 0. | |
| */ | |
| ipmmu_ctx_write(domain, IMSTR, 0); | |
| /* Log fatal errors. */ | |
| if (status & IMSTR_MHIT) | |
| dev_err_ratelimited(mmu->dev, "Multiple TLB hits @0x%08x\n", | |
| iova); | |
| if (status & IMSTR_ABORT) | |
| dev_err_ratelimited(mmu->dev, "Page Table Walk Abort @0x%08x\n", | |
| iova); | |
| if (!(status & (IMSTR_PF | IMSTR_TF))) | |
| return IRQ_NONE; | |
| /* | |
| * Try to handle page faults and translation faults. | |
| * | |
| * TODO: We need to look up the faulty device based on the I/O VA. Use | |
| * the IOMMU device for now. | |
| */ | |
| if (!report_iommu_fault(&domain->io_domain, mmu->dev, iova, 0)) | |
| return IRQ_HANDLED; | |
| dev_err_ratelimited(mmu->dev, | |
| "Unhandled fault: status 0x%08x iova 0x%08x\n", | |
| status, iova); | |
| return IRQ_HANDLED; | |
| } | |
| static irqreturn_t ipmmu_irq(int irq, void *dev) | |
| { | |
| struct ipmmu_vmsa_device *mmu = dev; | |
| struct iommu_domain *io_domain; | |
| struct ipmmu_vmsa_domain *domain; | |
| if (!mmu->mapping) | |
| return IRQ_NONE; | |
| io_domain = mmu->mapping->domain; | |
| domain = to_vmsa_domain(io_domain); | |
| return ipmmu_domain_irq(domain); | |
| } | |
| /* ----------------------------------------------------------------------------- | |
| * IOMMU Operations | |
| */ | |
| static struct iommu_domain *ipmmu_domain_alloc(unsigned type) | |
| { | |
| struct ipmmu_vmsa_domain *domain; | |
| if (type != IOMMU_DOMAIN_UNMANAGED) | |
| return NULL; | |
| domain = kzalloc(sizeof(*domain), GFP_KERNEL); | |
| if (!domain) | |
| return NULL; | |
| spin_lock_init(&domain->lock); | |
| return &domain->io_domain; | |
| } | |
| static void ipmmu_domain_free(struct iommu_domain *io_domain) | |
| { | |
| struct ipmmu_vmsa_domain *domain = to_vmsa_domain(io_domain); | |
| /* | |
| * Free the domain resources. We assume that all devices have already | |
| * been detached. | |
| */ | |
| ipmmu_domain_destroy_context(domain); | |
| free_io_pgtable_ops(domain->iop); | |
| kfree(domain); | |
| } | |
| static int ipmmu_attach_device(struct iommu_domain *io_domain, | |
| struct device *dev) | |
| { | |
| struct ipmmu_vmsa_archdata *archdata = dev->archdata.iommu; | |
| struct ipmmu_vmsa_device *mmu = archdata->mmu; | |
| struct ipmmu_vmsa_domain *domain = to_vmsa_domain(io_domain); | |
| unsigned long flags; | |
| unsigned int i; | |
| int ret = 0; | |
| if (!mmu) { | |
| dev_err(dev, "Cannot attach to IPMMU\n"); | |
| return -ENXIO; | |
| } | |
| spin_lock_irqsave(&domain->lock, flags); | |
| if (!domain->mmu) { | |
| /* The domain hasn't been used yet, initialize it. */ | |
| domain->mmu = mmu; | |
| ret = ipmmu_domain_init_context(domain); | |
| } else if (domain->mmu != mmu) { | |
| /* | |
| * Something is wrong, we can't attach two devices using | |
| * different IOMMUs to the same domain. | |
| */ | |
| dev_err(dev, "Can't attach IPMMU %s to domain on IPMMU %s\n", | |
| dev_name(mmu->dev), dev_name(domain->mmu->dev)); | |
| ret = -EINVAL; | |
| } | |
| spin_unlock_irqrestore(&domain->lock, flags); | |
| if (ret < 0) | |
| return ret; | |
| for (i = 0; i < archdata->num_utlbs; ++i) | |
| ipmmu_utlb_enable(domain, archdata->utlbs[i]); | |
| return 0; | |
| } | |
| static void ipmmu_detach_device(struct iommu_domain *io_domain, | |
| struct device *dev) | |
| { | |
| struct ipmmu_vmsa_archdata *archdata = dev->archdata.iommu; | |
| struct ipmmu_vmsa_domain *domain = to_vmsa_domain(io_domain); | |
| unsigned int i; | |
| for (i = 0; i < archdata->num_utlbs; ++i) | |
| ipmmu_utlb_disable(domain, archdata->utlbs[i]); | |
| /* | |
| * TODO: Optimize by disabling the context when no device is attached. | |
| */ | |
| } | |
| static int ipmmu_map(struct iommu_domain *io_domain, unsigned long iova, | |
| phys_addr_t paddr, size_t size, int prot) | |
| { | |
| struct ipmmu_vmsa_domain *domain = to_vmsa_domain(io_domain); | |
| if (!domain) | |
| return -ENODEV; | |
| return domain->iop->map(domain->iop, iova, paddr, size, prot); | |
| } | |
| static size_t ipmmu_unmap(struct iommu_domain *io_domain, unsigned long iova, | |
| size_t size) | |
| { | |
| struct ipmmu_vmsa_domain *domain = to_vmsa_domain(io_domain); | |
| return domain->iop->unmap(domain->iop, iova, size); | |
| } | |
| static phys_addr_t ipmmu_iova_to_phys(struct iommu_domain *io_domain, | |
| dma_addr_t iova) | |
| { | |
| struct ipmmu_vmsa_domain *domain = to_vmsa_domain(io_domain); | |
| /* TODO: Is locking needed ? */ | |
| return domain->iop->iova_to_phys(domain->iop, iova); | |
| } | |
| static int ipmmu_find_utlbs(struct ipmmu_vmsa_device *mmu, struct device *dev, | |
| unsigned int *utlbs, unsigned int num_utlbs) | |
| { | |
| unsigned int i; | |
| for (i = 0; i < num_utlbs; ++i) { | |
| struct of_phandle_args args; | |
| int ret; | |
| ret = of_parse_phandle_with_args(dev->of_node, "iommus", | |
| "#iommu-cells", i, &args); | |
| if (ret < 0) | |
| return ret; | |
| of_node_put(args.np); | |
| if (args.np != mmu->dev->of_node || args.args_count != 1) | |
| return -EINVAL; | |
| utlbs[i] = args.args[0]; | |
| } | |
| return 0; | |
| } | |
| static int ipmmu_add_device(struct device *dev) | |
| { | |
| struct ipmmu_vmsa_archdata *archdata; | |
| struct ipmmu_vmsa_device *mmu; | |
| struct iommu_group *group = NULL; | |
| unsigned int *utlbs; | |
| unsigned int i; | |
| int num_utlbs; | |
| int ret = -ENODEV; | |
| if (dev->archdata.iommu) { | |
| dev_warn(dev, "IOMMU driver already assigned to device %s\n", | |
| dev_name(dev)); | |
| return -EINVAL; | |
| } | |
| /* Find the master corresponding to the device. */ | |
| num_utlbs = of_count_phandle_with_args(dev->of_node, "iommus", | |
| "#iommu-cells"); | |
| if (num_utlbs < 0) | |
| return -ENODEV; | |
| utlbs = kcalloc(num_utlbs, sizeof(*utlbs), GFP_KERNEL); | |
| if (!utlbs) | |
| return -ENOMEM; | |
| spin_lock(&ipmmu_devices_lock); | |
| list_for_each_entry(mmu, &ipmmu_devices, list) { | |
| ret = ipmmu_find_utlbs(mmu, dev, utlbs, num_utlbs); | |
| if (!ret) { | |
| /* | |
| * TODO Take a reference to the MMU to protect | |
| * against device removal. | |
| */ | |
| break; | |
| } | |
| } | |
| spin_unlock(&ipmmu_devices_lock); | |
| if (ret < 0) | |
| goto error; | |
| for (i = 0; i < num_utlbs; ++i) { | |
| if (utlbs[i] >= mmu->num_utlbs) { | |
| ret = -EINVAL; | |
| goto error; | |
| } | |
| } | |
| /* Create a device group and add the device to it. */ | |
| group = iommu_group_alloc(); | |
| if (IS_ERR(group)) { | |
| dev_err(dev, "Failed to allocate IOMMU group\n"); | |
| ret = PTR_ERR(group); | |
| goto error; | |
| } | |
| ret = iommu_group_add_device(group, dev); | |
| iommu_group_put(group); | |
| if (ret < 0) { | |
| dev_err(dev, "Failed to add device to IPMMU group\n"); | |
| group = NULL; | |
| goto error; | |
| } | |
| archdata = kzalloc(sizeof(*archdata), GFP_KERNEL); | |
| if (!archdata) { | |
| ret = -ENOMEM; | |
| goto error; | |
| } | |
| archdata->mmu = mmu; | |
| archdata->utlbs = utlbs; | |
| archdata->num_utlbs = num_utlbs; | |
| dev->archdata.iommu = archdata; | |
| /* | |
| * Create the ARM mapping, used by the ARM DMA mapping core to allocate | |
| * VAs. This will allocate a corresponding IOMMU domain. | |
| * | |
| * TODO: | |
| * - Create one mapping per context (TLB). | |
| * - Make the mapping size configurable ? We currently use a 2GB mapping | |
| * at a 1GB offset to ensure that NULL VAs will fault. | |
| */ | |
| if (!mmu->mapping) { | |
| struct dma_iommu_mapping *mapping; | |
| mapping = arm_iommu_create_mapping(&platform_bus_type, | |
| SZ_1G, SZ_2G); | |
| if (IS_ERR(mapping)) { | |
| dev_err(mmu->dev, "failed to create ARM IOMMU mapping\n"); | |
| ret = PTR_ERR(mapping); | |
| goto error; | |
| } | |
| mmu->mapping = mapping; | |
| } | |
| /* Attach the ARM VA mapping to the device. */ | |
| ret = arm_iommu_attach_device(dev, mmu->mapping); | |
| if (ret < 0) { | |
| dev_err(dev, "Failed to attach device to VA mapping\n"); | |
| goto error; | |
| } | |
| return 0; | |
| error: | |
| arm_iommu_release_mapping(mmu->mapping); | |
| kfree(dev->archdata.iommu); | |
| kfree(utlbs); | |
| dev->archdata.iommu = NULL; | |
| if (!IS_ERR_OR_NULL(group)) | |
| iommu_group_remove_device(dev); | |
| return ret; | |
| } | |
| static void ipmmu_remove_device(struct device *dev) | |
| { | |
| struct ipmmu_vmsa_archdata *archdata = dev->archdata.iommu; | |
| arm_iommu_detach_device(dev); | |
| iommu_group_remove_device(dev); | |
| kfree(archdata->utlbs); | |
| kfree(archdata); | |
| dev->archdata.iommu = NULL; | |
| } | |
| static const struct iommu_ops ipmmu_ops = { | |
| .domain_alloc = ipmmu_domain_alloc, | |
| .domain_free = ipmmu_domain_free, | |
| .attach_dev = ipmmu_attach_device, | |
| .detach_dev = ipmmu_detach_device, | |
| .map = ipmmu_map, | |
| .unmap = ipmmu_unmap, | |
| .map_sg = default_iommu_map_sg, | |
| .iova_to_phys = ipmmu_iova_to_phys, | |
| .add_device = ipmmu_add_device, | |
| .remove_device = ipmmu_remove_device, | |
| .pgsize_bitmap = SZ_1G | SZ_2M | SZ_4K, | |
| }; | |
| /* ----------------------------------------------------------------------------- | |
| * Probe/remove and init | |
| */ | |
| static void ipmmu_device_reset(struct ipmmu_vmsa_device *mmu) | |
| { | |
| unsigned int i; | |
| /* Disable all contexts. */ | |
| for (i = 0; i < 4; ++i) | |
| ipmmu_write(mmu, i * IM_CTX_SIZE + IMCTR, 0); | |
| } | |
| static int ipmmu_probe(struct platform_device *pdev) | |
| { | |
| struct ipmmu_vmsa_device *mmu; | |
| struct resource *res; | |
| int irq; | |
| int ret; | |
| if (!IS_ENABLED(CONFIG_OF) && !pdev->dev.platform_data) { | |
| dev_err(&pdev->dev, "missing platform data\n"); | |
| return -EINVAL; | |
| } | |
| mmu = devm_kzalloc(&pdev->dev, sizeof(*mmu), GFP_KERNEL); | |
| if (!mmu) { | |
| dev_err(&pdev->dev, "cannot allocate device data\n"); | |
| return -ENOMEM; | |
| } | |
| mmu->dev = &pdev->dev; | |
| mmu->num_utlbs = 32; | |
| /* Map I/O memory and request IRQ. */ | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| mmu->base = devm_ioremap_resource(&pdev->dev, res); | |
| if (IS_ERR(mmu->base)) | |
| return PTR_ERR(mmu->base); | |
| /* | |
| * The IPMMU has two register banks, for secure and non-secure modes. | |
| * The bank mapped at the beginning of the IPMMU address space | |
| * corresponds to the running mode of the CPU. When running in secure | |
| * mode the non-secure register bank is also available at an offset. | |
| * | |
| * Secure mode operation isn't clearly documented and is thus currently | |
| * not implemented in the driver. Furthermore, preliminary tests of | |
| * non-secure operation with the main register bank were not successful. | |
| * Offset the registers base unconditionally to point to the non-secure | |
| * alias space for now. | |
| */ | |
| mmu->base += IM_NS_ALIAS_OFFSET; | |
| irq = platform_get_irq(pdev, 0); | |
| if (irq < 0) { | |
| dev_err(&pdev->dev, "no IRQ found\n"); | |
| return irq; | |
| } | |
| ret = devm_request_irq(&pdev->dev, irq, ipmmu_irq, 0, | |
| dev_name(&pdev->dev), mmu); | |
| if (ret < 0) { | |
| dev_err(&pdev->dev, "failed to request IRQ %d\n", irq); | |
| return ret; | |
| } | |
| ipmmu_device_reset(mmu); | |
| /* | |
| * We can't create the ARM mapping here as it requires the bus to have | |
| * an IOMMU, which only happens when bus_set_iommu() is called in | |
| * ipmmu_init() after the probe function returns. | |
| */ | |
| spin_lock(&ipmmu_devices_lock); | |
| list_add(&mmu->list, &ipmmu_devices); | |
| spin_unlock(&ipmmu_devices_lock); | |
| platform_set_drvdata(pdev, mmu); | |
| return 0; | |
| } | |
| static int ipmmu_remove(struct platform_device *pdev) | |
| { | |
| struct ipmmu_vmsa_device *mmu = platform_get_drvdata(pdev); | |
| spin_lock(&ipmmu_devices_lock); | |
| list_del(&mmu->list); | |
| spin_unlock(&ipmmu_devices_lock); | |
| arm_iommu_release_mapping(mmu->mapping); | |
| ipmmu_device_reset(mmu); | |
| return 0; | |
| } | |
| static const struct of_device_id ipmmu_of_ids[] = { | |
| { .compatible = "renesas,ipmmu-vmsa", }, | |
| { } | |
| }; | |
| static struct platform_driver ipmmu_driver = { | |
| .driver = { | |
| .name = "ipmmu-vmsa", | |
| .of_match_table = of_match_ptr(ipmmu_of_ids), | |
| }, | |
| .probe = ipmmu_probe, | |
| .remove = ipmmu_remove, | |
| }; | |
| static int __init ipmmu_init(void) | |
| { | |
| int ret; | |
| ret = platform_driver_register(&ipmmu_driver); | |
| if (ret < 0) | |
| return ret; | |
| if (!iommu_present(&platform_bus_type)) | |
| bus_set_iommu(&platform_bus_type, &ipmmu_ops); | |
| return 0; | |
| } | |
| static void __exit ipmmu_exit(void) | |
| { | |
| return platform_driver_unregister(&ipmmu_driver); | |
| } | |
| subsys_initcall(ipmmu_init); | |
| module_exit(ipmmu_exit); | |
| MODULE_DESCRIPTION("IOMMU API for Renesas VMSA-compatible IPMMU"); | |
| MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); | |
| MODULE_LICENSE("GPL v2"); |