| /** | |
| * tpci200.c | |
| * | |
| * driver for the TEWS TPCI-200 device | |
| * | |
| * Copyright (C) 2009-2012 CERN (www.cern.ch) | |
| * Author: Nicolas Serafini, EIC2 SA | |
| * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the Free | |
| * Software Foundation; version 2 of the License. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/slab.h> | |
| #include "tpci200.h" | |
| static const u16 tpci200_status_timeout[] = { | |
| TPCI200_A_TIMEOUT, | |
| TPCI200_B_TIMEOUT, | |
| TPCI200_C_TIMEOUT, | |
| TPCI200_D_TIMEOUT, | |
| }; | |
| static const u16 tpci200_status_error[] = { | |
| TPCI200_A_ERROR, | |
| TPCI200_B_ERROR, | |
| TPCI200_C_ERROR, | |
| TPCI200_D_ERROR, | |
| }; | |
| static const size_t tpci200_space_size[IPACK_SPACE_COUNT] = { | |
| [IPACK_IO_SPACE] = TPCI200_IO_SPACE_SIZE, | |
| [IPACK_ID_SPACE] = TPCI200_ID_SPACE_SIZE, | |
| [IPACK_INT_SPACE] = TPCI200_INT_SPACE_SIZE, | |
| [IPACK_MEM8_SPACE] = TPCI200_MEM8_SPACE_SIZE, | |
| [IPACK_MEM16_SPACE] = TPCI200_MEM16_SPACE_SIZE, | |
| }; | |
| static const size_t tpci200_space_interval[IPACK_SPACE_COUNT] = { | |
| [IPACK_IO_SPACE] = TPCI200_IO_SPACE_INTERVAL, | |
| [IPACK_ID_SPACE] = TPCI200_ID_SPACE_INTERVAL, | |
| [IPACK_INT_SPACE] = TPCI200_INT_SPACE_INTERVAL, | |
| [IPACK_MEM8_SPACE] = TPCI200_MEM8_SPACE_INTERVAL, | |
| [IPACK_MEM16_SPACE] = TPCI200_MEM16_SPACE_INTERVAL, | |
| }; | |
| static struct tpci200_board *check_slot(struct ipack_device *dev) | |
| { | |
| struct tpci200_board *tpci200; | |
| if (dev == NULL) | |
| return NULL; | |
| tpci200 = dev_get_drvdata(dev->bus->parent); | |
| if (tpci200 == NULL) { | |
| dev_info(&dev->dev, "carrier board not found\n"); | |
| return NULL; | |
| } | |
| if (dev->slot >= TPCI200_NB_SLOT) { | |
| dev_info(&dev->dev, | |
| "Slot [%d:%d] doesn't exist! Last tpci200 slot is %d.\n", | |
| dev->bus->bus_nr, dev->slot, TPCI200_NB_SLOT-1); | |
| return NULL; | |
| } | |
| return tpci200; | |
| } | |
| static void tpci200_clear_mask(struct tpci200_board *tpci200, | |
| __le16 __iomem *addr, u16 mask) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&tpci200->regs_lock, flags); | |
| iowrite16(ioread16(addr) & (~mask), addr); | |
| spin_unlock_irqrestore(&tpci200->regs_lock, flags); | |
| } | |
| static void tpci200_set_mask(struct tpci200_board *tpci200, | |
| __le16 __iomem *addr, u16 mask) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&tpci200->regs_lock, flags); | |
| iowrite16(ioread16(addr) | mask, addr); | |
| spin_unlock_irqrestore(&tpci200->regs_lock, flags); | |
| } | |
| static void tpci200_unregister(struct tpci200_board *tpci200) | |
| { | |
| free_irq(tpci200->info->pdev->irq, (void *) tpci200); | |
| pci_iounmap(tpci200->info->pdev, tpci200->info->interface_regs); | |
| pci_iounmap(tpci200->info->pdev, tpci200->info->cfg_regs); | |
| pci_release_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR); | |
| pci_release_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR); | |
| pci_release_region(tpci200->info->pdev, TPCI200_MEM16_SPACE_BAR); | |
| pci_release_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR); | |
| pci_release_region(tpci200->info->pdev, TPCI200_CFG_MEM_BAR); | |
| pci_disable_device(tpci200->info->pdev); | |
| pci_dev_put(tpci200->info->pdev); | |
| } | |
| static void tpci200_enable_irq(struct tpci200_board *tpci200, | |
| int islot) | |
| { | |
| tpci200_set_mask(tpci200, | |
| &tpci200->info->interface_regs->control[islot], | |
| TPCI200_INT0_EN | TPCI200_INT1_EN); | |
| } | |
| static void tpci200_disable_irq(struct tpci200_board *tpci200, | |
| int islot) | |
| { | |
| tpci200_clear_mask(tpci200, | |
| &tpci200->info->interface_regs->control[islot], | |
| TPCI200_INT0_EN | TPCI200_INT1_EN); | |
| } | |
| static irqreturn_t tpci200_slot_irq(struct slot_irq *slot_irq) | |
| { | |
| irqreturn_t ret; | |
| if (!slot_irq) | |
| return -ENODEV; | |
| ret = slot_irq->handler(slot_irq->arg); | |
| return ret; | |
| } | |
| static irqreturn_t tpci200_interrupt(int irq, void *dev_id) | |
| { | |
| struct tpci200_board *tpci200 = (struct tpci200_board *) dev_id; | |
| struct slot_irq *slot_irq; | |
| irqreturn_t ret; | |
| u16 status_reg; | |
| int i; | |
| /* Read status register */ | |
| status_reg = ioread16(&tpci200->info->interface_regs->status); | |
| /* Did we cause the interrupt? */ | |
| if (!(status_reg & TPCI200_SLOT_INT_MASK)) | |
| return IRQ_NONE; | |
| /* callback to the IRQ handler for the corresponding slot */ | |
| rcu_read_lock(); | |
| for (i = 0; i < TPCI200_NB_SLOT; i++) { | |
| if (!(status_reg & ((TPCI200_A_INT0 | TPCI200_A_INT1) << (2 * i)))) | |
| continue; | |
| slot_irq = rcu_dereference(tpci200->slots[i].irq); | |
| ret = tpci200_slot_irq(slot_irq); | |
| if (ret == -ENODEV) { | |
| dev_info(&tpci200->info->pdev->dev, | |
| "No registered ISR for slot [%d:%d]!. IRQ will be disabled.\n", | |
| tpci200->number, i); | |
| tpci200_disable_irq(tpci200, i); | |
| } | |
| } | |
| rcu_read_unlock(); | |
| return IRQ_HANDLED; | |
| } | |
| static int tpci200_free_irq(struct ipack_device *dev) | |
| { | |
| struct slot_irq *slot_irq; | |
| struct tpci200_board *tpci200; | |
| tpci200 = check_slot(dev); | |
| if (tpci200 == NULL) | |
| return -EINVAL; | |
| if (mutex_lock_interruptible(&tpci200->mutex)) | |
| return -ERESTARTSYS; | |
| if (tpci200->slots[dev->slot].irq == NULL) { | |
| mutex_unlock(&tpci200->mutex); | |
| return -EINVAL; | |
| } | |
| tpci200_disable_irq(tpci200, dev->slot); | |
| slot_irq = tpci200->slots[dev->slot].irq; | |
| /* uninstall handler */ | |
| RCU_INIT_POINTER(tpci200->slots[dev->slot].irq, NULL); | |
| synchronize_rcu(); | |
| kfree(slot_irq); | |
| mutex_unlock(&tpci200->mutex); | |
| return 0; | |
| } | |
| static int tpci200_request_irq(struct ipack_device *dev, | |
| irqreturn_t (*handler)(void *), void *arg) | |
| { | |
| int res = 0; | |
| struct slot_irq *slot_irq; | |
| struct tpci200_board *tpci200; | |
| tpci200 = check_slot(dev); | |
| if (tpci200 == NULL) | |
| return -EINVAL; | |
| if (mutex_lock_interruptible(&tpci200->mutex)) | |
| return -ERESTARTSYS; | |
| if (tpci200->slots[dev->slot].irq != NULL) { | |
| dev_err(&dev->dev, | |
| "Slot [%d:%d] IRQ already registered !\n", | |
| dev->bus->bus_nr, | |
| dev->slot); | |
| res = -EINVAL; | |
| goto out_unlock; | |
| } | |
| slot_irq = kzalloc(sizeof(struct slot_irq), GFP_KERNEL); | |
| if (slot_irq == NULL) { | |
| dev_err(&dev->dev, | |
| "Slot [%d:%d] unable to allocate memory for IRQ !\n", | |
| dev->bus->bus_nr, dev->slot); | |
| res = -ENOMEM; | |
| goto out_unlock; | |
| } | |
| /* | |
| * WARNING: Setup Interrupt Vector in the IndustryPack device | |
| * before an IRQ request. | |
| * Read the User Manual of your IndustryPack device to know | |
| * where to write the vector in memory. | |
| */ | |
| slot_irq->handler = handler; | |
| slot_irq->arg = arg; | |
| slot_irq->holder = dev; | |
| rcu_assign_pointer(tpci200->slots[dev->slot].irq, slot_irq); | |
| tpci200_enable_irq(tpci200, dev->slot); | |
| out_unlock: | |
| mutex_unlock(&tpci200->mutex); | |
| return res; | |
| } | |
| static int tpci200_register(struct tpci200_board *tpci200) | |
| { | |
| int i; | |
| int res; | |
| phys_addr_t ioidint_base; | |
| unsigned short slot_ctrl; | |
| if (pci_enable_device(tpci200->info->pdev) < 0) | |
| return -ENODEV; | |
| /* Request IP interface register (Bar 2) */ | |
| res = pci_request_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR, | |
| "Carrier IP interface registers"); | |
| if (res) { | |
| dev_err(&tpci200->info->pdev->dev, | |
| "(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 2 !", | |
| tpci200->info->pdev->bus->number, | |
| tpci200->info->pdev->devfn); | |
| goto out_disable_pci; | |
| } | |
| /* Request IO ID INT space (Bar 3) */ | |
| res = pci_request_region(tpci200->info->pdev, | |
| TPCI200_IO_ID_INT_SPACES_BAR, | |
| "Carrier IO ID INT space"); | |
| if (res) { | |
| dev_err(&tpci200->info->pdev->dev, | |
| "(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 3 !", | |
| tpci200->info->pdev->bus->number, | |
| tpci200->info->pdev->devfn); | |
| goto out_release_ip_space; | |
| } | |
| /* Request MEM8 space (Bar 5) */ | |
| res = pci_request_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR, | |
| "Carrier MEM8 space"); | |
| if (res) { | |
| dev_err(&tpci200->info->pdev->dev, | |
| "(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 5!", | |
| tpci200->info->pdev->bus->number, | |
| tpci200->info->pdev->devfn); | |
| goto out_release_ioid_int_space; | |
| } | |
| /* Request MEM16 space (Bar 4) */ | |
| res = pci_request_region(tpci200->info->pdev, TPCI200_MEM16_SPACE_BAR, | |
| "Carrier MEM16 space"); | |
| if (res) { | |
| dev_err(&tpci200->info->pdev->dev, | |
| "(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 4!", | |
| tpci200->info->pdev->bus->number, | |
| tpci200->info->pdev->devfn); | |
| goto out_release_mem8_space; | |
| } | |
| /* Map internal tpci200 driver user space */ | |
| tpci200->info->interface_regs = | |
| ioremap_nocache(pci_resource_start(tpci200->info->pdev, | |
| TPCI200_IP_INTERFACE_BAR), | |
| TPCI200_IFACE_SIZE); | |
| /* Initialize lock that protects interface_regs */ | |
| spin_lock_init(&tpci200->regs_lock); | |
| ioidint_base = pci_resource_start(tpci200->info->pdev, | |
| TPCI200_IO_ID_INT_SPACES_BAR); | |
| tpci200->mod_mem[IPACK_IO_SPACE] = ioidint_base + TPCI200_IO_SPACE_OFF; | |
| tpci200->mod_mem[IPACK_ID_SPACE] = ioidint_base + TPCI200_ID_SPACE_OFF; | |
| tpci200->mod_mem[IPACK_INT_SPACE] = | |
| ioidint_base + TPCI200_INT_SPACE_OFF; | |
| tpci200->mod_mem[IPACK_MEM8_SPACE] = | |
| pci_resource_start(tpci200->info->pdev, | |
| TPCI200_MEM8_SPACE_BAR); | |
| tpci200->mod_mem[IPACK_MEM16_SPACE] = | |
| pci_resource_start(tpci200->info->pdev, | |
| TPCI200_MEM16_SPACE_BAR); | |
| /* Set the default parameters of the slot | |
| * INT0 disabled, level sensitive | |
| * INT1 disabled, level sensitive | |
| * error interrupt disabled | |
| * timeout interrupt disabled | |
| * recover time disabled | |
| * clock rate 8 MHz | |
| */ | |
| slot_ctrl = 0; | |
| for (i = 0; i < TPCI200_NB_SLOT; i++) | |
| writew(slot_ctrl, &tpci200->info->interface_regs->control[i]); | |
| res = request_irq(tpci200->info->pdev->irq, | |
| tpci200_interrupt, IRQF_SHARED, | |
| KBUILD_MODNAME, (void *) tpci200); | |
| if (res) { | |
| dev_err(&tpci200->info->pdev->dev, | |
| "(bn 0x%X, sn 0x%X) unable to register IRQ !", | |
| tpci200->info->pdev->bus->number, | |
| tpci200->info->pdev->devfn); | |
| goto out_release_ioid_int_space; | |
| } | |
| return 0; | |
| out_release_mem8_space: | |
| pci_release_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR); | |
| out_release_ioid_int_space: | |
| pci_release_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR); | |
| out_release_ip_space: | |
| pci_release_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR); | |
| out_disable_pci: | |
| pci_disable_device(tpci200->info->pdev); | |
| return res; | |
| } | |
| static int tpci200_get_clockrate(struct ipack_device *dev) | |
| { | |
| struct tpci200_board *tpci200 = check_slot(dev); | |
| __le16 __iomem *addr; | |
| if (!tpci200) | |
| return -ENODEV; | |
| addr = &tpci200->info->interface_regs->control[dev->slot]; | |
| return (ioread16(addr) & TPCI200_CLK32) ? 32 : 8; | |
| } | |
| static int tpci200_set_clockrate(struct ipack_device *dev, int mherz) | |
| { | |
| struct tpci200_board *tpci200 = check_slot(dev); | |
| __le16 __iomem *addr; | |
| if (!tpci200) | |
| return -ENODEV; | |
| addr = &tpci200->info->interface_regs->control[dev->slot]; | |
| switch (mherz) { | |
| case 8: | |
| tpci200_clear_mask(tpci200, addr, TPCI200_CLK32); | |
| break; | |
| case 32: | |
| tpci200_set_mask(tpci200, addr, TPCI200_CLK32); | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int tpci200_get_error(struct ipack_device *dev) | |
| { | |
| struct tpci200_board *tpci200 = check_slot(dev); | |
| __le16 __iomem *addr; | |
| u16 mask; | |
| if (!tpci200) | |
| return -ENODEV; | |
| addr = &tpci200->info->interface_regs->status; | |
| mask = tpci200_status_error[dev->slot]; | |
| return (ioread16(addr) & mask) ? 1 : 0; | |
| } | |
| static int tpci200_get_timeout(struct ipack_device *dev) | |
| { | |
| struct tpci200_board *tpci200 = check_slot(dev); | |
| __le16 __iomem *addr; | |
| u16 mask; | |
| if (!tpci200) | |
| return -ENODEV; | |
| addr = &tpci200->info->interface_regs->status; | |
| mask = tpci200_status_timeout[dev->slot]; | |
| return (ioread16(addr) & mask) ? 1 : 0; | |
| } | |
| static int tpci200_reset_timeout(struct ipack_device *dev) | |
| { | |
| struct tpci200_board *tpci200 = check_slot(dev); | |
| __le16 __iomem *addr; | |
| u16 mask; | |
| if (!tpci200) | |
| return -ENODEV; | |
| addr = &tpci200->info->interface_regs->status; | |
| mask = tpci200_status_timeout[dev->slot]; | |
| iowrite16(mask, addr); | |
| return 0; | |
| } | |
| static void tpci200_uninstall(struct tpci200_board *tpci200) | |
| { | |
| tpci200_unregister(tpci200); | |
| kfree(tpci200->slots); | |
| } | |
| static const struct ipack_bus_ops tpci200_bus_ops = { | |
| .request_irq = tpci200_request_irq, | |
| .free_irq = tpci200_free_irq, | |
| .get_clockrate = tpci200_get_clockrate, | |
| .set_clockrate = tpci200_set_clockrate, | |
| .get_error = tpci200_get_error, | |
| .get_timeout = tpci200_get_timeout, | |
| .reset_timeout = tpci200_reset_timeout, | |
| }; | |
| static int tpci200_install(struct tpci200_board *tpci200) | |
| { | |
| int res; | |
| tpci200->slots = kzalloc( | |
| TPCI200_NB_SLOT * sizeof(struct tpci200_slot), GFP_KERNEL); | |
| if (tpci200->slots == NULL) | |
| return -ENOMEM; | |
| res = tpci200_register(tpci200); | |
| if (res) { | |
| kfree(tpci200->slots); | |
| tpci200->slots = NULL; | |
| return res; | |
| } | |
| mutex_init(&tpci200->mutex); | |
| return 0; | |
| } | |
| static void tpci200_release_device(struct ipack_device *dev) | |
| { | |
| kfree(dev); | |
| } | |
| static int tpci200_create_device(struct tpci200_board *tpci200, int i) | |
| { | |
| int ret; | |
| enum ipack_space space; | |
| struct ipack_device *dev = | |
| kzalloc(sizeof(struct ipack_device), GFP_KERNEL); | |
| if (!dev) | |
| return -ENOMEM; | |
| dev->slot = i; | |
| dev->bus = tpci200->info->ipack_bus; | |
| dev->release = tpci200_release_device; | |
| for (space = 0; space < IPACK_SPACE_COUNT; space++) { | |
| dev->region[space].start = | |
| tpci200->mod_mem[space] | |
| + tpci200_space_interval[space] * i; | |
| dev->region[space].size = tpci200_space_size[space]; | |
| } | |
| ret = ipack_device_init(dev); | |
| if (ret < 0) { | |
| ipack_put_device(dev); | |
| return ret; | |
| } | |
| ret = ipack_device_add(dev); | |
| if (ret < 0) | |
| ipack_put_device(dev); | |
| return ret; | |
| } | |
| static int tpci200_pci_probe(struct pci_dev *pdev, | |
| const struct pci_device_id *id) | |
| { | |
| int ret, i; | |
| struct tpci200_board *tpci200; | |
| u32 reg32; | |
| tpci200 = kzalloc(sizeof(struct tpci200_board), GFP_KERNEL); | |
| if (!tpci200) | |
| return -ENOMEM; | |
| tpci200->info = kzalloc(sizeof(struct tpci200_infos), GFP_KERNEL); | |
| if (!tpci200->info) { | |
| ret = -ENOMEM; | |
| goto out_err_info; | |
| } | |
| pci_dev_get(pdev); | |
| /* Obtain a mapping of the carrier's PCI configuration registers */ | |
| ret = pci_request_region(pdev, TPCI200_CFG_MEM_BAR, | |
| KBUILD_MODNAME " Configuration Memory"); | |
| if (ret) { | |
| dev_err(&pdev->dev, "Failed to allocate PCI Configuration Memory"); | |
| ret = -EBUSY; | |
| goto out_err_pci_request; | |
| } | |
| tpci200->info->cfg_regs = ioremap_nocache( | |
| pci_resource_start(pdev, TPCI200_CFG_MEM_BAR), | |
| pci_resource_len(pdev, TPCI200_CFG_MEM_BAR)); | |
| if (!tpci200->info->cfg_regs) { | |
| dev_err(&pdev->dev, "Failed to map PCI Configuration Memory"); | |
| ret = -EFAULT; | |
| goto out_err_ioremap; | |
| } | |
| /* Disable byte swapping for 16 bit IP module access. This will ensure | |
| * that the Industrypack big endian byte order is preserved by the | |
| * carrier. */ | |
| reg32 = ioread32(tpci200->info->cfg_regs + LAS1_DESC); | |
| reg32 |= 1 << LAS_BIT_BIGENDIAN; | |
| iowrite32(reg32, tpci200->info->cfg_regs + LAS1_DESC); | |
| reg32 = ioread32(tpci200->info->cfg_regs + LAS2_DESC); | |
| reg32 |= 1 << LAS_BIT_BIGENDIAN; | |
| iowrite32(reg32, tpci200->info->cfg_regs + LAS2_DESC); | |
| /* Save struct pci_dev pointer */ | |
| tpci200->info->pdev = pdev; | |
| tpci200->info->id_table = (struct pci_device_id *)id; | |
| /* register the device and initialize it */ | |
| ret = tpci200_install(tpci200); | |
| if (ret) { | |
| dev_err(&pdev->dev, "error during tpci200 install\n"); | |
| ret = -ENODEV; | |
| goto out_err_install; | |
| } | |
| /* Register the carrier in the industry pack bus driver */ | |
| tpci200->info->ipack_bus = ipack_bus_register(&pdev->dev, | |
| TPCI200_NB_SLOT, | |
| &tpci200_bus_ops, | |
| THIS_MODULE); | |
| if (!tpci200->info->ipack_bus) { | |
| dev_err(&pdev->dev, | |
| "error registering the carrier on ipack driver\n"); | |
| ret = -EFAULT; | |
| goto out_err_bus_register; | |
| } | |
| /* save the bus number given by ipack to logging purpose */ | |
| tpci200->number = tpci200->info->ipack_bus->bus_nr; | |
| dev_set_drvdata(&pdev->dev, tpci200); | |
| for (i = 0; i < TPCI200_NB_SLOT; i++) | |
| tpci200_create_device(tpci200, i); | |
| return 0; | |
| out_err_bus_register: | |
| tpci200_uninstall(tpci200); | |
| out_err_install: | |
| iounmap(tpci200->info->cfg_regs); | |
| out_err_ioremap: | |
| pci_release_region(pdev, TPCI200_CFG_MEM_BAR); | |
| out_err_pci_request: | |
| pci_dev_put(pdev); | |
| kfree(tpci200->info); | |
| out_err_info: | |
| kfree(tpci200); | |
| return ret; | |
| } | |
| static void __tpci200_pci_remove(struct tpci200_board *tpci200) | |
| { | |
| ipack_bus_unregister(tpci200->info->ipack_bus); | |
| tpci200_uninstall(tpci200); | |
| kfree(tpci200->info); | |
| kfree(tpci200); | |
| } | |
| static void tpci200_pci_remove(struct pci_dev *dev) | |
| { | |
| struct tpci200_board *tpci200 = pci_get_drvdata(dev); | |
| __tpci200_pci_remove(tpci200); | |
| } | |
| static const struct pci_device_id tpci200_idtable[] = { | |
| { TPCI200_VENDOR_ID, TPCI200_DEVICE_ID, TPCI200_SUBVENDOR_ID, | |
| TPCI200_SUBDEVICE_ID }, | |
| { 0, }, | |
| }; | |
| MODULE_DEVICE_TABLE(pci, tpci200_idtable); | |
| static struct pci_driver tpci200_pci_drv = { | |
| .name = "tpci200", | |
| .id_table = tpci200_idtable, | |
| .probe = tpci200_pci_probe, | |
| .remove = tpci200_pci_remove, | |
| }; | |
| module_pci_driver(tpci200_pci_drv); | |
| MODULE_DESCRIPTION("TEWS TPCI-200 device driver"); | |
| MODULE_LICENSE("GPL"); |