| /* $Id: capidrv.c,v 1.1.2.2 2004/01/12 23:17:24 keil Exp $ | |
| * | |
| * ISDN4Linux Driver, using capi20 interface (kernelcapi) | |
| * | |
| * Copyright 1997 by Carsten Paeth <calle@calle.de> | |
| * | |
| * This software may be used and distributed according to the terms | |
| * of the GNU General Public License, incorporated herein by reference. | |
| * | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/errno.h> | |
| #include <linux/kernel.h> | |
| #include <linux/major.h> | |
| #include <linux/slab.h> | |
| #include <linux/fcntl.h> | |
| #include <linux/fs.h> | |
| #include <linux/signal.h> | |
| #include <linux/mm.h> | |
| #include <linux/timer.h> | |
| #include <linux/wait.h> | |
| #include <linux/skbuff.h> | |
| #include <linux/isdn.h> | |
| #include <linux/isdnif.h> | |
| #include <linux/proc_fs.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/capi.h> | |
| #include <linux/kernelcapi.h> | |
| #include <linux/ctype.h> | |
| #include <linux/init.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/isdn/capiutil.h> | |
| #include <linux/isdn/capicmd.h> | |
| #include "capidrv.h" | |
| static int debugmode = 0; | |
| MODULE_DESCRIPTION("CAPI4Linux: Interface to ISDN4Linux"); | |
| MODULE_AUTHOR("Carsten Paeth"); | |
| MODULE_LICENSE("GPL"); | |
| module_param(debugmode, uint, S_IRUGO | S_IWUSR); | |
| /* -------- type definitions ----------------------------------------- */ | |
| struct capidrv_contr { | |
| struct capidrv_contr *next; | |
| struct module *owner; | |
| u32 contrnr; | |
| char name[20]; | |
| /* | |
| * for isdn4linux | |
| */ | |
| isdn_if interface; | |
| int myid; | |
| /* | |
| * LISTEN state | |
| */ | |
| int state; | |
| u32 cipmask; | |
| u32 cipmask2; | |
| struct timer_list listentimer; | |
| /* | |
| * ID of capi message sent | |
| */ | |
| u16 msgid; | |
| /* | |
| * B-Channels | |
| */ | |
| int nbchan; | |
| struct capidrv_bchan { | |
| struct capidrv_contr *contr; | |
| u8 msn[ISDN_MSNLEN]; | |
| int l2; | |
| int l3; | |
| u8 num[ISDN_MSNLEN]; | |
| u8 mynum[ISDN_MSNLEN]; | |
| int si1; | |
| int si2; | |
| int incoming; | |
| int disconnecting; | |
| struct capidrv_plci { | |
| struct capidrv_plci *next; | |
| u32 plci; | |
| u32 ncci; /* ncci for CONNECT_ACTIVE_IND */ | |
| u16 msgid; /* to identfy CONNECT_CONF */ | |
| int chan; | |
| int state; | |
| int leasedline; | |
| struct capidrv_ncci { | |
| struct capidrv_ncci *next; | |
| struct capidrv_plci *plcip; | |
| u32 ncci; | |
| u16 msgid; /* to identfy CONNECT_B3_CONF */ | |
| int chan; | |
| int state; | |
| int oldstate; | |
| /* */ | |
| u16 datahandle; | |
| struct ncci_datahandle_queue { | |
| struct ncci_datahandle_queue *next; | |
| u16 datahandle; | |
| int len; | |
| } *ackqueue; | |
| } *ncci_list; | |
| } *plcip; | |
| struct capidrv_ncci *nccip; | |
| } *bchans; | |
| struct capidrv_plci *plci_list; | |
| /* for q931 data */ | |
| u8 q931_buf[4096]; | |
| u8 *q931_read; | |
| u8 *q931_write; | |
| u8 *q931_end; | |
| }; | |
| struct capidrv_data { | |
| struct capi20_appl ap; | |
| int ncontr; | |
| struct capidrv_contr *contr_list; | |
| }; | |
| typedef struct capidrv_plci capidrv_plci; | |
| typedef struct capidrv_ncci capidrv_ncci; | |
| typedef struct capidrv_contr capidrv_contr; | |
| typedef struct capidrv_data capidrv_data; | |
| typedef struct capidrv_bchan capidrv_bchan; | |
| /* -------- data definitions ----------------------------------------- */ | |
| static capidrv_data global; | |
| static DEFINE_SPINLOCK(global_lock); | |
| static void handle_dtrace_data(capidrv_contr *card, | |
| int send, int level2, u8 *data, u16 len); | |
| /* -------- convert functions ---------------------------------------- */ | |
| static inline u32 b1prot(int l2, int l3) | |
| { | |
| switch (l2) { | |
| case ISDN_PROTO_L2_X75I: | |
| case ISDN_PROTO_L2_X75UI: | |
| case ISDN_PROTO_L2_X75BUI: | |
| return 0; | |
| case ISDN_PROTO_L2_HDLC: | |
| default: | |
| return 0; | |
| case ISDN_PROTO_L2_TRANS: | |
| return 1; | |
| case ISDN_PROTO_L2_V11096: | |
| case ISDN_PROTO_L2_V11019: | |
| case ISDN_PROTO_L2_V11038: | |
| return 2; | |
| case ISDN_PROTO_L2_FAX: | |
| return 4; | |
| case ISDN_PROTO_L2_MODEM: | |
| return 8; | |
| } | |
| } | |
| static inline u32 b2prot(int l2, int l3) | |
| { | |
| switch (l2) { | |
| case ISDN_PROTO_L2_X75I: | |
| case ISDN_PROTO_L2_X75UI: | |
| case ISDN_PROTO_L2_X75BUI: | |
| default: | |
| return 0; | |
| case ISDN_PROTO_L2_HDLC: | |
| case ISDN_PROTO_L2_TRANS: | |
| case ISDN_PROTO_L2_V11096: | |
| case ISDN_PROTO_L2_V11019: | |
| case ISDN_PROTO_L2_V11038: | |
| case ISDN_PROTO_L2_MODEM: | |
| return 1; | |
| case ISDN_PROTO_L2_FAX: | |
| return 4; | |
| } | |
| } | |
| static inline u32 b3prot(int l2, int l3) | |
| { | |
| switch (l2) { | |
| case ISDN_PROTO_L2_X75I: | |
| case ISDN_PROTO_L2_X75UI: | |
| case ISDN_PROTO_L2_X75BUI: | |
| case ISDN_PROTO_L2_HDLC: | |
| case ISDN_PROTO_L2_TRANS: | |
| case ISDN_PROTO_L2_V11096: | |
| case ISDN_PROTO_L2_V11019: | |
| case ISDN_PROTO_L2_V11038: | |
| case ISDN_PROTO_L2_MODEM: | |
| default: | |
| return 0; | |
| case ISDN_PROTO_L2_FAX: | |
| return 4; | |
| } | |
| } | |
| static _cstruct b1config_async_v110(u16 rate) | |
| { | |
| /* CAPI-Spec "B1 Configuration" */ | |
| static unsigned char buf[9]; | |
| buf[0] = 8; /* len */ | |
| /* maximum bitrate */ | |
| buf[1] = rate & 0xff; buf[2] = (rate >> 8) & 0xff; | |
| buf[3] = 8; buf[4] = 0; /* 8 bits per character */ | |
| buf[5] = 0; buf[6] = 0; /* parity none */ | |
| buf[7] = 0; buf[8] = 0; /* 1 stop bit */ | |
| return buf; | |
| } | |
| static _cstruct b1config(int l2, int l3) | |
| { | |
| switch (l2) { | |
| case ISDN_PROTO_L2_X75I: | |
| case ISDN_PROTO_L2_X75UI: | |
| case ISDN_PROTO_L2_X75BUI: | |
| case ISDN_PROTO_L2_HDLC: | |
| case ISDN_PROTO_L2_TRANS: | |
| default: | |
| return NULL; | |
| case ISDN_PROTO_L2_V11096: | |
| return b1config_async_v110(9600); | |
| case ISDN_PROTO_L2_V11019: | |
| return b1config_async_v110(19200); | |
| case ISDN_PROTO_L2_V11038: | |
| return b1config_async_v110(38400); | |
| } | |
| } | |
| static inline u16 si2cip(u8 si1, u8 si2) | |
| { | |
| static const u8 cip[17][5] = | |
| { | |
| /* 0 1 2 3 4 */ | |
| {0, 0, 0, 0, 0}, /*0 */ | |
| {16, 16, 4, 26, 16}, /*1 */ | |
| {17, 17, 17, 4, 4}, /*2 */ | |
| {2, 2, 2, 2, 2}, /*3 */ | |
| {18, 18, 18, 18, 18}, /*4 */ | |
| {2, 2, 2, 2, 2}, /*5 */ | |
| {0, 0, 0, 0, 0}, /*6 */ | |
| {2, 2, 2, 2, 2}, /*7 */ | |
| {2, 2, 2, 2, 2}, /*8 */ | |
| {21, 21, 21, 21, 21}, /*9 */ | |
| {19, 19, 19, 19, 19}, /*10 */ | |
| {0, 0, 0, 0, 0}, /*11 */ | |
| {0, 0, 0, 0, 0}, /*12 */ | |
| {0, 0, 0, 0, 0}, /*13 */ | |
| {0, 0, 0, 0, 0}, /*14 */ | |
| {22, 22, 22, 22, 22}, /*15 */ | |
| {27, 27, 27, 28, 27} /*16 */ | |
| }; | |
| if (si1 > 16) | |
| si1 = 0; | |
| if (si2 > 4) | |
| si2 = 0; | |
| return (u16) cip[si1][si2]; | |
| } | |
| static inline u8 cip2si1(u16 cipval) | |
| { | |
| static const u8 si[32] = | |
| {7, 1, 7, 7, 1, 1, 7, 7, /*0-7 */ | |
| 7, 1, 0, 0, 0, 0, 0, 0, /*8-15 */ | |
| 1, 2, 4, 10, 9, 9, 15, 7, /*16-23 */ | |
| 7, 7, 1, 16, 16, 0, 0, 0}; /*24-31 */ | |
| if (cipval > 31) | |
| cipval = 0; /* .... */ | |
| return si[cipval]; | |
| } | |
| static inline u8 cip2si2(u16 cipval) | |
| { | |
| static const u8 si[32] = | |
| {0, 0, 0, 0, 2, 3, 0, 0, /*0-7 */ | |
| 0, 3, 0, 0, 0, 0, 0, 0, /*8-15 */ | |
| 1, 2, 0, 0, 9, 0, 0, 0, /*16-23 */ | |
| 0, 0, 3, 2, 3, 0, 0, 0}; /*24-31 */ | |
| if (cipval > 31) | |
| cipval = 0; /* .... */ | |
| return si[cipval]; | |
| } | |
| /* -------- controller management ------------------------------------- */ | |
| static inline capidrv_contr *findcontrbydriverid(int driverid) | |
| { | |
| unsigned long flags; | |
| capidrv_contr *p; | |
| spin_lock_irqsave(&global_lock, flags); | |
| for (p = global.contr_list; p; p = p->next) | |
| if (p->myid == driverid) | |
| break; | |
| spin_unlock_irqrestore(&global_lock, flags); | |
| return p; | |
| } | |
| static capidrv_contr *findcontrbynumber(u32 contr) | |
| { | |
| unsigned long flags; | |
| capidrv_contr *p = global.contr_list; | |
| spin_lock_irqsave(&global_lock, flags); | |
| for (p = global.contr_list; p; p = p->next) | |
| if (p->contrnr == contr) | |
| break; | |
| spin_unlock_irqrestore(&global_lock, flags); | |
| return p; | |
| } | |
| /* -------- plci management ------------------------------------------ */ | |
| static capidrv_plci *new_plci(capidrv_contr *card, int chan) | |
| { | |
| capidrv_plci *plcip; | |
| plcip = kzalloc(sizeof(capidrv_plci), GFP_ATOMIC); | |
| if (plcip == NULL) | |
| return NULL; | |
| plcip->state = ST_PLCI_NONE; | |
| plcip->plci = 0; | |
| plcip->msgid = 0; | |
| plcip->chan = chan; | |
| plcip->next = card->plci_list; | |
| card->plci_list = plcip; | |
| card->bchans[chan].plcip = plcip; | |
| return plcip; | |
| } | |
| static capidrv_plci *find_plci_by_plci(capidrv_contr *card, u32 plci) | |
| { | |
| capidrv_plci *p; | |
| for (p = card->plci_list; p; p = p->next) | |
| if (p->plci == plci) | |
| return p; | |
| return NULL; | |
| } | |
| static capidrv_plci *find_plci_by_msgid(capidrv_contr *card, u16 msgid) | |
| { | |
| capidrv_plci *p; | |
| for (p = card->plci_list; p; p = p->next) | |
| if (p->msgid == msgid) | |
| return p; | |
| return NULL; | |
| } | |
| static capidrv_plci *find_plci_by_ncci(capidrv_contr *card, u32 ncci) | |
| { | |
| capidrv_plci *p; | |
| for (p = card->plci_list; p; p = p->next) | |
| if (p->plci == (ncci & 0xffff)) | |
| return p; | |
| return NULL; | |
| } | |
| static void free_plci(capidrv_contr *card, capidrv_plci *plcip) | |
| { | |
| capidrv_plci **pp; | |
| for (pp = &card->plci_list; *pp; pp = &(*pp)->next) { | |
| if (*pp == plcip) { | |
| *pp = (*pp)->next; | |
| card->bchans[plcip->chan].plcip = NULL; | |
| card->bchans[plcip->chan].disconnecting = 0; | |
| card->bchans[plcip->chan].incoming = 0; | |
| kfree(plcip); | |
| return; | |
| } | |
| } | |
| printk(KERN_ERR "capidrv-%d: free_plci %p (0x%x) not found, Huh?\n", | |
| card->contrnr, plcip, plcip->plci); | |
| } | |
| /* -------- ncci management ------------------------------------------ */ | |
| static inline capidrv_ncci *new_ncci(capidrv_contr *card, | |
| capidrv_plci *plcip, | |
| u32 ncci) | |
| { | |
| capidrv_ncci *nccip; | |
| nccip = kzalloc(sizeof(capidrv_ncci), GFP_ATOMIC); | |
| if (nccip == NULL) | |
| return NULL; | |
| nccip->ncci = ncci; | |
| nccip->state = ST_NCCI_NONE; | |
| nccip->plcip = plcip; | |
| nccip->chan = plcip->chan; | |
| nccip->datahandle = 0; | |
| nccip->next = plcip->ncci_list; | |
| plcip->ncci_list = nccip; | |
| card->bchans[plcip->chan].nccip = nccip; | |
| return nccip; | |
| } | |
| static inline capidrv_ncci *find_ncci(capidrv_contr *card, u32 ncci) | |
| { | |
| capidrv_plci *plcip; | |
| capidrv_ncci *p; | |
| if ((plcip = find_plci_by_ncci(card, ncci)) == NULL) | |
| return NULL; | |
| for (p = plcip->ncci_list; p; p = p->next) | |
| if (p->ncci == ncci) | |
| return p; | |
| return NULL; | |
| } | |
| static inline capidrv_ncci *find_ncci_by_msgid(capidrv_contr *card, | |
| u32 ncci, u16 msgid) | |
| { | |
| capidrv_plci *plcip; | |
| capidrv_ncci *p; | |
| if ((plcip = find_plci_by_ncci(card, ncci)) == NULL) | |
| return NULL; | |
| for (p = plcip->ncci_list; p; p = p->next) | |
| if (p->msgid == msgid) | |
| return p; | |
| return NULL; | |
| } | |
| static void free_ncci(capidrv_contr *card, struct capidrv_ncci *nccip) | |
| { | |
| struct capidrv_ncci **pp; | |
| for (pp = &(nccip->plcip->ncci_list); *pp; pp = &(*pp)->next) { | |
| if (*pp == nccip) { | |
| *pp = (*pp)->next; | |
| break; | |
| } | |
| } | |
| card->bchans[nccip->chan].nccip = NULL; | |
| kfree(nccip); | |
| } | |
| static int capidrv_add_ack(struct capidrv_ncci *nccip, | |
| u16 datahandle, int len) | |
| { | |
| struct ncci_datahandle_queue *n, **pp; | |
| n = kmalloc(sizeof(struct ncci_datahandle_queue), GFP_ATOMIC); | |
| if (!n) { | |
| printk(KERN_ERR "capidrv: kmalloc ncci_datahandle failed\n"); | |
| return -1; | |
| } | |
| n->next = NULL; | |
| n->datahandle = datahandle; | |
| n->len = len; | |
| for (pp = &nccip->ackqueue; *pp; pp = &(*pp)->next); | |
| *pp = n; | |
| return 0; | |
| } | |
| static int capidrv_del_ack(struct capidrv_ncci *nccip, u16 datahandle) | |
| { | |
| struct ncci_datahandle_queue **pp, *p; | |
| int len; | |
| for (pp = &nccip->ackqueue; *pp; pp = &(*pp)->next) { | |
| if ((*pp)->datahandle == datahandle) { | |
| p = *pp; | |
| len = p->len; | |
| *pp = (*pp)->next; | |
| kfree(p); | |
| return len; | |
| } | |
| } | |
| return -1; | |
| } | |
| /* -------- convert and send capi message ---------------------------- */ | |
| static void send_message(capidrv_contr *card, _cmsg *cmsg) | |
| { | |
| struct sk_buff *skb; | |
| size_t len; | |
| if (capi_cmsg2message(cmsg, cmsg->buf)) { | |
| printk(KERN_ERR "capidrv::send_message: parser failure\n"); | |
| return; | |
| } | |
| len = CAPIMSG_LEN(cmsg->buf); | |
| skb = alloc_skb(len, GFP_ATOMIC); | |
| if (!skb) { | |
| printk(KERN_ERR "capidrv::send_message: can't allocate mem\n"); | |
| return; | |
| } | |
| memcpy(skb_put(skb, len), cmsg->buf, len); | |
| if (capi20_put_message(&global.ap, skb) != CAPI_NOERROR) | |
| kfree_skb(skb); | |
| } | |
| /* -------- state machine -------------------------------------------- */ | |
| struct listenstatechange { | |
| int actstate; | |
| int nextstate; | |
| int event; | |
| }; | |
| static struct listenstatechange listentable[] = | |
| { | |
| {ST_LISTEN_NONE, ST_LISTEN_WAIT_CONF, EV_LISTEN_REQ}, | |
| {ST_LISTEN_ACTIVE, ST_LISTEN_ACTIVE_WAIT_CONF, EV_LISTEN_REQ}, | |
| {ST_LISTEN_WAIT_CONF, ST_LISTEN_NONE, EV_LISTEN_CONF_ERROR}, | |
| {ST_LISTEN_ACTIVE_WAIT_CONF, ST_LISTEN_ACTIVE, EV_LISTEN_CONF_ERROR}, | |
| {ST_LISTEN_WAIT_CONF, ST_LISTEN_NONE, EV_LISTEN_CONF_EMPTY}, | |
| {ST_LISTEN_ACTIVE_WAIT_CONF, ST_LISTEN_NONE, EV_LISTEN_CONF_EMPTY}, | |
| {ST_LISTEN_WAIT_CONF, ST_LISTEN_ACTIVE, EV_LISTEN_CONF_OK}, | |
| {ST_LISTEN_ACTIVE_WAIT_CONF, ST_LISTEN_ACTIVE, EV_LISTEN_CONF_OK}, | |
| {}, | |
| }; | |
| static void listen_change_state(capidrv_contr *card, int event) | |
| { | |
| struct listenstatechange *p = listentable; | |
| while (p->event) { | |
| if (card->state == p->actstate && p->event == event) { | |
| if (debugmode) | |
| printk(KERN_DEBUG "capidrv-%d: listen_change_state %d -> %d\n", | |
| card->contrnr, card->state, p->nextstate); | |
| card->state = p->nextstate; | |
| return; | |
| } | |
| p++; | |
| } | |
| printk(KERN_ERR "capidrv-%d: listen_change_state state=%d event=%d ????\n", | |
| card->contrnr, card->state, event); | |
| } | |
| /* ------------------------------------------------------------------ */ | |
| static void p0(capidrv_contr *card, capidrv_plci *plci) | |
| { | |
| isdn_ctrl cmd; | |
| card->bchans[plci->chan].contr = NULL; | |
| cmd.command = ISDN_STAT_DHUP; | |
| cmd.driver = card->myid; | |
| cmd.arg = plci->chan; | |
| card->interface.statcallb(&cmd); | |
| free_plci(card, plci); | |
| } | |
| /* ------------------------------------------------------------------ */ | |
| struct plcistatechange { | |
| int actstate; | |
| int nextstate; | |
| int event; | |
| void (*changefunc)(capidrv_contr *card, capidrv_plci *plci); | |
| }; | |
| static struct plcistatechange plcitable[] = | |
| { | |
| /* P-0 */ | |
| {ST_PLCI_NONE, ST_PLCI_OUTGOING, EV_PLCI_CONNECT_REQ, NULL}, | |
| {ST_PLCI_NONE, ST_PLCI_ALLOCATED, EV_PLCI_FACILITY_IND_UP, NULL}, | |
| {ST_PLCI_NONE, ST_PLCI_INCOMING, EV_PLCI_CONNECT_IND, NULL}, | |
| {ST_PLCI_NONE, ST_PLCI_RESUMEING, EV_PLCI_RESUME_REQ, NULL}, | |
| /* P-0.1 */ | |
| {ST_PLCI_OUTGOING, ST_PLCI_NONE, EV_PLCI_CONNECT_CONF_ERROR, p0}, | |
| {ST_PLCI_OUTGOING, ST_PLCI_ALLOCATED, EV_PLCI_CONNECT_CONF_OK, NULL}, | |
| /* P-1 */ | |
| {ST_PLCI_ALLOCATED, ST_PLCI_ACTIVE, EV_PLCI_CONNECT_ACTIVE_IND, NULL}, | |
| {ST_PLCI_ALLOCATED, ST_PLCI_DISCONNECTING, EV_PLCI_DISCONNECT_REQ, NULL}, | |
| {ST_PLCI_ALLOCATED, ST_PLCI_DISCONNECTING, EV_PLCI_FACILITY_IND_DOWN, NULL}, | |
| {ST_PLCI_ALLOCATED, ST_PLCI_DISCONNECTED, EV_PLCI_DISCONNECT_IND, NULL}, | |
| /* P-ACT */ | |
| {ST_PLCI_ACTIVE, ST_PLCI_DISCONNECTING, EV_PLCI_DISCONNECT_REQ, NULL}, | |
| {ST_PLCI_ACTIVE, ST_PLCI_DISCONNECTING, EV_PLCI_FACILITY_IND_DOWN, NULL}, | |
| {ST_PLCI_ACTIVE, ST_PLCI_DISCONNECTED, EV_PLCI_DISCONNECT_IND, NULL}, | |
| {ST_PLCI_ACTIVE, ST_PLCI_HELD, EV_PLCI_HOLD_IND, NULL}, | |
| {ST_PLCI_ACTIVE, ST_PLCI_DISCONNECTING, EV_PLCI_SUSPEND_IND, NULL}, | |
| /* P-2 */ | |
| {ST_PLCI_INCOMING, ST_PLCI_DISCONNECTING, EV_PLCI_CONNECT_REJECT, NULL}, | |
| {ST_PLCI_INCOMING, ST_PLCI_FACILITY_IND, EV_PLCI_FACILITY_IND_UP, NULL}, | |
| {ST_PLCI_INCOMING, ST_PLCI_ACCEPTING, EV_PLCI_CONNECT_RESP, NULL}, | |
| {ST_PLCI_INCOMING, ST_PLCI_DISCONNECTING, EV_PLCI_DISCONNECT_REQ, NULL}, | |
| {ST_PLCI_INCOMING, ST_PLCI_DISCONNECTING, EV_PLCI_FACILITY_IND_DOWN, NULL}, | |
| {ST_PLCI_INCOMING, ST_PLCI_DISCONNECTED, EV_PLCI_DISCONNECT_IND, NULL}, | |
| {ST_PLCI_INCOMING, ST_PLCI_DISCONNECTING, EV_PLCI_CD_IND, NULL}, | |
| /* P-3 */ | |
| {ST_PLCI_FACILITY_IND, ST_PLCI_DISCONNECTING, EV_PLCI_CONNECT_REJECT, NULL}, | |
| {ST_PLCI_FACILITY_IND, ST_PLCI_ACCEPTING, EV_PLCI_CONNECT_ACTIVE_IND, NULL}, | |
| {ST_PLCI_FACILITY_IND, ST_PLCI_DISCONNECTING, EV_PLCI_DISCONNECT_REQ, NULL}, | |
| {ST_PLCI_FACILITY_IND, ST_PLCI_DISCONNECTING, EV_PLCI_FACILITY_IND_DOWN, NULL}, | |
| {ST_PLCI_FACILITY_IND, ST_PLCI_DISCONNECTED, EV_PLCI_DISCONNECT_IND, NULL}, | |
| /* P-4 */ | |
| {ST_PLCI_ACCEPTING, ST_PLCI_ACTIVE, EV_PLCI_CONNECT_ACTIVE_IND, NULL}, | |
| {ST_PLCI_ACCEPTING, ST_PLCI_DISCONNECTING, EV_PLCI_DISCONNECT_REQ, NULL}, | |
| {ST_PLCI_ACCEPTING, ST_PLCI_DISCONNECTING, EV_PLCI_FACILITY_IND_DOWN, NULL}, | |
| {ST_PLCI_ACCEPTING, ST_PLCI_DISCONNECTED, EV_PLCI_DISCONNECT_IND, NULL}, | |
| /* P-5 */ | |
| {ST_PLCI_DISCONNECTING, ST_PLCI_DISCONNECTED, EV_PLCI_DISCONNECT_IND, NULL}, | |
| /* P-6 */ | |
| {ST_PLCI_DISCONNECTED, ST_PLCI_NONE, EV_PLCI_DISCONNECT_RESP, p0}, | |
| /* P-0.Res */ | |
| {ST_PLCI_RESUMEING, ST_PLCI_NONE, EV_PLCI_RESUME_CONF_ERROR, p0}, | |
| {ST_PLCI_RESUMEING, ST_PLCI_RESUME, EV_PLCI_RESUME_CONF_OK, NULL}, | |
| /* P-RES */ | |
| {ST_PLCI_RESUME, ST_PLCI_ACTIVE, EV_PLCI_RESUME_IND, NULL}, | |
| /* P-HELD */ | |
| {ST_PLCI_HELD, ST_PLCI_ACTIVE, EV_PLCI_RETRIEVE_IND, NULL}, | |
| {}, | |
| }; | |
| static void plci_change_state(capidrv_contr *card, capidrv_plci *plci, int event) | |
| { | |
| struct plcistatechange *p = plcitable; | |
| while (p->event) { | |
| if (plci->state == p->actstate && p->event == event) { | |
| if (debugmode) | |
| printk(KERN_DEBUG "capidrv-%d: plci_change_state:0x%x %d -> %d\n", | |
| card->contrnr, plci->plci, plci->state, p->nextstate); | |
| plci->state = p->nextstate; | |
| if (p->changefunc) | |
| p->changefunc(card, plci); | |
| return; | |
| } | |
| p++; | |
| } | |
| printk(KERN_ERR "capidrv-%d: plci_change_state:0x%x state=%d event=%d ????\n", | |
| card->contrnr, plci->plci, plci->state, event); | |
| } | |
| /* ------------------------------------------------------------------ */ | |
| static _cmsg cmsg; | |
| static void n0(capidrv_contr *card, capidrv_ncci *ncci) | |
| { | |
| isdn_ctrl cmd; | |
| capi_fill_DISCONNECT_REQ(&cmsg, | |
| global.ap.applid, | |
| card->msgid++, | |
| ncci->plcip->plci, | |
| NULL, /* BChannelinformation */ | |
| NULL, /* Keypadfacility */ | |
| NULL, /* Useruserdata */ /* $$$$ */ | |
| NULL /* Facilitydataarray */ | |
| ); | |
| plci_change_state(card, ncci->plcip, EV_PLCI_DISCONNECT_REQ); | |
| send_message(card, &cmsg); | |
| cmd.command = ISDN_STAT_BHUP; | |
| cmd.driver = card->myid; | |
| cmd.arg = ncci->chan; | |
| card->interface.statcallb(&cmd); | |
| free_ncci(card, ncci); | |
| } | |
| /* ------------------------------------------------------------------ */ | |
| struct nccistatechange { | |
| int actstate; | |
| int nextstate; | |
| int event; | |
| void (*changefunc)(capidrv_contr *card, capidrv_ncci *ncci); | |
| }; | |
| static struct nccistatechange nccitable[] = | |
| { | |
| /* N-0 */ | |
| {ST_NCCI_NONE, ST_NCCI_OUTGOING, EV_NCCI_CONNECT_B3_REQ, NULL}, | |
| {ST_NCCI_NONE, ST_NCCI_INCOMING, EV_NCCI_CONNECT_B3_IND, NULL}, | |
| /* N-0.1 */ | |
| {ST_NCCI_OUTGOING, ST_NCCI_ALLOCATED, EV_NCCI_CONNECT_B3_CONF_OK, NULL}, | |
| {ST_NCCI_OUTGOING, ST_NCCI_NONE, EV_NCCI_CONNECT_B3_CONF_ERROR, n0}, | |
| /* N-1 */ | |
| {ST_NCCI_INCOMING, ST_NCCI_DISCONNECTING, EV_NCCI_CONNECT_B3_REJECT, NULL}, | |
| {ST_NCCI_INCOMING, ST_NCCI_ALLOCATED, EV_NCCI_CONNECT_B3_RESP, NULL}, | |
| {ST_NCCI_INCOMING, ST_NCCI_DISCONNECTED, EV_NCCI_DISCONNECT_B3_IND, NULL}, | |
| {ST_NCCI_INCOMING, ST_NCCI_DISCONNECTING, EV_NCCI_DISCONNECT_B3_REQ, NULL}, | |
| /* N-2 */ | |
| {ST_NCCI_ALLOCATED, ST_NCCI_ACTIVE, EV_NCCI_CONNECT_B3_ACTIVE_IND, NULL}, | |
| {ST_NCCI_ALLOCATED, ST_NCCI_DISCONNECTED, EV_NCCI_DISCONNECT_B3_IND, NULL}, | |
| {ST_NCCI_ALLOCATED, ST_NCCI_DISCONNECTING, EV_NCCI_DISCONNECT_B3_REQ, NULL}, | |
| /* N-ACT */ | |
| {ST_NCCI_ACTIVE, ST_NCCI_ACTIVE, EV_NCCI_RESET_B3_IND, NULL}, | |
| {ST_NCCI_ACTIVE, ST_NCCI_RESETING, EV_NCCI_RESET_B3_REQ, NULL}, | |
| {ST_NCCI_ACTIVE, ST_NCCI_DISCONNECTED, EV_NCCI_DISCONNECT_B3_IND, NULL}, | |
| {ST_NCCI_ACTIVE, ST_NCCI_DISCONNECTING, EV_NCCI_DISCONNECT_B3_REQ, NULL}, | |
| /* N-3 */ | |
| {ST_NCCI_RESETING, ST_NCCI_ACTIVE, EV_NCCI_RESET_B3_IND, NULL}, | |
| {ST_NCCI_RESETING, ST_NCCI_DISCONNECTED, EV_NCCI_DISCONNECT_B3_IND, NULL}, | |
| {ST_NCCI_RESETING, ST_NCCI_DISCONNECTING, EV_NCCI_DISCONNECT_B3_REQ, NULL}, | |
| /* N-4 */ | |
| {ST_NCCI_DISCONNECTING, ST_NCCI_DISCONNECTED, EV_NCCI_DISCONNECT_B3_IND, NULL}, | |
| {ST_NCCI_DISCONNECTING, ST_NCCI_PREVIOUS, EV_NCCI_DISCONNECT_B3_CONF_ERROR, NULL}, | |
| /* N-5 */ | |
| {ST_NCCI_DISCONNECTED, ST_NCCI_NONE, EV_NCCI_DISCONNECT_B3_RESP, n0}, | |
| {}, | |
| }; | |
| static void ncci_change_state(capidrv_contr *card, capidrv_ncci *ncci, int event) | |
| { | |
| struct nccistatechange *p = nccitable; | |
| while (p->event) { | |
| if (ncci->state == p->actstate && p->event == event) { | |
| if (debugmode) | |
| printk(KERN_DEBUG "capidrv-%d: ncci_change_state:0x%x %d -> %d\n", | |
| card->contrnr, ncci->ncci, ncci->state, p->nextstate); | |
| if (p->nextstate == ST_NCCI_PREVIOUS) { | |
| ncci->state = ncci->oldstate; | |
| ncci->oldstate = p->actstate; | |
| } else { | |
| ncci->oldstate = p->actstate; | |
| ncci->state = p->nextstate; | |
| } | |
| if (p->changefunc) | |
| p->changefunc(card, ncci); | |
| return; | |
| } | |
| p++; | |
| } | |
| printk(KERN_ERR "capidrv-%d: ncci_change_state:0x%x state=%d event=%d ????\n", | |
| card->contrnr, ncci->ncci, ncci->state, event); | |
| } | |
| /* ------------------------------------------------------------------- */ | |
| static inline int new_bchan(capidrv_contr *card) | |
| { | |
| int i; | |
| for (i = 0; i < card->nbchan; i++) { | |
| if (card->bchans[i].plcip == NULL) { | |
| card->bchans[i].disconnecting = 0; | |
| return i; | |
| } | |
| } | |
| return -1; | |
| } | |
| /* ------------------------------------------------------------------- */ | |
| static char *capi_info2str(u16 reason) | |
| { | |
| #ifndef CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE | |
| return ".."; | |
| #else | |
| switch (reason) { | |
| /*-- informative values (corresponding message was processed) -----*/ | |
| case 0x0001: | |
| return "NCPI not supported by current protocol, NCPI ignored"; | |
| case 0x0002: | |
| return "Flags not supported by current protocol, flags ignored"; | |
| case 0x0003: | |
| return "Alert already sent by another application"; | |
| /*-- error information concerning CAPI_REGISTER -----*/ | |
| case 0x1001: | |
| return "Too many applications"; | |
| case 0x1002: | |
| return "Logical block size too small, must be at least 128 Bytes"; | |
| case 0x1003: | |
| return "Buffer exceeds 64 kByte"; | |
| case 0x1004: | |
| return "Message buffer size too small, must be at least 1024 Bytes"; | |
| case 0x1005: | |
| return "Max. number of logical connections not supported"; | |
| case 0x1006: | |
| return "Reserved"; | |
| case 0x1007: | |
| return "The message could not be accepted because of an internal busy condition"; | |
| case 0x1008: | |
| return "OS resource error (no memory ?)"; | |
| case 0x1009: | |
| return "CAPI not installed"; | |
| case 0x100A: | |
| return "Controller does not support external equipment"; | |
| case 0x100B: | |
| return "Controller does only support external equipment"; | |
| /*-- error information concerning message exchange functions -----*/ | |
| case 0x1101: | |
| return "Illegal application number"; | |
| case 0x1102: | |
| return "Illegal command or subcommand or message length less than 12 bytes"; | |
| case 0x1103: | |
| return "The message could not be accepted because of a queue full condition !! The error code does not imply that CAPI cannot receive messages directed to another controller, PLCI or NCCI"; | |
| case 0x1104: | |
| return "Queue is empty"; | |
| case 0x1105: | |
| return "Queue overflow, a message was lost !! This indicates a configuration error. The only recovery from this error is to perform a CAPI_RELEASE"; | |
| case 0x1106: | |
| return "Unknown notification parameter"; | |
| case 0x1107: | |
| return "The Message could not be accepted because of an internal busy condition"; | |
| case 0x1108: | |
| return "OS Resource error (no memory ?)"; | |
| case 0x1109: | |
| return "CAPI not installed"; | |
| case 0x110A: | |
| return "Controller does not support external equipment"; | |
| case 0x110B: | |
| return "Controller does only support external equipment"; | |
| /*-- error information concerning resource / coding problems -----*/ | |
| case 0x2001: | |
| return "Message not supported in current state"; | |
| case 0x2002: | |
| return "Illegal Controller / PLCI / NCCI"; | |
| case 0x2003: | |
| return "Out of PLCI"; | |
| case 0x2004: | |
| return "Out of NCCI"; | |
| case 0x2005: | |
| return "Out of LISTEN"; | |
| case 0x2006: | |
| return "Out of FAX resources (protocol T.30)"; | |
| case 0x2007: | |
| return "Illegal message parameter coding"; | |
| /*-- error information concerning requested services -----*/ | |
| case 0x3001: | |
| return "B1 protocol not supported"; | |
| case 0x3002: | |
| return "B2 protocol not supported"; | |
| case 0x3003: | |
| return "B3 protocol not supported"; | |
| case 0x3004: | |
| return "B1 protocol parameter not supported"; | |
| case 0x3005: | |
| return "B2 protocol parameter not supported"; | |
| case 0x3006: | |
| return "B3 protocol parameter not supported"; | |
| case 0x3007: | |
| return "B protocol combination not supported"; | |
| case 0x3008: | |
| return "NCPI not supported"; | |
| case 0x3009: | |
| return "CIP Value unknown"; | |
| case 0x300A: | |
| return "Flags not supported (reserved bits)"; | |
| case 0x300B: | |
| return "Facility not supported"; | |
| case 0x300C: | |
| return "Data length not supported by current protocol"; | |
| case 0x300D: | |
| return "Reset procedure not supported by current protocol"; | |
| /*-- informations about the clearing of a physical connection -----*/ | |
| case 0x3301: | |
| return "Protocol error layer 1 (broken line or B-channel removed by signalling protocol)"; | |
| case 0x3302: | |
| return "Protocol error layer 2"; | |
| case 0x3303: | |
| return "Protocol error layer 3"; | |
| case 0x3304: | |
| return "Another application got that call"; | |
| /*-- T.30 specific reasons -----*/ | |
| case 0x3311: | |
| return "Connecting not successful (remote station is no FAX G3 machine)"; | |
| case 0x3312: | |
| return "Connecting not successful (training error)"; | |
| case 0x3313: | |
| return "Disconnected before transfer (remote station does not support transfer mode, e.g. resolution)"; | |
| case 0x3314: | |
| return "Disconnected during transfer (remote abort)"; | |
| case 0x3315: | |
| return "Disconnected during transfer (remote procedure error, e.g. unsuccessful repetition of T.30 commands)"; | |
| case 0x3316: | |
| return "Disconnected during transfer (local tx data underrun)"; | |
| case 0x3317: | |
| return "Disconnected during transfer (local rx data overflow)"; | |
| case 0x3318: | |
| return "Disconnected during transfer (local abort)"; | |
| case 0x3319: | |
| return "Illegal parameter coding (e.g. SFF coding error)"; | |
| /*-- disconnect causes from the network according to ETS 300 102-1/Q.931 -----*/ | |
| case 0x3481: return "Unallocated (unassigned) number"; | |
| case 0x3482: return "No route to specified transit network"; | |
| case 0x3483: return "No route to destination"; | |
| case 0x3486: return "Channel unacceptable"; | |
| case 0x3487: | |
| return "Call awarded and being delivered in an established channel"; | |
| case 0x3490: return "Normal call clearing"; | |
| case 0x3491: return "User busy"; | |
| case 0x3492: return "No user responding"; | |
| case 0x3493: return "No answer from user (user alerted)"; | |
| case 0x3495: return "Call rejected"; | |
| case 0x3496: return "Number changed"; | |
| case 0x349A: return "Non-selected user clearing"; | |
| case 0x349B: return "Destination out of order"; | |
| case 0x349C: return "Invalid number format"; | |
| case 0x349D: return "Facility rejected"; | |
| case 0x349E: return "Response to STATUS ENQUIRY"; | |
| case 0x349F: return "Normal, unspecified"; | |
| case 0x34A2: return "No circuit / channel available"; | |
| case 0x34A6: return "Network out of order"; | |
| case 0x34A9: return "Temporary failure"; | |
| case 0x34AA: return "Switching equipment congestion"; | |
| case 0x34AB: return "Access information discarded"; | |
| case 0x34AC: return "Requested circuit / channel not available"; | |
| case 0x34AF: return "Resources unavailable, unspecified"; | |
| case 0x34B1: return "Quality of service unavailable"; | |
| case 0x34B2: return "Requested facility not subscribed"; | |
| case 0x34B9: return "Bearer capability not authorized"; | |
| case 0x34BA: return "Bearer capability not presently available"; | |
| case 0x34BF: return "Service or option not available, unspecified"; | |
| case 0x34C1: return "Bearer capability not implemented"; | |
| case 0x34C2: return "Channel type not implemented"; | |
| case 0x34C5: return "Requested facility not implemented"; | |
| case 0x34C6: return "Only restricted digital information bearer capability is available"; | |
| case 0x34CF: return "Service or option not implemented, unspecified"; | |
| case 0x34D1: return "Invalid call reference value"; | |
| case 0x34D2: return "Identified channel does not exist"; | |
| case 0x34D3: return "A suspended call exists, but this call identity does not"; | |
| case 0x34D4: return "Call identity in use"; | |
| case 0x34D5: return "No call suspended"; | |
| case 0x34D6: return "Call having the requested call identity has been cleared"; | |
| case 0x34D8: return "Incompatible destination"; | |
| case 0x34DB: return "Invalid transit network selection"; | |
| case 0x34DF: return "Invalid message, unspecified"; | |
| case 0x34E0: return "Mandatory information element is missing"; | |
| case 0x34E1: return "Message type non-existent or not implemented"; | |
| case 0x34E2: return "Message not compatible with call state or message type non-existent or not implemented"; | |
| case 0x34E3: return "Information element non-existent or not implemented"; | |
| case 0x34E4: return "Invalid information element contents"; | |
| case 0x34E5: return "Message not compatible with call state"; | |
| case 0x34E6: return "Recovery on timer expiry"; | |
| case 0x34EF: return "Protocol error, unspecified"; | |
| case 0x34FF: return "Interworking, unspecified"; | |
| default: return "No additional information"; | |
| } | |
| #endif | |
| } | |
| static void handle_controller(_cmsg *cmsg) | |
| { | |
| capidrv_contr *card = findcontrbynumber(cmsg->adr.adrController & 0x7f); | |
| if (!card) { | |
| printk(KERN_ERR "capidrv: %s from unknown controller 0x%x\n", | |
| capi_cmd2str(cmsg->Command, cmsg->Subcommand), | |
| cmsg->adr.adrController & 0x7f); | |
| return; | |
| } | |
| switch (CAPICMD(cmsg->Command, cmsg->Subcommand)) { | |
| case CAPI_LISTEN_CONF: /* Controller */ | |
| if (debugmode) | |
| printk(KERN_DEBUG "capidrv-%d: listenconf Info=0x%4x (%s) cipmask=0x%x\n", | |
| card->contrnr, cmsg->Info, capi_info2str(cmsg->Info), card->cipmask); | |
| if (cmsg->Info) { | |
| listen_change_state(card, EV_LISTEN_CONF_ERROR); | |
| } else if (card->cipmask == 0) { | |
| listen_change_state(card, EV_LISTEN_CONF_EMPTY); | |
| } else { | |
| listen_change_state(card, EV_LISTEN_CONF_OK); | |
| } | |
| break; | |
| case CAPI_MANUFACTURER_IND: /* Controller */ | |
| if (cmsg->ManuID == 0x214D5641 | |
| && cmsg->Class == 0 | |
| && cmsg->Function == 1) { | |
| u8 *data = cmsg->ManuData + 3; | |
| u16 len = cmsg->ManuData[0]; | |
| u16 layer; | |
| int direction; | |
| if (len == 255) { | |
| len = (cmsg->ManuData[1] | (cmsg->ManuData[2] << 8)); | |
| data += 2; | |
| } | |
| len -= 2; | |
| layer = ((*(data - 1)) << 8) | *(data - 2); | |
| if (layer & 0x300) | |
| direction = (layer & 0x200) ? 0 : 1; | |
| else direction = (layer & 0x800) ? 0 : 1; | |
| if (layer & 0x0C00) { | |
| if ((layer & 0xff) == 0x80) { | |
| handle_dtrace_data(card, direction, 1, data, len); | |
| break; | |
| } | |
| } else if ((layer & 0xff) < 0x80) { | |
| handle_dtrace_data(card, direction, 0, data, len); | |
| break; | |
| } | |
| printk(KERN_INFO "capidrv-%d: %s from controller 0x%x layer 0x%x, ignored\n", | |
| card->contrnr, | |
| capi_cmd2str(cmsg->Command, cmsg->Subcommand), | |
| cmsg->adr.adrController, layer); | |
| break; | |
| } | |
| goto ignored; | |
| case CAPI_MANUFACTURER_CONF: /* Controller */ | |
| if (cmsg->ManuID == 0x214D5641) { | |
| char *s = NULL; | |
| switch (cmsg->Class) { | |
| case 0: break; | |
| case 1: s = "unknown class"; break; | |
| case 2: s = "unknown function"; break; | |
| default: s = "unknown error"; break; | |
| } | |
| if (s) | |
| printk(KERN_INFO "capidrv-%d: %s from controller 0x%x function %d: %s\n", | |
| card->contrnr, | |
| capi_cmd2str(cmsg->Command, cmsg->Subcommand), | |
| cmsg->adr.adrController, | |
| cmsg->Function, s); | |
| break; | |
| } | |
| goto ignored; | |
| case CAPI_FACILITY_IND: /* Controller/plci/ncci */ | |
| goto ignored; | |
| case CAPI_FACILITY_CONF: /* Controller/plci/ncci */ | |
| goto ignored; | |
| case CAPI_INFO_IND: /* Controller/plci */ | |
| goto ignored; | |
| case CAPI_INFO_CONF: /* Controller/plci */ | |
| goto ignored; | |
| default: | |
| printk(KERN_ERR "capidrv-%d: got %s from controller 0x%x ???", | |
| card->contrnr, | |
| capi_cmd2str(cmsg->Command, cmsg->Subcommand), | |
| cmsg->adr.adrController); | |
| } | |
| return; | |
| ignored: | |
| printk(KERN_INFO "capidrv-%d: %s from controller 0x%x ignored\n", | |
| card->contrnr, | |
| capi_cmd2str(cmsg->Command, cmsg->Subcommand), | |
| cmsg->adr.adrController); | |
| } | |
| static void handle_incoming_call(capidrv_contr *card, _cmsg *cmsg) | |
| { | |
| capidrv_plci *plcip; | |
| capidrv_bchan *bchan; | |
| isdn_ctrl cmd; | |
| int chan; | |
| if ((chan = new_bchan(card)) == -1) { | |
| printk(KERN_ERR "capidrv-%d: incoming call on not existing bchan ?\n", card->contrnr); | |
| return; | |
| } | |
| bchan = &card->bchans[chan]; | |
| if ((plcip = new_plci(card, chan)) == NULL) { | |
| printk(KERN_ERR "capidrv-%d: incoming call: no memory, sorry.\n", card->contrnr); | |
| return; | |
| } | |
| bchan->incoming = 1; | |
| plcip->plci = cmsg->adr.adrPLCI; | |
| plci_change_state(card, plcip, EV_PLCI_CONNECT_IND); | |
| cmd.command = ISDN_STAT_ICALL; | |
| cmd.driver = card->myid; | |
| cmd.arg = chan; | |
| memset(&cmd.parm.setup, 0, sizeof(cmd.parm.setup)); | |
| strncpy(cmd.parm.setup.phone, | |
| cmsg->CallingPartyNumber + 3, | |
| cmsg->CallingPartyNumber[0] - 2); | |
| strncpy(cmd.parm.setup.eazmsn, | |
| cmsg->CalledPartyNumber + 2, | |
| cmsg->CalledPartyNumber[0] - 1); | |
| cmd.parm.setup.si1 = cip2si1(cmsg->CIPValue); | |
| cmd.parm.setup.si2 = cip2si2(cmsg->CIPValue); | |
| cmd.parm.setup.plan = cmsg->CallingPartyNumber[1]; | |
| cmd.parm.setup.screen = cmsg->CallingPartyNumber[2]; | |
| printk(KERN_INFO "capidrv-%d: incoming call %s,%d,%d,%s\n", | |
| card->contrnr, | |
| cmd.parm.setup.phone, | |
| cmd.parm.setup.si1, | |
| cmd.parm.setup.si2, | |
| cmd.parm.setup.eazmsn); | |
| if (cmd.parm.setup.si1 == 1 && cmd.parm.setup.si2 != 0) { | |
| printk(KERN_INFO "capidrv-%d: patching si2=%d to 0 for VBOX\n", | |
| card->contrnr, | |
| cmd.parm.setup.si2); | |
| cmd.parm.setup.si2 = 0; | |
| } | |
| switch (card->interface.statcallb(&cmd)) { | |
| case 0: | |
| case 3: | |
| /* No device matching this call. | |
| * and isdn_common.c has send a HANGUP command | |
| * which is ignored in state ST_PLCI_INCOMING, | |
| * so we send RESP to ignore the call | |
| */ | |
| capi_cmsg_answer(cmsg); | |
| cmsg->Reject = 1; /* ignore */ | |
| plci_change_state(card, plcip, EV_PLCI_CONNECT_REJECT); | |
| send_message(card, cmsg); | |
| printk(KERN_INFO "capidrv-%d: incoming call %s,%d,%d,%s ignored\n", | |
| card->contrnr, | |
| cmd.parm.setup.phone, | |
| cmd.parm.setup.si1, | |
| cmd.parm.setup.si2, | |
| cmd.parm.setup.eazmsn); | |
| break; | |
| case 1: | |
| /* At least one device matching this call (RING on ttyI) | |
| * HL-driver may send ALERTING on the D-channel in this | |
| * case. | |
| * really means: RING on ttyI or a net interface | |
| * accepted this call already. | |
| * | |
| * If the call was accepted, state has already changed, | |
| * and CONNECT_RESP already sent. | |
| */ | |
| if (plcip->state == ST_PLCI_INCOMING) { | |
| printk(KERN_INFO "capidrv-%d: incoming call %s,%d,%d,%s tty alerting\n", | |
| card->contrnr, | |
| cmd.parm.setup.phone, | |
| cmd.parm.setup.si1, | |
| cmd.parm.setup.si2, | |
| cmd.parm.setup.eazmsn); | |
| capi_fill_ALERT_REQ(cmsg, | |
| global.ap.applid, | |
| card->msgid++, | |
| plcip->plci, /* adr */ | |
| NULL,/* BChannelinformation */ | |
| NULL,/* Keypadfacility */ | |
| NULL,/* Useruserdata */ | |
| NULL /* Facilitydataarray */ | |
| ); | |
| plcip->msgid = cmsg->Messagenumber; | |
| send_message(card, cmsg); | |
| } else { | |
| printk(KERN_INFO "capidrv-%d: incoming call %s,%d,%d,%s on netdev\n", | |
| card->contrnr, | |
| cmd.parm.setup.phone, | |
| cmd.parm.setup.si1, | |
| cmd.parm.setup.si2, | |
| cmd.parm.setup.eazmsn); | |
| } | |
| break; | |
| case 2: /* Call will be rejected. */ | |
| capi_cmsg_answer(cmsg); | |
| cmsg->Reject = 2; /* reject call, normal call clearing */ | |
| plci_change_state(card, plcip, EV_PLCI_CONNECT_REJECT); | |
| send_message(card, cmsg); | |
| break; | |
| default: | |
| /* An error happened. (Invalid parameters for example.) */ | |
| capi_cmsg_answer(cmsg); | |
| cmsg->Reject = 8; /* reject call, | |
| destination out of order */ | |
| plci_change_state(card, plcip, EV_PLCI_CONNECT_REJECT); | |
| send_message(card, cmsg); | |
| break; | |
| } | |
| return; | |
| } | |
| static void handle_plci(_cmsg *cmsg) | |
| { | |
| capidrv_contr *card = findcontrbynumber(cmsg->adr.adrController & 0x7f); | |
| capidrv_plci *plcip; | |
| isdn_ctrl cmd; | |
| _cdebbuf *cdb; | |
| if (!card) { | |
| printk(KERN_ERR "capidrv: %s from unknown controller 0x%x\n", | |
| capi_cmd2str(cmsg->Command, cmsg->Subcommand), | |
| cmsg->adr.adrController & 0x7f); | |
| return; | |
| } | |
| switch (CAPICMD(cmsg->Command, cmsg->Subcommand)) { | |
| case CAPI_DISCONNECT_IND: /* plci */ | |
| if (cmsg->Reason) { | |
| printk(KERN_INFO "capidrv-%d: %s reason 0x%x (%s) for plci 0x%x\n", | |
| card->contrnr, | |
| capi_cmd2str(cmsg->Command, cmsg->Subcommand), | |
| cmsg->Reason, capi_info2str(cmsg->Reason), cmsg->adr.adrPLCI); | |
| } | |
| if (!(plcip = find_plci_by_plci(card, cmsg->adr.adrPLCI))) { | |
| capi_cmsg_answer(cmsg); | |
| send_message(card, cmsg); | |
| goto notfound; | |
| } | |
| card->bchans[plcip->chan].disconnecting = 1; | |
| plci_change_state(card, plcip, EV_PLCI_DISCONNECT_IND); | |
| capi_cmsg_answer(cmsg); | |
| plci_change_state(card, plcip, EV_PLCI_DISCONNECT_RESP); | |
| send_message(card, cmsg); | |
| break; | |
| case CAPI_DISCONNECT_CONF: /* plci */ | |
| if (cmsg->Info) { | |
| printk(KERN_INFO "capidrv-%d: %s info 0x%x (%s) for plci 0x%x\n", | |
| card->contrnr, | |
| capi_cmd2str(cmsg->Command, cmsg->Subcommand), | |
| cmsg->Info, capi_info2str(cmsg->Info), | |
| cmsg->adr.adrPLCI); | |
| } | |
| if (!(plcip = find_plci_by_plci(card, cmsg->adr.adrPLCI))) | |
| goto notfound; | |
| card->bchans[plcip->chan].disconnecting = 1; | |
| break; | |
| case CAPI_ALERT_CONF: /* plci */ | |
| if (cmsg->Info) { | |
| printk(KERN_INFO "capidrv-%d: %s info 0x%x (%s) for plci 0x%x\n", | |
| card->contrnr, | |
| capi_cmd2str(cmsg->Command, cmsg->Subcommand), | |
| cmsg->Info, capi_info2str(cmsg->Info), | |
| cmsg->adr.adrPLCI); | |
| } | |
| break; | |
| case CAPI_CONNECT_IND: /* plci */ | |
| handle_incoming_call(card, cmsg); | |
| break; | |
| case CAPI_CONNECT_CONF: /* plci */ | |
| if (cmsg->Info) { | |
| printk(KERN_INFO "capidrv-%d: %s info 0x%x (%s) for plci 0x%x\n", | |
| card->contrnr, | |
| capi_cmd2str(cmsg->Command, cmsg->Subcommand), | |
| cmsg->Info, capi_info2str(cmsg->Info), | |
| cmsg->adr.adrPLCI); | |
| } | |
| if (!(plcip = find_plci_by_msgid(card, cmsg->Messagenumber))) | |
| goto notfound; | |
| plcip->plci = cmsg->adr.adrPLCI; | |
| if (cmsg->Info) { | |
| plci_change_state(card, plcip, EV_PLCI_CONNECT_CONF_ERROR); | |
| } else { | |
| plci_change_state(card, plcip, EV_PLCI_CONNECT_CONF_OK); | |
| } | |
| break; | |
| case CAPI_CONNECT_ACTIVE_IND: /* plci */ | |
| if (!(plcip = find_plci_by_plci(card, cmsg->adr.adrPLCI))) | |
| goto notfound; | |
| if (card->bchans[plcip->chan].incoming) { | |
| capi_cmsg_answer(cmsg); | |
| plci_change_state(card, plcip, EV_PLCI_CONNECT_ACTIVE_IND); | |
| send_message(card, cmsg); | |
| } else { | |
| capidrv_ncci *nccip; | |
| capi_cmsg_answer(cmsg); | |
| send_message(card, cmsg); | |
| nccip = new_ncci(card, plcip, cmsg->adr.adrPLCI); | |
| if (!nccip) { | |
| printk(KERN_ERR "capidrv-%d: no mem for ncci, sorry\n", card->contrnr); | |
| break; /* $$$$ */ | |
| } | |
| capi_fill_CONNECT_B3_REQ(cmsg, | |
| global.ap.applid, | |
| card->msgid++, | |
| plcip->plci, /* adr */ | |
| NULL /* NCPI */ | |
| ); | |
| nccip->msgid = cmsg->Messagenumber; | |
| plci_change_state(card, plcip, | |
| EV_PLCI_CONNECT_ACTIVE_IND); | |
| ncci_change_state(card, nccip, EV_NCCI_CONNECT_B3_REQ); | |
| send_message(card, cmsg); | |
| cmd.command = ISDN_STAT_DCONN; | |
| cmd.driver = card->myid; | |
| cmd.arg = plcip->chan; | |
| card->interface.statcallb(&cmd); | |
| } | |
| break; | |
| case CAPI_INFO_IND: /* Controller/plci */ | |
| if (!(plcip = find_plci_by_plci(card, cmsg->adr.adrPLCI))) | |
| goto notfound; | |
| if (cmsg->InfoNumber == 0x4000) { | |
| if (cmsg->InfoElement[0] == 4) { | |
| cmd.command = ISDN_STAT_CINF; | |
| cmd.driver = card->myid; | |
| cmd.arg = plcip->chan; | |
| sprintf(cmd.parm.num, "%lu", | |
| (unsigned long) | |
| ((u32) cmsg->InfoElement[1] | |
| | ((u32) (cmsg->InfoElement[2]) << 8) | |
| | ((u32) (cmsg->InfoElement[3]) << 16) | |
| | ((u32) (cmsg->InfoElement[4]) << 24))); | |
| card->interface.statcallb(&cmd); | |
| break; | |
| } | |
| } | |
| cdb = capi_cmsg2str(cmsg); | |
| if (cdb) { | |
| printk(KERN_WARNING "capidrv-%d: %s\n", | |
| card->contrnr, cdb->buf); | |
| cdebbuf_free(cdb); | |
| } else | |
| printk(KERN_WARNING "capidrv-%d: CAPI_INFO_IND InfoNumber %x not handled\n", | |
| card->contrnr, cmsg->InfoNumber); | |
| break; | |
| case CAPI_CONNECT_ACTIVE_CONF: /* plci */ | |
| goto ignored; | |
| case CAPI_SELECT_B_PROTOCOL_CONF: /* plci */ | |
| goto ignored; | |
| case CAPI_FACILITY_IND: /* Controller/plci/ncci */ | |
| goto ignored; | |
| case CAPI_FACILITY_CONF: /* Controller/plci/ncci */ | |
| goto ignored; | |
| case CAPI_INFO_CONF: /* Controller/plci */ | |
| goto ignored; | |
| default: | |
| printk(KERN_ERR "capidrv-%d: got %s for plci 0x%x ???", | |
| card->contrnr, | |
| capi_cmd2str(cmsg->Command, cmsg->Subcommand), | |
| cmsg->adr.adrPLCI); | |
| } | |
| return; | |
| ignored: | |
| printk(KERN_INFO "capidrv-%d: %s for plci 0x%x ignored\n", | |
| card->contrnr, | |
| capi_cmd2str(cmsg->Command, cmsg->Subcommand), | |
| cmsg->adr.adrPLCI); | |
| return; | |
| notfound: | |
| printk(KERN_ERR "capidrv-%d: %s: plci 0x%x not found\n", | |
| card->contrnr, | |
| capi_cmd2str(cmsg->Command, cmsg->Subcommand), | |
| cmsg->adr.adrPLCI); | |
| return; | |
| } | |
| static void handle_ncci(_cmsg *cmsg) | |
| { | |
| capidrv_contr *card = findcontrbynumber(cmsg->adr.adrController & 0x7f); | |
| capidrv_plci *plcip; | |
| capidrv_ncci *nccip; | |
| isdn_ctrl cmd; | |
| int len; | |
| if (!card) { | |
| printk(KERN_ERR "capidrv: %s from unknown controller 0x%x\n", | |
| capi_cmd2str(cmsg->Command, cmsg->Subcommand), | |
| cmsg->adr.adrController & 0x7f); | |
| return; | |
| } | |
| switch (CAPICMD(cmsg->Command, cmsg->Subcommand)) { | |
| case CAPI_CONNECT_B3_ACTIVE_IND: /* ncci */ | |
| if (!(nccip = find_ncci(card, cmsg->adr.adrNCCI))) | |
| goto notfound; | |
| capi_cmsg_answer(cmsg); | |
| ncci_change_state(card, nccip, EV_NCCI_CONNECT_B3_ACTIVE_IND); | |
| send_message(card, cmsg); | |
| cmd.command = ISDN_STAT_BCONN; | |
| cmd.driver = card->myid; | |
| cmd.arg = nccip->chan; | |
| card->interface.statcallb(&cmd); | |
| printk(KERN_INFO "capidrv-%d: chan %d up with ncci 0x%x\n", | |
| card->contrnr, nccip->chan, nccip->ncci); | |
| break; | |
| case CAPI_CONNECT_B3_ACTIVE_CONF: /* ncci */ | |
| goto ignored; | |
| case CAPI_CONNECT_B3_IND: /* ncci */ | |
| plcip = find_plci_by_ncci(card, cmsg->adr.adrNCCI); | |
| if (plcip) { | |
| nccip = new_ncci(card, plcip, cmsg->adr.adrNCCI); | |
| if (nccip) { | |
| ncci_change_state(card, nccip, EV_NCCI_CONNECT_B3_IND); | |
| capi_fill_CONNECT_B3_RESP(cmsg, | |
| global.ap.applid, | |
| card->msgid++, | |
| nccip->ncci, /* adr */ | |
| 0, /* Reject */ | |
| NULL /* NCPI */ | |
| ); | |
| ncci_change_state(card, nccip, EV_NCCI_CONNECT_B3_RESP); | |
| send_message(card, cmsg); | |
| break; | |
| } | |
| printk(KERN_ERR "capidrv-%d: no mem for ncci, sorry\n", card->contrnr); | |
| } else { | |
| printk(KERN_ERR "capidrv-%d: %s: plci for ncci 0x%x not found\n", | |
| card->contrnr, | |
| capi_cmd2str(cmsg->Command, cmsg->Subcommand), | |
| cmsg->adr.adrNCCI); | |
| } | |
| capi_fill_CONNECT_B3_RESP(cmsg, | |
| global.ap.applid, | |
| card->msgid++, | |
| cmsg->adr.adrNCCI, | |
| 2, /* Reject */ | |
| NULL /* NCPI */ | |
| ); | |
| send_message(card, cmsg); | |
| break; | |
| case CAPI_CONNECT_B3_CONF: /* ncci */ | |
| if (!(nccip = find_ncci_by_msgid(card, | |
| cmsg->adr.adrNCCI, | |
| cmsg->Messagenumber))) | |
| goto notfound; | |
| nccip->ncci = cmsg->adr.adrNCCI; | |
| if (cmsg->Info) { | |
| printk(KERN_INFO "capidrv-%d: %s info 0x%x (%s) for ncci 0x%x\n", | |
| card->contrnr, | |
| capi_cmd2str(cmsg->Command, cmsg->Subcommand), | |
| cmsg->Info, capi_info2str(cmsg->Info), | |
| cmsg->adr.adrNCCI); | |
| } | |
| if (cmsg->Info) | |
| ncci_change_state(card, nccip, EV_NCCI_CONNECT_B3_CONF_ERROR); | |
| else | |
| ncci_change_state(card, nccip, EV_NCCI_CONNECT_B3_CONF_OK); | |
| break; | |
| case CAPI_CONNECT_B3_T90_ACTIVE_IND: /* ncci */ | |
| capi_cmsg_answer(cmsg); | |
| send_message(card, cmsg); | |
| break; | |
| case CAPI_DATA_B3_IND: /* ncci */ | |
| /* handled in handle_data() */ | |
| goto ignored; | |
| case CAPI_DATA_B3_CONF: /* ncci */ | |
| if (cmsg->Info) { | |
| printk(KERN_WARNING "CAPI_DATA_B3_CONF: Info %x - %s\n", | |
| cmsg->Info, capi_info2str(cmsg->Info)); | |
| } | |
| if (!(nccip = find_ncci(card, cmsg->adr.adrNCCI))) | |
| goto notfound; | |
| len = capidrv_del_ack(nccip, cmsg->DataHandle); | |
| if (len < 0) | |
| break; | |
| cmd.command = ISDN_STAT_BSENT; | |
| cmd.driver = card->myid; | |
| cmd.arg = nccip->chan; | |
| cmd.parm.length = len; | |
| card->interface.statcallb(&cmd); | |
| break; | |
| case CAPI_DISCONNECT_B3_IND: /* ncci */ | |
| if (!(nccip = find_ncci(card, cmsg->adr.adrNCCI))) | |
| goto notfound; | |
| card->bchans[nccip->chan].disconnecting = 1; | |
| ncci_change_state(card, nccip, EV_NCCI_DISCONNECT_B3_IND); | |
| capi_cmsg_answer(cmsg); | |
| ncci_change_state(card, nccip, EV_NCCI_DISCONNECT_B3_RESP); | |
| send_message(card, cmsg); | |
| break; | |
| case CAPI_DISCONNECT_B3_CONF: /* ncci */ | |
| if (!(nccip = find_ncci(card, cmsg->adr.adrNCCI))) | |
| goto notfound; | |
| if (cmsg->Info) { | |
| printk(KERN_INFO "capidrv-%d: %s info 0x%x (%s) for ncci 0x%x\n", | |
| card->contrnr, | |
| capi_cmd2str(cmsg->Command, cmsg->Subcommand), | |
| cmsg->Info, capi_info2str(cmsg->Info), | |
| cmsg->adr.adrNCCI); | |
| ncci_change_state(card, nccip, EV_NCCI_DISCONNECT_B3_CONF_ERROR); | |
| } | |
| break; | |
| case CAPI_RESET_B3_IND: /* ncci */ | |
| if (!(nccip = find_ncci(card, cmsg->adr.adrNCCI))) | |
| goto notfound; | |
| ncci_change_state(card, nccip, EV_NCCI_RESET_B3_IND); | |
| capi_cmsg_answer(cmsg); | |
| send_message(card, cmsg); | |
| break; | |
| case CAPI_RESET_B3_CONF: /* ncci */ | |
| goto ignored; /* $$$$ */ | |
| case CAPI_FACILITY_IND: /* Controller/plci/ncci */ | |
| goto ignored; | |
| case CAPI_FACILITY_CONF: /* Controller/plci/ncci */ | |
| goto ignored; | |
| default: | |
| printk(KERN_ERR "capidrv-%d: got %s for ncci 0x%x ???", | |
| card->contrnr, | |
| capi_cmd2str(cmsg->Command, cmsg->Subcommand), | |
| cmsg->adr.adrNCCI); | |
| } | |
| return; | |
| ignored: | |
| printk(KERN_INFO "capidrv-%d: %s for ncci 0x%x ignored\n", | |
| card->contrnr, | |
| capi_cmd2str(cmsg->Command, cmsg->Subcommand), | |
| cmsg->adr.adrNCCI); | |
| return; | |
| notfound: | |
| printk(KERN_ERR "capidrv-%d: %s: ncci 0x%x not found\n", | |
| card->contrnr, | |
| capi_cmd2str(cmsg->Command, cmsg->Subcommand), | |
| cmsg->adr.adrNCCI); | |
| } | |
| static void handle_data(_cmsg *cmsg, struct sk_buff *skb) | |
| { | |
| capidrv_contr *card = findcontrbynumber(cmsg->adr.adrController & 0x7f); | |
| capidrv_ncci *nccip; | |
| if (!card) { | |
| printk(KERN_ERR "capidrv: %s from unknown controller 0x%x\n", | |
| capi_cmd2str(cmsg->Command, cmsg->Subcommand), | |
| cmsg->adr.adrController & 0x7f); | |
| kfree_skb(skb); | |
| return; | |
| } | |
| if (!(nccip = find_ncci(card, cmsg->adr.adrNCCI))) { | |
| printk(KERN_ERR "capidrv-%d: %s: ncci 0x%x not found\n", | |
| card->contrnr, | |
| capi_cmd2str(cmsg->Command, cmsg->Subcommand), | |
| cmsg->adr.adrNCCI); | |
| kfree_skb(skb); | |
| return; | |
| } | |
| (void) skb_pull(skb, CAPIMSG_LEN(skb->data)); | |
| card->interface.rcvcallb_skb(card->myid, nccip->chan, skb); | |
| capi_cmsg_answer(cmsg); | |
| send_message(card, cmsg); | |
| } | |
| static _cmsg s_cmsg; | |
| static void capidrv_recv_message(struct capi20_appl *ap, struct sk_buff *skb) | |
| { | |
| if (capi_message2cmsg(&s_cmsg, skb->data)) { | |
| printk(KERN_ERR "capidrv: applid=%d: received invalid message\n", | |
| ap->applid); | |
| kfree_skb(skb); | |
| return; | |
| } | |
| if (debugmode > 3) { | |
| _cdebbuf *cdb = capi_cmsg2str(&s_cmsg); | |
| if (cdb) { | |
| printk(KERN_DEBUG "%s: applid=%d %s\n", __func__, | |
| ap->applid, cdb->buf); | |
| cdebbuf_free(cdb); | |
| } else | |
| printk(KERN_DEBUG "%s: applid=%d %s not traced\n", | |
| __func__, ap->applid, | |
| capi_cmd2str(s_cmsg.Command, s_cmsg.Subcommand)); | |
| } | |
| if (s_cmsg.Command == CAPI_DATA_B3 | |
| && s_cmsg.Subcommand == CAPI_IND) { | |
| handle_data(&s_cmsg, skb); | |
| return; | |
| } | |
| if ((s_cmsg.adr.adrController & 0xffffff00) == 0) | |
| handle_controller(&s_cmsg); | |
| else if ((s_cmsg.adr.adrPLCI & 0xffff0000) == 0) | |
| handle_plci(&s_cmsg); | |
| else | |
| handle_ncci(&s_cmsg); | |
| /* | |
| * data of skb used in s_cmsg, | |
| * free data when s_cmsg is not used again | |
| * thanks to Lars Heete <hel@admin.de> | |
| */ | |
| kfree_skb(skb); | |
| } | |
| /* ------------------------------------------------------------------- */ | |
| #define PUTBYTE_TO_STATUS(card, byte) \ | |
| do { \ | |
| *(card)->q931_write++ = (byte); \ | |
| if ((card)->q931_write > (card)->q931_end) \ | |
| (card)->q931_write = (card)->q931_buf; \ | |
| } while (0) | |
| static void handle_dtrace_data(capidrv_contr *card, | |
| int send, int level2, u8 *data, u16 len) | |
| { | |
| u8 *p, *end; | |
| isdn_ctrl cmd; | |
| if (!len) { | |
| printk(KERN_DEBUG "capidrv-%d: avmb1_q931_data: len == %d\n", | |
| card->contrnr, len); | |
| return; | |
| } | |
| if (level2) { | |
| PUTBYTE_TO_STATUS(card, 'D'); | |
| PUTBYTE_TO_STATUS(card, '2'); | |
| PUTBYTE_TO_STATUS(card, send ? '>' : '<'); | |
| PUTBYTE_TO_STATUS(card, ':'); | |
| } else { | |
| PUTBYTE_TO_STATUS(card, 'D'); | |
| PUTBYTE_TO_STATUS(card, '3'); | |
| PUTBYTE_TO_STATUS(card, send ? '>' : '<'); | |
| PUTBYTE_TO_STATUS(card, ':'); | |
| } | |
| for (p = data, end = data + len; p < end; p++) { | |
| PUTBYTE_TO_STATUS(card, ' '); | |
| PUTBYTE_TO_STATUS(card, hex_asc_hi(*p)); | |
| PUTBYTE_TO_STATUS(card, hex_asc_lo(*p)); | |
| } | |
| PUTBYTE_TO_STATUS(card, '\n'); | |
| cmd.command = ISDN_STAT_STAVAIL; | |
| cmd.driver = card->myid; | |
| cmd.arg = len * 3 + 5; | |
| card->interface.statcallb(&cmd); | |
| } | |
| /* ------------------------------------------------------------------- */ | |
| static _cmsg cmdcmsg; | |
| static int capidrv_ioctl(isdn_ctrl *c, capidrv_contr *card) | |
| { | |
| switch (c->arg) { | |
| case 1: | |
| debugmode = (int)(*((unsigned int *)c->parm.num)); | |
| printk(KERN_DEBUG "capidrv-%d: debugmode=%d\n", | |
| card->contrnr, debugmode); | |
| return 0; | |
| default: | |
| printk(KERN_DEBUG "capidrv-%d: capidrv_ioctl(%ld) called ??\n", | |
| card->contrnr, c->arg); | |
| return -EINVAL; | |
| } | |
| return -EINVAL; | |
| } | |
| /* | |
| * Handle leased lines (CAPI-Bundling) | |
| */ | |
| struct internal_bchannelinfo { | |
| unsigned short channelalloc; | |
| unsigned short operation; | |
| unsigned char cmask[31]; | |
| }; | |
| static int decodeFVteln(char *teln, unsigned long *bmaskp, int *activep) | |
| { | |
| unsigned long bmask = 0; | |
| int active = !0; | |
| char *s; | |
| int i; | |
| if (strncmp(teln, "FV:", 3) != 0) | |
| return 1; | |
| s = teln + 3; | |
| while (*s && *s == ' ') s++; | |
| if (!*s) return -2; | |
| if (*s == 'p' || *s == 'P') { | |
| active = 0; | |
| s++; | |
| } | |
| if (*s == 'a' || *s == 'A') { | |
| active = !0; | |
| s++; | |
| } | |
| while (*s) { | |
| int digit1 = 0; | |
| int digit2 = 0; | |
| char *endp; | |
| digit1 = simple_strtoul(s, &endp, 10); | |
| if (s == endp) | |
| return -3; | |
| s = endp; | |
| if (digit1 <= 0 || digit1 > 30) return -4; | |
| if (*s == 0 || *s == ',' || *s == ' ') { | |
| bmask |= (1 << digit1); | |
| digit1 = 0; | |
| if (*s) s++; | |
| continue; | |
| } | |
| if (*s != '-') return -5; | |
| s++; | |
| digit2 = simple_strtoul(s, &endp, 10); | |
| if (s == endp) | |
| return -3; | |
| s = endp; | |
| if (digit2 <= 0 || digit2 > 30) return -4; | |
| if (*s == 0 || *s == ',' || *s == ' ') { | |
| if (digit1 > digit2) | |
| for (i = digit2; i <= digit1; i++) | |
| bmask |= (1 << i); | |
| else | |
| for (i = digit1; i <= digit2; i++) | |
| bmask |= (1 << i); | |
| digit1 = digit2 = 0; | |
| if (*s) s++; | |
| continue; | |
| } | |
| return -6; | |
| } | |
| if (activep) *activep = active; | |
| if (bmaskp) *bmaskp = bmask; | |
| return 0; | |
| } | |
| static int FVteln2capi20(char *teln, u8 AdditionalInfo[1 + 2 + 2 + 31]) | |
| { | |
| unsigned long bmask; | |
| int active; | |
| int rc, i; | |
| rc = decodeFVteln(teln, &bmask, &active); | |
| if (rc) return rc; | |
| /* Length */ | |
| AdditionalInfo[0] = 2 + 2 + 31; | |
| /* Channel: 3 => use channel allocation */ | |
| AdditionalInfo[1] = 3; AdditionalInfo[2] = 0; | |
| /* Operation: 0 => DTE mode, 1 => DCE mode */ | |
| if (active) { | |
| AdditionalInfo[3] = 0; AdditionalInfo[4] = 0; | |
| } else { | |
| AdditionalInfo[3] = 1; AdditionalInfo[4] = 0; | |
| } | |
| /* Channel mask array */ | |
| AdditionalInfo[5] = 0; /* no D-Channel */ | |
| for (i = 1; i <= 30; i++) | |
| AdditionalInfo[5 + i] = (bmask & (1 << i)) ? 0xff : 0; | |
| return 0; | |
| } | |
| static int capidrv_command(isdn_ctrl *c, capidrv_contr *card) | |
| { | |
| isdn_ctrl cmd; | |
| struct capidrv_bchan *bchan; | |
| struct capidrv_plci *plcip; | |
| u8 AdditionalInfo[1 + 2 + 2 + 31]; | |
| int rc, isleasedline = 0; | |
| if (c->command == ISDN_CMD_IOCTL) | |
| return capidrv_ioctl(c, card); | |
| switch (c->command) { | |
| case ISDN_CMD_DIAL: { | |
| u8 calling[ISDN_MSNLEN + 3]; | |
| u8 called[ISDN_MSNLEN + 2]; | |
| if (debugmode) | |
| printk(KERN_DEBUG "capidrv-%d: ISDN_CMD_DIAL(ch=%ld,\"%s,%d,%d,%s\")\n", | |
| card->contrnr, | |
| c->arg, | |
| c->parm.setup.phone, | |
| c->parm.setup.si1, | |
| c->parm.setup.si2, | |
| c->parm.setup.eazmsn); | |
| bchan = &card->bchans[c->arg % card->nbchan]; | |
| if (bchan->plcip) { | |
| printk(KERN_ERR "capidrv-%d: dail ch=%ld,\"%s,%d,%d,%s\" in use (plci=0x%x)\n", | |
| card->contrnr, | |
| c->arg, | |
| c->parm.setup.phone, | |
| c->parm.setup.si1, | |
| c->parm.setup.si2, | |
| c->parm.setup.eazmsn, | |
| bchan->plcip->plci); | |
| return 0; | |
| } | |
| bchan->si1 = c->parm.setup.si1; | |
| bchan->si2 = c->parm.setup.si2; | |
| strncpy(bchan->num, c->parm.setup.phone, sizeof(bchan->num)); | |
| strncpy(bchan->mynum, c->parm.setup.eazmsn, sizeof(bchan->mynum)); | |
| rc = FVteln2capi20(bchan->num, AdditionalInfo); | |
| isleasedline = (rc == 0); | |
| if (rc < 0) | |
| printk(KERN_ERR "capidrv-%d: WARNING: invalid leased linedefinition \"%s\"\n", card->contrnr, bchan->num); | |
| if (isleasedline) { | |
| calling[0] = 0; | |
| called[0] = 0; | |
| if (debugmode) | |
| printk(KERN_DEBUG "capidrv-%d: connecting leased line\n", card->contrnr); | |
| } else { | |
| calling[0] = strlen(bchan->mynum) + 2; | |
| calling[1] = 0; | |
| calling[2] = 0x80; | |
| strncpy(calling + 3, bchan->mynum, ISDN_MSNLEN); | |
| called[0] = strlen(bchan->num) + 1; | |
| called[1] = 0x80; | |
| strncpy(called + 2, bchan->num, ISDN_MSNLEN); | |
| } | |
| capi_fill_CONNECT_REQ(&cmdcmsg, | |
| global.ap.applid, | |
| card->msgid++, | |
| card->contrnr, /* adr */ | |
| si2cip(bchan->si1, bchan->si2), /* cipvalue */ | |
| called, /* CalledPartyNumber */ | |
| calling, /* CallingPartyNumber */ | |
| NULL, /* CalledPartySubaddress */ | |
| NULL, /* CallingPartySubaddress */ | |
| b1prot(bchan->l2, bchan->l3), /* B1protocol */ | |
| b2prot(bchan->l2, bchan->l3), /* B2protocol */ | |
| b3prot(bchan->l2, bchan->l3), /* B3protocol */ | |
| b1config(bchan->l2, bchan->l3), /* B1configuration */ | |
| NULL, /* B2configuration */ | |
| NULL, /* B3configuration */ | |
| NULL, /* BC */ | |
| NULL, /* LLC */ | |
| NULL, /* HLC */ | |
| /* BChannelinformation */ | |
| isleasedline ? AdditionalInfo : NULL, | |
| NULL, /* Keypadfacility */ | |
| NULL, /* Useruserdata */ | |
| NULL /* Facilitydataarray */ | |
| ); | |
| if ((plcip = new_plci(card, (c->arg % card->nbchan))) == NULL) { | |
| cmd.command = ISDN_STAT_DHUP; | |
| cmd.driver = card->myid; | |
| cmd.arg = (c->arg % card->nbchan); | |
| card->interface.statcallb(&cmd); | |
| return -1; | |
| } | |
| plcip->msgid = cmdcmsg.Messagenumber; | |
| plcip->leasedline = isleasedline; | |
| plci_change_state(card, plcip, EV_PLCI_CONNECT_REQ); | |
| send_message(card, &cmdcmsg); | |
| return 0; | |
| } | |
| case ISDN_CMD_ACCEPTD: | |
| bchan = &card->bchans[c->arg % card->nbchan]; | |
| if (debugmode) | |
| printk(KERN_DEBUG "capidrv-%d: ISDN_CMD_ACCEPTD(ch=%ld) l2=%d l3=%d\n", | |
| card->contrnr, | |
| c->arg, bchan->l2, bchan->l3); | |
| capi_fill_CONNECT_RESP(&cmdcmsg, | |
| global.ap.applid, | |
| card->msgid++, | |
| bchan->plcip->plci, /* adr */ | |
| 0, /* Reject */ | |
| b1prot(bchan->l2, bchan->l3), /* B1protocol */ | |
| b2prot(bchan->l2, bchan->l3), /* B2protocol */ | |
| b3prot(bchan->l2, bchan->l3), /* B3protocol */ | |
| b1config(bchan->l2, bchan->l3), /* B1configuration */ | |
| NULL, /* B2configuration */ | |
| NULL, /* B3configuration */ | |
| NULL, /* ConnectedNumber */ | |
| NULL, /* ConnectedSubaddress */ | |
| NULL, /* LLC */ | |
| NULL, /* BChannelinformation */ | |
| NULL, /* Keypadfacility */ | |
| NULL, /* Useruserdata */ | |
| NULL /* Facilitydataarray */ | |
| ); | |
| if (capi_cmsg2message(&cmdcmsg, cmdcmsg.buf)) { | |
| printk(KERN_ERR "capidrv-%d: capidrv_command: parser failure\n", | |
| card->contrnr); | |
| return -EINVAL; | |
| } | |
| plci_change_state(card, bchan->plcip, EV_PLCI_CONNECT_RESP); | |
| send_message(card, &cmdcmsg); | |
| return 0; | |
| case ISDN_CMD_ACCEPTB: | |
| if (debugmode) | |
| printk(KERN_DEBUG "capidrv-%d: ISDN_CMD_ACCEPTB(ch=%ld)\n", | |
| card->contrnr, | |
| c->arg); | |
| return -ENOSYS; | |
| case ISDN_CMD_HANGUP: | |
| if (debugmode) | |
| printk(KERN_DEBUG "capidrv-%d: ISDN_CMD_HANGUP(ch=%ld)\n", | |
| card->contrnr, | |
| c->arg); | |
| bchan = &card->bchans[c->arg % card->nbchan]; | |
| if (bchan->disconnecting) { | |
| if (debugmode) | |
| printk(KERN_DEBUG "capidrv-%d: chan %ld already disconnecting ...\n", | |
| card->contrnr, | |
| c->arg); | |
| return 0; | |
| } | |
| if (bchan->nccip) { | |
| bchan->disconnecting = 1; | |
| capi_fill_DISCONNECT_B3_REQ(&cmdcmsg, | |
| global.ap.applid, | |
| card->msgid++, | |
| bchan->nccip->ncci, | |
| NULL /* NCPI */ | |
| ); | |
| ncci_change_state(card, bchan->nccip, EV_NCCI_DISCONNECT_B3_REQ); | |
| send_message(card, &cmdcmsg); | |
| return 0; | |
| } else if (bchan->plcip) { | |
| if (bchan->plcip->state == ST_PLCI_INCOMING) { | |
| /* | |
| * just ignore, we a called from | |
| * isdn_status_callback(), | |
| * which will return 0 or 2, this is handled | |
| * by the CONNECT_IND handler | |
| */ | |
| bchan->disconnecting = 1; | |
| return 0; | |
| } else if (bchan->plcip->plci) { | |
| bchan->disconnecting = 1; | |
| capi_fill_DISCONNECT_REQ(&cmdcmsg, | |
| global.ap.applid, | |
| card->msgid++, | |
| bchan->plcip->plci, | |
| NULL, /* BChannelinformation */ | |
| NULL, /* Keypadfacility */ | |
| NULL, /* Useruserdata */ | |
| NULL /* Facilitydataarray */ | |
| ); | |
| plci_change_state(card, bchan->plcip, EV_PLCI_DISCONNECT_REQ); | |
| send_message(card, &cmdcmsg); | |
| return 0; | |
| } else { | |
| printk(KERN_ERR "capidrv-%d: chan %ld disconnect request while waiting for CONNECT_CONF\n", | |
| card->contrnr, | |
| c->arg); | |
| return -EINVAL; | |
| } | |
| } | |
| printk(KERN_ERR "capidrv-%d: chan %ld disconnect request on free channel\n", | |
| card->contrnr, | |
| c->arg); | |
| return -EINVAL; | |
| /* ready */ | |
| case ISDN_CMD_SETL2: | |
| if (debugmode) | |
| printk(KERN_DEBUG "capidrv-%d: set L2 on chan %ld to %ld\n", | |
| card->contrnr, | |
| (c->arg & 0xff), (c->arg >> 8)); | |
| bchan = &card->bchans[(c->arg & 0xff) % card->nbchan]; | |
| bchan->l2 = (c->arg >> 8); | |
| return 0; | |
| case ISDN_CMD_SETL3: | |
| if (debugmode) | |
| printk(KERN_DEBUG "capidrv-%d: set L3 on chan %ld to %ld\n", | |
| card->contrnr, | |
| (c->arg & 0xff), (c->arg >> 8)); | |
| bchan = &card->bchans[(c->arg & 0xff) % card->nbchan]; | |
| bchan->l3 = (c->arg >> 8); | |
| return 0; | |
| case ISDN_CMD_SETEAZ: | |
| if (debugmode) | |
| printk(KERN_DEBUG "capidrv-%d: set EAZ \"%s\" on chan %ld\n", | |
| card->contrnr, | |
| c->parm.num, c->arg); | |
| bchan = &card->bchans[c->arg % card->nbchan]; | |
| strncpy(bchan->msn, c->parm.num, ISDN_MSNLEN); | |
| return 0; | |
| case ISDN_CMD_CLREAZ: | |
| if (debugmode) | |
| printk(KERN_DEBUG "capidrv-%d: clearing EAZ on chan %ld\n", | |
| card->contrnr, c->arg); | |
| bchan = &card->bchans[c->arg % card->nbchan]; | |
| bchan->msn[0] = 0; | |
| return 0; | |
| default: | |
| printk(KERN_ERR "capidrv-%d: ISDN_CMD_%d, Huh?\n", | |
| card->contrnr, c->command); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int if_command(isdn_ctrl *c) | |
| { | |
| capidrv_contr *card = findcontrbydriverid(c->driver); | |
| if (card) | |
| return capidrv_command(c, card); | |
| printk(KERN_ERR | |
| "capidrv: if_command %d called with invalid driverId %d!\n", | |
| c->command, c->driver); | |
| return -ENODEV; | |
| } | |
| static _cmsg sendcmsg; | |
| static int if_sendbuf(int id, int channel, int doack, struct sk_buff *skb) | |
| { | |
| capidrv_contr *card = findcontrbydriverid(id); | |
| capidrv_bchan *bchan; | |
| capidrv_ncci *nccip; | |
| int len = skb->len; | |
| int msglen; | |
| u16 errcode; | |
| u16 datahandle; | |
| u32 data; | |
| if (!card) { | |
| printk(KERN_ERR "capidrv: if_sendbuf called with invalid driverId %d!\n", | |
| id); | |
| return 0; | |
| } | |
| if (debugmode > 4) | |
| printk(KERN_DEBUG "capidrv-%d: sendbuf len=%d skb=%p doack=%d\n", | |
| card->contrnr, len, skb, doack); | |
| bchan = &card->bchans[channel % card->nbchan]; | |
| nccip = bchan->nccip; | |
| if (!nccip || nccip->state != ST_NCCI_ACTIVE) { | |
| printk(KERN_ERR "capidrv-%d: if_sendbuf: %s:%d: chan not up!\n", | |
| card->contrnr, card->name, channel); | |
| return 0; | |
| } | |
| datahandle = nccip->datahandle; | |
| /* | |
| * Here we copy pointer skb->data into the 32-bit 'Data' field. | |
| * The 'Data' field is not used in practice in linux kernel | |
| * (neither in 32 or 64 bit), but should have some value, | |
| * since a CAPI message trace will display it. | |
| * | |
| * The correct value in the 32 bit case is the address of the | |
| * data, in 64 bit it makes no sense, we use 0 there. | |
| */ | |
| #ifdef CONFIG_64BIT | |
| data = 0; | |
| #else | |
| data = (unsigned long) skb->data; | |
| #endif | |
| capi_fill_DATA_B3_REQ(&sendcmsg, global.ap.applid, card->msgid++, | |
| nccip->ncci, /* adr */ | |
| data, /* Data */ | |
| skb->len, /* DataLength */ | |
| datahandle, /* DataHandle */ | |
| 0 /* Flags */ | |
| ); | |
| if (capidrv_add_ack(nccip, datahandle, doack ? (int)skb->len : -1) < 0) | |
| return 0; | |
| if (capi_cmsg2message(&sendcmsg, sendcmsg.buf)) { | |
| printk(KERN_ERR "capidrv-%d: if_sendbuf: parser failure\n", | |
| card->contrnr); | |
| return -EINVAL; | |
| } | |
| msglen = CAPIMSG_LEN(sendcmsg.buf); | |
| if (skb_headroom(skb) < msglen) { | |
| struct sk_buff *nskb = skb_realloc_headroom(skb, msglen); | |
| if (!nskb) { | |
| printk(KERN_ERR "capidrv-%d: if_sendbuf: no memory\n", | |
| card->contrnr); | |
| (void)capidrv_del_ack(nccip, datahandle); | |
| return 0; | |
| } | |
| printk(KERN_DEBUG "capidrv-%d: only %d bytes headroom, need %d\n", | |
| card->contrnr, skb_headroom(skb), msglen); | |
| memcpy(skb_push(nskb, msglen), sendcmsg.buf, msglen); | |
| errcode = capi20_put_message(&global.ap, nskb); | |
| if (errcode == CAPI_NOERROR) { | |
| dev_kfree_skb(skb); | |
| nccip->datahandle++; | |
| return len; | |
| } | |
| if (debugmode > 3) | |
| printk(KERN_DEBUG "capidrv-%d: sendbuf putmsg ret(%x) - %s\n", | |
| card->contrnr, errcode, capi_info2str(errcode)); | |
| (void)capidrv_del_ack(nccip, datahandle); | |
| dev_kfree_skb(nskb); | |
| return errcode == CAPI_SENDQUEUEFULL ? 0 : -1; | |
| } else { | |
| memcpy(skb_push(skb, msglen), sendcmsg.buf, msglen); | |
| errcode = capi20_put_message(&global.ap, skb); | |
| if (errcode == CAPI_NOERROR) { | |
| nccip->datahandle++; | |
| return len; | |
| } | |
| if (debugmode > 3) | |
| printk(KERN_DEBUG "capidrv-%d: sendbuf putmsg ret(%x) - %s\n", | |
| card->contrnr, errcode, capi_info2str(errcode)); | |
| skb_pull(skb, msglen); | |
| (void)capidrv_del_ack(nccip, datahandle); | |
| return errcode == CAPI_SENDQUEUEFULL ? 0 : -1; | |
| } | |
| } | |
| static int if_readstat(u8 __user *buf, int len, int id, int channel) | |
| { | |
| capidrv_contr *card = findcontrbydriverid(id); | |
| int count; | |
| u8 __user *p; | |
| if (!card) { | |
| printk(KERN_ERR "capidrv: if_readstat called with invalid driverId %d!\n", | |
| id); | |
| return -ENODEV; | |
| } | |
| for (p = buf, count = 0; count < len; p++, count++) { | |
| if (put_user(*card->q931_read++, p)) | |
| return -EFAULT; | |
| if (card->q931_read > card->q931_end) | |
| card->q931_read = card->q931_buf; | |
| } | |
| return count; | |
| } | |
| static void enable_dchannel_trace(capidrv_contr *card) | |
| { | |
| u8 manufacturer[CAPI_MANUFACTURER_LEN]; | |
| capi_version version; | |
| u16 contr = card->contrnr; | |
| u16 errcode; | |
| u16 avmversion[3]; | |
| errcode = capi20_get_manufacturer(contr, manufacturer); | |
| if (errcode != CAPI_NOERROR) { | |
| printk(KERN_ERR "%s: can't get manufacturer (0x%x)\n", | |
| card->name, errcode); | |
| return; | |
| } | |
| if (strstr(manufacturer, "AVM") == NULL) { | |
| printk(KERN_ERR "%s: not from AVM, no d-channel trace possible (%s)\n", | |
| card->name, manufacturer); | |
| return; | |
| } | |
| errcode = capi20_get_version(contr, &version); | |
| if (errcode != CAPI_NOERROR) { | |
| printk(KERN_ERR "%s: can't get version (0x%x)\n", | |
| card->name, errcode); | |
| return; | |
| } | |
| avmversion[0] = (version.majormanuversion >> 4) & 0x0f; | |
| avmversion[1] = (version.majormanuversion << 4) & 0xf0; | |
| avmversion[1] |= (version.minormanuversion >> 4) & 0x0f; | |
| avmversion[2] |= version.minormanuversion & 0x0f; | |
| if (avmversion[0] > 3 || (avmversion[0] == 3 && avmversion[1] > 5)) { | |
| printk(KERN_INFO "%s: D2 trace enabled\n", card->name); | |
| capi_fill_MANUFACTURER_REQ(&cmdcmsg, global.ap.applid, | |
| card->msgid++, | |
| contr, | |
| 0x214D5641, /* ManuID */ | |
| 0, /* Class */ | |
| 1, /* Function */ | |
| (_cstruct)"\004\200\014\000\000"); | |
| } else { | |
| printk(KERN_INFO "%s: D3 trace enabled\n", card->name); | |
| capi_fill_MANUFACTURER_REQ(&cmdcmsg, global.ap.applid, | |
| card->msgid++, | |
| contr, | |
| 0x214D5641, /* ManuID */ | |
| 0, /* Class */ | |
| 1, /* Function */ | |
| (_cstruct)"\004\002\003\000\000"); | |
| } | |
| send_message(card, &cmdcmsg); | |
| } | |
| static void send_listen(capidrv_contr *card) | |
| { | |
| capi_fill_LISTEN_REQ(&cmdcmsg, global.ap.applid, | |
| card->msgid++, | |
| card->contrnr, /* controller */ | |
| 1 << 6, /* Infomask */ | |
| card->cipmask, | |
| card->cipmask2, | |
| NULL, NULL); | |
| listen_change_state(card, EV_LISTEN_REQ); | |
| send_message(card, &cmdcmsg); | |
| } | |
| static void listentimerfunc(unsigned long x) | |
| { | |
| capidrv_contr *card = (capidrv_contr *)x; | |
| if (card->state != ST_LISTEN_NONE && card->state != ST_LISTEN_ACTIVE) | |
| printk(KERN_ERR "%s: controller dead ??\n", card->name); | |
| send_listen(card); | |
| mod_timer(&card->listentimer, jiffies + 60 * HZ); | |
| } | |
| static int capidrv_addcontr(u16 contr, struct capi_profile *profp) | |
| { | |
| capidrv_contr *card; | |
| unsigned long flags; | |
| isdn_ctrl cmd; | |
| char id[20]; | |
| int i; | |
| sprintf(id, "capidrv-%d", contr); | |
| if (!try_module_get(THIS_MODULE)) { | |
| printk(KERN_WARNING "capidrv: (%s) Could not reserve module\n", id); | |
| return -1; | |
| } | |
| if (!(card = kzalloc(sizeof(capidrv_contr), GFP_ATOMIC))) { | |
| printk(KERN_WARNING | |
| "capidrv: (%s) Could not allocate contr-struct.\n", id); | |
| return -1; | |
| } | |
| card->owner = THIS_MODULE; | |
| setup_timer(&card->listentimer, listentimerfunc, (unsigned long)card); | |
| strcpy(card->name, id); | |
| card->contrnr = contr; | |
| card->nbchan = profp->nbchannel; | |
| card->bchans = kmalloc(sizeof(capidrv_bchan) * card->nbchan, GFP_ATOMIC); | |
| if (!card->bchans) { | |
| printk(KERN_WARNING | |
| "capidrv: (%s) Could not allocate bchan-structs.\n", id); | |
| module_put(card->owner); | |
| kfree(card); | |
| return -1; | |
| } | |
| card->interface.channels = profp->nbchannel; | |
| card->interface.maxbufsize = 2048; | |
| card->interface.command = if_command; | |
| card->interface.writebuf_skb = if_sendbuf; | |
| card->interface.writecmd = NULL; | |
| card->interface.readstat = if_readstat; | |
| card->interface.features = | |
| ISDN_FEATURE_L2_HDLC | | |
| ISDN_FEATURE_L2_TRANS | | |
| ISDN_FEATURE_L3_TRANS | | |
| ISDN_FEATURE_P_UNKNOWN | | |
| ISDN_FEATURE_L2_X75I | | |
| ISDN_FEATURE_L2_X75UI | | |
| ISDN_FEATURE_L2_X75BUI; | |
| if (profp->support1 & (1 << 2)) | |
| card->interface.features |= | |
| ISDN_FEATURE_L2_V11096 | | |
| ISDN_FEATURE_L2_V11019 | | |
| ISDN_FEATURE_L2_V11038; | |
| if (profp->support1 & (1 << 8)) | |
| card->interface.features |= ISDN_FEATURE_L2_MODEM; | |
| card->interface.hl_hdrlen = 22; /* len of DATA_B3_REQ */ | |
| strncpy(card->interface.id, id, sizeof(card->interface.id) - 1); | |
| card->q931_read = card->q931_buf; | |
| card->q931_write = card->q931_buf; | |
| card->q931_end = card->q931_buf + sizeof(card->q931_buf) - 1; | |
| if (!register_isdn(&card->interface)) { | |
| printk(KERN_ERR "capidrv: Unable to register contr %s\n", id); | |
| kfree(card->bchans); | |
| module_put(card->owner); | |
| kfree(card); | |
| return -1; | |
| } | |
| card->myid = card->interface.channels; | |
| memset(card->bchans, 0, sizeof(capidrv_bchan) * card->nbchan); | |
| for (i = 0; i < card->nbchan; i++) { | |
| card->bchans[i].contr = card; | |
| } | |
| spin_lock_irqsave(&global_lock, flags); | |
| card->next = global.contr_list; | |
| global.contr_list = card; | |
| global.ncontr++; | |
| spin_unlock_irqrestore(&global_lock, flags); | |
| cmd.command = ISDN_STAT_RUN; | |
| cmd.driver = card->myid; | |
| card->interface.statcallb(&cmd); | |
| card->cipmask = 0x1FFF03FF; /* any */ | |
| card->cipmask2 = 0; | |
| send_listen(card); | |
| mod_timer(&card->listentimer, jiffies + 60 * HZ); | |
| printk(KERN_INFO "%s: now up (%d B channels)\n", | |
| card->name, card->nbchan); | |
| enable_dchannel_trace(card); | |
| return 0; | |
| } | |
| static int capidrv_delcontr(u16 contr) | |
| { | |
| capidrv_contr **pp, *card; | |
| unsigned long flags; | |
| isdn_ctrl cmd; | |
| spin_lock_irqsave(&global_lock, flags); | |
| for (card = global.contr_list; card; card = card->next) { | |
| if (card->contrnr == contr) | |
| break; | |
| } | |
| if (!card) { | |
| spin_unlock_irqrestore(&global_lock, flags); | |
| printk(KERN_ERR "capidrv: delcontr: no contr %u\n", contr); | |
| return -1; | |
| } | |
| /* FIXME: maybe a race condition the card should be removed | |
| * here from global list /kkeil | |
| */ | |
| spin_unlock_irqrestore(&global_lock, flags); | |
| del_timer(&card->listentimer); | |
| if (debugmode) | |
| printk(KERN_DEBUG "capidrv-%d: id=%d unloading\n", | |
| card->contrnr, card->myid); | |
| cmd.command = ISDN_STAT_STOP; | |
| cmd.driver = card->myid; | |
| card->interface.statcallb(&cmd); | |
| while (card->nbchan) { | |
| cmd.command = ISDN_STAT_DISCH; | |
| cmd.driver = card->myid; | |
| cmd.arg = card->nbchan - 1; | |
| cmd.parm.num[0] = 0; | |
| if (debugmode) | |
| printk(KERN_DEBUG "capidrv-%d: id=%d disable chan=%ld\n", | |
| card->contrnr, card->myid, cmd.arg); | |
| card->interface.statcallb(&cmd); | |
| if (card->bchans[card->nbchan - 1].nccip) | |
| free_ncci(card, card->bchans[card->nbchan - 1].nccip); | |
| if (card->bchans[card->nbchan - 1].plcip) | |
| free_plci(card, card->bchans[card->nbchan - 1].plcip); | |
| if (card->plci_list) | |
| printk(KERN_ERR "capidrv: bug in free_plci()\n"); | |
| card->nbchan--; | |
| } | |
| kfree(card->bchans); | |
| card->bchans = NULL; | |
| if (debugmode) | |
| printk(KERN_DEBUG "capidrv-%d: id=%d isdn unload\n", | |
| card->contrnr, card->myid); | |
| cmd.command = ISDN_STAT_UNLOAD; | |
| cmd.driver = card->myid; | |
| card->interface.statcallb(&cmd); | |
| if (debugmode) | |
| printk(KERN_DEBUG "capidrv-%d: id=%d remove contr from list\n", | |
| card->contrnr, card->myid); | |
| spin_lock_irqsave(&global_lock, flags); | |
| for (pp = &global.contr_list; *pp; pp = &(*pp)->next) { | |
| if (*pp == card) { | |
| *pp = (*pp)->next; | |
| card->next = NULL; | |
| global.ncontr--; | |
| break; | |
| } | |
| } | |
| spin_unlock_irqrestore(&global_lock, flags); | |
| module_put(card->owner); | |
| printk(KERN_INFO "%s: now down.\n", card->name); | |
| kfree(card); | |
| return 0; | |
| } | |
| static int | |
| lower_callback(struct notifier_block *nb, unsigned long val, void *v) | |
| { | |
| capi_profile profile; | |
| u32 contr = (long)v; | |
| switch (val) { | |
| case CAPICTR_UP: | |
| printk(KERN_INFO "capidrv: controller %hu up\n", contr); | |
| if (capi20_get_profile(contr, &profile) == CAPI_NOERROR) | |
| (void) capidrv_addcontr(contr, &profile); | |
| break; | |
| case CAPICTR_DOWN: | |
| printk(KERN_INFO "capidrv: controller %hu down\n", contr); | |
| (void) capidrv_delcontr(contr); | |
| break; | |
| } | |
| return NOTIFY_OK; | |
| } | |
| /* | |
| * /proc/capi/capidrv: | |
| * nrecvctlpkt nrecvdatapkt nsendctlpkt nsenddatapkt | |
| */ | |
| static int capidrv_proc_show(struct seq_file *m, void *v) | |
| { | |
| seq_printf(m, "%lu %lu %lu %lu\n", | |
| global.ap.nrecvctlpkt, | |
| global.ap.nrecvdatapkt, | |
| global.ap.nsentctlpkt, | |
| global.ap.nsentdatapkt); | |
| return 0; | |
| } | |
| static int capidrv_proc_open(struct inode *inode, struct file *file) | |
| { | |
| return single_open(file, capidrv_proc_show, NULL); | |
| } | |
| static const struct file_operations capidrv_proc_fops = { | |
| .owner = THIS_MODULE, | |
| .open = capidrv_proc_open, | |
| .read = seq_read, | |
| .llseek = seq_lseek, | |
| .release = single_release, | |
| }; | |
| static void __init proc_init(void) | |
| { | |
| proc_create("capi/capidrv", 0, NULL, &capidrv_proc_fops); | |
| } | |
| static void __exit proc_exit(void) | |
| { | |
| remove_proc_entry("capi/capidrv", NULL); | |
| } | |
| static struct notifier_block capictr_nb = { | |
| .notifier_call = lower_callback, | |
| }; | |
| static int __init capidrv_init(void) | |
| { | |
| capi_profile profile; | |
| u32 ncontr, contr; | |
| u16 errcode; | |
| global.ap.rparam.level3cnt = -2; /* number of bchannels twice */ | |
| global.ap.rparam.datablkcnt = 16; | |
| global.ap.rparam.datablklen = 2048; | |
| global.ap.recv_message = capidrv_recv_message; | |
| errcode = capi20_register(&global.ap); | |
| if (errcode) { | |
| return -EIO; | |
| } | |
| register_capictr_notifier(&capictr_nb); | |
| errcode = capi20_get_profile(0, &profile); | |
| if (errcode != CAPI_NOERROR) { | |
| unregister_capictr_notifier(&capictr_nb); | |
| capi20_release(&global.ap); | |
| return -EIO; | |
| } | |
| ncontr = profile.ncontroller; | |
| for (contr = 1; contr <= ncontr; contr++) { | |
| errcode = capi20_get_profile(contr, &profile); | |
| if (errcode != CAPI_NOERROR) | |
| continue; | |
| (void) capidrv_addcontr(contr, &profile); | |
| } | |
| proc_init(); | |
| return 0; | |
| } | |
| static void __exit capidrv_exit(void) | |
| { | |
| unregister_capictr_notifier(&capictr_nb); | |
| capi20_release(&global.ap); | |
| proc_exit(); | |
| } | |
| module_init(capidrv_init); | |
| module_exit(capidrv_exit); |