| /* | |
| * Stuff used by all variants of the driver | |
| * | |
| * Copyright (c) 2001 by Stefan Eilers, | |
| * Hansjoerg Lipp <hjlipp@web.de>, | |
| * Tilman Schmidt <tilman@imap.cc>. | |
| * | |
| * ===================================================================== | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * ===================================================================== | |
| */ | |
| #include "gigaset.h" | |
| #include <linux/isdnif.h> | |
| #include <linux/export.h> | |
| #define SBUFSIZE 4096 /* sk_buff payload size */ | |
| #define TRANSBUFSIZE 768 /* bytes per skb for transparent receive */ | |
| #define HW_HDR_LEN 2 /* Header size used to store ack info */ | |
| #define MAX_BUF_SIZE (SBUFSIZE - HW_HDR_LEN) /* max data packet from LL */ | |
| /* == Handling of I4L IO =====================================================*/ | |
| /* writebuf_from_LL | |
| * called by LL to transmit data on an open channel | |
| * inserts the buffer data into the send queue and starts the transmission | |
| * Note that this operation must not sleep! | |
| * When the buffer is processed completely, gigaset_skb_sent() should be called. | |
| * parameters: | |
| * driverID driver ID as assigned by LL | |
| * channel channel number | |
| * ack if != 0 LL wants to be notified on completion via | |
| * statcallb(ISDN_STAT_BSENT) | |
| * skb skb containing data to send | |
| * return value: | |
| * number of accepted bytes | |
| * 0 if temporarily unable to accept data (out of buffer space) | |
| * <0 on error (eg. -EINVAL) | |
| */ | |
| static int writebuf_from_LL(int driverID, int channel, int ack, | |
| struct sk_buff *skb) | |
| { | |
| struct cardstate *cs = gigaset_get_cs_by_id(driverID); | |
| struct bc_state *bcs; | |
| unsigned char *ack_header; | |
| unsigned len; | |
| if (!cs) { | |
| pr_err("%s: invalid driver ID (%d)\n", __func__, driverID); | |
| return -ENODEV; | |
| } | |
| if (channel < 0 || channel >= cs->channels) { | |
| dev_err(cs->dev, "%s: invalid channel ID (%d)\n", | |
| __func__, channel); | |
| return -ENODEV; | |
| } | |
| bcs = &cs->bcs[channel]; | |
| /* can only handle linear sk_buffs */ | |
| if (skb_linearize(skb) < 0) { | |
| dev_err(cs->dev, "%s: skb_linearize failed\n", __func__); | |
| return -ENOMEM; | |
| } | |
| len = skb->len; | |
| gig_dbg(DEBUG_LLDATA, | |
| "Receiving data from LL (id: %d, ch: %d, ack: %d, sz: %d)", | |
| driverID, channel, ack, len); | |
| if (!len) { | |
| if (ack) | |
| dev_notice(cs->dev, "%s: not ACKing empty packet\n", | |
| __func__); | |
| return 0; | |
| } | |
| if (len > MAX_BUF_SIZE) { | |
| dev_err(cs->dev, "%s: packet too large (%d bytes)\n", | |
| __func__, len); | |
| return -EINVAL; | |
| } | |
| /* set up acknowledgement header */ | |
| if (skb_headroom(skb) < HW_HDR_LEN) { | |
| /* should never happen */ | |
| dev_err(cs->dev, "%s: insufficient skb headroom\n", __func__); | |
| return -ENOMEM; | |
| } | |
| skb_set_mac_header(skb, -HW_HDR_LEN); | |
| skb->mac_len = HW_HDR_LEN; | |
| ack_header = skb_mac_header(skb); | |
| if (ack) { | |
| ack_header[0] = len & 0xff; | |
| ack_header[1] = len >> 8; | |
| } else { | |
| ack_header[0] = ack_header[1] = 0; | |
| } | |
| gig_dbg(DEBUG_MCMD, "skb: len=%u, ack=%d: %02x %02x", | |
| len, ack, ack_header[0], ack_header[1]); | |
| /* pass to device-specific module */ | |
| return cs->ops->send_skb(bcs, skb); | |
| } | |
| /** | |
| * gigaset_skb_sent() - acknowledge sending an skb | |
| * @bcs: B channel descriptor structure. | |
| * @skb: sent data. | |
| * | |
| * Called by hardware module {bas,ser,usb}_gigaset when the data in a | |
| * skb has been successfully sent, for signalling completion to the LL. | |
| */ | |
| void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb) | |
| { | |
| isdn_if *iif = bcs->cs->iif; | |
| unsigned char *ack_header = skb_mac_header(skb); | |
| unsigned len; | |
| isdn_ctrl response; | |
| ++bcs->trans_up; | |
| if (skb->len) | |
| dev_warn(bcs->cs->dev, "%s: skb->len==%d\n", | |
| __func__, skb->len); | |
| len = ack_header[0] + ((unsigned) ack_header[1] << 8); | |
| if (len) { | |
| gig_dbg(DEBUG_MCMD, "ACKing to LL (id: %d, ch: %d, sz: %u)", | |
| bcs->cs->myid, bcs->channel, len); | |
| response.driver = bcs->cs->myid; | |
| response.command = ISDN_STAT_BSENT; | |
| response.arg = bcs->channel; | |
| response.parm.length = len; | |
| iif->statcallb(&response); | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(gigaset_skb_sent); | |
| /** | |
| * gigaset_skb_rcvd() - pass received skb to LL | |
| * @bcs: B channel descriptor structure. | |
| * @skb: received data. | |
| * | |
| * Called by hardware module {bas,ser,usb}_gigaset when user data has | |
| * been successfully received, for passing to the LL. | |
| * Warning: skb must not be accessed anymore! | |
| */ | |
| void gigaset_skb_rcvd(struct bc_state *bcs, struct sk_buff *skb) | |
| { | |
| isdn_if *iif = bcs->cs->iif; | |
| iif->rcvcallb_skb(bcs->cs->myid, bcs->channel, skb); | |
| bcs->trans_down++; | |
| } | |
| EXPORT_SYMBOL_GPL(gigaset_skb_rcvd); | |
| /** | |
| * gigaset_isdn_rcv_err() - signal receive error | |
| * @bcs: B channel descriptor structure. | |
| * | |
| * Called by hardware module {bas,ser,usb}_gigaset when a receive error | |
| * has occurred, for signalling to the LL. | |
| */ | |
| void gigaset_isdn_rcv_err(struct bc_state *bcs) | |
| { | |
| isdn_if *iif = bcs->cs->iif; | |
| isdn_ctrl response; | |
| /* if currently ignoring packets, just count down */ | |
| if (bcs->ignore) { | |
| bcs->ignore--; | |
| return; | |
| } | |
| /* update statistics */ | |
| bcs->corrupted++; | |
| /* error -> LL */ | |
| gig_dbg(DEBUG_CMD, "sending L1ERR"); | |
| response.driver = bcs->cs->myid; | |
| response.command = ISDN_STAT_L1ERR; | |
| response.arg = bcs->channel; | |
| response.parm.errcode = ISDN_STAT_L1ERR_RECV; | |
| iif->statcallb(&response); | |
| } | |
| EXPORT_SYMBOL_GPL(gigaset_isdn_rcv_err); | |
| /* This function will be called by LL to send commands | |
| * NOTE: LL ignores the returned value, for commands other than ISDN_CMD_IOCTL, | |
| * so don't put too much effort into it. | |
| */ | |
| static int command_from_LL(isdn_ctrl *cntrl) | |
| { | |
| struct cardstate *cs; | |
| struct bc_state *bcs; | |
| int retval = 0; | |
| char **commands; | |
| int ch; | |
| int i; | |
| size_t l; | |
| gig_dbg(DEBUG_CMD, "driver: %d, command: %d, arg: 0x%lx", | |
| cntrl->driver, cntrl->command, cntrl->arg); | |
| cs = gigaset_get_cs_by_id(cntrl->driver); | |
| if (cs == NULL) { | |
| pr_err("%s: invalid driver ID (%d)\n", __func__, cntrl->driver); | |
| return -ENODEV; | |
| } | |
| ch = cntrl->arg & 0xff; | |
| switch (cntrl->command) { | |
| case ISDN_CMD_IOCTL: | |
| dev_warn(cs->dev, "ISDN_CMD_IOCTL not supported\n"); | |
| return -EINVAL; | |
| case ISDN_CMD_DIAL: | |
| gig_dbg(DEBUG_CMD, | |
| "ISDN_CMD_DIAL (phone: %s, msn: %s, si1: %d, si2: %d)", | |
| cntrl->parm.setup.phone, cntrl->parm.setup.eazmsn, | |
| cntrl->parm.setup.si1, cntrl->parm.setup.si2); | |
| if (ch >= cs->channels) { | |
| dev_err(cs->dev, | |
| "ISDN_CMD_DIAL: invalid channel (%d)\n", ch); | |
| return -EINVAL; | |
| } | |
| bcs = cs->bcs + ch; | |
| if (gigaset_get_channel(bcs) < 0) { | |
| dev_err(cs->dev, "ISDN_CMD_DIAL: channel not free\n"); | |
| return -EBUSY; | |
| } | |
| switch (bcs->proto2) { | |
| case L2_HDLC: | |
| bcs->rx_bufsize = SBUFSIZE; | |
| break; | |
| default: /* assume transparent */ | |
| bcs->rx_bufsize = TRANSBUFSIZE; | |
| } | |
| dev_kfree_skb(bcs->rx_skb); | |
| gigaset_new_rx_skb(bcs); | |
| commands = kzalloc(AT_NUM * (sizeof *commands), GFP_ATOMIC); | |
| if (!commands) { | |
| gigaset_free_channel(bcs); | |
| dev_err(cs->dev, "ISDN_CMD_DIAL: out of memory\n"); | |
| return -ENOMEM; | |
| } | |
| l = 3 + strlen(cntrl->parm.setup.phone); | |
| commands[AT_DIAL] = kmalloc(l, GFP_ATOMIC); | |
| if (!commands[AT_DIAL]) | |
| goto oom; | |
| if (cntrl->parm.setup.phone[0] == '*' && | |
| cntrl->parm.setup.phone[1] == '*') { | |
| /* internal call: translate ** prefix to CTP value */ | |
| commands[AT_TYPE] = kstrdup("^SCTP=0\r", GFP_ATOMIC); | |
| if (!commands[AT_TYPE]) | |
| goto oom; | |
| snprintf(commands[AT_DIAL], l, | |
| "D%s\r", cntrl->parm.setup.phone + 2); | |
| } else { | |
| commands[AT_TYPE] = kstrdup("^SCTP=1\r", GFP_ATOMIC); | |
| if (!commands[AT_TYPE]) | |
| goto oom; | |
| snprintf(commands[AT_DIAL], l, | |
| "D%s\r", cntrl->parm.setup.phone); | |
| } | |
| l = strlen(cntrl->parm.setup.eazmsn); | |
| if (l) { | |
| l += 8; | |
| commands[AT_MSN] = kmalloc(l, GFP_ATOMIC); | |
| if (!commands[AT_MSN]) | |
| goto oom; | |
| snprintf(commands[AT_MSN], l, "^SMSN=%s\r", | |
| cntrl->parm.setup.eazmsn); | |
| } | |
| switch (cntrl->parm.setup.si1) { | |
| case 1: /* audio */ | |
| /* BC = 9090A3: 3.1 kHz audio, A-law */ | |
| commands[AT_BC] = kstrdup("^SBC=9090A3\r", GFP_ATOMIC); | |
| if (!commands[AT_BC]) | |
| goto oom; | |
| break; | |
| case 7: /* data */ | |
| default: /* hope the app knows what it is doing */ | |
| /* BC = 8890: unrestricted digital information */ | |
| commands[AT_BC] = kstrdup("^SBC=8890\r", GFP_ATOMIC); | |
| if (!commands[AT_BC]) | |
| goto oom; | |
| } | |
| /* ToDo: other si1 values, inspect si2, set HLC/LLC */ | |
| commands[AT_PROTO] = kmalloc(9, GFP_ATOMIC); | |
| if (!commands[AT_PROTO]) | |
| goto oom; | |
| snprintf(commands[AT_PROTO], 9, "^SBPR=%u\r", bcs->proto2); | |
| commands[AT_ISO] = kmalloc(9, GFP_ATOMIC); | |
| if (!commands[AT_ISO]) | |
| goto oom; | |
| snprintf(commands[AT_ISO], 9, "^SISO=%u\r", | |
| (unsigned) bcs->channel + 1); | |
| if (!gigaset_add_event(cs, &bcs->at_state, EV_DIAL, commands, | |
| bcs->at_state.seq_index, NULL)) { | |
| for (i = 0; i < AT_NUM; ++i) | |
| kfree(commands[i]); | |
| kfree(commands); | |
| gigaset_free_channel(bcs); | |
| return -ENOMEM; | |
| } | |
| gigaset_schedule_event(cs); | |
| break; | |
| case ISDN_CMD_ACCEPTD: | |
| gig_dbg(DEBUG_CMD, "ISDN_CMD_ACCEPTD"); | |
| if (ch >= cs->channels) { | |
| dev_err(cs->dev, | |
| "ISDN_CMD_ACCEPTD: invalid channel (%d)\n", ch); | |
| return -EINVAL; | |
| } | |
| bcs = cs->bcs + ch; | |
| switch (bcs->proto2) { | |
| case L2_HDLC: | |
| bcs->rx_bufsize = SBUFSIZE; | |
| break; | |
| default: /* assume transparent */ | |
| bcs->rx_bufsize = TRANSBUFSIZE; | |
| } | |
| dev_kfree_skb(bcs->rx_skb); | |
| gigaset_new_rx_skb(bcs); | |
| if (!gigaset_add_event(cs, &bcs->at_state, | |
| EV_ACCEPT, NULL, 0, NULL)) | |
| return -ENOMEM; | |
| gigaset_schedule_event(cs); | |
| break; | |
| case ISDN_CMD_HANGUP: | |
| gig_dbg(DEBUG_CMD, "ISDN_CMD_HANGUP"); | |
| if (ch >= cs->channels) { | |
| dev_err(cs->dev, | |
| "ISDN_CMD_HANGUP: invalid channel (%d)\n", ch); | |
| return -EINVAL; | |
| } | |
| bcs = cs->bcs + ch; | |
| if (!gigaset_add_event(cs, &bcs->at_state, | |
| EV_HUP, NULL, 0, NULL)) | |
| return -ENOMEM; | |
| gigaset_schedule_event(cs); | |
| break; | |
| case ISDN_CMD_CLREAZ: /* Do not signal incoming signals */ | |
| dev_info(cs->dev, "ignoring ISDN_CMD_CLREAZ\n"); | |
| break; | |
| case ISDN_CMD_SETEAZ: /* Signal incoming calls for given MSN */ | |
| dev_info(cs->dev, "ignoring ISDN_CMD_SETEAZ (%s)\n", | |
| cntrl->parm.num); | |
| break; | |
| case ISDN_CMD_SETL2: /* Set L2 to given protocol */ | |
| if (ch >= cs->channels) { | |
| dev_err(cs->dev, | |
| "ISDN_CMD_SETL2: invalid channel (%d)\n", ch); | |
| return -EINVAL; | |
| } | |
| bcs = cs->bcs + ch; | |
| if (bcs->chstate & CHS_D_UP) { | |
| dev_err(cs->dev, | |
| "ISDN_CMD_SETL2: channel active (%d)\n", ch); | |
| return -EINVAL; | |
| } | |
| switch (cntrl->arg >> 8) { | |
| case ISDN_PROTO_L2_HDLC: | |
| gig_dbg(DEBUG_CMD, "ISDN_CMD_SETL2: setting L2_HDLC"); | |
| bcs->proto2 = L2_HDLC; | |
| break; | |
| case ISDN_PROTO_L2_TRANS: | |
| gig_dbg(DEBUG_CMD, "ISDN_CMD_SETL2: setting L2_VOICE"); | |
| bcs->proto2 = L2_VOICE; | |
| break; | |
| default: | |
| dev_err(cs->dev, | |
| "ISDN_CMD_SETL2: unsupported protocol (%lu)\n", | |
| cntrl->arg >> 8); | |
| return -EINVAL; | |
| } | |
| break; | |
| case ISDN_CMD_SETL3: /* Set L3 to given protocol */ | |
| gig_dbg(DEBUG_CMD, "ISDN_CMD_SETL3"); | |
| if (ch >= cs->channels) { | |
| dev_err(cs->dev, | |
| "ISDN_CMD_SETL3: invalid channel (%d)\n", ch); | |
| return -EINVAL; | |
| } | |
| if (cntrl->arg >> 8 != ISDN_PROTO_L3_TRANS) { | |
| dev_err(cs->dev, | |
| "ISDN_CMD_SETL3: unsupported protocol (%lu)\n", | |
| cntrl->arg >> 8); | |
| return -EINVAL; | |
| } | |
| break; | |
| default: | |
| gig_dbg(DEBUG_CMD, "unknown command %d from LL", | |
| cntrl->command); | |
| return -EINVAL; | |
| } | |
| return retval; | |
| oom: | |
| dev_err(bcs->cs->dev, "out of memory\n"); | |
| for (i = 0; i < AT_NUM; ++i) | |
| kfree(commands[i]); | |
| kfree(commands); | |
| gigaset_free_channel(bcs); | |
| return -ENOMEM; | |
| } | |
| static void gigaset_i4l_cmd(struct cardstate *cs, int cmd) | |
| { | |
| isdn_if *iif = cs->iif; | |
| isdn_ctrl command; | |
| command.driver = cs->myid; | |
| command.command = cmd; | |
| command.arg = 0; | |
| iif->statcallb(&command); | |
| } | |
| static void gigaset_i4l_channel_cmd(struct bc_state *bcs, int cmd) | |
| { | |
| isdn_if *iif = bcs->cs->iif; | |
| isdn_ctrl command; | |
| command.driver = bcs->cs->myid; | |
| command.command = cmd; | |
| command.arg = bcs->channel; | |
| iif->statcallb(&command); | |
| } | |
| /** | |
| * gigaset_isdn_icall() - signal incoming call | |
| * @at_state: connection state structure. | |
| * | |
| * Called by main module to notify the LL that an incoming call has been | |
| * received. @at_state contains the parameters of the call. | |
| * | |
| * Return value: call disposition (ICALL_*) | |
| */ | |
| int gigaset_isdn_icall(struct at_state_t *at_state) | |
| { | |
| struct cardstate *cs = at_state->cs; | |
| struct bc_state *bcs = at_state->bcs; | |
| isdn_if *iif = cs->iif; | |
| isdn_ctrl response; | |
| int retval; | |
| /* fill ICALL structure */ | |
| response.parm.setup.si1 = 0; /* default: unknown */ | |
| response.parm.setup.si2 = 0; | |
| response.parm.setup.screen = 0; | |
| response.parm.setup.plan = 0; | |
| if (!at_state->str_var[STR_ZBC]) { | |
| /* no BC (internal call): assume speech, A-law */ | |
| response.parm.setup.si1 = 1; | |
| } else if (!strcmp(at_state->str_var[STR_ZBC], "8890")) { | |
| /* unrestricted digital information */ | |
| response.parm.setup.si1 = 7; | |
| } else if (!strcmp(at_state->str_var[STR_ZBC], "8090A3")) { | |
| /* speech, A-law */ | |
| response.parm.setup.si1 = 1; | |
| } else if (!strcmp(at_state->str_var[STR_ZBC], "9090A3")) { | |
| /* 3,1 kHz audio, A-law */ | |
| response.parm.setup.si1 = 1; | |
| response.parm.setup.si2 = 2; | |
| } else { | |
| dev_warn(cs->dev, "RING ignored - unsupported BC %s\n", | |
| at_state->str_var[STR_ZBC]); | |
| return ICALL_IGNORE; | |
| } | |
| if (at_state->str_var[STR_NMBR]) { | |
| strlcpy(response.parm.setup.phone, at_state->str_var[STR_NMBR], | |
| sizeof response.parm.setup.phone); | |
| } else | |
| response.parm.setup.phone[0] = 0; | |
| if (at_state->str_var[STR_ZCPN]) { | |
| strlcpy(response.parm.setup.eazmsn, at_state->str_var[STR_ZCPN], | |
| sizeof response.parm.setup.eazmsn); | |
| } else | |
| response.parm.setup.eazmsn[0] = 0; | |
| if (!bcs) { | |
| dev_notice(cs->dev, "no channel for incoming call\n"); | |
| response.command = ISDN_STAT_ICALLW; | |
| response.arg = 0; | |
| } else { | |
| gig_dbg(DEBUG_CMD, "Sending ICALL"); | |
| response.command = ISDN_STAT_ICALL; | |
| response.arg = bcs->channel; | |
| } | |
| response.driver = cs->myid; | |
| retval = iif->statcallb(&response); | |
| gig_dbg(DEBUG_CMD, "Response: %d", retval); | |
| switch (retval) { | |
| case 0: /* no takers */ | |
| return ICALL_IGNORE; | |
| case 1: /* alerting */ | |
| bcs->chstate |= CHS_NOTIFY_LL; | |
| return ICALL_ACCEPT; | |
| case 2: /* reject */ | |
| return ICALL_REJECT; | |
| case 3: /* incomplete */ | |
| dev_warn(cs->dev, | |
| "LL requested unsupported feature: Incomplete Number\n"); | |
| return ICALL_IGNORE; | |
| case 4: /* proceeding */ | |
| /* Gigaset will send ALERTING anyway. | |
| * There doesn't seem to be a way to avoid this. | |
| */ | |
| return ICALL_ACCEPT; | |
| case 5: /* deflect */ | |
| dev_warn(cs->dev, | |
| "LL requested unsupported feature: Call Deflection\n"); | |
| return ICALL_IGNORE; | |
| default: | |
| dev_err(cs->dev, "LL error %d on ICALL\n", retval); | |
| return ICALL_IGNORE; | |
| } | |
| } | |
| /** | |
| * gigaset_isdn_connD() - signal D channel connect | |
| * @bcs: B channel descriptor structure. | |
| * | |
| * Called by main module to notify the LL that the D channel connection has | |
| * been established. | |
| */ | |
| void gigaset_isdn_connD(struct bc_state *bcs) | |
| { | |
| gig_dbg(DEBUG_CMD, "sending DCONN"); | |
| gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DCONN); | |
| } | |
| /** | |
| * gigaset_isdn_hupD() - signal D channel hangup | |
| * @bcs: B channel descriptor structure. | |
| * | |
| * Called by main module to notify the LL that the D channel connection has | |
| * been shut down. | |
| */ | |
| void gigaset_isdn_hupD(struct bc_state *bcs) | |
| { | |
| gig_dbg(DEBUG_CMD, "sending DHUP"); | |
| gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DHUP); | |
| } | |
| /** | |
| * gigaset_isdn_connB() - signal B channel connect | |
| * @bcs: B channel descriptor structure. | |
| * | |
| * Called by main module to notify the LL that the B channel connection has | |
| * been established. | |
| */ | |
| void gigaset_isdn_connB(struct bc_state *bcs) | |
| { | |
| gig_dbg(DEBUG_CMD, "sending BCONN"); | |
| gigaset_i4l_channel_cmd(bcs, ISDN_STAT_BCONN); | |
| } | |
| /** | |
| * gigaset_isdn_hupB() - signal B channel hangup | |
| * @bcs: B channel descriptor structure. | |
| * | |
| * Called by main module to notify the LL that the B channel connection has | |
| * been shut down. | |
| */ | |
| void gigaset_isdn_hupB(struct bc_state *bcs) | |
| { | |
| gig_dbg(DEBUG_CMD, "sending BHUP"); | |
| gigaset_i4l_channel_cmd(bcs, ISDN_STAT_BHUP); | |
| } | |
| /** | |
| * gigaset_isdn_start() - signal device availability | |
| * @cs: device descriptor structure. | |
| * | |
| * Called by main module to notify the LL that the device is available for | |
| * use. | |
| */ | |
| void gigaset_isdn_start(struct cardstate *cs) | |
| { | |
| gig_dbg(DEBUG_CMD, "sending RUN"); | |
| gigaset_i4l_cmd(cs, ISDN_STAT_RUN); | |
| } | |
| /** | |
| * gigaset_isdn_stop() - signal device unavailability | |
| * @cs: device descriptor structure. | |
| * | |
| * Called by main module to notify the LL that the device is no longer | |
| * available for use. | |
| */ | |
| void gigaset_isdn_stop(struct cardstate *cs) | |
| { | |
| gig_dbg(DEBUG_CMD, "sending STOP"); | |
| gigaset_i4l_cmd(cs, ISDN_STAT_STOP); | |
| } | |
| /** | |
| * gigaset_isdn_regdev() - register to LL | |
| * @cs: device descriptor structure. | |
| * @isdnid: device name. | |
| * | |
| * Return value: 0 on success, error code < 0 on failure | |
| */ | |
| int gigaset_isdn_regdev(struct cardstate *cs, const char *isdnid) | |
| { | |
| isdn_if *iif; | |
| iif = kmalloc(sizeof *iif, GFP_KERNEL); | |
| if (!iif) { | |
| pr_err("out of memory\n"); | |
| return -ENOMEM; | |
| } | |
| if (snprintf(iif->id, sizeof iif->id, "%s_%u", isdnid, cs->minor_index) | |
| >= sizeof iif->id) { | |
| pr_err("ID too long: %s\n", isdnid); | |
| kfree(iif); | |
| return -EINVAL; | |
| } | |
| iif->owner = THIS_MODULE; | |
| iif->channels = cs->channels; | |
| iif->maxbufsize = MAX_BUF_SIZE; | |
| iif->features = ISDN_FEATURE_L2_TRANS | | |
| ISDN_FEATURE_L2_HDLC | | |
| ISDN_FEATURE_L2_X75I | | |
| ISDN_FEATURE_L3_TRANS | | |
| ISDN_FEATURE_P_EURO; | |
| iif->hl_hdrlen = HW_HDR_LEN; /* Area for storing ack */ | |
| iif->command = command_from_LL; | |
| iif->writebuf_skb = writebuf_from_LL; | |
| iif->writecmd = NULL; /* Don't support isdnctrl */ | |
| iif->readstat = NULL; /* Don't support isdnctrl */ | |
| iif->rcvcallb_skb = NULL; /* Will be set by LL */ | |
| iif->statcallb = NULL; /* Will be set by LL */ | |
| if (!register_isdn(iif)) { | |
| pr_err("register_isdn failed\n"); | |
| kfree(iif); | |
| return -EINVAL; | |
| } | |
| cs->iif = iif; | |
| cs->myid = iif->channels; /* Set my device id */ | |
| cs->hw_hdr_len = HW_HDR_LEN; | |
| return 0; | |
| } | |
| /** | |
| * gigaset_isdn_unregdev() - unregister device from LL | |
| * @cs: device descriptor structure. | |
| */ | |
| void gigaset_isdn_unregdev(struct cardstate *cs) | |
| { | |
| gig_dbg(DEBUG_CMD, "sending UNLOAD"); | |
| gigaset_i4l_cmd(cs, ISDN_STAT_UNLOAD); | |
| kfree(cs->iif); | |
| cs->iif = NULL; | |
| } | |
| /** | |
| * gigaset_isdn_regdrv() - register driver to LL | |
| */ | |
| void gigaset_isdn_regdrv(void) | |
| { | |
| pr_info("ISDN4Linux interface\n"); | |
| /* nothing to do */ | |
| } | |
| /** | |
| * gigaset_isdn_unregdrv() - unregister driver from LL | |
| */ | |
| void gigaset_isdn_unregdrv(void) | |
| { | |
| /* nothing to do */ | |
| } |