| /* | |
| * lp5523.c - LP5523, LP55231 LED Driver | |
| * | |
| * Copyright (C) 2010 Nokia Corporation | |
| * Copyright (C) 2012 Texas Instruments | |
| * | |
| * Contact: Samu Onkalo <samu.p.onkalo@nokia.com> | |
| * Milo(Woogyom) Kim <milo.kim@ti.com> | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * version 2 as published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | |
| * 02110-1301 USA | |
| */ | |
| #include <linux/delay.h> | |
| #include <linux/firmware.h> | |
| #include <linux/i2c.h> | |
| #include <linux/leds.h> | |
| #include <linux/module.h> | |
| #include <linux/mutex.h> | |
| #include <linux/of.h> | |
| #include <linux/platform_data/leds-lp55xx.h> | |
| #include <linux/slab.h> | |
| #include "leds-lp55xx-common.h" | |
| #define LP5523_PROGRAM_LENGTH 32 /* bytes */ | |
| /* Memory is used like this: | |
| 0x00 engine 1 program | |
| 0x10 engine 2 program | |
| 0x20 engine 3 program | |
| 0x30 engine 1 muxing info | |
| 0x40 engine 2 muxing info | |
| 0x50 engine 3 muxing info | |
| */ | |
| #define LP5523_MAX_LEDS 9 | |
| /* Registers */ | |
| #define LP5523_REG_ENABLE 0x00 | |
| #define LP5523_REG_OP_MODE 0x01 | |
| #define LP5523_REG_ENABLE_LEDS_MSB 0x04 | |
| #define LP5523_REG_ENABLE_LEDS_LSB 0x05 | |
| #define LP5523_REG_LED_CTRL_BASE 0x06 | |
| #define LP5523_REG_LED_PWM_BASE 0x16 | |
| #define LP5523_REG_LED_CURRENT_BASE 0x26 | |
| #define LP5523_REG_CONFIG 0x36 | |
| #define LP5523_REG_STATUS 0x3A | |
| #define LP5523_REG_RESET 0x3D | |
| #define LP5523_REG_LED_TEST_CTRL 0x41 | |
| #define LP5523_REG_LED_TEST_ADC 0x42 | |
| #define LP5523_REG_MASTER_FADER_BASE 0x48 | |
| #define LP5523_REG_CH1_PROG_START 0x4C | |
| #define LP5523_REG_CH2_PROG_START 0x4D | |
| #define LP5523_REG_CH3_PROG_START 0x4E | |
| #define LP5523_REG_PROG_PAGE_SEL 0x4F | |
| #define LP5523_REG_PROG_MEM 0x50 | |
| /* Bit description in registers */ | |
| #define LP5523_ENABLE 0x40 | |
| #define LP5523_AUTO_INC 0x40 | |
| #define LP5523_PWR_SAVE 0x20 | |
| #define LP5523_PWM_PWR_SAVE 0x04 | |
| #define LP5523_CP_AUTO 0x18 | |
| #define LP5523_AUTO_CLK 0x02 | |
| #define LP5523_EN_LEDTEST 0x80 | |
| #define LP5523_LEDTEST_DONE 0x80 | |
| #define LP5523_RESET 0xFF | |
| #define LP5523_ADC_SHORTCIRC_LIM 80 | |
| #define LP5523_EXT_CLK_USED 0x08 | |
| #define LP5523_ENG_STATUS_MASK 0x07 | |
| #define LP5523_FADER_MAPPING_MASK 0xC0 | |
| #define LP5523_FADER_MAPPING_SHIFT 6 | |
| /* Memory Page Selection */ | |
| #define LP5523_PAGE_ENG1 0 | |
| #define LP5523_PAGE_ENG2 1 | |
| #define LP5523_PAGE_ENG3 2 | |
| #define LP5523_PAGE_MUX1 3 | |
| #define LP5523_PAGE_MUX2 4 | |
| #define LP5523_PAGE_MUX3 5 | |
| /* Program Memory Operations */ | |
| #define LP5523_MODE_ENG1_M 0x30 /* Operation Mode Register */ | |
| #define LP5523_MODE_ENG2_M 0x0C | |
| #define LP5523_MODE_ENG3_M 0x03 | |
| #define LP5523_LOAD_ENG1 0x10 | |
| #define LP5523_LOAD_ENG2 0x04 | |
| #define LP5523_LOAD_ENG3 0x01 | |
| #define LP5523_ENG1_IS_LOADING(mode) \ | |
| ((mode & LP5523_MODE_ENG1_M) == LP5523_LOAD_ENG1) | |
| #define LP5523_ENG2_IS_LOADING(mode) \ | |
| ((mode & LP5523_MODE_ENG2_M) == LP5523_LOAD_ENG2) | |
| #define LP5523_ENG3_IS_LOADING(mode) \ | |
| ((mode & LP5523_MODE_ENG3_M) == LP5523_LOAD_ENG3) | |
| #define LP5523_EXEC_ENG1_M 0x30 /* Enable Register */ | |
| #define LP5523_EXEC_ENG2_M 0x0C | |
| #define LP5523_EXEC_ENG3_M 0x03 | |
| #define LP5523_EXEC_M 0x3F | |
| #define LP5523_RUN_ENG1 0x20 | |
| #define LP5523_RUN_ENG2 0x08 | |
| #define LP5523_RUN_ENG3 0x02 | |
| #define LED_ACTIVE(mux, led) (!!(mux & (0x0001 << led))) | |
| enum lp5523_chip_id { | |
| LP5523, | |
| LP55231, | |
| }; | |
| static int lp5523_init_program_engine(struct lp55xx_chip *chip); | |
| static inline void lp5523_wait_opmode_done(void) | |
| { | |
| usleep_range(1000, 2000); | |
| } | |
| static void lp5523_set_led_current(struct lp55xx_led *led, u8 led_current) | |
| { | |
| led->led_current = led_current; | |
| lp55xx_write(led->chip, LP5523_REG_LED_CURRENT_BASE + led->chan_nr, | |
| led_current); | |
| } | |
| static int lp5523_post_init_device(struct lp55xx_chip *chip) | |
| { | |
| int ret; | |
| ret = lp55xx_write(chip, LP5523_REG_ENABLE, LP5523_ENABLE); | |
| if (ret) | |
| return ret; | |
| /* Chip startup time is 500 us, 1 - 2 ms gives some margin */ | |
| usleep_range(1000, 2000); | |
| ret = lp55xx_write(chip, LP5523_REG_CONFIG, | |
| LP5523_AUTO_INC | LP5523_PWR_SAVE | | |
| LP5523_CP_AUTO | LP5523_AUTO_CLK | | |
| LP5523_PWM_PWR_SAVE); | |
| if (ret) | |
| return ret; | |
| /* turn on all leds */ | |
| ret = lp55xx_write(chip, LP5523_REG_ENABLE_LEDS_MSB, 0x01); | |
| if (ret) | |
| return ret; | |
| ret = lp55xx_write(chip, LP5523_REG_ENABLE_LEDS_LSB, 0xff); | |
| if (ret) | |
| return ret; | |
| return lp5523_init_program_engine(chip); | |
| } | |
| static void lp5523_load_engine(struct lp55xx_chip *chip) | |
| { | |
| enum lp55xx_engine_index idx = chip->engine_idx; | |
| u8 mask[] = { | |
| [LP55XX_ENGINE_1] = LP5523_MODE_ENG1_M, | |
| [LP55XX_ENGINE_2] = LP5523_MODE_ENG2_M, | |
| [LP55XX_ENGINE_3] = LP5523_MODE_ENG3_M, | |
| }; | |
| u8 val[] = { | |
| [LP55XX_ENGINE_1] = LP5523_LOAD_ENG1, | |
| [LP55XX_ENGINE_2] = LP5523_LOAD_ENG2, | |
| [LP55XX_ENGINE_3] = LP5523_LOAD_ENG3, | |
| }; | |
| lp55xx_update_bits(chip, LP5523_REG_OP_MODE, mask[idx], val[idx]); | |
| lp5523_wait_opmode_done(); | |
| } | |
| static void lp5523_load_engine_and_select_page(struct lp55xx_chip *chip) | |
| { | |
| enum lp55xx_engine_index idx = chip->engine_idx; | |
| u8 page_sel[] = { | |
| [LP55XX_ENGINE_1] = LP5523_PAGE_ENG1, | |
| [LP55XX_ENGINE_2] = LP5523_PAGE_ENG2, | |
| [LP55XX_ENGINE_3] = LP5523_PAGE_ENG3, | |
| }; | |
| lp5523_load_engine(chip); | |
| lp55xx_write(chip, LP5523_REG_PROG_PAGE_SEL, page_sel[idx]); | |
| } | |
| static void lp5523_stop_all_engines(struct lp55xx_chip *chip) | |
| { | |
| lp55xx_write(chip, LP5523_REG_OP_MODE, 0); | |
| lp5523_wait_opmode_done(); | |
| } | |
| static void lp5523_stop_engine(struct lp55xx_chip *chip) | |
| { | |
| enum lp55xx_engine_index idx = chip->engine_idx; | |
| u8 mask[] = { | |
| [LP55XX_ENGINE_1] = LP5523_MODE_ENG1_M, | |
| [LP55XX_ENGINE_2] = LP5523_MODE_ENG2_M, | |
| [LP55XX_ENGINE_3] = LP5523_MODE_ENG3_M, | |
| }; | |
| lp55xx_update_bits(chip, LP5523_REG_OP_MODE, mask[idx], 0); | |
| lp5523_wait_opmode_done(); | |
| } | |
| static void lp5523_turn_off_channels(struct lp55xx_chip *chip) | |
| { | |
| int i; | |
| for (i = 0; i < LP5523_MAX_LEDS; i++) | |
| lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0); | |
| } | |
| static void lp5523_run_engine(struct lp55xx_chip *chip, bool start) | |
| { | |
| int ret; | |
| u8 mode; | |
| u8 exec; | |
| /* stop engine */ | |
| if (!start) { | |
| lp5523_stop_engine(chip); | |
| lp5523_turn_off_channels(chip); | |
| return; | |
| } | |
| /* | |
| * To run the engine, | |
| * operation mode and enable register should updated at the same time | |
| */ | |
| ret = lp55xx_read(chip, LP5523_REG_OP_MODE, &mode); | |
| if (ret) | |
| return; | |
| ret = lp55xx_read(chip, LP5523_REG_ENABLE, &exec); | |
| if (ret) | |
| return; | |
| /* change operation mode to RUN only when each engine is loading */ | |
| if (LP5523_ENG1_IS_LOADING(mode)) { | |
| mode = (mode & ~LP5523_MODE_ENG1_M) | LP5523_RUN_ENG1; | |
| exec = (exec & ~LP5523_EXEC_ENG1_M) | LP5523_RUN_ENG1; | |
| } | |
| if (LP5523_ENG2_IS_LOADING(mode)) { | |
| mode = (mode & ~LP5523_MODE_ENG2_M) | LP5523_RUN_ENG2; | |
| exec = (exec & ~LP5523_EXEC_ENG2_M) | LP5523_RUN_ENG2; | |
| } | |
| if (LP5523_ENG3_IS_LOADING(mode)) { | |
| mode = (mode & ~LP5523_MODE_ENG3_M) | LP5523_RUN_ENG3; | |
| exec = (exec & ~LP5523_EXEC_ENG3_M) | LP5523_RUN_ENG3; | |
| } | |
| lp55xx_write(chip, LP5523_REG_OP_MODE, mode); | |
| lp5523_wait_opmode_done(); | |
| lp55xx_update_bits(chip, LP5523_REG_ENABLE, LP5523_EXEC_M, exec); | |
| } | |
| static int lp5523_init_program_engine(struct lp55xx_chip *chip) | |
| { | |
| int i; | |
| int j; | |
| int ret; | |
| u8 status; | |
| /* one pattern per engine setting LED MUX start and stop addresses */ | |
| static const u8 pattern[][LP5523_PROGRAM_LENGTH] = { | |
| { 0x9c, 0x30, 0x9c, 0xb0, 0x9d, 0x80, 0xd8, 0x00, 0}, | |
| { 0x9c, 0x40, 0x9c, 0xc0, 0x9d, 0x80, 0xd8, 0x00, 0}, | |
| { 0x9c, 0x50, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0}, | |
| }; | |
| /* hardcode 32 bytes of memory for each engine from program memory */ | |
| ret = lp55xx_write(chip, LP5523_REG_CH1_PROG_START, 0x00); | |
| if (ret) | |
| return ret; | |
| ret = lp55xx_write(chip, LP5523_REG_CH2_PROG_START, 0x10); | |
| if (ret) | |
| return ret; | |
| ret = lp55xx_write(chip, LP5523_REG_CH3_PROG_START, 0x20); | |
| if (ret) | |
| return ret; | |
| /* write LED MUX address space for each engine */ | |
| for (i = LP55XX_ENGINE_1; i <= LP55XX_ENGINE_3; i++) { | |
| chip->engine_idx = i; | |
| lp5523_load_engine_and_select_page(chip); | |
| for (j = 0; j < LP5523_PROGRAM_LENGTH; j++) { | |
| ret = lp55xx_write(chip, LP5523_REG_PROG_MEM + j, | |
| pattern[i - 1][j]); | |
| if (ret) | |
| goto out; | |
| } | |
| } | |
| lp5523_run_engine(chip, true); | |
| /* Let the programs run for couple of ms and check the engine status */ | |
| usleep_range(3000, 6000); | |
| lp55xx_read(chip, LP5523_REG_STATUS, &status); | |
| status &= LP5523_ENG_STATUS_MASK; | |
| if (status != LP5523_ENG_STATUS_MASK) { | |
| dev_err(&chip->cl->dev, | |
| "cound not configure LED engine, status = 0x%.2x\n", | |
| status); | |
| ret = -1; | |
| } | |
| out: | |
| lp5523_stop_all_engines(chip); | |
| return ret; | |
| } | |
| static int lp5523_update_program_memory(struct lp55xx_chip *chip, | |
| const u8 *data, size_t size) | |
| { | |
| u8 pattern[LP5523_PROGRAM_LENGTH] = {0}; | |
| unsigned cmd; | |
| char c[3]; | |
| int nrchars; | |
| int ret; | |
| int offset = 0; | |
| int i = 0; | |
| while ((offset < size - 1) && (i < LP5523_PROGRAM_LENGTH)) { | |
| /* separate sscanfs because length is working only for %s */ | |
| ret = sscanf(data + offset, "%2s%n ", c, &nrchars); | |
| if (ret != 1) | |
| goto err; | |
| ret = sscanf(c, "%2x", &cmd); | |
| if (ret != 1) | |
| goto err; | |
| pattern[i] = (u8)cmd; | |
| offset += nrchars; | |
| i++; | |
| } | |
| /* Each instruction is 16bit long. Check that length is even */ | |
| if (i % 2) | |
| goto err; | |
| for (i = 0; i < LP5523_PROGRAM_LENGTH; i++) { | |
| ret = lp55xx_write(chip, LP5523_REG_PROG_MEM + i, pattern[i]); | |
| if (ret) | |
| return -EINVAL; | |
| } | |
| return size; | |
| err: | |
| dev_err(&chip->cl->dev, "wrong pattern format\n"); | |
| return -EINVAL; | |
| } | |
| static void lp5523_firmware_loaded(struct lp55xx_chip *chip) | |
| { | |
| const struct firmware *fw = chip->fw; | |
| if (fw->size > LP5523_PROGRAM_LENGTH) { | |
| dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n", | |
| fw->size); | |
| return; | |
| } | |
| /* | |
| * Program momery sequence | |
| * 1) set engine mode to "LOAD" | |
| * 2) write firmware data into program memory | |
| */ | |
| lp5523_load_engine_and_select_page(chip); | |
| lp5523_update_program_memory(chip, fw->data, fw->size); | |
| } | |
| static ssize_t show_engine_mode(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf, int nr) | |
| { | |
| struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | |
| struct lp55xx_chip *chip = led->chip; | |
| enum lp55xx_engine_mode mode = chip->engines[nr - 1].mode; | |
| switch (mode) { | |
| case LP55XX_ENGINE_RUN: | |
| return sprintf(buf, "run\n"); | |
| case LP55XX_ENGINE_LOAD: | |
| return sprintf(buf, "load\n"); | |
| case LP55XX_ENGINE_DISABLED: | |
| default: | |
| return sprintf(buf, "disabled\n"); | |
| } | |
| } | |
| show_mode(1) | |
| show_mode(2) | |
| show_mode(3) | |
| static ssize_t store_engine_mode(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t len, int nr) | |
| { | |
| struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | |
| struct lp55xx_chip *chip = led->chip; | |
| struct lp55xx_engine *engine = &chip->engines[nr - 1]; | |
| mutex_lock(&chip->lock); | |
| chip->engine_idx = nr; | |
| if (!strncmp(buf, "run", 3)) { | |
| lp5523_run_engine(chip, true); | |
| engine->mode = LP55XX_ENGINE_RUN; | |
| } else if (!strncmp(buf, "load", 4)) { | |
| lp5523_stop_engine(chip); | |
| lp5523_load_engine(chip); | |
| engine->mode = LP55XX_ENGINE_LOAD; | |
| } else if (!strncmp(buf, "disabled", 8)) { | |
| lp5523_stop_engine(chip); | |
| engine->mode = LP55XX_ENGINE_DISABLED; | |
| } | |
| mutex_unlock(&chip->lock); | |
| return len; | |
| } | |
| store_mode(1) | |
| store_mode(2) | |
| store_mode(3) | |
| static int lp5523_mux_parse(const char *buf, u16 *mux, size_t len) | |
| { | |
| u16 tmp_mux = 0; | |
| int i; | |
| len = min_t(int, len, LP5523_MAX_LEDS); | |
| for (i = 0; i < len; i++) { | |
| switch (buf[i]) { | |
| case '1': | |
| tmp_mux |= (1 << i); | |
| break; | |
| case '0': | |
| break; | |
| case '\n': | |
| i = len; | |
| break; | |
| default: | |
| return -1; | |
| } | |
| } | |
| *mux = tmp_mux; | |
| return 0; | |
| } | |
| static void lp5523_mux_to_array(u16 led_mux, char *array) | |
| { | |
| int i, pos = 0; | |
| for (i = 0; i < LP5523_MAX_LEDS; i++) | |
| pos += sprintf(array + pos, "%x", LED_ACTIVE(led_mux, i)); | |
| array[pos] = '\0'; | |
| } | |
| static ssize_t show_engine_leds(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf, int nr) | |
| { | |
| struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | |
| struct lp55xx_chip *chip = led->chip; | |
| char mux[LP5523_MAX_LEDS + 1]; | |
| lp5523_mux_to_array(chip->engines[nr - 1].led_mux, mux); | |
| return sprintf(buf, "%s\n", mux); | |
| } | |
| show_leds(1) | |
| show_leds(2) | |
| show_leds(3) | |
| static int lp5523_load_mux(struct lp55xx_chip *chip, u16 mux, int nr) | |
| { | |
| struct lp55xx_engine *engine = &chip->engines[nr - 1]; | |
| int ret; | |
| u8 mux_page[] = { | |
| [LP55XX_ENGINE_1] = LP5523_PAGE_MUX1, | |
| [LP55XX_ENGINE_2] = LP5523_PAGE_MUX2, | |
| [LP55XX_ENGINE_3] = LP5523_PAGE_MUX3, | |
| }; | |
| lp5523_load_engine(chip); | |
| ret = lp55xx_write(chip, LP5523_REG_PROG_PAGE_SEL, mux_page[nr]); | |
| if (ret) | |
| return ret; | |
| ret = lp55xx_write(chip, LP5523_REG_PROG_MEM , (u8)(mux >> 8)); | |
| if (ret) | |
| return ret; | |
| ret = lp55xx_write(chip, LP5523_REG_PROG_MEM + 1, (u8)(mux)); | |
| if (ret) | |
| return ret; | |
| engine->led_mux = mux; | |
| return 0; | |
| } | |
| static ssize_t store_engine_leds(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t len, int nr) | |
| { | |
| struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | |
| struct lp55xx_chip *chip = led->chip; | |
| struct lp55xx_engine *engine = &chip->engines[nr - 1]; | |
| u16 mux = 0; | |
| ssize_t ret; | |
| if (lp5523_mux_parse(buf, &mux, len)) | |
| return -EINVAL; | |
| mutex_lock(&chip->lock); | |
| chip->engine_idx = nr; | |
| ret = -EINVAL; | |
| if (engine->mode != LP55XX_ENGINE_LOAD) | |
| goto leave; | |
| if (lp5523_load_mux(chip, mux, nr)) | |
| goto leave; | |
| ret = len; | |
| leave: | |
| mutex_unlock(&chip->lock); | |
| return ret; | |
| } | |
| store_leds(1) | |
| store_leds(2) | |
| store_leds(3) | |
| static ssize_t store_engine_load(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t len, int nr) | |
| { | |
| struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | |
| struct lp55xx_chip *chip = led->chip; | |
| int ret; | |
| mutex_lock(&chip->lock); | |
| chip->engine_idx = nr; | |
| lp5523_load_engine_and_select_page(chip); | |
| ret = lp5523_update_program_memory(chip, buf, len); | |
| mutex_unlock(&chip->lock); | |
| return ret; | |
| } | |
| store_load(1) | |
| store_load(2) | |
| store_load(3) | |
| static ssize_t lp5523_selftest(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | |
| struct lp55xx_chip *chip = led->chip; | |
| struct lp55xx_platform_data *pdata = chip->pdata; | |
| int i, ret, pos = 0; | |
| u8 status, adc, vdd; | |
| mutex_lock(&chip->lock); | |
| ret = lp55xx_read(chip, LP5523_REG_STATUS, &status); | |
| if (ret < 0) | |
| goto fail; | |
| /* Check that ext clock is really in use if requested */ | |
| if (pdata->clock_mode == LP55XX_CLOCK_EXT) { | |
| if ((status & LP5523_EXT_CLK_USED) == 0) | |
| goto fail; | |
| } | |
| /* Measure VDD (i.e. VBAT) first (channel 16 corresponds to VDD) */ | |
| lp55xx_write(chip, LP5523_REG_LED_TEST_CTRL, LP5523_EN_LEDTEST | 16); | |
| usleep_range(3000, 6000); /* ADC conversion time is typically 2.7 ms */ | |
| ret = lp55xx_read(chip, LP5523_REG_STATUS, &status); | |
| if (ret < 0) | |
| goto fail; | |
| if (!(status & LP5523_LEDTEST_DONE)) | |
| usleep_range(3000, 6000); /* Was not ready. Wait little bit */ | |
| ret = lp55xx_read(chip, LP5523_REG_LED_TEST_ADC, &vdd); | |
| if (ret < 0) | |
| goto fail; | |
| vdd--; /* There may be some fluctuation in measurement */ | |
| for (i = 0; i < LP5523_MAX_LEDS; i++) { | |
| /* Skip non-existing channels */ | |
| if (pdata->led_config[i].led_current == 0) | |
| continue; | |
| /* Set default current */ | |
| lp55xx_write(chip, LP5523_REG_LED_CURRENT_BASE + i, | |
| pdata->led_config[i].led_current); | |
| lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0xff); | |
| /* let current stabilize 2 - 4ms before measurements start */ | |
| usleep_range(2000, 4000); | |
| lp55xx_write(chip, LP5523_REG_LED_TEST_CTRL, | |
| LP5523_EN_LEDTEST | i); | |
| /* ADC conversion time is 2.7 ms typically */ | |
| usleep_range(3000, 6000); | |
| ret = lp55xx_read(chip, LP5523_REG_STATUS, &status); | |
| if (ret < 0) | |
| goto fail; | |
| if (!(status & LP5523_LEDTEST_DONE)) | |
| usleep_range(3000, 6000);/* Was not ready. Wait. */ | |
| ret = lp55xx_read(chip, LP5523_REG_LED_TEST_ADC, &adc); | |
| if (ret < 0) | |
| goto fail; | |
| if (adc >= vdd || adc < LP5523_ADC_SHORTCIRC_LIM) | |
| pos += sprintf(buf + pos, "LED %d FAIL\n", i); | |
| lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0x00); | |
| /* Restore current */ | |
| lp55xx_write(chip, LP5523_REG_LED_CURRENT_BASE + i, | |
| led->led_current); | |
| led++; | |
| } | |
| if (pos == 0) | |
| pos = sprintf(buf, "OK\n"); | |
| goto release_lock; | |
| fail: | |
| pos = sprintf(buf, "FAIL\n"); | |
| release_lock: | |
| mutex_unlock(&chip->lock); | |
| return pos; | |
| } | |
| #define show_fader(nr) \ | |
| static ssize_t show_master_fader##nr(struct device *dev, \ | |
| struct device_attribute *attr, \ | |
| char *buf) \ | |
| { \ | |
| return show_master_fader(dev, attr, buf, nr); \ | |
| } | |
| #define store_fader(nr) \ | |
| static ssize_t store_master_fader##nr(struct device *dev, \ | |
| struct device_attribute *attr, \ | |
| const char *buf, size_t len) \ | |
| { \ | |
| return store_master_fader(dev, attr, buf, len, nr); \ | |
| } | |
| static ssize_t show_master_fader(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf, int nr) | |
| { | |
| struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | |
| struct lp55xx_chip *chip = led->chip; | |
| int ret; | |
| u8 val; | |
| mutex_lock(&chip->lock); | |
| ret = lp55xx_read(chip, LP5523_REG_MASTER_FADER_BASE + nr - 1, &val); | |
| mutex_unlock(&chip->lock); | |
| if (ret == 0) | |
| ret = sprintf(buf, "%u\n", val); | |
| return ret; | |
| } | |
| show_fader(1) | |
| show_fader(2) | |
| show_fader(3) | |
| static ssize_t store_master_fader(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t len, int nr) | |
| { | |
| struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | |
| struct lp55xx_chip *chip = led->chip; | |
| int ret; | |
| unsigned long val; | |
| if (kstrtoul(buf, 0, &val)) | |
| return -EINVAL; | |
| if (val > 0xff) | |
| return -EINVAL; | |
| mutex_lock(&chip->lock); | |
| ret = lp55xx_write(chip, LP5523_REG_MASTER_FADER_BASE + nr - 1, | |
| (u8)val); | |
| mutex_unlock(&chip->lock); | |
| if (ret == 0) | |
| ret = len; | |
| return ret; | |
| } | |
| store_fader(1) | |
| store_fader(2) | |
| store_fader(3) | |
| static ssize_t show_master_fader_leds(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | |
| struct lp55xx_chip *chip = led->chip; | |
| int i, ret, pos = 0; | |
| u8 val; | |
| mutex_lock(&chip->lock); | |
| for (i = 0; i < LP5523_MAX_LEDS; i++) { | |
| ret = lp55xx_read(chip, LP5523_REG_LED_CTRL_BASE + i, &val); | |
| if (ret) | |
| goto leave; | |
| val = (val & LP5523_FADER_MAPPING_MASK) | |
| >> LP5523_FADER_MAPPING_SHIFT; | |
| if (val > 3) { | |
| ret = -EINVAL; | |
| goto leave; | |
| } | |
| buf[pos++] = val + '0'; | |
| } | |
| buf[pos++] = '\n'; | |
| ret = pos; | |
| leave: | |
| mutex_unlock(&chip->lock); | |
| return ret; | |
| } | |
| static ssize_t store_master_fader_leds(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t len) | |
| { | |
| struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | |
| struct lp55xx_chip *chip = led->chip; | |
| int i, n, ret; | |
| u8 val; | |
| n = min_t(int, len, LP5523_MAX_LEDS); | |
| mutex_lock(&chip->lock); | |
| for (i = 0; i < n; i++) { | |
| if (buf[i] >= '0' && buf[i] <= '3') { | |
| val = (buf[i] - '0') << LP5523_FADER_MAPPING_SHIFT; | |
| ret = lp55xx_update_bits(chip, | |
| LP5523_REG_LED_CTRL_BASE + i, | |
| LP5523_FADER_MAPPING_MASK, | |
| val); | |
| if (ret) | |
| goto leave; | |
| } else { | |
| ret = -EINVAL; | |
| goto leave; | |
| } | |
| } | |
| ret = len; | |
| leave: | |
| mutex_unlock(&chip->lock); | |
| return ret; | |
| } | |
| static int lp5523_led_brightness(struct lp55xx_led *led) | |
| { | |
| struct lp55xx_chip *chip = led->chip; | |
| int ret; | |
| mutex_lock(&chip->lock); | |
| ret = lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + led->chan_nr, | |
| led->brightness); | |
| mutex_unlock(&chip->lock); | |
| return ret; | |
| } | |
| static LP55XX_DEV_ATTR_RW(engine1_mode, show_engine1_mode, store_engine1_mode); | |
| static LP55XX_DEV_ATTR_RW(engine2_mode, show_engine2_mode, store_engine2_mode); | |
| static LP55XX_DEV_ATTR_RW(engine3_mode, show_engine3_mode, store_engine3_mode); | |
| static LP55XX_DEV_ATTR_RW(engine1_leds, show_engine1_leds, store_engine1_leds); | |
| static LP55XX_DEV_ATTR_RW(engine2_leds, show_engine2_leds, store_engine2_leds); | |
| static LP55XX_DEV_ATTR_RW(engine3_leds, show_engine3_leds, store_engine3_leds); | |
| static LP55XX_DEV_ATTR_WO(engine1_load, store_engine1_load); | |
| static LP55XX_DEV_ATTR_WO(engine2_load, store_engine2_load); | |
| static LP55XX_DEV_ATTR_WO(engine3_load, store_engine3_load); | |
| static LP55XX_DEV_ATTR_RO(selftest, lp5523_selftest); | |
| static LP55XX_DEV_ATTR_RW(master_fader1, show_master_fader1, | |
| store_master_fader1); | |
| static LP55XX_DEV_ATTR_RW(master_fader2, show_master_fader2, | |
| store_master_fader2); | |
| static LP55XX_DEV_ATTR_RW(master_fader3, show_master_fader3, | |
| store_master_fader3); | |
| static LP55XX_DEV_ATTR_RW(master_fader_leds, show_master_fader_leds, | |
| store_master_fader_leds); | |
| static struct attribute *lp5523_attributes[] = { | |
| &dev_attr_engine1_mode.attr, | |
| &dev_attr_engine2_mode.attr, | |
| &dev_attr_engine3_mode.attr, | |
| &dev_attr_engine1_load.attr, | |
| &dev_attr_engine2_load.attr, | |
| &dev_attr_engine3_load.attr, | |
| &dev_attr_engine1_leds.attr, | |
| &dev_attr_engine2_leds.attr, | |
| &dev_attr_engine3_leds.attr, | |
| &dev_attr_selftest.attr, | |
| &dev_attr_master_fader1.attr, | |
| &dev_attr_master_fader2.attr, | |
| &dev_attr_master_fader3.attr, | |
| &dev_attr_master_fader_leds.attr, | |
| NULL, | |
| }; | |
| static const struct attribute_group lp5523_group = { | |
| .attrs = lp5523_attributes, | |
| }; | |
| /* Chip specific configurations */ | |
| static struct lp55xx_device_config lp5523_cfg = { | |
| .reset = { | |
| .addr = LP5523_REG_RESET, | |
| .val = LP5523_RESET, | |
| }, | |
| .enable = { | |
| .addr = LP5523_REG_ENABLE, | |
| .val = LP5523_ENABLE, | |
| }, | |
| .max_channel = LP5523_MAX_LEDS, | |
| .post_init_device = lp5523_post_init_device, | |
| .brightness_fn = lp5523_led_brightness, | |
| .set_led_current = lp5523_set_led_current, | |
| .firmware_cb = lp5523_firmware_loaded, | |
| .run_engine = lp5523_run_engine, | |
| .dev_attr_group = &lp5523_group, | |
| }; | |
| static int lp5523_probe(struct i2c_client *client, | |
| const struct i2c_device_id *id) | |
| { | |
| int ret; | |
| struct lp55xx_chip *chip; | |
| struct lp55xx_led *led; | |
| struct lp55xx_platform_data *pdata = dev_get_platdata(&client->dev); | |
| struct device_node *np = client->dev.of_node; | |
| if (!pdata) { | |
| if (np) { | |
| pdata = lp55xx_of_populate_pdata(&client->dev, np); | |
| if (IS_ERR(pdata)) | |
| return PTR_ERR(pdata); | |
| } else { | |
| dev_err(&client->dev, "no platform data\n"); | |
| return -EINVAL; | |
| } | |
| } | |
| chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); | |
| if (!chip) | |
| return -ENOMEM; | |
| led = devm_kzalloc(&client->dev, | |
| sizeof(*led) * pdata->num_channels, GFP_KERNEL); | |
| if (!led) | |
| return -ENOMEM; | |
| chip->cl = client; | |
| chip->pdata = pdata; | |
| chip->cfg = &lp5523_cfg; | |
| mutex_init(&chip->lock); | |
| i2c_set_clientdata(client, led); | |
| ret = lp55xx_init_device(chip); | |
| if (ret) | |
| goto err_init; | |
| dev_info(&client->dev, "%s Programmable led chip found\n", id->name); | |
| ret = lp55xx_register_leds(led, chip); | |
| if (ret) | |
| goto err_register_leds; | |
| ret = lp55xx_register_sysfs(chip); | |
| if (ret) { | |
| dev_err(&client->dev, "registering sysfs failed\n"); | |
| goto err_register_sysfs; | |
| } | |
| return 0; | |
| err_register_sysfs: | |
| lp55xx_unregister_leds(led, chip); | |
| err_register_leds: | |
| lp55xx_deinit_device(chip); | |
| err_init: | |
| return ret; | |
| } | |
| static int lp5523_remove(struct i2c_client *client) | |
| { | |
| struct lp55xx_led *led = i2c_get_clientdata(client); | |
| struct lp55xx_chip *chip = led->chip; | |
| lp5523_stop_all_engines(chip); | |
| lp55xx_unregister_sysfs(chip); | |
| lp55xx_unregister_leds(led, chip); | |
| lp55xx_deinit_device(chip); | |
| return 0; | |
| } | |
| static const struct i2c_device_id lp5523_id[] = { | |
| { "lp5523", LP5523 }, | |
| { "lp55231", LP55231 }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, lp5523_id); | |
| #ifdef CONFIG_OF | |
| static const struct of_device_id of_lp5523_leds_match[] = { | |
| { .compatible = "national,lp5523", }, | |
| { .compatible = "ti,lp55231", }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, of_lp5523_leds_match); | |
| #endif | |
| static struct i2c_driver lp5523_driver = { | |
| .driver = { | |
| .name = "lp5523x", | |
| .of_match_table = of_match_ptr(of_lp5523_leds_match), | |
| }, | |
| .probe = lp5523_probe, | |
| .remove = lp5523_remove, | |
| .id_table = lp5523_id, | |
| }; | |
| module_i2c_driver(lp5523_driver); | |
| MODULE_AUTHOR("Mathias Nyman <mathias.nyman@nokia.com>"); | |
| MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>"); | |
| MODULE_DESCRIPTION("LP5523 LED engine"); | |
| MODULE_LICENSE("GPL"); |