| /* | |
| * LP5521/LP5523/LP55231/LP5562 Common Driver | |
| * | |
| * Copyright 2012 Texas Instruments | |
| * | |
| * Author: Milo(Woogyom) Kim <milo.kim@ti.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| * | |
| * Derived from leds-lp5521.c, leds-lp5523.c | |
| */ | |
| #include <linux/clk.h> | |
| #include <linux/delay.h> | |
| #include <linux/firmware.h> | |
| #include <linux/i2c.h> | |
| #include <linux/leds.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_data/leds-lp55xx.h> | |
| #include <linux/slab.h> | |
| #include <linux/gpio.h> | |
| #include <linux/of_gpio.h> | |
| #include "leds-lp55xx-common.h" | |
| /* External clock rate */ | |
| #define LP55XX_CLK_32K 32768 | |
| static struct lp55xx_led *cdev_to_lp55xx_led(struct led_classdev *cdev) | |
| { | |
| return container_of(cdev, struct lp55xx_led, cdev); | |
| } | |
| static struct lp55xx_led *dev_to_lp55xx_led(struct device *dev) | |
| { | |
| return cdev_to_lp55xx_led(dev_get_drvdata(dev)); | |
| } | |
| static void lp55xx_reset_device(struct lp55xx_chip *chip) | |
| { | |
| struct lp55xx_device_config *cfg = chip->cfg; | |
| u8 addr = cfg->reset.addr; | |
| u8 val = cfg->reset.val; | |
| /* no error checking here because no ACK from the device after reset */ | |
| lp55xx_write(chip, addr, val); | |
| } | |
| static int lp55xx_detect_device(struct lp55xx_chip *chip) | |
| { | |
| struct lp55xx_device_config *cfg = chip->cfg; | |
| u8 addr = cfg->enable.addr; | |
| u8 val = cfg->enable.val; | |
| int ret; | |
| ret = lp55xx_write(chip, addr, val); | |
| if (ret) | |
| return ret; | |
| usleep_range(1000, 2000); | |
| ret = lp55xx_read(chip, addr, &val); | |
| if (ret) | |
| return ret; | |
| if (val != cfg->enable.val) | |
| return -ENODEV; | |
| return 0; | |
| } | |
| static int lp55xx_post_init_device(struct lp55xx_chip *chip) | |
| { | |
| struct lp55xx_device_config *cfg = chip->cfg; | |
| if (!cfg->post_init_device) | |
| return 0; | |
| return cfg->post_init_device(chip); | |
| } | |
| static ssize_t lp55xx_show_current(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct lp55xx_led *led = dev_to_lp55xx_led(dev); | |
| return scnprintf(buf, PAGE_SIZE, "%d\n", led->led_current); | |
| } | |
| static ssize_t lp55xx_store_current(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t len) | |
| { | |
| struct lp55xx_led *led = dev_to_lp55xx_led(dev); | |
| struct lp55xx_chip *chip = led->chip; | |
| unsigned long curr; | |
| if (kstrtoul(buf, 0, &curr)) | |
| return -EINVAL; | |
| if (curr > led->max_current) | |
| return -EINVAL; | |
| if (!chip->cfg->set_led_current) | |
| return len; | |
| mutex_lock(&chip->lock); | |
| chip->cfg->set_led_current(led, (u8)curr); | |
| mutex_unlock(&chip->lock); | |
| return len; | |
| } | |
| static ssize_t lp55xx_show_max_current(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct lp55xx_led *led = dev_to_lp55xx_led(dev); | |
| return scnprintf(buf, PAGE_SIZE, "%d\n", led->max_current); | |
| } | |
| static DEVICE_ATTR(led_current, S_IRUGO | S_IWUSR, lp55xx_show_current, | |
| lp55xx_store_current); | |
| static DEVICE_ATTR(max_current, S_IRUGO , lp55xx_show_max_current, NULL); | |
| static struct attribute *lp55xx_led_attrs[] = { | |
| &dev_attr_led_current.attr, | |
| &dev_attr_max_current.attr, | |
| NULL, | |
| }; | |
| ATTRIBUTE_GROUPS(lp55xx_led); | |
| static int lp55xx_set_brightness(struct led_classdev *cdev, | |
| enum led_brightness brightness) | |
| { | |
| struct lp55xx_led *led = cdev_to_lp55xx_led(cdev); | |
| struct lp55xx_device_config *cfg = led->chip->cfg; | |
| led->brightness = (u8)brightness; | |
| return cfg->brightness_fn(led); | |
| } | |
| static int lp55xx_init_led(struct lp55xx_led *led, | |
| struct lp55xx_chip *chip, int chan) | |
| { | |
| struct lp55xx_platform_data *pdata = chip->pdata; | |
| struct lp55xx_device_config *cfg = chip->cfg; | |
| struct device *dev = &chip->cl->dev; | |
| char name[32]; | |
| int ret; | |
| int max_channel = cfg->max_channel; | |
| if (chan >= max_channel) { | |
| dev_err(dev, "invalid channel: %d / %d\n", chan, max_channel); | |
| return -EINVAL; | |
| } | |
| if (pdata->led_config[chan].led_current == 0) | |
| return 0; | |
| led->led_current = pdata->led_config[chan].led_current; | |
| led->max_current = pdata->led_config[chan].max_current; | |
| led->chan_nr = pdata->led_config[chan].chan_nr; | |
| led->cdev.default_trigger = pdata->led_config[chan].default_trigger; | |
| if (led->chan_nr >= max_channel) { | |
| dev_err(dev, "Use channel numbers between 0 and %d\n", | |
| max_channel - 1); | |
| return -EINVAL; | |
| } | |
| led->cdev.brightness_set_blocking = lp55xx_set_brightness; | |
| led->cdev.groups = lp55xx_led_groups; | |
| if (pdata->led_config[chan].name) { | |
| led->cdev.name = pdata->led_config[chan].name; | |
| } else { | |
| snprintf(name, sizeof(name), "%s:channel%d", | |
| pdata->label ? : chip->cl->name, chan); | |
| led->cdev.name = name; | |
| } | |
| ret = led_classdev_register(dev, &led->cdev); | |
| if (ret) { | |
| dev_err(dev, "led register err: %d\n", ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static void lp55xx_firmware_loaded(const struct firmware *fw, void *context) | |
| { | |
| struct lp55xx_chip *chip = context; | |
| struct device *dev = &chip->cl->dev; | |
| enum lp55xx_engine_index idx = chip->engine_idx; | |
| if (!fw) { | |
| dev_err(dev, "firmware request failed\n"); | |
| goto out; | |
| } | |
| /* handling firmware data is chip dependent */ | |
| mutex_lock(&chip->lock); | |
| chip->engines[idx - 1].mode = LP55XX_ENGINE_LOAD; | |
| chip->fw = fw; | |
| if (chip->cfg->firmware_cb) | |
| chip->cfg->firmware_cb(chip); | |
| mutex_unlock(&chip->lock); | |
| out: | |
| /* firmware should be released for other channel use */ | |
| release_firmware(chip->fw); | |
| } | |
| static int lp55xx_request_firmware(struct lp55xx_chip *chip) | |
| { | |
| const char *name = chip->cl->name; | |
| struct device *dev = &chip->cl->dev; | |
| return request_firmware_nowait(THIS_MODULE, false, name, dev, | |
| GFP_KERNEL, chip, lp55xx_firmware_loaded); | |
| } | |
| static ssize_t lp55xx_show_engine_select(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | |
| struct lp55xx_chip *chip = led->chip; | |
| return sprintf(buf, "%d\n", chip->engine_idx); | |
| } | |
| static ssize_t lp55xx_store_engine_select(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t len) | |
| { | |
| struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | |
| struct lp55xx_chip *chip = led->chip; | |
| unsigned long val; | |
| int ret; | |
| if (kstrtoul(buf, 0, &val)) | |
| return -EINVAL; | |
| /* select the engine to be run */ | |
| switch (val) { | |
| case LP55XX_ENGINE_1: | |
| case LP55XX_ENGINE_2: | |
| case LP55XX_ENGINE_3: | |
| mutex_lock(&chip->lock); | |
| chip->engine_idx = val; | |
| ret = lp55xx_request_firmware(chip); | |
| mutex_unlock(&chip->lock); | |
| break; | |
| default: | |
| dev_err(dev, "%lu: invalid engine index. (1, 2, 3)\n", val); | |
| return -EINVAL; | |
| } | |
| if (ret) { | |
| dev_err(dev, "request firmware err: %d\n", ret); | |
| return ret; | |
| } | |
| return len; | |
| } | |
| static inline void lp55xx_run_engine(struct lp55xx_chip *chip, bool start) | |
| { | |
| if (chip->cfg->run_engine) | |
| chip->cfg->run_engine(chip, start); | |
| } | |
| static ssize_t lp55xx_store_engine_run(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t len) | |
| { | |
| struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | |
| struct lp55xx_chip *chip = led->chip; | |
| unsigned long val; | |
| if (kstrtoul(buf, 0, &val)) | |
| return -EINVAL; | |
| /* run or stop the selected engine */ | |
| if (val <= 0) { | |
| lp55xx_run_engine(chip, false); | |
| return len; | |
| } | |
| mutex_lock(&chip->lock); | |
| lp55xx_run_engine(chip, true); | |
| mutex_unlock(&chip->lock); | |
| return len; | |
| } | |
| static DEVICE_ATTR(select_engine, S_IRUGO | S_IWUSR, | |
| lp55xx_show_engine_select, lp55xx_store_engine_select); | |
| static DEVICE_ATTR(run_engine, S_IWUSR, NULL, lp55xx_store_engine_run); | |
| static struct attribute *lp55xx_engine_attributes[] = { | |
| &dev_attr_select_engine.attr, | |
| &dev_attr_run_engine.attr, | |
| NULL, | |
| }; | |
| static const struct attribute_group lp55xx_engine_attr_group = { | |
| .attrs = lp55xx_engine_attributes, | |
| }; | |
| int lp55xx_write(struct lp55xx_chip *chip, u8 reg, u8 val) | |
| { | |
| return i2c_smbus_write_byte_data(chip->cl, reg, val); | |
| } | |
| EXPORT_SYMBOL_GPL(lp55xx_write); | |
| int lp55xx_read(struct lp55xx_chip *chip, u8 reg, u8 *val) | |
| { | |
| s32 ret; | |
| ret = i2c_smbus_read_byte_data(chip->cl, reg); | |
| if (ret < 0) | |
| return ret; | |
| *val = ret; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(lp55xx_read); | |
| int lp55xx_update_bits(struct lp55xx_chip *chip, u8 reg, u8 mask, u8 val) | |
| { | |
| int ret; | |
| u8 tmp; | |
| ret = lp55xx_read(chip, reg, &tmp); | |
| if (ret) | |
| return ret; | |
| tmp &= ~mask; | |
| tmp |= val & mask; | |
| return lp55xx_write(chip, reg, tmp); | |
| } | |
| EXPORT_SYMBOL_GPL(lp55xx_update_bits); | |
| bool lp55xx_is_extclk_used(struct lp55xx_chip *chip) | |
| { | |
| struct clk *clk; | |
| int err; | |
| clk = devm_clk_get(&chip->cl->dev, "32k_clk"); | |
| if (IS_ERR(clk)) | |
| goto use_internal_clk; | |
| err = clk_prepare_enable(clk); | |
| if (err) | |
| goto use_internal_clk; | |
| if (clk_get_rate(clk) != LP55XX_CLK_32K) { | |
| clk_disable_unprepare(clk); | |
| goto use_internal_clk; | |
| } | |
| dev_info(&chip->cl->dev, "%dHz external clock used\n", LP55XX_CLK_32K); | |
| chip->clk = clk; | |
| return true; | |
| use_internal_clk: | |
| dev_info(&chip->cl->dev, "internal clock used\n"); | |
| return false; | |
| } | |
| EXPORT_SYMBOL_GPL(lp55xx_is_extclk_used); | |
| int lp55xx_init_device(struct lp55xx_chip *chip) | |
| { | |
| struct lp55xx_platform_data *pdata; | |
| struct lp55xx_device_config *cfg; | |
| struct device *dev = &chip->cl->dev; | |
| int ret = 0; | |
| WARN_ON(!chip); | |
| pdata = chip->pdata; | |
| cfg = chip->cfg; | |
| if (!pdata || !cfg) | |
| return -EINVAL; | |
| if (gpio_is_valid(pdata->enable_gpio)) { | |
| ret = devm_gpio_request_one(dev, pdata->enable_gpio, | |
| GPIOF_DIR_OUT, "lp5523_enable"); | |
| if (ret < 0) { | |
| dev_err(dev, "could not acquire enable gpio (err=%d)\n", | |
| ret); | |
| goto err; | |
| } | |
| gpio_set_value(pdata->enable_gpio, 0); | |
| usleep_range(1000, 2000); /* Keep enable down at least 1ms */ | |
| gpio_set_value(pdata->enable_gpio, 1); | |
| usleep_range(1000, 2000); /* 500us abs min. */ | |
| } | |
| lp55xx_reset_device(chip); | |
| /* | |
| * Exact value is not available. 10 - 20ms | |
| * appears to be enough for reset. | |
| */ | |
| usleep_range(10000, 20000); | |
| ret = lp55xx_detect_device(chip); | |
| if (ret) { | |
| dev_err(dev, "device detection err: %d\n", ret); | |
| goto err; | |
| } | |
| /* chip specific initialization */ | |
| ret = lp55xx_post_init_device(chip); | |
| if (ret) { | |
| dev_err(dev, "post init device err: %d\n", ret); | |
| goto err_post_init; | |
| } | |
| return 0; | |
| err_post_init: | |
| lp55xx_deinit_device(chip); | |
| err: | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(lp55xx_init_device); | |
| void lp55xx_deinit_device(struct lp55xx_chip *chip) | |
| { | |
| struct lp55xx_platform_data *pdata = chip->pdata; | |
| if (chip->clk) | |
| clk_disable_unprepare(chip->clk); | |
| if (gpio_is_valid(pdata->enable_gpio)) | |
| gpio_set_value(pdata->enable_gpio, 0); | |
| } | |
| EXPORT_SYMBOL_GPL(lp55xx_deinit_device); | |
| int lp55xx_register_leds(struct lp55xx_led *led, struct lp55xx_chip *chip) | |
| { | |
| struct lp55xx_platform_data *pdata = chip->pdata; | |
| struct lp55xx_device_config *cfg = chip->cfg; | |
| int num_channels = pdata->num_channels; | |
| struct lp55xx_led *each; | |
| u8 led_current; | |
| int ret; | |
| int i; | |
| if (!cfg->brightness_fn) { | |
| dev_err(&chip->cl->dev, "empty brightness configuration\n"); | |
| return -EINVAL; | |
| } | |
| for (i = 0; i < num_channels; i++) { | |
| /* do not initialize channels that are not connected */ | |
| if (pdata->led_config[i].led_current == 0) | |
| continue; | |
| led_current = pdata->led_config[i].led_current; | |
| each = led + i; | |
| ret = lp55xx_init_led(each, chip, i); | |
| if (ret) | |
| goto err_init_led; | |
| chip->num_leds++; | |
| each->chip = chip; | |
| /* setting led current at each channel */ | |
| if (cfg->set_led_current) | |
| cfg->set_led_current(each, led_current); | |
| } | |
| return 0; | |
| err_init_led: | |
| lp55xx_unregister_leds(led, chip); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(lp55xx_register_leds); | |
| void lp55xx_unregister_leds(struct lp55xx_led *led, struct lp55xx_chip *chip) | |
| { | |
| int i; | |
| struct lp55xx_led *each; | |
| for (i = 0; i < chip->num_leds; i++) { | |
| each = led + i; | |
| led_classdev_unregister(&each->cdev); | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(lp55xx_unregister_leds); | |
| int lp55xx_register_sysfs(struct lp55xx_chip *chip) | |
| { | |
| struct device *dev = &chip->cl->dev; | |
| struct lp55xx_device_config *cfg = chip->cfg; | |
| int ret; | |
| if (!cfg->run_engine || !cfg->firmware_cb) | |
| goto dev_specific_attrs; | |
| ret = sysfs_create_group(&dev->kobj, &lp55xx_engine_attr_group); | |
| if (ret) | |
| return ret; | |
| dev_specific_attrs: | |
| return cfg->dev_attr_group ? | |
| sysfs_create_group(&dev->kobj, cfg->dev_attr_group) : 0; | |
| } | |
| EXPORT_SYMBOL_GPL(lp55xx_register_sysfs); | |
| void lp55xx_unregister_sysfs(struct lp55xx_chip *chip) | |
| { | |
| struct device *dev = &chip->cl->dev; | |
| struct lp55xx_device_config *cfg = chip->cfg; | |
| if (cfg->dev_attr_group) | |
| sysfs_remove_group(&dev->kobj, cfg->dev_attr_group); | |
| sysfs_remove_group(&dev->kobj, &lp55xx_engine_attr_group); | |
| } | |
| EXPORT_SYMBOL_GPL(lp55xx_unregister_sysfs); | |
| struct lp55xx_platform_data *lp55xx_of_populate_pdata(struct device *dev, | |
| struct device_node *np) | |
| { | |
| struct device_node *child; | |
| struct lp55xx_platform_data *pdata; | |
| struct lp55xx_led_config *cfg; | |
| int num_channels; | |
| int i = 0; | |
| pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); | |
| if (!pdata) | |
| return ERR_PTR(-ENOMEM); | |
| num_channels = of_get_child_count(np); | |
| if (num_channels == 0) { | |
| dev_err(dev, "no LED channels\n"); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| cfg = devm_kzalloc(dev, sizeof(*cfg) * num_channels, GFP_KERNEL); | |
| if (!cfg) | |
| return ERR_PTR(-ENOMEM); | |
| pdata->led_config = &cfg[0]; | |
| pdata->num_channels = num_channels; | |
| for_each_child_of_node(np, child) { | |
| cfg[i].chan_nr = i; | |
| of_property_read_string(child, "chan-name", &cfg[i].name); | |
| of_property_read_u8(child, "led-cur", &cfg[i].led_current); | |
| of_property_read_u8(child, "max-cur", &cfg[i].max_current); | |
| cfg[i].default_trigger = | |
| of_get_property(child, "linux,default-trigger", NULL); | |
| i++; | |
| } | |
| of_property_read_string(np, "label", &pdata->label); | |
| of_property_read_u8(np, "clock-mode", &pdata->clock_mode); | |
| pdata->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0); | |
| /* LP8501 specific */ | |
| of_property_read_u8(np, "pwr-sel", (u8 *)&pdata->pwr_sel); | |
| return pdata; | |
| } | |
| EXPORT_SYMBOL_GPL(lp55xx_of_populate_pdata); | |
| MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>"); | |
| MODULE_DESCRIPTION("LP55xx Common Driver"); | |
| MODULE_LICENSE("GPL"); |