| /* | |
| * Driver for the ADB controller in the Mac I/O (Hydra) chip. | |
| */ | |
| #include <stdarg.h> | |
| #include <linux/types.h> | |
| #include <linux/errno.h> | |
| #include <linux/kernel.h> | |
| #include <linux/delay.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/interrupt.h> | |
| #include <asm/prom.h> | |
| #include <linux/adb.h> | |
| #include <asm/io.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/hydra.h> | |
| #include <asm/irq.h> | |
| #include <linux/init.h> | |
| #include <linux/ioport.h> | |
| struct preg { | |
| unsigned char r; | |
| char pad[15]; | |
| }; | |
| struct adb_regs { | |
| struct preg intr; | |
| struct preg data[9]; | |
| struct preg intr_enb; | |
| struct preg dcount; | |
| struct preg error; | |
| struct preg ctrl; | |
| struct preg autopoll; | |
| struct preg active_hi; | |
| struct preg active_lo; | |
| struct preg test; | |
| }; | |
| /* Bits in intr and intr_enb registers */ | |
| #define DFB 1 /* data from bus */ | |
| #define TAG 2 /* transfer access grant */ | |
| /* Bits in dcount register */ | |
| #define HMB 0x0f /* how many bytes */ | |
| #define APD 0x10 /* auto-poll data */ | |
| /* Bits in error register */ | |
| #define NRE 1 /* no response error */ | |
| #define DLE 2 /* data lost error */ | |
| /* Bits in ctrl register */ | |
| #define TAR 1 /* transfer access request */ | |
| #define DTB 2 /* data to bus */ | |
| #define CRE 4 /* command response expected */ | |
| #define ADB_RST 8 /* ADB reset */ | |
| /* Bits in autopoll register */ | |
| #define APE 1 /* autopoll enable */ | |
| static volatile struct adb_regs __iomem *adb; | |
| static struct adb_request *current_req, *last_req; | |
| static DEFINE_SPINLOCK(macio_lock); | |
| static int macio_probe(void); | |
| static int macio_init(void); | |
| static irqreturn_t macio_adb_interrupt(int irq, void *arg); | |
| static int macio_send_request(struct adb_request *req, int sync); | |
| static int macio_adb_autopoll(int devs); | |
| static void macio_adb_poll(void); | |
| static int macio_adb_reset_bus(void); | |
| struct adb_driver macio_adb_driver = { | |
| "MACIO", | |
| macio_probe, | |
| macio_init, | |
| macio_send_request, | |
| /*macio_write,*/ | |
| macio_adb_autopoll, | |
| macio_adb_poll, | |
| macio_adb_reset_bus | |
| }; | |
| int macio_probe(void) | |
| { | |
| struct device_node *np; | |
| np = of_find_compatible_node(NULL, "adb", "chrp,adb0"); | |
| if (np) { | |
| of_node_put(np); | |
| return 0; | |
| } | |
| return -ENODEV; | |
| } | |
| int macio_init(void) | |
| { | |
| struct device_node *adbs; | |
| struct resource r; | |
| unsigned int irq; | |
| adbs = of_find_compatible_node(NULL, "adb", "chrp,adb0"); | |
| if (adbs == 0) | |
| return -ENXIO; | |
| if (of_address_to_resource(adbs, 0, &r)) { | |
| of_node_put(adbs); | |
| return -ENXIO; | |
| } | |
| adb = ioremap(r.start, sizeof(struct adb_regs)); | |
| out_8(&adb->ctrl.r, 0); | |
| out_8(&adb->intr.r, 0); | |
| out_8(&adb->error.r, 0); | |
| out_8(&adb->active_hi.r, 0xff); /* for now, set all devices active */ | |
| out_8(&adb->active_lo.r, 0xff); | |
| out_8(&adb->autopoll.r, APE); | |
| irq = irq_of_parse_and_map(adbs, 0); | |
| of_node_put(adbs); | |
| if (request_irq(irq, macio_adb_interrupt, 0, "ADB", (void *)0)) { | |
| printk(KERN_ERR "ADB: can't get irq %d\n", irq); | |
| return -EAGAIN; | |
| } | |
| out_8(&adb->intr_enb.r, DFB | TAG); | |
| printk("adb: mac-io driver 1.0 for unified ADB\n"); | |
| return 0; | |
| } | |
| static int macio_adb_autopoll(int devs) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&macio_lock, flags); | |
| out_8(&adb->active_hi.r, devs >> 8); | |
| out_8(&adb->active_lo.r, devs); | |
| out_8(&adb->autopoll.r, devs? APE: 0); | |
| spin_unlock_irqrestore(&macio_lock, flags); | |
| return 0; | |
| } | |
| static int macio_adb_reset_bus(void) | |
| { | |
| unsigned long flags; | |
| int timeout = 1000000; | |
| /* Hrm... we may want to not lock interrupts for so | |
| * long ... oh well, who uses that chip anyway ? :) | |
| * That function will be seldom used during boot | |
| * on rare machines, so... | |
| */ | |
| spin_lock_irqsave(&macio_lock, flags); | |
| out_8(&adb->ctrl.r, in_8(&adb->ctrl.r) | ADB_RST); | |
| while ((in_8(&adb->ctrl.r) & ADB_RST) != 0) { | |
| if (--timeout == 0) { | |
| out_8(&adb->ctrl.r, in_8(&adb->ctrl.r) & ~ADB_RST); | |
| spin_unlock_irqrestore(&macio_lock, flags); | |
| return -1; | |
| } | |
| } | |
| spin_unlock_irqrestore(&macio_lock, flags); | |
| return 0; | |
| } | |
| /* Send an ADB command */ | |
| static int macio_send_request(struct adb_request *req, int sync) | |
| { | |
| unsigned long flags; | |
| int i; | |
| if (req->data[0] != ADB_PACKET) | |
| return -EINVAL; | |
| for (i = 0; i < req->nbytes - 1; ++i) | |
| req->data[i] = req->data[i+1]; | |
| --req->nbytes; | |
| req->next = NULL; | |
| req->sent = 0; | |
| req->complete = 0; | |
| req->reply_len = 0; | |
| spin_lock_irqsave(&macio_lock, flags); | |
| if (current_req != 0) { | |
| last_req->next = req; | |
| last_req = req; | |
| } else { | |
| current_req = last_req = req; | |
| out_8(&adb->ctrl.r, in_8(&adb->ctrl.r) | TAR); | |
| } | |
| spin_unlock_irqrestore(&macio_lock, flags); | |
| if (sync) { | |
| while (!req->complete) | |
| macio_adb_poll(); | |
| } | |
| return 0; | |
| } | |
| static irqreturn_t macio_adb_interrupt(int irq, void *arg) | |
| { | |
| int i, n, err; | |
| struct adb_request *req = NULL; | |
| unsigned char ibuf[16]; | |
| int ibuf_len = 0; | |
| int complete = 0; | |
| int autopoll = 0; | |
| int handled = 0; | |
| spin_lock(&macio_lock); | |
| if (in_8(&adb->intr.r) & TAG) { | |
| handled = 1; | |
| if ((req = current_req) != 0) { | |
| /* put the current request in */ | |
| for (i = 0; i < req->nbytes; ++i) | |
| out_8(&adb->data[i].r, req->data[i]); | |
| out_8(&adb->dcount.r, req->nbytes & HMB); | |
| req->sent = 1; | |
| if (req->reply_expected) { | |
| out_8(&adb->ctrl.r, DTB + CRE); | |
| } else { | |
| out_8(&adb->ctrl.r, DTB); | |
| current_req = req->next; | |
| complete = 1; | |
| if (current_req) | |
| out_8(&adb->ctrl.r, in_8(&adb->ctrl.r) | TAR); | |
| } | |
| } | |
| out_8(&adb->intr.r, 0); | |
| } | |
| if (in_8(&adb->intr.r) & DFB) { | |
| handled = 1; | |
| err = in_8(&adb->error.r); | |
| if (current_req && current_req->sent) { | |
| /* this is the response to a command */ | |
| req = current_req; | |
| if (err == 0) { | |
| req->reply_len = in_8(&adb->dcount.r) & HMB; | |
| for (i = 0; i < req->reply_len; ++i) | |
| req->reply[i] = in_8(&adb->data[i].r); | |
| } | |
| current_req = req->next; | |
| complete = 1; | |
| if (current_req) | |
| out_8(&adb->ctrl.r, in_8(&adb->ctrl.r) | TAR); | |
| } else if (err == 0) { | |
| /* autopoll data */ | |
| n = in_8(&adb->dcount.r) & HMB; | |
| for (i = 0; i < n; ++i) | |
| ibuf[i] = in_8(&adb->data[i].r); | |
| ibuf_len = n; | |
| autopoll = (in_8(&adb->dcount.r) & APD) != 0; | |
| } | |
| out_8(&adb->error.r, 0); | |
| out_8(&adb->intr.r, 0); | |
| } | |
| spin_unlock(&macio_lock); | |
| if (complete && req) { | |
| void (*done)(struct adb_request *) = req->done; | |
| mb(); | |
| req->complete = 1; | |
| /* Here, we assume that if the request has a done member, the | |
| * struct request will survive to setting req->complete to 1 | |
| */ | |
| if (done) | |
| (*done)(req); | |
| } | |
| if (ibuf_len) | |
| adb_input(ibuf, ibuf_len, autopoll); | |
| return IRQ_RETVAL(handled); | |
| } | |
| static void macio_adb_poll(void) | |
| { | |
| unsigned long flags; | |
| local_irq_save(flags); | |
| if (in_8(&adb->intr.r) != 0) | |
| macio_adb_interrupt(0, NULL); | |
| local_irq_restore(flags); | |
| } |