| /* | |
| * Driver for Conexant CX24113/CX24128 Tuner (Satellite) | |
| * | |
| * Copyright (C) 2007-8 Patrick Boettcher <pb@linuxtv.org> | |
| * | |
| * Developed for BBTI / Technisat | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #include <linux/slab.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include "dvb_frontend.h" | |
| #include "cx24113.h" | |
| static int debug; | |
| #define cx_info(args...) do { printk(KERN_INFO "CX24113: " args); } while (0) | |
| #define cx_err(args...) do { printk(KERN_ERR "CX24113: " args); } while (0) | |
| #define dprintk(args...) \ | |
| do { \ | |
| if (debug) { \ | |
| printk(KERN_DEBUG "CX24113: %s: ", __func__); \ | |
| printk(args); \ | |
| } \ | |
| } while (0) | |
| struct cx24113_state { | |
| struct i2c_adapter *i2c; | |
| const struct cx24113_config *config; | |
| #define REV_CX24113 0x23 | |
| u8 rev; | |
| u8 ver; | |
| u8 icp_mode:1; | |
| #define ICP_LEVEL1 0 | |
| #define ICP_LEVEL2 1 | |
| #define ICP_LEVEL3 2 | |
| #define ICP_LEVEL4 3 | |
| u8 icp_man:2; | |
| u8 icp_auto_low:2; | |
| u8 icp_auto_mlow:2; | |
| u8 icp_auto_mhi:2; | |
| u8 icp_auto_hi:2; | |
| u8 icp_dig; | |
| #define LNA_MIN_GAIN 0 | |
| #define LNA_MID_GAIN 1 | |
| #define LNA_MAX_GAIN 2 | |
| u8 lna_gain:2; | |
| u8 acp_on:1; | |
| u8 vco_mode:2; | |
| u8 vco_shift:1; | |
| #define VCOBANDSEL_6 0x80 | |
| #define VCOBANDSEL_5 0x01 | |
| #define VCOBANDSEL_4 0x02 | |
| #define VCOBANDSEL_3 0x04 | |
| #define VCOBANDSEL_2 0x08 | |
| #define VCOBANDSEL_1 0x10 | |
| u8 vco_band; | |
| #define VCODIV4 4 | |
| #define VCODIV2 2 | |
| u8 vcodiv; | |
| u8 bs_delay:4; | |
| u16 bs_freqcnt:13; | |
| u16 bs_rdiv; | |
| u8 prescaler_mode:1; | |
| u8 rfvga_bias_ctrl; | |
| s16 tuner_gain_thres; | |
| u8 gain_level; | |
| u32 frequency; | |
| u8 refdiv; | |
| u8 Fwindow_enabled; | |
| }; | |
| static int cx24113_writereg(struct cx24113_state *state, int reg, int data) | |
| { | |
| u8 buf[] = { reg, data }; | |
| struct i2c_msg msg = { .addr = state->config->i2c_addr, | |
| .flags = 0, .buf = buf, .len = 2 }; | |
| int err = i2c_transfer(state->i2c, &msg, 1); | |
| if (err != 1) { | |
| printk(KERN_DEBUG "%s: writereg error(err == %i, reg == 0x%02x," | |
| " data == 0x%02x)\n", __func__, err, reg, data); | |
| return err; | |
| } | |
| return 0; | |
| } | |
| static int cx24113_readreg(struct cx24113_state *state, u8 reg) | |
| { | |
| int ret; | |
| u8 b; | |
| struct i2c_msg msg[] = { | |
| { .addr = state->config->i2c_addr, | |
| .flags = 0, .buf = ®, .len = 1 }, | |
| { .addr = state->config->i2c_addr, | |
| .flags = I2C_M_RD, .buf = &b, .len = 1 } | |
| }; | |
| ret = i2c_transfer(state->i2c, msg, 2); | |
| if (ret != 2) { | |
| printk(KERN_DEBUG "%s: reg=0x%x (error=%d)\n", | |
| __func__, reg, ret); | |
| return ret; | |
| } | |
| return b; | |
| } | |
| static void cx24113_set_parameters(struct cx24113_state *state) | |
| { | |
| u8 r; | |
| r = cx24113_readreg(state, 0x10) & 0x82; | |
| r |= state->icp_mode; | |
| r |= state->icp_man << 4; | |
| r |= state->icp_dig << 2; | |
| r |= state->prescaler_mode << 5; | |
| cx24113_writereg(state, 0x10, r); | |
| r = (state->icp_auto_low << 0) | (state->icp_auto_mlow << 2) | |
| | (state->icp_auto_mhi << 4) | (state->icp_auto_hi << 6); | |
| cx24113_writereg(state, 0x11, r); | |
| if (state->rev == REV_CX24113) { | |
| r = cx24113_readreg(state, 0x20) & 0xec; | |
| r |= state->lna_gain; | |
| r |= state->rfvga_bias_ctrl << 4; | |
| cx24113_writereg(state, 0x20, r); | |
| } | |
| r = cx24113_readreg(state, 0x12) & 0x03; | |
| r |= state->acp_on << 2; | |
| r |= state->bs_delay << 4; | |
| cx24113_writereg(state, 0x12, r); | |
| r = cx24113_readreg(state, 0x18) & 0x40; | |
| r |= state->vco_shift; | |
| if (state->vco_band == VCOBANDSEL_6) | |
| r |= (1 << 7); | |
| else | |
| r |= (state->vco_band << 1); | |
| cx24113_writereg(state, 0x18, r); | |
| r = cx24113_readreg(state, 0x14) & 0x20; | |
| r |= (state->vco_mode << 6) | ((state->bs_freqcnt >> 8) & 0x1f); | |
| cx24113_writereg(state, 0x14, r); | |
| cx24113_writereg(state, 0x15, (state->bs_freqcnt & 0xff)); | |
| cx24113_writereg(state, 0x16, (state->bs_rdiv >> 4) & 0xff); | |
| r = (cx24113_readreg(state, 0x17) & 0x0f) | | |
| ((state->bs_rdiv & 0x0f) << 4); | |
| cx24113_writereg(state, 0x17, r); | |
| } | |
| #define VGA_0 0x00 | |
| #define VGA_1 0x04 | |
| #define VGA_2 0x02 | |
| #define VGA_3 0x06 | |
| #define VGA_4 0x01 | |
| #define VGA_5 0x05 | |
| #define VGA_6 0x03 | |
| #define VGA_7 0x07 | |
| #define RFVGA_0 0x00 | |
| #define RFVGA_1 0x01 | |
| #define RFVGA_2 0x02 | |
| #define RFVGA_3 0x03 | |
| static int cx24113_set_gain_settings(struct cx24113_state *state, | |
| s16 power_estimation) | |
| { | |
| u8 ampout = cx24113_readreg(state, 0x1d) & 0xf0, | |
| vga = cx24113_readreg(state, 0x1f) & 0x3f, | |
| rfvga = cx24113_readreg(state, 0x20) & 0xf3; | |
| u8 gain_level = power_estimation >= state->tuner_gain_thres; | |
| dprintk("power estimation: %d, thres: %d, gain_level: %d/%d\n", | |
| power_estimation, state->tuner_gain_thres, | |
| state->gain_level, gain_level); | |
| if (gain_level == state->gain_level) | |
| return 0; /* nothing to be done */ | |
| ampout |= 0xf; | |
| if (gain_level) { | |
| rfvga |= RFVGA_0 << 2; | |
| vga |= (VGA_7 << 3) | VGA_7; | |
| } else { | |
| rfvga |= RFVGA_2 << 2; | |
| vga |= (VGA_6 << 3) | VGA_2; | |
| } | |
| state->gain_level = gain_level; | |
| cx24113_writereg(state, 0x1d, ampout); | |
| cx24113_writereg(state, 0x1f, vga); | |
| cx24113_writereg(state, 0x20, rfvga); | |
| return 1; /* did something */ | |
| } | |
| static int cx24113_set_Fref(struct cx24113_state *state, u8 high) | |
| { | |
| u8 xtal = cx24113_readreg(state, 0x02); | |
| if (state->rev == 0x43 && state->vcodiv == VCODIV4) | |
| high = 1; | |
| xtal &= ~0x2; | |
| if (high) | |
| xtal |= high << 1; | |
| return cx24113_writereg(state, 0x02, xtal); | |
| } | |
| static int cx24113_enable(struct cx24113_state *state, u8 enable) | |
| { | |
| u8 r21 = (cx24113_readreg(state, 0x21) & 0xc0) | enable; | |
| if (state->rev == REV_CX24113) | |
| r21 |= (1 << 1); | |
| return cx24113_writereg(state, 0x21, r21); | |
| } | |
| static int cx24113_set_bandwidth(struct cx24113_state *state, u32 bandwidth_khz) | |
| { | |
| u8 r; | |
| if (bandwidth_khz <= 19000) | |
| r = 0x03 << 6; | |
| else if (bandwidth_khz <= 25000) | |
| r = 0x02 << 6; | |
| else | |
| r = 0x01 << 6; | |
| dprintk("bandwidth to be set: %d\n", bandwidth_khz); | |
| bandwidth_khz *= 10; | |
| bandwidth_khz -= 10000; | |
| bandwidth_khz /= 1000; | |
| bandwidth_khz += 5; | |
| bandwidth_khz /= 10; | |
| dprintk("bandwidth: %d %d\n", r >> 6, bandwidth_khz); | |
| r |= bandwidth_khz & 0x3f; | |
| return cx24113_writereg(state, 0x1e, r); | |
| } | |
| static int cx24113_set_clk_inversion(struct cx24113_state *state, u8 on) | |
| { | |
| u8 r = (cx24113_readreg(state, 0x10) & 0x7f) | ((on & 0x1) << 7); | |
| return cx24113_writereg(state, 0x10, r); | |
| } | |
| static int cx24113_get_status(struct dvb_frontend *fe, u32 *status) | |
| { | |
| struct cx24113_state *state = fe->tuner_priv; | |
| u8 r = (cx24113_readreg(state, 0x10) & 0x02) >> 1; | |
| if (r) | |
| *status |= TUNER_STATUS_LOCKED; | |
| dprintk("PLL locked: %d\n", r); | |
| return 0; | |
| } | |
| static u8 cx24113_set_ref_div(struct cx24113_state *state, u8 refdiv) | |
| { | |
| if (state->rev == 0x43 && state->vcodiv == VCODIV4) | |
| refdiv = 2; | |
| return state->refdiv = refdiv; | |
| } | |
| static void cx24113_calc_pll_nf(struct cx24113_state *state, u16 *n, s32 *f) | |
| { | |
| s32 N; | |
| s64 F; | |
| u64 dividend; | |
| u8 R, r; | |
| u8 vcodiv; | |
| u8 factor; | |
| s32 freq_hz = state->frequency * 1000; | |
| if (state->config->xtal_khz < 20000) | |
| factor = 1; | |
| else | |
| factor = 2; | |
| if (state->rev == REV_CX24113) { | |
| if (state->frequency >= 1100000) | |
| vcodiv = VCODIV2; | |
| else | |
| vcodiv = VCODIV4; | |
| } else { | |
| if (state->frequency >= 1165000) | |
| vcodiv = VCODIV2; | |
| else | |
| vcodiv = VCODIV4; | |
| } | |
| state->vcodiv = vcodiv; | |
| dprintk("calculating N/F for %dHz with vcodiv %d\n", freq_hz, vcodiv); | |
| R = 0; | |
| do { | |
| R = cx24113_set_ref_div(state, R + 1); | |
| /* calculate tuner PLL settings: */ | |
| N = (freq_hz / 100 * vcodiv) * R; | |
| N /= (state->config->xtal_khz) * factor * 2; | |
| N += 5; /* For round up. */ | |
| N /= 10; | |
| N -= 32; | |
| } while (N < 6 && R < 3); | |
| if (N < 6) { | |
| cx_err("strange frequency: N < 6\n"); | |
| return; | |
| } | |
| F = freq_hz; | |
| F *= (u64) (R * vcodiv * 262144); | |
| dprintk("1 N: %d, F: %lld, R: %d\n", N, (long long)F, R); | |
| /* do_div needs an u64 as first argument */ | |
| dividend = F; | |
| do_div(dividend, state->config->xtal_khz * 1000 * factor * 2); | |
| F = dividend; | |
| dprintk("2 N: %d, F: %lld, R: %d\n", N, (long long)F, R); | |
| F -= (N + 32) * 262144; | |
| dprintk("3 N: %d, F: %lld, R: %d\n", N, (long long)F, R); | |
| if (state->Fwindow_enabled) { | |
| if (F > (262144 / 2 - 1638)) | |
| F = 262144 / 2 - 1638; | |
| if (F < (-262144 / 2 + 1638)) | |
| F = -262144 / 2 + 1638; | |
| if ((F < 3277 && F > 0) || (F > -3277 && F < 0)) { | |
| F = 0; | |
| r = cx24113_readreg(state, 0x10); | |
| cx24113_writereg(state, 0x10, r | (1 << 6)); | |
| } | |
| } | |
| dprintk("4 N: %d, F: %lld, R: %d\n", N, (long long)F, R); | |
| *n = (u16) N; | |
| *f = (s32) F; | |
| } | |
| static void cx24113_set_nfr(struct cx24113_state *state, u16 n, s32 f, u8 r) | |
| { | |
| u8 reg; | |
| cx24113_writereg(state, 0x19, (n >> 1) & 0xff); | |
| reg = ((n & 0x1) << 7) | ((f >> 11) & 0x7f); | |
| cx24113_writereg(state, 0x1a, reg); | |
| cx24113_writereg(state, 0x1b, (f >> 3) & 0xff); | |
| reg = cx24113_readreg(state, 0x1c) & 0x1f; | |
| cx24113_writereg(state, 0x1c, reg | ((f & 0x7) << 5)); | |
| cx24113_set_Fref(state, r - 1); | |
| } | |
| static int cx24113_set_frequency(struct cx24113_state *state, u32 frequency) | |
| { | |
| u8 r = 1; /* or 2 */ | |
| u16 n = 6; | |
| s32 f = 0; | |
| r = cx24113_readreg(state, 0x14); | |
| cx24113_writereg(state, 0x14, r & 0x3f); | |
| r = cx24113_readreg(state, 0x10); | |
| cx24113_writereg(state, 0x10, r & 0xbf); | |
| state->frequency = frequency; | |
| dprintk("tuning to frequency: %d\n", frequency); | |
| cx24113_calc_pll_nf(state, &n, &f); | |
| cx24113_set_nfr(state, n, f, state->refdiv); | |
| r = cx24113_readreg(state, 0x18) & 0xbf; | |
| if (state->vcodiv != VCODIV2) | |
| r |= 1 << 6; | |
| cx24113_writereg(state, 0x18, r); | |
| /* The need for this sleep is not clear. But helps in some cases */ | |
| msleep(5); | |
| r = cx24113_readreg(state, 0x1c) & 0xef; | |
| cx24113_writereg(state, 0x1c, r | (1 << 4)); | |
| return 0; | |
| } | |
| static int cx24113_init(struct dvb_frontend *fe) | |
| { | |
| struct cx24113_state *state = fe->tuner_priv; | |
| int ret; | |
| state->tuner_gain_thres = -50; | |
| state->gain_level = 255; /* to force a gain-setting initialization */ | |
| state->icp_mode = 0; | |
| if (state->config->xtal_khz < 11000) { | |
| state->icp_auto_hi = ICP_LEVEL4; | |
| state->icp_auto_mhi = ICP_LEVEL4; | |
| state->icp_auto_mlow = ICP_LEVEL3; | |
| state->icp_auto_low = ICP_LEVEL3; | |
| } else { | |
| state->icp_auto_hi = ICP_LEVEL4; | |
| state->icp_auto_mhi = ICP_LEVEL4; | |
| state->icp_auto_mlow = ICP_LEVEL3; | |
| state->icp_auto_low = ICP_LEVEL2; | |
| } | |
| state->icp_dig = ICP_LEVEL3; | |
| state->icp_man = ICP_LEVEL1; | |
| state->acp_on = 1; | |
| state->vco_mode = 0; | |
| state->vco_shift = 0; | |
| state->vco_band = VCOBANDSEL_1; | |
| state->bs_delay = 8; | |
| state->bs_freqcnt = 0x0fff; | |
| state->bs_rdiv = 0x0fff; | |
| state->prescaler_mode = 0; | |
| state->lna_gain = LNA_MAX_GAIN; | |
| state->rfvga_bias_ctrl = 1; | |
| state->Fwindow_enabled = 1; | |
| cx24113_set_Fref(state, 0); | |
| cx24113_enable(state, 0x3d); | |
| cx24113_set_parameters(state); | |
| cx24113_set_gain_settings(state, -30); | |
| cx24113_set_bandwidth(state, 18025); | |
| cx24113_set_clk_inversion(state, 1); | |
| if (state->config->xtal_khz >= 40000) | |
| ret = cx24113_writereg(state, 0x02, | |
| (cx24113_readreg(state, 0x02) & 0xfb) | (1 << 2)); | |
| else | |
| ret = cx24113_writereg(state, 0x02, | |
| (cx24113_readreg(state, 0x02) & 0xfb) | (0 << 2)); | |
| return ret; | |
| } | |
| static int cx24113_set_params(struct dvb_frontend *fe) | |
| { | |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; | |
| struct cx24113_state *state = fe->tuner_priv; | |
| /* for a ROLL-OFF factor of 0.35, 0.2: 600, 0.25: 625 */ | |
| u32 roll_off = 675; | |
| u32 bw; | |
| bw = ((c->symbol_rate/100) * roll_off) / 1000; | |
| bw += (10000000/100) + 5; | |
| bw /= 10; | |
| bw += 1000; | |
| cx24113_set_bandwidth(state, bw); | |
| cx24113_set_frequency(state, c->frequency); | |
| msleep(5); | |
| return cx24113_get_status(fe, &bw); | |
| } | |
| static s8 cx24113_agc_table[2][10] = { | |
| {-54, -41, -35, -30, -25, -21, -16, -10, -6, -2}, | |
| {-39, -35, -30, -25, -19, -15, -11, -5, 1, 9}, | |
| }; | |
| void cx24113_agc_callback(struct dvb_frontend *fe) | |
| { | |
| struct cx24113_state *state = fe->tuner_priv; | |
| s16 s, i; | |
| if (!fe->ops.read_signal_strength) | |
| return; | |
| do { | |
| /* this only works with the current CX24123 implementation */ | |
| fe->ops.read_signal_strength(fe, (u16 *) &s); | |
| s >>= 8; | |
| dprintk("signal strength: %d\n", s); | |
| for (i = 0; i < sizeof(cx24113_agc_table[0]); i++) | |
| if (cx24113_agc_table[state->gain_level][i] > s) | |
| break; | |
| s = -25 - i*5; | |
| } while (cx24113_set_gain_settings(state, s)); | |
| } | |
| EXPORT_SYMBOL(cx24113_agc_callback); | |
| static int cx24113_get_frequency(struct dvb_frontend *fe, u32 *frequency) | |
| { | |
| struct cx24113_state *state = fe->tuner_priv; | |
| *frequency = state->frequency; | |
| return 0; | |
| } | |
| static int cx24113_release(struct dvb_frontend *fe) | |
| { | |
| struct cx24113_state *state = fe->tuner_priv; | |
| dprintk("\n"); | |
| fe->tuner_priv = NULL; | |
| kfree(state); | |
| return 0; | |
| } | |
| static const struct dvb_tuner_ops cx24113_tuner_ops = { | |
| .info = { | |
| .name = "Conexant CX24113", | |
| .frequency_min = 950000, | |
| .frequency_max = 2150000, | |
| .frequency_step = 125, | |
| }, | |
| .release = cx24113_release, | |
| .init = cx24113_init, | |
| .set_params = cx24113_set_params, | |
| .get_frequency = cx24113_get_frequency, | |
| .get_status = cx24113_get_status, | |
| }; | |
| struct dvb_frontend *cx24113_attach(struct dvb_frontend *fe, | |
| const struct cx24113_config *config, struct i2c_adapter *i2c) | |
| { | |
| /* allocate memory for the internal state */ | |
| struct cx24113_state *state = | |
| kzalloc(sizeof(struct cx24113_state), GFP_KERNEL); | |
| int rc; | |
| if (state == NULL) { | |
| cx_err("Unable to kzalloc\n"); | |
| goto error; | |
| } | |
| /* setup the state */ | |
| state->config = config; | |
| state->i2c = i2c; | |
| cx_info("trying to detect myself\n"); | |
| /* making a dummy read, because of some expected troubles | |
| * after power on */ | |
| cx24113_readreg(state, 0x00); | |
| rc = cx24113_readreg(state, 0x00); | |
| if (rc < 0) { | |
| cx_info("CX24113 not found.\n"); | |
| goto error; | |
| } | |
| state->rev = rc; | |
| switch (rc) { | |
| case 0x43: | |
| cx_info("detected CX24113 variant\n"); | |
| break; | |
| case REV_CX24113: | |
| cx_info("successfully detected\n"); | |
| break; | |
| default: | |
| cx_err("unsupported device id: %x\n", state->rev); | |
| goto error; | |
| } | |
| state->ver = cx24113_readreg(state, 0x01); | |
| cx_info("version: %x\n", state->ver); | |
| /* create dvb_frontend */ | |
| memcpy(&fe->ops.tuner_ops, &cx24113_tuner_ops, | |
| sizeof(struct dvb_tuner_ops)); | |
| fe->tuner_priv = state; | |
| return fe; | |
| error: | |
| kfree(state); | |
| return NULL; | |
| } | |
| EXPORT_SYMBOL(cx24113_attach); | |
| module_param(debug, int, 0644); | |
| MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); | |
| MODULE_AUTHOR("Patrick Boettcher <pb@linuxtv.org>"); | |
| MODULE_DESCRIPTION("DVB Frontend module for Conexant CX24113/CX24128hardware"); | |
| MODULE_LICENSE("GPL"); | |