| /* | |
| * Sony CXD2820R demodulator driver | |
| * | |
| * Copyright (C) 2010 Antti Palosaari <crope@iki.fi> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License along | |
| * with this program; if not, write to the Free Software Foundation, Inc., | |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. | |
| */ | |
| #include "cxd2820r_priv.h" | |
| int cxd2820r_set_frontend_t(struct dvb_frontend *fe) | |
| { | |
| struct cxd2820r_priv *priv = fe->demodulator_priv; | |
| struct i2c_client *client = priv->client[0]; | |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; | |
| int ret, bw_i; | |
| unsigned int utmp; | |
| u32 if_frequency; | |
| u8 buf[3], bw_param; | |
| u8 bw_params1[][5] = { | |
| { 0x17, 0xea, 0xaa, 0xaa, 0xaa }, /* 6 MHz */ | |
| { 0x14, 0x80, 0x00, 0x00, 0x00 }, /* 7 MHz */ | |
| { 0x11, 0xf0, 0x00, 0x00, 0x00 }, /* 8 MHz */ | |
| }; | |
| u8 bw_params2[][2] = { | |
| { 0x1f, 0xdc }, /* 6 MHz */ | |
| { 0x12, 0xf8 }, /* 7 MHz */ | |
| { 0x01, 0xe0 }, /* 8 MHz */ | |
| }; | |
| struct reg_val_mask tab[] = { | |
| { 0x00080, 0x00, 0xff }, | |
| { 0x00081, 0x03, 0xff }, | |
| { 0x00085, 0x07, 0xff }, | |
| { 0x00088, 0x01, 0xff }, | |
| { 0x00070, priv->ts_mode, 0xff }, | |
| { 0x00071, !priv->ts_clk_inv << 4, 0x10 }, | |
| { 0x000cb, priv->if_agc_polarity << 6, 0x40 }, | |
| { 0x000a5, 0x00, 0x01 }, | |
| { 0x00082, 0x20, 0x60 }, | |
| { 0x000c2, 0xc3, 0xff }, | |
| { 0x0016a, 0x50, 0xff }, | |
| { 0x00427, 0x41, 0xff }, | |
| }; | |
| dev_dbg(&client->dev, | |
| "delivery_system=%d modulation=%d frequency=%u bandwidth_hz=%u inversion=%d\n", | |
| c->delivery_system, c->modulation, c->frequency, | |
| c->bandwidth_hz, c->inversion); | |
| switch (c->bandwidth_hz) { | |
| case 6000000: | |
| bw_i = 0; | |
| bw_param = 2; | |
| break; | |
| case 7000000: | |
| bw_i = 1; | |
| bw_param = 1; | |
| break; | |
| case 8000000: | |
| bw_i = 2; | |
| bw_param = 0; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| /* program tuner */ | |
| if (fe->ops.tuner_ops.set_params) | |
| fe->ops.tuner_ops.set_params(fe); | |
| if (priv->delivery_system != SYS_DVBT) { | |
| ret = cxd2820r_wr_reg_val_mask_tab(priv, tab, ARRAY_SIZE(tab)); | |
| if (ret) | |
| goto error; | |
| } | |
| priv->delivery_system = SYS_DVBT; | |
| priv->ber_running = false; /* tune stops BER counter */ | |
| /* program IF frequency */ | |
| if (fe->ops.tuner_ops.get_if_frequency) { | |
| ret = fe->ops.tuner_ops.get_if_frequency(fe, &if_frequency); | |
| if (ret) | |
| goto error; | |
| dev_dbg(&client->dev, "if_frequency=%u\n", if_frequency); | |
| } else { | |
| ret = -EINVAL; | |
| goto error; | |
| } | |
| utmp = DIV_ROUND_CLOSEST_ULL((u64)if_frequency * 0x1000000, CXD2820R_CLK); | |
| buf[0] = (utmp >> 16) & 0xff; | |
| buf[1] = (utmp >> 8) & 0xff; | |
| buf[2] = (utmp >> 0) & 0xff; | |
| ret = regmap_bulk_write(priv->regmap[0], 0x00b6, buf, 3); | |
| if (ret) | |
| goto error; | |
| ret = regmap_bulk_write(priv->regmap[0], 0x009f, bw_params1[bw_i], 5); | |
| if (ret) | |
| goto error; | |
| ret = regmap_update_bits(priv->regmap[0], 0x00d7, 0xc0, bw_param << 6); | |
| if (ret) | |
| goto error; | |
| ret = regmap_bulk_write(priv->regmap[0], 0x00d9, bw_params2[bw_i], 2); | |
| if (ret) | |
| goto error; | |
| ret = regmap_write(priv->regmap[0], 0x00ff, 0x08); | |
| if (ret) | |
| goto error; | |
| ret = regmap_write(priv->regmap[0], 0x00fe, 0x01); | |
| if (ret) | |
| goto error; | |
| return ret; | |
| error: | |
| dev_dbg(&client->dev, "failed=%d\n", ret); | |
| return ret; | |
| } | |
| int cxd2820r_get_frontend_t(struct dvb_frontend *fe, | |
| struct dtv_frontend_properties *c) | |
| { | |
| struct cxd2820r_priv *priv = fe->demodulator_priv; | |
| struct i2c_client *client = priv->client[0]; | |
| int ret; | |
| unsigned int utmp; | |
| u8 buf[2]; | |
| dev_dbg(&client->dev, "\n"); | |
| ret = regmap_bulk_read(priv->regmap[0], 0x002f, buf, sizeof(buf)); | |
| if (ret) | |
| goto error; | |
| switch ((buf[0] >> 6) & 0x03) { | |
| case 0: | |
| c->modulation = QPSK; | |
| break; | |
| case 1: | |
| c->modulation = QAM_16; | |
| break; | |
| case 2: | |
| c->modulation = QAM_64; | |
| break; | |
| } | |
| switch ((buf[1] >> 1) & 0x03) { | |
| case 0: | |
| c->transmission_mode = TRANSMISSION_MODE_2K; | |
| break; | |
| case 1: | |
| c->transmission_mode = TRANSMISSION_MODE_8K; | |
| break; | |
| } | |
| switch ((buf[1] >> 3) & 0x03) { | |
| case 0: | |
| c->guard_interval = GUARD_INTERVAL_1_32; | |
| break; | |
| case 1: | |
| c->guard_interval = GUARD_INTERVAL_1_16; | |
| break; | |
| case 2: | |
| c->guard_interval = GUARD_INTERVAL_1_8; | |
| break; | |
| case 3: | |
| c->guard_interval = GUARD_INTERVAL_1_4; | |
| break; | |
| } | |
| switch ((buf[0] >> 3) & 0x07) { | |
| case 0: | |
| c->hierarchy = HIERARCHY_NONE; | |
| break; | |
| case 1: | |
| c->hierarchy = HIERARCHY_1; | |
| break; | |
| case 2: | |
| c->hierarchy = HIERARCHY_2; | |
| break; | |
| case 3: | |
| c->hierarchy = HIERARCHY_4; | |
| break; | |
| } | |
| switch ((buf[0] >> 0) & 0x07) { | |
| case 0: | |
| c->code_rate_HP = FEC_1_2; | |
| break; | |
| case 1: | |
| c->code_rate_HP = FEC_2_3; | |
| break; | |
| case 2: | |
| c->code_rate_HP = FEC_3_4; | |
| break; | |
| case 3: | |
| c->code_rate_HP = FEC_5_6; | |
| break; | |
| case 4: | |
| c->code_rate_HP = FEC_7_8; | |
| break; | |
| } | |
| switch ((buf[1] >> 5) & 0x07) { | |
| case 0: | |
| c->code_rate_LP = FEC_1_2; | |
| break; | |
| case 1: | |
| c->code_rate_LP = FEC_2_3; | |
| break; | |
| case 2: | |
| c->code_rate_LP = FEC_3_4; | |
| break; | |
| case 3: | |
| c->code_rate_LP = FEC_5_6; | |
| break; | |
| case 4: | |
| c->code_rate_LP = FEC_7_8; | |
| break; | |
| } | |
| ret = regmap_read(priv->regmap[0], 0x07c6, &utmp); | |
| if (ret) | |
| goto error; | |
| switch ((utmp >> 0) & 0x01) { | |
| case 0: | |
| c->inversion = INVERSION_OFF; | |
| break; | |
| case 1: | |
| c->inversion = INVERSION_ON; | |
| break; | |
| } | |
| return ret; | |
| error: | |
| dev_dbg(&client->dev, "failed=%d\n", ret); | |
| return ret; | |
| } | |
| int cxd2820r_read_status_t(struct dvb_frontend *fe, enum fe_status *status) | |
| { | |
| struct cxd2820r_priv *priv = fe->demodulator_priv; | |
| struct i2c_client *client = priv->client[0]; | |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; | |
| int ret; | |
| unsigned int utmp, utmp1, utmp2; | |
| u8 buf[3]; | |
| /* Lock detection */ | |
| ret = regmap_bulk_read(priv->regmap[0], 0x0010, &buf[0], 1); | |
| if (ret) | |
| goto error; | |
| ret = regmap_bulk_read(priv->regmap[0], 0x0073, &buf[1], 1); | |
| if (ret) | |
| goto error; | |
| utmp1 = (buf[0] >> 0) & 0x07; | |
| utmp2 = (buf[1] >> 3) & 0x01; | |
| if (utmp1 == 6 && utmp2 == 1) { | |
| *status = FE_HAS_SIGNAL | FE_HAS_CARRIER | | |
| FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; | |
| } else if (utmp1 == 6 || utmp2 == 1) { | |
| *status = FE_HAS_SIGNAL | FE_HAS_CARRIER | | |
| FE_HAS_VITERBI | FE_HAS_SYNC; | |
| } else { | |
| *status = 0; | |
| } | |
| dev_dbg(&client->dev, "status=%02x raw=%*ph sync=%u ts=%u\n", | |
| *status, 2, buf, utmp1, utmp2); | |
| /* Signal strength */ | |
| if (*status & FE_HAS_SIGNAL) { | |
| unsigned int strength; | |
| ret = regmap_bulk_read(priv->regmap[0], 0x0026, buf, 2); | |
| if (ret) | |
| goto error; | |
| utmp = buf[0] << 8 | buf[1] << 0; | |
| utmp = ~utmp & 0x0fff; | |
| /* Scale value to 0x0000-0xffff */ | |
| strength = utmp << 4 | utmp >> 8; | |
| c->strength.len = 1; | |
| c->strength.stat[0].scale = FE_SCALE_RELATIVE; | |
| c->strength.stat[0].uvalue = strength; | |
| } else { | |
| c->strength.len = 1; | |
| c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| } | |
| /* CNR */ | |
| if (*status & FE_HAS_VITERBI) { | |
| unsigned int cnr; | |
| ret = regmap_bulk_read(priv->regmap[0], 0x002c, buf, 2); | |
| if (ret) | |
| goto error; | |
| utmp = buf[0] << 8 | buf[1] << 0; | |
| if (utmp) | |
| cnr = div_u64((u64)(intlog10(utmp) | |
| - intlog10(32000 - utmp) + 55532585) | |
| * 10000, (1 << 24)); | |
| else | |
| cnr = 0; | |
| c->cnr.len = 1; | |
| c->cnr.stat[0].scale = FE_SCALE_DECIBEL; | |
| c->cnr.stat[0].svalue = cnr; | |
| } else { | |
| c->cnr.len = 1; | |
| c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| } | |
| /* BER */ | |
| if (*status & FE_HAS_SYNC) { | |
| unsigned int post_bit_error; | |
| bool start_ber; | |
| if (priv->ber_running) { | |
| ret = regmap_bulk_read(priv->regmap[0], 0x0076, buf, 3); | |
| if (ret) | |
| goto error; | |
| if ((buf[2] >> 7) & 0x01) { | |
| post_bit_error = buf[2] << 16 | buf[1] << 8 | | |
| buf[0] << 0; | |
| post_bit_error &= 0x0fffff; | |
| start_ber = true; | |
| } else { | |
| post_bit_error = 0; | |
| start_ber = false; | |
| } | |
| } else { | |
| post_bit_error = 0; | |
| start_ber = true; | |
| } | |
| if (start_ber) { | |
| ret = regmap_write(priv->regmap[0], 0x0079, 0x01); | |
| if (ret) | |
| goto error; | |
| priv->ber_running = true; | |
| } | |
| priv->post_bit_error += post_bit_error; | |
| c->post_bit_error.len = 1; | |
| c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER; | |
| c->post_bit_error.stat[0].uvalue = priv->post_bit_error; | |
| } else { | |
| c->post_bit_error.len = 1; | |
| c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| } | |
| return ret; | |
| error: | |
| dev_dbg(&client->dev, "failed=%d\n", ret); | |
| return ret; | |
| } | |
| int cxd2820r_init_t(struct dvb_frontend *fe) | |
| { | |
| struct cxd2820r_priv *priv = fe->demodulator_priv; | |
| struct i2c_client *client = priv->client[0]; | |
| int ret; | |
| dev_dbg(&client->dev, "\n"); | |
| ret = regmap_write(priv->regmap[0], 0x0085, 0x07); | |
| if (ret) | |
| goto error; | |
| return ret; | |
| error: | |
| dev_dbg(&client->dev, "failed=%d\n", ret); | |
| return ret; | |
| } | |
| int cxd2820r_sleep_t(struct dvb_frontend *fe) | |
| { | |
| struct cxd2820r_priv *priv = fe->demodulator_priv; | |
| struct i2c_client *client = priv->client[0]; | |
| int ret; | |
| struct reg_val_mask tab[] = { | |
| { 0x000ff, 0x1f, 0xff }, | |
| { 0x00085, 0x00, 0xff }, | |
| { 0x00088, 0x01, 0xff }, | |
| { 0x00081, 0x00, 0xff }, | |
| { 0x00080, 0x00, 0xff }, | |
| }; | |
| dev_dbg(&client->dev, "\n"); | |
| priv->delivery_system = SYS_UNDEFINED; | |
| ret = cxd2820r_wr_reg_val_mask_tab(priv, tab, ARRAY_SIZE(tab)); | |
| if (ret) | |
| goto error; | |
| return ret; | |
| error: | |
| dev_dbg(&client->dev, "failed=%d\n", ret); | |
| return ret; | |
| } | |
| int cxd2820r_get_tune_settings_t(struct dvb_frontend *fe, | |
| struct dvb_frontend_tune_settings *s) | |
| { | |
| s->min_delay_ms = 500; | |
| s->step_size = fe->ops.info.frequency_stepsize * 2; | |
| s->max_drift = (fe->ops.info.frequency_stepsize * 2) + 1; | |
| return 0; | |
| } |