| /* | |
| bttv - Bt848 frame grabber driver | |
| Copyright (C) 1996,97,98 Ralph Metzler <rjkm@thp.uni-koeln.de> | |
| & Marcus Metzler <mocm@thp.uni-koeln.de> | |
| (c) 1999-2002 Gerd Knorr <kraxel@bytesex.org> | |
| some v4l2 code lines are taken from Justin's bttv2 driver which is | |
| (c) 2000 Justin Schoeman <justin@suntiger.ee.up.ac.za> | |
| V4L1 removal from: | |
| (c) 2005-2006 Nickolay V. Shmyrev <nshmyrev@yandex.ru> | |
| Fixes to be fully V4L2 compliant by | |
| (c) 2006 Mauro Carvalho Chehab <mchehab@infradead.org> | |
| Cropping and overscan support | |
| Copyright (C) 2005, 2006 Michael H. Schimek <mschimek@gmx.at> | |
| Sponsored by OPQ Systems AB | |
| This program is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 2 of the License, or | |
| (at your option) any later version. | |
| This program is distributed in the hope that it will be useful, | |
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| GNU General Public License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with this program; if not, write to the Free Software | |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include <linux/delay.h> | |
| #include <linux/slab.h> | |
| #include <linux/errno.h> | |
| #include <linux/fs.h> | |
| #include <linux/kernel.h> | |
| #include <linux/sched.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/kdev_t.h> | |
| #include "bttvp.h" | |
| #include <media/v4l2-common.h> | |
| #include <media/v4l2-ioctl.h> | |
| #include <media/v4l2-event.h> | |
| #include <media/i2c/tvaudio.h> | |
| #include <media/drv-intf/msp3400.h> | |
| #include <linux/dma-mapping.h> | |
| #include <asm/io.h> | |
| #include <asm/byteorder.h> | |
| #include <media/i2c/saa6588.h> | |
| #define BTTV_VERSION "0.9.19" | |
| unsigned int bttv_num; /* number of Bt848s in use */ | |
| struct bttv *bttvs[BTTV_MAX]; | |
| unsigned int bttv_debug; | |
| unsigned int bttv_verbose = 1; | |
| unsigned int bttv_gpio; | |
| /* config variables */ | |
| #ifdef __BIG_ENDIAN | |
| static unsigned int bigendian=1; | |
| #else | |
| static unsigned int bigendian; | |
| #endif | |
| static unsigned int radio[BTTV_MAX]; | |
| static unsigned int irq_debug; | |
| static unsigned int gbuffers = 8; | |
| static unsigned int gbufsize = 0x208000; | |
| static unsigned int reset_crop = 1; | |
| static int video_nr[BTTV_MAX] = { [0 ... (BTTV_MAX-1)] = -1 }; | |
| static int radio_nr[BTTV_MAX] = { [0 ... (BTTV_MAX-1)] = -1 }; | |
| static int vbi_nr[BTTV_MAX] = { [0 ... (BTTV_MAX-1)] = -1 }; | |
| static int debug_latency; | |
| static int disable_ir; | |
| static unsigned int fdsr; | |
| /* options */ | |
| static unsigned int combfilter; | |
| static unsigned int lumafilter; | |
| static unsigned int automute = 1; | |
| static unsigned int chroma_agc; | |
| static unsigned int agc_crush = 1; | |
| static unsigned int whitecrush_upper = 0xCF; | |
| static unsigned int whitecrush_lower = 0x7F; | |
| static unsigned int vcr_hack; | |
| static unsigned int irq_iswitch; | |
| static unsigned int uv_ratio = 50; | |
| static unsigned int full_luma_range; | |
| static unsigned int coring; | |
| /* API features (turn on/off stuff for testing) */ | |
| static unsigned int v4l2 = 1; | |
| /* insmod args */ | |
| module_param(bttv_verbose, int, 0644); | |
| module_param(bttv_gpio, int, 0644); | |
| module_param(bttv_debug, int, 0644); | |
| module_param(irq_debug, int, 0644); | |
| module_param(debug_latency, int, 0644); | |
| module_param(disable_ir, int, 0444); | |
| module_param(fdsr, int, 0444); | |
| module_param(gbuffers, int, 0444); | |
| module_param(gbufsize, int, 0444); | |
| module_param(reset_crop, int, 0444); | |
| module_param(v4l2, int, 0644); | |
| module_param(bigendian, int, 0644); | |
| module_param(irq_iswitch, int, 0644); | |
| module_param(combfilter, int, 0444); | |
| module_param(lumafilter, int, 0444); | |
| module_param(automute, int, 0444); | |
| module_param(chroma_agc, int, 0444); | |
| module_param(agc_crush, int, 0444); | |
| module_param(whitecrush_upper, int, 0444); | |
| module_param(whitecrush_lower, int, 0444); | |
| module_param(vcr_hack, int, 0444); | |
| module_param(uv_ratio, int, 0444); | |
| module_param(full_luma_range, int, 0444); | |
| module_param(coring, int, 0444); | |
| module_param_array(radio, int, NULL, 0444); | |
| module_param_array(video_nr, int, NULL, 0444); | |
| module_param_array(radio_nr, int, NULL, 0444); | |
| module_param_array(vbi_nr, int, NULL, 0444); | |
| MODULE_PARM_DESC(radio, "The TV card supports radio, default is 0 (no)"); | |
| MODULE_PARM_DESC(bigendian, "byte order of the framebuffer, default is native endian"); | |
| MODULE_PARM_DESC(bttv_verbose, "verbose startup messages, default is 1 (yes)"); | |
| MODULE_PARM_DESC(bttv_gpio, "log gpio changes, default is 0 (no)"); | |
| MODULE_PARM_DESC(bttv_debug, "debug messages, default is 0 (no)"); | |
| MODULE_PARM_DESC(irq_debug, "irq handler debug messages, default is 0 (no)"); | |
| MODULE_PARM_DESC(disable_ir, "disable infrared remote support"); | |
| MODULE_PARM_DESC(gbuffers, "number of capture buffers. range 2-32, default 8"); | |
| MODULE_PARM_DESC(gbufsize, "size of the capture buffers, default is 0x208000"); | |
| MODULE_PARM_DESC(reset_crop, "reset cropping parameters at open(), default " | |
| "is 1 (yes) for compatibility with older applications"); | |
| MODULE_PARM_DESC(automute, "mute audio on bad/missing video signal, default is 1 (yes)"); | |
| MODULE_PARM_DESC(chroma_agc, "enables the AGC of chroma signal, default is 0 (no)"); | |
| MODULE_PARM_DESC(agc_crush, "enables the luminance AGC crush, default is 1 (yes)"); | |
| MODULE_PARM_DESC(whitecrush_upper, "sets the white crush upper value, default is 207"); | |
| MODULE_PARM_DESC(whitecrush_lower, "sets the white crush lower value, default is 127"); | |
| MODULE_PARM_DESC(vcr_hack, "enables the VCR hack (improves synch on poor VCR tapes), default is 0 (no)"); | |
| MODULE_PARM_DESC(irq_iswitch, "switch inputs in irq handler"); | |
| MODULE_PARM_DESC(uv_ratio, "ratio between u and v gains, default is 50"); | |
| MODULE_PARM_DESC(full_luma_range, "use the full luma range, default is 0 (no)"); | |
| MODULE_PARM_DESC(coring, "set the luma coring level, default is 0 (no)"); | |
| MODULE_PARM_DESC(video_nr, "video device numbers"); | |
| MODULE_PARM_DESC(vbi_nr, "vbi device numbers"); | |
| MODULE_PARM_DESC(radio_nr, "radio device numbers"); | |
| MODULE_DESCRIPTION("bttv - v4l/v4l2 driver module for bt848/878 based cards"); | |
| MODULE_AUTHOR("Ralph Metzler & Marcus Metzler & Gerd Knorr"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_VERSION(BTTV_VERSION); | |
| #define V4L2_CID_PRIVATE_COMBFILTER (V4L2_CID_USER_BTTV_BASE + 0) | |
| #define V4L2_CID_PRIVATE_AUTOMUTE (V4L2_CID_USER_BTTV_BASE + 1) | |
| #define V4L2_CID_PRIVATE_LUMAFILTER (V4L2_CID_USER_BTTV_BASE + 2) | |
| #define V4L2_CID_PRIVATE_AGC_CRUSH (V4L2_CID_USER_BTTV_BASE + 3) | |
| #define V4L2_CID_PRIVATE_VCR_HACK (V4L2_CID_USER_BTTV_BASE + 4) | |
| #define V4L2_CID_PRIVATE_WHITECRUSH_LOWER (V4L2_CID_USER_BTTV_BASE + 5) | |
| #define V4L2_CID_PRIVATE_WHITECRUSH_UPPER (V4L2_CID_USER_BTTV_BASE + 6) | |
| #define V4L2_CID_PRIVATE_UV_RATIO (V4L2_CID_USER_BTTV_BASE + 7) | |
| #define V4L2_CID_PRIVATE_FULL_LUMA_RANGE (V4L2_CID_USER_BTTV_BASE + 8) | |
| #define V4L2_CID_PRIVATE_CORING (V4L2_CID_USER_BTTV_BASE + 9) | |
| /* ----------------------------------------------------------------------- */ | |
| /* sysfs */ | |
| static ssize_t show_card(struct device *cd, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct video_device *vfd = to_video_device(cd); | |
| struct bttv *btv = video_get_drvdata(vfd); | |
| return sprintf(buf, "%d\n", btv ? btv->c.type : UNSET); | |
| } | |
| static DEVICE_ATTR(card, S_IRUGO, show_card, NULL); | |
| /* ----------------------------------------------------------------------- */ | |
| /* dvb auto-load setup */ | |
| #if defined(CONFIG_MODULES) && defined(MODULE) | |
| static void request_module_async(struct work_struct *work) | |
| { | |
| request_module("dvb-bt8xx"); | |
| } | |
| static void request_modules(struct bttv *dev) | |
| { | |
| INIT_WORK(&dev->request_module_wk, request_module_async); | |
| schedule_work(&dev->request_module_wk); | |
| } | |
| static void flush_request_modules(struct bttv *dev) | |
| { | |
| flush_work(&dev->request_module_wk); | |
| } | |
| #else | |
| #define request_modules(dev) | |
| #define flush_request_modules(dev) do {} while(0) | |
| #endif /* CONFIG_MODULES */ | |
| /* ----------------------------------------------------------------------- */ | |
| /* static data */ | |
| /* special timing tables from conexant... */ | |
| static u8 SRAM_Table[][60] = | |
| { | |
| /* PAL digital input over GPIO[7:0] */ | |
| { | |
| 45, // 45 bytes following | |
| 0x36,0x11,0x01,0x00,0x90,0x02,0x05,0x10,0x04,0x16, | |
| 0x12,0x05,0x11,0x00,0x04,0x12,0xC0,0x00,0x31,0x00, | |
| 0x06,0x51,0x08,0x03,0x89,0x08,0x07,0xC0,0x44,0x00, | |
| 0x81,0x01,0x01,0xA9,0x0D,0x02,0x02,0x50,0x03,0x37, | |
| 0x37,0x00,0xAF,0x21,0x00 | |
| }, | |
| /* NTSC digital input over GPIO[7:0] */ | |
| { | |
| 51, // 51 bytes following | |
| 0x0C,0xC0,0x00,0x00,0x90,0x02,0x03,0x10,0x03,0x06, | |
| 0x10,0x04,0x12,0x12,0x05,0x02,0x13,0x04,0x19,0x00, | |
| 0x04,0x39,0x00,0x06,0x59,0x08,0x03,0x83,0x08,0x07, | |
| 0x03,0x50,0x00,0xC0,0x40,0x00,0x86,0x01,0x01,0xA6, | |
| 0x0D,0x02,0x03,0x11,0x01,0x05,0x37,0x00,0xAC,0x21, | |
| 0x00, | |
| }, | |
| // TGB_NTSC392 // quartzsight | |
| // This table has been modified to be used for Fusion Rev D | |
| { | |
| 0x2A, // size of table = 42 | |
| 0x06, 0x08, 0x04, 0x0a, 0xc0, 0x00, 0x18, 0x08, 0x03, 0x24, | |
| 0x08, 0x07, 0x02, 0x90, 0x02, 0x08, 0x10, 0x04, 0x0c, 0x10, | |
| 0x05, 0x2c, 0x11, 0x04, 0x55, 0x48, 0x00, 0x05, 0x50, 0x00, | |
| 0xbf, 0x0c, 0x02, 0x2f, 0x3d, 0x00, 0x2f, 0x3f, 0x00, 0xc3, | |
| 0x20, 0x00 | |
| } | |
| }; | |
| /* minhdelayx1 first video pixel we can capture on a line and | |
| hdelayx1 start of active video, both relative to rising edge of | |
| /HRESET pulse (0H) in 1 / fCLKx1. | |
| swidth width of active video and | |
| totalwidth total line width, both in 1 / fCLKx1. | |
| sqwidth total line width in square pixels. | |
| vdelay start of active video in 2 * field lines relative to | |
| trailing edge of /VRESET pulse (VDELAY register). | |
| sheight height of active video in 2 * field lines. | |
| extraheight Added to sheight for cropcap.bounds.height only | |
| videostart0 ITU-R frame line number of the line corresponding | |
| to vdelay in the first field. */ | |
| #define CROPCAP(minhdelayx1, hdelayx1, swidth, totalwidth, sqwidth, \ | |
| vdelay, sheight, extraheight, videostart0) \ | |
| .cropcap.bounds.left = minhdelayx1, \ | |
| /* * 2 because vertically we count field lines times two, */ \ | |
| /* e.g. 23 * 2 to 23 * 2 + 576 in PAL-BGHI defrect. */ \ | |
| .cropcap.bounds.top = (videostart0) * 2 - (vdelay) + MIN_VDELAY, \ | |
| /* 4 is a safety margin at the end of the line. */ \ | |
| .cropcap.bounds.width = (totalwidth) - (minhdelayx1) - 4, \ | |
| .cropcap.bounds.height = (sheight) + (extraheight) + (vdelay) - \ | |
| MIN_VDELAY, \ | |
| .cropcap.defrect.left = hdelayx1, \ | |
| .cropcap.defrect.top = (videostart0) * 2, \ | |
| .cropcap.defrect.width = swidth, \ | |
| .cropcap.defrect.height = sheight, \ | |
| .cropcap.pixelaspect.numerator = totalwidth, \ | |
| .cropcap.pixelaspect.denominator = sqwidth, | |
| const struct bttv_tvnorm bttv_tvnorms[] = { | |
| /* PAL-BDGHI */ | |
| /* max. active video is actually 922, but 924 is divisible by 4 and 3! */ | |
| /* actually, max active PAL with HSCALE=0 is 948, NTSC is 768 - nil */ | |
| { | |
| .v4l2_id = V4L2_STD_PAL, | |
| .name = "PAL", | |
| .Fsc = 35468950, | |
| .swidth = 924, | |
| .sheight = 576, | |
| .totalwidth = 1135, | |
| .adelay = 0x7f, | |
| .bdelay = 0x72, | |
| .iform = (BT848_IFORM_PAL_BDGHI|BT848_IFORM_XT1), | |
| .scaledtwidth = 1135, | |
| .hdelayx1 = 186, | |
| .hactivex1 = 924, | |
| .vdelay = 0x20, | |
| .vbipack = 255, /* min (2048 / 4, 0x1ff) & 0xff */ | |
| .sram = 0, | |
| /* ITU-R frame line number of the first VBI line | |
| we can capture, of the first and second field. | |
| The last line is determined by cropcap.bounds. */ | |
| .vbistart = { 7, 320 }, | |
| CROPCAP(/* minhdelayx1 */ 68, | |
| /* hdelayx1 */ 186, | |
| /* Should be (768 * 1135 + 944 / 2) / 944. | |
| cropcap.defrect is used for image width | |
| checks, so we keep the old value 924. */ | |
| /* swidth */ 924, | |
| /* totalwidth */ 1135, | |
| /* sqwidth */ 944, | |
| /* vdelay */ 0x20, | |
| /* sheight */ 576, | |
| /* bt878 (and bt848?) can capture another | |
| line below active video. */ | |
| /* extraheight */ 2, | |
| /* videostart0 */ 23) | |
| },{ | |
| .v4l2_id = V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_KR, | |
| .name = "NTSC", | |
| .Fsc = 28636363, | |
| .swidth = 768, | |
| .sheight = 480, | |
| .totalwidth = 910, | |
| .adelay = 0x68, | |
| .bdelay = 0x5d, | |
| .iform = (BT848_IFORM_NTSC|BT848_IFORM_XT0), | |
| .scaledtwidth = 910, | |
| .hdelayx1 = 128, | |
| .hactivex1 = 910, | |
| .vdelay = 0x1a, | |
| .vbipack = 144, /* min (1600 / 4, 0x1ff) & 0xff */ | |
| .sram = 1, | |
| .vbistart = { 10, 273 }, | |
| CROPCAP(/* minhdelayx1 */ 68, | |
| /* hdelayx1 */ 128, | |
| /* Should be (640 * 910 + 780 / 2) / 780? */ | |
| /* swidth */ 768, | |
| /* totalwidth */ 910, | |
| /* sqwidth */ 780, | |
| /* vdelay */ 0x1a, | |
| /* sheight */ 480, | |
| /* extraheight */ 0, | |
| /* videostart0 */ 23) | |
| },{ | |
| .v4l2_id = V4L2_STD_SECAM, | |
| .name = "SECAM", | |
| .Fsc = 35468950, | |
| .swidth = 924, | |
| .sheight = 576, | |
| .totalwidth = 1135, | |
| .adelay = 0x7f, | |
| .bdelay = 0xb0, | |
| .iform = (BT848_IFORM_SECAM|BT848_IFORM_XT1), | |
| .scaledtwidth = 1135, | |
| .hdelayx1 = 186, | |
| .hactivex1 = 922, | |
| .vdelay = 0x20, | |
| .vbipack = 255, | |
| .sram = 0, /* like PAL, correct? */ | |
| .vbistart = { 7, 320 }, | |
| CROPCAP(/* minhdelayx1 */ 68, | |
| /* hdelayx1 */ 186, | |
| /* swidth */ 924, | |
| /* totalwidth */ 1135, | |
| /* sqwidth */ 944, | |
| /* vdelay */ 0x20, | |
| /* sheight */ 576, | |
| /* extraheight */ 0, | |
| /* videostart0 */ 23) | |
| },{ | |
| .v4l2_id = V4L2_STD_PAL_Nc, | |
| .name = "PAL-Nc", | |
| .Fsc = 28636363, | |
| .swidth = 640, | |
| .sheight = 576, | |
| .totalwidth = 910, | |
| .adelay = 0x68, | |
| .bdelay = 0x5d, | |
| .iform = (BT848_IFORM_PAL_NC|BT848_IFORM_XT0), | |
| .scaledtwidth = 780, | |
| .hdelayx1 = 130, | |
| .hactivex1 = 734, | |
| .vdelay = 0x1a, | |
| .vbipack = 144, | |
| .sram = -1, | |
| .vbistart = { 7, 320 }, | |
| CROPCAP(/* minhdelayx1 */ 68, | |
| /* hdelayx1 */ 130, | |
| /* swidth */ (640 * 910 + 780 / 2) / 780, | |
| /* totalwidth */ 910, | |
| /* sqwidth */ 780, | |
| /* vdelay */ 0x1a, | |
| /* sheight */ 576, | |
| /* extraheight */ 0, | |
| /* videostart0 */ 23) | |
| },{ | |
| .v4l2_id = V4L2_STD_PAL_M, | |
| .name = "PAL-M", | |
| .Fsc = 28636363, | |
| .swidth = 640, | |
| .sheight = 480, | |
| .totalwidth = 910, | |
| .adelay = 0x68, | |
| .bdelay = 0x5d, | |
| .iform = (BT848_IFORM_PAL_M|BT848_IFORM_XT0), | |
| .scaledtwidth = 780, | |
| .hdelayx1 = 135, | |
| .hactivex1 = 754, | |
| .vdelay = 0x1a, | |
| .vbipack = 144, | |
| .sram = -1, | |
| .vbistart = { 10, 273 }, | |
| CROPCAP(/* minhdelayx1 */ 68, | |
| /* hdelayx1 */ 135, | |
| /* swidth */ (640 * 910 + 780 / 2) / 780, | |
| /* totalwidth */ 910, | |
| /* sqwidth */ 780, | |
| /* vdelay */ 0x1a, | |
| /* sheight */ 480, | |
| /* extraheight */ 0, | |
| /* videostart0 */ 23) | |
| },{ | |
| .v4l2_id = V4L2_STD_PAL_N, | |
| .name = "PAL-N", | |
| .Fsc = 35468950, | |
| .swidth = 768, | |
| .sheight = 576, | |
| .totalwidth = 1135, | |
| .adelay = 0x7f, | |
| .bdelay = 0x72, | |
| .iform = (BT848_IFORM_PAL_N|BT848_IFORM_XT1), | |
| .scaledtwidth = 944, | |
| .hdelayx1 = 186, | |
| .hactivex1 = 922, | |
| .vdelay = 0x20, | |
| .vbipack = 144, | |
| .sram = -1, | |
| .vbistart = { 7, 320 }, | |
| CROPCAP(/* minhdelayx1 */ 68, | |
| /* hdelayx1 */ 186, | |
| /* swidth */ (768 * 1135 + 944 / 2) / 944, | |
| /* totalwidth */ 1135, | |
| /* sqwidth */ 944, | |
| /* vdelay */ 0x20, | |
| /* sheight */ 576, | |
| /* extraheight */ 0, | |
| /* videostart0 */ 23) | |
| },{ | |
| .v4l2_id = V4L2_STD_NTSC_M_JP, | |
| .name = "NTSC-JP", | |
| .Fsc = 28636363, | |
| .swidth = 640, | |
| .sheight = 480, | |
| .totalwidth = 910, | |
| .adelay = 0x68, | |
| .bdelay = 0x5d, | |
| .iform = (BT848_IFORM_NTSC_J|BT848_IFORM_XT0), | |
| .scaledtwidth = 780, | |
| .hdelayx1 = 135, | |
| .hactivex1 = 754, | |
| .vdelay = 0x16, | |
| .vbipack = 144, | |
| .sram = -1, | |
| .vbistart = { 10, 273 }, | |
| CROPCAP(/* minhdelayx1 */ 68, | |
| /* hdelayx1 */ 135, | |
| /* swidth */ (640 * 910 + 780 / 2) / 780, | |
| /* totalwidth */ 910, | |
| /* sqwidth */ 780, | |
| /* vdelay */ 0x16, | |
| /* sheight */ 480, | |
| /* extraheight */ 0, | |
| /* videostart0 */ 23) | |
| },{ | |
| /* that one hopefully works with the strange timing | |
| * which video recorders produce when playing a NTSC | |
| * tape on a PAL TV ... */ | |
| .v4l2_id = V4L2_STD_PAL_60, | |
| .name = "PAL-60", | |
| .Fsc = 35468950, | |
| .swidth = 924, | |
| .sheight = 480, | |
| .totalwidth = 1135, | |
| .adelay = 0x7f, | |
| .bdelay = 0x72, | |
| .iform = (BT848_IFORM_PAL_BDGHI|BT848_IFORM_XT1), | |
| .scaledtwidth = 1135, | |
| .hdelayx1 = 186, | |
| .hactivex1 = 924, | |
| .vdelay = 0x1a, | |
| .vbipack = 255, | |
| .vtotal = 524, | |
| .sram = -1, | |
| .vbistart = { 10, 273 }, | |
| CROPCAP(/* minhdelayx1 */ 68, | |
| /* hdelayx1 */ 186, | |
| /* swidth */ 924, | |
| /* totalwidth */ 1135, | |
| /* sqwidth */ 944, | |
| /* vdelay */ 0x1a, | |
| /* sheight */ 480, | |
| /* extraheight */ 0, | |
| /* videostart0 */ 23) | |
| } | |
| }; | |
| static const unsigned int BTTV_TVNORMS = ARRAY_SIZE(bttv_tvnorms); | |
| /* ----------------------------------------------------------------------- */ | |
| /* bttv format list | |
| packed pixel formats must come first */ | |
| static const struct bttv_format formats[] = { | |
| { | |
| .name = "8 bpp, gray", | |
| .fourcc = V4L2_PIX_FMT_GREY, | |
| .btformat = BT848_COLOR_FMT_Y8, | |
| .depth = 8, | |
| .flags = FORMAT_FLAGS_PACKED, | |
| },{ | |
| .name = "8 bpp, dithered color", | |
| .fourcc = V4L2_PIX_FMT_HI240, | |
| .btformat = BT848_COLOR_FMT_RGB8, | |
| .depth = 8, | |
| .flags = FORMAT_FLAGS_PACKED | FORMAT_FLAGS_DITHER, | |
| },{ | |
| .name = "15 bpp RGB, le", | |
| .fourcc = V4L2_PIX_FMT_RGB555, | |
| .btformat = BT848_COLOR_FMT_RGB15, | |
| .depth = 16, | |
| .flags = FORMAT_FLAGS_PACKED, | |
| },{ | |
| .name = "15 bpp RGB, be", | |
| .fourcc = V4L2_PIX_FMT_RGB555X, | |
| .btformat = BT848_COLOR_FMT_RGB15, | |
| .btswap = 0x03, /* byteswap */ | |
| .depth = 16, | |
| .flags = FORMAT_FLAGS_PACKED, | |
| },{ | |
| .name = "16 bpp RGB, le", | |
| .fourcc = V4L2_PIX_FMT_RGB565, | |
| .btformat = BT848_COLOR_FMT_RGB16, | |
| .depth = 16, | |
| .flags = FORMAT_FLAGS_PACKED, | |
| },{ | |
| .name = "16 bpp RGB, be", | |
| .fourcc = V4L2_PIX_FMT_RGB565X, | |
| .btformat = BT848_COLOR_FMT_RGB16, | |
| .btswap = 0x03, /* byteswap */ | |
| .depth = 16, | |
| .flags = FORMAT_FLAGS_PACKED, | |
| },{ | |
| .name = "24 bpp RGB, le", | |
| .fourcc = V4L2_PIX_FMT_BGR24, | |
| .btformat = BT848_COLOR_FMT_RGB24, | |
| .depth = 24, | |
| .flags = FORMAT_FLAGS_PACKED, | |
| },{ | |
| .name = "32 bpp RGB, le", | |
| .fourcc = V4L2_PIX_FMT_BGR32, | |
| .btformat = BT848_COLOR_FMT_RGB32, | |
| .depth = 32, | |
| .flags = FORMAT_FLAGS_PACKED, | |
| },{ | |
| .name = "32 bpp RGB, be", | |
| .fourcc = V4L2_PIX_FMT_RGB32, | |
| .btformat = BT848_COLOR_FMT_RGB32, | |
| .btswap = 0x0f, /* byte+word swap */ | |
| .depth = 32, | |
| .flags = FORMAT_FLAGS_PACKED, | |
| },{ | |
| .name = "4:2:2, packed, YUYV", | |
| .fourcc = V4L2_PIX_FMT_YUYV, | |
| .btformat = BT848_COLOR_FMT_YUY2, | |
| .depth = 16, | |
| .flags = FORMAT_FLAGS_PACKED, | |
| },{ | |
| .name = "4:2:2, packed, UYVY", | |
| .fourcc = V4L2_PIX_FMT_UYVY, | |
| .btformat = BT848_COLOR_FMT_YUY2, | |
| .btswap = 0x03, /* byteswap */ | |
| .depth = 16, | |
| .flags = FORMAT_FLAGS_PACKED, | |
| },{ | |
| .name = "4:2:2, planar, Y-Cb-Cr", | |
| .fourcc = V4L2_PIX_FMT_YUV422P, | |
| .btformat = BT848_COLOR_FMT_YCrCb422, | |
| .depth = 16, | |
| .flags = FORMAT_FLAGS_PLANAR, | |
| .hshift = 1, | |
| .vshift = 0, | |
| },{ | |
| .name = "4:2:0, planar, Y-Cb-Cr", | |
| .fourcc = V4L2_PIX_FMT_YUV420, | |
| .btformat = BT848_COLOR_FMT_YCrCb422, | |
| .depth = 12, | |
| .flags = FORMAT_FLAGS_PLANAR, | |
| .hshift = 1, | |
| .vshift = 1, | |
| },{ | |
| .name = "4:2:0, planar, Y-Cr-Cb", | |
| .fourcc = V4L2_PIX_FMT_YVU420, | |
| .btformat = BT848_COLOR_FMT_YCrCb422, | |
| .depth = 12, | |
| .flags = FORMAT_FLAGS_PLANAR | FORMAT_FLAGS_CrCb, | |
| .hshift = 1, | |
| .vshift = 1, | |
| },{ | |
| .name = "4:1:1, planar, Y-Cb-Cr", | |
| .fourcc = V4L2_PIX_FMT_YUV411P, | |
| .btformat = BT848_COLOR_FMT_YCrCb411, | |
| .depth = 12, | |
| .flags = FORMAT_FLAGS_PLANAR, | |
| .hshift = 2, | |
| .vshift = 0, | |
| },{ | |
| .name = "4:1:0, planar, Y-Cb-Cr", | |
| .fourcc = V4L2_PIX_FMT_YUV410, | |
| .btformat = BT848_COLOR_FMT_YCrCb411, | |
| .depth = 9, | |
| .flags = FORMAT_FLAGS_PLANAR, | |
| .hshift = 2, | |
| .vshift = 2, | |
| },{ | |
| .name = "4:1:0, planar, Y-Cr-Cb", | |
| .fourcc = V4L2_PIX_FMT_YVU410, | |
| .btformat = BT848_COLOR_FMT_YCrCb411, | |
| .depth = 9, | |
| .flags = FORMAT_FLAGS_PLANAR | FORMAT_FLAGS_CrCb, | |
| .hshift = 2, | |
| .vshift = 2, | |
| },{ | |
| .name = "raw scanlines", | |
| .fourcc = -1, | |
| .btformat = BT848_COLOR_FMT_RAW, | |
| .depth = 8, | |
| .flags = FORMAT_FLAGS_RAW, | |
| } | |
| }; | |
| static const unsigned int FORMATS = ARRAY_SIZE(formats); | |
| /* ----------------------------------------------------------------------- */ | |
| /* resource management */ | |
| /* | |
| RESOURCE_ allocated by freed by | |
| VIDEO_READ bttv_read 1) bttv_read 2) | |
| VIDEO_STREAM VIDIOC_STREAMON VIDIOC_STREAMOFF | |
| VIDIOC_QBUF 1) bttv_release | |
| VIDIOCMCAPTURE 1) | |
| OVERLAY VIDIOCCAPTURE on VIDIOCCAPTURE off | |
| VIDIOC_OVERLAY on VIDIOC_OVERLAY off | |
| 3) bttv_release | |
| VBI VIDIOC_STREAMON VIDIOC_STREAMOFF | |
| VIDIOC_QBUF 1) bttv_release | |
| bttv_read, bttv_poll 1) 4) | |
| 1) The resource must be allocated when we enter buffer prepare functions | |
| and remain allocated while buffers are in the DMA queue. | |
| 2) This is a single frame read. | |
| 3) VIDIOC_S_FBUF and VIDIOC_S_FMT (OVERLAY) still work when | |
| RESOURCE_OVERLAY is allocated. | |
| 4) This is a continuous read, implies VIDIOC_STREAMON. | |
| Note this driver permits video input and standard changes regardless if | |
| resources are allocated. | |
| */ | |
| #define VBI_RESOURCES (RESOURCE_VBI) | |
| #define VIDEO_RESOURCES (RESOURCE_VIDEO_READ | \ | |
| RESOURCE_VIDEO_STREAM | \ | |
| RESOURCE_OVERLAY) | |
| static | |
| int check_alloc_btres_lock(struct bttv *btv, struct bttv_fh *fh, int bit) | |
| { | |
| int xbits; /* mutual exclusive resources */ | |
| if (fh->resources & bit) | |
| /* have it already allocated */ | |
| return 1; | |
| xbits = bit; | |
| if (bit & (RESOURCE_VIDEO_READ | RESOURCE_VIDEO_STREAM)) | |
| xbits |= RESOURCE_VIDEO_READ | RESOURCE_VIDEO_STREAM; | |
| /* is it free? */ | |
| if (btv->resources & xbits) { | |
| /* no, someone else uses it */ | |
| goto fail; | |
| } | |
| if ((bit & VIDEO_RESOURCES) | |
| && 0 == (btv->resources & VIDEO_RESOURCES)) { | |
| /* Do crop - use current, don't - use default parameters. */ | |
| __s32 top = btv->crop[!!fh->do_crop].rect.top; | |
| if (btv->vbi_end > top) | |
| goto fail; | |
| /* We cannot capture the same line as video and VBI data. | |
| Claim scan lines crop[].rect.top to bottom. */ | |
| btv->crop_start = top; | |
| } else if (bit & VBI_RESOURCES) { | |
| __s32 end = fh->vbi_fmt.end; | |
| if (end > btv->crop_start) | |
| goto fail; | |
| /* Claim scan lines above fh->vbi_fmt.end. */ | |
| btv->vbi_end = end; | |
| } | |
| /* it's free, grab it */ | |
| fh->resources |= bit; | |
| btv->resources |= bit; | |
| return 1; | |
| fail: | |
| return 0; | |
| } | |
| static | |
| int check_btres(struct bttv_fh *fh, int bit) | |
| { | |
| return (fh->resources & bit); | |
| } | |
| static | |
| int locked_btres(struct bttv *btv, int bit) | |
| { | |
| return (btv->resources & bit); | |
| } | |
| /* Call with btv->lock down. */ | |
| static void | |
| disclaim_vbi_lines(struct bttv *btv) | |
| { | |
| btv->vbi_end = 0; | |
| } | |
| /* Call with btv->lock down. */ | |
| static void | |
| disclaim_video_lines(struct bttv *btv) | |
| { | |
| const struct bttv_tvnorm *tvnorm; | |
| u8 crop; | |
| tvnorm = &bttv_tvnorms[btv->tvnorm]; | |
| btv->crop_start = tvnorm->cropcap.bounds.top | |
| + tvnorm->cropcap.bounds.height; | |
| /* VBI capturing ends at VDELAY, start of video capturing, no | |
| matter how many lines the VBI RISC program expects. When video | |
| capturing is off, it shall no longer "preempt" VBI capturing, | |
| so we set VDELAY to maximum. */ | |
| crop = btread(BT848_E_CROP) | 0xc0; | |
| btwrite(crop, BT848_E_CROP); | |
| btwrite(0xfe, BT848_E_VDELAY_LO); | |
| btwrite(crop, BT848_O_CROP); | |
| btwrite(0xfe, BT848_O_VDELAY_LO); | |
| } | |
| static | |
| void free_btres_lock(struct bttv *btv, struct bttv_fh *fh, int bits) | |
| { | |
| if ((fh->resources & bits) != bits) { | |
| /* trying to free resources not allocated by us ... */ | |
| pr_err("BUG! (btres)\n"); | |
| } | |
| fh->resources &= ~bits; | |
| btv->resources &= ~bits; | |
| bits = btv->resources; | |
| if (0 == (bits & VIDEO_RESOURCES)) | |
| disclaim_video_lines(btv); | |
| if (0 == (bits & VBI_RESOURCES)) | |
| disclaim_vbi_lines(btv); | |
| } | |
| /* ----------------------------------------------------------------------- */ | |
| /* If Bt848a or Bt849, use PLL for PAL/SECAM and crystal for NTSC */ | |
| /* Frequency = (F_input / PLL_X) * PLL_I.PLL_F/PLL_C | |
| PLL_X = Reference pre-divider (0=1, 1=2) | |
| PLL_C = Post divider (0=6, 1=4) | |
| PLL_I = Integer input | |
| PLL_F = Fractional input | |
| F_input = 28.636363 MHz: | |
| PAL (CLKx2 = 35.46895 MHz): PLL_X = 1, PLL_I = 0x0E, PLL_F = 0xDCF9, PLL_C = 0 | |
| */ | |
| static void set_pll_freq(struct bttv *btv, unsigned int fin, unsigned int fout) | |
| { | |
| unsigned char fl, fh, fi; | |
| /* prevent overflows */ | |
| fin/=4; | |
| fout/=4; | |
| fout*=12; | |
| fi=fout/fin; | |
| fout=(fout%fin)*256; | |
| fh=fout/fin; | |
| fout=(fout%fin)*256; | |
| fl=fout/fin; | |
| btwrite(fl, BT848_PLL_F_LO); | |
| btwrite(fh, BT848_PLL_F_HI); | |
| btwrite(fi|BT848_PLL_X, BT848_PLL_XCI); | |
| } | |
| static void set_pll(struct bttv *btv) | |
| { | |
| int i; | |
| if (!btv->pll.pll_crystal) | |
| return; | |
| if (btv->pll.pll_ofreq == btv->pll.pll_current) { | |
| dprintk("%d: PLL: no change required\n", btv->c.nr); | |
| return; | |
| } | |
| if (btv->pll.pll_ifreq == btv->pll.pll_ofreq) { | |
| /* no PLL needed */ | |
| if (btv->pll.pll_current == 0) | |
| return; | |
| if (bttv_verbose) | |
| pr_info("%d: PLL can sleep, using XTAL (%d)\n", | |
| btv->c.nr, btv->pll.pll_ifreq); | |
| btwrite(0x00,BT848_TGCTRL); | |
| btwrite(0x00,BT848_PLL_XCI); | |
| btv->pll.pll_current = 0; | |
| return; | |
| } | |
| if (bttv_verbose) | |
| pr_info("%d: Setting PLL: %d => %d (needs up to 100ms)\n", | |
| btv->c.nr, | |
| btv->pll.pll_ifreq, btv->pll.pll_ofreq); | |
| set_pll_freq(btv, btv->pll.pll_ifreq, btv->pll.pll_ofreq); | |
| for (i=0; i<10; i++) { | |
| /* Let other people run while the PLL stabilizes */ | |
| msleep(10); | |
| if (btread(BT848_DSTATUS) & BT848_DSTATUS_PLOCK) { | |
| btwrite(0,BT848_DSTATUS); | |
| } else { | |
| btwrite(0x08,BT848_TGCTRL); | |
| btv->pll.pll_current = btv->pll.pll_ofreq; | |
| if (bttv_verbose) | |
| pr_info("PLL set ok\n"); | |
| return; | |
| } | |
| } | |
| btv->pll.pll_current = -1; | |
| if (bttv_verbose) | |
| pr_info("Setting PLL failed\n"); | |
| return; | |
| } | |
| /* used to switch between the bt848's analog/digital video capture modes */ | |
| static void bt848A_set_timing(struct bttv *btv) | |
| { | |
| int i, len; | |
| int table_idx = bttv_tvnorms[btv->tvnorm].sram; | |
| int fsc = bttv_tvnorms[btv->tvnorm].Fsc; | |
| if (btv->input == btv->dig) { | |
| dprintk("%d: load digital timing table (table_idx=%d)\n", | |
| btv->c.nr,table_idx); | |
| /* timing change...reset timing generator address */ | |
| btwrite(0x00, BT848_TGCTRL); | |
| btwrite(0x02, BT848_TGCTRL); | |
| btwrite(0x00, BT848_TGCTRL); | |
| len=SRAM_Table[table_idx][0]; | |
| for(i = 1; i <= len; i++) | |
| btwrite(SRAM_Table[table_idx][i],BT848_TGLB); | |
| btv->pll.pll_ofreq = 27000000; | |
| set_pll(btv); | |
| btwrite(0x11, BT848_TGCTRL); | |
| btwrite(0x41, BT848_DVSIF); | |
| } else { | |
| btv->pll.pll_ofreq = fsc; | |
| set_pll(btv); | |
| btwrite(0x0, BT848_DVSIF); | |
| } | |
| } | |
| /* ----------------------------------------------------------------------- */ | |
| static void bt848_bright(struct bttv *btv, int bright) | |
| { | |
| int value; | |
| // printk("set bright: %d\n", bright); // DEBUG | |
| btv->bright = bright; | |
| /* We want -128 to 127 we get 0-65535 */ | |
| value = (bright >> 8) - 128; | |
| btwrite(value & 0xff, BT848_BRIGHT); | |
| } | |
| static void bt848_hue(struct bttv *btv, int hue) | |
| { | |
| int value; | |
| btv->hue = hue; | |
| /* -128 to 127 */ | |
| value = (hue >> 8) - 128; | |
| btwrite(value & 0xff, BT848_HUE); | |
| } | |
| static void bt848_contrast(struct bttv *btv, int cont) | |
| { | |
| int value,hibit; | |
| btv->contrast = cont; | |
| /* 0-511 */ | |
| value = (cont >> 7); | |
| hibit = (value >> 6) & 4; | |
| btwrite(value & 0xff, BT848_CONTRAST_LO); | |
| btaor(hibit, ~4, BT848_E_CONTROL); | |
| btaor(hibit, ~4, BT848_O_CONTROL); | |
| } | |
| static void bt848_sat(struct bttv *btv, int color) | |
| { | |
| int val_u,val_v,hibits; | |
| btv->saturation = color; | |
| /* 0-511 for the color */ | |
| val_u = ((color * btv->opt_uv_ratio) / 50) >> 7; | |
| val_v = (((color * (100 - btv->opt_uv_ratio) / 50) >>7)*180L)/254; | |
| hibits = (val_u >> 7) & 2; | |
| hibits |= (val_v >> 8) & 1; | |
| btwrite(val_u & 0xff, BT848_SAT_U_LO); | |
| btwrite(val_v & 0xff, BT848_SAT_V_LO); | |
| btaor(hibits, ~3, BT848_E_CONTROL); | |
| btaor(hibits, ~3, BT848_O_CONTROL); | |
| } | |
| /* ----------------------------------------------------------------------- */ | |
| static int | |
| video_mux(struct bttv *btv, unsigned int input) | |
| { | |
| int mux,mask2; | |
| if (input >= bttv_tvcards[btv->c.type].video_inputs) | |
| return -EINVAL; | |
| /* needed by RemoteVideo MX */ | |
| mask2 = bttv_tvcards[btv->c.type].gpiomask2; | |
| if (mask2) | |
| gpio_inout(mask2,mask2); | |
| if (input == btv->svhs) { | |
| btor(BT848_CONTROL_COMP, BT848_E_CONTROL); | |
| btor(BT848_CONTROL_COMP, BT848_O_CONTROL); | |
| } else { | |
| btand(~BT848_CONTROL_COMP, BT848_E_CONTROL); | |
| btand(~BT848_CONTROL_COMP, BT848_O_CONTROL); | |
| } | |
| mux = bttv_muxsel(btv, input); | |
| btaor(mux<<5, ~(3<<5), BT848_IFORM); | |
| dprintk("%d: video mux: input=%d mux=%d\n", btv->c.nr, input, mux); | |
| /* card specific hook */ | |
| if(bttv_tvcards[btv->c.type].muxsel_hook) | |
| bttv_tvcards[btv->c.type].muxsel_hook (btv, input); | |
| return 0; | |
| } | |
| static char *audio_modes[] = { | |
| "audio: tuner", "audio: radio", "audio: extern", | |
| "audio: intern", "audio: mute" | |
| }; | |
| static void | |
| audio_mux_gpio(struct bttv *btv, int input, int mute) | |
| { | |
| int gpio_val, signal, mute_gpio; | |
| gpio_inout(bttv_tvcards[btv->c.type].gpiomask, | |
| bttv_tvcards[btv->c.type].gpiomask); | |
| signal = btread(BT848_DSTATUS) & BT848_DSTATUS_HLOC; | |
| /* automute */ | |
| mute_gpio = mute || (btv->opt_automute && (!signal || !btv->users) | |
| && !btv->has_radio_tuner); | |
| if (mute_gpio) | |
| gpio_val = bttv_tvcards[btv->c.type].gpiomute; | |
| else | |
| gpio_val = bttv_tvcards[btv->c.type].gpiomux[input]; | |
| switch (btv->c.type) { | |
| case BTTV_BOARD_VOODOOTV_FM: | |
| case BTTV_BOARD_VOODOOTV_200: | |
| gpio_val = bttv_tda9880_setnorm(btv, gpio_val); | |
| break; | |
| default: | |
| gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpio_val); | |
| } | |
| if (bttv_gpio) | |
| bttv_gpio_tracking(btv, audio_modes[mute_gpio ? 4 : input]); | |
| } | |
| static int | |
| audio_mute(struct bttv *btv, int mute) | |
| { | |
| struct v4l2_ctrl *ctrl; | |
| audio_mux_gpio(btv, btv->audio_input, mute); | |
| if (btv->sd_msp34xx) { | |
| ctrl = v4l2_ctrl_find(btv->sd_msp34xx->ctrl_handler, V4L2_CID_AUDIO_MUTE); | |
| if (ctrl) | |
| v4l2_ctrl_s_ctrl(ctrl, mute); | |
| } | |
| if (btv->sd_tvaudio) { | |
| ctrl = v4l2_ctrl_find(btv->sd_tvaudio->ctrl_handler, V4L2_CID_AUDIO_MUTE); | |
| if (ctrl) | |
| v4l2_ctrl_s_ctrl(ctrl, mute); | |
| } | |
| if (btv->sd_tda7432) { | |
| ctrl = v4l2_ctrl_find(btv->sd_tda7432->ctrl_handler, V4L2_CID_AUDIO_MUTE); | |
| if (ctrl) | |
| v4l2_ctrl_s_ctrl(ctrl, mute); | |
| } | |
| return 0; | |
| } | |
| static int | |
| audio_input(struct bttv *btv, int input) | |
| { | |
| audio_mux_gpio(btv, input, btv->mute); | |
| if (btv->sd_msp34xx) { | |
| u32 in; | |
| /* Note: the inputs tuner/radio/extern/intern are translated | |
| to msp routings. This assumes common behavior for all msp3400 | |
| based TV cards. When this assumption fails, then the | |
| specific MSP routing must be added to the card table. | |
| For now this is sufficient. */ | |
| switch (input) { | |
| case TVAUDIO_INPUT_RADIO: | |
| /* Some boards need the msp do to the radio demod */ | |
| if (btv->radio_uses_msp_demodulator) { | |
| in = MSP_INPUT_DEFAULT; | |
| break; | |
| } | |
| in = MSP_INPUT(MSP_IN_SCART2, MSP_IN_TUNER1, | |
| MSP_DSP_IN_SCART, MSP_DSP_IN_SCART); | |
| break; | |
| case TVAUDIO_INPUT_EXTERN: | |
| in = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, | |
| MSP_DSP_IN_SCART, MSP_DSP_IN_SCART); | |
| break; | |
| case TVAUDIO_INPUT_INTERN: | |
| /* Yes, this is the same input as for RADIO. I doubt | |
| if this is ever used. The only board with an INTERN | |
| input is the BTTV_BOARD_AVERMEDIA98. I wonder how | |
| that was tested. My guess is that the whole INTERN | |
| input does not work. */ | |
| in = MSP_INPUT(MSP_IN_SCART2, MSP_IN_TUNER1, | |
| MSP_DSP_IN_SCART, MSP_DSP_IN_SCART); | |
| break; | |
| case TVAUDIO_INPUT_TUNER: | |
| default: | |
| /* This is the only card that uses TUNER2, and afaik, | |
| is the only difference between the VOODOOTV_FM | |
| and VOODOOTV_200 */ | |
| if (btv->c.type == BTTV_BOARD_VOODOOTV_200) | |
| in = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER2, \ | |
| MSP_DSP_IN_TUNER, MSP_DSP_IN_TUNER); | |
| else | |
| in = MSP_INPUT_DEFAULT; | |
| break; | |
| } | |
| v4l2_subdev_call(btv->sd_msp34xx, audio, s_routing, | |
| in, MSP_OUTPUT_DEFAULT, 0); | |
| } | |
| if (btv->sd_tvaudio) { | |
| v4l2_subdev_call(btv->sd_tvaudio, audio, s_routing, | |
| input, 0, 0); | |
| } | |
| return 0; | |
| } | |
| static void | |
| bttv_crop_calc_limits(struct bttv_crop *c) | |
| { | |
| /* Scale factor min. 1:1, max. 16:1. Min. image size | |
| 48 x 32. Scaled width must be a multiple of 4. */ | |
| if (1) { | |
| /* For bug compatibility with VIDIOCGCAP and image | |
| size checks in earlier driver versions. */ | |
| c->min_scaled_width = 48; | |
| c->min_scaled_height = 32; | |
| } else { | |
| c->min_scaled_width = | |
| (max_t(unsigned int, 48, c->rect.width >> 4) + 3) & ~3; | |
| c->min_scaled_height = | |
| max_t(unsigned int, 32, c->rect.height >> 4); | |
| } | |
| c->max_scaled_width = c->rect.width & ~3; | |
| c->max_scaled_height = c->rect.height; | |
| } | |
| static void | |
| bttv_crop_reset(struct bttv_crop *c, unsigned int norm) | |
| { | |
| c->rect = bttv_tvnorms[norm].cropcap.defrect; | |
| bttv_crop_calc_limits(c); | |
| } | |
| /* Call with btv->lock down. */ | |
| static int | |
| set_tvnorm(struct bttv *btv, unsigned int norm) | |
| { | |
| const struct bttv_tvnorm *tvnorm; | |
| v4l2_std_id id; | |
| BUG_ON(norm >= BTTV_TVNORMS); | |
| BUG_ON(btv->tvnorm >= BTTV_TVNORMS); | |
| tvnorm = &bttv_tvnorms[norm]; | |
| if (memcmp(&bttv_tvnorms[btv->tvnorm].cropcap, &tvnorm->cropcap, | |
| sizeof (tvnorm->cropcap))) { | |
| bttv_crop_reset(&btv->crop[0], norm); | |
| btv->crop[1] = btv->crop[0]; /* current = default */ | |
| if (0 == (btv->resources & VIDEO_RESOURCES)) { | |
| btv->crop_start = tvnorm->cropcap.bounds.top | |
| + tvnorm->cropcap.bounds.height; | |
| } | |
| } | |
| btv->tvnorm = norm; | |
| btwrite(tvnorm->adelay, BT848_ADELAY); | |
| btwrite(tvnorm->bdelay, BT848_BDELAY); | |
| btaor(tvnorm->iform,~(BT848_IFORM_NORM|BT848_IFORM_XTBOTH), | |
| BT848_IFORM); | |
| btwrite(tvnorm->vbipack, BT848_VBI_PACK_SIZE); | |
| btwrite(1, BT848_VBI_PACK_DEL); | |
| bt848A_set_timing(btv); | |
| switch (btv->c.type) { | |
| case BTTV_BOARD_VOODOOTV_FM: | |
| case BTTV_BOARD_VOODOOTV_200: | |
| bttv_tda9880_setnorm(btv, gpio_read()); | |
| break; | |
| } | |
| id = tvnorm->v4l2_id; | |
| bttv_call_all(btv, video, s_std, id); | |
| return 0; | |
| } | |
| /* Call with btv->lock down. */ | |
| static void | |
| set_input(struct bttv *btv, unsigned int input, unsigned int norm) | |
| { | |
| unsigned long flags; | |
| btv->input = input; | |
| if (irq_iswitch) { | |
| spin_lock_irqsave(&btv->s_lock,flags); | |
| if (btv->curr.frame_irq) { | |
| /* active capture -> delayed input switch */ | |
| btv->new_input = input; | |
| } else { | |
| video_mux(btv,input); | |
| } | |
| spin_unlock_irqrestore(&btv->s_lock,flags); | |
| } else { | |
| video_mux(btv,input); | |
| } | |
| btv->audio_input = (btv->tuner_type != TUNER_ABSENT && input == 0) ? | |
| TVAUDIO_INPUT_TUNER : TVAUDIO_INPUT_EXTERN; | |
| audio_input(btv, btv->audio_input); | |
| set_tvnorm(btv, norm); | |
| } | |
| static void init_irqreg(struct bttv *btv) | |
| { | |
| /* clear status */ | |
| btwrite(0xfffffUL, BT848_INT_STAT); | |
| if (bttv_tvcards[btv->c.type].no_video) { | |
| /* i2c only */ | |
| btwrite(BT848_INT_I2CDONE, | |
| BT848_INT_MASK); | |
| } else { | |
| /* full video */ | |
| btwrite((btv->triton1) | | |
| (btv->gpioirq ? BT848_INT_GPINT : 0) | | |
| BT848_INT_SCERR | | |
| (fdsr ? BT848_INT_FDSR : 0) | | |
| BT848_INT_RISCI | BT848_INT_OCERR | | |
| BT848_INT_FMTCHG|BT848_INT_HLOCK| | |
| BT848_INT_I2CDONE, | |
| BT848_INT_MASK); | |
| } | |
| } | |
| static void init_bt848(struct bttv *btv) | |
| { | |
| if (bttv_tvcards[btv->c.type].no_video) { | |
| /* very basic init only */ | |
| init_irqreg(btv); | |
| return; | |
| } | |
| btwrite(0x00, BT848_CAP_CTL); | |
| btwrite(BT848_COLOR_CTL_GAMMA, BT848_COLOR_CTL); | |
| btwrite(BT848_IFORM_XTAUTO | BT848_IFORM_AUTO, BT848_IFORM); | |
| /* set planar and packed mode trigger points and */ | |
| /* set rising edge of inverted GPINTR pin as irq trigger */ | |
| btwrite(BT848_GPIO_DMA_CTL_PKTP_32| | |
| BT848_GPIO_DMA_CTL_PLTP1_16| | |
| BT848_GPIO_DMA_CTL_PLTP23_16| | |
| BT848_GPIO_DMA_CTL_GPINTC| | |
| BT848_GPIO_DMA_CTL_GPINTI, | |
| BT848_GPIO_DMA_CTL); | |
| btwrite(0x20, BT848_E_VSCALE_HI); | |
| btwrite(0x20, BT848_O_VSCALE_HI); | |
| v4l2_ctrl_handler_setup(&btv->ctrl_handler); | |
| /* interrupt */ | |
| init_irqreg(btv); | |
| } | |
| static void bttv_reinit_bt848(struct bttv *btv) | |
| { | |
| unsigned long flags; | |
| if (bttv_verbose) | |
| pr_info("%d: reset, reinitialize\n", btv->c.nr); | |
| spin_lock_irqsave(&btv->s_lock,flags); | |
| btv->errors=0; | |
| bttv_set_dma(btv,0); | |
| spin_unlock_irqrestore(&btv->s_lock,flags); | |
| init_bt848(btv); | |
| btv->pll.pll_current = -1; | |
| set_input(btv, btv->input, btv->tvnorm); | |
| } | |
| static int bttv_s_ctrl(struct v4l2_ctrl *c) | |
| { | |
| struct bttv *btv = container_of(c->handler, struct bttv, ctrl_handler); | |
| int val; | |
| switch (c->id) { | |
| case V4L2_CID_BRIGHTNESS: | |
| bt848_bright(btv, c->val); | |
| break; | |
| case V4L2_CID_HUE: | |
| bt848_hue(btv, c->val); | |
| break; | |
| case V4L2_CID_CONTRAST: | |
| bt848_contrast(btv, c->val); | |
| break; | |
| case V4L2_CID_SATURATION: | |
| bt848_sat(btv, c->val); | |
| break; | |
| case V4L2_CID_COLOR_KILLER: | |
| if (c->val) { | |
| btor(BT848_SCLOOP_CKILL, BT848_E_SCLOOP); | |
| btor(BT848_SCLOOP_CKILL, BT848_O_SCLOOP); | |
| } else { | |
| btand(~BT848_SCLOOP_CKILL, BT848_E_SCLOOP); | |
| btand(~BT848_SCLOOP_CKILL, BT848_O_SCLOOP); | |
| } | |
| break; | |
| case V4L2_CID_AUDIO_MUTE: | |
| audio_mute(btv, c->val); | |
| btv->mute = c->val; | |
| break; | |
| case V4L2_CID_AUDIO_VOLUME: | |
| btv->volume_gpio(btv, c->val); | |
| break; | |
| case V4L2_CID_CHROMA_AGC: | |
| val = c->val ? BT848_SCLOOP_CAGC : 0; | |
| btwrite(val, BT848_E_SCLOOP); | |
| btwrite(val, BT848_O_SCLOOP); | |
| break; | |
| case V4L2_CID_PRIVATE_COMBFILTER: | |
| btv->opt_combfilter = c->val; | |
| break; | |
| case V4L2_CID_PRIVATE_LUMAFILTER: | |
| if (c->val) { | |
| btand(~BT848_CONTROL_LDEC, BT848_E_CONTROL); | |
| btand(~BT848_CONTROL_LDEC, BT848_O_CONTROL); | |
| } else { | |
| btor(BT848_CONTROL_LDEC, BT848_E_CONTROL); | |
| btor(BT848_CONTROL_LDEC, BT848_O_CONTROL); | |
| } | |
| break; | |
| case V4L2_CID_PRIVATE_AUTOMUTE: | |
| btv->opt_automute = c->val; | |
| break; | |
| case V4L2_CID_PRIVATE_AGC_CRUSH: | |
| btwrite(BT848_ADC_RESERVED | | |
| (c->val ? BT848_ADC_CRUSH : 0), | |
| BT848_ADC); | |
| break; | |
| case V4L2_CID_PRIVATE_VCR_HACK: | |
| btv->opt_vcr_hack = c->val; | |
| break; | |
| case V4L2_CID_PRIVATE_WHITECRUSH_UPPER: | |
| btwrite(c->val, BT848_WC_UP); | |
| break; | |
| case V4L2_CID_PRIVATE_WHITECRUSH_LOWER: | |
| btwrite(c->val, BT848_WC_DOWN); | |
| break; | |
| case V4L2_CID_PRIVATE_UV_RATIO: | |
| btv->opt_uv_ratio = c->val; | |
| bt848_sat(btv, btv->saturation); | |
| break; | |
| case V4L2_CID_PRIVATE_FULL_LUMA_RANGE: | |
| btaor((c->val << 7), ~BT848_OFORM_RANGE, BT848_OFORM); | |
| break; | |
| case V4L2_CID_PRIVATE_CORING: | |
| btaor((c->val << 5), ~BT848_OFORM_CORE32, BT848_OFORM); | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| /* ----------------------------------------------------------------------- */ | |
| static const struct v4l2_ctrl_ops bttv_ctrl_ops = { | |
| .s_ctrl = bttv_s_ctrl, | |
| }; | |
| static struct v4l2_ctrl_config bttv_ctrl_combfilter = { | |
| .ops = &bttv_ctrl_ops, | |
| .id = V4L2_CID_PRIVATE_COMBFILTER, | |
| .name = "Comb Filter", | |
| .type = V4L2_CTRL_TYPE_BOOLEAN, | |
| .min = 0, | |
| .max = 1, | |
| .step = 1, | |
| .def = 1, | |
| }; | |
| static struct v4l2_ctrl_config bttv_ctrl_automute = { | |
| .ops = &bttv_ctrl_ops, | |
| .id = V4L2_CID_PRIVATE_AUTOMUTE, | |
| .name = "Auto Mute", | |
| .type = V4L2_CTRL_TYPE_BOOLEAN, | |
| .min = 0, | |
| .max = 1, | |
| .step = 1, | |
| .def = 1, | |
| }; | |
| static struct v4l2_ctrl_config bttv_ctrl_lumafilter = { | |
| .ops = &bttv_ctrl_ops, | |
| .id = V4L2_CID_PRIVATE_LUMAFILTER, | |
| .name = "Luma Decimation Filter", | |
| .type = V4L2_CTRL_TYPE_BOOLEAN, | |
| .min = 0, | |
| .max = 1, | |
| .step = 1, | |
| .def = 1, | |
| }; | |
| static struct v4l2_ctrl_config bttv_ctrl_agc_crush = { | |
| .ops = &bttv_ctrl_ops, | |
| .id = V4L2_CID_PRIVATE_AGC_CRUSH, | |
| .name = "AGC Crush", | |
| .type = V4L2_CTRL_TYPE_BOOLEAN, | |
| .min = 0, | |
| .max = 1, | |
| .step = 1, | |
| .def = 1, | |
| }; | |
| static struct v4l2_ctrl_config bttv_ctrl_vcr_hack = { | |
| .ops = &bttv_ctrl_ops, | |
| .id = V4L2_CID_PRIVATE_VCR_HACK, | |
| .name = "VCR Hack", | |
| .type = V4L2_CTRL_TYPE_BOOLEAN, | |
| .min = 0, | |
| .max = 1, | |
| .step = 1, | |
| .def = 1, | |
| }; | |
| static struct v4l2_ctrl_config bttv_ctrl_whitecrush_lower = { | |
| .ops = &bttv_ctrl_ops, | |
| .id = V4L2_CID_PRIVATE_WHITECRUSH_LOWER, | |
| .name = "Whitecrush Lower", | |
| .type = V4L2_CTRL_TYPE_INTEGER, | |
| .min = 0, | |
| .max = 255, | |
| .step = 1, | |
| .def = 0x7f, | |
| }; | |
| static struct v4l2_ctrl_config bttv_ctrl_whitecrush_upper = { | |
| .ops = &bttv_ctrl_ops, | |
| .id = V4L2_CID_PRIVATE_WHITECRUSH_UPPER, | |
| .name = "Whitecrush Upper", | |
| .type = V4L2_CTRL_TYPE_INTEGER, | |
| .min = 0, | |
| .max = 255, | |
| .step = 1, | |
| .def = 0xcf, | |
| }; | |
| static struct v4l2_ctrl_config bttv_ctrl_uv_ratio = { | |
| .ops = &bttv_ctrl_ops, | |
| .id = V4L2_CID_PRIVATE_UV_RATIO, | |
| .name = "UV Ratio", | |
| .type = V4L2_CTRL_TYPE_INTEGER, | |
| .min = 0, | |
| .max = 100, | |
| .step = 1, | |
| .def = 50, | |
| }; | |
| static struct v4l2_ctrl_config bttv_ctrl_full_luma = { | |
| .ops = &bttv_ctrl_ops, | |
| .id = V4L2_CID_PRIVATE_FULL_LUMA_RANGE, | |
| .name = "Full Luma Range", | |
| .type = V4L2_CTRL_TYPE_BOOLEAN, | |
| .min = 0, | |
| .max = 1, | |
| .step = 1, | |
| }; | |
| static struct v4l2_ctrl_config bttv_ctrl_coring = { | |
| .ops = &bttv_ctrl_ops, | |
| .id = V4L2_CID_PRIVATE_CORING, | |
| .name = "Coring", | |
| .type = V4L2_CTRL_TYPE_INTEGER, | |
| .min = 0, | |
| .max = 3, | |
| .step = 1, | |
| }; | |
| /* ----------------------------------------------------------------------- */ | |
| void bttv_gpio_tracking(struct bttv *btv, char *comment) | |
| { | |
| unsigned int outbits, data; | |
| outbits = btread(BT848_GPIO_OUT_EN); | |
| data = btread(BT848_GPIO_DATA); | |
| pr_debug("%d: gpio: en=%08x, out=%08x in=%08x [%s]\n", | |
| btv->c.nr, outbits, data & outbits, data & ~outbits, comment); | |
| } | |
| static void bttv_field_count(struct bttv *btv) | |
| { | |
| int need_count = 0; | |
| if (btv->users) | |
| need_count++; | |
| if (need_count) { | |
| /* start field counter */ | |
| btor(BT848_INT_VSYNC,BT848_INT_MASK); | |
| } else { | |
| /* stop field counter */ | |
| btand(~BT848_INT_VSYNC,BT848_INT_MASK); | |
| btv->field_count = 0; | |
| } | |
| } | |
| static const struct bttv_format* | |
| format_by_fourcc(int fourcc) | |
| { | |
| unsigned int i; | |
| for (i = 0; i < FORMATS; i++) { | |
| if (-1 == formats[i].fourcc) | |
| continue; | |
| if (formats[i].fourcc == fourcc) | |
| return formats+i; | |
| } | |
| return NULL; | |
| } | |
| /* ----------------------------------------------------------------------- */ | |
| /* misc helpers */ | |
| static int | |
| bttv_switch_overlay(struct bttv *btv, struct bttv_fh *fh, | |
| struct bttv_buffer *new) | |
| { | |
| struct bttv_buffer *old; | |
| unsigned long flags; | |
| dprintk("switch_overlay: enter [new=%p]\n", new); | |
| if (new) | |
| new->vb.state = VIDEOBUF_DONE; | |
| spin_lock_irqsave(&btv->s_lock,flags); | |
| old = btv->screen; | |
| btv->screen = new; | |
| btv->loop_irq |= 1; | |
| bttv_set_dma(btv, 0x03); | |
| spin_unlock_irqrestore(&btv->s_lock,flags); | |
| if (NULL != old) { | |
| dprintk("switch_overlay: old=%p state is %d\n", | |
| old, old->vb.state); | |
| bttv_dma_free(&fh->cap,btv, old); | |
| kfree(old); | |
| } | |
| if (NULL == new) | |
| free_btres_lock(btv,fh,RESOURCE_OVERLAY); | |
| dprintk("switch_overlay: done\n"); | |
| return 0; | |
| } | |
| /* ----------------------------------------------------------------------- */ | |
| /* video4linux (1) interface */ | |
| static int bttv_prepare_buffer(struct videobuf_queue *q,struct bttv *btv, | |
| struct bttv_buffer *buf, | |
| const struct bttv_format *fmt, | |
| unsigned int width, unsigned int height, | |
| enum v4l2_field field) | |
| { | |
| struct bttv_fh *fh = q->priv_data; | |
| int redo_dma_risc = 0; | |
| struct bttv_crop c; | |
| int norm; | |
| int rc; | |
| /* check settings */ | |
| if (NULL == fmt) | |
| return -EINVAL; | |
| if (fmt->btformat == BT848_COLOR_FMT_RAW) { | |
| width = RAW_BPL; | |
| height = RAW_LINES*2; | |
| if (width*height > buf->vb.bsize) | |
| return -EINVAL; | |
| buf->vb.size = buf->vb.bsize; | |
| /* Make sure tvnorm and vbi_end remain consistent | |
| until we're done. */ | |
| norm = btv->tvnorm; | |
| /* In this mode capturing always starts at defrect.top | |
| (default VDELAY), ignoring cropping parameters. */ | |
| if (btv->vbi_end > bttv_tvnorms[norm].cropcap.defrect.top) { | |
| return -EINVAL; | |
| } | |
| c.rect = bttv_tvnorms[norm].cropcap.defrect; | |
| } else { | |
| norm = btv->tvnorm; | |
| c = btv->crop[!!fh->do_crop]; | |
| if (width < c.min_scaled_width || | |
| width > c.max_scaled_width || | |
| height < c.min_scaled_height) | |
| return -EINVAL; | |
| switch (field) { | |
| case V4L2_FIELD_TOP: | |
| case V4L2_FIELD_BOTTOM: | |
| case V4L2_FIELD_ALTERNATE: | |
| /* btv->crop counts frame lines. Max. scale | |
| factor is 16:1 for frames, 8:1 for fields. */ | |
| if (height * 2 > c.max_scaled_height) | |
| return -EINVAL; | |
| break; | |
| default: | |
| if (height > c.max_scaled_height) | |
| return -EINVAL; | |
| break; | |
| } | |
| buf->vb.size = (width * height * fmt->depth) >> 3; | |
| if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size) | |
| return -EINVAL; | |
| } | |
| /* alloc + fill struct bttv_buffer (if changed) */ | |
| if (buf->vb.width != width || buf->vb.height != height || | |
| buf->vb.field != field || | |
| buf->tvnorm != norm || buf->fmt != fmt || | |
| buf->crop.top != c.rect.top || | |
| buf->crop.left != c.rect.left || | |
| buf->crop.width != c.rect.width || | |
| buf->crop.height != c.rect.height) { | |
| buf->vb.width = width; | |
| buf->vb.height = height; | |
| buf->vb.field = field; | |
| buf->tvnorm = norm; | |
| buf->fmt = fmt; | |
| buf->crop = c.rect; | |
| redo_dma_risc = 1; | |
| } | |
| /* alloc risc memory */ | |
| if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { | |
| redo_dma_risc = 1; | |
| if (0 != (rc = videobuf_iolock(q,&buf->vb,&btv->fbuf))) | |
| goto fail; | |
| } | |
| if (redo_dma_risc) | |
| if (0 != (rc = bttv_buffer_risc(btv,buf))) | |
| goto fail; | |
| buf->vb.state = VIDEOBUF_PREPARED; | |
| return 0; | |
| fail: | |
| bttv_dma_free(q,btv,buf); | |
| return rc; | |
| } | |
| static int | |
| buffer_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size) | |
| { | |
| struct bttv_fh *fh = q->priv_data; | |
| *size = fh->fmt->depth*fh->width*fh->height >> 3; | |
| if (0 == *count) | |
| *count = gbuffers; | |
| if (*size * *count > gbuffers * gbufsize) | |
| *count = (gbuffers * gbufsize) / *size; | |
| return 0; | |
| } | |
| static int | |
| buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, | |
| enum v4l2_field field) | |
| { | |
| struct bttv_buffer *buf = container_of(vb,struct bttv_buffer,vb); | |
| struct bttv_fh *fh = q->priv_data; | |
| return bttv_prepare_buffer(q,fh->btv, buf, fh->fmt, | |
| fh->width, fh->height, field); | |
| } | |
| static void | |
| buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) | |
| { | |
| struct bttv_buffer *buf = container_of(vb,struct bttv_buffer,vb); | |
| struct bttv_fh *fh = q->priv_data; | |
| struct bttv *btv = fh->btv; | |
| buf->vb.state = VIDEOBUF_QUEUED; | |
| list_add_tail(&buf->vb.queue,&btv->capture); | |
| if (!btv->curr.frame_irq) { | |
| btv->loop_irq |= 1; | |
| bttv_set_dma(btv, 0x03); | |
| } | |
| } | |
| static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb) | |
| { | |
| struct bttv_buffer *buf = container_of(vb,struct bttv_buffer,vb); | |
| struct bttv_fh *fh = q->priv_data; | |
| bttv_dma_free(q,fh->btv,buf); | |
| } | |
| static struct videobuf_queue_ops bttv_video_qops = { | |
| .buf_setup = buffer_setup, | |
| .buf_prepare = buffer_prepare, | |
| .buf_queue = buffer_queue, | |
| .buf_release = buffer_release, | |
| }; | |
| static void radio_enable(struct bttv *btv) | |
| { | |
| /* Switch to the radio tuner */ | |
| if (!btv->has_radio_tuner) { | |
| btv->has_radio_tuner = 1; | |
| bttv_call_all(btv, tuner, s_radio); | |
| btv->audio_input = TVAUDIO_INPUT_RADIO; | |
| audio_input(btv, btv->audio_input); | |
| } | |
| } | |
| static int bttv_s_std(struct file *file, void *priv, v4l2_std_id id) | |
| { | |
| struct bttv_fh *fh = priv; | |
| struct bttv *btv = fh->btv; | |
| unsigned int i; | |
| for (i = 0; i < BTTV_TVNORMS; i++) | |
| if (id & bttv_tvnorms[i].v4l2_id) | |
| break; | |
| if (i == BTTV_TVNORMS) | |
| return -EINVAL; | |
| btv->std = id; | |
| set_tvnorm(btv, i); | |
| return 0; | |
| } | |
| static int bttv_g_std(struct file *file, void *priv, v4l2_std_id *id) | |
| { | |
| struct bttv_fh *fh = priv; | |
| struct bttv *btv = fh->btv; | |
| *id = btv->std; | |
| return 0; | |
| } | |
| static int bttv_querystd(struct file *file, void *f, v4l2_std_id *id) | |
| { | |
| struct bttv_fh *fh = f; | |
| struct bttv *btv = fh->btv; | |
| if (btread(BT848_DSTATUS) & BT848_DSTATUS_NUML) | |
| *id &= V4L2_STD_625_50; | |
| else | |
| *id &= V4L2_STD_525_60; | |
| return 0; | |
| } | |
| static int bttv_enum_input(struct file *file, void *priv, | |
| struct v4l2_input *i) | |
| { | |
| struct bttv_fh *fh = priv; | |
| struct bttv *btv = fh->btv; | |
| if (i->index >= bttv_tvcards[btv->c.type].video_inputs) | |
| return -EINVAL; | |
| i->type = V4L2_INPUT_TYPE_CAMERA; | |
| i->audioset = 0; | |
| if (btv->tuner_type != TUNER_ABSENT && i->index == 0) { | |
| sprintf(i->name, "Television"); | |
| i->type = V4L2_INPUT_TYPE_TUNER; | |
| i->tuner = 0; | |
| } else if (i->index == btv->svhs) { | |
| sprintf(i->name, "S-Video"); | |
| } else { | |
| sprintf(i->name, "Composite%d", i->index); | |
| } | |
| if (i->index == btv->input) { | |
| __u32 dstatus = btread(BT848_DSTATUS); | |
| if (0 == (dstatus & BT848_DSTATUS_PRES)) | |
| i->status |= V4L2_IN_ST_NO_SIGNAL; | |
| if (0 == (dstatus & BT848_DSTATUS_HLOC)) | |
| i->status |= V4L2_IN_ST_NO_H_LOCK; | |
| } | |
| i->std = BTTV_NORMS; | |
| return 0; | |
| } | |
| static int bttv_g_input(struct file *file, void *priv, unsigned int *i) | |
| { | |
| struct bttv_fh *fh = priv; | |
| struct bttv *btv = fh->btv; | |
| *i = btv->input; | |
| return 0; | |
| } | |
| static int bttv_s_input(struct file *file, void *priv, unsigned int i) | |
| { | |
| struct bttv_fh *fh = priv; | |
| struct bttv *btv = fh->btv; | |
| if (i >= bttv_tvcards[btv->c.type].video_inputs) | |
| return -EINVAL; | |
| set_input(btv, i, btv->tvnorm); | |
| return 0; | |
| } | |
| static int bttv_s_tuner(struct file *file, void *priv, | |
| const struct v4l2_tuner *t) | |
| { | |
| struct bttv_fh *fh = priv; | |
| struct bttv *btv = fh->btv; | |
| if (t->index) | |
| return -EINVAL; | |
| bttv_call_all(btv, tuner, s_tuner, t); | |
| if (btv->audio_mode_gpio) { | |
| struct v4l2_tuner copy = *t; | |
| btv->audio_mode_gpio(btv, ©, 1); | |
| } | |
| return 0; | |
| } | |
| static int bttv_g_frequency(struct file *file, void *priv, | |
| struct v4l2_frequency *f) | |
| { | |
| struct bttv_fh *fh = priv; | |
| struct bttv *btv = fh->btv; | |
| if (f->tuner) | |
| return -EINVAL; | |
| if (f->type == V4L2_TUNER_RADIO) | |
| radio_enable(btv); | |
| f->frequency = f->type == V4L2_TUNER_RADIO ? | |
| btv->radio_freq : btv->tv_freq; | |
| return 0; | |
| } | |
| static void bttv_set_frequency(struct bttv *btv, const struct v4l2_frequency *f) | |
| { | |
| struct v4l2_frequency new_freq = *f; | |
| bttv_call_all(btv, tuner, s_frequency, f); | |
| /* s_frequency may clamp the frequency, so get the actual | |
| frequency before assigning radio/tv_freq. */ | |
| bttv_call_all(btv, tuner, g_frequency, &new_freq); | |
| if (new_freq.type == V4L2_TUNER_RADIO) { | |
| radio_enable(btv); | |
| btv->radio_freq = new_freq.frequency; | |
| if (btv->has_tea575x) { | |
| btv->tea.freq = btv->radio_freq; | |
| snd_tea575x_set_freq(&btv->tea); | |
| } | |
| } else { | |
| btv->tv_freq = new_freq.frequency; | |
| } | |
| } | |
| static int bttv_s_frequency(struct file *file, void *priv, | |
| const struct v4l2_frequency *f) | |
| { | |
| struct bttv_fh *fh = priv; | |
| struct bttv *btv = fh->btv; | |
| if (f->tuner) | |
| return -EINVAL; | |
| bttv_set_frequency(btv, f); | |
| return 0; | |
| } | |
| static int bttv_log_status(struct file *file, void *f) | |
| { | |
| struct video_device *vdev = video_devdata(file); | |
| struct bttv_fh *fh = f; | |
| struct bttv *btv = fh->btv; | |
| v4l2_ctrl_handler_log_status(vdev->ctrl_handler, btv->c.v4l2_dev.name); | |
| bttv_call_all(btv, core, log_status); | |
| return 0; | |
| } | |
| #ifdef CONFIG_VIDEO_ADV_DEBUG | |
| static int bttv_g_register(struct file *file, void *f, | |
| struct v4l2_dbg_register *reg) | |
| { | |
| struct bttv_fh *fh = f; | |
| struct bttv *btv = fh->btv; | |
| /* bt848 has a 12-bit register space */ | |
| reg->reg &= 0xfff; | |
| reg->val = btread(reg->reg); | |
| reg->size = 1; | |
| return 0; | |
| } | |
| static int bttv_s_register(struct file *file, void *f, | |
| const struct v4l2_dbg_register *reg) | |
| { | |
| struct bttv_fh *fh = f; | |
| struct bttv *btv = fh->btv; | |
| /* bt848 has a 12-bit register space */ | |
| btwrite(reg->val, reg->reg & 0xfff); | |
| return 0; | |
| } | |
| #endif | |
| /* Given cropping boundaries b and the scaled width and height of a | |
| single field or frame, which must not exceed hardware limits, this | |
| function adjusts the cropping parameters c. */ | |
| static void | |
| bttv_crop_adjust (struct bttv_crop * c, | |
| const struct v4l2_rect * b, | |
| __s32 width, | |
| __s32 height, | |
| enum v4l2_field field) | |
| { | |
| __s32 frame_height = height << !V4L2_FIELD_HAS_BOTH(field); | |
| __s32 max_left; | |
| __s32 max_top; | |
| if (width < c->min_scaled_width) { | |
| /* Max. hor. scale factor 16:1. */ | |
| c->rect.width = width * 16; | |
| } else if (width > c->max_scaled_width) { | |
| /* Min. hor. scale factor 1:1. */ | |
| c->rect.width = width; | |
| max_left = b->left + b->width - width; | |
| max_left = min(max_left, (__s32) MAX_HDELAY); | |
| if (c->rect.left > max_left) | |
| c->rect.left = max_left; | |
| } | |
| if (height < c->min_scaled_height) { | |
| /* Max. vert. scale factor 16:1, single fields 8:1. */ | |
| c->rect.height = height * 16; | |
| } else if (frame_height > c->max_scaled_height) { | |
| /* Min. vert. scale factor 1:1. | |
| Top and height count field lines times two. */ | |
| c->rect.height = (frame_height + 1) & ~1; | |
| max_top = b->top + b->height - c->rect.height; | |
| if (c->rect.top > max_top) | |
| c->rect.top = max_top; | |
| } | |
| bttv_crop_calc_limits(c); | |
| } | |
| /* Returns an error if scaling to a frame or single field with the given | |
| width and height is not possible with the current cropping parameters | |
| and width aligned according to width_mask. If adjust_size is TRUE the | |
| function may adjust the width and/or height instead, rounding width | |
| to (width + width_bias) & width_mask. If adjust_crop is TRUE it may | |
| also adjust the current cropping parameters to get closer to the | |
| desired image size. */ | |
| static int | |
| limit_scaled_size_lock (struct bttv_fh * fh, | |
| __s32 * width, | |
| __s32 * height, | |
| enum v4l2_field field, | |
| unsigned int width_mask, | |
| unsigned int width_bias, | |
| int adjust_size, | |
| int adjust_crop) | |
| { | |
| struct bttv *btv = fh->btv; | |
| const struct v4l2_rect *b; | |
| struct bttv_crop *c; | |
| __s32 min_width; | |
| __s32 min_height; | |
| __s32 max_width; | |
| __s32 max_height; | |
| int rc; | |
| BUG_ON((int) width_mask >= 0 || | |
| width_bias >= (unsigned int) -width_mask); | |
| /* Make sure tvnorm, vbi_end and the current cropping parameters | |
| remain consistent until we're done. */ | |
| b = &bttv_tvnorms[btv->tvnorm].cropcap.bounds; | |
| /* Do crop - use current, don't - use default parameters. */ | |
| c = &btv->crop[!!fh->do_crop]; | |
| if (fh->do_crop | |
| && adjust_size | |
| && adjust_crop | |
| && !locked_btres(btv, VIDEO_RESOURCES)) { | |
| min_width = 48; | |
| min_height = 32; | |
| /* We cannot scale up. When the scaled image is larger | |
| than crop.rect we adjust the crop.rect as required | |
| by the V4L2 spec, hence cropcap.bounds are our limit. */ | |
| max_width = min_t(unsigned int, b->width, MAX_HACTIVE); | |
| max_height = b->height; | |
| /* We cannot capture the same line as video and VBI data. | |
| Note btv->vbi_end is really a minimum, see | |
| bttv_vbi_try_fmt(). */ | |
| if (btv->vbi_end > b->top) { | |
| max_height -= btv->vbi_end - b->top; | |
| rc = -EBUSY; | |
| if (min_height > max_height) | |
| goto fail; | |
| } | |
| } else { | |
| rc = -EBUSY; | |
| if (btv->vbi_end > c->rect.top) | |
| goto fail; | |
| min_width = c->min_scaled_width; | |
| min_height = c->min_scaled_height; | |
| max_width = c->max_scaled_width; | |
| max_height = c->max_scaled_height; | |
| adjust_crop = 0; | |
| } | |
| min_width = (min_width - width_mask - 1) & width_mask; | |
| max_width = max_width & width_mask; | |
| /* Max. scale factor is 16:1 for frames, 8:1 for fields. */ | |
| min_height = min_height; | |
| /* Min. scale factor is 1:1. */ | |
| max_height >>= !V4L2_FIELD_HAS_BOTH(field); | |
| if (adjust_size) { | |
| *width = clamp(*width, min_width, max_width); | |
| *height = clamp(*height, min_height, max_height); | |
| /* Round after clamping to avoid overflow. */ | |
| *width = (*width + width_bias) & width_mask; | |
| if (adjust_crop) { | |
| bttv_crop_adjust(c, b, *width, *height, field); | |
| if (btv->vbi_end > c->rect.top) { | |
| /* Move the crop window out of the way. */ | |
| c->rect.top = btv->vbi_end; | |
| } | |
| } | |
| } else { | |
| rc = -EINVAL; | |
| if (*width < min_width || | |
| *height < min_height || | |
| *width > max_width || | |
| *height > max_height || | |
| 0 != (*width & ~width_mask)) | |
| goto fail; | |
| } | |
| rc = 0; /* success */ | |
| fail: | |
| return rc; | |
| } | |
| /* Returns an error if the given overlay window dimensions are not | |
| possible with the current cropping parameters. If adjust_size is | |
| TRUE the function may adjust the window width and/or height | |
| instead, however it always rounds the horizontal position and | |
| width as btcx_align() does. If adjust_crop is TRUE the function | |
| may also adjust the current cropping parameters to get closer | |
| to the desired window size. */ | |
| static int | |
| verify_window_lock(struct bttv_fh *fh, struct v4l2_window *win, | |
| int adjust_size, int adjust_crop) | |
| { | |
| enum v4l2_field field; | |
| unsigned int width_mask; | |
| int rc; | |
| if (win->w.width < 48) | |
| win->w.width = 48; | |
| if (win->w.height < 32) | |
| win->w.height = 32; | |
| if (win->clipcount > 2048) | |
| win->clipcount = 2048; | |
| win->chromakey = 0; | |
| win->global_alpha = 0; | |
| field = win->field; | |
| switch (field) { | |
| case V4L2_FIELD_TOP: | |
| case V4L2_FIELD_BOTTOM: | |
| case V4L2_FIELD_INTERLACED: | |
| break; | |
| default: | |
| field = V4L2_FIELD_ANY; | |
| break; | |
| } | |
| if (V4L2_FIELD_ANY == field) { | |
| __s32 height2; | |
| height2 = fh->btv->crop[!!fh->do_crop].rect.height >> 1; | |
| field = (win->w.height > height2) | |
| ? V4L2_FIELD_INTERLACED | |
| : V4L2_FIELD_TOP; | |
| } | |
| win->field = field; | |
| if (NULL == fh->ovfmt) | |
| return -EINVAL; | |
| /* 4-byte alignment. */ | |
| width_mask = ~0; | |
| switch (fh->ovfmt->depth) { | |
| case 8: | |
| case 24: | |
| width_mask = ~3; | |
| break; | |
| case 16: | |
| width_mask = ~1; | |
| break; | |
| case 32: | |
| break; | |
| default: | |
| BUG(); | |
| } | |
| win->w.width -= win->w.left & ~width_mask; | |
| win->w.left = (win->w.left - width_mask - 1) & width_mask; | |
| rc = limit_scaled_size_lock(fh, &win->w.width, &win->w.height, | |
| field, width_mask, | |
| /* width_bias: round down */ 0, | |
| adjust_size, adjust_crop); | |
| if (0 != rc) | |
| return rc; | |
| return 0; | |
| } | |
| static int setup_window_lock(struct bttv_fh *fh, struct bttv *btv, | |
| struct v4l2_window *win, int fixup) | |
| { | |
| struct v4l2_clip *clips = NULL; | |
| int n,size,retval = 0; | |
| if (NULL == fh->ovfmt) | |
| return -EINVAL; | |
| if (!(fh->ovfmt->flags & FORMAT_FLAGS_PACKED)) | |
| return -EINVAL; | |
| retval = verify_window_lock(fh, win, | |
| /* adjust_size */ fixup, | |
| /* adjust_crop */ fixup); | |
| if (0 != retval) | |
| return retval; | |
| /* copy clips -- luckily v4l1 + v4l2 are binary | |
| compatible here ...*/ | |
| n = win->clipcount; | |
| size = sizeof(*clips)*(n+4); | |
| clips = kmalloc(size,GFP_KERNEL); | |
| if (NULL == clips) | |
| return -ENOMEM; | |
| if (n > 0) { | |
| if (copy_from_user(clips,win->clips,sizeof(struct v4l2_clip)*n)) { | |
| kfree(clips); | |
| return -EFAULT; | |
| } | |
| } | |
| /* clip against screen */ | |
| if (NULL != btv->fbuf.base) | |
| n = btcx_screen_clips(btv->fbuf.fmt.width, btv->fbuf.fmt.height, | |
| &win->w, clips, n); | |
| btcx_sort_clips(clips,n); | |
| /* 4-byte alignments */ | |
| switch (fh->ovfmt->depth) { | |
| case 8: | |
| case 24: | |
| btcx_align(&win->w, clips, n, 3); | |
| break; | |
| case 16: | |
| btcx_align(&win->w, clips, n, 1); | |
| break; | |
| case 32: | |
| /* no alignment fixups needed */ | |
| break; | |
| default: | |
| BUG(); | |
| } | |
| kfree(fh->ov.clips); | |
| fh->ov.clips = clips; | |
| fh->ov.nclips = n; | |
| fh->ov.w = win->w; | |
| fh->ov.field = win->field; | |
| fh->ov.setup_ok = 1; | |
| btv->init.ov.w.width = win->w.width; | |
| btv->init.ov.w.height = win->w.height; | |
| btv->init.ov.field = win->field; | |
| /* update overlay if needed */ | |
| retval = 0; | |
| if (check_btres(fh, RESOURCE_OVERLAY)) { | |
| struct bttv_buffer *new; | |
| new = videobuf_sg_alloc(sizeof(*new)); | |
| new->crop = btv->crop[!!fh->do_crop].rect; | |
| bttv_overlay_risc(btv, &fh->ov, fh->ovfmt, new); | |
| retval = bttv_switch_overlay(btv,fh,new); | |
| } | |
| return retval; | |
| } | |
| /* ----------------------------------------------------------------------- */ | |
| static struct videobuf_queue* bttv_queue(struct bttv_fh *fh) | |
| { | |
| struct videobuf_queue* q = NULL; | |
| switch (fh->type) { | |
| case V4L2_BUF_TYPE_VIDEO_CAPTURE: | |
| q = &fh->cap; | |
| break; | |
| case V4L2_BUF_TYPE_VBI_CAPTURE: | |
| q = &fh->vbi; | |
| break; | |
| default: | |
| BUG(); | |
| } | |
| return q; | |
| } | |
| static int bttv_resource(struct bttv_fh *fh) | |
| { | |
| int res = 0; | |
| switch (fh->type) { | |
| case V4L2_BUF_TYPE_VIDEO_CAPTURE: | |
| res = RESOURCE_VIDEO_STREAM; | |
| break; | |
| case V4L2_BUF_TYPE_VBI_CAPTURE: | |
| res = RESOURCE_VBI; | |
| break; | |
| default: | |
| BUG(); | |
| } | |
| return res; | |
| } | |
| static int bttv_switch_type(struct bttv_fh *fh, enum v4l2_buf_type type) | |
| { | |
| struct videobuf_queue *q = bttv_queue(fh); | |
| int res = bttv_resource(fh); | |
| if (check_btres(fh,res)) | |
| return -EBUSY; | |
| if (videobuf_queue_is_busy(q)) | |
| return -EBUSY; | |
| fh->type = type; | |
| return 0; | |
| } | |
| static void | |
| pix_format_set_size (struct v4l2_pix_format * f, | |
| const struct bttv_format * fmt, | |
| unsigned int width, | |
| unsigned int height) | |
| { | |
| f->width = width; | |
| f->height = height; | |
| if (fmt->flags & FORMAT_FLAGS_PLANAR) { | |
| f->bytesperline = width; /* Y plane */ | |
| f->sizeimage = (width * height * fmt->depth) >> 3; | |
| } else { | |
| f->bytesperline = (width * fmt->depth) >> 3; | |
| f->sizeimage = height * f->bytesperline; | |
| } | |
| } | |
| static int bttv_g_fmt_vid_cap(struct file *file, void *priv, | |
| struct v4l2_format *f) | |
| { | |
| struct bttv_fh *fh = priv; | |
| pix_format_set_size(&f->fmt.pix, fh->fmt, | |
| fh->width, fh->height); | |
| f->fmt.pix.field = fh->cap.field; | |
| f->fmt.pix.pixelformat = fh->fmt->fourcc; | |
| f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; | |
| return 0; | |
| } | |
| static int bttv_g_fmt_vid_overlay(struct file *file, void *priv, | |
| struct v4l2_format *f) | |
| { | |
| struct bttv_fh *fh = priv; | |
| f->fmt.win.w = fh->ov.w; | |
| f->fmt.win.field = fh->ov.field; | |
| return 0; | |
| } | |
| static void bttv_get_width_mask_vid_cap(const struct bttv_format *fmt, | |
| unsigned int *width_mask, | |
| unsigned int *width_bias) | |
| { | |
| if (fmt->flags & FORMAT_FLAGS_PLANAR) { | |
| *width_mask = ~15; /* width must be a multiple of 16 pixels */ | |
| *width_bias = 8; /* nearest */ | |
| } else { | |
| *width_mask = ~3; /* width must be a multiple of 4 pixels */ | |
| *width_bias = 2; /* nearest */ | |
| } | |
| } | |
| static int bttv_try_fmt_vid_cap(struct file *file, void *priv, | |
| struct v4l2_format *f) | |
| { | |
| const struct bttv_format *fmt; | |
| struct bttv_fh *fh = priv; | |
| struct bttv *btv = fh->btv; | |
| enum v4l2_field field; | |
| __s32 width, height; | |
| __s32 height2; | |
| unsigned int width_mask, width_bias; | |
| int rc; | |
| fmt = format_by_fourcc(f->fmt.pix.pixelformat); | |
| if (NULL == fmt) | |
| return -EINVAL; | |
| field = f->fmt.pix.field; | |
| switch (field) { | |
| case V4L2_FIELD_TOP: | |
| case V4L2_FIELD_BOTTOM: | |
| case V4L2_FIELD_ALTERNATE: | |
| case V4L2_FIELD_INTERLACED: | |
| break; | |
| case V4L2_FIELD_SEQ_BT: | |
| case V4L2_FIELD_SEQ_TB: | |
| if (!(fmt->flags & FORMAT_FLAGS_PLANAR)) { | |
| field = V4L2_FIELD_SEQ_TB; | |
| break; | |
| } | |
| /* fall through */ | |
| default: /* FIELD_ANY case */ | |
| height2 = btv->crop[!!fh->do_crop].rect.height >> 1; | |
| field = (f->fmt.pix.height > height2) | |
| ? V4L2_FIELD_INTERLACED | |
| : V4L2_FIELD_BOTTOM; | |
| break; | |
| } | |
| width = f->fmt.pix.width; | |
| height = f->fmt.pix.height; | |
| bttv_get_width_mask_vid_cap(fmt, &width_mask, &width_bias); | |
| rc = limit_scaled_size_lock(fh, &width, &height, field, | |
| width_mask, width_bias, | |
| /* adjust_size */ 1, | |
| /* adjust_crop */ 0); | |
| if (0 != rc) | |
| return rc; | |
| /* update data for the application */ | |
| f->fmt.pix.field = field; | |
| pix_format_set_size(&f->fmt.pix, fmt, width, height); | |
| f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; | |
| return 0; | |
| } | |
| static int bttv_try_fmt_vid_overlay(struct file *file, void *priv, | |
| struct v4l2_format *f) | |
| { | |
| struct bttv_fh *fh = priv; | |
| verify_window_lock(fh, &f->fmt.win, | |
| /* adjust_size */ 1, | |
| /* adjust_crop */ 0); | |
| return 0; | |
| } | |
| static int bttv_s_fmt_vid_cap(struct file *file, void *priv, | |
| struct v4l2_format *f) | |
| { | |
| int retval; | |
| const struct bttv_format *fmt; | |
| struct bttv_fh *fh = priv; | |
| struct bttv *btv = fh->btv; | |
| __s32 width, height; | |
| unsigned int width_mask, width_bias; | |
| enum v4l2_field field; | |
| retval = bttv_switch_type(fh, f->type); | |
| if (0 != retval) | |
| return retval; | |
| retval = bttv_try_fmt_vid_cap(file, priv, f); | |
| if (0 != retval) | |
| return retval; | |
| width = f->fmt.pix.width; | |
| height = f->fmt.pix.height; | |
| field = f->fmt.pix.field; | |
| fmt = format_by_fourcc(f->fmt.pix.pixelformat); | |
| bttv_get_width_mask_vid_cap(fmt, &width_mask, &width_bias); | |
| retval = limit_scaled_size_lock(fh, &width, &height, f->fmt.pix.field, | |
| width_mask, width_bias, | |
| /* adjust_size */ 1, | |
| /* adjust_crop */ 1); | |
| if (0 != retval) | |
| return retval; | |
| f->fmt.pix.field = field; | |
| /* update our state informations */ | |
| fh->fmt = fmt; | |
| fh->cap.field = f->fmt.pix.field; | |
| fh->cap.last = V4L2_FIELD_NONE; | |
| fh->width = f->fmt.pix.width; | |
| fh->height = f->fmt.pix.height; | |
| btv->init.fmt = fmt; | |
| btv->init.width = f->fmt.pix.width; | |
| btv->init.height = f->fmt.pix.height; | |
| return 0; | |
| } | |
| static int bttv_s_fmt_vid_overlay(struct file *file, void *priv, | |
| struct v4l2_format *f) | |
| { | |
| struct bttv_fh *fh = priv; | |
| struct bttv *btv = fh->btv; | |
| if (no_overlay > 0) { | |
| pr_err("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); | |
| return -EINVAL; | |
| } | |
| return setup_window_lock(fh, btv, &f->fmt.win, 1); | |
| } | |
| static int bttv_querycap(struct file *file, void *priv, | |
| struct v4l2_capability *cap) | |
| { | |
| struct video_device *vdev = video_devdata(file); | |
| struct bttv_fh *fh = priv; | |
| struct bttv *btv = fh->btv; | |
| if (0 == v4l2) | |
| return -EINVAL; | |
| strlcpy(cap->driver, "bttv", sizeof(cap->driver)); | |
| strlcpy(cap->card, btv->video_dev.name, sizeof(cap->card)); | |
| snprintf(cap->bus_info, sizeof(cap->bus_info), | |
| "PCI:%s", pci_name(btv->c.pci)); | |
| cap->capabilities = | |
| V4L2_CAP_VIDEO_CAPTURE | | |
| V4L2_CAP_READWRITE | | |
| V4L2_CAP_STREAMING | | |
| V4L2_CAP_DEVICE_CAPS; | |
| if (no_overlay <= 0) | |
| cap->capabilities |= V4L2_CAP_VIDEO_OVERLAY; | |
| if (video_is_registered(&btv->vbi_dev)) | |
| cap->capabilities |= V4L2_CAP_VBI_CAPTURE; | |
| if (video_is_registered(&btv->radio_dev)) | |
| cap->capabilities |= V4L2_CAP_RADIO; | |
| /* | |
| * No need to lock here: those vars are initialized during board | |
| * probe and remains untouched during the rest of the driver lifecycle | |
| */ | |
| if (btv->has_saa6588) | |
| cap->capabilities |= V4L2_CAP_RDS_CAPTURE; | |
| if (btv->tuner_type != TUNER_ABSENT) | |
| cap->capabilities |= V4L2_CAP_TUNER; | |
| if (vdev->vfl_type == VFL_TYPE_GRABBER) | |
| cap->device_caps = cap->capabilities & | |
| (V4L2_CAP_VIDEO_CAPTURE | | |
| V4L2_CAP_READWRITE | | |
| V4L2_CAP_STREAMING | | |
| V4L2_CAP_VIDEO_OVERLAY | | |
| V4L2_CAP_TUNER); | |
| else if (vdev->vfl_type == VFL_TYPE_VBI) | |
| cap->device_caps = cap->capabilities & | |
| (V4L2_CAP_VBI_CAPTURE | | |
| V4L2_CAP_READWRITE | | |
| V4L2_CAP_STREAMING | | |
| V4L2_CAP_TUNER); | |
| else { | |
| cap->device_caps = V4L2_CAP_RADIO | V4L2_CAP_TUNER; | |
| if (btv->has_saa6588) | |
| cap->device_caps |= V4L2_CAP_READWRITE | | |
| V4L2_CAP_RDS_CAPTURE; | |
| if (btv->has_tea575x) | |
| cap->device_caps |= V4L2_CAP_HW_FREQ_SEEK; | |
| } | |
| return 0; | |
| } | |
| static int bttv_enum_fmt_cap_ovr(struct v4l2_fmtdesc *f) | |
| { | |
| int index = -1, i; | |
| for (i = 0; i < FORMATS; i++) { | |
| if (formats[i].fourcc != -1) | |
| index++; | |
| if ((unsigned int)index == f->index) | |
| break; | |
| } | |
| if (FORMATS == i) | |
| return -EINVAL; | |
| f->pixelformat = formats[i].fourcc; | |
| strlcpy(f->description, formats[i].name, sizeof(f->description)); | |
| return i; | |
| } | |
| static int bttv_enum_fmt_vid_cap(struct file *file, void *priv, | |
| struct v4l2_fmtdesc *f) | |
| { | |
| int rc = bttv_enum_fmt_cap_ovr(f); | |
| if (rc < 0) | |
| return rc; | |
| return 0; | |
| } | |
| static int bttv_enum_fmt_vid_overlay(struct file *file, void *priv, | |
| struct v4l2_fmtdesc *f) | |
| { | |
| int rc; | |
| if (no_overlay > 0) { | |
| pr_err("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); | |
| return -EINVAL; | |
| } | |
| rc = bttv_enum_fmt_cap_ovr(f); | |
| if (rc < 0) | |
| return rc; | |
| if (!(formats[rc].flags & FORMAT_FLAGS_PACKED)) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| static int bttv_g_fbuf(struct file *file, void *f, | |
| struct v4l2_framebuffer *fb) | |
| { | |
| struct bttv_fh *fh = f; | |
| struct bttv *btv = fh->btv; | |
| *fb = btv->fbuf; | |
| fb->capability = V4L2_FBUF_CAP_LIST_CLIPPING; | |
| fb->flags = V4L2_FBUF_FLAG_PRIMARY; | |
| if (fh->ovfmt) | |
| fb->fmt.pixelformat = fh->ovfmt->fourcc; | |
| return 0; | |
| } | |
| static int bttv_overlay(struct file *file, void *f, unsigned int on) | |
| { | |
| struct bttv_fh *fh = f; | |
| struct bttv *btv = fh->btv; | |
| struct bttv_buffer *new; | |
| int retval = 0; | |
| if (on) { | |
| /* verify args */ | |
| if (unlikely(!btv->fbuf.base)) { | |
| return -EINVAL; | |
| } | |
| if (unlikely(!fh->ov.setup_ok)) { | |
| dprintk("%d: overlay: !setup_ok\n", btv->c.nr); | |
| retval = -EINVAL; | |
| } | |
| if (retval) | |
| return retval; | |
| } | |
| if (!check_alloc_btres_lock(btv, fh, RESOURCE_OVERLAY)) | |
| return -EBUSY; | |
| if (on) { | |
| fh->ov.tvnorm = btv->tvnorm; | |
| new = videobuf_sg_alloc(sizeof(*new)); | |
| new->crop = btv->crop[!!fh->do_crop].rect; | |
| bttv_overlay_risc(btv, &fh->ov, fh->ovfmt, new); | |
| } else { | |
| new = NULL; | |
| } | |
| /* switch over */ | |
| retval = bttv_switch_overlay(btv, fh, new); | |
| return retval; | |
| } | |
| static int bttv_s_fbuf(struct file *file, void *f, | |
| const struct v4l2_framebuffer *fb) | |
| { | |
| struct bttv_fh *fh = f; | |
| struct bttv *btv = fh->btv; | |
| const struct bttv_format *fmt; | |
| int retval; | |
| if (!capable(CAP_SYS_ADMIN) && | |
| !capable(CAP_SYS_RAWIO)) | |
| return -EPERM; | |
| /* check args */ | |
| fmt = format_by_fourcc(fb->fmt.pixelformat); | |
| if (NULL == fmt) | |
| return -EINVAL; | |
| if (0 == (fmt->flags & FORMAT_FLAGS_PACKED)) | |
| return -EINVAL; | |
| retval = -EINVAL; | |
| if (fb->flags & V4L2_FBUF_FLAG_OVERLAY) { | |
| __s32 width = fb->fmt.width; | |
| __s32 height = fb->fmt.height; | |
| retval = limit_scaled_size_lock(fh, &width, &height, | |
| V4L2_FIELD_INTERLACED, | |
| /* width_mask */ ~3, | |
| /* width_bias */ 2, | |
| /* adjust_size */ 0, | |
| /* adjust_crop */ 0); | |
| if (0 != retval) | |
| return retval; | |
| } | |
| /* ok, accept it */ | |
| btv->fbuf.base = fb->base; | |
| btv->fbuf.fmt.width = fb->fmt.width; | |
| btv->fbuf.fmt.height = fb->fmt.height; | |
| if (0 != fb->fmt.bytesperline) | |
| btv->fbuf.fmt.bytesperline = fb->fmt.bytesperline; | |
| else | |
| btv->fbuf.fmt.bytesperline = btv->fbuf.fmt.width*fmt->depth/8; | |
| retval = 0; | |
| fh->ovfmt = fmt; | |
| btv->init.ovfmt = fmt; | |
| if (fb->flags & V4L2_FBUF_FLAG_OVERLAY) { | |
| fh->ov.w.left = 0; | |
| fh->ov.w.top = 0; | |
| fh->ov.w.width = fb->fmt.width; | |
| fh->ov.w.height = fb->fmt.height; | |
| btv->init.ov.w.width = fb->fmt.width; | |
| btv->init.ov.w.height = fb->fmt.height; | |
| kfree(fh->ov.clips); | |
| fh->ov.clips = NULL; | |
| fh->ov.nclips = 0; | |
| if (check_btres(fh, RESOURCE_OVERLAY)) { | |
| struct bttv_buffer *new; | |
| new = videobuf_sg_alloc(sizeof(*new)); | |
| new->crop = btv->crop[!!fh->do_crop].rect; | |
| bttv_overlay_risc(btv, &fh->ov, fh->ovfmt, new); | |
| retval = bttv_switch_overlay(btv, fh, new); | |
| } | |
| } | |
| return retval; | |
| } | |
| static int bttv_reqbufs(struct file *file, void *priv, | |
| struct v4l2_requestbuffers *p) | |
| { | |
| struct bttv_fh *fh = priv; | |
| return videobuf_reqbufs(bttv_queue(fh), p); | |
| } | |
| static int bttv_querybuf(struct file *file, void *priv, | |
| struct v4l2_buffer *b) | |
| { | |
| struct bttv_fh *fh = priv; | |
| return videobuf_querybuf(bttv_queue(fh), b); | |
| } | |
| static int bttv_qbuf(struct file *file, void *priv, struct v4l2_buffer *b) | |
| { | |
| struct bttv_fh *fh = priv; | |
| struct bttv *btv = fh->btv; | |
| int res = bttv_resource(fh); | |
| if (!check_alloc_btres_lock(btv, fh, res)) | |
| return -EBUSY; | |
| return videobuf_qbuf(bttv_queue(fh), b); | |
| } | |
| static int bttv_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) | |
| { | |
| struct bttv_fh *fh = priv; | |
| return videobuf_dqbuf(bttv_queue(fh), b, | |
| file->f_flags & O_NONBLOCK); | |
| } | |
| static int bttv_streamon(struct file *file, void *priv, | |
| enum v4l2_buf_type type) | |
| { | |
| struct bttv_fh *fh = priv; | |
| struct bttv *btv = fh->btv; | |
| int res = bttv_resource(fh); | |
| if (!check_alloc_btres_lock(btv, fh, res)) | |
| return -EBUSY; | |
| return videobuf_streamon(bttv_queue(fh)); | |
| } | |
| static int bttv_streamoff(struct file *file, void *priv, | |
| enum v4l2_buf_type type) | |
| { | |
| struct bttv_fh *fh = priv; | |
| struct bttv *btv = fh->btv; | |
| int retval; | |
| int res = bttv_resource(fh); | |
| retval = videobuf_streamoff(bttv_queue(fh)); | |
| if (retval < 0) | |
| return retval; | |
| free_btres_lock(btv, fh, res); | |
| return 0; | |
| } | |
| static int bttv_g_parm(struct file *file, void *f, | |
| struct v4l2_streamparm *parm) | |
| { | |
| struct bttv_fh *fh = f; | |
| struct bttv *btv = fh->btv; | |
| if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) | |
| return -EINVAL; | |
| parm->parm.capture.readbuffers = gbuffers; | |
| v4l2_video_std_frame_period(bttv_tvnorms[btv->tvnorm].v4l2_id, | |
| &parm->parm.capture.timeperframe); | |
| return 0; | |
| } | |
| static int bttv_g_tuner(struct file *file, void *priv, | |
| struct v4l2_tuner *t) | |
| { | |
| struct bttv_fh *fh = priv; | |
| struct bttv *btv = fh->btv; | |
| if (0 != t->index) | |
| return -EINVAL; | |
| t->rxsubchans = V4L2_TUNER_SUB_MONO; | |
| t->capability = V4L2_TUNER_CAP_NORM; | |
| bttv_call_all(btv, tuner, g_tuner, t); | |
| strcpy(t->name, "Television"); | |
| t->type = V4L2_TUNER_ANALOG_TV; | |
| if (btread(BT848_DSTATUS)&BT848_DSTATUS_HLOC) | |
| t->signal = 0xffff; | |
| if (btv->audio_mode_gpio) | |
| btv->audio_mode_gpio(btv, t, 0); | |
| return 0; | |
| } | |
| static int bttv_cropcap(struct file *file, void *priv, | |
| struct v4l2_cropcap *cap) | |
| { | |
| struct bttv_fh *fh = priv; | |
| struct bttv *btv = fh->btv; | |
| if (cap->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && | |
| cap->type != V4L2_BUF_TYPE_VIDEO_OVERLAY) | |
| return -EINVAL; | |
| /* defrect and bounds are set via g_selection */ | |
| cap->pixelaspect = bttv_tvnorms[btv->tvnorm].cropcap.pixelaspect; | |
| return 0; | |
| } | |
| static int bttv_g_selection(struct file *file, void *f, struct v4l2_selection *sel) | |
| { | |
| struct bttv_fh *fh = f; | |
| struct bttv *btv = fh->btv; | |
| if (sel->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && | |
| sel->type != V4L2_BUF_TYPE_VIDEO_OVERLAY) | |
| return -EINVAL; | |
| switch (sel->target) { | |
| case V4L2_SEL_TGT_CROP: | |
| /* | |
| * No fh->do_crop = 1; because btv->crop[1] may be | |
| * inconsistent with fh->width or fh->height and apps | |
| * do not expect a change here. | |
| */ | |
| sel->r = btv->crop[!!fh->do_crop].rect; | |
| break; | |
| case V4L2_SEL_TGT_CROP_DEFAULT: | |
| sel->r = bttv_tvnorms[btv->tvnorm].cropcap.defrect; | |
| break; | |
| case V4L2_SEL_TGT_CROP_BOUNDS: | |
| sel->r = bttv_tvnorms[btv->tvnorm].cropcap.bounds; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int bttv_s_selection(struct file *file, void *f, struct v4l2_selection *sel) | |
| { | |
| struct bttv_fh *fh = f; | |
| struct bttv *btv = fh->btv; | |
| const struct v4l2_rect *b; | |
| int retval; | |
| struct bttv_crop c; | |
| __s32 b_left; | |
| __s32 b_top; | |
| __s32 b_right; | |
| __s32 b_bottom; | |
| if (sel->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && | |
| sel->type != V4L2_BUF_TYPE_VIDEO_OVERLAY) | |
| return -EINVAL; | |
| if (sel->target != V4L2_SEL_TGT_CROP) | |
| return -EINVAL; | |
| /* Make sure tvnorm, vbi_end and the current cropping | |
| parameters remain consistent until we're done. Note | |
| read() may change vbi_end in check_alloc_btres_lock(). */ | |
| retval = -EBUSY; | |
| if (locked_btres(fh->btv, VIDEO_RESOURCES)) { | |
| return retval; | |
| } | |
| b = &bttv_tvnorms[btv->tvnorm].cropcap.bounds; | |
| b_left = b->left; | |
| b_right = b_left + b->width; | |
| b_bottom = b->top + b->height; | |
| b_top = max(b->top, btv->vbi_end); | |
| if (b_top + 32 >= b_bottom) { | |
| return retval; | |
| } | |
| /* Min. scaled size 48 x 32. */ | |
| c.rect.left = clamp_t(s32, sel->r.left, b_left, b_right - 48); | |
| c.rect.left = min(c.rect.left, (__s32) MAX_HDELAY); | |
| c.rect.width = clamp_t(s32, sel->r.width, | |
| 48, b_right - c.rect.left); | |
| c.rect.top = clamp_t(s32, sel->r.top, b_top, b_bottom - 32); | |
| /* Top and height must be a multiple of two. */ | |
| c.rect.top = (c.rect.top + 1) & ~1; | |
| c.rect.height = clamp_t(s32, sel->r.height, | |
| 32, b_bottom - c.rect.top); | |
| c.rect.height = (c.rect.height + 1) & ~1; | |
| bttv_crop_calc_limits(&c); | |
| sel->r = c.rect; | |
| btv->crop[1] = c; | |
| fh->do_crop = 1; | |
| if (fh->width < c.min_scaled_width) { | |
| fh->width = c.min_scaled_width; | |
| btv->init.width = c.min_scaled_width; | |
| } else if (fh->width > c.max_scaled_width) { | |
| fh->width = c.max_scaled_width; | |
| btv->init.width = c.max_scaled_width; | |
| } | |
| if (fh->height < c.min_scaled_height) { | |
| fh->height = c.min_scaled_height; | |
| btv->init.height = c.min_scaled_height; | |
| } else if (fh->height > c.max_scaled_height) { | |
| fh->height = c.max_scaled_height; | |
| btv->init.height = c.max_scaled_height; | |
| } | |
| return 0; | |
| } | |
| static ssize_t bttv_read(struct file *file, char __user *data, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct bttv_fh *fh = file->private_data; | |
| int retval = 0; | |
| if (fh->btv->errors) | |
| bttv_reinit_bt848(fh->btv); | |
| dprintk("%d: read count=%d type=%s\n", | |
| fh->btv->c.nr, (int)count, v4l2_type_names[fh->type]); | |
| switch (fh->type) { | |
| case V4L2_BUF_TYPE_VIDEO_CAPTURE: | |
| if (!check_alloc_btres_lock(fh->btv, fh, RESOURCE_VIDEO_READ)) { | |
| /* VIDEO_READ in use by another fh, | |
| or VIDEO_STREAM by any fh. */ | |
| return -EBUSY; | |
| } | |
| retval = videobuf_read_one(&fh->cap, data, count, ppos, | |
| file->f_flags & O_NONBLOCK); | |
| free_btres_lock(fh->btv, fh, RESOURCE_VIDEO_READ); | |
| break; | |
| case V4L2_BUF_TYPE_VBI_CAPTURE: | |
| if (!check_alloc_btres_lock(fh->btv,fh,RESOURCE_VBI)) | |
| return -EBUSY; | |
| retval = videobuf_read_stream(&fh->vbi, data, count, ppos, 1, | |
| file->f_flags & O_NONBLOCK); | |
| break; | |
| default: | |
| BUG(); | |
| } | |
| return retval; | |
| } | |
| static unsigned int bttv_poll(struct file *file, poll_table *wait) | |
| { | |
| struct bttv_fh *fh = file->private_data; | |
| struct bttv_buffer *buf; | |
| enum v4l2_field field; | |
| unsigned int rc = 0; | |
| unsigned long req_events = poll_requested_events(wait); | |
| if (v4l2_event_pending(&fh->fh)) | |
| rc = POLLPRI; | |
| else if (req_events & POLLPRI) | |
| poll_wait(file, &fh->fh.wait, wait); | |
| if (!(req_events & (POLLIN | POLLRDNORM))) | |
| return rc; | |
| if (V4L2_BUF_TYPE_VBI_CAPTURE == fh->type) { | |
| if (!check_alloc_btres_lock(fh->btv,fh,RESOURCE_VBI)) | |
| return rc | POLLERR; | |
| return rc | videobuf_poll_stream(file, &fh->vbi, wait); | |
| } | |
| if (check_btres(fh,RESOURCE_VIDEO_STREAM)) { | |
| /* streaming capture */ | |
| if (list_empty(&fh->cap.stream)) | |
| return rc | POLLERR; | |
| buf = list_entry(fh->cap.stream.next,struct bttv_buffer,vb.stream); | |
| } else { | |
| /* read() capture */ | |
| if (NULL == fh->cap.read_buf) { | |
| /* need to capture a new frame */ | |
| if (locked_btres(fh->btv,RESOURCE_VIDEO_STREAM)) | |
| return rc | POLLERR; | |
| fh->cap.read_buf = videobuf_sg_alloc(fh->cap.msize); | |
| if (NULL == fh->cap.read_buf) | |
| return rc | POLLERR; | |
| fh->cap.read_buf->memory = V4L2_MEMORY_USERPTR; | |
| field = videobuf_next_field(&fh->cap); | |
| if (0 != fh->cap.ops->buf_prepare(&fh->cap,fh->cap.read_buf,field)) { | |
| kfree (fh->cap.read_buf); | |
| fh->cap.read_buf = NULL; | |
| return rc | POLLERR; | |
| } | |
| fh->cap.ops->buf_queue(&fh->cap,fh->cap.read_buf); | |
| fh->cap.read_off = 0; | |
| } | |
| buf = (struct bttv_buffer*)fh->cap.read_buf; | |
| } | |
| poll_wait(file, &buf->vb.done, wait); | |
| if (buf->vb.state == VIDEOBUF_DONE || | |
| buf->vb.state == VIDEOBUF_ERROR) | |
| rc = rc | POLLIN|POLLRDNORM; | |
| return rc; | |
| } | |
| static int bttv_open(struct file *file) | |
| { | |
| struct video_device *vdev = video_devdata(file); | |
| struct bttv *btv = video_drvdata(file); | |
| struct bttv_fh *fh; | |
| enum v4l2_buf_type type = 0; | |
| dprintk("open dev=%s\n", video_device_node_name(vdev)); | |
| if (vdev->vfl_type == VFL_TYPE_GRABBER) { | |
| type = V4L2_BUF_TYPE_VIDEO_CAPTURE; | |
| } else if (vdev->vfl_type == VFL_TYPE_VBI) { | |
| type = V4L2_BUF_TYPE_VBI_CAPTURE; | |
| } else { | |
| WARN_ON(1); | |
| return -ENODEV; | |
| } | |
| dprintk("%d: open called (type=%s)\n", | |
| btv->c.nr, v4l2_type_names[type]); | |
| /* allocate per filehandle data */ | |
| fh = kmalloc(sizeof(*fh), GFP_KERNEL); | |
| if (unlikely(!fh)) | |
| return -ENOMEM; | |
| btv->users++; | |
| file->private_data = fh; | |
| *fh = btv->init; | |
| v4l2_fh_init(&fh->fh, vdev); | |
| fh->type = type; | |
| fh->ov.setup_ok = 0; | |
| videobuf_queue_sg_init(&fh->cap, &bttv_video_qops, | |
| &btv->c.pci->dev, &btv->s_lock, | |
| V4L2_BUF_TYPE_VIDEO_CAPTURE, | |
| V4L2_FIELD_INTERLACED, | |
| sizeof(struct bttv_buffer), | |
| fh, &btv->lock); | |
| videobuf_queue_sg_init(&fh->vbi, &bttv_vbi_qops, | |
| &btv->c.pci->dev, &btv->s_lock, | |
| V4L2_BUF_TYPE_VBI_CAPTURE, | |
| V4L2_FIELD_SEQ_TB, | |
| sizeof(struct bttv_buffer), | |
| fh, &btv->lock); | |
| set_tvnorm(btv,btv->tvnorm); | |
| set_input(btv, btv->input, btv->tvnorm); | |
| audio_mute(btv, btv->mute); | |
| /* The V4L2 spec requires one global set of cropping parameters | |
| which only change on request. These are stored in btv->crop[1]. | |
| However for compatibility with V4L apps and cropping unaware | |
| V4L2 apps we now reset the cropping parameters as seen through | |
| this fh, which is to say VIDIOC_G_SELECTION and scaling limit checks | |
| will use btv->crop[0], the default cropping parameters for the | |
| current video standard, and VIDIOC_S_FMT will not implicitely | |
| change the cropping parameters until VIDIOC_S_SELECTION has been | |
| called. */ | |
| fh->do_crop = !reset_crop; /* module parameter */ | |
| /* Likewise there should be one global set of VBI capture | |
| parameters, but for compatibility with V4L apps and earlier | |
| driver versions each fh has its own parameters. */ | |
| bttv_vbi_fmt_reset(&fh->vbi_fmt, btv->tvnorm); | |
| bttv_field_count(btv); | |
| v4l2_fh_add(&fh->fh); | |
| return 0; | |
| } | |
| static int bttv_release(struct file *file) | |
| { | |
| struct bttv_fh *fh = file->private_data; | |
| struct bttv *btv = fh->btv; | |
| /* turn off overlay */ | |
| if (check_btres(fh, RESOURCE_OVERLAY)) | |
| bttv_switch_overlay(btv,fh,NULL); | |
| /* stop video capture */ | |
| if (check_btres(fh, RESOURCE_VIDEO_STREAM)) { | |
| videobuf_streamoff(&fh->cap); | |
| free_btres_lock(btv,fh,RESOURCE_VIDEO_STREAM); | |
| } | |
| if (fh->cap.read_buf) { | |
| buffer_release(&fh->cap,fh->cap.read_buf); | |
| kfree(fh->cap.read_buf); | |
| } | |
| if (check_btres(fh, RESOURCE_VIDEO_READ)) { | |
| free_btres_lock(btv, fh, RESOURCE_VIDEO_READ); | |
| } | |
| /* stop vbi capture */ | |
| if (check_btres(fh, RESOURCE_VBI)) { | |
| videobuf_stop(&fh->vbi); | |
| free_btres_lock(btv,fh,RESOURCE_VBI); | |
| } | |
| /* free stuff */ | |
| videobuf_mmap_free(&fh->cap); | |
| videobuf_mmap_free(&fh->vbi); | |
| file->private_data = NULL; | |
| btv->users--; | |
| bttv_field_count(btv); | |
| if (!btv->users) | |
| audio_mute(btv, btv->mute); | |
| v4l2_fh_del(&fh->fh); | |
| v4l2_fh_exit(&fh->fh); | |
| kfree(fh); | |
| return 0; | |
| } | |
| static int | |
| bttv_mmap(struct file *file, struct vm_area_struct *vma) | |
| { | |
| struct bttv_fh *fh = file->private_data; | |
| dprintk("%d: mmap type=%s 0x%lx+%ld\n", | |
| fh->btv->c.nr, v4l2_type_names[fh->type], | |
| vma->vm_start, vma->vm_end - vma->vm_start); | |
| return videobuf_mmap_mapper(bttv_queue(fh),vma); | |
| } | |
| static const struct v4l2_file_operations bttv_fops = | |
| { | |
| .owner = THIS_MODULE, | |
| .open = bttv_open, | |
| .release = bttv_release, | |
| .unlocked_ioctl = video_ioctl2, | |
| .read = bttv_read, | |
| .mmap = bttv_mmap, | |
| .poll = bttv_poll, | |
| }; | |
| static const struct v4l2_ioctl_ops bttv_ioctl_ops = { | |
| .vidioc_querycap = bttv_querycap, | |
| .vidioc_enum_fmt_vid_cap = bttv_enum_fmt_vid_cap, | |
| .vidioc_g_fmt_vid_cap = bttv_g_fmt_vid_cap, | |
| .vidioc_try_fmt_vid_cap = bttv_try_fmt_vid_cap, | |
| .vidioc_s_fmt_vid_cap = bttv_s_fmt_vid_cap, | |
| .vidioc_enum_fmt_vid_overlay = bttv_enum_fmt_vid_overlay, | |
| .vidioc_g_fmt_vid_overlay = bttv_g_fmt_vid_overlay, | |
| .vidioc_try_fmt_vid_overlay = bttv_try_fmt_vid_overlay, | |
| .vidioc_s_fmt_vid_overlay = bttv_s_fmt_vid_overlay, | |
| .vidioc_g_fmt_vbi_cap = bttv_g_fmt_vbi_cap, | |
| .vidioc_try_fmt_vbi_cap = bttv_try_fmt_vbi_cap, | |
| .vidioc_s_fmt_vbi_cap = bttv_s_fmt_vbi_cap, | |
| .vidioc_cropcap = bttv_cropcap, | |
| .vidioc_reqbufs = bttv_reqbufs, | |
| .vidioc_querybuf = bttv_querybuf, | |
| .vidioc_qbuf = bttv_qbuf, | |
| .vidioc_dqbuf = bttv_dqbuf, | |
| .vidioc_s_std = bttv_s_std, | |
| .vidioc_g_std = bttv_g_std, | |
| .vidioc_enum_input = bttv_enum_input, | |
| .vidioc_g_input = bttv_g_input, | |
| .vidioc_s_input = bttv_s_input, | |
| .vidioc_streamon = bttv_streamon, | |
| .vidioc_streamoff = bttv_streamoff, | |
| .vidioc_g_tuner = bttv_g_tuner, | |
| .vidioc_s_tuner = bttv_s_tuner, | |
| .vidioc_g_selection = bttv_g_selection, | |
| .vidioc_s_selection = bttv_s_selection, | |
| .vidioc_g_fbuf = bttv_g_fbuf, | |
| .vidioc_s_fbuf = bttv_s_fbuf, | |
| .vidioc_overlay = bttv_overlay, | |
| .vidioc_g_parm = bttv_g_parm, | |
| .vidioc_g_frequency = bttv_g_frequency, | |
| .vidioc_s_frequency = bttv_s_frequency, | |
| .vidioc_log_status = bttv_log_status, | |
| .vidioc_querystd = bttv_querystd, | |
| .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, | |
| .vidioc_unsubscribe_event = v4l2_event_unsubscribe, | |
| #ifdef CONFIG_VIDEO_ADV_DEBUG | |
| .vidioc_g_register = bttv_g_register, | |
| .vidioc_s_register = bttv_s_register, | |
| #endif | |
| }; | |
| static struct video_device bttv_video_template = { | |
| .fops = &bttv_fops, | |
| .ioctl_ops = &bttv_ioctl_ops, | |
| .tvnorms = BTTV_NORMS, | |
| }; | |
| /* ----------------------------------------------------------------------- */ | |
| /* radio interface */ | |
| static int radio_open(struct file *file) | |
| { | |
| struct video_device *vdev = video_devdata(file); | |
| struct bttv *btv = video_drvdata(file); | |
| struct bttv_fh *fh; | |
| dprintk("open dev=%s\n", video_device_node_name(vdev)); | |
| dprintk("%d: open called (radio)\n", btv->c.nr); | |
| /* allocate per filehandle data */ | |
| fh = kmalloc(sizeof(*fh), GFP_KERNEL); | |
| if (unlikely(!fh)) | |
| return -ENOMEM; | |
| file->private_data = fh; | |
| *fh = btv->init; | |
| v4l2_fh_init(&fh->fh, vdev); | |
| btv->radio_user++; | |
| audio_mute(btv, btv->mute); | |
| v4l2_fh_add(&fh->fh); | |
| return 0; | |
| } | |
| static int radio_release(struct file *file) | |
| { | |
| struct bttv_fh *fh = file->private_data; | |
| struct bttv *btv = fh->btv; | |
| struct saa6588_command cmd; | |
| file->private_data = NULL; | |
| v4l2_fh_del(&fh->fh); | |
| v4l2_fh_exit(&fh->fh); | |
| kfree(fh); | |
| btv->radio_user--; | |
| bttv_call_all(btv, core, ioctl, SAA6588_CMD_CLOSE, &cmd); | |
| if (btv->radio_user == 0) | |
| btv->has_radio_tuner = 0; | |
| return 0; | |
| } | |
| static int radio_g_tuner(struct file *file, void *priv, struct v4l2_tuner *t) | |
| { | |
| struct bttv_fh *fh = priv; | |
| struct bttv *btv = fh->btv; | |
| if (0 != t->index) | |
| return -EINVAL; | |
| strcpy(t->name, "Radio"); | |
| t->type = V4L2_TUNER_RADIO; | |
| radio_enable(btv); | |
| bttv_call_all(btv, tuner, g_tuner, t); | |
| if (btv->audio_mode_gpio) | |
| btv->audio_mode_gpio(btv, t, 0); | |
| if (btv->has_tea575x) | |
| return snd_tea575x_g_tuner(&btv->tea, t); | |
| return 0; | |
| } | |
| static int radio_s_tuner(struct file *file, void *priv, | |
| const struct v4l2_tuner *t) | |
| { | |
| struct bttv_fh *fh = priv; | |
| struct bttv *btv = fh->btv; | |
| if (0 != t->index) | |
| return -EINVAL; | |
| radio_enable(btv); | |
| bttv_call_all(btv, tuner, s_tuner, t); | |
| return 0; | |
| } | |
| static int radio_s_hw_freq_seek(struct file *file, void *priv, | |
| const struct v4l2_hw_freq_seek *a) | |
| { | |
| struct bttv_fh *fh = priv; | |
| struct bttv *btv = fh->btv; | |
| if (btv->has_tea575x) | |
| return snd_tea575x_s_hw_freq_seek(file, &btv->tea, a); | |
| return -ENOTTY; | |
| } | |
| static int radio_enum_freq_bands(struct file *file, void *priv, | |
| struct v4l2_frequency_band *band) | |
| { | |
| struct bttv_fh *fh = priv; | |
| struct bttv *btv = fh->btv; | |
| if (btv->has_tea575x) | |
| return snd_tea575x_enum_freq_bands(&btv->tea, band); | |
| return -ENOTTY; | |
| } | |
| static ssize_t radio_read(struct file *file, char __user *data, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct bttv_fh *fh = file->private_data; | |
| struct bttv *btv = fh->btv; | |
| struct saa6588_command cmd; | |
| cmd.block_count = count / 3; | |
| cmd.nonblocking = file->f_flags & O_NONBLOCK; | |
| cmd.buffer = data; | |
| cmd.instance = file; | |
| cmd.result = -ENODEV; | |
| radio_enable(btv); | |
| bttv_call_all(btv, core, ioctl, SAA6588_CMD_READ, &cmd); | |
| return cmd.result; | |
| } | |
| static unsigned int radio_poll(struct file *file, poll_table *wait) | |
| { | |
| struct bttv_fh *fh = file->private_data; | |
| struct bttv *btv = fh->btv; | |
| unsigned long req_events = poll_requested_events(wait); | |
| struct saa6588_command cmd; | |
| unsigned int res = 0; | |
| if (v4l2_event_pending(&fh->fh)) | |
| res = POLLPRI; | |
| else if (req_events & POLLPRI) | |
| poll_wait(file, &fh->fh.wait, wait); | |
| radio_enable(btv); | |
| cmd.instance = file; | |
| cmd.event_list = wait; | |
| cmd.result = res; | |
| bttv_call_all(btv, core, ioctl, SAA6588_CMD_POLL, &cmd); | |
| return cmd.result; | |
| } | |
| static const struct v4l2_file_operations radio_fops = | |
| { | |
| .owner = THIS_MODULE, | |
| .open = radio_open, | |
| .read = radio_read, | |
| .release = radio_release, | |
| .unlocked_ioctl = video_ioctl2, | |
| .poll = radio_poll, | |
| }; | |
| static const struct v4l2_ioctl_ops radio_ioctl_ops = { | |
| .vidioc_querycap = bttv_querycap, | |
| .vidioc_log_status = bttv_log_status, | |
| .vidioc_g_tuner = radio_g_tuner, | |
| .vidioc_s_tuner = radio_s_tuner, | |
| .vidioc_g_frequency = bttv_g_frequency, | |
| .vidioc_s_frequency = bttv_s_frequency, | |
| .vidioc_s_hw_freq_seek = radio_s_hw_freq_seek, | |
| .vidioc_enum_freq_bands = radio_enum_freq_bands, | |
| .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, | |
| .vidioc_unsubscribe_event = v4l2_event_unsubscribe, | |
| }; | |
| static struct video_device radio_template = { | |
| .fops = &radio_fops, | |
| .ioctl_ops = &radio_ioctl_ops, | |
| }; | |
| /* ----------------------------------------------------------------------- */ | |
| /* some debug code */ | |
| static int bttv_risc_decode(u32 risc) | |
| { | |
| static char *instr[16] = { | |
| [ BT848_RISC_WRITE >> 28 ] = "write", | |
| [ BT848_RISC_SKIP >> 28 ] = "skip", | |
| [ BT848_RISC_WRITEC >> 28 ] = "writec", | |
| [ BT848_RISC_JUMP >> 28 ] = "jump", | |
| [ BT848_RISC_SYNC >> 28 ] = "sync", | |
| [ BT848_RISC_WRITE123 >> 28 ] = "write123", | |
| [ BT848_RISC_SKIP123 >> 28 ] = "skip123", | |
| [ BT848_RISC_WRITE1S23 >> 28 ] = "write1s23", | |
| }; | |
| static int incr[16] = { | |
| [ BT848_RISC_WRITE >> 28 ] = 2, | |
| [ BT848_RISC_JUMP >> 28 ] = 2, | |
| [ BT848_RISC_SYNC >> 28 ] = 2, | |
| [ BT848_RISC_WRITE123 >> 28 ] = 5, | |
| [ BT848_RISC_SKIP123 >> 28 ] = 2, | |
| [ BT848_RISC_WRITE1S23 >> 28 ] = 3, | |
| }; | |
| static char *bits[] = { | |
| "be0", "be1", "be2", "be3/resync", | |
| "set0", "set1", "set2", "set3", | |
| "clr0", "clr1", "clr2", "clr3", | |
| "irq", "res", "eol", "sol", | |
| }; | |
| int i; | |
| pr_cont("0x%08x [ %s", risc, | |
| instr[risc >> 28] ? instr[risc >> 28] : "INVALID"); | |
| for (i = ARRAY_SIZE(bits)-1; i >= 0; i--) | |
| if (risc & (1 << (i + 12))) | |
| pr_cont(" %s", bits[i]); | |
| pr_cont(" count=%d ]\n", risc & 0xfff); | |
| return incr[risc >> 28] ? incr[risc >> 28] : 1; | |
| } | |
| static void bttv_risc_disasm(struct bttv *btv, | |
| struct btcx_riscmem *risc) | |
| { | |
| unsigned int i,j,n; | |
| pr_info("%s: risc disasm: %p [dma=0x%08lx]\n", | |
| btv->c.v4l2_dev.name, risc->cpu, (unsigned long)risc->dma); | |
| for (i = 0; i < (risc->size >> 2); i += n) { | |
| pr_info("%s: 0x%lx: ", | |
| btv->c.v4l2_dev.name, | |
| (unsigned long)(risc->dma + (i<<2))); | |
| n = bttv_risc_decode(le32_to_cpu(risc->cpu[i])); | |
| for (j = 1; j < n; j++) | |
| pr_info("%s: 0x%lx: 0x%08x [ arg #%d ]\n", | |
| btv->c.v4l2_dev.name, | |
| (unsigned long)(risc->dma + ((i+j)<<2)), | |
| risc->cpu[i+j], j); | |
| if (0 == risc->cpu[i]) | |
| break; | |
| } | |
| } | |
| static void bttv_print_riscaddr(struct bttv *btv) | |
| { | |
| pr_info(" main: %08llx\n", (unsigned long long)btv->main.dma); | |
| pr_info(" vbi : o=%08llx e=%08llx\n", | |
| btv->cvbi ? (unsigned long long)btv->cvbi->top.dma : 0, | |
| btv->cvbi ? (unsigned long long)btv->cvbi->bottom.dma : 0); | |
| pr_info(" cap : o=%08llx e=%08llx\n", | |
| btv->curr.top | |
| ? (unsigned long long)btv->curr.top->top.dma : 0, | |
| btv->curr.bottom | |
| ? (unsigned long long)btv->curr.bottom->bottom.dma : 0); | |
| pr_info(" scr : o=%08llx e=%08llx\n", | |
| btv->screen ? (unsigned long long)btv->screen->top.dma : 0, | |
| btv->screen ? (unsigned long long)btv->screen->bottom.dma : 0); | |
| bttv_risc_disasm(btv, &btv->main); | |
| } | |
| /* ----------------------------------------------------------------------- */ | |
| /* irq handler */ | |
| static char *irq_name[] = { | |
| "FMTCHG", // format change detected (525 vs. 625) | |
| "VSYNC", // vertical sync (new field) | |
| "HSYNC", // horizontal sync | |
| "OFLOW", // chroma/luma AGC overflow | |
| "HLOCK", // horizontal lock changed | |
| "VPRES", // video presence changed | |
| "6", "7", | |
| "I2CDONE", // hw irc operation finished | |
| "GPINT", // gpio port triggered irq | |
| "10", | |
| "RISCI", // risc instruction triggered irq | |
| "FBUS", // pixel data fifo dropped data (high pci bus latencies) | |
| "FTRGT", // pixel data fifo overrun | |
| "FDSR", // fifo data stream resyncronisation | |
| "PPERR", // parity error (data transfer) | |
| "RIPERR", // parity error (read risc instructions) | |
| "PABORT", // pci abort | |
| "OCERR", // risc instruction error | |
| "SCERR", // syncronisation error | |
| }; | |
| static void bttv_print_irqbits(u32 print, u32 mark) | |
| { | |
| unsigned int i; | |
| pr_cont("bits:"); | |
| for (i = 0; i < ARRAY_SIZE(irq_name); i++) { | |
| if (print & (1 << i)) | |
| pr_cont(" %s", irq_name[i]); | |
| if (mark & (1 << i)) | |
| pr_cont("*"); | |
| } | |
| } | |
| static void bttv_irq_debug_low_latency(struct bttv *btv, u32 rc) | |
| { | |
| pr_warn("%d: irq: skipped frame [main=%lx,o_vbi=%lx,o_field=%lx,rc=%lx]\n", | |
| btv->c.nr, | |
| (unsigned long)btv->main.dma, | |
| (unsigned long)le32_to_cpu(btv->main.cpu[RISC_SLOT_O_VBI+1]), | |
| (unsigned long)le32_to_cpu(btv->main.cpu[RISC_SLOT_O_FIELD+1]), | |
| (unsigned long)rc); | |
| if (0 == (btread(BT848_DSTATUS) & BT848_DSTATUS_HLOC)) { | |
| pr_notice("%d: Oh, there (temporarily?) is no input signal. " | |
| "Ok, then this is harmless, don't worry ;)\n", | |
| btv->c.nr); | |
| return; | |
| } | |
| pr_notice("%d: Uhm. Looks like we have unusual high IRQ latencies\n", | |
| btv->c.nr); | |
| pr_notice("%d: Lets try to catch the culpit red-handed ...\n", | |
| btv->c.nr); | |
| dump_stack(); | |
| } | |
| static int | |
| bttv_irq_next_video(struct bttv *btv, struct bttv_buffer_set *set) | |
| { | |
| struct bttv_buffer *item; | |
| memset(set,0,sizeof(*set)); | |
| /* capture request ? */ | |
| if (!list_empty(&btv->capture)) { | |
| set->frame_irq = 1; | |
| item = list_entry(btv->capture.next, struct bttv_buffer, vb.queue); | |
| if (V4L2_FIELD_HAS_TOP(item->vb.field)) | |
| set->top = item; | |
| if (V4L2_FIELD_HAS_BOTTOM(item->vb.field)) | |
| set->bottom = item; | |
| /* capture request for other field ? */ | |
| if (!V4L2_FIELD_HAS_BOTH(item->vb.field) && | |
| (item->vb.queue.next != &btv->capture)) { | |
| item = list_entry(item->vb.queue.next, struct bttv_buffer, vb.queue); | |
| /* Mike Isely <isely@pobox.com> - Only check | |
| * and set up the bottom field in the logic | |
| * below. Don't ever do the top field. This | |
| * of course means that if we set up the | |
| * bottom field in the above code that we'll | |
| * actually skip a field. But that's OK. | |
| * Having processed only a single buffer this | |
| * time, then the next time around the first | |
| * available buffer should be for a top field. | |
| * That will then cause us here to set up a | |
| * top then a bottom field in the normal way. | |
| * The alternative to this understanding is | |
| * that we set up the second available buffer | |
| * as a top field, but that's out of order | |
| * since this driver always processes the top | |
| * field first - the effect will be the two | |
| * buffers being returned in the wrong order, | |
| * with the second buffer also being delayed | |
| * by one field time (owing to the fifo nature | |
| * of videobuf). Worse still, we'll be stuck | |
| * doing fields out of order now every time | |
| * until something else causes a field to be | |
| * dropped. By effectively forcing a field to | |
| * drop this way then we always get back into | |
| * sync within a single frame time. (Out of | |
| * order fields can screw up deinterlacing | |
| * algorithms.) */ | |
| if (!V4L2_FIELD_HAS_BOTH(item->vb.field)) { | |
| if (NULL == set->bottom && | |
| V4L2_FIELD_BOTTOM == item->vb.field) { | |
| set->bottom = item; | |
| } | |
| if (NULL != set->top && NULL != set->bottom) | |
| set->top_irq = 2; | |
| } | |
| } | |
| } | |
| /* screen overlay ? */ | |
| if (NULL != btv->screen) { | |
| if (V4L2_FIELD_HAS_BOTH(btv->screen->vb.field)) { | |
| if (NULL == set->top && NULL == set->bottom) { | |
| set->top = btv->screen; | |
| set->bottom = btv->screen; | |
| } | |
| } else { | |
| if (V4L2_FIELD_TOP == btv->screen->vb.field && | |
| NULL == set->top) { | |
| set->top = btv->screen; | |
| } | |
| if (V4L2_FIELD_BOTTOM == btv->screen->vb.field && | |
| NULL == set->bottom) { | |
| set->bottom = btv->screen; | |
| } | |
| } | |
| } | |
| dprintk("%d: next set: top=%p bottom=%p [screen=%p,irq=%d,%d]\n", | |
| btv->c.nr, set->top, set->bottom, | |
| btv->screen, set->frame_irq, set->top_irq); | |
| return 0; | |
| } | |
| static void | |
| bttv_irq_wakeup_video(struct bttv *btv, struct bttv_buffer_set *wakeup, | |
| struct bttv_buffer_set *curr, unsigned int state) | |
| { | |
| struct timeval ts; | |
| v4l2_get_timestamp(&ts); | |
| if (wakeup->top == wakeup->bottom) { | |
| if (NULL != wakeup->top && curr->top != wakeup->top) { | |
| if (irq_debug > 1) | |
| pr_debug("%d: wakeup: both=%p\n", | |
| btv->c.nr, wakeup->top); | |
| wakeup->top->vb.ts = ts; | |
| wakeup->top->vb.field_count = btv->field_count; | |
| wakeup->top->vb.state = state; | |
| wake_up(&wakeup->top->vb.done); | |
| } | |
| } else { | |
| if (NULL != wakeup->top && curr->top != wakeup->top) { | |
| if (irq_debug > 1) | |
| pr_debug("%d: wakeup: top=%p\n", | |
| btv->c.nr, wakeup->top); | |
| wakeup->top->vb.ts = ts; | |
| wakeup->top->vb.field_count = btv->field_count; | |
| wakeup->top->vb.state = state; | |
| wake_up(&wakeup->top->vb.done); | |
| } | |
| if (NULL != wakeup->bottom && curr->bottom != wakeup->bottom) { | |
| if (irq_debug > 1) | |
| pr_debug("%d: wakeup: bottom=%p\n", | |
| btv->c.nr, wakeup->bottom); | |
| wakeup->bottom->vb.ts = ts; | |
| wakeup->bottom->vb.field_count = btv->field_count; | |
| wakeup->bottom->vb.state = state; | |
| wake_up(&wakeup->bottom->vb.done); | |
| } | |
| } | |
| } | |
| static void | |
| bttv_irq_wakeup_vbi(struct bttv *btv, struct bttv_buffer *wakeup, | |
| unsigned int state) | |
| { | |
| if (NULL == wakeup) | |
| return; | |
| v4l2_get_timestamp(&wakeup->vb.ts); | |
| wakeup->vb.field_count = btv->field_count; | |
| wakeup->vb.state = state; | |
| wake_up(&wakeup->vb.done); | |
| } | |
| static void bttv_irq_timeout(unsigned long data) | |
| { | |
| struct bttv *btv = (struct bttv *)data; | |
| struct bttv_buffer_set old,new; | |
| struct bttv_buffer *ovbi; | |
| struct bttv_buffer *item; | |
| unsigned long flags; | |
| if (bttv_verbose) { | |
| pr_info("%d: timeout: drop=%d irq=%d/%d, risc=%08x, ", | |
| btv->c.nr, btv->framedrop, btv->irq_me, btv->irq_total, | |
| btread(BT848_RISC_COUNT)); | |
| bttv_print_irqbits(btread(BT848_INT_STAT),0); | |
| pr_cont("\n"); | |
| } | |
| spin_lock_irqsave(&btv->s_lock,flags); | |
| /* deactivate stuff */ | |
| memset(&new,0,sizeof(new)); | |
| old = btv->curr; | |
| ovbi = btv->cvbi; | |
| btv->curr = new; | |
| btv->cvbi = NULL; | |
| btv->loop_irq = 0; | |
| bttv_buffer_activate_video(btv, &new); | |
| bttv_buffer_activate_vbi(btv, NULL); | |
| bttv_set_dma(btv, 0); | |
| /* wake up */ | |
| bttv_irq_wakeup_video(btv, &old, &new, VIDEOBUF_ERROR); | |
| bttv_irq_wakeup_vbi(btv, ovbi, VIDEOBUF_ERROR); | |
| /* cancel all outstanding capture / vbi requests */ | |
| while (!list_empty(&btv->capture)) { | |
| item = list_entry(btv->capture.next, struct bttv_buffer, vb.queue); | |
| list_del(&item->vb.queue); | |
| item->vb.state = VIDEOBUF_ERROR; | |
| wake_up(&item->vb.done); | |
| } | |
| while (!list_empty(&btv->vcapture)) { | |
| item = list_entry(btv->vcapture.next, struct bttv_buffer, vb.queue); | |
| list_del(&item->vb.queue); | |
| item->vb.state = VIDEOBUF_ERROR; | |
| wake_up(&item->vb.done); | |
| } | |
| btv->errors++; | |
| spin_unlock_irqrestore(&btv->s_lock,flags); | |
| } | |
| static void | |
| bttv_irq_wakeup_top(struct bttv *btv) | |
| { | |
| struct bttv_buffer *wakeup = btv->curr.top; | |
| if (NULL == wakeup) | |
| return; | |
| spin_lock(&btv->s_lock); | |
| btv->curr.top_irq = 0; | |
| btv->curr.top = NULL; | |
| bttv_risc_hook(btv, RISC_SLOT_O_FIELD, NULL, 0); | |
| v4l2_get_timestamp(&wakeup->vb.ts); | |
| wakeup->vb.field_count = btv->field_count; | |
| wakeup->vb.state = VIDEOBUF_DONE; | |
| wake_up(&wakeup->vb.done); | |
| spin_unlock(&btv->s_lock); | |
| } | |
| static inline int is_active(struct btcx_riscmem *risc, u32 rc) | |
| { | |
| if (rc < risc->dma) | |
| return 0; | |
| if (rc > risc->dma + risc->size) | |
| return 0; | |
| return 1; | |
| } | |
| static void | |
| bttv_irq_switch_video(struct bttv *btv) | |
| { | |
| struct bttv_buffer_set new; | |
| struct bttv_buffer_set old; | |
| dma_addr_t rc; | |
| spin_lock(&btv->s_lock); | |
| /* new buffer set */ | |
| bttv_irq_next_video(btv, &new); | |
| rc = btread(BT848_RISC_COUNT); | |
| if ((btv->curr.top && is_active(&btv->curr.top->top, rc)) || | |
| (btv->curr.bottom && is_active(&btv->curr.bottom->bottom, rc))) { | |
| btv->framedrop++; | |
| if (debug_latency) | |
| bttv_irq_debug_low_latency(btv, rc); | |
| spin_unlock(&btv->s_lock); | |
| return; | |
| } | |
| /* switch over */ | |
| old = btv->curr; | |
| btv->curr = new; | |
| btv->loop_irq &= ~1; | |
| bttv_buffer_activate_video(btv, &new); | |
| bttv_set_dma(btv, 0); | |
| /* switch input */ | |
| if (UNSET != btv->new_input) { | |
| video_mux(btv,btv->new_input); | |
| btv->new_input = UNSET; | |
| } | |
| /* wake up finished buffers */ | |
| bttv_irq_wakeup_video(btv, &old, &new, VIDEOBUF_DONE); | |
| spin_unlock(&btv->s_lock); | |
| } | |
| static void | |
| bttv_irq_switch_vbi(struct bttv *btv) | |
| { | |
| struct bttv_buffer *new = NULL; | |
| struct bttv_buffer *old; | |
| u32 rc; | |
| spin_lock(&btv->s_lock); | |
| if (!list_empty(&btv->vcapture)) | |
| new = list_entry(btv->vcapture.next, struct bttv_buffer, vb.queue); | |
| old = btv->cvbi; | |
| rc = btread(BT848_RISC_COUNT); | |
| if (NULL != old && (is_active(&old->top, rc) || | |
| is_active(&old->bottom, rc))) { | |
| btv->framedrop++; | |
| if (debug_latency) | |
| bttv_irq_debug_low_latency(btv, rc); | |
| spin_unlock(&btv->s_lock); | |
| return; | |
| } | |
| /* switch */ | |
| btv->cvbi = new; | |
| btv->loop_irq &= ~4; | |
| bttv_buffer_activate_vbi(btv, new); | |
| bttv_set_dma(btv, 0); | |
| bttv_irq_wakeup_vbi(btv, old, VIDEOBUF_DONE); | |
| spin_unlock(&btv->s_lock); | |
| } | |
| static irqreturn_t bttv_irq(int irq, void *dev_id) | |
| { | |
| u32 stat,astat; | |
| u32 dstat; | |
| int count; | |
| struct bttv *btv; | |
| int handled = 0; | |
| btv=(struct bttv *)dev_id; | |
| count=0; | |
| while (1) { | |
| /* get/clear interrupt status bits */ | |
| stat=btread(BT848_INT_STAT); | |
| astat=stat&btread(BT848_INT_MASK); | |
| if (!astat) | |
| break; | |
| handled = 1; | |
| btwrite(stat,BT848_INT_STAT); | |
| /* get device status bits */ | |
| dstat=btread(BT848_DSTATUS); | |
| if (irq_debug) { | |
| pr_debug("%d: irq loop=%d fc=%d riscs=%x, riscc=%08x, ", | |
| btv->c.nr, count, btv->field_count, | |
| stat>>28, btread(BT848_RISC_COUNT)); | |
| bttv_print_irqbits(stat,astat); | |
| if (stat & BT848_INT_HLOCK) | |
| pr_cont(" HLOC => %s", | |
| dstat & BT848_DSTATUS_HLOC | |
| ? "yes" : "no"); | |
| if (stat & BT848_INT_VPRES) | |
| pr_cont(" PRES => %s", | |
| dstat & BT848_DSTATUS_PRES | |
| ? "yes" : "no"); | |
| if (stat & BT848_INT_FMTCHG) | |
| pr_cont(" NUML => %s", | |
| dstat & BT848_DSTATUS_NUML | |
| ? "625" : "525"); | |
| pr_cont("\n"); | |
| } | |
| if (astat&BT848_INT_VSYNC) | |
| btv->field_count++; | |
| if ((astat & BT848_INT_GPINT) && btv->remote) { | |
| bttv_input_irq(btv); | |
| } | |
| if (astat & BT848_INT_I2CDONE) { | |
| btv->i2c_done = stat; | |
| wake_up(&btv->i2c_queue); | |
| } | |
| if ((astat & BT848_INT_RISCI) && (stat & (4<<28))) | |
| bttv_irq_switch_vbi(btv); | |
| if ((astat & BT848_INT_RISCI) && (stat & (2<<28))) | |
| bttv_irq_wakeup_top(btv); | |
| if ((astat & BT848_INT_RISCI) && (stat & (1<<28))) | |
| bttv_irq_switch_video(btv); | |
| if ((astat & BT848_INT_HLOCK) && btv->opt_automute) | |
| /* trigger automute */ | |
| audio_mux_gpio(btv, btv->audio_input, btv->mute); | |
| if (astat & (BT848_INT_SCERR|BT848_INT_OCERR)) { | |
| pr_info("%d: %s%s @ %08x,", | |
| btv->c.nr, | |
| (astat & BT848_INT_SCERR) ? "SCERR" : "", | |
| (astat & BT848_INT_OCERR) ? "OCERR" : "", | |
| btread(BT848_RISC_COUNT)); | |
| bttv_print_irqbits(stat,astat); | |
| pr_cont("\n"); | |
| if (bttv_debug) | |
| bttv_print_riscaddr(btv); | |
| } | |
| if (fdsr && astat & BT848_INT_FDSR) { | |
| pr_info("%d: FDSR @ %08x\n", | |
| btv->c.nr, btread(BT848_RISC_COUNT)); | |
| if (bttv_debug) | |
| bttv_print_riscaddr(btv); | |
| } | |
| count++; | |
| if (count > 4) { | |
| if (count > 8 || !(astat & BT848_INT_GPINT)) { | |
| btwrite(0, BT848_INT_MASK); | |
| pr_err("%d: IRQ lockup, cleared int mask [", | |
| btv->c.nr); | |
| } else { | |
| pr_err("%d: IRQ lockup, clearing GPINT from int mask [", | |
| btv->c.nr); | |
| btwrite(btread(BT848_INT_MASK) & (-1 ^ BT848_INT_GPINT), | |
| BT848_INT_MASK); | |
| } | |
| bttv_print_irqbits(stat,astat); | |
| pr_cont("]\n"); | |
| } | |
| } | |
| btv->irq_total++; | |
| if (handled) | |
| btv->irq_me++; | |
| return IRQ_RETVAL(handled); | |
| } | |
| /* ----------------------------------------------------------------------- */ | |
| /* initialization */ | |
| static void vdev_init(struct bttv *btv, | |
| struct video_device *vfd, | |
| const struct video_device *template, | |
| const char *type_name) | |
| { | |
| *vfd = *template; | |
| vfd->v4l2_dev = &btv->c.v4l2_dev; | |
| vfd->release = video_device_release_empty; | |
| video_set_drvdata(vfd, btv); | |
| snprintf(vfd->name, sizeof(vfd->name), "BT%d%s %s (%s)", | |
| btv->id, (btv->id==848 && btv->revision==0x12) ? "A" : "", | |
| type_name, bttv_tvcards[btv->c.type].name); | |
| if (btv->tuner_type == TUNER_ABSENT) { | |
| v4l2_disable_ioctl(vfd, VIDIOC_G_FREQUENCY); | |
| v4l2_disable_ioctl(vfd, VIDIOC_S_FREQUENCY); | |
| v4l2_disable_ioctl(vfd, VIDIOC_G_TUNER); | |
| v4l2_disable_ioctl(vfd, VIDIOC_S_TUNER); | |
| } | |
| } | |
| static void bttv_unregister_video(struct bttv *btv) | |
| { | |
| video_unregister_device(&btv->video_dev); | |
| video_unregister_device(&btv->vbi_dev); | |
| video_unregister_device(&btv->radio_dev); | |
| } | |
| /* register video4linux devices */ | |
| static int bttv_register_video(struct bttv *btv) | |
| { | |
| if (no_overlay > 0) | |
| pr_notice("Overlay support disabled\n"); | |
| /* video */ | |
| vdev_init(btv, &btv->video_dev, &bttv_video_template, "video"); | |
| if (video_register_device(&btv->video_dev, VFL_TYPE_GRABBER, | |
| video_nr[btv->c.nr]) < 0) | |
| goto err; | |
| pr_info("%d: registered device %s\n", | |
| btv->c.nr, video_device_node_name(&btv->video_dev)); | |
| if (device_create_file(&btv->video_dev.dev, | |
| &dev_attr_card)<0) { | |
| pr_err("%d: device_create_file 'card' failed\n", btv->c.nr); | |
| goto err; | |
| } | |
| /* vbi */ | |
| vdev_init(btv, &btv->vbi_dev, &bttv_video_template, "vbi"); | |
| if (video_register_device(&btv->vbi_dev, VFL_TYPE_VBI, | |
| vbi_nr[btv->c.nr]) < 0) | |
| goto err; | |
| pr_info("%d: registered device %s\n", | |
| btv->c.nr, video_device_node_name(&btv->vbi_dev)); | |
| if (!btv->has_radio) | |
| return 0; | |
| /* radio */ | |
| vdev_init(btv, &btv->radio_dev, &radio_template, "radio"); | |
| btv->radio_dev.ctrl_handler = &btv->radio_ctrl_handler; | |
| if (video_register_device(&btv->radio_dev, VFL_TYPE_RADIO, | |
| radio_nr[btv->c.nr]) < 0) | |
| goto err; | |
| pr_info("%d: registered device %s\n", | |
| btv->c.nr, video_device_node_name(&btv->radio_dev)); | |
| /* all done */ | |
| return 0; | |
| err: | |
| bttv_unregister_video(btv); | |
| return -1; | |
| } | |
| /* on OpenFirmware machines (PowerMac at least), PCI memory cycle */ | |
| /* response on cards with no firmware is not enabled by OF */ | |
| static void pci_set_command(struct pci_dev *dev) | |
| { | |
| #if defined(__powerpc__) | |
| unsigned int cmd; | |
| pci_read_config_dword(dev, PCI_COMMAND, &cmd); | |
| cmd = (cmd | PCI_COMMAND_MEMORY ); | |
| pci_write_config_dword(dev, PCI_COMMAND, cmd); | |
| #endif | |
| } | |
| static int bttv_probe(struct pci_dev *dev, const struct pci_device_id *pci_id) | |
| { | |
| struct v4l2_frequency init_freq = { | |
| .tuner = 0, | |
| .type = V4L2_TUNER_ANALOG_TV, | |
| .frequency = 980, | |
| }; | |
| int result; | |
| unsigned char lat; | |
| struct bttv *btv; | |
| struct v4l2_ctrl_handler *hdl; | |
| if (bttv_num == BTTV_MAX) | |
| return -ENOMEM; | |
| pr_info("Bt8xx card found (%d)\n", bttv_num); | |
| bttvs[bttv_num] = btv = kzalloc(sizeof(*btv), GFP_KERNEL); | |
| if (btv == NULL) { | |
| pr_err("out of memory\n"); | |
| return -ENOMEM; | |
| } | |
| btv->c.nr = bttv_num; | |
| snprintf(btv->c.v4l2_dev.name, sizeof(btv->c.v4l2_dev.name), | |
| "bttv%d", btv->c.nr); | |
| /* initialize structs / fill in defaults */ | |
| mutex_init(&btv->lock); | |
| spin_lock_init(&btv->s_lock); | |
| spin_lock_init(&btv->gpio_lock); | |
| init_waitqueue_head(&btv->i2c_queue); | |
| INIT_LIST_HEAD(&btv->c.subs); | |
| INIT_LIST_HEAD(&btv->capture); | |
| INIT_LIST_HEAD(&btv->vcapture); | |
| init_timer(&btv->timeout); | |
| btv->timeout.function = bttv_irq_timeout; | |
| btv->timeout.data = (unsigned long)btv; | |
| btv->i2c_rc = -1; | |
| btv->tuner_type = UNSET; | |
| btv->new_input = UNSET; | |
| btv->has_radio=radio[btv->c.nr]; | |
| /* pci stuff (init, get irq/mmio, ... */ | |
| btv->c.pci = dev; | |
| btv->id = dev->device; | |
| if (pci_enable_device(dev)) { | |
| pr_warn("%d: Can't enable device\n", btv->c.nr); | |
| return -EIO; | |
| } | |
| if (pci_set_dma_mask(dev, DMA_BIT_MASK(32))) { | |
| pr_warn("%d: No suitable DMA available\n", btv->c.nr); | |
| return -EIO; | |
| } | |
| if (!request_mem_region(pci_resource_start(dev,0), | |
| pci_resource_len(dev,0), | |
| btv->c.v4l2_dev.name)) { | |
| pr_warn("%d: can't request iomem (0x%llx)\n", | |
| btv->c.nr, | |
| (unsigned long long)pci_resource_start(dev, 0)); | |
| return -EBUSY; | |
| } | |
| pci_set_master(dev); | |
| pci_set_command(dev); | |
| result = v4l2_device_register(&dev->dev, &btv->c.v4l2_dev); | |
| if (result < 0) { | |
| pr_warn("%d: v4l2_device_register() failed\n", btv->c.nr); | |
| goto fail0; | |
| } | |
| hdl = &btv->ctrl_handler; | |
| v4l2_ctrl_handler_init(hdl, 20); | |
| btv->c.v4l2_dev.ctrl_handler = hdl; | |
| v4l2_ctrl_handler_init(&btv->radio_ctrl_handler, 6); | |
| btv->revision = dev->revision; | |
| pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); | |
| pr_info("%d: Bt%d (rev %d) at %s, irq: %d, latency: %d, mmio: 0x%llx\n", | |
| bttv_num, btv->id, btv->revision, pci_name(dev), | |
| btv->c.pci->irq, lat, | |
| (unsigned long long)pci_resource_start(dev, 0)); | |
| schedule(); | |
| btv->bt848_mmio = ioremap(pci_resource_start(dev, 0), 0x1000); | |
| if (NULL == btv->bt848_mmio) { | |
| pr_err("%d: ioremap() failed\n", btv->c.nr); | |
| result = -EIO; | |
| goto fail1; | |
| } | |
| /* identify card */ | |
| bttv_idcard(btv); | |
| /* disable irqs, register irq handler */ | |
| btwrite(0, BT848_INT_MASK); | |
| result = request_irq(btv->c.pci->irq, bttv_irq, | |
| IRQF_SHARED, btv->c.v4l2_dev.name, (void *)btv); | |
| if (result < 0) { | |
| pr_err("%d: can't get IRQ %d\n", | |
| bttv_num, btv->c.pci->irq); | |
| goto fail1; | |
| } | |
| if (0 != bttv_handle_chipset(btv)) { | |
| result = -EIO; | |
| goto fail2; | |
| } | |
| /* init options from insmod args */ | |
| btv->opt_combfilter = combfilter; | |
| bttv_ctrl_combfilter.def = combfilter; | |
| bttv_ctrl_lumafilter.def = lumafilter; | |
| btv->opt_automute = automute; | |
| bttv_ctrl_automute.def = automute; | |
| bttv_ctrl_agc_crush.def = agc_crush; | |
| btv->opt_vcr_hack = vcr_hack; | |
| bttv_ctrl_vcr_hack.def = vcr_hack; | |
| bttv_ctrl_whitecrush_upper.def = whitecrush_upper; | |
| bttv_ctrl_whitecrush_lower.def = whitecrush_lower; | |
| btv->opt_uv_ratio = uv_ratio; | |
| bttv_ctrl_uv_ratio.def = uv_ratio; | |
| bttv_ctrl_full_luma.def = full_luma_range; | |
| bttv_ctrl_coring.def = coring; | |
| /* fill struct bttv with some useful defaults */ | |
| btv->init.btv = btv; | |
| btv->init.ov.w.width = 320; | |
| btv->init.ov.w.height = 240; | |
| btv->init.fmt = format_by_fourcc(V4L2_PIX_FMT_BGR24); | |
| btv->init.width = 320; | |
| btv->init.height = 240; | |
| btv->init.ov.w.width = 320; | |
| btv->init.ov.w.height = 240; | |
| btv->init.ov.field = V4L2_FIELD_INTERLACED; | |
| btv->input = 0; | |
| v4l2_ctrl_new_std(hdl, &bttv_ctrl_ops, | |
| V4L2_CID_BRIGHTNESS, 0, 0xff00, 0x100, 32768); | |
| v4l2_ctrl_new_std(hdl, &bttv_ctrl_ops, | |
| V4L2_CID_CONTRAST, 0, 0xff80, 0x80, 0x6c00); | |
| v4l2_ctrl_new_std(hdl, &bttv_ctrl_ops, | |
| V4L2_CID_SATURATION, 0, 0xff80, 0x80, 32768); | |
| v4l2_ctrl_new_std(hdl, &bttv_ctrl_ops, | |
| V4L2_CID_COLOR_KILLER, 0, 1, 1, 0); | |
| v4l2_ctrl_new_std(hdl, &bttv_ctrl_ops, | |
| V4L2_CID_HUE, 0, 0xff00, 0x100, 32768); | |
| v4l2_ctrl_new_std(hdl, &bttv_ctrl_ops, | |
| V4L2_CID_CHROMA_AGC, 0, 1, 1, !!chroma_agc); | |
| v4l2_ctrl_new_std(hdl, &bttv_ctrl_ops, | |
| V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0); | |
| if (btv->volume_gpio) | |
| v4l2_ctrl_new_std(hdl, &bttv_ctrl_ops, | |
| V4L2_CID_AUDIO_VOLUME, 0, 0xff00, 0x100, 0xff00); | |
| v4l2_ctrl_new_custom(hdl, &bttv_ctrl_combfilter, NULL); | |
| v4l2_ctrl_new_custom(hdl, &bttv_ctrl_automute, NULL); | |
| v4l2_ctrl_new_custom(hdl, &bttv_ctrl_lumafilter, NULL); | |
| v4l2_ctrl_new_custom(hdl, &bttv_ctrl_agc_crush, NULL); | |
| v4l2_ctrl_new_custom(hdl, &bttv_ctrl_vcr_hack, NULL); | |
| v4l2_ctrl_new_custom(hdl, &bttv_ctrl_whitecrush_lower, NULL); | |
| v4l2_ctrl_new_custom(hdl, &bttv_ctrl_whitecrush_upper, NULL); | |
| v4l2_ctrl_new_custom(hdl, &bttv_ctrl_uv_ratio, NULL); | |
| v4l2_ctrl_new_custom(hdl, &bttv_ctrl_full_luma, NULL); | |
| v4l2_ctrl_new_custom(hdl, &bttv_ctrl_coring, NULL); | |
| /* initialize hardware */ | |
| if (bttv_gpio) | |
| bttv_gpio_tracking(btv,"pre-init"); | |
| bttv_risc_init_main(btv); | |
| init_bt848(btv); | |
| /* gpio */ | |
| btwrite(0x00, BT848_GPIO_REG_INP); | |
| btwrite(0x00, BT848_GPIO_OUT_EN); | |
| if (bttv_verbose) | |
| bttv_gpio_tracking(btv,"init"); | |
| /* needs to be done before i2c is registered */ | |
| bttv_init_card1(btv); | |
| /* register i2c + gpio */ | |
| init_bttv_i2c(btv); | |
| /* some card-specific stuff (needs working i2c) */ | |
| bttv_init_card2(btv); | |
| bttv_init_tuner(btv); | |
| if (btv->tuner_type != TUNER_ABSENT) { | |
| bttv_set_frequency(btv, &init_freq); | |
| btv->radio_freq = 90500 * 16; /* 90.5Mhz default */ | |
| } | |
| btv->std = V4L2_STD_PAL; | |
| init_irqreg(btv); | |
| if (!bttv_tvcards[btv->c.type].no_video) | |
| v4l2_ctrl_handler_setup(hdl); | |
| if (hdl->error) { | |
| result = hdl->error; | |
| goto fail2; | |
| } | |
| /* mute device */ | |
| audio_mute(btv, 1); | |
| /* register video4linux + input */ | |
| if (!bttv_tvcards[btv->c.type].no_video) { | |
| v4l2_ctrl_add_handler(&btv->radio_ctrl_handler, hdl, | |
| v4l2_ctrl_radio_filter); | |
| if (btv->radio_ctrl_handler.error) { | |
| result = btv->radio_ctrl_handler.error; | |
| goto fail2; | |
| } | |
| set_input(btv, 0, btv->tvnorm); | |
| bttv_crop_reset(&btv->crop[0], btv->tvnorm); | |
| btv->crop[1] = btv->crop[0]; /* current = default */ | |
| disclaim_vbi_lines(btv); | |
| disclaim_video_lines(btv); | |
| bttv_register_video(btv); | |
| } | |
| /* add subdevices and autoload dvb-bt8xx if needed */ | |
| if (bttv_tvcards[btv->c.type].has_dvb) { | |
| bttv_sub_add_device(&btv->c, "dvb"); | |
| request_modules(btv); | |
| } | |
| if (!disable_ir) { | |
| init_bttv_i2c_ir(btv); | |
| bttv_input_init(btv); | |
| } | |
| /* everything is fine */ | |
| bttv_num++; | |
| return 0; | |
| fail2: | |
| free_irq(btv->c.pci->irq,btv); | |
| fail1: | |
| v4l2_ctrl_handler_free(&btv->ctrl_handler); | |
| v4l2_ctrl_handler_free(&btv->radio_ctrl_handler); | |
| v4l2_device_unregister(&btv->c.v4l2_dev); | |
| fail0: | |
| if (btv->bt848_mmio) | |
| iounmap(btv->bt848_mmio); | |
| release_mem_region(pci_resource_start(btv->c.pci,0), | |
| pci_resource_len(btv->c.pci,0)); | |
| pci_disable_device(btv->c.pci); | |
| return result; | |
| } | |
| static void bttv_remove(struct pci_dev *pci_dev) | |
| { | |
| struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev); | |
| struct bttv *btv = to_bttv(v4l2_dev); | |
| if (bttv_verbose) | |
| pr_info("%d: unloading\n", btv->c.nr); | |
| if (bttv_tvcards[btv->c.type].has_dvb) | |
| flush_request_modules(btv); | |
| /* shutdown everything (DMA+IRQs) */ | |
| btand(~15, BT848_GPIO_DMA_CTL); | |
| btwrite(0, BT848_INT_MASK); | |
| btwrite(~0x0, BT848_INT_STAT); | |
| btwrite(0x0, BT848_GPIO_OUT_EN); | |
| if (bttv_gpio) | |
| bttv_gpio_tracking(btv,"cleanup"); | |
| /* tell gpio modules we are leaving ... */ | |
| btv->shutdown=1; | |
| bttv_input_fini(btv); | |
| bttv_sub_del_devices(&btv->c); | |
| /* unregister i2c_bus + input */ | |
| fini_bttv_i2c(btv); | |
| /* unregister video4linux */ | |
| bttv_unregister_video(btv); | |
| /* free allocated memory */ | |
| v4l2_ctrl_handler_free(&btv->ctrl_handler); | |
| v4l2_ctrl_handler_free(&btv->radio_ctrl_handler); | |
| btcx_riscmem_free(btv->c.pci,&btv->main); | |
| /* free resources */ | |
| free_irq(btv->c.pci->irq,btv); | |
| iounmap(btv->bt848_mmio); | |
| release_mem_region(pci_resource_start(btv->c.pci,0), | |
| pci_resource_len(btv->c.pci,0)); | |
| pci_disable_device(btv->c.pci); | |
| v4l2_device_unregister(&btv->c.v4l2_dev); | |
| bttvs[btv->c.nr] = NULL; | |
| kfree(btv); | |
| return; | |
| } | |
| #ifdef CONFIG_PM | |
| static int bttv_suspend(struct pci_dev *pci_dev, pm_message_t state) | |
| { | |
| struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev); | |
| struct bttv *btv = to_bttv(v4l2_dev); | |
| struct bttv_buffer_set idle; | |
| unsigned long flags; | |
| dprintk("%d: suspend %d\n", btv->c.nr, state.event); | |
| /* stop dma + irqs */ | |
| spin_lock_irqsave(&btv->s_lock,flags); | |
| memset(&idle, 0, sizeof(idle)); | |
| btv->state.video = btv->curr; | |
| btv->state.vbi = btv->cvbi; | |
| btv->state.loop_irq = btv->loop_irq; | |
| btv->curr = idle; | |
| btv->loop_irq = 0; | |
| bttv_buffer_activate_video(btv, &idle); | |
| bttv_buffer_activate_vbi(btv, NULL); | |
| bttv_set_dma(btv, 0); | |
| btwrite(0, BT848_INT_MASK); | |
| spin_unlock_irqrestore(&btv->s_lock,flags); | |
| /* save bt878 state */ | |
| btv->state.gpio_enable = btread(BT848_GPIO_OUT_EN); | |
| btv->state.gpio_data = gpio_read(); | |
| /* save pci state */ | |
| pci_save_state(pci_dev); | |
| if (0 != pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state))) { | |
| pci_disable_device(pci_dev); | |
| btv->state.disabled = 1; | |
| } | |
| return 0; | |
| } | |
| static int bttv_resume(struct pci_dev *pci_dev) | |
| { | |
| struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev); | |
| struct bttv *btv = to_bttv(v4l2_dev); | |
| unsigned long flags; | |
| int err; | |
| dprintk("%d: resume\n", btv->c.nr); | |
| /* restore pci state */ | |
| if (btv->state.disabled) { | |
| err=pci_enable_device(pci_dev); | |
| if (err) { | |
| pr_warn("%d: Can't enable device\n", btv->c.nr); | |
| return err; | |
| } | |
| btv->state.disabled = 0; | |
| } | |
| err=pci_set_power_state(pci_dev, PCI_D0); | |
| if (err) { | |
| pci_disable_device(pci_dev); | |
| pr_warn("%d: Can't enable device\n", btv->c.nr); | |
| btv->state.disabled = 1; | |
| return err; | |
| } | |
| pci_restore_state(pci_dev); | |
| /* restore bt878 state */ | |
| bttv_reinit_bt848(btv); | |
| gpio_inout(0xffffff, btv->state.gpio_enable); | |
| gpio_write(btv->state.gpio_data); | |
| /* restart dma */ | |
| spin_lock_irqsave(&btv->s_lock,flags); | |
| btv->curr = btv->state.video; | |
| btv->cvbi = btv->state.vbi; | |
| btv->loop_irq = btv->state.loop_irq; | |
| bttv_buffer_activate_video(btv, &btv->curr); | |
| bttv_buffer_activate_vbi(btv, btv->cvbi); | |
| bttv_set_dma(btv, 0); | |
| spin_unlock_irqrestore(&btv->s_lock,flags); | |
| return 0; | |
| } | |
| #endif | |
| static struct pci_device_id bttv_pci_tbl[] = { | |
| {PCI_VDEVICE(BROOKTREE, PCI_DEVICE_ID_BT848), 0}, | |
| {PCI_VDEVICE(BROOKTREE, PCI_DEVICE_ID_BT849), 0}, | |
| {PCI_VDEVICE(BROOKTREE, PCI_DEVICE_ID_BT878), 0}, | |
| {PCI_VDEVICE(BROOKTREE, PCI_DEVICE_ID_BT879), 0}, | |
| {PCI_VDEVICE(BROOKTREE, PCI_DEVICE_ID_FUSION879), 0}, | |
| {0,} | |
| }; | |
| MODULE_DEVICE_TABLE(pci, bttv_pci_tbl); | |
| static struct pci_driver bttv_pci_driver = { | |
| .name = "bttv", | |
| .id_table = bttv_pci_tbl, | |
| .probe = bttv_probe, | |
| .remove = bttv_remove, | |
| #ifdef CONFIG_PM | |
| .suspend = bttv_suspend, | |
| .resume = bttv_resume, | |
| #endif | |
| }; | |
| static int __init bttv_init_module(void) | |
| { | |
| int ret; | |
| bttv_num = 0; | |
| pr_info("driver version %s loaded\n", BTTV_VERSION); | |
| if (gbuffers < 2 || gbuffers > VIDEO_MAX_FRAME) | |
| gbuffers = 2; | |
| if (gbufsize > BTTV_MAX_FBUF) | |
| gbufsize = BTTV_MAX_FBUF; | |
| gbufsize = (gbufsize + PAGE_SIZE - 1) & PAGE_MASK; | |
| if (bttv_verbose) | |
| pr_info("using %d buffers with %dk (%d pages) each for capture\n", | |
| gbuffers, gbufsize >> 10, gbufsize >> PAGE_SHIFT); | |
| bttv_check_chipset(); | |
| ret = bus_register(&bttv_sub_bus_type); | |
| if (ret < 0) { | |
| pr_warn("bus_register error: %d\n", ret); | |
| return ret; | |
| } | |
| ret = pci_register_driver(&bttv_pci_driver); | |
| if (ret < 0) | |
| bus_unregister(&bttv_sub_bus_type); | |
| return ret; | |
| } | |
| static void __exit bttv_cleanup_module(void) | |
| { | |
| pci_unregister_driver(&bttv_pci_driver); | |
| bus_unregister(&bttv_sub_bus_type); | |
| } | |
| module_init(bttv_init_module); | |
| module_exit(bttv_cleanup_module); |