| /* | |
| * Driver for the Conexant CX23885 PCIe bridge | |
| * | |
| * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * | |
| * GNU General Public License for more details. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/init.h> | |
| #include <linux/delay.h> | |
| #include <asm/io.h> | |
| #include "cx23885.h" | |
| #include <media/v4l2-common.h> | |
| static unsigned int i2c_debug; | |
| module_param(i2c_debug, int, 0644); | |
| MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]"); | |
| static unsigned int i2c_scan; | |
| module_param(i2c_scan, int, 0444); | |
| MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time"); | |
| #define dprintk(level, fmt, arg...)\ | |
| do { if (i2c_debug >= level)\ | |
| printk(KERN_DEBUG "%s/0: " fmt, dev->name, ## arg);\ | |
| } while (0) | |
| #define I2C_WAIT_DELAY 32 | |
| #define I2C_WAIT_RETRY 64 | |
| #define I2C_EXTEND (1 << 3) | |
| #define I2C_NOSTOP (1 << 4) | |
| static inline int i2c_slave_did_ack(struct i2c_adapter *i2c_adap) | |
| { | |
| struct cx23885_i2c *bus = i2c_adap->algo_data; | |
| struct cx23885_dev *dev = bus->dev; | |
| return cx_read(bus->reg_stat) & 0x01; | |
| } | |
| static inline int i2c_is_busy(struct i2c_adapter *i2c_adap) | |
| { | |
| struct cx23885_i2c *bus = i2c_adap->algo_data; | |
| struct cx23885_dev *dev = bus->dev; | |
| return cx_read(bus->reg_stat) & 0x02 ? 1 : 0; | |
| } | |
| static int i2c_wait_done(struct i2c_adapter *i2c_adap) | |
| { | |
| int count; | |
| for (count = 0; count < I2C_WAIT_RETRY; count++) { | |
| if (!i2c_is_busy(i2c_adap)) | |
| break; | |
| udelay(I2C_WAIT_DELAY); | |
| } | |
| if (I2C_WAIT_RETRY == count) | |
| return 0; | |
| return 1; | |
| } | |
| static int i2c_sendbytes(struct i2c_adapter *i2c_adap, | |
| const struct i2c_msg *msg, int joined_rlen) | |
| { | |
| struct cx23885_i2c *bus = i2c_adap->algo_data; | |
| struct cx23885_dev *dev = bus->dev; | |
| u32 wdata, addr, ctrl; | |
| int retval, cnt; | |
| if (joined_rlen) | |
| dprintk(1, "%s(msg->wlen=%d, nextmsg->rlen=%d)\n", __func__, | |
| msg->len, joined_rlen); | |
| else | |
| dprintk(1, "%s(msg->len=%d)\n", __func__, msg->len); | |
| /* Deal with i2c probe functions with zero payload */ | |
| if (msg->len == 0) { | |
| cx_write(bus->reg_addr, msg->addr << 25); | |
| cx_write(bus->reg_ctrl, bus->i2c_period | (1 << 2)); | |
| if (!i2c_wait_done(i2c_adap)) | |
| return -EIO; | |
| if (!i2c_slave_did_ack(i2c_adap)) | |
| return -ENXIO; | |
| dprintk(1, "%s() returns 0\n", __func__); | |
| return 0; | |
| } | |
| /* dev, reg + first byte */ | |
| addr = (msg->addr << 25) | msg->buf[0]; | |
| wdata = msg->buf[0]; | |
| ctrl = bus->i2c_period | (1 << 12) | (1 << 2); | |
| if (msg->len > 1) | |
| ctrl |= I2C_NOSTOP | I2C_EXTEND; | |
| else if (joined_rlen) | |
| ctrl |= I2C_NOSTOP; | |
| cx_write(bus->reg_addr, addr); | |
| cx_write(bus->reg_wdata, wdata); | |
| cx_write(bus->reg_ctrl, ctrl); | |
| if (!i2c_wait_done(i2c_adap)) | |
| goto eio; | |
| if (i2c_debug) { | |
| printk(" <W %02x %02x", msg->addr << 1, msg->buf[0]); | |
| if (!(ctrl & I2C_NOSTOP)) | |
| printk(" >\n"); | |
| } | |
| for (cnt = 1; cnt < msg->len; cnt++) { | |
| /* following bytes */ | |
| wdata = msg->buf[cnt]; | |
| ctrl = bus->i2c_period | (1 << 12) | (1 << 2); | |
| if (cnt < msg->len - 1) | |
| ctrl |= I2C_NOSTOP | I2C_EXTEND; | |
| else if (joined_rlen) | |
| ctrl |= I2C_NOSTOP; | |
| cx_write(bus->reg_addr, addr); | |
| cx_write(bus->reg_wdata, wdata); | |
| cx_write(bus->reg_ctrl, ctrl); | |
| if (!i2c_wait_done(i2c_adap)) | |
| goto eio; | |
| if (i2c_debug) { | |
| dprintk(1, " %02x", msg->buf[cnt]); | |
| if (!(ctrl & I2C_NOSTOP)) | |
| dprintk(1, " >\n"); | |
| } | |
| } | |
| return msg->len; | |
| eio: | |
| retval = -EIO; | |
| if (i2c_debug) | |
| printk(KERN_ERR " ERR: %d\n", retval); | |
| return retval; | |
| } | |
| static int i2c_readbytes(struct i2c_adapter *i2c_adap, | |
| const struct i2c_msg *msg, int joined) | |
| { | |
| struct cx23885_i2c *bus = i2c_adap->algo_data; | |
| struct cx23885_dev *dev = bus->dev; | |
| u32 ctrl, cnt; | |
| int retval; | |
| if (i2c_debug && !joined) | |
| dprintk(1, "%s(msg->len=%d)\n", __func__, msg->len); | |
| /* Deal with i2c probe functions with zero payload */ | |
| if (msg->len == 0) { | |
| cx_write(bus->reg_addr, msg->addr << 25); | |
| cx_write(bus->reg_ctrl, bus->i2c_period | (1 << 2) | 1); | |
| if (!i2c_wait_done(i2c_adap)) | |
| return -EIO; | |
| if (!i2c_slave_did_ack(i2c_adap)) | |
| return -ENXIO; | |
| dprintk(1, "%s() returns 0\n", __func__); | |
| return 0; | |
| } | |
| if (i2c_debug) { | |
| if (joined) | |
| dprintk(1, " R"); | |
| else | |
| dprintk(1, " <R %02x", (msg->addr << 1) + 1); | |
| } | |
| for (cnt = 0; cnt < msg->len; cnt++) { | |
| ctrl = bus->i2c_period | (1 << 12) | (1 << 2) | 1; | |
| if (cnt < msg->len - 1) | |
| ctrl |= I2C_NOSTOP | I2C_EXTEND; | |
| cx_write(bus->reg_addr, msg->addr << 25); | |
| cx_write(bus->reg_ctrl, ctrl); | |
| if (!i2c_wait_done(i2c_adap)) | |
| goto eio; | |
| msg->buf[cnt] = cx_read(bus->reg_rdata) & 0xff; | |
| if (i2c_debug) { | |
| dprintk(1, " %02x", msg->buf[cnt]); | |
| if (!(ctrl & I2C_NOSTOP)) | |
| dprintk(1, " >\n"); | |
| } | |
| } | |
| return msg->len; | |
| eio: | |
| retval = -EIO; | |
| if (i2c_debug) | |
| printk(KERN_ERR " ERR: %d\n", retval); | |
| return retval; | |
| } | |
| static int i2c_xfer(struct i2c_adapter *i2c_adap, | |
| struct i2c_msg *msgs, int num) | |
| { | |
| struct cx23885_i2c *bus = i2c_adap->algo_data; | |
| struct cx23885_dev *dev = bus->dev; | |
| int i, retval = 0; | |
| dprintk(1, "%s(num = %d)\n", __func__, num); | |
| for (i = 0 ; i < num; i++) { | |
| dprintk(1, "%s(num = %d) addr = 0x%02x len = 0x%x\n", | |
| __func__, num, msgs[i].addr, msgs[i].len); | |
| if (msgs[i].flags & I2C_M_RD) { | |
| /* read */ | |
| retval = i2c_readbytes(i2c_adap, &msgs[i], 0); | |
| } else if (i + 1 < num && (msgs[i + 1].flags & I2C_M_RD) && | |
| msgs[i].addr == msgs[i + 1].addr) { | |
| /* write then read from same address */ | |
| retval = i2c_sendbytes(i2c_adap, &msgs[i], | |
| msgs[i + 1].len); | |
| if (retval < 0) | |
| goto err; | |
| i++; | |
| retval = i2c_readbytes(i2c_adap, &msgs[i], 1); | |
| } else { | |
| /* write */ | |
| retval = i2c_sendbytes(i2c_adap, &msgs[i], 0); | |
| } | |
| if (retval < 0) | |
| goto err; | |
| } | |
| return num; | |
| err: | |
| return retval; | |
| } | |
| static u32 cx23885_functionality(struct i2c_adapter *adap) | |
| { | |
| return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C; | |
| } | |
| static const struct i2c_algorithm cx23885_i2c_algo_template = { | |
| .master_xfer = i2c_xfer, | |
| .functionality = cx23885_functionality, | |
| }; | |
| /* ----------------------------------------------------------------------- */ | |
| static struct i2c_adapter cx23885_i2c_adap_template = { | |
| .name = "cx23885", | |
| .owner = THIS_MODULE, | |
| .algo = &cx23885_i2c_algo_template, | |
| }; | |
| static struct i2c_client cx23885_i2c_client_template = { | |
| .name = "cx23885 internal", | |
| }; | |
| static char *i2c_devs[128] = { | |
| [0x10 >> 1] = "tda10048", | |
| [0x12 >> 1] = "dib7000pc", | |
| [0x1c >> 1] = "lgdt3303", | |
| [0x80 >> 1] = "cs3308", | |
| [0x82 >> 1] = "cs3308", | |
| [0x86 >> 1] = "tda9887", | |
| [0x32 >> 1] = "cx24227", | |
| [0x88 >> 1] = "cx25837", | |
| [0x84 >> 1] = "tda8295", | |
| [0x98 >> 1] = "flatiron", | |
| [0xa0 >> 1] = "eeprom", | |
| [0xc0 >> 1] = "tuner/mt2131/tda8275", | |
| [0xc2 >> 1] = "tuner/mt2131/tda8275/xc5000/xc3028", | |
| [0xc8 >> 1] = "tuner/xc3028L", | |
| }; | |
| static void do_i2c_scan(char *name, struct i2c_client *c) | |
| { | |
| unsigned char buf; | |
| int i, rc; | |
| for (i = 0; i < 128; i++) { | |
| c->addr = i; | |
| rc = i2c_master_recv(c, &buf, 0); | |
| if (rc < 0) | |
| continue; | |
| printk(KERN_INFO "%s: i2c scan: found device @ 0x%04x [%s]\n", | |
| name, i, i2c_devs[i] ? i2c_devs[i] : "???"); | |
| } | |
| } | |
| /* init + register i2c adapter */ | |
| int cx23885_i2c_register(struct cx23885_i2c *bus) | |
| { | |
| struct cx23885_dev *dev = bus->dev; | |
| dprintk(1, "%s(bus = %d)\n", __func__, bus->nr); | |
| bus->i2c_adap = cx23885_i2c_adap_template; | |
| bus->i2c_client = cx23885_i2c_client_template; | |
| bus->i2c_adap.dev.parent = &dev->pci->dev; | |
| strlcpy(bus->i2c_adap.name, bus->dev->name, | |
| sizeof(bus->i2c_adap.name)); | |
| bus->i2c_adap.algo_data = bus; | |
| i2c_set_adapdata(&bus->i2c_adap, &dev->v4l2_dev); | |
| i2c_add_adapter(&bus->i2c_adap); | |
| bus->i2c_client.adapter = &bus->i2c_adap; | |
| if (0 == bus->i2c_rc) { | |
| dprintk(1, "%s: i2c bus %d registered\n", dev->name, bus->nr); | |
| if (i2c_scan) { | |
| printk(KERN_INFO "%s: scan bus %d:\n", | |
| dev->name, bus->nr); | |
| do_i2c_scan(dev->name, &bus->i2c_client); | |
| } | |
| } else | |
| printk(KERN_WARNING "%s: i2c bus %d register FAILED\n", | |
| dev->name, bus->nr); | |
| /* Instantiate the IR receiver device, if present */ | |
| if (0 == bus->i2c_rc) { | |
| struct i2c_board_info info; | |
| const unsigned short addr_list[] = { | |
| 0x6b, I2C_CLIENT_END | |
| }; | |
| memset(&info, 0, sizeof(struct i2c_board_info)); | |
| strlcpy(info.type, "ir_video", I2C_NAME_SIZE); | |
| /* Use quick read command for probe, some IR chips don't | |
| * support writes */ | |
| i2c_new_probed_device(&bus->i2c_adap, &info, addr_list, | |
| i2c_probe_func_quick_read); | |
| } | |
| return bus->i2c_rc; | |
| } | |
| int cx23885_i2c_unregister(struct cx23885_i2c *bus) | |
| { | |
| i2c_del_adapter(&bus->i2c_adap); | |
| return 0; | |
| } | |
| void cx23885_av_clk(struct cx23885_dev *dev, int enable) | |
| { | |
| /* write 0 to bus 2 addr 0x144 via i2x_xfer() */ | |
| char buffer[3]; | |
| struct i2c_msg msg; | |
| dprintk(1, "%s(enabled = %d)\n", __func__, enable); | |
| /* Register 0x144 */ | |
| buffer[0] = 0x01; | |
| buffer[1] = 0x44; | |
| if (enable == 1) | |
| buffer[2] = 0x05; | |
| else | |
| buffer[2] = 0x00; | |
| msg.addr = 0x44; | |
| msg.flags = I2C_M_TEN; | |
| msg.len = 3; | |
| msg.buf = buffer; | |
| i2c_xfer(&dev->i2c_bus[2].i2c_adap, &msg, 1); | |
| } |