| /* | |
| Mantis PCI bridge driver | |
| Copyright (C) Manu Abraham (abraham.manu@gmail.com) | |
| This program is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 2 of the License, or | |
| (at your option) any later version. | |
| This program is distributed in the hope that it will be useful, | |
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| GNU General Public License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with this program; if not, write to the Free Software | |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/i2c.h> | |
| #include <linux/signal.h> | |
| #include <linux/sched.h> | |
| #include <linux/interrupt.h> | |
| #include <asm/io.h> | |
| #include "dmxdev.h" | |
| #include "dvbdev.h" | |
| #include "dvb_demux.h" | |
| #include "dvb_frontend.h" | |
| #include "dvb_net.h" | |
| #include "mantis_common.h" | |
| #include "mantis_reg.h" | |
| #include "mantis_ioc.h" | |
| static int read_eeprom_bytes(struct mantis_pci *mantis, u8 reg, u8 *data, u8 length) | |
| { | |
| struct i2c_adapter *adapter = &mantis->adapter; | |
| int err; | |
| u8 buf = reg; | |
| struct i2c_msg msg[] = { | |
| { .addr = 0x50, .flags = 0, .buf = &buf, .len = 1 }, | |
| { .addr = 0x50, .flags = I2C_M_RD, .buf = data, .len = length }, | |
| }; | |
| err = i2c_transfer(adapter, msg, 2); | |
| if (err < 0) { | |
| dprintk(MANTIS_ERROR, 1, "ERROR: i2c read: < err=%i d0=0x%02x d1=0x%02x >", | |
| err, data[0], data[1]); | |
| return err; | |
| } | |
| return 0; | |
| } | |
| int mantis_get_mac(struct mantis_pci *mantis) | |
| { | |
| int err; | |
| u8 mac_addr[6] = {0}; | |
| err = read_eeprom_bytes(mantis, 0x08, mac_addr, 6); | |
| if (err < 0) { | |
| dprintk(MANTIS_ERROR, 1, "ERROR: Mantis EEPROM read error <%d>", err); | |
| return err; | |
| } | |
| dprintk(MANTIS_ERROR, 0, " MAC Address=[%pM]\n", mac_addr); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(mantis_get_mac); | |
| /* Turn the given bit on or off. */ | |
| void mantis_gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value) | |
| { | |
| u32 cur; | |
| dprintk(MANTIS_DEBUG, 1, "Set Bit <%d> to <%d>", bitpos, value); | |
| cur = mmread(MANTIS_GPIF_ADDR); | |
| if (value) | |
| mantis->gpio_status = cur | (1 << bitpos); | |
| else | |
| mantis->gpio_status = cur & (~(1 << bitpos)); | |
| dprintk(MANTIS_DEBUG, 1, "GPIO Value <%02x>", mantis->gpio_status); | |
| mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR); | |
| mmwrite(0x00, MANTIS_GPIF_DOUT); | |
| } | |
| EXPORT_SYMBOL_GPL(mantis_gpio_set_bits); | |
| int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl) | |
| { | |
| u32 reg; | |
| reg = mmread(MANTIS_CONTROL); | |
| switch (stream_ctl) { | |
| case STREAM_TO_HIF: | |
| dprintk(MANTIS_DEBUG, 1, "Set stream to HIF"); | |
| reg &= 0xff - MANTIS_BYPASS; | |
| mmwrite(reg, MANTIS_CONTROL); | |
| reg |= MANTIS_BYPASS; | |
| mmwrite(reg, MANTIS_CONTROL); | |
| break; | |
| case STREAM_TO_CAM: | |
| dprintk(MANTIS_DEBUG, 1, "Set stream to CAM"); | |
| reg |= MANTIS_BYPASS; | |
| mmwrite(reg, MANTIS_CONTROL); | |
| reg &= 0xff - MANTIS_BYPASS; | |
| mmwrite(reg, MANTIS_CONTROL); | |
| break; | |
| default: | |
| dprintk(MANTIS_ERROR, 1, "Unknown MODE <%02x>", stream_ctl); | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(mantis_stream_control); |