| /* | |
| * Earthsoft PT3 driver | |
| * | |
| * Copyright (C) 2014 Akihiro Tsukada <tskd08@gmail.com> | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation version 2. | |
| * | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| */ | |
| #ifndef PT3_H | |
| #define PT3_H | |
| #include <linux/atomic.h> | |
| #include <linux/types.h> | |
| #include "dvb_demux.h" | |
| #include "dvb_frontend.h" | |
| #include "dmxdev.h" | |
| #include "tc90522.h" | |
| #include "mxl301rf.h" | |
| #include "qm1d1c0042.h" | |
| #define DRV_NAME KBUILD_MODNAME | |
| #define PT3_NUM_FE 4 | |
| /* | |
| * register index of the FPGA chip | |
| */ | |
| #define REG_VERSION 0x00 | |
| #define REG_BUS 0x04 | |
| #define REG_SYSTEM_W 0x08 | |
| #define REG_SYSTEM_R 0x0c | |
| #define REG_I2C_W 0x10 | |
| #define REG_I2C_R 0x14 | |
| #define REG_RAM_W 0x18 | |
| #define REG_RAM_R 0x1c | |
| #define REG_DMA_BASE 0x40 /* regs for FE[i] = REG_DMA_BASE + 0x18 * i */ | |
| #define OFST_DMA_DESC_L 0x00 | |
| #define OFST_DMA_DESC_H 0x04 | |
| #define OFST_DMA_CTL 0x08 | |
| #define OFST_TS_CTL 0x0c | |
| #define OFST_STATUS 0x10 | |
| #define OFST_TS_ERR 0x14 | |
| /* | |
| * internal buffer for I2C | |
| */ | |
| #define PT3_I2C_MAX 4091 | |
| struct pt3_i2cbuf { | |
| u8 data[PT3_I2C_MAX]; | |
| u8 tmp; | |
| u32 num_cmds; | |
| }; | |
| /* | |
| * DMA things | |
| */ | |
| #define TS_PACKET_SZ 188 | |
| /* DMA transfers must not cross 4GiB, so use one page / transfer */ | |
| #define DATA_XFER_SZ 4096 | |
| #define DATA_BUF_XFERS 47 | |
| /* (num_bufs * DATA_BUF_SZ) % TS_PACKET_SZ must be 0 */ | |
| #define DATA_BUF_SZ (DATA_BUF_XFERS * DATA_XFER_SZ) | |
| #define MAX_DATA_BUFS 16 | |
| #define MIN_DATA_BUFS 2 | |
| #define DESCS_IN_PAGE (PAGE_SIZE / sizeof(struct xfer_desc)) | |
| #define MAX_NUM_XFERS (MAX_DATA_BUFS * DATA_BUF_XFERS) | |
| #define MAX_DESC_BUFS DIV_ROUND_UP(MAX_NUM_XFERS, DESCS_IN_PAGE) | |
| /* DMA transfer description. | |
| * device is passed a pointer to this struct, dma-reads it, | |
| * and gets the DMA buffer ring for storing TS data. | |
| */ | |
| struct xfer_desc { | |
| u32 addr_l; /* bus address of target data buffer */ | |
| u32 addr_h; | |
| u32 size; | |
| u32 next_l; /* bus adddress of the next xfer_desc */ | |
| u32 next_h; | |
| }; | |
| /* A DMA mapping of a page containing xfer_desc's */ | |
| struct xfer_desc_buffer { | |
| dma_addr_t b_addr; | |
| struct xfer_desc *descs; /* PAGE_SIZE (xfer_desc[DESCS_IN_PAGE]) */ | |
| }; | |
| /* A DMA mapping of a data buffer */ | |
| struct dma_data_buffer { | |
| dma_addr_t b_addr; | |
| u8 *data; /* size: u8[PAGE_SIZE] */ | |
| }; | |
| /* | |
| * device things | |
| */ | |
| struct pt3_adap_config { | |
| struct i2c_board_info demod_info; | |
| struct tc90522_config demod_cfg; | |
| struct i2c_board_info tuner_info; | |
| union tuner_config { | |
| struct qm1d1c0042_config qm1d1c0042; | |
| struct mxl301rf_config mxl301rf; | |
| } tuner_cfg; | |
| u32 init_freq; | |
| }; | |
| struct pt3_adapter { | |
| struct dvb_adapter dvb_adap; /* dvb_adap.priv => struct pt3_board */ | |
| int adap_idx; | |
| struct dvb_demux demux; | |
| struct dmxdev dmxdev; | |
| struct dvb_frontend *fe; | |
| struct i2c_client *i2c_demod; | |
| struct i2c_client *i2c_tuner; | |
| /* data fetch thread */ | |
| struct task_struct *thread; | |
| int num_feeds; | |
| bool cur_lna; | |
| bool cur_lnb; /* current LNB power status (on/off) */ | |
| /* items below are for DMA */ | |
| struct dma_data_buffer buffer[MAX_DATA_BUFS]; | |
| int buf_idx; | |
| int buf_ofs; | |
| int num_bufs; /* == pt3_board->num_bufs */ | |
| int num_discard; /* how many access units to discard initially */ | |
| struct xfer_desc_buffer desc_buf[MAX_DESC_BUFS]; | |
| int num_desc_bufs; /* == num_bufs * DATA_BUF_XFERS / DESCS_IN_PAGE */ | |
| }; | |
| struct pt3_board { | |
| struct pci_dev *pdev; | |
| void __iomem *regs[2]; | |
| /* regs[0]: registers, regs[1]: internal memory, used for I2C */ | |
| struct mutex lock; | |
| /* LNB power shared among sat-FEs */ | |
| int lnb_on_cnt; /* LNB power on count */ | |
| /* LNA shared among terr-FEs */ | |
| int lna_on_cnt; /* booster enabled count */ | |
| int num_bufs; /* number of DMA buffers allocated/mapped per FE */ | |
| struct i2c_adapter i2c_adap; | |
| struct pt3_i2cbuf *i2c_buf; | |
| struct pt3_adapter *adaps[PT3_NUM_FE]; | |
| }; | |
| /* | |
| * prototypes | |
| */ | |
| extern int pt3_alloc_dmabuf(struct pt3_adapter *adap); | |
| extern void pt3_init_dmabuf(struct pt3_adapter *adap); | |
| extern void pt3_free_dmabuf(struct pt3_adapter *adap); | |
| extern int pt3_start_dma(struct pt3_adapter *adap); | |
| extern int pt3_stop_dma(struct pt3_adapter *adap); | |
| extern int pt3_proc_dma(struct pt3_adapter *adap); | |
| extern int pt3_i2c_master_xfer(struct i2c_adapter *adap, | |
| struct i2c_msg *msgs, int num); | |
| extern u32 pt3_i2c_functionality(struct i2c_adapter *adap); | |
| extern void pt3_i2c_reset(struct pt3_board *pt3); | |
| extern int pt3_init_all_demods(struct pt3_board *pt3); | |
| extern int pt3_init_all_mxl301rf(struct pt3_board *pt3); | |
| #endif /* PT3_H */ |