| # | |
| # Platform drivers | |
| # Most drivers here are currently for webcam support | |
| menuconfig V4L_PLATFORM_DRIVERS | |
| bool "V4L platform devices" | |
| depends on MEDIA_CAMERA_SUPPORT | |
| default n | |
| ---help--- | |
| Say Y here to enable support for platform-specific V4L drivers. | |
| if V4L_PLATFORM_DRIVERS | |
| source "drivers/media/platform/marvell-ccic/Kconfig" | |
| config VIDEO_VIA_CAMERA | |
| tristate "VIAFB camera controller support" | |
| depends on FB_VIA | |
| select VIDEOBUF_DMA_SG | |
| select VIDEO_OV7670 | |
| help | |
| Driver support for the integrated camera controller in VIA | |
| Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems | |
| with ov7670 sensors. | |
| # | |
| # Platform multimedia device configuration | |
| # | |
| source "drivers/media/platform/davinci/Kconfig" | |
| source "drivers/media/platform/omap/Kconfig" | |
| source "drivers/media/platform/blackfin/Kconfig" | |
| config VIDEO_SH_VOU | |
| tristate "SuperH VOU video output driver" | |
| depends on MEDIA_CAMERA_SUPPORT | |
| depends on VIDEO_DEV && I2C && HAS_DMA | |
| depends on ARCH_SHMOBILE || COMPILE_TEST | |
| select VIDEOBUF2_DMA_CONTIG | |
| help | |
| Support for the Video Output Unit (VOU) on SuperH SoCs. | |
| config VIDEO_VIU | |
| tristate "Freescale VIU Video Driver" | |
| depends on VIDEO_V4L2 && PPC_MPC512x | |
| select VIDEOBUF_DMA_CONTIG | |
| default y | |
| ---help--- | |
| Support for Freescale VIU video driver. This device captures | |
| video data, or overlays video on DIU frame buffer. | |
| Say Y here if you want to enable VIU device on MPC5121e Rev2+. | |
| In doubt, say N. | |
| config VIDEO_M32R_AR | |
| tristate "AR devices" | |
| depends on VIDEO_V4L2 | |
| depends on M32R || COMPILE_TEST | |
| ---help--- | |
| This is a video4linux driver for the Renesas AR (Artificial Retina) | |
| camera module. | |
| config VIDEO_M32R_AR_M64278 | |
| tristate "AR device with color module M64278(VGA)" | |
| depends on PLAT_M32700UT | |
| select VIDEO_M32R_AR | |
| ---help--- | |
| This is a video4linux driver for the Renesas AR (Artificial | |
| Retina) with M64278E-800 camera module. | |
| This module supports VGA(640x480 pixels) resolutions. | |
| To compile this driver as a module, choose M here: the | |
| module will be called arv. | |
| config VIDEO_OMAP3 | |
| tristate "OMAP 3 Camera support" | |
| depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3 | |
| depends on HAS_DMA && OF | |
| depends on OMAP_IOMMU | |
| select ARM_DMA_USE_IOMMU | |
| select VIDEOBUF2_DMA_CONTIG | |
| select MFD_SYSCON | |
| ---help--- | |
| Driver for an OMAP 3 camera controller. | |
| config VIDEO_OMAP3_DEBUG | |
| bool "OMAP 3 Camera debug messages" | |
| depends on VIDEO_OMAP3 | |
| ---help--- | |
| Enable debug messages on OMAP 3 camera controller driver. | |
| config VIDEO_PXA27x | |
| tristate "PXA27x Quick Capture Interface driver" | |
| depends on VIDEO_DEV && HAS_DMA | |
| depends on PXA27x || COMPILE_TEST | |
| select VIDEOBUF2_DMA_SG | |
| select SG_SPLIT | |
| ---help--- | |
| This is a v4l2 driver for the PXA27x Quick Capture Interface | |
| config VIDEO_S3C_CAMIF | |
| tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver" | |
| depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API | |
| depends on PM | |
| depends on ARCH_S3C64XX || PLAT_S3C24XX || COMPILE_TEST | |
| depends on HAS_DMA | |
| select VIDEOBUF2_DMA_CONTIG | |
| ---help--- | |
| This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera | |
| host interface (CAMIF). | |
| To compile this driver as a module, choose M here: the module | |
| will be called s3c-camif. | |
| source "drivers/media/platform/soc_camera/Kconfig" | |
| source "drivers/media/platform/exynos4-is/Kconfig" | |
| source "drivers/media/platform/am437x/Kconfig" | |
| source "drivers/media/platform/xilinx/Kconfig" | |
| source "drivers/media/platform/rcar-vin/Kconfig" | |
| source "drivers/media/platform/atmel/Kconfig" | |
| config VIDEO_TI_CAL | |
| tristate "TI CAL (Camera Adaptation Layer) driver" | |
| depends on VIDEO_DEV && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
| depends on SOC_DRA7XX || COMPILE_TEST | |
| depends on HAS_DMA | |
| select VIDEOBUF2_DMA_CONTIG | |
| default n | |
| ---help--- | |
| Support for the TI CAL (Camera Adaptation Layer) block | |
| found on DRA72X SoC. | |
| In TI Technical Reference Manual this module is referred as | |
| Camera Interface Subsystem (CAMSS). | |
| endif # V4L_PLATFORM_DRIVERS | |
| menuconfig V4L_MEM2MEM_DRIVERS | |
| bool "Memory-to-memory multimedia devices" | |
| depends on VIDEO_V4L2 | |
| depends on MEDIA_CAMERA_SUPPORT | |
| default n | |
| ---help--- | |
| Say Y here to enable selecting drivers for V4L devices that | |
| use system memory for both source and destination buffers, as opposed | |
| to capture and output drivers, which use memory buffers for just | |
| one of those. | |
| if V4L_MEM2MEM_DRIVERS | |
| config VIDEO_CODA | |
| tristate "Chips&Media Coda multi-standard codec IP" | |
| depends on VIDEO_DEV && VIDEO_V4L2 && ARCH_MXC | |
| depends on HAS_DMA | |
| select SRAM | |
| select VIDEOBUF2_DMA_CONTIG | |
| select VIDEOBUF2_VMALLOC | |
| select V4L2_MEM2MEM_DEV | |
| select GENERIC_ALLOCATOR | |
| ---help--- | |
| Coda is a range of video codec IPs that supports | |
| H.264, MPEG-4, and other video formats. | |
| config VIDEO_MEDIATEK_VPU | |
| tristate "Mediatek Video Processor Unit" | |
| depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA | |
| depends on ARCH_MEDIATEK || COMPILE_TEST | |
| ---help--- | |
| This driver provides downloading VPU firmware and | |
| communicating with VPU. This driver for hw video | |
| codec embedded in Mediatek's MT8173 SOCs. It is able | |
| to handle video decoding/encoding in a range of formats. | |
| To compile this driver as a module, choose M here: the | |
| module will be called mtk-vpu. | |
| config VIDEO_MEDIATEK_VCODEC | |
| tristate "Mediatek Video Codec driver" | |
| depends on MTK_IOMMU || COMPILE_TEST | |
| depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA | |
| depends on ARCH_MEDIATEK || COMPILE_TEST | |
| select VIDEOBUF2_DMA_CONTIG | |
| select V4L2_MEM2MEM_DEV | |
| select VIDEO_MEDIATEK_VPU | |
| default n | |
| ---help--- | |
| Mediatek video codec driver provides HW capability to | |
| encode and decode in a range of video formats | |
| This driver rely on VPU driver to communicate with VPU. | |
| To compile this driver as a module, choose M here: the | |
| module will be called mtk-vcodec | |
| config VIDEO_MEM2MEM_DEINTERLACE | |
| tristate "Deinterlace support" | |
| depends on VIDEO_DEV && VIDEO_V4L2 && DMA_ENGINE | |
| depends on HAS_DMA | |
| select VIDEOBUF2_DMA_CONTIG | |
| select V4L2_MEM2MEM_DEV | |
| help | |
| Generic deinterlacing V4L2 driver. | |
| config VIDEO_SAMSUNG_S5P_G2D | |
| tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver" | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST | |
| depends on HAS_DMA | |
| select VIDEOBUF2_DMA_CONTIG | |
| select V4L2_MEM2MEM_DEV | |
| default n | |
| ---help--- | |
| This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D | |
| 2d graphics accelerator. | |
| config VIDEO_SAMSUNG_S5P_JPEG | |
| tristate "Samsung S5P/Exynos3250/Exynos4 JPEG codec driver" | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST | |
| depends on HAS_DMA | |
| select VIDEOBUF2_DMA_CONTIG | |
| select V4L2_MEM2MEM_DEV | |
| ---help--- | |
| This is a v4l2 driver for Samsung S5P, EXYNOS3250 | |
| and EXYNOS4 JPEG codec | |
| config VIDEO_SAMSUNG_S5P_MFC | |
| tristate "Samsung S5P MFC Video Codec" | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST | |
| depends on HAS_DMA | |
| select VIDEOBUF2_DMA_CONTIG | |
| default n | |
| help | |
| MFC 5.1 and 6.x driver for V4L2 | |
| config VIDEO_MX2_EMMAPRP | |
| tristate "MX2 eMMa-PrP support" | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| depends on SOC_IMX27 || COMPILE_TEST | |
| depends on HAS_DMA | |
| select VIDEOBUF2_DMA_CONTIG | |
| select V4L2_MEM2MEM_DEV | |
| help | |
| MX2X chips have a PrP that can be used to process buffers from | |
| memory to memory. Operations include resizing and format | |
| conversion. | |
| config VIDEO_SAMSUNG_EXYNOS_GSC | |
| tristate "Samsung Exynos G-Scaler driver" | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| depends on ARCH_EXYNOS5 || COMPILE_TEST | |
| depends on HAS_DMA | |
| select VIDEOBUF2_DMA_CONTIG | |
| select V4L2_MEM2MEM_DEV | |
| help | |
| This is a v4l2 driver for Samsung EXYNOS5 SoC G-Scaler. | |
| config VIDEO_STI_BDISP | |
| tristate "STMicroelectronics BDISP 2D blitter driver" | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| depends on HAS_DMA | |
| depends on ARCH_STI || COMPILE_TEST | |
| select VIDEOBUF2_DMA_CONTIG | |
| select V4L2_MEM2MEM_DEV | |
| help | |
| This v4l2 mem2mem driver is a 2D blitter for STMicroelectronics SoC. | |
| config VIDEO_STI_HVA | |
| tristate "STMicroelectronics HVA multi-format video encoder V4L2 driver" | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| depends on HAS_DMA | |
| depends on ARCH_STI || COMPILE_TEST | |
| select VIDEOBUF2_DMA_CONTIG | |
| select V4L2_MEM2MEM_DEV | |
| help | |
| This V4L2 driver enables HVA (Hardware Video Accelerator) multi-format | |
| video encoder of STMicroelectronics SoC, allowing hardware encoding of | |
| raw uncompressed formats in various compressed video bitstreams format. | |
| To compile this driver as a module, choose M here: | |
| the module will be called st-hva. | |
| config VIDEO_SH_VEU | |
| tristate "SuperH VEU mem2mem video processing driver" | |
| depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA | |
| select VIDEOBUF2_DMA_CONTIG | |
| select V4L2_MEM2MEM_DEV | |
| help | |
| Support for the Video Engine Unit (VEU) on SuperH and | |
| SH-Mobile SoCs. | |
| config VIDEO_RENESAS_JPU | |
| tristate "Renesas JPEG Processing Unit" | |
| depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA | |
| depends on ARCH_RENESAS || COMPILE_TEST | |
| select VIDEOBUF2_DMA_CONTIG | |
| select V4L2_MEM2MEM_DEV | |
| ---help--- | |
| This is a V4L2 driver for the Renesas JPEG Processing Unit. | |
| To compile this driver as a module, choose M here: the module | |
| will be called rcar_jpu. | |
| config VIDEO_RENESAS_FCP | |
| tristate "Renesas Frame Compression Processor" | |
| depends on ARCH_RENESAS || COMPILE_TEST | |
| depends on OF | |
| ---help--- | |
| This is a driver for the Renesas Frame Compression Processor (FCP). | |
| The FCP is a companion module of video processing modules in the | |
| Renesas R-Car Gen3 SoCs. It handles memory access for the codec, | |
| VSP and FDP modules. | |
| To compile this driver as a module, choose M here: the module | |
| will be called rcar-fcp. | |
| config VIDEO_RENESAS_VSP1 | |
| tristate "Renesas VSP1 Video Processing Engine" | |
| depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && HAS_DMA | |
| depends on (ARCH_RENESAS && OF) || COMPILE_TEST | |
| depends on (!ARM64 && !VIDEO_RENESAS_FCP) || VIDEO_RENESAS_FCP | |
| select VIDEOBUF2_DMA_CONTIG | |
| ---help--- | |
| This is a V4L2 driver for the Renesas VSP1 video processing engine. | |
| To compile this driver as a module, choose M here: the module | |
| will be called vsp1. | |
| config VIDEO_TI_VPE | |
| tristate "TI VPE (Video Processing Engine) driver" | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| depends on SOC_DRA7XX || COMPILE_TEST | |
| depends on HAS_DMA | |
| select VIDEOBUF2_DMA_CONTIG | |
| select V4L2_MEM2MEM_DEV | |
| default n | |
| ---help--- | |
| Support for the TI VPE(Video Processing Engine) block | |
| found on DRA7XX SoC. | |
| config VIDEO_TI_VPE_DEBUG | |
| bool "VPE debug messages" | |
| depends on VIDEO_TI_VPE | |
| ---help--- | |
| Enable debug messages on VPE driver. | |
| endif # V4L_MEM2MEM_DRIVERS | |
| menuconfig V4L_TEST_DRIVERS | |
| bool "Media test drivers" | |
| depends on MEDIA_CAMERA_SUPPORT | |
| if V4L_TEST_DRIVERS | |
| source "drivers/media/platform/vivid/Kconfig" | |
| config VIDEO_VIM2M | |
| tristate "Virtual Memory-to-Memory Driver" | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| select VIDEOBUF2_VMALLOC | |
| select V4L2_MEM2MEM_DEV | |
| default n | |
| ---help--- | |
| This is a virtual test device for the memory-to-memory driver | |
| framework. | |
| endif #V4L_TEST_DRIVERS | |
| menuconfig DVB_PLATFORM_DRIVERS | |
| bool "DVB platform devices" | |
| depends on MEDIA_DIGITAL_TV_SUPPORT | |
| default n | |
| ---help--- | |
| Say Y here to enable support for platform-specific Digital TV drivers. | |
| if DVB_PLATFORM_DRIVERS | |
| source "drivers/media/platform/sti/c8sectpfe/Kconfig" | |
| endif #DVB_PLATFORM_DRIVERS |