| config VIDEO_DAVINCI_VPIF_DISPLAY | |
| tristate "TI DaVinci VPIF V4L2-Display driver" | |
| depends on VIDEO_V4L2 | |
| depends on ARCH_DAVINCI || COMPILE_TEST | |
| depends on HAS_DMA | |
| depends on I2C | |
| select VIDEOBUF2_DMA_CONTIG | |
| select VIDEO_ADV7343 if MEDIA_SUBDRV_AUTOSELECT | |
| select VIDEO_THS7303 if MEDIA_SUBDRV_AUTOSELECT | |
| help | |
| Enables Davinci VPIF module used for display devices. | |
| This module is used for display on TI DM6467/DA850/OMAPL138 | |
| SoCs. | |
| To compile this driver as a module, choose M here. There will | |
| be two modules called vpif.ko and vpif_display.ko | |
| config VIDEO_DAVINCI_VPIF_CAPTURE | |
| tristate "TI DaVinci VPIF video capture driver" | |
| depends on VIDEO_V4L2 | |
| depends on ARCH_DAVINCI || COMPILE_TEST | |
| depends on HAS_DMA | |
| depends on I2C | |
| select VIDEOBUF2_DMA_CONTIG | |
| help | |
| Enables Davinci VPIF module used for capture devices. | |
| This module is used for capture on TI DM6467/DA850/OMAPL138 | |
| SoCs. | |
| To compile this driver as a module, choose M here. There will | |
| be two modules called vpif.ko and vpif_capture.ko | |
| config VIDEO_DM6446_CCDC | |
| tristate "TI DM6446 CCDC video capture driver" | |
| depends on VIDEO_V4L2 | |
| depends on ARCH_DAVINCI || COMPILE_TEST | |
| depends on HAS_DMA | |
| depends on I2C | |
| select VIDEOBUF_DMA_CONTIG | |
| help | |
| Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces | |
| with decoder modules such as TVP5146 over BT656 or | |
| sensor module such as MT9T001 over a raw interface. This | |
| module configures the interface and CCDC/ISIF to do | |
| video frame capture from slave decoders. | |
| To compile this driver as a module, choose M here. There will | |
| be three modules called vpfe_capture.ko, vpss.ko and dm644x_ccdc.ko | |
| config VIDEO_DM355_CCDC | |
| tristate "TI DM355 CCDC video capture driver" | |
| depends on VIDEO_V4L2 | |
| depends on ARCH_DAVINCI || COMPILE_TEST | |
| depends on HAS_DMA | |
| depends on I2C | |
| select VIDEOBUF_DMA_CONTIG | |
| help | |
| Enables DM355 CCD hw module. DM355 CCDC hw interfaces | |
| with decoder modules such as TVP5146 over BT656 or | |
| sensor module such as MT9T001 over a raw interface. This | |
| module configures the interface and CCDC/ISIF to do | |
| video frame capture from a slave decoders | |
| To compile this driver as a module, choose M here. There will | |
| be three modules called vpfe_capture.ko, vpss.ko and dm355_ccdc.ko | |
| config VIDEO_DM365_ISIF | |
| tristate "TI DM365 ISIF video capture driver" | |
| depends on VIDEO_V4L2 && ARCH_DAVINCI | |
| depends on HAS_DMA | |
| depends on I2C | |
| select VIDEOBUF_DMA_CONTIG | |
| help | |
| Enables ISIF hw module. This is the hardware module for | |
| configuring ISIF in VPFE to capture Raw Bayer RGB data from | |
| a image sensor or YUV data from a YUV source. | |
| To compile this driver as a module, choose M here. There will | |
| be three modules called vpfe_capture.ko, vpss.ko and isif.ko | |
| config VIDEO_DAVINCI_VPBE_DISPLAY | |
| tristate "TI DaVinci VPBE V4L2-Display driver" | |
| depends on VIDEO_V4L2 && ARCH_DAVINCI | |
| depends on HAS_DMA | |
| depends on I2C | |
| select VIDEOBUF2_DMA_CONTIG | |
| help | |
| Enables Davinci VPBE module used for display devices. | |
| This module is used for display on TI DM644x/DM365/DM355 | |
| based display devices. | |
| To compile this driver as a module, choose M here. There will | |
| be five modules created called vpss.ko, vpbe.ko, vpbe_osd.ko, | |
| vpbe_venc.ko and vpbe_display.ko |