| /* | |
| * ImgTec IR Hardware Decoder found in PowerDown Controller. | |
| * | |
| * Copyright 2010-2014 Imagination Technologies Ltd. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| * | |
| * This ties into the input subsystem using the RC-core. Protocol support is | |
| * provided in separate modules which provide the parameters and scancode | |
| * translation functions to set up the hardware decoder and interpret the | |
| * resulting input. | |
| */ | |
| #include <linux/bitops.h> | |
| #include <linux/clk.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/timer.h> | |
| #include <media/rc-core.h> | |
| #include "img-ir.h" | |
| /* Decoders lock (only modified to preprocess them) */ | |
| static DEFINE_SPINLOCK(img_ir_decoders_lock); | |
| static bool img_ir_decoders_preprocessed; | |
| static struct img_ir_decoder *img_ir_decoders[] = { | |
| #ifdef CONFIG_IR_IMG_NEC | |
| &img_ir_nec, | |
| #endif | |
| #ifdef CONFIG_IR_IMG_JVC | |
| &img_ir_jvc, | |
| #endif | |
| #ifdef CONFIG_IR_IMG_SONY | |
| &img_ir_sony, | |
| #endif | |
| #ifdef CONFIG_IR_IMG_SHARP | |
| &img_ir_sharp, | |
| #endif | |
| #ifdef CONFIG_IR_IMG_SANYO | |
| &img_ir_sanyo, | |
| #endif | |
| #ifdef CONFIG_IR_IMG_RC5 | |
| &img_ir_rc5, | |
| #endif | |
| #ifdef CONFIG_IR_IMG_RC6 | |
| &img_ir_rc6, | |
| #endif | |
| NULL | |
| }; | |
| #define IMG_IR_F_FILTER BIT(RC_FILTER_NORMAL) /* enable filtering */ | |
| #define IMG_IR_F_WAKE BIT(RC_FILTER_WAKEUP) /* enable waking */ | |
| /* code type quirks */ | |
| #define IMG_IR_QUIRK_CODE_BROKEN 0x1 /* Decode is broken */ | |
| #define IMG_IR_QUIRK_CODE_LEN_INCR 0x2 /* Bit length needs increment */ | |
| /* | |
| * The decoder generates rapid interrupts without actually having | |
| * received any new data after an incomplete IR code is decoded. | |
| */ | |
| #define IMG_IR_QUIRK_CODE_IRQ 0x4 | |
| /* functions for preprocessing timings, ensuring max is set */ | |
| static void img_ir_timing_preprocess(struct img_ir_timing_range *range, | |
| unsigned int unit) | |
| { | |
| if (range->max < range->min) | |
| range->max = range->min; | |
| if (unit) { | |
| /* multiply by unit and convert to microseconds */ | |
| range->min = (range->min*unit)/1000; | |
| range->max = (range->max*unit + 999)/1000; /* round up */ | |
| } | |
| } | |
| static void img_ir_symbol_timing_preprocess(struct img_ir_symbol_timing *timing, | |
| unsigned int unit) | |
| { | |
| img_ir_timing_preprocess(&timing->pulse, unit); | |
| img_ir_timing_preprocess(&timing->space, unit); | |
| } | |
| static void img_ir_timings_preprocess(struct img_ir_timings *timings, | |
| unsigned int unit) | |
| { | |
| img_ir_symbol_timing_preprocess(&timings->ldr, unit); | |
| img_ir_symbol_timing_preprocess(&timings->s00, unit); | |
| img_ir_symbol_timing_preprocess(&timings->s01, unit); | |
| img_ir_symbol_timing_preprocess(&timings->s10, unit); | |
| img_ir_symbol_timing_preprocess(&timings->s11, unit); | |
| /* default s10 and s11 to s00 and s01 if no leader */ | |
| if (unit) | |
| /* multiply by unit and convert to microseconds (round up) */ | |
| timings->ft.ft_min = (timings->ft.ft_min*unit + 999)/1000; | |
| } | |
| /* functions for filling empty fields with defaults */ | |
| static void img_ir_timing_defaults(struct img_ir_timing_range *range, | |
| struct img_ir_timing_range *defaults) | |
| { | |
| if (!range->min) | |
| range->min = defaults->min; | |
| if (!range->max) | |
| range->max = defaults->max; | |
| } | |
| static void img_ir_symbol_timing_defaults(struct img_ir_symbol_timing *timing, | |
| struct img_ir_symbol_timing *defaults) | |
| { | |
| img_ir_timing_defaults(&timing->pulse, &defaults->pulse); | |
| img_ir_timing_defaults(&timing->space, &defaults->space); | |
| } | |
| static void img_ir_timings_defaults(struct img_ir_timings *timings, | |
| struct img_ir_timings *defaults) | |
| { | |
| img_ir_symbol_timing_defaults(&timings->ldr, &defaults->ldr); | |
| img_ir_symbol_timing_defaults(&timings->s00, &defaults->s00); | |
| img_ir_symbol_timing_defaults(&timings->s01, &defaults->s01); | |
| img_ir_symbol_timing_defaults(&timings->s10, &defaults->s10); | |
| img_ir_symbol_timing_defaults(&timings->s11, &defaults->s11); | |
| if (!timings->ft.ft_min) | |
| timings->ft.ft_min = defaults->ft.ft_min; | |
| } | |
| /* functions for converting timings to register values */ | |
| /** | |
| * img_ir_control() - Convert control struct to control register value. | |
| * @control: Control data | |
| * | |
| * Returns: The control register value equivalent of @control. | |
| */ | |
| static u32 img_ir_control(const struct img_ir_control *control) | |
| { | |
| u32 ctrl = control->code_type << IMG_IR_CODETYPE_SHIFT; | |
| if (control->decoden) | |
| ctrl |= IMG_IR_DECODEN; | |
| if (control->hdrtog) | |
| ctrl |= IMG_IR_HDRTOG; | |
| if (control->ldrdec) | |
| ctrl |= IMG_IR_LDRDEC; | |
| if (control->decodinpol) | |
| ctrl |= IMG_IR_DECODINPOL; | |
| if (control->bitorien) | |
| ctrl |= IMG_IR_BITORIEN; | |
| if (control->d1validsel) | |
| ctrl |= IMG_IR_D1VALIDSEL; | |
| if (control->bitinv) | |
| ctrl |= IMG_IR_BITINV; | |
| if (control->decodend2) | |
| ctrl |= IMG_IR_DECODEND2; | |
| if (control->bitoriend2) | |
| ctrl |= IMG_IR_BITORIEND2; | |
| if (control->bitinvd2) | |
| ctrl |= IMG_IR_BITINVD2; | |
| return ctrl; | |
| } | |
| /** | |
| * img_ir_timing_range_convert() - Convert microsecond range. | |
| * @out: Output timing range in clock cycles with a shift. | |
| * @in: Input timing range in microseconds. | |
| * @tolerance: Tolerance as a fraction of 128 (roughly percent). | |
| * @clock_hz: IR clock rate in Hz. | |
| * @shift: Shift of output units. | |
| * | |
| * Converts min and max from microseconds to IR clock cycles, applies a | |
| * tolerance, and shifts for the register, rounding in the right direction. | |
| * Note that in and out can safely be the same object. | |
| */ | |
| static void img_ir_timing_range_convert(struct img_ir_timing_range *out, | |
| const struct img_ir_timing_range *in, | |
| unsigned int tolerance, | |
| unsigned long clock_hz, | |
| unsigned int shift) | |
| { | |
| unsigned int min = in->min; | |
| unsigned int max = in->max; | |
| /* add a tolerance */ | |
| min = min - (min*tolerance >> 7); | |
| max = max + (max*tolerance >> 7); | |
| /* convert from microseconds into clock cycles */ | |
| min = min*clock_hz / 1000000; | |
| max = (max*clock_hz + 999999) / 1000000; /* round up */ | |
| /* apply shift and copy to output */ | |
| out->min = min >> shift; | |
| out->max = (max + ((1 << shift) - 1)) >> shift; /* round up */ | |
| } | |
| /** | |
| * img_ir_symbol_timing() - Convert symbol timing struct to register value. | |
| * @timing: Symbol timing data | |
| * @tolerance: Timing tolerance where 0-128 represents 0-100% | |
| * @clock_hz: Frequency of source clock in Hz | |
| * @pd_shift: Shift to apply to symbol period | |
| * @w_shift: Shift to apply to symbol width | |
| * | |
| * Returns: Symbol timing register value based on arguments. | |
| */ | |
| static u32 img_ir_symbol_timing(const struct img_ir_symbol_timing *timing, | |
| unsigned int tolerance, | |
| unsigned long clock_hz, | |
| unsigned int pd_shift, | |
| unsigned int w_shift) | |
| { | |
| struct img_ir_timing_range hw_pulse, hw_period; | |
| /* we calculate period in hw_period, then convert in place */ | |
| hw_period.min = timing->pulse.min + timing->space.min; | |
| hw_period.max = timing->pulse.max + timing->space.max; | |
| img_ir_timing_range_convert(&hw_period, &hw_period, | |
| tolerance, clock_hz, pd_shift); | |
| img_ir_timing_range_convert(&hw_pulse, &timing->pulse, | |
| tolerance, clock_hz, w_shift); | |
| /* construct register value */ | |
| return (hw_period.max << IMG_IR_PD_MAX_SHIFT) | | |
| (hw_period.min << IMG_IR_PD_MIN_SHIFT) | | |
| (hw_pulse.max << IMG_IR_W_MAX_SHIFT) | | |
| (hw_pulse.min << IMG_IR_W_MIN_SHIFT); | |
| } | |
| /** | |
| * img_ir_free_timing() - Convert free time timing struct to register value. | |
| * @timing: Free symbol timing data | |
| * @clock_hz: Source clock frequency in Hz | |
| * | |
| * Returns: Free symbol timing register value. | |
| */ | |
| static u32 img_ir_free_timing(const struct img_ir_free_timing *timing, | |
| unsigned long clock_hz) | |
| { | |
| unsigned int minlen, maxlen, ft_min; | |
| /* minlen is only 5 bits, and round minlen to multiple of 2 */ | |
| if (timing->minlen < 30) | |
| minlen = timing->minlen & -2; | |
| else | |
| minlen = 30; | |
| /* maxlen has maximum value of 48, and round maxlen to multiple of 2 */ | |
| if (timing->maxlen < 48) | |
| maxlen = (timing->maxlen + 1) & -2; | |
| else | |
| maxlen = 48; | |
| /* convert and shift ft_min, rounding upwards */ | |
| ft_min = (timing->ft_min*clock_hz + 999999) / 1000000; | |
| ft_min = (ft_min + 7) >> 3; | |
| /* construct register value */ | |
| return (maxlen << IMG_IR_MAXLEN_SHIFT) | | |
| (minlen << IMG_IR_MINLEN_SHIFT) | | |
| (ft_min << IMG_IR_FT_MIN_SHIFT); | |
| } | |
| /** | |
| * img_ir_free_timing_dynamic() - Update free time register value. | |
| * @st_ft: Static free time register value from img_ir_free_timing. | |
| * @filter: Current filter which may additionally restrict min/max len. | |
| * | |
| * Returns: Updated free time register value based on the current filter. | |
| */ | |
| static u32 img_ir_free_timing_dynamic(u32 st_ft, struct img_ir_filter *filter) | |
| { | |
| unsigned int minlen, maxlen, newminlen, newmaxlen; | |
| /* round minlen, maxlen to multiple of 2 */ | |
| newminlen = filter->minlen & -2; | |
| newmaxlen = (filter->maxlen + 1) & -2; | |
| /* extract min/max len from register */ | |
| minlen = (st_ft & IMG_IR_MINLEN) >> IMG_IR_MINLEN_SHIFT; | |
| maxlen = (st_ft & IMG_IR_MAXLEN) >> IMG_IR_MAXLEN_SHIFT; | |
| /* if the new values are more restrictive, update the register value */ | |
| if (newminlen > minlen) { | |
| st_ft &= ~IMG_IR_MINLEN; | |
| st_ft |= newminlen << IMG_IR_MINLEN_SHIFT; | |
| } | |
| if (newmaxlen < maxlen) { | |
| st_ft &= ~IMG_IR_MAXLEN; | |
| st_ft |= newmaxlen << IMG_IR_MAXLEN_SHIFT; | |
| } | |
| return st_ft; | |
| } | |
| /** | |
| * img_ir_timings_convert() - Convert timings to register values | |
| * @regs: Output timing register values | |
| * @timings: Input timing data | |
| * @tolerance: Timing tolerance where 0-128 represents 0-100% | |
| * @clock_hz: Source clock frequency in Hz | |
| */ | |
| static void img_ir_timings_convert(struct img_ir_timing_regvals *regs, | |
| const struct img_ir_timings *timings, | |
| unsigned int tolerance, | |
| unsigned int clock_hz) | |
| { | |
| /* leader symbol timings are divided by 16 */ | |
| regs->ldr = img_ir_symbol_timing(&timings->ldr, tolerance, clock_hz, | |
| 4, 4); | |
| /* other symbol timings, pd fields only are divided by 2 */ | |
| regs->s00 = img_ir_symbol_timing(&timings->s00, tolerance, clock_hz, | |
| 1, 0); | |
| regs->s01 = img_ir_symbol_timing(&timings->s01, tolerance, clock_hz, | |
| 1, 0); | |
| regs->s10 = img_ir_symbol_timing(&timings->s10, tolerance, clock_hz, | |
| 1, 0); | |
| regs->s11 = img_ir_symbol_timing(&timings->s11, tolerance, clock_hz, | |
| 1, 0); | |
| regs->ft = img_ir_free_timing(&timings->ft, clock_hz); | |
| } | |
| /** | |
| * img_ir_decoder_preprocess() - Preprocess timings in decoder. | |
| * @decoder: Decoder to be preprocessed. | |
| * | |
| * Ensures that the symbol timing ranges are valid with respect to ordering, and | |
| * does some fixed conversion on them. | |
| */ | |
| static void img_ir_decoder_preprocess(struct img_ir_decoder *decoder) | |
| { | |
| /* default tolerance */ | |
| if (!decoder->tolerance) | |
| decoder->tolerance = 10; /* percent */ | |
| /* and convert tolerance to fraction out of 128 */ | |
| decoder->tolerance = decoder->tolerance * 128 / 100; | |
| /* fill in implicit fields */ | |
| img_ir_timings_preprocess(&decoder->timings, decoder->unit); | |
| /* do the same for repeat timings if applicable */ | |
| if (decoder->repeat) { | |
| img_ir_timings_preprocess(&decoder->rtimings, decoder->unit); | |
| img_ir_timings_defaults(&decoder->rtimings, &decoder->timings); | |
| } | |
| } | |
| /** | |
| * img_ir_decoder_convert() - Generate internal timings in decoder. | |
| * @decoder: Decoder to be converted to internal timings. | |
| * @timings: Timing register values. | |
| * @clock_hz: IR clock rate in Hz. | |
| * | |
| * Fills out the repeat timings and timing register values for a specific clock | |
| * rate. | |
| */ | |
| static void img_ir_decoder_convert(const struct img_ir_decoder *decoder, | |
| struct img_ir_reg_timings *reg_timings, | |
| unsigned int clock_hz) | |
| { | |
| /* calculate control value */ | |
| reg_timings->ctrl = img_ir_control(&decoder->control); | |
| /* fill in implicit fields and calculate register values */ | |
| img_ir_timings_convert(®_timings->timings, &decoder->timings, | |
| decoder->tolerance, clock_hz); | |
| /* do the same for repeat timings if applicable */ | |
| if (decoder->repeat) | |
| img_ir_timings_convert(®_timings->rtimings, | |
| &decoder->rtimings, decoder->tolerance, | |
| clock_hz); | |
| } | |
| /** | |
| * img_ir_write_timings() - Write timings to the hardware now | |
| * @priv: IR private data | |
| * @regs: Timing register values to write | |
| * @type: RC filter type (RC_FILTER_*) | |
| * | |
| * Write timing register values @regs to the hardware, taking into account the | |
| * current filter which may impose restrictions on the length of the expected | |
| * data. | |
| */ | |
| static void img_ir_write_timings(struct img_ir_priv *priv, | |
| struct img_ir_timing_regvals *regs, | |
| enum rc_filter_type type) | |
| { | |
| struct img_ir_priv_hw *hw = &priv->hw; | |
| /* filter may be more restrictive to minlen, maxlen */ | |
| u32 ft = regs->ft; | |
| if (hw->flags & BIT(type)) | |
| ft = img_ir_free_timing_dynamic(regs->ft, &hw->filters[type]); | |
| /* write to registers */ | |
| img_ir_write(priv, IMG_IR_LEAD_SYMB_TIMING, regs->ldr); | |
| img_ir_write(priv, IMG_IR_S00_SYMB_TIMING, regs->s00); | |
| img_ir_write(priv, IMG_IR_S01_SYMB_TIMING, regs->s01); | |
| img_ir_write(priv, IMG_IR_S10_SYMB_TIMING, regs->s10); | |
| img_ir_write(priv, IMG_IR_S11_SYMB_TIMING, regs->s11); | |
| img_ir_write(priv, IMG_IR_FREE_SYMB_TIMING, ft); | |
| dev_dbg(priv->dev, "timings: ldr=%#x, s=[%#x, %#x, %#x, %#x], ft=%#x\n", | |
| regs->ldr, regs->s00, regs->s01, regs->s10, regs->s11, ft); | |
| } | |
| static void img_ir_write_filter(struct img_ir_priv *priv, | |
| struct img_ir_filter *filter) | |
| { | |
| if (filter) { | |
| dev_dbg(priv->dev, "IR filter=%016llx & %016llx\n", | |
| (unsigned long long)filter->data, | |
| (unsigned long long)filter->mask); | |
| img_ir_write(priv, IMG_IR_IRQ_MSG_DATA_LW, (u32)filter->data); | |
| img_ir_write(priv, IMG_IR_IRQ_MSG_DATA_UP, (u32)(filter->data | |
| >> 32)); | |
| img_ir_write(priv, IMG_IR_IRQ_MSG_MASK_LW, (u32)filter->mask); | |
| img_ir_write(priv, IMG_IR_IRQ_MSG_MASK_UP, (u32)(filter->mask | |
| >> 32)); | |
| } else { | |
| dev_dbg(priv->dev, "IR clearing filter\n"); | |
| img_ir_write(priv, IMG_IR_IRQ_MSG_MASK_LW, 0); | |
| img_ir_write(priv, IMG_IR_IRQ_MSG_MASK_UP, 0); | |
| } | |
| } | |
| /* caller must have lock */ | |
| static void _img_ir_set_filter(struct img_ir_priv *priv, | |
| struct img_ir_filter *filter) | |
| { | |
| struct img_ir_priv_hw *hw = &priv->hw; | |
| u32 irq_en, irq_on; | |
| irq_en = img_ir_read(priv, IMG_IR_IRQ_ENABLE); | |
| if (filter) { | |
| /* Only use the match interrupt */ | |
| hw->filters[RC_FILTER_NORMAL] = *filter; | |
| hw->flags |= IMG_IR_F_FILTER; | |
| irq_on = IMG_IR_IRQ_DATA_MATCH; | |
| irq_en &= ~(IMG_IR_IRQ_DATA_VALID | IMG_IR_IRQ_DATA2_VALID); | |
| } else { | |
| /* Only use the valid interrupt */ | |
| hw->flags &= ~IMG_IR_F_FILTER; | |
| irq_en &= ~IMG_IR_IRQ_DATA_MATCH; | |
| irq_on = IMG_IR_IRQ_DATA_VALID | IMG_IR_IRQ_DATA2_VALID; | |
| } | |
| irq_en |= irq_on; | |
| img_ir_write_filter(priv, filter); | |
| /* clear any interrupts we're enabling so we don't handle old ones */ | |
| img_ir_write(priv, IMG_IR_IRQ_CLEAR, irq_on); | |
| img_ir_write(priv, IMG_IR_IRQ_ENABLE, irq_en); | |
| } | |
| /* caller must have lock */ | |
| static void _img_ir_set_wake_filter(struct img_ir_priv *priv, | |
| struct img_ir_filter *filter) | |
| { | |
| struct img_ir_priv_hw *hw = &priv->hw; | |
| if (filter) { | |
| /* Enable wake, and copy filter for later */ | |
| hw->filters[RC_FILTER_WAKEUP] = *filter; | |
| hw->flags |= IMG_IR_F_WAKE; | |
| } else { | |
| /* Disable wake */ | |
| hw->flags &= ~IMG_IR_F_WAKE; | |
| } | |
| } | |
| /* Callback for setting scancode filter */ | |
| static int img_ir_set_filter(struct rc_dev *dev, enum rc_filter_type type, | |
| struct rc_scancode_filter *sc_filter) | |
| { | |
| struct img_ir_priv *priv = dev->priv; | |
| struct img_ir_priv_hw *hw = &priv->hw; | |
| struct img_ir_filter filter, *filter_ptr = &filter; | |
| int ret = 0; | |
| dev_dbg(priv->dev, "IR scancode %sfilter=%08x & %08x\n", | |
| type == RC_FILTER_WAKEUP ? "wake " : "", | |
| sc_filter->data, | |
| sc_filter->mask); | |
| spin_lock_irq(&priv->lock); | |
| /* filtering can always be disabled */ | |
| if (!sc_filter->mask) { | |
| filter_ptr = NULL; | |
| goto set_unlock; | |
| } | |
| /* current decoder must support scancode filtering */ | |
| if (!hw->decoder || !hw->decoder->filter) { | |
| ret = -EINVAL; | |
| goto unlock; | |
| } | |
| /* convert scancode filter to raw filter */ | |
| filter.minlen = 0; | |
| filter.maxlen = ~0; | |
| ret = hw->decoder->filter(sc_filter, &filter, hw->enabled_protocols); | |
| if (ret) | |
| goto unlock; | |
| dev_dbg(priv->dev, "IR raw %sfilter=%016llx & %016llx\n", | |
| type == RC_FILTER_WAKEUP ? "wake " : "", | |
| (unsigned long long)filter.data, | |
| (unsigned long long)filter.mask); | |
| set_unlock: | |
| /* apply raw filters */ | |
| switch (type) { | |
| case RC_FILTER_NORMAL: | |
| _img_ir_set_filter(priv, filter_ptr); | |
| break; | |
| case RC_FILTER_WAKEUP: | |
| _img_ir_set_wake_filter(priv, filter_ptr); | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| } | |
| unlock: | |
| spin_unlock_irq(&priv->lock); | |
| return ret; | |
| } | |
| static int img_ir_set_normal_filter(struct rc_dev *dev, | |
| struct rc_scancode_filter *sc_filter) | |
| { | |
| return img_ir_set_filter(dev, RC_FILTER_NORMAL, sc_filter); | |
| } | |
| static int img_ir_set_wakeup_filter(struct rc_dev *dev, | |
| struct rc_scancode_filter *sc_filter) | |
| { | |
| return img_ir_set_filter(dev, RC_FILTER_WAKEUP, sc_filter); | |
| } | |
| /** | |
| * img_ir_set_decoder() - Set the current decoder. | |
| * @priv: IR private data. | |
| * @decoder: Decoder to use with immediate effect. | |
| * @proto: Protocol bitmap (or 0 to use decoder->type). | |
| */ | |
| static void img_ir_set_decoder(struct img_ir_priv *priv, | |
| const struct img_ir_decoder *decoder, | |
| u64 proto) | |
| { | |
| struct img_ir_priv_hw *hw = &priv->hw; | |
| struct rc_dev *rdev = hw->rdev; | |
| u32 ir_status, irq_en; | |
| spin_lock_irq(&priv->lock); | |
| /* | |
| * First record that the protocol is being stopped so that the end timer | |
| * isn't restarted while we're trying to stop it. | |
| */ | |
| hw->stopping = true; | |
| /* | |
| * Release the lock to stop the end timer, since the end timer handler | |
| * acquires the lock and we don't want to deadlock waiting for it. | |
| */ | |
| spin_unlock_irq(&priv->lock); | |
| del_timer_sync(&hw->end_timer); | |
| del_timer_sync(&hw->suspend_timer); | |
| spin_lock_irq(&priv->lock); | |
| hw->stopping = false; | |
| /* switch off and disable interrupts */ | |
| img_ir_write(priv, IMG_IR_CONTROL, 0); | |
| irq_en = img_ir_read(priv, IMG_IR_IRQ_ENABLE); | |
| img_ir_write(priv, IMG_IR_IRQ_ENABLE, irq_en & IMG_IR_IRQ_EDGE); | |
| img_ir_write(priv, IMG_IR_IRQ_CLEAR, IMG_IR_IRQ_ALL & ~IMG_IR_IRQ_EDGE); | |
| /* ack any data already detected */ | |
| ir_status = img_ir_read(priv, IMG_IR_STATUS); | |
| if (ir_status & (IMG_IR_RXDVAL | IMG_IR_RXDVALD2)) { | |
| ir_status &= ~(IMG_IR_RXDVAL | IMG_IR_RXDVALD2); | |
| img_ir_write(priv, IMG_IR_STATUS, ir_status); | |
| } | |
| /* always read data to clear buffer if IR wakes the device */ | |
| img_ir_read(priv, IMG_IR_DATA_LW); | |
| img_ir_read(priv, IMG_IR_DATA_UP); | |
| /* switch back to normal mode */ | |
| hw->mode = IMG_IR_M_NORMAL; | |
| /* clear the wakeup scancode filter */ | |
| rdev->scancode_wakeup_filter.data = 0; | |
| rdev->scancode_wakeup_filter.mask = 0; | |
| /* clear raw filters */ | |
| _img_ir_set_filter(priv, NULL); | |
| _img_ir_set_wake_filter(priv, NULL); | |
| /* clear the enabled protocols */ | |
| hw->enabled_protocols = 0; | |
| /* switch decoder */ | |
| hw->decoder = decoder; | |
| if (!decoder) | |
| goto unlock; | |
| /* set the enabled protocols */ | |
| if (!proto) | |
| proto = decoder->type; | |
| hw->enabled_protocols = proto; | |
| /* write the new timings */ | |
| img_ir_decoder_convert(decoder, &hw->reg_timings, hw->clk_hz); | |
| img_ir_write_timings(priv, &hw->reg_timings.timings, RC_FILTER_NORMAL); | |
| /* set up and enable */ | |
| img_ir_write(priv, IMG_IR_CONTROL, hw->reg_timings.ctrl); | |
| unlock: | |
| spin_unlock_irq(&priv->lock); | |
| } | |
| /** | |
| * img_ir_decoder_compatable() - Find whether a decoder will work with a device. | |
| * @priv: IR private data. | |
| * @dec: Decoder to check. | |
| * | |
| * Returns: true if @dec is compatible with the device @priv refers to. | |
| */ | |
| static bool img_ir_decoder_compatible(struct img_ir_priv *priv, | |
| const struct img_ir_decoder *dec) | |
| { | |
| unsigned int ct; | |
| /* don't accept decoders using code types which aren't supported */ | |
| ct = dec->control.code_type; | |
| if (priv->hw.ct_quirks[ct] & IMG_IR_QUIRK_CODE_BROKEN) | |
| return false; | |
| return true; | |
| } | |
| /** | |
| * img_ir_allowed_protos() - Get allowed protocols from global decoder list. | |
| * @priv: IR private data. | |
| * | |
| * Returns: Mask of protocols supported by the device @priv refers to. | |
| */ | |
| static u64 img_ir_allowed_protos(struct img_ir_priv *priv) | |
| { | |
| u64 protos = 0; | |
| struct img_ir_decoder **decp; | |
| for (decp = img_ir_decoders; *decp; ++decp) { | |
| const struct img_ir_decoder *dec = *decp; | |
| if (img_ir_decoder_compatible(priv, dec)) | |
| protos |= dec->type; | |
| } | |
| return protos; | |
| } | |
| /* Callback for changing protocol using sysfs */ | |
| static int img_ir_change_protocol(struct rc_dev *dev, u64 *ir_type) | |
| { | |
| struct img_ir_priv *priv = dev->priv; | |
| struct img_ir_priv_hw *hw = &priv->hw; | |
| struct rc_dev *rdev = hw->rdev; | |
| struct img_ir_decoder **decp; | |
| u64 wakeup_protocols; | |
| if (!*ir_type) { | |
| /* disable all protocols */ | |
| img_ir_set_decoder(priv, NULL, 0); | |
| goto success; | |
| } | |
| for (decp = img_ir_decoders; *decp; ++decp) { | |
| const struct img_ir_decoder *dec = *decp; | |
| if (!img_ir_decoder_compatible(priv, dec)) | |
| continue; | |
| if (*ir_type & dec->type) { | |
| *ir_type &= dec->type; | |
| img_ir_set_decoder(priv, dec, *ir_type); | |
| goto success; | |
| } | |
| } | |
| return -EINVAL; | |
| success: | |
| /* | |
| * Only allow matching wakeup protocols for now, and only if filtering | |
| * is supported. | |
| */ | |
| wakeup_protocols = *ir_type; | |
| if (!hw->decoder || !hw->decoder->filter) | |
| wakeup_protocols = 0; | |
| rdev->allowed_wakeup_protocols = wakeup_protocols; | |
| rdev->enabled_wakeup_protocols = wakeup_protocols; | |
| return 0; | |
| } | |
| /* Changes ir-core protocol device attribute */ | |
| static void img_ir_set_protocol(struct img_ir_priv *priv, u64 proto) | |
| { | |
| struct rc_dev *rdev = priv->hw.rdev; | |
| spin_lock_irq(&rdev->rc_map.lock); | |
| rdev->rc_map.rc_type = __ffs64(proto); | |
| spin_unlock_irq(&rdev->rc_map.lock); | |
| mutex_lock(&rdev->lock); | |
| rdev->enabled_protocols = proto; | |
| rdev->allowed_wakeup_protocols = proto; | |
| rdev->enabled_wakeup_protocols = proto; | |
| mutex_unlock(&rdev->lock); | |
| } | |
| /* Set up IR decoders */ | |
| static void img_ir_init_decoders(void) | |
| { | |
| struct img_ir_decoder **decp; | |
| spin_lock(&img_ir_decoders_lock); | |
| if (!img_ir_decoders_preprocessed) { | |
| for (decp = img_ir_decoders; *decp; ++decp) | |
| img_ir_decoder_preprocess(*decp); | |
| img_ir_decoders_preprocessed = true; | |
| } | |
| spin_unlock(&img_ir_decoders_lock); | |
| } | |
| #ifdef CONFIG_PM_SLEEP | |
| /** | |
| * img_ir_enable_wake() - Switch to wake mode. | |
| * @priv: IR private data. | |
| * | |
| * Returns: non-zero if the IR can wake the system. | |
| */ | |
| static int img_ir_enable_wake(struct img_ir_priv *priv) | |
| { | |
| struct img_ir_priv_hw *hw = &priv->hw; | |
| int ret = 0; | |
| spin_lock_irq(&priv->lock); | |
| if (hw->flags & IMG_IR_F_WAKE) { | |
| /* interrupt only on a match */ | |
| hw->suspend_irqen = img_ir_read(priv, IMG_IR_IRQ_ENABLE); | |
| img_ir_write(priv, IMG_IR_IRQ_ENABLE, IMG_IR_IRQ_DATA_MATCH); | |
| img_ir_write_filter(priv, &hw->filters[RC_FILTER_WAKEUP]); | |
| img_ir_write_timings(priv, &hw->reg_timings.timings, | |
| RC_FILTER_WAKEUP); | |
| hw->mode = IMG_IR_M_WAKE; | |
| ret = 1; | |
| } | |
| spin_unlock_irq(&priv->lock); | |
| return ret; | |
| } | |
| /** | |
| * img_ir_disable_wake() - Switch out of wake mode. | |
| * @priv: IR private data | |
| * | |
| * Returns: 1 if the hardware should be allowed to wake from a sleep state. | |
| * 0 otherwise. | |
| */ | |
| static int img_ir_disable_wake(struct img_ir_priv *priv) | |
| { | |
| struct img_ir_priv_hw *hw = &priv->hw; | |
| int ret = 0; | |
| spin_lock_irq(&priv->lock); | |
| if (hw->flags & IMG_IR_F_WAKE) { | |
| /* restore normal filtering */ | |
| if (hw->flags & IMG_IR_F_FILTER) { | |
| img_ir_write(priv, IMG_IR_IRQ_ENABLE, | |
| (hw->suspend_irqen & IMG_IR_IRQ_EDGE) | | |
| IMG_IR_IRQ_DATA_MATCH); | |
| img_ir_write_filter(priv, | |
| &hw->filters[RC_FILTER_NORMAL]); | |
| } else { | |
| img_ir_write(priv, IMG_IR_IRQ_ENABLE, | |
| (hw->suspend_irqen & IMG_IR_IRQ_EDGE) | | |
| IMG_IR_IRQ_DATA_VALID | | |
| IMG_IR_IRQ_DATA2_VALID); | |
| img_ir_write_filter(priv, NULL); | |
| } | |
| img_ir_write_timings(priv, &hw->reg_timings.timings, | |
| RC_FILTER_NORMAL); | |
| hw->mode = IMG_IR_M_NORMAL; | |
| ret = 1; | |
| } | |
| spin_unlock_irq(&priv->lock); | |
| return ret; | |
| } | |
| #endif /* CONFIG_PM_SLEEP */ | |
| /* lock must be held */ | |
| static void img_ir_begin_repeat(struct img_ir_priv *priv) | |
| { | |
| struct img_ir_priv_hw *hw = &priv->hw; | |
| if (hw->mode == IMG_IR_M_NORMAL) { | |
| /* switch to repeat timings */ | |
| img_ir_write(priv, IMG_IR_CONTROL, 0); | |
| hw->mode = IMG_IR_M_REPEATING; | |
| img_ir_write_timings(priv, &hw->reg_timings.rtimings, | |
| RC_FILTER_NORMAL); | |
| img_ir_write(priv, IMG_IR_CONTROL, hw->reg_timings.ctrl); | |
| } | |
| } | |
| /* lock must be held */ | |
| static void img_ir_end_repeat(struct img_ir_priv *priv) | |
| { | |
| struct img_ir_priv_hw *hw = &priv->hw; | |
| if (hw->mode == IMG_IR_M_REPEATING) { | |
| /* switch to normal timings */ | |
| img_ir_write(priv, IMG_IR_CONTROL, 0); | |
| hw->mode = IMG_IR_M_NORMAL; | |
| img_ir_write_timings(priv, &hw->reg_timings.timings, | |
| RC_FILTER_NORMAL); | |
| img_ir_write(priv, IMG_IR_CONTROL, hw->reg_timings.ctrl); | |
| } | |
| } | |
| /* lock must be held */ | |
| static void img_ir_handle_data(struct img_ir_priv *priv, u32 len, u64 raw) | |
| { | |
| struct img_ir_priv_hw *hw = &priv->hw; | |
| const struct img_ir_decoder *dec = hw->decoder; | |
| int ret = IMG_IR_SCANCODE; | |
| struct img_ir_scancode_req request; | |
| request.protocol = RC_TYPE_UNKNOWN; | |
| request.toggle = 0; | |
| if (dec->scancode) | |
| ret = dec->scancode(len, raw, hw->enabled_protocols, &request); | |
| else if (len >= 32) | |
| request.scancode = (u32)raw; | |
| else if (len < 32) | |
| request.scancode = (u32)raw & ((1 << len)-1); | |
| dev_dbg(priv->dev, "data (%u bits) = %#llx\n", | |
| len, (unsigned long long)raw); | |
| if (ret == IMG_IR_SCANCODE) { | |
| dev_dbg(priv->dev, "decoded scan code %#x, toggle %u\n", | |
| request.scancode, request.toggle); | |
| rc_keydown(hw->rdev, request.protocol, request.scancode, | |
| request.toggle); | |
| img_ir_end_repeat(priv); | |
| } else if (ret == IMG_IR_REPEATCODE) { | |
| if (hw->mode == IMG_IR_M_REPEATING) { | |
| dev_dbg(priv->dev, "decoded repeat code\n"); | |
| rc_repeat(hw->rdev); | |
| } else { | |
| dev_dbg(priv->dev, "decoded unexpected repeat code, ignoring\n"); | |
| } | |
| } else { | |
| dev_dbg(priv->dev, "decode failed (%d)\n", ret); | |
| return; | |
| } | |
| /* we mustn't update the end timer while trying to stop it */ | |
| if (dec->repeat && !hw->stopping) { | |
| unsigned long interval; | |
| img_ir_begin_repeat(priv); | |
| /* update timer, but allowing for 1/8th tolerance */ | |
| interval = dec->repeat + (dec->repeat >> 3); | |
| mod_timer(&hw->end_timer, | |
| jiffies + msecs_to_jiffies(interval)); | |
| } | |
| } | |
| /* timer function to end waiting for repeat. */ | |
| static void img_ir_end_timer(unsigned long arg) | |
| { | |
| struct img_ir_priv *priv = (struct img_ir_priv *)arg; | |
| spin_lock_irq(&priv->lock); | |
| img_ir_end_repeat(priv); | |
| spin_unlock_irq(&priv->lock); | |
| } | |
| /* | |
| * Timer function to re-enable the current protocol after it had been | |
| * cleared when invalid interrupts were generated due to a quirk in the | |
| * img-ir decoder. | |
| */ | |
| static void img_ir_suspend_timer(unsigned long arg) | |
| { | |
| struct img_ir_priv *priv = (struct img_ir_priv *)arg; | |
| spin_lock_irq(&priv->lock); | |
| /* | |
| * Don't overwrite enabled valid/match IRQs if they have already been | |
| * changed by e.g. a filter change. | |
| */ | |
| if ((priv->hw.quirk_suspend_irq & IMG_IR_IRQ_EDGE) == | |
| img_ir_read(priv, IMG_IR_IRQ_ENABLE)) | |
| img_ir_write(priv, IMG_IR_IRQ_ENABLE, | |
| priv->hw.quirk_suspend_irq); | |
| /* enable */ | |
| img_ir_write(priv, IMG_IR_CONTROL, priv->hw.reg_timings.ctrl); | |
| spin_unlock_irq(&priv->lock); | |
| } | |
| #ifdef CONFIG_COMMON_CLK | |
| static void img_ir_change_frequency(struct img_ir_priv *priv, | |
| struct clk_notifier_data *change) | |
| { | |
| struct img_ir_priv_hw *hw = &priv->hw; | |
| dev_dbg(priv->dev, "clk changed %lu HZ -> %lu HZ\n", | |
| change->old_rate, change->new_rate); | |
| spin_lock_irq(&priv->lock); | |
| if (hw->clk_hz == change->new_rate) | |
| goto unlock; | |
| hw->clk_hz = change->new_rate; | |
| /* refresh current timings */ | |
| if (hw->decoder) { | |
| img_ir_decoder_convert(hw->decoder, &hw->reg_timings, | |
| hw->clk_hz); | |
| switch (hw->mode) { | |
| case IMG_IR_M_NORMAL: | |
| img_ir_write_timings(priv, &hw->reg_timings.timings, | |
| RC_FILTER_NORMAL); | |
| break; | |
| case IMG_IR_M_REPEATING: | |
| img_ir_write_timings(priv, &hw->reg_timings.rtimings, | |
| RC_FILTER_NORMAL); | |
| break; | |
| #ifdef CONFIG_PM_SLEEP | |
| case IMG_IR_M_WAKE: | |
| img_ir_write_timings(priv, &hw->reg_timings.timings, | |
| RC_FILTER_WAKEUP); | |
| break; | |
| #endif | |
| } | |
| } | |
| unlock: | |
| spin_unlock_irq(&priv->lock); | |
| } | |
| static int img_ir_clk_notify(struct notifier_block *self, unsigned long action, | |
| void *data) | |
| { | |
| struct img_ir_priv *priv = container_of(self, struct img_ir_priv, | |
| hw.clk_nb); | |
| switch (action) { | |
| case POST_RATE_CHANGE: | |
| img_ir_change_frequency(priv, data); | |
| break; | |
| default: | |
| break; | |
| } | |
| return NOTIFY_OK; | |
| } | |
| #endif /* CONFIG_COMMON_CLK */ | |
| /* called with priv->lock held */ | |
| void img_ir_isr_hw(struct img_ir_priv *priv, u32 irq_status) | |
| { | |
| struct img_ir_priv_hw *hw = &priv->hw; | |
| u32 ir_status, len, lw, up; | |
| unsigned int ct; | |
| /* use the current decoder */ | |
| if (!hw->decoder) | |
| return; | |
| ct = hw->decoder->control.code_type; | |
| ir_status = img_ir_read(priv, IMG_IR_STATUS); | |
| if (!(ir_status & (IMG_IR_RXDVAL | IMG_IR_RXDVALD2))) { | |
| if (!(priv->hw.ct_quirks[ct] & IMG_IR_QUIRK_CODE_IRQ) || | |
| hw->stopping) | |
| return; | |
| /* | |
| * The below functionality is added as a work around to stop | |
| * multiple Interrupts generated when an incomplete IR code is | |
| * received by the decoder. | |
| * The decoder generates rapid interrupts without actually | |
| * having received any new data. After a single interrupt it's | |
| * expected to clear up, but instead multiple interrupts are | |
| * rapidly generated. only way to get out of this loop is to | |
| * reset the control register after a short delay. | |
| */ | |
| img_ir_write(priv, IMG_IR_CONTROL, 0); | |
| hw->quirk_suspend_irq = img_ir_read(priv, IMG_IR_IRQ_ENABLE); | |
| img_ir_write(priv, IMG_IR_IRQ_ENABLE, | |
| hw->quirk_suspend_irq & IMG_IR_IRQ_EDGE); | |
| /* Timer activated to re-enable the protocol. */ | |
| mod_timer(&hw->suspend_timer, | |
| jiffies + msecs_to_jiffies(5)); | |
| return; | |
| } | |
| ir_status &= ~(IMG_IR_RXDVAL | IMG_IR_RXDVALD2); | |
| img_ir_write(priv, IMG_IR_STATUS, ir_status); | |
| len = (ir_status & IMG_IR_RXDLEN) >> IMG_IR_RXDLEN_SHIFT; | |
| /* some versions report wrong length for certain code types */ | |
| if (hw->ct_quirks[ct] & IMG_IR_QUIRK_CODE_LEN_INCR) | |
| ++len; | |
| lw = img_ir_read(priv, IMG_IR_DATA_LW); | |
| up = img_ir_read(priv, IMG_IR_DATA_UP); | |
| img_ir_handle_data(priv, len, (u64)up << 32 | lw); | |
| } | |
| void img_ir_setup_hw(struct img_ir_priv *priv) | |
| { | |
| struct img_ir_decoder **decp; | |
| if (!priv->hw.rdev) | |
| return; | |
| /* Use the first available decoder (or disable stuff if NULL) */ | |
| for (decp = img_ir_decoders; *decp; ++decp) { | |
| const struct img_ir_decoder *dec = *decp; | |
| if (img_ir_decoder_compatible(priv, dec)) { | |
| img_ir_set_protocol(priv, dec->type); | |
| img_ir_set_decoder(priv, dec, 0); | |
| return; | |
| } | |
| } | |
| img_ir_set_decoder(priv, NULL, 0); | |
| } | |
| /** | |
| * img_ir_probe_hw_caps() - Probe capabilities of the hardware. | |
| * @priv: IR private data. | |
| */ | |
| static void img_ir_probe_hw_caps(struct img_ir_priv *priv) | |
| { | |
| struct img_ir_priv_hw *hw = &priv->hw; | |
| /* | |
| * When a version of the block becomes available without these quirks, | |
| * they'll have to depend on the core revision. | |
| */ | |
| hw->ct_quirks[IMG_IR_CODETYPE_PULSELEN] | |
| |= IMG_IR_QUIRK_CODE_LEN_INCR; | |
| hw->ct_quirks[IMG_IR_CODETYPE_BIPHASE] | |
| |= IMG_IR_QUIRK_CODE_IRQ; | |
| hw->ct_quirks[IMG_IR_CODETYPE_2BITPULSEPOS] | |
| |= IMG_IR_QUIRK_CODE_BROKEN; | |
| } | |
| int img_ir_probe_hw(struct img_ir_priv *priv) | |
| { | |
| struct img_ir_priv_hw *hw = &priv->hw; | |
| struct rc_dev *rdev; | |
| int error; | |
| /* Ensure hardware decoders have been preprocessed */ | |
| img_ir_init_decoders(); | |
| /* Probe hardware capabilities */ | |
| img_ir_probe_hw_caps(priv); | |
| /* Set up the end timer */ | |
| setup_timer(&hw->end_timer, img_ir_end_timer, (unsigned long)priv); | |
| setup_timer(&hw->suspend_timer, img_ir_suspend_timer, | |
| (unsigned long)priv); | |
| /* Register a clock notifier */ | |
| if (!IS_ERR(priv->clk)) { | |
| hw->clk_hz = clk_get_rate(priv->clk); | |
| #ifdef CONFIG_COMMON_CLK | |
| hw->clk_nb.notifier_call = img_ir_clk_notify; | |
| error = clk_notifier_register(priv->clk, &hw->clk_nb); | |
| if (error) | |
| dev_warn(priv->dev, | |
| "failed to register clock notifier\n"); | |
| #endif | |
| } else { | |
| hw->clk_hz = 32768; | |
| } | |
| /* Allocate hardware decoder */ | |
| hw->rdev = rdev = rc_allocate_device(); | |
| if (!rdev) { | |
| dev_err(priv->dev, "cannot allocate input device\n"); | |
| error = -ENOMEM; | |
| goto err_alloc_rc; | |
| } | |
| rdev->priv = priv; | |
| rdev->map_name = RC_MAP_EMPTY; | |
| rdev->allowed_protocols = img_ir_allowed_protos(priv); | |
| rdev->input_name = "IMG Infrared Decoder"; | |
| rdev->s_filter = img_ir_set_normal_filter; | |
| rdev->s_wakeup_filter = img_ir_set_wakeup_filter; | |
| /* Register hardware decoder */ | |
| error = rc_register_device(rdev); | |
| if (error) { | |
| dev_err(priv->dev, "failed to register IR input device\n"); | |
| goto err_register_rc; | |
| } | |
| /* | |
| * Set this after rc_register_device as no protocols have been | |
| * registered yet. | |
| */ | |
| rdev->change_protocol = img_ir_change_protocol; | |
| device_init_wakeup(priv->dev, 1); | |
| return 0; | |
| err_register_rc: | |
| img_ir_set_decoder(priv, NULL, 0); | |
| hw->rdev = NULL; | |
| rc_free_device(rdev); | |
| err_alloc_rc: | |
| #ifdef CONFIG_COMMON_CLK | |
| if (!IS_ERR(priv->clk)) | |
| clk_notifier_unregister(priv->clk, &hw->clk_nb); | |
| #endif | |
| return error; | |
| } | |
| void img_ir_remove_hw(struct img_ir_priv *priv) | |
| { | |
| struct img_ir_priv_hw *hw = &priv->hw; | |
| struct rc_dev *rdev = hw->rdev; | |
| if (!rdev) | |
| return; | |
| img_ir_set_decoder(priv, NULL, 0); | |
| hw->rdev = NULL; | |
| rc_unregister_device(rdev); | |
| #ifdef CONFIG_COMMON_CLK | |
| if (!IS_ERR(priv->clk)) | |
| clk_notifier_unregister(priv->clk, &hw->clk_nb); | |
| #endif | |
| } | |
| #ifdef CONFIG_PM_SLEEP | |
| int img_ir_suspend(struct device *dev) | |
| { | |
| struct img_ir_priv *priv = dev_get_drvdata(dev); | |
| if (device_may_wakeup(dev) && img_ir_enable_wake(priv)) | |
| enable_irq_wake(priv->irq); | |
| return 0; | |
| } | |
| int img_ir_resume(struct device *dev) | |
| { | |
| struct img_ir_priv *priv = dev_get_drvdata(dev); | |
| if (device_may_wakeup(dev) && img_ir_disable_wake(priv)) | |
| disable_irq_wake(priv->irq); | |
| return 0; | |
| } | |
| #endif /* CONFIG_PM_SLEEP */ |