| /* | |
| * For Philips TEA5767 FM Chip used on some TV Cards like Prolink Pixelview | |
| * I2C address is allways 0xC0. | |
| * | |
| * | |
| * Copyright (c) 2005 Mauro Carvalho Chehab (mchehab@infradead.org) | |
| * This code is placed under the terms of the GNU General Public License | |
| * | |
| * tea5767 autodetection thanks to Torsten Seeboth and Atsushi Nakagawa | |
| * from their contributions on DScaler. | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/i2c.h> | |
| #include <linux/slab.h> | |
| #include <linux/delay.h> | |
| #include <linux/videodev2.h> | |
| #include "tuner-i2c.h" | |
| #include "tea5767.h" | |
| static int debug; | |
| module_param(debug, int, 0644); | |
| MODULE_PARM_DESC(debug, "enable verbose debug messages"); | |
| /*****************************************************************************/ | |
| struct tea5767_priv { | |
| struct tuner_i2c_props i2c_props; | |
| u32 frequency; | |
| struct tea5767_ctrl ctrl; | |
| }; | |
| /*****************************************************************************/ | |
| /****************************** | |
| * Write mode register values * | |
| ******************************/ | |
| /* First register */ | |
| #define TEA5767_MUTE 0x80 /* Mutes output */ | |
| #define TEA5767_SEARCH 0x40 /* Activates station search */ | |
| /* Bits 0-5 for divider MSB */ | |
| /* Second register */ | |
| /* Bits 0-7 for divider LSB */ | |
| /* Third register */ | |
| /* Station search from botton to up */ | |
| #define TEA5767_SEARCH_UP 0x80 | |
| /* Searches with ADC output = 10 */ | |
| #define TEA5767_SRCH_HIGH_LVL 0x60 | |
| /* Searches with ADC output = 10 */ | |
| #define TEA5767_SRCH_MID_LVL 0x40 | |
| /* Searches with ADC output = 5 */ | |
| #define TEA5767_SRCH_LOW_LVL 0x20 | |
| /* if on, div=4*(Frf+Fif)/Fref otherwise, div=4*(Frf-Fif)/Freq) */ | |
| #define TEA5767_HIGH_LO_INJECT 0x10 | |
| /* Disable stereo */ | |
| #define TEA5767_MONO 0x08 | |
| /* Disable right channel and turns to mono */ | |
| #define TEA5767_MUTE_RIGHT 0x04 | |
| /* Disable left channel and turns to mono */ | |
| #define TEA5767_MUTE_LEFT 0x02 | |
| #define TEA5767_PORT1_HIGH 0x01 | |
| /* Fourth register */ | |
| #define TEA5767_PORT2_HIGH 0x80 | |
| /* Chips stops working. Only I2C bus remains on */ | |
| #define TEA5767_STDBY 0x40 | |
| /* Japan freq (76-108 MHz. If disabled, 87.5-108 MHz */ | |
| #define TEA5767_JAPAN_BAND 0x20 | |
| /* Unselected means 32.768 KHz freq as reference. Otherwise Xtal at 13 MHz */ | |
| #define TEA5767_XTAL_32768 0x10 | |
| /* Cuts weak signals */ | |
| #define TEA5767_SOFT_MUTE 0x08 | |
| /* Activates high cut control */ | |
| #define TEA5767_HIGH_CUT_CTRL 0x04 | |
| /* Activates stereo noise control */ | |
| #define TEA5767_ST_NOISE_CTL 0x02 | |
| /* If activate PORT 1 indicates SEARCH or else it is used as PORT1 */ | |
| #define TEA5767_SRCH_IND 0x01 | |
| /* Fifth register */ | |
| /* By activating, it will use Xtal at 13 MHz as reference for divider */ | |
| #define TEA5767_PLLREF_ENABLE 0x80 | |
| /* By activating, deemphasis=50, or else, deemphasis of 50us */ | |
| #define TEA5767_DEEMPH_75 0X40 | |
| /***************************** | |
| * Read mode register values * | |
| *****************************/ | |
| /* First register */ | |
| #define TEA5767_READY_FLAG_MASK 0x80 | |
| #define TEA5767_BAND_LIMIT_MASK 0X40 | |
| /* Bits 0-5 for divider MSB after search or preset */ | |
| /* Second register */ | |
| /* Bits 0-7 for divider LSB after search or preset */ | |
| /* Third register */ | |
| #define TEA5767_STEREO_MASK 0x80 | |
| #define TEA5767_IF_CNTR_MASK 0x7f | |
| /* Fourth register */ | |
| #define TEA5767_ADC_LEVEL_MASK 0xf0 | |
| /* should be 0 */ | |
| #define TEA5767_CHIP_ID_MASK 0x0f | |
| /* Fifth register */ | |
| /* Reserved for future extensions */ | |
| #define TEA5767_RESERVED_MASK 0xff | |
| /*****************************************************************************/ | |
| static void tea5767_status_dump(struct tea5767_priv *priv, | |
| unsigned char *buffer) | |
| { | |
| unsigned int div, frq; | |
| if (TEA5767_READY_FLAG_MASK & buffer[0]) | |
| tuner_info("Ready Flag ON\n"); | |
| else | |
| tuner_info("Ready Flag OFF\n"); | |
| if (TEA5767_BAND_LIMIT_MASK & buffer[0]) | |
| tuner_info("Tuner at band limit\n"); | |
| else | |
| tuner_info("Tuner not at band limit\n"); | |
| div = ((buffer[0] & 0x3f) << 8) | buffer[1]; | |
| switch (priv->ctrl.xtal_freq) { | |
| case TEA5767_HIGH_LO_13MHz: | |
| frq = (div * 50000 - 700000 - 225000) / 4; /* Freq in KHz */ | |
| break; | |
| case TEA5767_LOW_LO_13MHz: | |
| frq = (div * 50000 + 700000 + 225000) / 4; /* Freq in KHz */ | |
| break; | |
| case TEA5767_LOW_LO_32768: | |
| frq = (div * 32768 + 700000 + 225000) / 4; /* Freq in KHz */ | |
| break; | |
| case TEA5767_HIGH_LO_32768: | |
| default: | |
| frq = (div * 32768 - 700000 - 225000) / 4; /* Freq in KHz */ | |
| break; | |
| } | |
| buffer[0] = (div >> 8) & 0x3f; | |
| buffer[1] = div & 0xff; | |
| tuner_info("Frequency %d.%03d KHz (divider = 0x%04x)\n", | |
| frq / 1000, frq % 1000, div); | |
| if (TEA5767_STEREO_MASK & buffer[2]) | |
| tuner_info("Stereo\n"); | |
| else | |
| tuner_info("Mono\n"); | |
| tuner_info("IF Counter = %d\n", buffer[2] & TEA5767_IF_CNTR_MASK); | |
| tuner_info("ADC Level = %d\n", | |
| (buffer[3] & TEA5767_ADC_LEVEL_MASK) >> 4); | |
| tuner_info("Chip ID = %d\n", (buffer[3] & TEA5767_CHIP_ID_MASK)); | |
| tuner_info("Reserved = 0x%02x\n", | |
| (buffer[4] & TEA5767_RESERVED_MASK)); | |
| } | |
| /* Freq should be specifyed at 62.5 Hz */ | |
| static int set_radio_freq(struct dvb_frontend *fe, | |
| struct analog_parameters *params) | |
| { | |
| struct tea5767_priv *priv = fe->tuner_priv; | |
| unsigned int frq = params->frequency; | |
| unsigned char buffer[5]; | |
| unsigned div; | |
| int rc; | |
| tuner_dbg("radio freq = %d.%03d MHz\n", frq/16000,(frq/16)%1000); | |
| buffer[2] = 0; | |
| if (priv->ctrl.port1) | |
| buffer[2] |= TEA5767_PORT1_HIGH; | |
| if (params->audmode == V4L2_TUNER_MODE_MONO) { | |
| tuner_dbg("TEA5767 set to mono\n"); | |
| buffer[2] |= TEA5767_MONO; | |
| } else { | |
| tuner_dbg("TEA5767 set to stereo\n"); | |
| } | |
| buffer[3] = 0; | |
| if (priv->ctrl.port2) | |
| buffer[3] |= TEA5767_PORT2_HIGH; | |
| if (priv->ctrl.high_cut) | |
| buffer[3] |= TEA5767_HIGH_CUT_CTRL; | |
| if (priv->ctrl.st_noise) | |
| buffer[3] |= TEA5767_ST_NOISE_CTL; | |
| if (priv->ctrl.soft_mute) | |
| buffer[3] |= TEA5767_SOFT_MUTE; | |
| if (priv->ctrl.japan_band) | |
| buffer[3] |= TEA5767_JAPAN_BAND; | |
| buffer[4] = 0; | |
| if (priv->ctrl.deemph_75) | |
| buffer[4] |= TEA5767_DEEMPH_75; | |
| if (priv->ctrl.pllref) | |
| buffer[4] |= TEA5767_PLLREF_ENABLE; | |
| /* Rounds freq to next decimal value - for 62.5 KHz step */ | |
| /* frq = 20*(frq/16)+radio_frq[frq%16]; */ | |
| switch (priv->ctrl.xtal_freq) { | |
| case TEA5767_HIGH_LO_13MHz: | |
| tuner_dbg("radio HIGH LO inject xtal @ 13 MHz\n"); | |
| buffer[2] |= TEA5767_HIGH_LO_INJECT; | |
| div = (frq * (4000 / 16) + 700000 + 225000 + 25000) / 50000; | |
| break; | |
| case TEA5767_LOW_LO_13MHz: | |
| tuner_dbg("radio LOW LO inject xtal @ 13 MHz\n"); | |
| div = (frq * (4000 / 16) - 700000 - 225000 + 25000) / 50000; | |
| break; | |
| case TEA5767_LOW_LO_32768: | |
| tuner_dbg("radio LOW LO inject xtal @ 32,768 MHz\n"); | |
| buffer[3] |= TEA5767_XTAL_32768; | |
| /* const 700=4000*175 Khz - to adjust freq to right value */ | |
| div = ((frq * (4000 / 16) - 700000 - 225000) + 16384) >> 15; | |
| break; | |
| case TEA5767_HIGH_LO_32768: | |
| default: | |
| tuner_dbg("radio HIGH LO inject xtal @ 32,768 MHz\n"); | |
| buffer[2] |= TEA5767_HIGH_LO_INJECT; | |
| buffer[3] |= TEA5767_XTAL_32768; | |
| div = ((frq * (4000 / 16) + 700000 + 225000) + 16384) >> 15; | |
| break; | |
| } | |
| buffer[0] = (div >> 8) & 0x3f; | |
| buffer[1] = div & 0xff; | |
| if (5 != (rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 5))) | |
| tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc); | |
| if (debug) { | |
| if (5 != (rc = tuner_i2c_xfer_recv(&priv->i2c_props, buffer, 5))) | |
| tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc); | |
| else | |
| tea5767_status_dump(priv, buffer); | |
| } | |
| priv->frequency = frq * 125 / 2; | |
| return 0; | |
| } | |
| static int tea5767_read_status(struct dvb_frontend *fe, char *buffer) | |
| { | |
| struct tea5767_priv *priv = fe->tuner_priv; | |
| int rc; | |
| memset(buffer, 0, 5); | |
| if (5 != (rc = tuner_i2c_xfer_recv(&priv->i2c_props, buffer, 5))) { | |
| tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc); | |
| return -EREMOTEIO; | |
| } | |
| return 0; | |
| } | |
| static inline int tea5767_signal(struct dvb_frontend *fe, const char *buffer) | |
| { | |
| struct tea5767_priv *priv = fe->tuner_priv; | |
| int signal = ((buffer[3] & TEA5767_ADC_LEVEL_MASK) << 8); | |
| tuner_dbg("Signal strength: %d\n", signal); | |
| return signal; | |
| } | |
| static inline int tea5767_stereo(struct dvb_frontend *fe, const char *buffer) | |
| { | |
| struct tea5767_priv *priv = fe->tuner_priv; | |
| int stereo = buffer[2] & TEA5767_STEREO_MASK; | |
| tuner_dbg("Radio ST GET = %02x\n", stereo); | |
| return (stereo ? V4L2_TUNER_SUB_STEREO : 0); | |
| } | |
| static int tea5767_get_status(struct dvb_frontend *fe, u32 *status) | |
| { | |
| unsigned char buffer[5]; | |
| *status = 0; | |
| if (0 == tea5767_read_status(fe, buffer)) { | |
| if (tea5767_signal(fe, buffer)) | |
| *status = TUNER_STATUS_LOCKED; | |
| if (tea5767_stereo(fe, buffer)) | |
| *status |= TUNER_STATUS_STEREO; | |
| } | |
| return 0; | |
| } | |
| static int tea5767_get_rf_strength(struct dvb_frontend *fe, u16 *strength) | |
| { | |
| unsigned char buffer[5]; | |
| *strength = 0; | |
| if (0 == tea5767_read_status(fe, buffer)) | |
| *strength = tea5767_signal(fe, buffer); | |
| return 0; | |
| } | |
| static int tea5767_standby(struct dvb_frontend *fe) | |
| { | |
| unsigned char buffer[5]; | |
| struct tea5767_priv *priv = fe->tuner_priv; | |
| unsigned div, rc; | |
| div = (87500 * 4 + 700 + 225 + 25) / 50; /* Set frequency to 87.5 MHz */ | |
| buffer[0] = (div >> 8) & 0x3f; | |
| buffer[1] = div & 0xff; | |
| buffer[2] = TEA5767_PORT1_HIGH; | |
| buffer[3] = TEA5767_PORT2_HIGH | TEA5767_HIGH_CUT_CTRL | | |
| TEA5767_ST_NOISE_CTL | TEA5767_JAPAN_BAND | TEA5767_STDBY; | |
| buffer[4] = 0; | |
| if (5 != (rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 5))) | |
| tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc); | |
| return 0; | |
| } | |
| int tea5767_autodetection(struct i2c_adapter* i2c_adap, u8 i2c_addr) | |
| { | |
| struct tuner_i2c_props i2c = { .adap = i2c_adap, .addr = i2c_addr }; | |
| unsigned char buffer[7] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; | |
| int rc; | |
| if ((rc = tuner_i2c_xfer_recv(&i2c, buffer, 7))< 5) { | |
| pr_warn("It is not a TEA5767. Received %i bytes.\n", rc); | |
| return -EINVAL; | |
| } | |
| /* If all bytes are the same then it's a TV tuner and not a tea5767 */ | |
| if (buffer[0] == buffer[1] && buffer[0] == buffer[2] && | |
| buffer[0] == buffer[3] && buffer[0] == buffer[4]) { | |
| pr_warn("All bytes are equal. It is not a TEA5767\n"); | |
| return -EINVAL; | |
| } | |
| /* Status bytes: | |
| * Byte 4: bit 3:1 : CI (Chip Identification) == 0 | |
| * bit 0 : internally set to 0 | |
| * Byte 5: bit 7:0 : == 0 | |
| */ | |
| if (((buffer[3] & 0x0f) != 0x00) || (buffer[4] != 0x00)) { | |
| pr_warn("Chip ID is not zero. It is not a TEA5767\n"); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int tea5767_release(struct dvb_frontend *fe) | |
| { | |
| kfree(fe->tuner_priv); | |
| fe->tuner_priv = NULL; | |
| return 0; | |
| } | |
| static int tea5767_get_frequency(struct dvb_frontend *fe, u32 *frequency) | |
| { | |
| struct tea5767_priv *priv = fe->tuner_priv; | |
| *frequency = priv->frequency; | |
| return 0; | |
| } | |
| static int tea5767_set_config (struct dvb_frontend *fe, void *priv_cfg) | |
| { | |
| struct tea5767_priv *priv = fe->tuner_priv; | |
| memcpy(&priv->ctrl, priv_cfg, sizeof(priv->ctrl)); | |
| return 0; | |
| } | |
| static const struct dvb_tuner_ops tea5767_tuner_ops = { | |
| .info = { | |
| .name = "tea5767", // Philips TEA5767HN FM Radio | |
| }, | |
| .set_analog_params = set_radio_freq, | |
| .set_config = tea5767_set_config, | |
| .sleep = tea5767_standby, | |
| .release = tea5767_release, | |
| .get_frequency = tea5767_get_frequency, | |
| .get_status = tea5767_get_status, | |
| .get_rf_strength = tea5767_get_rf_strength, | |
| }; | |
| struct dvb_frontend *tea5767_attach(struct dvb_frontend *fe, | |
| struct i2c_adapter* i2c_adap, | |
| u8 i2c_addr) | |
| { | |
| struct tea5767_priv *priv = NULL; | |
| priv = kzalloc(sizeof(struct tea5767_priv), GFP_KERNEL); | |
| if (priv == NULL) | |
| return NULL; | |
| fe->tuner_priv = priv; | |
| priv->i2c_props.addr = i2c_addr; | |
| priv->i2c_props.adap = i2c_adap; | |
| priv->i2c_props.name = "tea5767"; | |
| priv->ctrl.xtal_freq = TEA5767_HIGH_LO_32768; | |
| priv->ctrl.port1 = 1; | |
| priv->ctrl.port2 = 1; | |
| priv->ctrl.high_cut = 1; | |
| priv->ctrl.st_noise = 1; | |
| priv->ctrl.japan_band = 1; | |
| memcpy(&fe->ops.tuner_ops, &tea5767_tuner_ops, | |
| sizeof(struct dvb_tuner_ops)); | |
| tuner_info("type set to %s\n", "Philips TEA5767HN FM Radio"); | |
| return fe; | |
| } | |
| EXPORT_SYMBOL_GPL(tea5767_attach); | |
| EXPORT_SYMBOL_GPL(tea5767_autodetection); | |
| MODULE_DESCRIPTION("Philips TEA5767 FM tuner driver"); | |
| MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>"); | |
| MODULE_LICENSE("GPL"); |