| /* | |
| * USB USBVISION Video device driver 0.9.10 | |
| * | |
| * | |
| * | |
| * Copyright (c) 1999-2005 Joerg Heckenbach <joerg@heckenbach-aw.de> | |
| * | |
| * This module is part of usbvision driver project. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| * | |
| * Let's call the version 0.... until compression decoding is completely | |
| * implemented. | |
| * | |
| * This driver is written by Jose Ignacio Gijon and Joerg Heckenbach. | |
| * It was based on USB CPiA driver written by Peter Pregler, | |
| * Scott J. Bertin and Johannes Erdfelt | |
| * Ideas are taken from bttv driver by Ralph Metzler, Marcus Metzler & | |
| * Gerd Knorr and zoran 36120/36125 driver by Pauline Middelink | |
| * Updates to driver completed by Dwaine P. Garden | |
| * | |
| * | |
| * TODO: | |
| * - use submit_urb for all setup packets | |
| * - Fix memory settings for nt1004. It is 4 times as big as the | |
| * nt1003 memory. | |
| * - Add audio on endpoint 3 for nt1004 chip. | |
| * Seems impossible, needs a codec interface. Which one? | |
| * - Clean up the driver. | |
| * - optimization for performance. | |
| * - Add Videotext capability (VBI). Working on it..... | |
| * - Check audio for other devices | |
| * | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/list.h> | |
| #include <linux/timer.h> | |
| #include <linux/slab.h> | |
| #include <linux/mm.h> | |
| #include <linux/highmem.h> | |
| #include <linux/vmalloc.h> | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/io.h> | |
| #include <linux/videodev2.h> | |
| #include <linux/i2c.h> | |
| #include <media/i2c/saa7115.h> | |
| #include <media/v4l2-common.h> | |
| #include <media/v4l2-ioctl.h> | |
| #include <media/v4l2-event.h> | |
| #include <media/tuner.h> | |
| #include <linux/workqueue.h> | |
| #include "usbvision.h" | |
| #include "usbvision-cards.h" | |
| #define DRIVER_AUTHOR \ | |
| "Joerg Heckenbach <joerg@heckenbach-aw.de>, " \ | |
| "Dwaine Garden <DwaineGarden@rogers.com>" | |
| #define DRIVER_NAME "usbvision" | |
| #define DRIVER_ALIAS "USBVision" | |
| #define DRIVER_DESC "USBVision USB Video Device Driver for Linux" | |
| #define DRIVER_LICENSE "GPL" | |
| #define USBVISION_VERSION_STRING "0.9.11" | |
| #define ENABLE_HEXDUMP 0 /* Enable if you need it */ | |
| #ifdef USBVISION_DEBUG | |
| #define PDEBUG(level, fmt, args...) { \ | |
| if (video_debug & (level)) \ | |
| printk(KERN_INFO KBUILD_MODNAME ":[%s:%d] " fmt, \ | |
| __func__, __LINE__ , ## args); \ | |
| } | |
| #else | |
| #define PDEBUG(level, fmt, args...) do {} while (0) | |
| #endif | |
| #define DBG_IO (1 << 1) | |
| #define DBG_PROBE (1 << 2) | |
| #define DBG_MMAP (1 << 3) | |
| /* String operations */ | |
| #define rmspace(str) while (*str == ' ') str++; | |
| #define goto2next(str) while (*str != ' ') str++; while (*str == ' ') str++; | |
| /* sequential number of usbvision device */ | |
| static int usbvision_nr; | |
| static struct usbvision_v4l2_format_st usbvision_v4l2_format[] = { | |
| { 1, 1, 8, V4L2_PIX_FMT_GREY , "GREY" }, | |
| { 1, 2, 16, V4L2_PIX_FMT_RGB565 , "RGB565" }, | |
| { 1, 3, 24, V4L2_PIX_FMT_RGB24 , "RGB24" }, | |
| { 1, 4, 32, V4L2_PIX_FMT_RGB32 , "RGB32" }, | |
| { 1, 2, 16, V4L2_PIX_FMT_RGB555 , "RGB555" }, | |
| { 1, 2, 16, V4L2_PIX_FMT_YUYV , "YUV422" }, | |
| { 1, 2, 12, V4L2_PIX_FMT_YVU420 , "YUV420P" }, /* 1.5 ! */ | |
| { 1, 2, 16, V4L2_PIX_FMT_YUV422P , "YUV422P" } | |
| }; | |
| /* Function prototypes */ | |
| static void usbvision_release(struct usb_usbvision *usbvision); | |
| /* Default initialization of device driver parameters */ | |
| /* Set the default format for ISOC endpoint */ | |
| static int isoc_mode = ISOC_MODE_COMPRESS; | |
| /* Set the default Debug Mode of the device driver */ | |
| static int video_debug; | |
| /* Sequential Number of Video Device */ | |
| static int video_nr = -1; | |
| /* Sequential Number of Radio Device */ | |
| static int radio_nr = -1; | |
| /* Grab parameters for the device driver */ | |
| /* Showing parameters under SYSFS */ | |
| module_param(isoc_mode, int, 0444); | |
| module_param(video_debug, int, 0444); | |
| module_param(video_nr, int, 0444); | |
| module_param(radio_nr, int, 0444); | |
| MODULE_PARM_DESC(isoc_mode, " Set the default format for ISOC endpoint. Default: 0x60 (Compression On)"); | |
| MODULE_PARM_DESC(video_debug, " Set the default Debug Mode of the device driver. Default: 0 (Off)"); | |
| MODULE_PARM_DESC(video_nr, "Set video device number (/dev/videoX). Default: -1 (autodetect)"); | |
| MODULE_PARM_DESC(radio_nr, "Set radio device number (/dev/radioX). Default: -1 (autodetect)"); | |
| /* Misc stuff */ | |
| MODULE_AUTHOR(DRIVER_AUTHOR); | |
| MODULE_DESCRIPTION(DRIVER_DESC); | |
| MODULE_LICENSE(DRIVER_LICENSE); | |
| MODULE_VERSION(USBVISION_VERSION_STRING); | |
| MODULE_ALIAS(DRIVER_ALIAS); | |
| /*****************************************************************************/ | |
| /* SYSFS Code - Copied from the stv680.c usb module. */ | |
| /* Device information is located at /sys/class/video4linux/video0 */ | |
| /* Device parameters information is located at /sys/module/usbvision */ | |
| /* Device USB Information is located at */ | |
| /* /sys/bus/usb/drivers/USBVision Video Grabber */ | |
| /*****************************************************************************/ | |
| #define YES_NO(x) ((x) ? "Yes" : "No") | |
| static inline struct usb_usbvision *cd_to_usbvision(struct device *cd) | |
| { | |
| struct video_device *vdev = to_video_device(cd); | |
| return video_get_drvdata(vdev); | |
| } | |
| static ssize_t show_version(struct device *cd, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| return sprintf(buf, "%s\n", USBVISION_VERSION_STRING); | |
| } | |
| static DEVICE_ATTR(version, S_IRUGO, show_version, NULL); | |
| static ssize_t show_model(struct device *cd, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct video_device *vdev = to_video_device(cd); | |
| struct usb_usbvision *usbvision = video_get_drvdata(vdev); | |
| return sprintf(buf, "%s\n", | |
| usbvision_device_data[usbvision->dev_model].model_string); | |
| } | |
| static DEVICE_ATTR(model, S_IRUGO, show_model, NULL); | |
| static ssize_t show_hue(struct device *cd, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct video_device *vdev = to_video_device(cd); | |
| struct usb_usbvision *usbvision = video_get_drvdata(vdev); | |
| s32 val = v4l2_ctrl_g_ctrl(v4l2_ctrl_find(&usbvision->hdl, | |
| V4L2_CID_HUE)); | |
| return sprintf(buf, "%d\n", val); | |
| } | |
| static DEVICE_ATTR(hue, S_IRUGO, show_hue, NULL); | |
| static ssize_t show_contrast(struct device *cd, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct video_device *vdev = to_video_device(cd); | |
| struct usb_usbvision *usbvision = video_get_drvdata(vdev); | |
| s32 val = v4l2_ctrl_g_ctrl(v4l2_ctrl_find(&usbvision->hdl, | |
| V4L2_CID_CONTRAST)); | |
| return sprintf(buf, "%d\n", val); | |
| } | |
| static DEVICE_ATTR(contrast, S_IRUGO, show_contrast, NULL); | |
| static ssize_t show_brightness(struct device *cd, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct video_device *vdev = to_video_device(cd); | |
| struct usb_usbvision *usbvision = video_get_drvdata(vdev); | |
| s32 val = v4l2_ctrl_g_ctrl(v4l2_ctrl_find(&usbvision->hdl, | |
| V4L2_CID_BRIGHTNESS)); | |
| return sprintf(buf, "%d\n", val); | |
| } | |
| static DEVICE_ATTR(brightness, S_IRUGO, show_brightness, NULL); | |
| static ssize_t show_saturation(struct device *cd, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct video_device *vdev = to_video_device(cd); | |
| struct usb_usbvision *usbvision = video_get_drvdata(vdev); | |
| s32 val = v4l2_ctrl_g_ctrl(v4l2_ctrl_find(&usbvision->hdl, | |
| V4L2_CID_SATURATION)); | |
| return sprintf(buf, "%d\n", val); | |
| } | |
| static DEVICE_ATTR(saturation, S_IRUGO, show_saturation, NULL); | |
| static ssize_t show_streaming(struct device *cd, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct video_device *vdev = to_video_device(cd); | |
| struct usb_usbvision *usbvision = video_get_drvdata(vdev); | |
| return sprintf(buf, "%s\n", | |
| YES_NO(usbvision->streaming == stream_on ? 1 : 0)); | |
| } | |
| static DEVICE_ATTR(streaming, S_IRUGO, show_streaming, NULL); | |
| static ssize_t show_compression(struct device *cd, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct video_device *vdev = to_video_device(cd); | |
| struct usb_usbvision *usbvision = video_get_drvdata(vdev); | |
| return sprintf(buf, "%s\n", | |
| YES_NO(usbvision->isoc_mode == ISOC_MODE_COMPRESS)); | |
| } | |
| static DEVICE_ATTR(compression, S_IRUGO, show_compression, NULL); | |
| static ssize_t show_device_bridge(struct device *cd, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct video_device *vdev = to_video_device(cd); | |
| struct usb_usbvision *usbvision = video_get_drvdata(vdev); | |
| return sprintf(buf, "%d\n", usbvision->bridge_type); | |
| } | |
| static DEVICE_ATTR(bridge, S_IRUGO, show_device_bridge, NULL); | |
| static void usbvision_create_sysfs(struct video_device *vdev) | |
| { | |
| int res; | |
| if (!vdev) | |
| return; | |
| do { | |
| res = device_create_file(&vdev->dev, &dev_attr_version); | |
| if (res < 0) | |
| break; | |
| res = device_create_file(&vdev->dev, &dev_attr_model); | |
| if (res < 0) | |
| break; | |
| res = device_create_file(&vdev->dev, &dev_attr_hue); | |
| if (res < 0) | |
| break; | |
| res = device_create_file(&vdev->dev, &dev_attr_contrast); | |
| if (res < 0) | |
| break; | |
| res = device_create_file(&vdev->dev, &dev_attr_brightness); | |
| if (res < 0) | |
| break; | |
| res = device_create_file(&vdev->dev, &dev_attr_saturation); | |
| if (res < 0) | |
| break; | |
| res = device_create_file(&vdev->dev, &dev_attr_streaming); | |
| if (res < 0) | |
| break; | |
| res = device_create_file(&vdev->dev, &dev_attr_compression); | |
| if (res < 0) | |
| break; | |
| res = device_create_file(&vdev->dev, &dev_attr_bridge); | |
| if (res >= 0) | |
| return; | |
| } while (0); | |
| dev_err(&vdev->dev, "%s error: %d\n", __func__, res); | |
| } | |
| static void usbvision_remove_sysfs(struct video_device *vdev) | |
| { | |
| if (vdev) { | |
| device_remove_file(&vdev->dev, &dev_attr_version); | |
| device_remove_file(&vdev->dev, &dev_attr_model); | |
| device_remove_file(&vdev->dev, &dev_attr_hue); | |
| device_remove_file(&vdev->dev, &dev_attr_contrast); | |
| device_remove_file(&vdev->dev, &dev_attr_brightness); | |
| device_remove_file(&vdev->dev, &dev_attr_saturation); | |
| device_remove_file(&vdev->dev, &dev_attr_streaming); | |
| device_remove_file(&vdev->dev, &dev_attr_compression); | |
| device_remove_file(&vdev->dev, &dev_attr_bridge); | |
| } | |
| } | |
| /* | |
| * usbvision_open() | |
| * | |
| * This is part of Video 4 Linux API. The driver can be opened by one | |
| * client only (checks internal counter 'usbvision->user'). The procedure | |
| * then allocates buffers needed for video processing. | |
| * | |
| */ | |
| static int usbvision_v4l2_open(struct file *file) | |
| { | |
| struct usb_usbvision *usbvision = video_drvdata(file); | |
| int err_code = 0; | |
| PDEBUG(DBG_IO, "open"); | |
| if (mutex_lock_interruptible(&usbvision->v4l2_lock)) | |
| return -ERESTARTSYS; | |
| if (usbvision->user) { | |
| err_code = -EBUSY; | |
| } else { | |
| err_code = v4l2_fh_open(file); | |
| if (err_code) | |
| goto unlock; | |
| /* Allocate memory for the scratch ring buffer */ | |
| err_code = usbvision_scratch_alloc(usbvision); | |
| if (isoc_mode == ISOC_MODE_COMPRESS) { | |
| /* Allocate intermediate decompression buffers | |
| only if needed */ | |
| err_code = usbvision_decompress_alloc(usbvision); | |
| } | |
| if (err_code) { | |
| /* Deallocate all buffers if trouble */ | |
| usbvision_scratch_free(usbvision); | |
| usbvision_decompress_free(usbvision); | |
| } | |
| } | |
| /* If so far no errors then we shall start the camera */ | |
| if (!err_code) { | |
| /* Send init sequence only once, it's large! */ | |
| if (!usbvision->initialized) { | |
| int setup_ok = 0; | |
| setup_ok = usbvision_setup(usbvision, isoc_mode); | |
| if (setup_ok) | |
| usbvision->initialized = 1; | |
| else | |
| err_code = -EBUSY; | |
| } | |
| if (!err_code) { | |
| usbvision_begin_streaming(usbvision); | |
| err_code = usbvision_init_isoc(usbvision); | |
| /* device must be initialized before isoc transfer */ | |
| usbvision_muxsel(usbvision, 0); | |
| /* prepare queues */ | |
| usbvision_empty_framequeues(usbvision); | |
| usbvision->user++; | |
| } | |
| } | |
| unlock: | |
| mutex_unlock(&usbvision->v4l2_lock); | |
| PDEBUG(DBG_IO, "success"); | |
| return err_code; | |
| } | |
| /* | |
| * usbvision_v4l2_close() | |
| * | |
| * This is part of Video 4 Linux API. The procedure | |
| * stops streaming and deallocates all buffers that were earlier | |
| * allocated in usbvision_v4l2_open(). | |
| * | |
| */ | |
| static int usbvision_v4l2_close(struct file *file) | |
| { | |
| struct usb_usbvision *usbvision = video_drvdata(file); | |
| PDEBUG(DBG_IO, "close"); | |
| mutex_lock(&usbvision->v4l2_lock); | |
| usbvision_audio_off(usbvision); | |
| usbvision_restart_isoc(usbvision); | |
| usbvision_stop_isoc(usbvision); | |
| usbvision_decompress_free(usbvision); | |
| usbvision_frames_free(usbvision); | |
| usbvision_empty_framequeues(usbvision); | |
| usbvision_scratch_free(usbvision); | |
| usbvision->user--; | |
| mutex_unlock(&usbvision->v4l2_lock); | |
| if (usbvision->remove_pending) { | |
| printk(KERN_INFO "%s: Final disconnect\n", __func__); | |
| usbvision_release(usbvision); | |
| return 0; | |
| } | |
| PDEBUG(DBG_IO, "success"); | |
| return v4l2_fh_release(file); | |
| } | |
| /* | |
| * usbvision_ioctl() | |
| * | |
| * This is part of Video 4 Linux API. The procedure handles ioctl() calls. | |
| * | |
| */ | |
| #ifdef CONFIG_VIDEO_ADV_DEBUG | |
| static int vidioc_g_register(struct file *file, void *priv, | |
| struct v4l2_dbg_register *reg) | |
| { | |
| struct usb_usbvision *usbvision = video_drvdata(file); | |
| int err_code; | |
| /* NT100x has a 8-bit register space */ | |
| err_code = usbvision_read_reg(usbvision, reg->reg&0xff); | |
| if (err_code < 0) { | |
| dev_err(&usbvision->vdev.dev, | |
| "%s: VIDIOC_DBG_G_REGISTER failed: error %d\n", | |
| __func__, err_code); | |
| return err_code; | |
| } | |
| reg->val = err_code; | |
| reg->size = 1; | |
| return 0; | |
| } | |
| static int vidioc_s_register(struct file *file, void *priv, | |
| const struct v4l2_dbg_register *reg) | |
| { | |
| struct usb_usbvision *usbvision = video_drvdata(file); | |
| int err_code; | |
| /* NT100x has a 8-bit register space */ | |
| err_code = usbvision_write_reg(usbvision, reg->reg & 0xff, reg->val); | |
| if (err_code < 0) { | |
| dev_err(&usbvision->vdev.dev, | |
| "%s: VIDIOC_DBG_S_REGISTER failed: error %d\n", | |
| __func__, err_code); | |
| return err_code; | |
| } | |
| return 0; | |
| } | |
| #endif | |
| static int vidioc_querycap(struct file *file, void *priv, | |
| struct v4l2_capability *vc) | |
| { | |
| struct usb_usbvision *usbvision = video_drvdata(file); | |
| struct video_device *vdev = video_devdata(file); | |
| strlcpy(vc->driver, "USBVision", sizeof(vc->driver)); | |
| strlcpy(vc->card, | |
| usbvision_device_data[usbvision->dev_model].model_string, | |
| sizeof(vc->card)); | |
| usb_make_path(usbvision->dev, vc->bus_info, sizeof(vc->bus_info)); | |
| vc->device_caps = usbvision->have_tuner ? V4L2_CAP_TUNER : 0; | |
| if (vdev->vfl_type == VFL_TYPE_GRABBER) | |
| vc->device_caps |= V4L2_CAP_VIDEO_CAPTURE | | |
| V4L2_CAP_READWRITE | V4L2_CAP_STREAMING; | |
| else | |
| vc->device_caps |= V4L2_CAP_RADIO; | |
| vc->capabilities = vc->device_caps | V4L2_CAP_VIDEO_CAPTURE | | |
| V4L2_CAP_READWRITE | V4L2_CAP_STREAMING | V4L2_CAP_DEVICE_CAPS; | |
| if (usbvision_device_data[usbvision->dev_model].radio) | |
| vc->capabilities |= V4L2_CAP_RADIO; | |
| return 0; | |
| } | |
| static int vidioc_enum_input(struct file *file, void *priv, | |
| struct v4l2_input *vi) | |
| { | |
| struct usb_usbvision *usbvision = video_drvdata(file); | |
| int chan; | |
| if (vi->index >= usbvision->video_inputs) | |
| return -EINVAL; | |
| if (usbvision->have_tuner) | |
| chan = vi->index; | |
| else | |
| chan = vi->index + 1; /* skip Television string*/ | |
| /* Determine the requested input characteristics | |
| specific for each usbvision card model */ | |
| switch (chan) { | |
| case 0: | |
| if (usbvision_device_data[usbvision->dev_model].video_channels == 4) { | |
| strcpy(vi->name, "White Video Input"); | |
| } else { | |
| strcpy(vi->name, "Television"); | |
| vi->type = V4L2_INPUT_TYPE_TUNER; | |
| vi->tuner = chan; | |
| vi->std = USBVISION_NORMS; | |
| } | |
| break; | |
| case 1: | |
| vi->type = V4L2_INPUT_TYPE_CAMERA; | |
| if (usbvision_device_data[usbvision->dev_model].video_channels == 4) | |
| strcpy(vi->name, "Green Video Input"); | |
| else | |
| strcpy(vi->name, "Composite Video Input"); | |
| vi->std = USBVISION_NORMS; | |
| break; | |
| case 2: | |
| vi->type = V4L2_INPUT_TYPE_CAMERA; | |
| if (usbvision_device_data[usbvision->dev_model].video_channels == 4) | |
| strcpy(vi->name, "Yellow Video Input"); | |
| else | |
| strcpy(vi->name, "S-Video Input"); | |
| vi->std = USBVISION_NORMS; | |
| break; | |
| case 3: | |
| vi->type = V4L2_INPUT_TYPE_CAMERA; | |
| strcpy(vi->name, "Red Video Input"); | |
| vi->std = USBVISION_NORMS; | |
| break; | |
| } | |
| return 0; | |
| } | |
| static int vidioc_g_input(struct file *file, void *priv, unsigned int *input) | |
| { | |
| struct usb_usbvision *usbvision = video_drvdata(file); | |
| *input = usbvision->ctl_input; | |
| return 0; | |
| } | |
| static int vidioc_s_input(struct file *file, void *priv, unsigned int input) | |
| { | |
| struct usb_usbvision *usbvision = video_drvdata(file); | |
| if (input >= usbvision->video_inputs) | |
| return -EINVAL; | |
| usbvision_muxsel(usbvision, input); | |
| usbvision_set_input(usbvision); | |
| usbvision_set_output(usbvision, | |
| usbvision->curwidth, | |
| usbvision->curheight); | |
| return 0; | |
| } | |
| static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id id) | |
| { | |
| struct usb_usbvision *usbvision = video_drvdata(file); | |
| usbvision->tvnorm_id = id; | |
| call_all(usbvision, video, s_std, usbvision->tvnorm_id); | |
| /* propagate the change to the decoder */ | |
| usbvision_muxsel(usbvision, usbvision->ctl_input); | |
| return 0; | |
| } | |
| static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *id) | |
| { | |
| struct usb_usbvision *usbvision = video_drvdata(file); | |
| *id = usbvision->tvnorm_id; | |
| return 0; | |
| } | |
| static int vidioc_g_tuner(struct file *file, void *priv, | |
| struct v4l2_tuner *vt) | |
| { | |
| struct usb_usbvision *usbvision = video_drvdata(file); | |
| if (vt->index) /* Only tuner 0 */ | |
| return -EINVAL; | |
| if (vt->type == V4L2_TUNER_RADIO) | |
| strcpy(vt->name, "Radio"); | |
| else | |
| strcpy(vt->name, "Television"); | |
| /* Let clients fill in the remainder of this struct */ | |
| call_all(usbvision, tuner, g_tuner, vt); | |
| return 0; | |
| } | |
| static int vidioc_s_tuner(struct file *file, void *priv, | |
| const struct v4l2_tuner *vt) | |
| { | |
| struct usb_usbvision *usbvision = video_drvdata(file); | |
| /* Only one tuner for now */ | |
| if (vt->index) | |
| return -EINVAL; | |
| /* let clients handle this */ | |
| call_all(usbvision, tuner, s_tuner, vt); | |
| return 0; | |
| } | |
| static int vidioc_g_frequency(struct file *file, void *priv, | |
| struct v4l2_frequency *freq) | |
| { | |
| struct usb_usbvision *usbvision = video_drvdata(file); | |
| /* Only one tuner */ | |
| if (freq->tuner) | |
| return -EINVAL; | |
| if (freq->type == V4L2_TUNER_RADIO) | |
| freq->frequency = usbvision->radio_freq; | |
| else | |
| freq->frequency = usbvision->tv_freq; | |
| return 0; | |
| } | |
| static int vidioc_s_frequency(struct file *file, void *priv, | |
| const struct v4l2_frequency *freq) | |
| { | |
| struct usb_usbvision *usbvision = video_drvdata(file); | |
| struct v4l2_frequency new_freq = *freq; | |
| /* Only one tuner for now */ | |
| if (freq->tuner) | |
| return -EINVAL; | |
| call_all(usbvision, tuner, s_frequency, freq); | |
| call_all(usbvision, tuner, g_frequency, &new_freq); | |
| if (freq->type == V4L2_TUNER_RADIO) | |
| usbvision->radio_freq = new_freq.frequency; | |
| else | |
| usbvision->tv_freq = new_freq.frequency; | |
| return 0; | |
| } | |
| static int vidioc_reqbufs(struct file *file, | |
| void *priv, struct v4l2_requestbuffers *vr) | |
| { | |
| struct usb_usbvision *usbvision = video_drvdata(file); | |
| int ret; | |
| RESTRICT_TO_RANGE(vr->count, 1, USBVISION_NUMFRAMES); | |
| /* Check input validity: | |
| the user must do a VIDEO CAPTURE and MMAP method. */ | |
| if (vr->memory != V4L2_MEMORY_MMAP) | |
| return -EINVAL; | |
| if (usbvision->streaming == stream_on) { | |
| ret = usbvision_stream_interrupt(usbvision); | |
| if (ret) | |
| return ret; | |
| } | |
| usbvision_frames_free(usbvision); | |
| usbvision_empty_framequeues(usbvision); | |
| vr->count = usbvision_frames_alloc(usbvision, vr->count); | |
| usbvision->cur_frame = NULL; | |
| return 0; | |
| } | |
| static int vidioc_querybuf(struct file *file, | |
| void *priv, struct v4l2_buffer *vb) | |
| { | |
| struct usb_usbvision *usbvision = video_drvdata(file); | |
| struct usbvision_frame *frame; | |
| /* FIXME : must control | |
| that buffers are mapped (VIDIOC_REQBUFS has been called) */ | |
| if (vb->index >= usbvision->num_frames) | |
| return -EINVAL; | |
| /* Updating the corresponding frame state */ | |
| vb->flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; | |
| frame = &usbvision->frame[vb->index]; | |
| if (frame->grabstate >= frame_state_ready) | |
| vb->flags |= V4L2_BUF_FLAG_QUEUED; | |
| if (frame->grabstate >= frame_state_done) | |
| vb->flags |= V4L2_BUF_FLAG_DONE; | |
| if (frame->grabstate == frame_state_unused) | |
| vb->flags |= V4L2_BUF_FLAG_MAPPED; | |
| vb->memory = V4L2_MEMORY_MMAP; | |
| vb->m.offset = vb->index * PAGE_ALIGN(usbvision->max_frame_size); | |
| vb->memory = V4L2_MEMORY_MMAP; | |
| vb->field = V4L2_FIELD_NONE; | |
| vb->length = usbvision->curwidth * | |
| usbvision->curheight * | |
| usbvision->palette.bytes_per_pixel; | |
| vb->timestamp = usbvision->frame[vb->index].timestamp; | |
| vb->sequence = usbvision->frame[vb->index].sequence; | |
| return 0; | |
| } | |
| static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *vb) | |
| { | |
| struct usb_usbvision *usbvision = video_drvdata(file); | |
| struct usbvision_frame *frame; | |
| unsigned long lock_flags; | |
| /* FIXME : works only on VIDEO_CAPTURE MODE, MMAP. */ | |
| if (vb->index >= usbvision->num_frames) | |
| return -EINVAL; | |
| frame = &usbvision->frame[vb->index]; | |
| if (frame->grabstate != frame_state_unused) | |
| return -EAGAIN; | |
| /* Mark it as ready and enqueue frame */ | |
| frame->grabstate = frame_state_ready; | |
| frame->scanstate = scan_state_scanning; | |
| frame->scanlength = 0; /* Accumulated in usbvision_parse_data() */ | |
| vb->flags &= ~V4L2_BUF_FLAG_DONE; | |
| /* set v4l2_format index */ | |
| frame->v4l2_format = usbvision->palette; | |
| spin_lock_irqsave(&usbvision->queue_lock, lock_flags); | |
| list_add_tail(&usbvision->frame[vb->index].frame, &usbvision->inqueue); | |
| spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags); | |
| return 0; | |
| } | |
| static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *vb) | |
| { | |
| struct usb_usbvision *usbvision = video_drvdata(file); | |
| int ret; | |
| struct usbvision_frame *f; | |
| unsigned long lock_flags; | |
| if (list_empty(&(usbvision->outqueue))) { | |
| if (usbvision->streaming == stream_idle) | |
| return -EINVAL; | |
| ret = wait_event_interruptible | |
| (usbvision->wait_frame, | |
| !list_empty(&(usbvision->outqueue))); | |
| if (ret) | |
| return ret; | |
| } | |
| spin_lock_irqsave(&usbvision->queue_lock, lock_flags); | |
| f = list_entry(usbvision->outqueue.next, | |
| struct usbvision_frame, frame); | |
| list_del(usbvision->outqueue.next); | |
| spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags); | |
| f->grabstate = frame_state_unused; | |
| vb->memory = V4L2_MEMORY_MMAP; | |
| vb->flags = V4L2_BUF_FLAG_MAPPED | | |
| V4L2_BUF_FLAG_QUEUED | | |
| V4L2_BUF_FLAG_DONE | | |
| V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; | |
| vb->index = f->index; | |
| vb->sequence = f->sequence; | |
| vb->timestamp = f->timestamp; | |
| vb->field = V4L2_FIELD_NONE; | |
| vb->bytesused = f->scanlength; | |
| return 0; | |
| } | |
| static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i) | |
| { | |
| struct usb_usbvision *usbvision = video_drvdata(file); | |
| usbvision->streaming = stream_on; | |
| call_all(usbvision, video, s_stream, 1); | |
| return 0; | |
| } | |
| static int vidioc_streamoff(struct file *file, | |
| void *priv, enum v4l2_buf_type type) | |
| { | |
| struct usb_usbvision *usbvision = video_drvdata(file); | |
| if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE) | |
| return -EINVAL; | |
| if (usbvision->streaming == stream_on) { | |
| usbvision_stream_interrupt(usbvision); | |
| /* Stop all video streamings */ | |
| call_all(usbvision, video, s_stream, 0); | |
| } | |
| usbvision_empty_framequeues(usbvision); | |
| return 0; | |
| } | |
| static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, | |
| struct v4l2_fmtdesc *vfd) | |
| { | |
| if (vfd->index >= USBVISION_SUPPORTED_PALETTES - 1) | |
| return -EINVAL; | |
| strcpy(vfd->description, usbvision_v4l2_format[vfd->index].desc); | |
| vfd->pixelformat = usbvision_v4l2_format[vfd->index].format; | |
| return 0; | |
| } | |
| static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, | |
| struct v4l2_format *vf) | |
| { | |
| struct usb_usbvision *usbvision = video_drvdata(file); | |
| vf->fmt.pix.width = usbvision->curwidth; | |
| vf->fmt.pix.height = usbvision->curheight; | |
| vf->fmt.pix.pixelformat = usbvision->palette.format; | |
| vf->fmt.pix.bytesperline = | |
| usbvision->curwidth * usbvision->palette.bytes_per_pixel; | |
| vf->fmt.pix.sizeimage = vf->fmt.pix.bytesperline * usbvision->curheight; | |
| vf->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; | |
| vf->fmt.pix.field = V4L2_FIELD_NONE; /* Always progressive image */ | |
| return 0; | |
| } | |
| static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, | |
| struct v4l2_format *vf) | |
| { | |
| struct usb_usbvision *usbvision = video_drvdata(file); | |
| int format_idx; | |
| /* Find requested format in available ones */ | |
| for (format_idx = 0; format_idx < USBVISION_SUPPORTED_PALETTES; format_idx++) { | |
| if (vf->fmt.pix.pixelformat == | |
| usbvision_v4l2_format[format_idx].format) { | |
| usbvision->palette = usbvision_v4l2_format[format_idx]; | |
| break; | |
| } | |
| } | |
| /* robustness */ | |
| if (format_idx == USBVISION_SUPPORTED_PALETTES) | |
| return -EINVAL; | |
| RESTRICT_TO_RANGE(vf->fmt.pix.width, MIN_FRAME_WIDTH, MAX_FRAME_WIDTH); | |
| RESTRICT_TO_RANGE(vf->fmt.pix.height, MIN_FRAME_HEIGHT, MAX_FRAME_HEIGHT); | |
| vf->fmt.pix.bytesperline = vf->fmt.pix.width* | |
| usbvision->palette.bytes_per_pixel; | |
| vf->fmt.pix.sizeimage = vf->fmt.pix.bytesperline*vf->fmt.pix.height; | |
| vf->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; | |
| vf->fmt.pix.field = V4L2_FIELD_NONE; /* Always progressive image */ | |
| return 0; | |
| } | |
| static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, | |
| struct v4l2_format *vf) | |
| { | |
| struct usb_usbvision *usbvision = video_drvdata(file); | |
| int ret; | |
| ret = vidioc_try_fmt_vid_cap(file, priv, vf); | |
| if (ret) | |
| return ret; | |
| /* stop io in case it is already in progress */ | |
| if (usbvision->streaming == stream_on) { | |
| ret = usbvision_stream_interrupt(usbvision); | |
| if (ret) | |
| return ret; | |
| } | |
| usbvision_frames_free(usbvision); | |
| usbvision_empty_framequeues(usbvision); | |
| usbvision->cur_frame = NULL; | |
| /* by now we are committed to the new data... */ | |
| usbvision_set_output(usbvision, vf->fmt.pix.width, vf->fmt.pix.height); | |
| return 0; | |
| } | |
| static ssize_t usbvision_read(struct file *file, char __user *buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct usb_usbvision *usbvision = video_drvdata(file); | |
| int noblock = file->f_flags & O_NONBLOCK; | |
| unsigned long lock_flags; | |
| int ret, i; | |
| struct usbvision_frame *frame; | |
| PDEBUG(DBG_IO, "%s: %ld bytes, noblock=%d", __func__, | |
| (unsigned long)count, noblock); | |
| if (!USBVISION_IS_OPERATIONAL(usbvision) || (buf == NULL)) | |
| return -EFAULT; | |
| /* This entry point is compatible with the mmap routines | |
| so that a user can do either VIDIOC_QBUF/VIDIOC_DQBUF | |
| to get frames or call read on the device. */ | |
| if (!usbvision->num_frames) { | |
| /* First, allocate some frames to work with | |
| if this has not been done with VIDIOC_REQBUF */ | |
| usbvision_frames_free(usbvision); | |
| usbvision_empty_framequeues(usbvision); | |
| usbvision_frames_alloc(usbvision, USBVISION_NUMFRAMES); | |
| } | |
| if (usbvision->streaming != stream_on) { | |
| /* no stream is running, make it running ! */ | |
| usbvision->streaming = stream_on; | |
| call_all(usbvision, video, s_stream, 1); | |
| } | |
| /* Then, enqueue as many frames as possible | |
| (like a user of VIDIOC_QBUF would do) */ | |
| for (i = 0; i < usbvision->num_frames; i++) { | |
| frame = &usbvision->frame[i]; | |
| if (frame->grabstate == frame_state_unused) { | |
| /* Mark it as ready and enqueue frame */ | |
| frame->grabstate = frame_state_ready; | |
| frame->scanstate = scan_state_scanning; | |
| /* Accumulated in usbvision_parse_data() */ | |
| frame->scanlength = 0; | |
| /* set v4l2_format index */ | |
| frame->v4l2_format = usbvision->palette; | |
| spin_lock_irqsave(&usbvision->queue_lock, lock_flags); | |
| list_add_tail(&frame->frame, &usbvision->inqueue); | |
| spin_unlock_irqrestore(&usbvision->queue_lock, | |
| lock_flags); | |
| } | |
| } | |
| /* Then try to steal a frame (like a VIDIOC_DQBUF would do) */ | |
| if (list_empty(&(usbvision->outqueue))) { | |
| if (noblock) | |
| return -EAGAIN; | |
| ret = wait_event_interruptible | |
| (usbvision->wait_frame, | |
| !list_empty(&(usbvision->outqueue))); | |
| if (ret) | |
| return ret; | |
| } | |
| spin_lock_irqsave(&usbvision->queue_lock, lock_flags); | |
| frame = list_entry(usbvision->outqueue.next, | |
| struct usbvision_frame, frame); | |
| list_del(usbvision->outqueue.next); | |
| spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags); | |
| /* An error returns an empty frame */ | |
| if (frame->grabstate == frame_state_error) { | |
| frame->bytes_read = 0; | |
| return 0; | |
| } | |
| PDEBUG(DBG_IO, "%s: frmx=%d, bytes_read=%ld, scanlength=%ld", | |
| __func__, | |
| frame->index, frame->bytes_read, frame->scanlength); | |
| /* copy bytes to user space; we allow for partials reads */ | |
| if ((count + frame->bytes_read) > (unsigned long)frame->scanlength) | |
| count = frame->scanlength - frame->bytes_read; | |
| if (copy_to_user(buf, frame->data + frame->bytes_read, count)) | |
| return -EFAULT; | |
| frame->bytes_read += count; | |
| PDEBUG(DBG_IO, "%s: {copy} count used=%ld, new bytes_read=%ld", | |
| __func__, | |
| (unsigned long)count, frame->bytes_read); | |
| #if 1 | |
| /* | |
| * FIXME: | |
| * For now, forget the frame if it has not been read in one shot. | |
| */ | |
| frame->bytes_read = 0; | |
| /* Mark it as available to be used again. */ | |
| frame->grabstate = frame_state_unused; | |
| #else | |
| if (frame->bytes_read >= frame->scanlength) { | |
| /* All data has been read */ | |
| frame->bytes_read = 0; | |
| /* Mark it as available to be used again. */ | |
| frame->grabstate = frame_state_unused; | |
| } | |
| #endif | |
| return count; | |
| } | |
| static ssize_t usbvision_v4l2_read(struct file *file, char __user *buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct usb_usbvision *usbvision = video_drvdata(file); | |
| int res; | |
| if (mutex_lock_interruptible(&usbvision->v4l2_lock)) | |
| return -ERESTARTSYS; | |
| res = usbvision_read(file, buf, count, ppos); | |
| mutex_unlock(&usbvision->v4l2_lock); | |
| return res; | |
| } | |
| static int usbvision_mmap(struct file *file, struct vm_area_struct *vma) | |
| { | |
| unsigned long size = vma->vm_end - vma->vm_start, | |
| start = vma->vm_start; | |
| void *pos; | |
| u32 i; | |
| struct usb_usbvision *usbvision = video_drvdata(file); | |
| PDEBUG(DBG_MMAP, "mmap"); | |
| if (!USBVISION_IS_OPERATIONAL(usbvision)) | |
| return -EFAULT; | |
| if (!(vma->vm_flags & VM_WRITE) || | |
| size != PAGE_ALIGN(usbvision->max_frame_size)) { | |
| return -EINVAL; | |
| } | |
| for (i = 0; i < usbvision->num_frames; i++) { | |
| if (((PAGE_ALIGN(usbvision->max_frame_size)*i) >> PAGE_SHIFT) == | |
| vma->vm_pgoff) | |
| break; | |
| } | |
| if (i == usbvision->num_frames) { | |
| PDEBUG(DBG_MMAP, | |
| "mmap: user supplied mapping address is out of range"); | |
| return -EINVAL; | |
| } | |
| /* VM_IO is eventually going to replace PageReserved altogether */ | |
| vma->vm_flags |= VM_IO | VM_DONTEXPAND | VM_DONTDUMP; | |
| pos = usbvision->frame[i].data; | |
| while (size > 0) { | |
| if (vm_insert_page(vma, start, vmalloc_to_page(pos))) { | |
| PDEBUG(DBG_MMAP, "mmap: vm_insert_page failed"); | |
| return -EAGAIN; | |
| } | |
| start += PAGE_SIZE; | |
| pos += PAGE_SIZE; | |
| size -= PAGE_SIZE; | |
| } | |
| return 0; | |
| } | |
| static int usbvision_v4l2_mmap(struct file *file, struct vm_area_struct *vma) | |
| { | |
| struct usb_usbvision *usbvision = video_drvdata(file); | |
| int res; | |
| if (mutex_lock_interruptible(&usbvision->v4l2_lock)) | |
| return -ERESTARTSYS; | |
| res = usbvision_mmap(file, vma); | |
| mutex_unlock(&usbvision->v4l2_lock); | |
| return res; | |
| } | |
| /* | |
| * Here comes the stuff for radio on usbvision based devices | |
| * | |
| */ | |
| static int usbvision_radio_open(struct file *file) | |
| { | |
| struct usb_usbvision *usbvision = video_drvdata(file); | |
| int err_code = 0; | |
| PDEBUG(DBG_IO, "%s:", __func__); | |
| if (mutex_lock_interruptible(&usbvision->v4l2_lock)) | |
| return -ERESTARTSYS; | |
| err_code = v4l2_fh_open(file); | |
| if (err_code) | |
| goto out; | |
| if (usbvision->user) { | |
| dev_err(&usbvision->rdev.dev, | |
| "%s: Someone tried to open an already opened USBVision Radio!\n", | |
| __func__); | |
| err_code = -EBUSY; | |
| } else { | |
| /* Alternate interface 1 is is the biggest frame size */ | |
| err_code = usbvision_set_alternate(usbvision); | |
| if (err_code < 0) { | |
| usbvision->last_error = err_code; | |
| err_code = -EBUSY; | |
| goto out; | |
| } | |
| /* If so far no errors then we shall start the radio */ | |
| usbvision->radio = 1; | |
| call_all(usbvision, tuner, s_radio); | |
| usbvision_set_audio(usbvision, USBVISION_AUDIO_RADIO); | |
| usbvision->user++; | |
| } | |
| out: | |
| mutex_unlock(&usbvision->v4l2_lock); | |
| return err_code; | |
| } | |
| static int usbvision_radio_close(struct file *file) | |
| { | |
| struct usb_usbvision *usbvision = video_drvdata(file); | |
| PDEBUG(DBG_IO, ""); | |
| mutex_lock(&usbvision->v4l2_lock); | |
| /* Set packet size to 0 */ | |
| usbvision->iface_alt = 0; | |
| usb_set_interface(usbvision->dev, usbvision->iface, | |
| usbvision->iface_alt); | |
| usbvision_audio_off(usbvision); | |
| usbvision->radio = 0; | |
| usbvision->user--; | |
| mutex_unlock(&usbvision->v4l2_lock); | |
| if (usbvision->remove_pending) { | |
| printk(KERN_INFO "%s: Final disconnect\n", __func__); | |
| v4l2_fh_release(file); | |
| usbvision_release(usbvision); | |
| return 0; | |
| } | |
| PDEBUG(DBG_IO, "success"); | |
| return v4l2_fh_release(file); | |
| } | |
| /* Video registration stuff */ | |
| /* Video template */ | |
| static const struct v4l2_file_operations usbvision_fops = { | |
| .owner = THIS_MODULE, | |
| .open = usbvision_v4l2_open, | |
| .release = usbvision_v4l2_close, | |
| .read = usbvision_v4l2_read, | |
| .mmap = usbvision_v4l2_mmap, | |
| .unlocked_ioctl = video_ioctl2, | |
| }; | |
| static const struct v4l2_ioctl_ops usbvision_ioctl_ops = { | |
| .vidioc_querycap = vidioc_querycap, | |
| .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, | |
| .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, | |
| .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, | |
| .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, | |
| .vidioc_reqbufs = vidioc_reqbufs, | |
| .vidioc_querybuf = vidioc_querybuf, | |
| .vidioc_qbuf = vidioc_qbuf, | |
| .vidioc_dqbuf = vidioc_dqbuf, | |
| .vidioc_s_std = vidioc_s_std, | |
| .vidioc_g_std = vidioc_g_std, | |
| .vidioc_enum_input = vidioc_enum_input, | |
| .vidioc_g_input = vidioc_g_input, | |
| .vidioc_s_input = vidioc_s_input, | |
| .vidioc_streamon = vidioc_streamon, | |
| .vidioc_streamoff = vidioc_streamoff, | |
| .vidioc_g_tuner = vidioc_g_tuner, | |
| .vidioc_s_tuner = vidioc_s_tuner, | |
| .vidioc_g_frequency = vidioc_g_frequency, | |
| .vidioc_s_frequency = vidioc_s_frequency, | |
| .vidioc_log_status = v4l2_ctrl_log_status, | |
| .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, | |
| .vidioc_unsubscribe_event = v4l2_event_unsubscribe, | |
| #ifdef CONFIG_VIDEO_ADV_DEBUG | |
| .vidioc_g_register = vidioc_g_register, | |
| .vidioc_s_register = vidioc_s_register, | |
| #endif | |
| }; | |
| static struct video_device usbvision_video_template = { | |
| .fops = &usbvision_fops, | |
| .ioctl_ops = &usbvision_ioctl_ops, | |
| .name = "usbvision-video", | |
| .release = video_device_release_empty, | |
| .tvnorms = USBVISION_NORMS, | |
| }; | |
| /* Radio template */ | |
| static const struct v4l2_file_operations usbvision_radio_fops = { | |
| .owner = THIS_MODULE, | |
| .open = usbvision_radio_open, | |
| .release = usbvision_radio_close, | |
| .poll = v4l2_ctrl_poll, | |
| .unlocked_ioctl = video_ioctl2, | |
| }; | |
| static const struct v4l2_ioctl_ops usbvision_radio_ioctl_ops = { | |
| .vidioc_querycap = vidioc_querycap, | |
| .vidioc_g_tuner = vidioc_g_tuner, | |
| .vidioc_s_tuner = vidioc_s_tuner, | |
| .vidioc_g_frequency = vidioc_g_frequency, | |
| .vidioc_s_frequency = vidioc_s_frequency, | |
| .vidioc_log_status = v4l2_ctrl_log_status, | |
| .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, | |
| .vidioc_unsubscribe_event = v4l2_event_unsubscribe, | |
| }; | |
| static struct video_device usbvision_radio_template = { | |
| .fops = &usbvision_radio_fops, | |
| .name = "usbvision-radio", | |
| .release = video_device_release_empty, | |
| .ioctl_ops = &usbvision_radio_ioctl_ops, | |
| }; | |
| static void usbvision_vdev_init(struct usb_usbvision *usbvision, | |
| struct video_device *vdev, | |
| const struct video_device *vdev_template, | |
| const char *name) | |
| { | |
| struct usb_device *usb_dev = usbvision->dev; | |
| if (usb_dev == NULL) { | |
| dev_err(&usbvision->dev->dev, | |
| "%s: usbvision->dev is not set\n", __func__); | |
| return; | |
| } | |
| *vdev = *vdev_template; | |
| vdev->lock = &usbvision->v4l2_lock; | |
| vdev->v4l2_dev = &usbvision->v4l2_dev; | |
| snprintf(vdev->name, sizeof(vdev->name), "%s", name); | |
| video_set_drvdata(vdev, usbvision); | |
| } | |
| /* unregister video4linux devices */ | |
| static void usbvision_unregister_video(struct usb_usbvision *usbvision) | |
| { | |
| /* Radio Device: */ | |
| if (video_is_registered(&usbvision->rdev)) { | |
| PDEBUG(DBG_PROBE, "unregister %s [v4l2]", | |
| video_device_node_name(&usbvision->rdev)); | |
| video_unregister_device(&usbvision->rdev); | |
| } | |
| /* Video Device: */ | |
| if (video_is_registered(&usbvision->vdev)) { | |
| PDEBUG(DBG_PROBE, "unregister %s [v4l2]", | |
| video_device_node_name(&usbvision->vdev)); | |
| video_unregister_device(&usbvision->vdev); | |
| } | |
| } | |
| /* register video4linux devices */ | |
| static int usbvision_register_video(struct usb_usbvision *usbvision) | |
| { | |
| int res = -ENOMEM; | |
| /* Video Device: */ | |
| usbvision_vdev_init(usbvision, &usbvision->vdev, | |
| &usbvision_video_template, "USBVision Video"); | |
| if (!usbvision->have_tuner) { | |
| v4l2_disable_ioctl(&usbvision->vdev, VIDIOC_G_FREQUENCY); | |
| v4l2_disable_ioctl(&usbvision->vdev, VIDIOC_S_TUNER); | |
| v4l2_disable_ioctl(&usbvision->vdev, VIDIOC_G_FREQUENCY); | |
| v4l2_disable_ioctl(&usbvision->vdev, VIDIOC_S_TUNER); | |
| } | |
| if (video_register_device(&usbvision->vdev, VFL_TYPE_GRABBER, video_nr) < 0) | |
| goto err_exit; | |
| printk(KERN_INFO "USBVision[%d]: registered USBVision Video device %s [v4l2]\n", | |
| usbvision->nr, video_device_node_name(&usbvision->vdev)); | |
| /* Radio Device: */ | |
| if (usbvision_device_data[usbvision->dev_model].radio) { | |
| /* usbvision has radio */ | |
| usbvision_vdev_init(usbvision, &usbvision->rdev, | |
| &usbvision_radio_template, "USBVision Radio"); | |
| if (video_register_device(&usbvision->rdev, VFL_TYPE_RADIO, radio_nr) < 0) | |
| goto err_exit; | |
| printk(KERN_INFO "USBVision[%d]: registered USBVision Radio device %s [v4l2]\n", | |
| usbvision->nr, video_device_node_name(&usbvision->rdev)); | |
| } | |
| /* all done */ | |
| return 0; | |
| err_exit: | |
| dev_err(&usbvision->dev->dev, | |
| "USBVision[%d]: video_register_device() failed\n", | |
| usbvision->nr); | |
| usbvision_unregister_video(usbvision); | |
| return res; | |
| } | |
| /* | |
| * usbvision_alloc() | |
| * | |
| * This code allocates the struct usb_usbvision. | |
| * It is filled with default values. | |
| * | |
| * Returns NULL on error, a pointer to usb_usbvision else. | |
| * | |
| */ | |
| static struct usb_usbvision *usbvision_alloc(struct usb_device *dev, | |
| struct usb_interface *intf) | |
| { | |
| struct usb_usbvision *usbvision; | |
| usbvision = kzalloc(sizeof(struct usb_usbvision), GFP_KERNEL); | |
| if (usbvision == NULL) | |
| return NULL; | |
| usbvision->dev = dev; | |
| if (v4l2_device_register(&intf->dev, &usbvision->v4l2_dev)) | |
| goto err_free; | |
| if (v4l2_ctrl_handler_init(&usbvision->hdl, 4)) | |
| goto err_unreg; | |
| usbvision->v4l2_dev.ctrl_handler = &usbvision->hdl; | |
| mutex_init(&usbvision->v4l2_lock); | |
| /* prepare control urb for control messages during interrupts */ | |
| usbvision->ctrl_urb = usb_alloc_urb(USBVISION_URB_FRAMES, GFP_KERNEL); | |
| if (usbvision->ctrl_urb == NULL) | |
| goto err_unreg; | |
| init_waitqueue_head(&usbvision->ctrl_urb_wq); | |
| return usbvision; | |
| err_unreg: | |
| v4l2_ctrl_handler_free(&usbvision->hdl); | |
| v4l2_device_unregister(&usbvision->v4l2_dev); | |
| err_free: | |
| kfree(usbvision); | |
| return NULL; | |
| } | |
| /* | |
| * usbvision_release() | |
| * | |
| * This code does final release of struct usb_usbvision. This happens | |
| * after the device is disconnected -and- all clients closed their files. | |
| * | |
| */ | |
| static void usbvision_release(struct usb_usbvision *usbvision) | |
| { | |
| PDEBUG(DBG_PROBE, ""); | |
| usbvision->initialized = 0; | |
| usbvision_remove_sysfs(&usbvision->vdev); | |
| usbvision_unregister_video(usbvision); | |
| kfree(usbvision->alt_max_pkt_size); | |
| usb_free_urb(usbvision->ctrl_urb); | |
| v4l2_ctrl_handler_free(&usbvision->hdl); | |
| v4l2_device_unregister(&usbvision->v4l2_dev); | |
| kfree(usbvision); | |
| PDEBUG(DBG_PROBE, "success"); | |
| } | |
| /*********************** usb interface **********************************/ | |
| static void usbvision_configure_video(struct usb_usbvision *usbvision) | |
| { | |
| int model; | |
| if (usbvision == NULL) | |
| return; | |
| model = usbvision->dev_model; | |
| usbvision->palette = usbvision_v4l2_format[2]; /* V4L2_PIX_FMT_RGB24; */ | |
| if (usbvision_device_data[usbvision->dev_model].vin_reg2_override) { | |
| usbvision->vin_reg2_preset = | |
| usbvision_device_data[usbvision->dev_model].vin_reg2; | |
| } else { | |
| usbvision->vin_reg2_preset = 0; | |
| } | |
| usbvision->tvnorm_id = usbvision_device_data[model].video_norm; | |
| usbvision->video_inputs = usbvision_device_data[model].video_channels; | |
| usbvision->ctl_input = 0; | |
| usbvision->radio_freq = 87.5 * 16000; | |
| usbvision->tv_freq = 400 * 16; | |
| /* This should be here to make i2c clients to be able to register */ | |
| /* first switch off audio */ | |
| if (usbvision_device_data[model].audio_channels > 0) | |
| usbvision_audio_off(usbvision); | |
| /* and then power up the tuner */ | |
| usbvision_power_on(usbvision); | |
| usbvision_i2c_register(usbvision); | |
| } | |
| /* | |
| * usbvision_probe() | |
| * | |
| * This procedure queries device descriptor and accepts the interface | |
| * if it looks like USBVISION video device | |
| * | |
| */ | |
| static int usbvision_probe(struct usb_interface *intf, | |
| const struct usb_device_id *devid) | |
| { | |
| struct usb_device *dev = usb_get_dev(interface_to_usbdev(intf)); | |
| struct usb_interface *uif; | |
| __u8 ifnum = intf->altsetting->desc.bInterfaceNumber; | |
| const struct usb_host_interface *interface; | |
| struct usb_usbvision *usbvision = NULL; | |
| const struct usb_endpoint_descriptor *endpoint; | |
| int model, i, ret; | |
| PDEBUG(DBG_PROBE, "VID=%#04x, PID=%#04x, ifnum=%u", | |
| dev->descriptor.idVendor, | |
| dev->descriptor.idProduct, ifnum); | |
| model = devid->driver_info; | |
| if (model < 0 || model >= usbvision_device_data_size) { | |
| PDEBUG(DBG_PROBE, "model out of bounds %d", model); | |
| ret = -ENODEV; | |
| goto err_usb; | |
| } | |
| printk(KERN_INFO "%s: %s found\n", __func__, | |
| usbvision_device_data[model].model_string); | |
| if (usbvision_device_data[model].interface >= 0) | |
| interface = &dev->actconfig->interface[usbvision_device_data[model].interface]->altsetting[0]; | |
| else if (ifnum < dev->actconfig->desc.bNumInterfaces) | |
| interface = &dev->actconfig->interface[ifnum]->altsetting[0]; | |
| else { | |
| dev_err(&intf->dev, "interface %d is invalid, max is %d\n", | |
| ifnum, dev->actconfig->desc.bNumInterfaces - 1); | |
| ret = -ENODEV; | |
| goto err_usb; | |
| } | |
| if (interface->desc.bNumEndpoints < 2) { | |
| dev_err(&intf->dev, "interface %d has %d endpoints, but must" | |
| " have minimum 2\n", ifnum, interface->desc.bNumEndpoints); | |
| ret = -ENODEV; | |
| goto err_usb; | |
| } | |
| endpoint = &interface->endpoint[1].desc; | |
| if (!usb_endpoint_xfer_isoc(endpoint)) { | |
| dev_err(&intf->dev, "%s: interface %d. has non-ISO endpoint!\n", | |
| __func__, ifnum); | |
| dev_err(&intf->dev, "%s: Endpoint attributes %d", | |
| __func__, endpoint->bmAttributes); | |
| ret = -ENODEV; | |
| goto err_usb; | |
| } | |
| if (usb_endpoint_dir_out(endpoint)) { | |
| dev_err(&intf->dev, "%s: interface %d. has ISO OUT endpoint!\n", | |
| __func__, ifnum); | |
| ret = -ENODEV; | |
| goto err_usb; | |
| } | |
| usbvision = usbvision_alloc(dev, intf); | |
| if (usbvision == NULL) { | |
| dev_err(&intf->dev, "%s: couldn't allocate USBVision struct\n", __func__); | |
| ret = -ENOMEM; | |
| goto err_usb; | |
| } | |
| if (dev->descriptor.bNumConfigurations > 1) | |
| usbvision->bridge_type = BRIDGE_NT1004; | |
| else if (model == DAZZLE_DVC_90_REV_1_SECAM) | |
| usbvision->bridge_type = BRIDGE_NT1005; | |
| else | |
| usbvision->bridge_type = BRIDGE_NT1003; | |
| PDEBUG(DBG_PROBE, "bridge_type %d", usbvision->bridge_type); | |
| /* compute alternate max packet sizes */ | |
| uif = dev->actconfig->interface[0]; | |
| usbvision->num_alt = uif->num_altsetting; | |
| PDEBUG(DBG_PROBE, "Alternate settings: %i", usbvision->num_alt); | |
| usbvision->alt_max_pkt_size = kmalloc(32 * usbvision->num_alt, GFP_KERNEL); | |
| if (usbvision->alt_max_pkt_size == NULL) { | |
| dev_err(&intf->dev, "usbvision: out of memory!\n"); | |
| ret = -ENOMEM; | |
| goto err_pkt; | |
| } | |
| for (i = 0; i < usbvision->num_alt; i++) { | |
| u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[1].desc. | |
| wMaxPacketSize); | |
| usbvision->alt_max_pkt_size[i] = | |
| (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1); | |
| PDEBUG(DBG_PROBE, "Alternate setting %i, max size= %i", i, | |
| usbvision->alt_max_pkt_size[i]); | |
| } | |
| usbvision->nr = usbvision_nr++; | |
| spin_lock_init(&usbvision->queue_lock); | |
| init_waitqueue_head(&usbvision->wait_frame); | |
| init_waitqueue_head(&usbvision->wait_stream); | |
| usbvision->have_tuner = usbvision_device_data[model].tuner; | |
| if (usbvision->have_tuner) | |
| usbvision->tuner_type = usbvision_device_data[model].tuner_type; | |
| usbvision->dev_model = model; | |
| usbvision->remove_pending = 0; | |
| usbvision->iface = ifnum; | |
| usbvision->iface_alt = 0; | |
| usbvision->video_endp = endpoint->bEndpointAddress; | |
| usbvision->isoc_packet_size = 0; | |
| usbvision->usb_bandwidth = 0; | |
| usbvision->user = 0; | |
| usbvision->streaming = stream_off; | |
| usbvision_configure_video(usbvision); | |
| usbvision_register_video(usbvision); | |
| usbvision_create_sysfs(&usbvision->vdev); | |
| PDEBUG(DBG_PROBE, "success"); | |
| return 0; | |
| err_pkt: | |
| usbvision_release(usbvision); | |
| err_usb: | |
| usb_put_dev(dev); | |
| return ret; | |
| } | |
| /* | |
| * usbvision_disconnect() | |
| * | |
| * This procedure stops all driver activity, deallocates interface-private | |
| * structure (pointed by 'ptr') and after that driver should be removable | |
| * with no ill consequences. | |
| * | |
| */ | |
| static void usbvision_disconnect(struct usb_interface *intf) | |
| { | |
| struct usb_usbvision *usbvision = to_usbvision(usb_get_intfdata(intf)); | |
| PDEBUG(DBG_PROBE, ""); | |
| if (usbvision == NULL) { | |
| pr_err("%s: usb_get_intfdata() failed\n", __func__); | |
| return; | |
| } | |
| mutex_lock(&usbvision->v4l2_lock); | |
| /* At this time we ask to cancel outstanding URBs */ | |
| usbvision_stop_isoc(usbvision); | |
| v4l2_device_disconnect(&usbvision->v4l2_dev); | |
| usbvision_i2c_unregister(usbvision); | |
| usbvision->remove_pending = 1; /* Now all ISO data will be ignored */ | |
| usb_put_dev(usbvision->dev); | |
| usbvision->dev = NULL; /* USB device is no more */ | |
| mutex_unlock(&usbvision->v4l2_lock); | |
| if (usbvision->user) { | |
| printk(KERN_INFO "%s: In use, disconnect pending\n", | |
| __func__); | |
| wake_up_interruptible(&usbvision->wait_frame); | |
| wake_up_interruptible(&usbvision->wait_stream); | |
| } else { | |
| usbvision_release(usbvision); | |
| } | |
| PDEBUG(DBG_PROBE, "success"); | |
| } | |
| static struct usb_driver usbvision_driver = { | |
| .name = "usbvision", | |
| .id_table = usbvision_table, | |
| .probe = usbvision_probe, | |
| .disconnect = usbvision_disconnect, | |
| }; | |
| /* | |
| * usbvision_init() | |
| * | |
| * This code is run to initialize the driver. | |
| * | |
| */ | |
| static int __init usbvision_init(void) | |
| { | |
| int err_code; | |
| PDEBUG(DBG_PROBE, ""); | |
| PDEBUG(DBG_IO, "IO debugging is enabled [video]"); | |
| PDEBUG(DBG_PROBE, "PROBE debugging is enabled [video]"); | |
| PDEBUG(DBG_MMAP, "MMAP debugging is enabled [video]"); | |
| /* disable planar mode support unless compression enabled */ | |
| if (isoc_mode != ISOC_MODE_COMPRESS) { | |
| /* FIXME : not the right way to set supported flag */ | |
| usbvision_v4l2_format[6].supported = 0; /* V4L2_PIX_FMT_YVU420 */ | |
| usbvision_v4l2_format[7].supported = 0; /* V4L2_PIX_FMT_YUV422P */ | |
| } | |
| err_code = usb_register(&usbvision_driver); | |
| if (err_code == 0) { | |
| printk(KERN_INFO DRIVER_DESC " : " USBVISION_VERSION_STRING "\n"); | |
| PDEBUG(DBG_PROBE, "success"); | |
| } | |
| return err_code; | |
| } | |
| static void __exit usbvision_exit(void) | |
| { | |
| PDEBUG(DBG_PROBE, ""); | |
| usb_deregister(&usbvision_driver); | |
| PDEBUG(DBG_PROBE, "success"); | |
| } | |
| module_init(usbvision_init); | |
| module_exit(usbvision_exit); |