| /* | |
| * Intel MIC Platform Software Stack (MPSS) | |
| * | |
| * Copyright(c) 2014 Intel Corporation. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License, version 2, as | |
| * published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * Intel SCIF driver. | |
| * | |
| */ | |
| #include <linux/scif.h> | |
| #include "scif_main.h" | |
| #include "scif_map.h" | |
| static const char * const scif_ep_states[] = { | |
| "Unbound", | |
| "Bound", | |
| "Listening", | |
| "Connected", | |
| "Connecting", | |
| "Mapping", | |
| "Closing", | |
| "Close Listening", | |
| "Disconnected", | |
| "Zombie"}; | |
| enum conn_async_state { | |
| ASYNC_CONN_IDLE = 1, /* ep setup for async connect */ | |
| ASYNC_CONN_INPROGRESS, /* async connect in progress */ | |
| ASYNC_CONN_FLUSH_WORK /* async work flush in progress */ | |
| }; | |
| /* | |
| * File operations for anonymous inode file associated with a SCIF endpoint, | |
| * used in kernel mode SCIF poll. Kernel mode SCIF poll calls portions of the | |
| * poll API in the kernel and these take in a struct file *. Since a struct | |
| * file is not available to kernel mode SCIF, it uses an anonymous file for | |
| * this purpose. | |
| */ | |
| const struct file_operations scif_anon_fops = { | |
| .owner = THIS_MODULE, | |
| }; | |
| scif_epd_t scif_open(void) | |
| { | |
| struct scif_endpt *ep; | |
| int err; | |
| might_sleep(); | |
| ep = kzalloc(sizeof(*ep), GFP_KERNEL); | |
| if (!ep) | |
| goto err_ep_alloc; | |
| ep->qp_info.qp = kzalloc(sizeof(*ep->qp_info.qp), GFP_KERNEL); | |
| if (!ep->qp_info.qp) | |
| goto err_qp_alloc; | |
| err = scif_anon_inode_getfile(ep); | |
| if (err) | |
| goto err_anon_inode; | |
| spin_lock_init(&ep->lock); | |
| mutex_init(&ep->sendlock); | |
| mutex_init(&ep->recvlock); | |
| scif_rma_ep_init(ep); | |
| ep->state = SCIFEP_UNBOUND; | |
| dev_dbg(scif_info.mdev.this_device, | |
| "SCIFAPI open: ep %p success\n", ep); | |
| return ep; | |
| err_anon_inode: | |
| kfree(ep->qp_info.qp); | |
| err_qp_alloc: | |
| kfree(ep); | |
| err_ep_alloc: | |
| return NULL; | |
| } | |
| EXPORT_SYMBOL_GPL(scif_open); | |
| /* | |
| * scif_disconnect_ep - Disconnects the endpoint if found | |
| * @epd: The end point returned from scif_open() | |
| */ | |
| static struct scif_endpt *scif_disconnect_ep(struct scif_endpt *ep) | |
| { | |
| struct scifmsg msg; | |
| struct scif_endpt *fep = NULL; | |
| struct scif_endpt *tmpep; | |
| struct list_head *pos, *tmpq; | |
| int err; | |
| /* | |
| * Wake up any threads blocked in send()/recv() before closing | |
| * out the connection. Grabbing and releasing the send/recv lock | |
| * will ensure that any blocked senders/receivers have exited for | |
| * Ring 0 endpoints. It is a Ring 0 bug to call send/recv after | |
| * close. Ring 3 endpoints are not affected since close will not | |
| * be called while there are IOCTLs executing. | |
| */ | |
| wake_up_interruptible(&ep->sendwq); | |
| wake_up_interruptible(&ep->recvwq); | |
| mutex_lock(&ep->sendlock); | |
| mutex_unlock(&ep->sendlock); | |
| mutex_lock(&ep->recvlock); | |
| mutex_unlock(&ep->recvlock); | |
| /* Remove from the connected list */ | |
| mutex_lock(&scif_info.connlock); | |
| list_for_each_safe(pos, tmpq, &scif_info.connected) { | |
| tmpep = list_entry(pos, struct scif_endpt, list); | |
| if (tmpep == ep) { | |
| list_del(pos); | |
| fep = tmpep; | |
| spin_lock(&ep->lock); | |
| break; | |
| } | |
| } | |
| if (!fep) { | |
| /* | |
| * The other side has completed the disconnect before | |
| * the end point can be removed from the list. Therefore | |
| * the ep lock is not locked, traverse the disconnected | |
| * list to find the endpoint and release the conn lock. | |
| */ | |
| list_for_each_safe(pos, tmpq, &scif_info.disconnected) { | |
| tmpep = list_entry(pos, struct scif_endpt, list); | |
| if (tmpep == ep) { | |
| list_del(pos); | |
| break; | |
| } | |
| } | |
| mutex_unlock(&scif_info.connlock); | |
| return NULL; | |
| } | |
| init_completion(&ep->discon); | |
| msg.uop = SCIF_DISCNCT; | |
| msg.src = ep->port; | |
| msg.dst = ep->peer; | |
| msg.payload[0] = (u64)ep; | |
| msg.payload[1] = ep->remote_ep; | |
| err = scif_nodeqp_send(ep->remote_dev, &msg); | |
| spin_unlock(&ep->lock); | |
| mutex_unlock(&scif_info.connlock); | |
| if (!err) | |
| /* Wait for the remote node to respond with SCIF_DISCNT_ACK */ | |
| wait_for_completion_timeout(&ep->discon, | |
| SCIF_NODE_ALIVE_TIMEOUT); | |
| return ep; | |
| } | |
| int scif_close(scif_epd_t epd) | |
| { | |
| struct scif_endpt *ep = (struct scif_endpt *)epd; | |
| struct scif_endpt *tmpep; | |
| struct list_head *pos, *tmpq; | |
| enum scif_epd_state oldstate; | |
| bool flush_conn; | |
| dev_dbg(scif_info.mdev.this_device, "SCIFAPI close: ep %p %s\n", | |
| ep, scif_ep_states[ep->state]); | |
| might_sleep(); | |
| spin_lock(&ep->lock); | |
| flush_conn = (ep->conn_async_state == ASYNC_CONN_INPROGRESS); | |
| spin_unlock(&ep->lock); | |
| if (flush_conn) | |
| flush_work(&scif_info.conn_work); | |
| spin_lock(&ep->lock); | |
| oldstate = ep->state; | |
| ep->state = SCIFEP_CLOSING; | |
| switch (oldstate) { | |
| case SCIFEP_ZOMBIE: | |
| dev_err(scif_info.mdev.this_device, | |
| "SCIFAPI close: zombie state unexpected\n"); | |
| case SCIFEP_DISCONNECTED: | |
| spin_unlock(&ep->lock); | |
| scif_unregister_all_windows(epd); | |
| /* Remove from the disconnected list */ | |
| mutex_lock(&scif_info.connlock); | |
| list_for_each_safe(pos, tmpq, &scif_info.disconnected) { | |
| tmpep = list_entry(pos, struct scif_endpt, list); | |
| if (tmpep == ep) { | |
| list_del(pos); | |
| break; | |
| } | |
| } | |
| mutex_unlock(&scif_info.connlock); | |
| break; | |
| case SCIFEP_UNBOUND: | |
| case SCIFEP_BOUND: | |
| case SCIFEP_CONNECTING: | |
| spin_unlock(&ep->lock); | |
| break; | |
| case SCIFEP_MAPPING: | |
| case SCIFEP_CONNECTED: | |
| case SCIFEP_CLOSING: | |
| { | |
| spin_unlock(&ep->lock); | |
| scif_unregister_all_windows(epd); | |
| scif_disconnect_ep(ep); | |
| break; | |
| } | |
| case SCIFEP_LISTENING: | |
| case SCIFEP_CLLISTEN: | |
| { | |
| struct scif_conreq *conreq; | |
| struct scifmsg msg; | |
| struct scif_endpt *aep; | |
| spin_unlock(&ep->lock); | |
| mutex_lock(&scif_info.eplock); | |
| /* remove from listen list */ | |
| list_for_each_safe(pos, tmpq, &scif_info.listen) { | |
| tmpep = list_entry(pos, struct scif_endpt, list); | |
| if (tmpep == ep) | |
| list_del(pos); | |
| } | |
| /* Remove any dangling accepts */ | |
| while (ep->acceptcnt) { | |
| aep = list_first_entry(&ep->li_accept, | |
| struct scif_endpt, liacceptlist); | |
| list_del(&aep->liacceptlist); | |
| scif_put_port(aep->port.port); | |
| list_for_each_safe(pos, tmpq, &scif_info.uaccept) { | |
| tmpep = list_entry(pos, struct scif_endpt, | |
| miacceptlist); | |
| if (tmpep == aep) { | |
| list_del(pos); | |
| break; | |
| } | |
| } | |
| mutex_unlock(&scif_info.eplock); | |
| mutex_lock(&scif_info.connlock); | |
| list_for_each_safe(pos, tmpq, &scif_info.connected) { | |
| tmpep = list_entry(pos, | |
| struct scif_endpt, list); | |
| if (tmpep == aep) { | |
| list_del(pos); | |
| break; | |
| } | |
| } | |
| list_for_each_safe(pos, tmpq, &scif_info.disconnected) { | |
| tmpep = list_entry(pos, | |
| struct scif_endpt, list); | |
| if (tmpep == aep) { | |
| list_del(pos); | |
| break; | |
| } | |
| } | |
| mutex_unlock(&scif_info.connlock); | |
| scif_teardown_ep(aep); | |
| mutex_lock(&scif_info.eplock); | |
| scif_add_epd_to_zombie_list(aep, SCIF_EPLOCK_HELD); | |
| ep->acceptcnt--; | |
| } | |
| spin_lock(&ep->lock); | |
| mutex_unlock(&scif_info.eplock); | |
| /* Remove and reject any pending connection requests. */ | |
| while (ep->conreqcnt) { | |
| conreq = list_first_entry(&ep->conlist, | |
| struct scif_conreq, list); | |
| list_del(&conreq->list); | |
| msg.uop = SCIF_CNCT_REJ; | |
| msg.dst.node = conreq->msg.src.node; | |
| msg.dst.port = conreq->msg.src.port; | |
| msg.payload[0] = conreq->msg.payload[0]; | |
| msg.payload[1] = conreq->msg.payload[1]; | |
| /* | |
| * No Error Handling on purpose for scif_nodeqp_send(). | |
| * If the remote node is lost we still want free the | |
| * connection requests on the self node. | |
| */ | |
| scif_nodeqp_send(&scif_dev[conreq->msg.src.node], | |
| &msg); | |
| ep->conreqcnt--; | |
| kfree(conreq); | |
| } | |
| spin_unlock(&ep->lock); | |
| /* If a kSCIF accept is waiting wake it up */ | |
| wake_up_interruptible(&ep->conwq); | |
| break; | |
| } | |
| } | |
| scif_put_port(ep->port.port); | |
| scif_anon_inode_fput(ep); | |
| scif_teardown_ep(ep); | |
| scif_add_epd_to_zombie_list(ep, !SCIF_EPLOCK_HELD); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(scif_close); | |
| /** | |
| * scif_flush() - Wakes up any blocking accepts. The endpoint will no longer | |
| * accept new connections. | |
| * @epd: The end point returned from scif_open() | |
| */ | |
| int __scif_flush(scif_epd_t epd) | |
| { | |
| struct scif_endpt *ep = (struct scif_endpt *)epd; | |
| switch (ep->state) { | |
| case SCIFEP_LISTENING: | |
| { | |
| ep->state = SCIFEP_CLLISTEN; | |
| /* If an accept is waiting wake it up */ | |
| wake_up_interruptible(&ep->conwq); | |
| break; | |
| } | |
| default: | |
| break; | |
| } | |
| return 0; | |
| } | |
| int scif_bind(scif_epd_t epd, u16 pn) | |
| { | |
| struct scif_endpt *ep = (struct scif_endpt *)epd; | |
| int ret = 0; | |
| int tmp; | |
| dev_dbg(scif_info.mdev.this_device, | |
| "SCIFAPI bind: ep %p %s requested port number %d\n", | |
| ep, scif_ep_states[ep->state], pn); | |
| if (pn) { | |
| /* | |
| * Similar to IETF RFC 1700, SCIF ports below | |
| * SCIF_ADMIN_PORT_END can only be bound by system (or root) | |
| * processes or by processes executed by privileged users. | |
| */ | |
| if (pn < SCIF_ADMIN_PORT_END && !capable(CAP_SYS_ADMIN)) { | |
| ret = -EACCES; | |
| goto scif_bind_admin_exit; | |
| } | |
| } | |
| spin_lock(&ep->lock); | |
| if (ep->state == SCIFEP_BOUND) { | |
| ret = -EINVAL; | |
| goto scif_bind_exit; | |
| } else if (ep->state != SCIFEP_UNBOUND) { | |
| ret = -EISCONN; | |
| goto scif_bind_exit; | |
| } | |
| if (pn) { | |
| tmp = scif_rsrv_port(pn); | |
| if (tmp != pn) { | |
| ret = -EINVAL; | |
| goto scif_bind_exit; | |
| } | |
| } else { | |
| pn = scif_get_new_port(); | |
| if (!pn) { | |
| ret = -ENOSPC; | |
| goto scif_bind_exit; | |
| } | |
| } | |
| ep->state = SCIFEP_BOUND; | |
| ep->port.node = scif_info.nodeid; | |
| ep->port.port = pn; | |
| ep->conn_async_state = ASYNC_CONN_IDLE; | |
| ret = pn; | |
| dev_dbg(scif_info.mdev.this_device, | |
| "SCIFAPI bind: bound to port number %d\n", pn); | |
| scif_bind_exit: | |
| spin_unlock(&ep->lock); | |
| scif_bind_admin_exit: | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(scif_bind); | |
| int scif_listen(scif_epd_t epd, int backlog) | |
| { | |
| struct scif_endpt *ep = (struct scif_endpt *)epd; | |
| dev_dbg(scif_info.mdev.this_device, | |
| "SCIFAPI listen: ep %p %s\n", ep, scif_ep_states[ep->state]); | |
| spin_lock(&ep->lock); | |
| switch (ep->state) { | |
| case SCIFEP_ZOMBIE: | |
| case SCIFEP_CLOSING: | |
| case SCIFEP_CLLISTEN: | |
| case SCIFEP_UNBOUND: | |
| case SCIFEP_DISCONNECTED: | |
| spin_unlock(&ep->lock); | |
| return -EINVAL; | |
| case SCIFEP_LISTENING: | |
| case SCIFEP_CONNECTED: | |
| case SCIFEP_CONNECTING: | |
| case SCIFEP_MAPPING: | |
| spin_unlock(&ep->lock); | |
| return -EISCONN; | |
| case SCIFEP_BOUND: | |
| break; | |
| } | |
| ep->state = SCIFEP_LISTENING; | |
| ep->backlog = backlog; | |
| ep->conreqcnt = 0; | |
| ep->acceptcnt = 0; | |
| INIT_LIST_HEAD(&ep->conlist); | |
| init_waitqueue_head(&ep->conwq); | |
| INIT_LIST_HEAD(&ep->li_accept); | |
| spin_unlock(&ep->lock); | |
| /* | |
| * Listen status is complete so delete the qp information not needed | |
| * on a listen before placing on the list of listening ep's | |
| */ | |
| scif_teardown_ep(ep); | |
| ep->qp_info.qp = NULL; | |
| mutex_lock(&scif_info.eplock); | |
| list_add_tail(&ep->list, &scif_info.listen); | |
| mutex_unlock(&scif_info.eplock); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(scif_listen); | |
| /* | |
| ************************************************************************ | |
| * SCIF connection flow: | |
| * | |
| * 1) A SCIF listening endpoint can call scif_accept(..) to wait for SCIF | |
| * connections via a SCIF_CNCT_REQ message | |
| * 2) A SCIF endpoint can initiate a SCIF connection by calling | |
| * scif_connect(..) which calls scif_setup_qp_connect(..) which | |
| * allocates the local qp for the endpoint ring buffer and then sends | |
| * a SCIF_CNCT_REQ to the remote node and waits for a SCIF_CNCT_GNT or | |
| * a SCIF_CNCT_REJ message | |
| * 3) The peer node handles a SCIF_CNCT_REQ via scif_cnctreq_resp(..) which | |
| * wakes up any threads blocked in step 1 or sends a SCIF_CNCT_REJ | |
| * message otherwise | |
| * 4) A thread blocked waiting for incoming connections allocates its local | |
| * endpoint QP and ring buffer following which it sends a SCIF_CNCT_GNT | |
| * and waits for a SCIF_CNCT_GNT(N)ACK. If the allocation fails then | |
| * the node sends a SCIF_CNCT_REJ message | |
| * 5) Upon receipt of a SCIF_CNCT_GNT or a SCIF_CNCT_REJ message the | |
| * connecting endpoint is woken up as part of handling | |
| * scif_cnctgnt_resp(..) following which it maps the remote endpoints' | |
| * QP, updates its outbound QP and sends a SCIF_CNCT_GNTACK message on | |
| * success or a SCIF_CNCT_GNTNACK message on failure and completes | |
| * the scif_connect(..) API | |
| * 6) Upon receipt of a SCIF_CNCT_GNT(N)ACK the accepting endpoint blocked | |
| * in step 4 is woken up and completes the scif_accept(..) API | |
| * 7) The SCIF connection is now established between the two SCIF endpoints. | |
| */ | |
| static int scif_conn_func(struct scif_endpt *ep) | |
| { | |
| int err = 0; | |
| struct scifmsg msg; | |
| struct device *spdev; | |
| err = scif_reserve_dma_chan(ep); | |
| if (err) { | |
| dev_err(&ep->remote_dev->sdev->dev, | |
| "%s %d err %d\n", __func__, __LINE__, err); | |
| ep->state = SCIFEP_BOUND; | |
| goto connect_error_simple; | |
| } | |
| /* Initiate the first part of the endpoint QP setup */ | |
| err = scif_setup_qp_connect(ep->qp_info.qp, &ep->qp_info.qp_offset, | |
| SCIF_ENDPT_QP_SIZE, ep->remote_dev); | |
| if (err) { | |
| dev_err(&ep->remote_dev->sdev->dev, | |
| "%s err %d qp_offset 0x%llx\n", | |
| __func__, err, ep->qp_info.qp_offset); | |
| ep->state = SCIFEP_BOUND; | |
| goto connect_error_simple; | |
| } | |
| spdev = scif_get_peer_dev(ep->remote_dev); | |
| if (IS_ERR(spdev)) { | |
| err = PTR_ERR(spdev); | |
| goto cleanup_qp; | |
| } | |
| /* Format connect message and send it */ | |
| msg.src = ep->port; | |
| msg.dst = ep->conn_port; | |
| msg.uop = SCIF_CNCT_REQ; | |
| msg.payload[0] = (u64)ep; | |
| msg.payload[1] = ep->qp_info.qp_offset; | |
| err = _scif_nodeqp_send(ep->remote_dev, &msg); | |
| if (err) | |
| goto connect_error_dec; | |
| scif_put_peer_dev(spdev); | |
| /* | |
| * Wait for the remote node to respond with SCIF_CNCT_GNT or | |
| * SCIF_CNCT_REJ message. | |
| */ | |
| err = wait_event_timeout(ep->conwq, ep->state != SCIFEP_CONNECTING, | |
| SCIF_NODE_ALIVE_TIMEOUT); | |
| if (!err) { | |
| dev_err(&ep->remote_dev->sdev->dev, | |
| "%s %d timeout\n", __func__, __LINE__); | |
| ep->state = SCIFEP_BOUND; | |
| } | |
| spdev = scif_get_peer_dev(ep->remote_dev); | |
| if (IS_ERR(spdev)) { | |
| err = PTR_ERR(spdev); | |
| goto cleanup_qp; | |
| } | |
| if (ep->state == SCIFEP_MAPPING) { | |
| err = scif_setup_qp_connect_response(ep->remote_dev, | |
| ep->qp_info.qp, | |
| ep->qp_info.gnt_pld); | |
| /* | |
| * If the resource to map the queue are not available then | |
| * we need to tell the other side to terminate the accept | |
| */ | |
| if (err) { | |
| dev_err(&ep->remote_dev->sdev->dev, | |
| "%s %d err %d\n", __func__, __LINE__, err); | |
| msg.uop = SCIF_CNCT_GNTNACK; | |
| msg.payload[0] = ep->remote_ep; | |
| _scif_nodeqp_send(ep->remote_dev, &msg); | |
| ep->state = SCIFEP_BOUND; | |
| goto connect_error_dec; | |
| } | |
| msg.uop = SCIF_CNCT_GNTACK; | |
| msg.payload[0] = ep->remote_ep; | |
| err = _scif_nodeqp_send(ep->remote_dev, &msg); | |
| if (err) { | |
| ep->state = SCIFEP_BOUND; | |
| goto connect_error_dec; | |
| } | |
| ep->state = SCIFEP_CONNECTED; | |
| mutex_lock(&scif_info.connlock); | |
| list_add_tail(&ep->list, &scif_info.connected); | |
| mutex_unlock(&scif_info.connlock); | |
| dev_dbg(&ep->remote_dev->sdev->dev, | |
| "SCIFAPI connect: ep %p connected\n", ep); | |
| } else if (ep->state == SCIFEP_BOUND) { | |
| dev_dbg(&ep->remote_dev->sdev->dev, | |
| "SCIFAPI connect: ep %p connection refused\n", ep); | |
| err = -ECONNREFUSED; | |
| goto connect_error_dec; | |
| } | |
| scif_put_peer_dev(spdev); | |
| return err; | |
| connect_error_dec: | |
| scif_put_peer_dev(spdev); | |
| cleanup_qp: | |
| scif_cleanup_ep_qp(ep); | |
| connect_error_simple: | |
| return err; | |
| } | |
| /* | |
| * scif_conn_handler: | |
| * | |
| * Workqueue handler for servicing non-blocking SCIF connect | |
| * | |
| */ | |
| void scif_conn_handler(struct work_struct *work) | |
| { | |
| struct scif_endpt *ep; | |
| do { | |
| ep = NULL; | |
| spin_lock(&scif_info.nb_connect_lock); | |
| if (!list_empty(&scif_info.nb_connect_list)) { | |
| ep = list_first_entry(&scif_info.nb_connect_list, | |
| struct scif_endpt, conn_list); | |
| list_del(&ep->conn_list); | |
| } | |
| spin_unlock(&scif_info.nb_connect_lock); | |
| if (ep) { | |
| ep->conn_err = scif_conn_func(ep); | |
| wake_up_interruptible(&ep->conn_pend_wq); | |
| } | |
| } while (ep); | |
| } | |
| int __scif_connect(scif_epd_t epd, struct scif_port_id *dst, bool non_block) | |
| { | |
| struct scif_endpt *ep = (struct scif_endpt *)epd; | |
| int err = 0; | |
| struct scif_dev *remote_dev; | |
| struct device *spdev; | |
| dev_dbg(scif_info.mdev.this_device, "SCIFAPI connect: ep %p %s\n", ep, | |
| scif_ep_states[ep->state]); | |
| if (!scif_dev || dst->node > scif_info.maxid) | |
| return -ENODEV; | |
| might_sleep(); | |
| remote_dev = &scif_dev[dst->node]; | |
| spdev = scif_get_peer_dev(remote_dev); | |
| if (IS_ERR(spdev)) { | |
| err = PTR_ERR(spdev); | |
| return err; | |
| } | |
| spin_lock(&ep->lock); | |
| switch (ep->state) { | |
| case SCIFEP_ZOMBIE: | |
| case SCIFEP_CLOSING: | |
| err = -EINVAL; | |
| break; | |
| case SCIFEP_DISCONNECTED: | |
| if (ep->conn_async_state == ASYNC_CONN_INPROGRESS) | |
| ep->conn_async_state = ASYNC_CONN_FLUSH_WORK; | |
| else | |
| err = -EINVAL; | |
| break; | |
| case SCIFEP_LISTENING: | |
| case SCIFEP_CLLISTEN: | |
| err = -EOPNOTSUPP; | |
| break; | |
| case SCIFEP_CONNECTING: | |
| case SCIFEP_MAPPING: | |
| if (ep->conn_async_state == ASYNC_CONN_INPROGRESS) | |
| err = -EINPROGRESS; | |
| else | |
| err = -EISCONN; | |
| break; | |
| case SCIFEP_CONNECTED: | |
| if (ep->conn_async_state == ASYNC_CONN_INPROGRESS) | |
| ep->conn_async_state = ASYNC_CONN_FLUSH_WORK; | |
| else | |
| err = -EISCONN; | |
| break; | |
| case SCIFEP_UNBOUND: | |
| ep->port.port = scif_get_new_port(); | |
| if (!ep->port.port) { | |
| err = -ENOSPC; | |
| } else { | |
| ep->port.node = scif_info.nodeid; | |
| ep->conn_async_state = ASYNC_CONN_IDLE; | |
| } | |
| /* Fall through */ | |
| case SCIFEP_BOUND: | |
| /* | |
| * If a non-blocking connect has been already initiated | |
| * (conn_async_state is either ASYNC_CONN_INPROGRESS or | |
| * ASYNC_CONN_FLUSH_WORK), the end point could end up in | |
| * SCIF_BOUND due an error in the connection process | |
| * (e.g., connection refused) If conn_async_state is | |
| * ASYNC_CONN_INPROGRESS - transition to ASYNC_CONN_FLUSH_WORK | |
| * so that the error status can be collected. If the state is | |
| * already ASYNC_CONN_FLUSH_WORK - then set the error to | |
| * EINPROGRESS since some other thread is waiting to collect | |
| * error status. | |
| */ | |
| if (ep->conn_async_state == ASYNC_CONN_INPROGRESS) { | |
| ep->conn_async_state = ASYNC_CONN_FLUSH_WORK; | |
| } else if (ep->conn_async_state == ASYNC_CONN_FLUSH_WORK) { | |
| err = -EINPROGRESS; | |
| } else { | |
| ep->conn_port = *dst; | |
| init_waitqueue_head(&ep->sendwq); | |
| init_waitqueue_head(&ep->recvwq); | |
| init_waitqueue_head(&ep->conwq); | |
| ep->conn_async_state = 0; | |
| if (unlikely(non_block)) | |
| ep->conn_async_state = ASYNC_CONN_INPROGRESS; | |
| } | |
| break; | |
| } | |
| if (err || ep->conn_async_state == ASYNC_CONN_FLUSH_WORK) | |
| goto connect_simple_unlock1; | |
| ep->state = SCIFEP_CONNECTING; | |
| ep->remote_dev = &scif_dev[dst->node]; | |
| ep->qp_info.qp->magic = SCIFEP_MAGIC; | |
| if (ep->conn_async_state == ASYNC_CONN_INPROGRESS) { | |
| init_waitqueue_head(&ep->conn_pend_wq); | |
| spin_lock(&scif_info.nb_connect_lock); | |
| list_add_tail(&ep->conn_list, &scif_info.nb_connect_list); | |
| spin_unlock(&scif_info.nb_connect_lock); | |
| err = -EINPROGRESS; | |
| schedule_work(&scif_info.conn_work); | |
| } | |
| connect_simple_unlock1: | |
| spin_unlock(&ep->lock); | |
| scif_put_peer_dev(spdev); | |
| if (err) { | |
| return err; | |
| } else if (ep->conn_async_state == ASYNC_CONN_FLUSH_WORK) { | |
| flush_work(&scif_info.conn_work); | |
| err = ep->conn_err; | |
| spin_lock(&ep->lock); | |
| ep->conn_async_state = ASYNC_CONN_IDLE; | |
| spin_unlock(&ep->lock); | |
| } else { | |
| err = scif_conn_func(ep); | |
| } | |
| return err; | |
| } | |
| int scif_connect(scif_epd_t epd, struct scif_port_id *dst) | |
| { | |
| return __scif_connect(epd, dst, false); | |
| } | |
| EXPORT_SYMBOL_GPL(scif_connect); | |
| /** | |
| * scif_accept() - Accept a connection request from the remote node | |
| * | |
| * The function accepts a connection request from the remote node. Successful | |
| * complete is indicate by a new end point being created and passed back | |
| * to the caller for future reference. | |
| * | |
| * Upon successful complete a zero will be returned and the peer information | |
| * will be filled in. | |
| * | |
| * If the end point is not in the listening state -EINVAL will be returned. | |
| * | |
| * If during the connection sequence resource allocation fails the -ENOMEM | |
| * will be returned. | |
| * | |
| * If the function is called with the ASYNC flag set and no connection requests | |
| * are pending it will return -EAGAIN. | |
| * | |
| * If the remote side is not sending any connection requests the caller may | |
| * terminate this function with a signal. If so a -EINTR will be returned. | |
| */ | |
| int scif_accept(scif_epd_t epd, struct scif_port_id *peer, | |
| scif_epd_t *newepd, int flags) | |
| { | |
| struct scif_endpt *lep = (struct scif_endpt *)epd; | |
| struct scif_endpt *cep; | |
| struct scif_conreq *conreq; | |
| struct scifmsg msg; | |
| int err; | |
| struct device *spdev; | |
| dev_dbg(scif_info.mdev.this_device, | |
| "SCIFAPI accept: ep %p %s\n", lep, scif_ep_states[lep->state]); | |
| if (flags & ~SCIF_ACCEPT_SYNC) | |
| return -EINVAL; | |
| if (!peer || !newepd) | |
| return -EINVAL; | |
| might_sleep(); | |
| spin_lock(&lep->lock); | |
| if (lep->state != SCIFEP_LISTENING) { | |
| spin_unlock(&lep->lock); | |
| return -EINVAL; | |
| } | |
| if (!lep->conreqcnt && !(flags & SCIF_ACCEPT_SYNC)) { | |
| /* No connection request present and we do not want to wait */ | |
| spin_unlock(&lep->lock); | |
| return -EAGAIN; | |
| } | |
| lep->files = current->files; | |
| retry_connection: | |
| spin_unlock(&lep->lock); | |
| /* Wait for the remote node to send us a SCIF_CNCT_REQ */ | |
| err = wait_event_interruptible(lep->conwq, | |
| (lep->conreqcnt || | |
| (lep->state != SCIFEP_LISTENING))); | |
| if (err) | |
| return err; | |
| if (lep->state != SCIFEP_LISTENING) | |
| return -EINTR; | |
| spin_lock(&lep->lock); | |
| if (!lep->conreqcnt) | |
| goto retry_connection; | |
| /* Get the first connect request off the list */ | |
| conreq = list_first_entry(&lep->conlist, struct scif_conreq, list); | |
| list_del(&conreq->list); | |
| lep->conreqcnt--; | |
| spin_unlock(&lep->lock); | |
| /* Fill in the peer information */ | |
| peer->node = conreq->msg.src.node; | |
| peer->port = conreq->msg.src.port; | |
| cep = kzalloc(sizeof(*cep), GFP_KERNEL); | |
| if (!cep) { | |
| err = -ENOMEM; | |
| goto scif_accept_error_epalloc; | |
| } | |
| spin_lock_init(&cep->lock); | |
| mutex_init(&cep->sendlock); | |
| mutex_init(&cep->recvlock); | |
| cep->state = SCIFEP_CONNECTING; | |
| cep->remote_dev = &scif_dev[peer->node]; | |
| cep->remote_ep = conreq->msg.payload[0]; | |
| scif_rma_ep_init(cep); | |
| err = scif_reserve_dma_chan(cep); | |
| if (err) { | |
| dev_err(scif_info.mdev.this_device, | |
| "%s %d err %d\n", __func__, __LINE__, err); | |
| goto scif_accept_error_qpalloc; | |
| } | |
| cep->qp_info.qp = kzalloc(sizeof(*cep->qp_info.qp), GFP_KERNEL); | |
| if (!cep->qp_info.qp) { | |
| err = -ENOMEM; | |
| goto scif_accept_error_qpalloc; | |
| } | |
| err = scif_anon_inode_getfile(cep); | |
| if (err) | |
| goto scif_accept_error_anon_inode; | |
| cep->qp_info.qp->magic = SCIFEP_MAGIC; | |
| spdev = scif_get_peer_dev(cep->remote_dev); | |
| if (IS_ERR(spdev)) { | |
| err = PTR_ERR(spdev); | |
| goto scif_accept_error_map; | |
| } | |
| err = scif_setup_qp_accept(cep->qp_info.qp, &cep->qp_info.qp_offset, | |
| conreq->msg.payload[1], SCIF_ENDPT_QP_SIZE, | |
| cep->remote_dev); | |
| if (err) { | |
| dev_dbg(&cep->remote_dev->sdev->dev, | |
| "SCIFAPI accept: ep %p new %p scif_setup_qp_accept %d qp_offset 0x%llx\n", | |
| lep, cep, err, cep->qp_info.qp_offset); | |
| scif_put_peer_dev(spdev); | |
| goto scif_accept_error_map; | |
| } | |
| cep->port.node = lep->port.node; | |
| cep->port.port = lep->port.port; | |
| cep->peer.node = peer->node; | |
| cep->peer.port = peer->port; | |
| init_waitqueue_head(&cep->sendwq); | |
| init_waitqueue_head(&cep->recvwq); | |
| init_waitqueue_head(&cep->conwq); | |
| msg.uop = SCIF_CNCT_GNT; | |
| msg.src = cep->port; | |
| msg.payload[0] = cep->remote_ep; | |
| msg.payload[1] = cep->qp_info.qp_offset; | |
| msg.payload[2] = (u64)cep; | |
| err = _scif_nodeqp_send(cep->remote_dev, &msg); | |
| scif_put_peer_dev(spdev); | |
| if (err) | |
| goto scif_accept_error_map; | |
| retry: | |
| /* Wait for the remote node to respond with SCIF_CNCT_GNT(N)ACK */ | |
| err = wait_event_timeout(cep->conwq, cep->state != SCIFEP_CONNECTING, | |
| SCIF_NODE_ACCEPT_TIMEOUT); | |
| if (!err && scifdev_alive(cep)) | |
| goto retry; | |
| err = !err ? -ENODEV : 0; | |
| if (err) | |
| goto scif_accept_error_map; | |
| kfree(conreq); | |
| spin_lock(&cep->lock); | |
| if (cep->state == SCIFEP_CLOSING) { | |
| /* | |
| * Remote failed to allocate resources and NAKed the grant. | |
| * There is at this point nothing referencing the new end point. | |
| */ | |
| spin_unlock(&cep->lock); | |
| scif_teardown_ep(cep); | |
| kfree(cep); | |
| /* If call with sync flag then go back and wait. */ | |
| if (flags & SCIF_ACCEPT_SYNC) { | |
| spin_lock(&lep->lock); | |
| goto retry_connection; | |
| } | |
| return -EAGAIN; | |
| } | |
| scif_get_port(cep->port.port); | |
| *newepd = (scif_epd_t)cep; | |
| spin_unlock(&cep->lock); | |
| return 0; | |
| scif_accept_error_map: | |
| scif_anon_inode_fput(cep); | |
| scif_accept_error_anon_inode: | |
| scif_teardown_ep(cep); | |
| scif_accept_error_qpalloc: | |
| kfree(cep); | |
| scif_accept_error_epalloc: | |
| msg.uop = SCIF_CNCT_REJ; | |
| msg.dst.node = conreq->msg.src.node; | |
| msg.dst.port = conreq->msg.src.port; | |
| msg.payload[0] = conreq->msg.payload[0]; | |
| msg.payload[1] = conreq->msg.payload[1]; | |
| scif_nodeqp_send(&scif_dev[conreq->msg.src.node], &msg); | |
| kfree(conreq); | |
| return err; | |
| } | |
| EXPORT_SYMBOL_GPL(scif_accept); | |
| /* | |
| * scif_msg_param_check: | |
| * @epd: The end point returned from scif_open() | |
| * @len: Length to receive | |
| * @flags: blocking or non blocking | |
| * | |
| * Validate parameters for messaging APIs scif_send(..)/scif_recv(..). | |
| */ | |
| static inline int scif_msg_param_check(scif_epd_t epd, int len, int flags) | |
| { | |
| int ret = -EINVAL; | |
| if (len < 0) | |
| goto err_ret; | |
| if (flags && (!(flags & SCIF_RECV_BLOCK))) | |
| goto err_ret; | |
| ret = 0; | |
| err_ret: | |
| return ret; | |
| } | |
| static int _scif_send(scif_epd_t epd, void *msg, int len, int flags) | |
| { | |
| struct scif_endpt *ep = (struct scif_endpt *)epd; | |
| struct scifmsg notif_msg; | |
| int curr_xfer_len = 0, sent_len = 0, write_count; | |
| int ret = 0; | |
| struct scif_qp *qp = ep->qp_info.qp; | |
| if (flags & SCIF_SEND_BLOCK) | |
| might_sleep(); | |
| spin_lock(&ep->lock); | |
| while (sent_len != len && SCIFEP_CONNECTED == ep->state) { | |
| write_count = scif_rb_space(&qp->outbound_q); | |
| if (write_count) { | |
| /* Best effort to send as much data as possible */ | |
| curr_xfer_len = min(len - sent_len, write_count); | |
| ret = scif_rb_write(&qp->outbound_q, msg, | |
| curr_xfer_len); | |
| if (ret < 0) | |
| break; | |
| /* Success. Update write pointer */ | |
| scif_rb_commit(&qp->outbound_q); | |
| /* | |
| * Send a notification to the peer about the | |
| * produced data message. | |
| */ | |
| notif_msg.src = ep->port; | |
| notif_msg.uop = SCIF_CLIENT_SENT; | |
| notif_msg.payload[0] = ep->remote_ep; | |
| ret = _scif_nodeqp_send(ep->remote_dev, ¬if_msg); | |
| if (ret) | |
| break; | |
| sent_len += curr_xfer_len; | |
| msg = msg + curr_xfer_len; | |
| continue; | |
| } | |
| curr_xfer_len = min(len - sent_len, SCIF_ENDPT_QP_SIZE - 1); | |
| /* Not enough RB space. return for the Non Blocking case */ | |
| if (!(flags & SCIF_SEND_BLOCK)) | |
| break; | |
| spin_unlock(&ep->lock); | |
| /* Wait for a SCIF_CLIENT_RCVD message in the Blocking case */ | |
| ret = | |
| wait_event_interruptible(ep->sendwq, | |
| (SCIFEP_CONNECTED != ep->state) || | |
| (scif_rb_space(&qp->outbound_q) >= | |
| curr_xfer_len)); | |
| spin_lock(&ep->lock); | |
| if (ret) | |
| break; | |
| } | |
| if (sent_len) | |
| ret = sent_len; | |
| else if (!ret && SCIFEP_CONNECTED != ep->state) | |
| ret = SCIFEP_DISCONNECTED == ep->state ? | |
| -ECONNRESET : -ENOTCONN; | |
| spin_unlock(&ep->lock); | |
| return ret; | |
| } | |
| static int _scif_recv(scif_epd_t epd, void *msg, int len, int flags) | |
| { | |
| int read_size; | |
| struct scif_endpt *ep = (struct scif_endpt *)epd; | |
| struct scifmsg notif_msg; | |
| int curr_recv_len = 0, remaining_len = len, read_count; | |
| int ret = 0; | |
| struct scif_qp *qp = ep->qp_info.qp; | |
| if (flags & SCIF_RECV_BLOCK) | |
| might_sleep(); | |
| spin_lock(&ep->lock); | |
| while (remaining_len && (SCIFEP_CONNECTED == ep->state || | |
| SCIFEP_DISCONNECTED == ep->state)) { | |
| read_count = scif_rb_count(&qp->inbound_q, remaining_len); | |
| if (read_count) { | |
| /* | |
| * Best effort to recv as much data as there | |
| * are bytes to read in the RB particularly | |
| * important for the Non Blocking case. | |
| */ | |
| curr_recv_len = min(remaining_len, read_count); | |
| read_size = scif_rb_get_next(&qp->inbound_q, | |
| msg, curr_recv_len); | |
| if (ep->state == SCIFEP_CONNECTED) { | |
| /* | |
| * Update the read pointer only if the endpoint | |
| * is still connected else the read pointer | |
| * might no longer exist since the peer has | |
| * freed resources! | |
| */ | |
| scif_rb_update_read_ptr(&qp->inbound_q); | |
| /* | |
| * Send a notification to the peer about the | |
| * consumed data message only if the EP is in | |
| * SCIFEP_CONNECTED state. | |
| */ | |
| notif_msg.src = ep->port; | |
| notif_msg.uop = SCIF_CLIENT_RCVD; | |
| notif_msg.payload[0] = ep->remote_ep; | |
| ret = _scif_nodeqp_send(ep->remote_dev, | |
| ¬if_msg); | |
| if (ret) | |
| break; | |
| } | |
| remaining_len -= curr_recv_len; | |
| msg = msg + curr_recv_len; | |
| continue; | |
| } | |
| /* | |
| * Bail out now if the EP is in SCIFEP_DISCONNECTED state else | |
| * we will keep looping forever. | |
| */ | |
| if (ep->state == SCIFEP_DISCONNECTED) | |
| break; | |
| /* | |
| * Return in the Non Blocking case if there is no data | |
| * to read in this iteration. | |
| */ | |
| if (!(flags & SCIF_RECV_BLOCK)) | |
| break; | |
| curr_recv_len = min(remaining_len, SCIF_ENDPT_QP_SIZE - 1); | |
| spin_unlock(&ep->lock); | |
| /* | |
| * Wait for a SCIF_CLIENT_SEND message in the blocking case | |
| * or until other side disconnects. | |
| */ | |
| ret = | |
| wait_event_interruptible(ep->recvwq, | |
| SCIFEP_CONNECTED != ep->state || | |
| scif_rb_count(&qp->inbound_q, | |
| curr_recv_len) | |
| >= curr_recv_len); | |
| spin_lock(&ep->lock); | |
| if (ret) | |
| break; | |
| } | |
| if (len - remaining_len) | |
| ret = len - remaining_len; | |
| else if (!ret && ep->state != SCIFEP_CONNECTED) | |
| ret = ep->state == SCIFEP_DISCONNECTED ? | |
| -ECONNRESET : -ENOTCONN; | |
| spin_unlock(&ep->lock); | |
| return ret; | |
| } | |
| /** | |
| * scif_user_send() - Send data to connection queue | |
| * @epd: The end point returned from scif_open() | |
| * @msg: Address to place data | |
| * @len: Length to receive | |
| * @flags: blocking or non blocking | |
| * | |
| * This function is called from the driver IOCTL entry point | |
| * only and is a wrapper for _scif_send(). | |
| */ | |
| int scif_user_send(scif_epd_t epd, void __user *msg, int len, int flags) | |
| { | |
| struct scif_endpt *ep = (struct scif_endpt *)epd; | |
| int err = 0; | |
| int sent_len = 0; | |
| char *tmp; | |
| int loop_len; | |
| int chunk_len = min(len, (1 << (MAX_ORDER + PAGE_SHIFT - 1))); | |
| dev_dbg(scif_info.mdev.this_device, | |
| "SCIFAPI send (U): ep %p %s\n", ep, scif_ep_states[ep->state]); | |
| if (!len) | |
| return 0; | |
| err = scif_msg_param_check(epd, len, flags); | |
| if (err) | |
| goto send_err; | |
| tmp = kmalloc(chunk_len, GFP_KERNEL); | |
| if (!tmp) { | |
| err = -ENOMEM; | |
| goto send_err; | |
| } | |
| /* | |
| * Grabbing the lock before breaking up the transfer in | |
| * multiple chunks is required to ensure that messages do | |
| * not get fragmented and reordered. | |
| */ | |
| mutex_lock(&ep->sendlock); | |
| while (sent_len != len) { | |
| loop_len = len - sent_len; | |
| loop_len = min(chunk_len, loop_len); | |
| if (copy_from_user(tmp, msg, loop_len)) { | |
| err = -EFAULT; | |
| goto send_free_err; | |
| } | |
| err = _scif_send(epd, tmp, loop_len, flags); | |
| if (err < 0) | |
| goto send_free_err; | |
| sent_len += err; | |
| msg += err; | |
| if (err != loop_len) | |
| goto send_free_err; | |
| } | |
| send_free_err: | |
| mutex_unlock(&ep->sendlock); | |
| kfree(tmp); | |
| send_err: | |
| return err < 0 ? err : sent_len; | |
| } | |
| /** | |
| * scif_user_recv() - Receive data from connection queue | |
| * @epd: The end point returned from scif_open() | |
| * @msg: Address to place data | |
| * @len: Length to receive | |
| * @flags: blocking or non blocking | |
| * | |
| * This function is called from the driver IOCTL entry point | |
| * only and is a wrapper for _scif_recv(). | |
| */ | |
| int scif_user_recv(scif_epd_t epd, void __user *msg, int len, int flags) | |
| { | |
| struct scif_endpt *ep = (struct scif_endpt *)epd; | |
| int err = 0; | |
| int recv_len = 0; | |
| char *tmp; | |
| int loop_len; | |
| int chunk_len = min(len, (1 << (MAX_ORDER + PAGE_SHIFT - 1))); | |
| dev_dbg(scif_info.mdev.this_device, | |
| "SCIFAPI recv (U): ep %p %s\n", ep, scif_ep_states[ep->state]); | |
| if (!len) | |
| return 0; | |
| err = scif_msg_param_check(epd, len, flags); | |
| if (err) | |
| goto recv_err; | |
| tmp = kmalloc(chunk_len, GFP_KERNEL); | |
| if (!tmp) { | |
| err = -ENOMEM; | |
| goto recv_err; | |
| } | |
| /* | |
| * Grabbing the lock before breaking up the transfer in | |
| * multiple chunks is required to ensure that messages do | |
| * not get fragmented and reordered. | |
| */ | |
| mutex_lock(&ep->recvlock); | |
| while (recv_len != len) { | |
| loop_len = len - recv_len; | |
| loop_len = min(chunk_len, loop_len); | |
| err = _scif_recv(epd, tmp, loop_len, flags); | |
| if (err < 0) | |
| goto recv_free_err; | |
| if (copy_to_user(msg, tmp, err)) { | |
| err = -EFAULT; | |
| goto recv_free_err; | |
| } | |
| recv_len += err; | |
| msg += err; | |
| if (err != loop_len) | |
| goto recv_free_err; | |
| } | |
| recv_free_err: | |
| mutex_unlock(&ep->recvlock); | |
| kfree(tmp); | |
| recv_err: | |
| return err < 0 ? err : recv_len; | |
| } | |
| /** | |
| * scif_send() - Send data to connection queue | |
| * @epd: The end point returned from scif_open() | |
| * @msg: Address to place data | |
| * @len: Length to receive | |
| * @flags: blocking or non blocking | |
| * | |
| * This function is called from the kernel mode only and is | |
| * a wrapper for _scif_send(). | |
| */ | |
| int scif_send(scif_epd_t epd, void *msg, int len, int flags) | |
| { | |
| struct scif_endpt *ep = (struct scif_endpt *)epd; | |
| int ret; | |
| dev_dbg(scif_info.mdev.this_device, | |
| "SCIFAPI send (K): ep %p %s\n", ep, scif_ep_states[ep->state]); | |
| if (!len) | |
| return 0; | |
| ret = scif_msg_param_check(epd, len, flags); | |
| if (ret) | |
| return ret; | |
| if (!ep->remote_dev) | |
| return -ENOTCONN; | |
| /* | |
| * Grab the mutex lock in the blocking case only | |
| * to ensure messages do not get fragmented/reordered. | |
| * The non blocking mode is protected using spin locks | |
| * in _scif_send(). | |
| */ | |
| if (flags & SCIF_SEND_BLOCK) | |
| mutex_lock(&ep->sendlock); | |
| ret = _scif_send(epd, msg, len, flags); | |
| if (flags & SCIF_SEND_BLOCK) | |
| mutex_unlock(&ep->sendlock); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(scif_send); | |
| /** | |
| * scif_recv() - Receive data from connection queue | |
| * @epd: The end point returned from scif_open() | |
| * @msg: Address to place data | |
| * @len: Length to receive | |
| * @flags: blocking or non blocking | |
| * | |
| * This function is called from the kernel mode only and is | |
| * a wrapper for _scif_recv(). | |
| */ | |
| int scif_recv(scif_epd_t epd, void *msg, int len, int flags) | |
| { | |
| struct scif_endpt *ep = (struct scif_endpt *)epd; | |
| int ret; | |
| dev_dbg(scif_info.mdev.this_device, | |
| "SCIFAPI recv (K): ep %p %s\n", ep, scif_ep_states[ep->state]); | |
| if (!len) | |
| return 0; | |
| ret = scif_msg_param_check(epd, len, flags); | |
| if (ret) | |
| return ret; | |
| /* | |
| * Grab the mutex lock in the blocking case only | |
| * to ensure messages do not get fragmented/reordered. | |
| * The non blocking mode is protected using spin locks | |
| * in _scif_send(). | |
| */ | |
| if (flags & SCIF_RECV_BLOCK) | |
| mutex_lock(&ep->recvlock); | |
| ret = _scif_recv(epd, msg, len, flags); | |
| if (flags & SCIF_RECV_BLOCK) | |
| mutex_unlock(&ep->recvlock); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(scif_recv); | |
| static inline void _scif_poll_wait(struct file *f, wait_queue_head_t *wq, | |
| poll_table *p, struct scif_endpt *ep) | |
| { | |
| /* | |
| * Because poll_wait makes a GFP_KERNEL allocation, give up the lock | |
| * and regrab it afterwards. Because the endpoint state might have | |
| * changed while the lock was given up, the state must be checked | |
| * again after re-acquiring the lock. The code in __scif_pollfd(..) | |
| * does this. | |
| */ | |
| spin_unlock(&ep->lock); | |
| poll_wait(f, wq, p); | |
| spin_lock(&ep->lock); | |
| } | |
| unsigned int | |
| __scif_pollfd(struct file *f, poll_table *wait, struct scif_endpt *ep) | |
| { | |
| unsigned int mask = 0; | |
| dev_dbg(scif_info.mdev.this_device, | |
| "SCIFAPI pollfd: ep %p %s\n", ep, scif_ep_states[ep->state]); | |
| spin_lock(&ep->lock); | |
| /* Endpoint is waiting for a non-blocking connect to complete */ | |
| if (ep->conn_async_state == ASYNC_CONN_INPROGRESS) { | |
| _scif_poll_wait(f, &ep->conn_pend_wq, wait, ep); | |
| if (ep->conn_async_state == ASYNC_CONN_INPROGRESS) { | |
| if (ep->state == SCIFEP_CONNECTED || | |
| ep->state == SCIFEP_DISCONNECTED || | |
| ep->conn_err) | |
| mask |= POLLOUT; | |
| goto exit; | |
| } | |
| } | |
| /* Endpoint is listening for incoming connection requests */ | |
| if (ep->state == SCIFEP_LISTENING) { | |
| _scif_poll_wait(f, &ep->conwq, wait, ep); | |
| if (ep->state == SCIFEP_LISTENING) { | |
| if (ep->conreqcnt) | |
| mask |= POLLIN; | |
| goto exit; | |
| } | |
| } | |
| /* Endpoint is connected or disconnected */ | |
| if (ep->state == SCIFEP_CONNECTED || ep->state == SCIFEP_DISCONNECTED) { | |
| if (poll_requested_events(wait) & POLLIN) | |
| _scif_poll_wait(f, &ep->recvwq, wait, ep); | |
| if (poll_requested_events(wait) & POLLOUT) | |
| _scif_poll_wait(f, &ep->sendwq, wait, ep); | |
| if (ep->state == SCIFEP_CONNECTED || | |
| ep->state == SCIFEP_DISCONNECTED) { | |
| /* Data can be read without blocking */ | |
| if (scif_rb_count(&ep->qp_info.qp->inbound_q, 1)) | |
| mask |= POLLIN; | |
| /* Data can be written without blocking */ | |
| if (scif_rb_space(&ep->qp_info.qp->outbound_q)) | |
| mask |= POLLOUT; | |
| /* Return POLLHUP if endpoint is disconnected */ | |
| if (ep->state == SCIFEP_DISCONNECTED) | |
| mask |= POLLHUP; | |
| goto exit; | |
| } | |
| } | |
| /* Return POLLERR if the endpoint is in none of the above states */ | |
| mask |= POLLERR; | |
| exit: | |
| spin_unlock(&ep->lock); | |
| return mask; | |
| } | |
| /** | |
| * scif_poll() - Kernel mode SCIF poll | |
| * @ufds: Array of scif_pollepd structures containing the end points | |
| * and events to poll on | |
| * @nfds: Size of the ufds array | |
| * @timeout_msecs: Timeout in msecs, -ve implies infinite timeout | |
| * | |
| * The code flow in this function is based on do_poll(..) in select.c | |
| * | |
| * Returns the number of endpoints which have pending events or 0 in | |
| * the event of a timeout. If a signal is used for wake up, -EINTR is | |
| * returned. | |
| */ | |
| int | |
| scif_poll(struct scif_pollepd *ufds, unsigned int nfds, long timeout_msecs) | |
| { | |
| struct poll_wqueues table; | |
| poll_table *pt; | |
| int i, mask, count = 0, timed_out = timeout_msecs == 0; | |
| u64 timeout = timeout_msecs < 0 ? MAX_SCHEDULE_TIMEOUT | |
| : msecs_to_jiffies(timeout_msecs); | |
| poll_initwait(&table); | |
| pt = &table.pt; | |
| while (1) { | |
| for (i = 0; i < nfds; i++) { | |
| pt->_key = ufds[i].events | POLLERR | POLLHUP; | |
| mask = __scif_pollfd(ufds[i].epd->anon, | |
| pt, ufds[i].epd); | |
| mask &= ufds[i].events | POLLERR | POLLHUP; | |
| if (mask) { | |
| count++; | |
| pt->_qproc = NULL; | |
| } | |
| ufds[i].revents = mask; | |
| } | |
| pt->_qproc = NULL; | |
| if (!count) { | |
| count = table.error; | |
| if (signal_pending(current)) | |
| count = -EINTR; | |
| } | |
| if (count || timed_out) | |
| break; | |
| if (!schedule_timeout_interruptible(timeout)) | |
| timed_out = 1; | |
| } | |
| poll_freewait(&table); | |
| return count; | |
| } | |
| EXPORT_SYMBOL_GPL(scif_poll); | |
| int scif_get_node_ids(u16 *nodes, int len, u16 *self) | |
| { | |
| int online = 0; | |
| int offset = 0; | |
| int node; | |
| if (!scif_is_mgmt_node()) | |
| scif_get_node_info(); | |
| *self = scif_info.nodeid; | |
| mutex_lock(&scif_info.conflock); | |
| len = min_t(int, len, scif_info.total); | |
| for (node = 0; node <= scif_info.maxid; node++) { | |
| if (_scifdev_alive(&scif_dev[node])) { | |
| online++; | |
| if (offset < len) | |
| nodes[offset++] = node; | |
| } | |
| } | |
| dev_dbg(scif_info.mdev.this_device, | |
| "SCIFAPI get_node_ids total %d online %d filled in %d nodes\n", | |
| scif_info.total, online, offset); | |
| mutex_unlock(&scif_info.conflock); | |
| return online; | |
| } | |
| EXPORT_SYMBOL_GPL(scif_get_node_ids); | |
| static int scif_add_client_dev(struct device *dev, struct subsys_interface *si) | |
| { | |
| struct scif_client *client = | |
| container_of(si, struct scif_client, si); | |
| struct scif_peer_dev *spdev = | |
| container_of(dev, struct scif_peer_dev, dev); | |
| if (client->probe) | |
| client->probe(spdev); | |
| return 0; | |
| } | |
| static void scif_remove_client_dev(struct device *dev, | |
| struct subsys_interface *si) | |
| { | |
| struct scif_client *client = | |
| container_of(si, struct scif_client, si); | |
| struct scif_peer_dev *spdev = | |
| container_of(dev, struct scif_peer_dev, dev); | |
| if (client->remove) | |
| client->remove(spdev); | |
| } | |
| void scif_client_unregister(struct scif_client *client) | |
| { | |
| subsys_interface_unregister(&client->si); | |
| } | |
| EXPORT_SYMBOL_GPL(scif_client_unregister); | |
| int scif_client_register(struct scif_client *client) | |
| { | |
| struct subsys_interface *si = &client->si; | |
| si->name = client->name; | |
| si->subsys = &scif_peer_bus; | |
| si->add_dev = scif_add_client_dev; | |
| si->remove_dev = scif_remove_client_dev; | |
| return subsys_interface_register(&client->si); | |
| } | |
| EXPORT_SYMBOL_GPL(scif_client_register); |