| /* | |
| * sdricoh_cs.c - driver for Ricoh Secure Digital Card Readers that can be | |
| * found on some Ricoh RL5c476 II cardbus bridge | |
| * | |
| * Copyright (C) 2006 - 2008 Sascha Sommer <saschasommer@freenet.de> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| * | |
| */ | |
| /* | |
| #define DEBUG | |
| #define VERBOSE_DEBUG | |
| */ | |
| #include <linux/delay.h> | |
| #include <linux/highmem.h> | |
| #include <linux/module.h> | |
| #include <linux/pci.h> | |
| #include <linux/ioport.h> | |
| #include <linux/scatterlist.h> | |
| #include <pcmcia/cistpl.h> | |
| #include <pcmcia/ds.h> | |
| #include <linux/io.h> | |
| #include <linux/mmc/host.h> | |
| #define DRIVER_NAME "sdricoh_cs" | |
| static unsigned int switchlocked; | |
| /* i/o region */ | |
| #define SDRICOH_PCI_REGION 0 | |
| #define SDRICOH_PCI_REGION_SIZE 0x1000 | |
| /* registers */ | |
| #define R104_VERSION 0x104 | |
| #define R200_CMD 0x200 | |
| #define R204_CMD_ARG 0x204 | |
| #define R208_DATAIO 0x208 | |
| #define R20C_RESP 0x20c | |
| #define R21C_STATUS 0x21c | |
| #define R2E0_INIT 0x2e0 | |
| #define R2E4_STATUS_RESP 0x2e4 | |
| #define R2F0_RESET 0x2f0 | |
| #define R224_MODE 0x224 | |
| #define R226_BLOCKSIZE 0x226 | |
| #define R228_POWER 0x228 | |
| #define R230_DATA 0x230 | |
| /* flags for the R21C_STATUS register */ | |
| #define STATUS_CMD_FINISHED 0x00000001 | |
| #define STATUS_TRANSFER_FINISHED 0x00000004 | |
| #define STATUS_CARD_INSERTED 0x00000020 | |
| #define STATUS_CARD_LOCKED 0x00000080 | |
| #define STATUS_CMD_TIMEOUT 0x00400000 | |
| #define STATUS_READY_TO_READ 0x01000000 | |
| #define STATUS_READY_TO_WRITE 0x02000000 | |
| #define STATUS_BUSY 0x40000000 | |
| /* timeouts */ | |
| #define INIT_TIMEOUT 100 | |
| #define CMD_TIMEOUT 100000 | |
| #define TRANSFER_TIMEOUT 100000 | |
| #define BUSY_TIMEOUT 32767 | |
| /* list of supported pcmcia devices */ | |
| static const struct pcmcia_device_id pcmcia_ids[] = { | |
| /* vendor and device strings followed by their crc32 hashes */ | |
| PCMCIA_DEVICE_PROD_ID12("RICOH", "Bay1Controller", 0xd9f522ed, | |
| 0xc3901202), | |
| PCMCIA_DEVICE_PROD_ID12("RICOH", "Bay Controller", 0xd9f522ed, | |
| 0xace80909), | |
| PCMCIA_DEVICE_NULL, | |
| }; | |
| MODULE_DEVICE_TABLE(pcmcia, pcmcia_ids); | |
| /* mmc privdata */ | |
| struct sdricoh_host { | |
| struct device *dev; | |
| struct mmc_host *mmc; /* MMC structure */ | |
| unsigned char __iomem *iobase; | |
| struct pci_dev *pci_dev; | |
| int app_cmd; | |
| }; | |
| /***************** register i/o helper functions *****************************/ | |
| static inline unsigned int sdricoh_readl(struct sdricoh_host *host, | |
| unsigned int reg) | |
| { | |
| unsigned int value = readl(host->iobase + reg); | |
| dev_vdbg(host->dev, "rl %x 0x%x\n", reg, value); | |
| return value; | |
| } | |
| static inline void sdricoh_writel(struct sdricoh_host *host, unsigned int reg, | |
| unsigned int value) | |
| { | |
| writel(value, host->iobase + reg); | |
| dev_vdbg(host->dev, "wl %x 0x%x\n", reg, value); | |
| } | |
| static inline unsigned int sdricoh_readw(struct sdricoh_host *host, | |
| unsigned int reg) | |
| { | |
| unsigned int value = readw(host->iobase + reg); | |
| dev_vdbg(host->dev, "rb %x 0x%x\n", reg, value); | |
| return value; | |
| } | |
| static inline void sdricoh_writew(struct sdricoh_host *host, unsigned int reg, | |
| unsigned short value) | |
| { | |
| writew(value, host->iobase + reg); | |
| dev_vdbg(host->dev, "ww %x 0x%x\n", reg, value); | |
| } | |
| static inline unsigned int sdricoh_readb(struct sdricoh_host *host, | |
| unsigned int reg) | |
| { | |
| unsigned int value = readb(host->iobase + reg); | |
| dev_vdbg(host->dev, "rb %x 0x%x\n", reg, value); | |
| return value; | |
| } | |
| static int sdricoh_query_status(struct sdricoh_host *host, unsigned int wanted, | |
| unsigned int timeout){ | |
| unsigned int loop; | |
| unsigned int status = 0; | |
| struct device *dev = host->dev; | |
| for (loop = 0; loop < timeout; loop++) { | |
| status = sdricoh_readl(host, R21C_STATUS); | |
| sdricoh_writel(host, R2E4_STATUS_RESP, status); | |
| if (status & wanted) | |
| break; | |
| } | |
| if (loop == timeout) { | |
| dev_err(dev, "query_status: timeout waiting for %x\n", wanted); | |
| return -ETIMEDOUT; | |
| } | |
| /* do not do this check in the loop as some commands fail otherwise */ | |
| if (status & 0x7F0000) { | |
| dev_err(dev, "waiting for status bit %x failed\n", wanted); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int sdricoh_mmc_cmd(struct sdricoh_host *host, unsigned char opcode, | |
| unsigned int arg) | |
| { | |
| unsigned int status; | |
| int result = 0; | |
| unsigned int loop = 0; | |
| /* reset status reg? */ | |
| sdricoh_writel(host, R21C_STATUS, 0x18); | |
| /* fill parameters */ | |
| sdricoh_writel(host, R204_CMD_ARG, arg); | |
| sdricoh_writel(host, R200_CMD, (0x10000 << 8) | opcode); | |
| /* wait for command completion */ | |
| if (opcode) { | |
| for (loop = 0; loop < CMD_TIMEOUT; loop++) { | |
| status = sdricoh_readl(host, R21C_STATUS); | |
| sdricoh_writel(host, R2E4_STATUS_RESP, status); | |
| if (status & STATUS_CMD_FINISHED) | |
| break; | |
| } | |
| /* don't check for timeout in the loop it is not always | |
| reset correctly | |
| */ | |
| if (loop == CMD_TIMEOUT || status & STATUS_CMD_TIMEOUT) | |
| result = -ETIMEDOUT; | |
| } | |
| return result; | |
| } | |
| static int sdricoh_reset(struct sdricoh_host *host) | |
| { | |
| dev_dbg(host->dev, "reset\n"); | |
| sdricoh_writel(host, R2F0_RESET, 0x10001); | |
| sdricoh_writel(host, R2E0_INIT, 0x10000); | |
| if (sdricoh_readl(host, R2E0_INIT) != 0x10000) | |
| return -EIO; | |
| sdricoh_writel(host, R2E0_INIT, 0x10007); | |
| sdricoh_writel(host, R224_MODE, 0x2000000); | |
| sdricoh_writel(host, R228_POWER, 0xe0); | |
| /* status register ? */ | |
| sdricoh_writel(host, R21C_STATUS, 0x18); | |
| return 0; | |
| } | |
| static int sdricoh_blockio(struct sdricoh_host *host, int read, | |
| u8 *buf, int len) | |
| { | |
| int size; | |
| u32 data = 0; | |
| /* wait until the data is available */ | |
| if (read) { | |
| if (sdricoh_query_status(host, STATUS_READY_TO_READ, | |
| TRANSFER_TIMEOUT)) | |
| return -ETIMEDOUT; | |
| sdricoh_writel(host, R21C_STATUS, 0x18); | |
| /* read data */ | |
| while (len) { | |
| data = sdricoh_readl(host, R230_DATA); | |
| size = min(len, 4); | |
| len -= size; | |
| while (size) { | |
| *buf = data & 0xFF; | |
| buf++; | |
| data >>= 8; | |
| size--; | |
| } | |
| } | |
| } else { | |
| if (sdricoh_query_status(host, STATUS_READY_TO_WRITE, | |
| TRANSFER_TIMEOUT)) | |
| return -ETIMEDOUT; | |
| sdricoh_writel(host, R21C_STATUS, 0x18); | |
| /* write data */ | |
| while (len) { | |
| size = min(len, 4); | |
| len -= size; | |
| while (size) { | |
| data >>= 8; | |
| data |= (u32)*buf << 24; | |
| buf++; | |
| size--; | |
| } | |
| sdricoh_writel(host, R230_DATA, data); | |
| } | |
| } | |
| if (len) | |
| return -EIO; | |
| return 0; | |
| } | |
| static void sdricoh_request(struct mmc_host *mmc, struct mmc_request *mrq) | |
| { | |
| struct sdricoh_host *host = mmc_priv(mmc); | |
| struct mmc_command *cmd = mrq->cmd; | |
| struct mmc_data *data = cmd->data; | |
| struct device *dev = host->dev; | |
| unsigned char opcode = cmd->opcode; | |
| int i; | |
| dev_dbg(dev, "=============================\n"); | |
| dev_dbg(dev, "sdricoh_request opcode=%i\n", opcode); | |
| sdricoh_writel(host, R21C_STATUS, 0x18); | |
| /* MMC_APP_CMDs need some special handling */ | |
| if (host->app_cmd) { | |
| opcode |= 64; | |
| host->app_cmd = 0; | |
| } else if (opcode == 55) | |
| host->app_cmd = 1; | |
| /* read/write commands seem to require this */ | |
| if (data) { | |
| sdricoh_writew(host, R226_BLOCKSIZE, data->blksz); | |
| sdricoh_writel(host, R208_DATAIO, 0); | |
| } | |
| cmd->error = sdricoh_mmc_cmd(host, opcode, cmd->arg); | |
| /* read response buffer */ | |
| if (cmd->flags & MMC_RSP_PRESENT) { | |
| if (cmd->flags & MMC_RSP_136) { | |
| /* CRC is stripped so we need to do some shifting. */ | |
| for (i = 0; i < 4; i++) { | |
| cmd->resp[i] = | |
| sdricoh_readl(host, | |
| R20C_RESP + (3 - i) * 4) << 8; | |
| if (i != 3) | |
| cmd->resp[i] |= | |
| sdricoh_readb(host, R20C_RESP + | |
| (3 - i) * 4 - 1); | |
| } | |
| } else | |
| cmd->resp[0] = sdricoh_readl(host, R20C_RESP); | |
| } | |
| /* transfer data */ | |
| if (data && cmd->error == 0) { | |
| dev_dbg(dev, "transfer: blksz %i blocks %i sg_len %i " | |
| "sg length %i\n", data->blksz, data->blocks, | |
| data->sg_len, data->sg->length); | |
| /* enter data reading mode */ | |
| sdricoh_writel(host, R21C_STATUS, 0x837f031e); | |
| for (i = 0; i < data->blocks; i++) { | |
| size_t len = data->blksz; | |
| u8 *buf; | |
| struct page *page; | |
| int result; | |
| page = sg_page(data->sg); | |
| buf = kmap(page) + data->sg->offset + (len * i); | |
| result = | |
| sdricoh_blockio(host, | |
| data->flags & MMC_DATA_READ, buf, len); | |
| kunmap(page); | |
| flush_dcache_page(page); | |
| if (result) { | |
| dev_err(dev, "sdricoh_request: cmd %i " | |
| "block transfer failed\n", cmd->opcode); | |
| cmd->error = result; | |
| break; | |
| } else | |
| data->bytes_xfered += len; | |
| } | |
| sdricoh_writel(host, R208_DATAIO, 1); | |
| if (sdricoh_query_status(host, STATUS_TRANSFER_FINISHED, | |
| TRANSFER_TIMEOUT)) { | |
| dev_err(dev, "sdricoh_request: transfer end error\n"); | |
| cmd->error = -EINVAL; | |
| } | |
| } | |
| /* FIXME check busy flag */ | |
| mmc_request_done(mmc, mrq); | |
| dev_dbg(dev, "=============================\n"); | |
| } | |
| static void sdricoh_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) | |
| { | |
| struct sdricoh_host *host = mmc_priv(mmc); | |
| dev_dbg(host->dev, "set_ios\n"); | |
| if (ios->power_mode == MMC_POWER_ON) { | |
| sdricoh_writel(host, R228_POWER, 0xc0e0); | |
| if (ios->bus_width == MMC_BUS_WIDTH_4) { | |
| sdricoh_writel(host, R224_MODE, 0x2000300); | |
| sdricoh_writel(host, R228_POWER, 0x40e0); | |
| } else { | |
| sdricoh_writel(host, R224_MODE, 0x2000340); | |
| } | |
| } else if (ios->power_mode == MMC_POWER_UP) { | |
| sdricoh_writel(host, R224_MODE, 0x2000320); | |
| sdricoh_writel(host, R228_POWER, 0xe0); | |
| } | |
| } | |
| static int sdricoh_get_ro(struct mmc_host *mmc) | |
| { | |
| struct sdricoh_host *host = mmc_priv(mmc); | |
| unsigned int status; | |
| status = sdricoh_readl(host, R21C_STATUS); | |
| sdricoh_writel(host, R2E4_STATUS_RESP, status); | |
| /* some notebooks seem to have the locked flag switched */ | |
| if (switchlocked) | |
| return !(status & STATUS_CARD_LOCKED); | |
| return (status & STATUS_CARD_LOCKED); | |
| } | |
| static struct mmc_host_ops sdricoh_ops = { | |
| .request = sdricoh_request, | |
| .set_ios = sdricoh_set_ios, | |
| .get_ro = sdricoh_get_ro, | |
| }; | |
| /* initialize the control and register it to the mmc framework */ | |
| static int sdricoh_init_mmc(struct pci_dev *pci_dev, | |
| struct pcmcia_device *pcmcia_dev) | |
| { | |
| int result; | |
| void __iomem *iobase; | |
| struct mmc_host *mmc; | |
| struct sdricoh_host *host; | |
| struct device *dev = &pcmcia_dev->dev; | |
| /* map iomem */ | |
| if (pci_resource_len(pci_dev, SDRICOH_PCI_REGION) != | |
| SDRICOH_PCI_REGION_SIZE) { | |
| dev_dbg(dev, "unexpected pci resource len\n"); | |
| return -ENODEV; | |
| } | |
| iobase = | |
| pci_iomap(pci_dev, SDRICOH_PCI_REGION, SDRICOH_PCI_REGION_SIZE); | |
| if (!iobase) { | |
| dev_err(dev, "unable to map iobase\n"); | |
| return -ENODEV; | |
| } | |
| /* check version? */ | |
| if (readl(iobase + R104_VERSION) != 0x4000) { | |
| dev_dbg(dev, "no supported mmc controller found\n"); | |
| result = -ENODEV; | |
| goto unmap_io; | |
| } | |
| /* allocate privdata */ | |
| mmc = pcmcia_dev->priv = | |
| mmc_alloc_host(sizeof(struct sdricoh_host), &pcmcia_dev->dev); | |
| if (!mmc) { | |
| dev_err(dev, "mmc_alloc_host failed\n"); | |
| result = -ENOMEM; | |
| goto unmap_io; | |
| } | |
| host = mmc_priv(mmc); | |
| host->iobase = iobase; | |
| host->dev = dev; | |
| host->pci_dev = pci_dev; | |
| mmc->ops = &sdricoh_ops; | |
| /* FIXME: frequency and voltage handling is done by the controller | |
| */ | |
| mmc->f_min = 450000; | |
| mmc->f_max = 24000000; | |
| mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; | |
| mmc->caps |= MMC_CAP_4_BIT_DATA; | |
| mmc->max_seg_size = 1024 * 512; | |
| mmc->max_blk_size = 512; | |
| /* reset the controller */ | |
| if (sdricoh_reset(host)) { | |
| dev_dbg(dev, "could not reset\n"); | |
| result = -EIO; | |
| goto free_host; | |
| } | |
| result = mmc_add_host(mmc); | |
| if (!result) { | |
| dev_dbg(dev, "mmc host registered\n"); | |
| return 0; | |
| } | |
| free_host: | |
| mmc_free_host(mmc); | |
| unmap_io: | |
| pci_iounmap(pci_dev, iobase); | |
| return result; | |
| } | |
| /* search for supported mmc controllers */ | |
| static int sdricoh_pcmcia_probe(struct pcmcia_device *pcmcia_dev) | |
| { | |
| struct pci_dev *pci_dev = NULL; | |
| dev_info(&pcmcia_dev->dev, "Searching MMC controller for pcmcia device" | |
| " %s %s ...\n", pcmcia_dev->prod_id[0], pcmcia_dev->prod_id[1]); | |
| /* search pci cardbus bridge that contains the mmc controller */ | |
| /* the io region is already claimed by yenta_socket... */ | |
| while ((pci_dev = | |
| pci_get_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, | |
| pci_dev))) { | |
| /* try to init the device */ | |
| if (!sdricoh_init_mmc(pci_dev, pcmcia_dev)) { | |
| dev_info(&pcmcia_dev->dev, "MMC controller found\n"); | |
| return 0; | |
| } | |
| } | |
| dev_err(&pcmcia_dev->dev, "No MMC controller was found.\n"); | |
| return -ENODEV; | |
| } | |
| static void sdricoh_pcmcia_detach(struct pcmcia_device *link) | |
| { | |
| struct mmc_host *mmc = link->priv; | |
| dev_dbg(&link->dev, "detach\n"); | |
| /* remove mmc host */ | |
| if (mmc) { | |
| struct sdricoh_host *host = mmc_priv(mmc); | |
| mmc_remove_host(mmc); | |
| pci_iounmap(host->pci_dev, host->iobase); | |
| pci_dev_put(host->pci_dev); | |
| mmc_free_host(mmc); | |
| } | |
| pcmcia_disable_device(link); | |
| } | |
| #ifdef CONFIG_PM | |
| static int sdricoh_pcmcia_suspend(struct pcmcia_device *link) | |
| { | |
| dev_dbg(&link->dev, "suspend\n"); | |
| return 0; | |
| } | |
| static int sdricoh_pcmcia_resume(struct pcmcia_device *link) | |
| { | |
| struct mmc_host *mmc = link->priv; | |
| dev_dbg(&link->dev, "resume\n"); | |
| sdricoh_reset(mmc_priv(mmc)); | |
| return 0; | |
| } | |
| #else | |
| #define sdricoh_pcmcia_suspend NULL | |
| #define sdricoh_pcmcia_resume NULL | |
| #endif | |
| static struct pcmcia_driver sdricoh_driver = { | |
| .name = DRIVER_NAME, | |
| .probe = sdricoh_pcmcia_probe, | |
| .remove = sdricoh_pcmcia_detach, | |
| .id_table = pcmcia_ids, | |
| .suspend = sdricoh_pcmcia_suspend, | |
| .resume = sdricoh_pcmcia_resume, | |
| }; | |
| module_pcmcia_driver(sdricoh_driver); | |
| module_param(switchlocked, uint, 0444); | |
| MODULE_AUTHOR("Sascha Sommer <saschasommer@freenet.de>"); | |
| MODULE_DESCRIPTION("Ricoh PCMCIA Secure Digital Interface driver"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_PARM_DESC(switchlocked, "Switch the cards locked status." | |
| "Use this when unlocked cards are shown readonly (default 0)"); |