| /* | |
| * Copyright (C) 2013-2014 Renesas Electronics Europe Ltd. | |
| * Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of version 2 of the GNU General Public License as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/clk.h> | |
| #include <linux/delay.h> | |
| #include <linux/device.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/dmaengine.h> | |
| #include <linux/highmem.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/io.h> | |
| #include <linux/log2.h> | |
| #include <linux/mmc/host.h> | |
| #include <linux/mmc/mmc.h> | |
| #include <linux/mmc/sd.h> | |
| #include <linux/mmc/sdio.h> | |
| #include <linux/module.h> | |
| #include <linux/pagemap.h> | |
| #include <linux/pinctrl/consumer.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/scatterlist.h> | |
| #include <linux/string.h> | |
| #include <linux/time.h> | |
| #include <linux/virtio.h> | |
| #include <linux/workqueue.h> | |
| #define USDHI6_SD_CMD 0x0000 | |
| #define USDHI6_SD_PORT_SEL 0x0004 | |
| #define USDHI6_SD_ARG 0x0008 | |
| #define USDHI6_SD_STOP 0x0010 | |
| #define USDHI6_SD_SECCNT 0x0014 | |
| #define USDHI6_SD_RSP10 0x0018 | |
| #define USDHI6_SD_RSP32 0x0020 | |
| #define USDHI6_SD_RSP54 0x0028 | |
| #define USDHI6_SD_RSP76 0x0030 | |
| #define USDHI6_SD_INFO1 0x0038 | |
| #define USDHI6_SD_INFO2 0x003c | |
| #define USDHI6_SD_INFO1_MASK 0x0040 | |
| #define USDHI6_SD_INFO2_MASK 0x0044 | |
| #define USDHI6_SD_CLK_CTRL 0x0048 | |
| #define USDHI6_SD_SIZE 0x004c | |
| #define USDHI6_SD_OPTION 0x0050 | |
| #define USDHI6_SD_ERR_STS1 0x0058 | |
| #define USDHI6_SD_ERR_STS2 0x005c | |
| #define USDHI6_SD_BUF0 0x0060 | |
| #define USDHI6_SDIO_MODE 0x0068 | |
| #define USDHI6_SDIO_INFO1 0x006c | |
| #define USDHI6_SDIO_INFO1_MASK 0x0070 | |
| #define USDHI6_CC_EXT_MODE 0x01b0 | |
| #define USDHI6_SOFT_RST 0x01c0 | |
| #define USDHI6_VERSION 0x01c4 | |
| #define USDHI6_HOST_MODE 0x01c8 | |
| #define USDHI6_SDIF_MODE 0x01cc | |
| #define USDHI6_SD_CMD_APP 0x0040 | |
| #define USDHI6_SD_CMD_MODE_RSP_AUTO 0x0000 | |
| #define USDHI6_SD_CMD_MODE_RSP_NONE 0x0300 | |
| #define USDHI6_SD_CMD_MODE_RSP_R1 0x0400 /* Also R5, R6, R7 */ | |
| #define USDHI6_SD_CMD_MODE_RSP_R1B 0x0500 /* R1b */ | |
| #define USDHI6_SD_CMD_MODE_RSP_R2 0x0600 | |
| #define USDHI6_SD_CMD_MODE_RSP_R3 0x0700 /* Also R4 */ | |
| #define USDHI6_SD_CMD_DATA 0x0800 | |
| #define USDHI6_SD_CMD_READ 0x1000 | |
| #define USDHI6_SD_CMD_MULTI 0x2000 | |
| #define USDHI6_SD_CMD_CMD12_AUTO_OFF 0x4000 | |
| #define USDHI6_CC_EXT_MODE_SDRW BIT(1) | |
| #define USDHI6_SD_INFO1_RSP_END BIT(0) | |
| #define USDHI6_SD_INFO1_ACCESS_END BIT(2) | |
| #define USDHI6_SD_INFO1_CARD_OUT BIT(3) | |
| #define USDHI6_SD_INFO1_CARD_IN BIT(4) | |
| #define USDHI6_SD_INFO1_CD BIT(5) | |
| #define USDHI6_SD_INFO1_WP BIT(7) | |
| #define USDHI6_SD_INFO1_D3_CARD_OUT BIT(8) | |
| #define USDHI6_SD_INFO1_D3_CARD_IN BIT(9) | |
| #define USDHI6_SD_INFO2_CMD_ERR BIT(0) | |
| #define USDHI6_SD_INFO2_CRC_ERR BIT(1) | |
| #define USDHI6_SD_INFO2_END_ERR BIT(2) | |
| #define USDHI6_SD_INFO2_TOUT BIT(3) | |
| #define USDHI6_SD_INFO2_IWA_ERR BIT(4) | |
| #define USDHI6_SD_INFO2_IRA_ERR BIT(5) | |
| #define USDHI6_SD_INFO2_RSP_TOUT BIT(6) | |
| #define USDHI6_SD_INFO2_SDDAT0 BIT(7) | |
| #define USDHI6_SD_INFO2_BRE BIT(8) | |
| #define USDHI6_SD_INFO2_BWE BIT(9) | |
| #define USDHI6_SD_INFO2_SCLKDIVEN BIT(13) | |
| #define USDHI6_SD_INFO2_CBSY BIT(14) | |
| #define USDHI6_SD_INFO2_ILA BIT(15) | |
| #define USDHI6_SD_INFO1_CARD_INSERT (USDHI6_SD_INFO1_CARD_IN | USDHI6_SD_INFO1_D3_CARD_IN) | |
| #define USDHI6_SD_INFO1_CARD_EJECT (USDHI6_SD_INFO1_CARD_OUT | USDHI6_SD_INFO1_D3_CARD_OUT) | |
| #define USDHI6_SD_INFO1_CARD (USDHI6_SD_INFO1_CARD_INSERT | USDHI6_SD_INFO1_CARD_EJECT) | |
| #define USDHI6_SD_INFO1_CARD_CD (USDHI6_SD_INFO1_CARD_IN | USDHI6_SD_INFO1_CARD_OUT) | |
| #define USDHI6_SD_INFO2_ERR (USDHI6_SD_INFO2_CMD_ERR | \ | |
| USDHI6_SD_INFO2_CRC_ERR | USDHI6_SD_INFO2_END_ERR | \ | |
| USDHI6_SD_INFO2_TOUT | USDHI6_SD_INFO2_IWA_ERR | \ | |
| USDHI6_SD_INFO2_IRA_ERR | USDHI6_SD_INFO2_RSP_TOUT | \ | |
| USDHI6_SD_INFO2_ILA) | |
| #define USDHI6_SD_INFO1_IRQ (USDHI6_SD_INFO1_RSP_END | USDHI6_SD_INFO1_ACCESS_END | \ | |
| USDHI6_SD_INFO1_CARD) | |
| #define USDHI6_SD_INFO2_IRQ (USDHI6_SD_INFO2_ERR | USDHI6_SD_INFO2_BRE | \ | |
| USDHI6_SD_INFO2_BWE | 0x0800 | USDHI6_SD_INFO2_ILA) | |
| #define USDHI6_SD_CLK_CTRL_SCLKEN BIT(8) | |
| #define USDHI6_SD_STOP_STP BIT(0) | |
| #define USDHI6_SD_STOP_SEC BIT(8) | |
| #define USDHI6_SDIO_INFO1_IOIRQ BIT(0) | |
| #define USDHI6_SDIO_INFO1_EXPUB52 BIT(14) | |
| #define USDHI6_SDIO_INFO1_EXWT BIT(15) | |
| #define USDHI6_SD_ERR_STS1_CRC_NO_ERROR BIT(13) | |
| #define USDHI6_SOFT_RST_RESERVED (BIT(1) | BIT(2)) | |
| #define USDHI6_SOFT_RST_RESET BIT(0) | |
| #define USDHI6_SD_OPTION_TIMEOUT_SHIFT 4 | |
| #define USDHI6_SD_OPTION_TIMEOUT_MASK (0xf << USDHI6_SD_OPTION_TIMEOUT_SHIFT) | |
| #define USDHI6_SD_OPTION_WIDTH_1 BIT(15) | |
| #define USDHI6_SD_PORT_SEL_PORTS_SHIFT 8 | |
| #define USDHI6_SD_CLK_CTRL_DIV_MASK 0xff | |
| #define USDHI6_SDIO_INFO1_IRQ (USDHI6_SDIO_INFO1_IOIRQ | 3 | \ | |
| USDHI6_SDIO_INFO1_EXPUB52 | USDHI6_SDIO_INFO1_EXWT) | |
| #define USDHI6_MIN_DMA 64 | |
| enum usdhi6_wait_for { | |
| USDHI6_WAIT_FOR_REQUEST, | |
| USDHI6_WAIT_FOR_CMD, | |
| USDHI6_WAIT_FOR_MREAD, | |
| USDHI6_WAIT_FOR_MWRITE, | |
| USDHI6_WAIT_FOR_READ, | |
| USDHI6_WAIT_FOR_WRITE, | |
| USDHI6_WAIT_FOR_DATA_END, | |
| USDHI6_WAIT_FOR_STOP, | |
| USDHI6_WAIT_FOR_DMA, | |
| }; | |
| struct usdhi6_page { | |
| struct page *page; | |
| void *mapped; /* mapped page */ | |
| }; | |
| struct usdhi6_host { | |
| struct mmc_host *mmc; | |
| struct mmc_request *mrq; | |
| void __iomem *base; | |
| struct clk *clk; | |
| /* SG memory handling */ | |
| /* Common for multiple and single block requests */ | |
| struct usdhi6_page pg; /* current page from an SG */ | |
| void *blk_page; /* either a mapped page, or the bounce buffer */ | |
| size_t offset; /* offset within a page, including sg->offset */ | |
| /* Blocks, crossing a page boundary */ | |
| size_t head_len; | |
| struct usdhi6_page head_pg; | |
| /* A bounce buffer for unaligned blocks or blocks, crossing a page boundary */ | |
| struct scatterlist bounce_sg; | |
| u8 bounce_buf[512]; | |
| /* Multiple block requests only */ | |
| struct scatterlist *sg; /* current SG segment */ | |
| int page_idx; /* page index within an SG segment */ | |
| enum usdhi6_wait_for wait; | |
| u32 status_mask; | |
| u32 status2_mask; | |
| u32 sdio_mask; | |
| u32 io_error; | |
| u32 irq_status; | |
| unsigned long imclk; | |
| unsigned long rate; | |
| bool app_cmd; | |
| /* Timeout handling */ | |
| struct delayed_work timeout_work; | |
| unsigned long timeout; | |
| /* DMA support */ | |
| struct dma_chan *chan_rx; | |
| struct dma_chan *chan_tx; | |
| bool dma_active; | |
| /* Pin control */ | |
| struct pinctrl *pinctrl; | |
| struct pinctrl_state *pins_default; | |
| struct pinctrl_state *pins_uhs; | |
| }; | |
| /* I/O primitives */ | |
| static void usdhi6_write(struct usdhi6_host *host, u32 reg, u32 data) | |
| { | |
| iowrite32(data, host->base + reg); | |
| dev_vdbg(mmc_dev(host->mmc), "%s(0x%p + 0x%x) = 0x%x\n", __func__, | |
| host->base, reg, data); | |
| } | |
| static void usdhi6_write16(struct usdhi6_host *host, u32 reg, u16 data) | |
| { | |
| iowrite16(data, host->base + reg); | |
| dev_vdbg(mmc_dev(host->mmc), "%s(0x%p + 0x%x) = 0x%x\n", __func__, | |
| host->base, reg, data); | |
| } | |
| static u32 usdhi6_read(struct usdhi6_host *host, u32 reg) | |
| { | |
| u32 data = ioread32(host->base + reg); | |
| dev_vdbg(mmc_dev(host->mmc), "%s(0x%p + 0x%x) = 0x%x\n", __func__, | |
| host->base, reg, data); | |
| return data; | |
| } | |
| static u16 usdhi6_read16(struct usdhi6_host *host, u32 reg) | |
| { | |
| u16 data = ioread16(host->base + reg); | |
| dev_vdbg(mmc_dev(host->mmc), "%s(0x%p + 0x%x) = 0x%x\n", __func__, | |
| host->base, reg, data); | |
| return data; | |
| } | |
| static void usdhi6_irq_enable(struct usdhi6_host *host, u32 info1, u32 info2) | |
| { | |
| host->status_mask = USDHI6_SD_INFO1_IRQ & ~info1; | |
| host->status2_mask = USDHI6_SD_INFO2_IRQ & ~info2; | |
| usdhi6_write(host, USDHI6_SD_INFO1_MASK, host->status_mask); | |
| usdhi6_write(host, USDHI6_SD_INFO2_MASK, host->status2_mask); | |
| } | |
| static void usdhi6_wait_for_resp(struct usdhi6_host *host) | |
| { | |
| usdhi6_irq_enable(host, USDHI6_SD_INFO1_RSP_END | | |
| USDHI6_SD_INFO1_ACCESS_END | USDHI6_SD_INFO1_CARD_CD, | |
| USDHI6_SD_INFO2_ERR); | |
| } | |
| static void usdhi6_wait_for_brwe(struct usdhi6_host *host, bool read) | |
| { | |
| usdhi6_irq_enable(host, USDHI6_SD_INFO1_ACCESS_END | | |
| USDHI6_SD_INFO1_CARD_CD, USDHI6_SD_INFO2_ERR | | |
| (read ? USDHI6_SD_INFO2_BRE : USDHI6_SD_INFO2_BWE)); | |
| } | |
| static void usdhi6_only_cd(struct usdhi6_host *host) | |
| { | |
| /* Mask all except card hotplug */ | |
| usdhi6_irq_enable(host, USDHI6_SD_INFO1_CARD_CD, 0); | |
| } | |
| static void usdhi6_mask_all(struct usdhi6_host *host) | |
| { | |
| usdhi6_irq_enable(host, 0, 0); | |
| } | |
| static int usdhi6_error_code(struct usdhi6_host *host) | |
| { | |
| u32 err; | |
| usdhi6_write(host, USDHI6_SD_STOP, USDHI6_SD_STOP_STP); | |
| if (host->io_error & | |
| (USDHI6_SD_INFO2_RSP_TOUT | USDHI6_SD_INFO2_TOUT)) { | |
| u32 rsp54 = usdhi6_read(host, USDHI6_SD_RSP54); | |
| int opc = host->mrq ? host->mrq->cmd->opcode : -1; | |
| err = usdhi6_read(host, USDHI6_SD_ERR_STS2); | |
| /* Response timeout is often normal, don't spam the log */ | |
| if (host->wait == USDHI6_WAIT_FOR_CMD) | |
| dev_dbg(mmc_dev(host->mmc), | |
| "T-out sts 0x%x, resp 0x%x, state %u, CMD%d\n", | |
| err, rsp54, host->wait, opc); | |
| else | |
| dev_warn(mmc_dev(host->mmc), | |
| "T-out sts 0x%x, resp 0x%x, state %u, CMD%d\n", | |
| err, rsp54, host->wait, opc); | |
| return -ETIMEDOUT; | |
| } | |
| err = usdhi6_read(host, USDHI6_SD_ERR_STS1); | |
| if (err != USDHI6_SD_ERR_STS1_CRC_NO_ERROR) | |
| dev_warn(mmc_dev(host->mmc), "Err sts 0x%x, state %u, CMD%d\n", | |
| err, host->wait, host->mrq ? host->mrq->cmd->opcode : -1); | |
| if (host->io_error & USDHI6_SD_INFO2_ILA) | |
| return -EILSEQ; | |
| return -EIO; | |
| } | |
| /* Scatter-Gather management */ | |
| /* | |
| * In PIO mode we have to map each page separately, using kmap(). That way | |
| * adjacent pages are mapped to non-adjacent virtual addresses. That's why we | |
| * have to use a bounce buffer for blocks, crossing page boundaries. Such blocks | |
| * have been observed with an SDIO WiFi card (b43 driver). | |
| */ | |
| static void usdhi6_blk_bounce(struct usdhi6_host *host, | |
| struct scatterlist *sg) | |
| { | |
| struct mmc_data *data = host->mrq->data; | |
| size_t blk_head = host->head_len; | |
| dev_dbg(mmc_dev(host->mmc), "%s(): CMD%u of %u SG: %ux%u @ 0x%x\n", | |
| __func__, host->mrq->cmd->opcode, data->sg_len, | |
| data->blksz, data->blocks, sg->offset); | |
| host->head_pg.page = host->pg.page; | |
| host->head_pg.mapped = host->pg.mapped; | |
| host->pg.page = nth_page(host->pg.page, 1); | |
| host->pg.mapped = kmap(host->pg.page); | |
| host->blk_page = host->bounce_buf; | |
| host->offset = 0; | |
| if (data->flags & MMC_DATA_READ) | |
| return; | |
| memcpy(host->bounce_buf, host->head_pg.mapped + PAGE_SIZE - blk_head, | |
| blk_head); | |
| memcpy(host->bounce_buf + blk_head, host->pg.mapped, | |
| data->blksz - blk_head); | |
| } | |
| /* Only called for multiple block IO */ | |
| static void usdhi6_sg_prep(struct usdhi6_host *host) | |
| { | |
| struct mmc_request *mrq = host->mrq; | |
| struct mmc_data *data = mrq->data; | |
| usdhi6_write(host, USDHI6_SD_SECCNT, data->blocks); | |
| host->sg = data->sg; | |
| /* TODO: if we always map, this is redundant */ | |
| host->offset = host->sg->offset; | |
| } | |
| /* Map the first page in an SG segment: common for multiple and single block IO */ | |
| static void *usdhi6_sg_map(struct usdhi6_host *host) | |
| { | |
| struct mmc_data *data = host->mrq->data; | |
| struct scatterlist *sg = data->sg_len > 1 ? host->sg : data->sg; | |
| size_t head = PAGE_SIZE - sg->offset; | |
| size_t blk_head = head % data->blksz; | |
| WARN(host->pg.page, "%p not properly unmapped!\n", host->pg.page); | |
| if (WARN(sg_dma_len(sg) % data->blksz, | |
| "SG size %u isn't a multiple of block size %u\n", | |
| sg_dma_len(sg), data->blksz)) | |
| return NULL; | |
| host->pg.page = sg_page(sg); | |
| host->pg.mapped = kmap(host->pg.page); | |
| host->offset = sg->offset; | |
| /* | |
| * Block size must be a power of 2 for multi-block transfers, | |
| * therefore blk_head is equal for all pages in this SG | |
| */ | |
| host->head_len = blk_head; | |
| if (head < data->blksz) | |
| /* | |
| * The first block in the SG crosses a page boundary. | |
| * Max blksz = 512, so blocks can only span 2 pages | |
| */ | |
| usdhi6_blk_bounce(host, sg); | |
| else | |
| host->blk_page = host->pg.mapped; | |
| dev_dbg(mmc_dev(host->mmc), "Mapped %p (%lx) at %p + %u for CMD%u @ 0x%p\n", | |
| host->pg.page, page_to_pfn(host->pg.page), host->pg.mapped, | |
| sg->offset, host->mrq->cmd->opcode, host->mrq); | |
| return host->blk_page + host->offset; | |
| } | |
| /* Unmap the current page: common for multiple and single block IO */ | |
| static void usdhi6_sg_unmap(struct usdhi6_host *host, bool force) | |
| { | |
| struct mmc_data *data = host->mrq->data; | |
| struct page *page = host->head_pg.page; | |
| if (page) { | |
| /* Previous block was cross-page boundary */ | |
| struct scatterlist *sg = data->sg_len > 1 ? | |
| host->sg : data->sg; | |
| size_t blk_head = host->head_len; | |
| if (!data->error && data->flags & MMC_DATA_READ) { | |
| memcpy(host->head_pg.mapped + PAGE_SIZE - blk_head, | |
| host->bounce_buf, blk_head); | |
| memcpy(host->pg.mapped, host->bounce_buf + blk_head, | |
| data->blksz - blk_head); | |
| } | |
| flush_dcache_page(page); | |
| kunmap(page); | |
| host->head_pg.page = NULL; | |
| if (!force && sg_dma_len(sg) + sg->offset > | |
| (host->page_idx << PAGE_SHIFT) + data->blksz - blk_head) | |
| /* More blocks in this SG, don't unmap the next page */ | |
| return; | |
| } | |
| page = host->pg.page; | |
| if (!page) | |
| return; | |
| flush_dcache_page(page); | |
| kunmap(page); | |
| host->pg.page = NULL; | |
| } | |
| /* Called from MMC_WRITE_MULTIPLE_BLOCK or MMC_READ_MULTIPLE_BLOCK */ | |
| static void usdhi6_sg_advance(struct usdhi6_host *host) | |
| { | |
| struct mmc_data *data = host->mrq->data; | |
| size_t done, total; | |
| /* New offset: set at the end of the previous block */ | |
| if (host->head_pg.page) { | |
| /* Finished a cross-page block, jump to the new page */ | |
| host->page_idx++; | |
| host->offset = data->blksz - host->head_len; | |
| host->blk_page = host->pg.mapped; | |
| usdhi6_sg_unmap(host, false); | |
| } else { | |
| host->offset += data->blksz; | |
| /* The completed block didn't cross a page boundary */ | |
| if (host->offset == PAGE_SIZE) { | |
| /* If required, we'll map the page below */ | |
| host->offset = 0; | |
| host->page_idx++; | |
| } | |
| } | |
| /* | |
| * Now host->blk_page + host->offset point at the end of our last block | |
| * and host->page_idx is the index of the page, in which our new block | |
| * is located, if any | |
| */ | |
| done = (host->page_idx << PAGE_SHIFT) + host->offset; | |
| total = host->sg->offset + sg_dma_len(host->sg); | |
| dev_dbg(mmc_dev(host->mmc), "%s(): %zu of %zu @ %zu\n", __func__, | |
| done, total, host->offset); | |
| if (done < total && host->offset) { | |
| /* More blocks in this page */ | |
| if (host->offset + data->blksz > PAGE_SIZE) | |
| /* We approached at a block, that spans 2 pages */ | |
| usdhi6_blk_bounce(host, host->sg); | |
| return; | |
| } | |
| /* Finished current page or an SG segment */ | |
| usdhi6_sg_unmap(host, false); | |
| if (done == total) { | |
| /* | |
| * End of an SG segment or the complete SG: jump to the next | |
| * segment, we'll map it later in usdhi6_blk_read() or | |
| * usdhi6_blk_write() | |
| */ | |
| struct scatterlist *next = sg_next(host->sg); | |
| host->page_idx = 0; | |
| if (!next) | |
| host->wait = USDHI6_WAIT_FOR_DATA_END; | |
| host->sg = next; | |
| if (WARN(next && sg_dma_len(next) % data->blksz, | |
| "SG size %u isn't a multiple of block size %u\n", | |
| sg_dma_len(next), data->blksz)) | |
| data->error = -EINVAL; | |
| return; | |
| } | |
| /* We cannot get here after crossing a page border */ | |
| /* Next page in the same SG */ | |
| host->pg.page = nth_page(sg_page(host->sg), host->page_idx); | |
| host->pg.mapped = kmap(host->pg.page); | |
| host->blk_page = host->pg.mapped; | |
| dev_dbg(mmc_dev(host->mmc), "Mapped %p (%lx) at %p for CMD%u @ 0x%p\n", | |
| host->pg.page, page_to_pfn(host->pg.page), host->pg.mapped, | |
| host->mrq->cmd->opcode, host->mrq); | |
| } | |
| /* DMA handling */ | |
| static void usdhi6_dma_release(struct usdhi6_host *host) | |
| { | |
| host->dma_active = false; | |
| if (host->chan_tx) { | |
| struct dma_chan *chan = host->chan_tx; | |
| host->chan_tx = NULL; | |
| dma_release_channel(chan); | |
| } | |
| if (host->chan_rx) { | |
| struct dma_chan *chan = host->chan_rx; | |
| host->chan_rx = NULL; | |
| dma_release_channel(chan); | |
| } | |
| } | |
| static void usdhi6_dma_stop_unmap(struct usdhi6_host *host) | |
| { | |
| struct mmc_data *data = host->mrq->data; | |
| if (!host->dma_active) | |
| return; | |
| usdhi6_write(host, USDHI6_CC_EXT_MODE, 0); | |
| host->dma_active = false; | |
| if (data->flags & MMC_DATA_READ) | |
| dma_unmap_sg(host->chan_rx->device->dev, data->sg, | |
| data->sg_len, DMA_FROM_DEVICE); | |
| else | |
| dma_unmap_sg(host->chan_tx->device->dev, data->sg, | |
| data->sg_len, DMA_TO_DEVICE); | |
| } | |
| static void usdhi6_dma_complete(void *arg) | |
| { | |
| struct usdhi6_host *host = arg; | |
| struct mmc_request *mrq = host->mrq; | |
| if (WARN(!mrq || !mrq->data, "%s: NULL data in DMA completion for %p!\n", | |
| dev_name(mmc_dev(host->mmc)), mrq)) | |
| return; | |
| dev_dbg(mmc_dev(host->mmc), "%s(): CMD%u DMA completed\n", __func__, | |
| mrq->cmd->opcode); | |
| usdhi6_dma_stop_unmap(host); | |
| usdhi6_wait_for_brwe(host, mrq->data->flags & MMC_DATA_READ); | |
| } | |
| static int usdhi6_dma_setup(struct usdhi6_host *host, struct dma_chan *chan, | |
| enum dma_transfer_direction dir) | |
| { | |
| struct mmc_data *data = host->mrq->data; | |
| struct scatterlist *sg = data->sg; | |
| struct dma_async_tx_descriptor *desc = NULL; | |
| dma_cookie_t cookie = -EINVAL; | |
| enum dma_data_direction data_dir; | |
| int ret; | |
| switch (dir) { | |
| case DMA_MEM_TO_DEV: | |
| data_dir = DMA_TO_DEVICE; | |
| break; | |
| case DMA_DEV_TO_MEM: | |
| data_dir = DMA_FROM_DEVICE; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| ret = dma_map_sg(chan->device->dev, sg, data->sg_len, data_dir); | |
| if (ret > 0) { | |
| host->dma_active = true; | |
| desc = dmaengine_prep_slave_sg(chan, sg, ret, dir, | |
| DMA_PREP_INTERRUPT | DMA_CTRL_ACK); | |
| } | |
| if (desc) { | |
| desc->callback = usdhi6_dma_complete; | |
| desc->callback_param = host; | |
| cookie = dmaengine_submit(desc); | |
| } | |
| dev_dbg(mmc_dev(host->mmc), "%s(): mapped %d -> %d, cookie %d @ %p\n", | |
| __func__, data->sg_len, ret, cookie, desc); | |
| if (cookie < 0) { | |
| /* DMA failed, fall back to PIO */ | |
| if (ret >= 0) | |
| ret = cookie; | |
| usdhi6_dma_release(host); | |
| dev_warn(mmc_dev(host->mmc), | |
| "DMA failed: %d, falling back to PIO\n", ret); | |
| } | |
| return cookie; | |
| } | |
| static int usdhi6_dma_start(struct usdhi6_host *host) | |
| { | |
| if (!host->chan_rx || !host->chan_tx) | |
| return -ENODEV; | |
| if (host->mrq->data->flags & MMC_DATA_READ) | |
| return usdhi6_dma_setup(host, host->chan_rx, DMA_DEV_TO_MEM); | |
| return usdhi6_dma_setup(host, host->chan_tx, DMA_MEM_TO_DEV); | |
| } | |
| static void usdhi6_dma_kill(struct usdhi6_host *host) | |
| { | |
| struct mmc_data *data = host->mrq->data; | |
| dev_dbg(mmc_dev(host->mmc), "%s(): SG of %u: %ux%u\n", | |
| __func__, data->sg_len, data->blocks, data->blksz); | |
| /* Abort DMA */ | |
| if (data->flags & MMC_DATA_READ) | |
| dmaengine_terminate_all(host->chan_rx); | |
| else | |
| dmaengine_terminate_all(host->chan_tx); | |
| } | |
| static void usdhi6_dma_check_error(struct usdhi6_host *host) | |
| { | |
| struct mmc_data *data = host->mrq->data; | |
| dev_dbg(mmc_dev(host->mmc), "%s(): IO error %d, status 0x%x\n", | |
| __func__, host->io_error, usdhi6_read(host, USDHI6_SD_INFO1)); | |
| if (host->io_error) { | |
| data->error = usdhi6_error_code(host); | |
| data->bytes_xfered = 0; | |
| usdhi6_dma_kill(host); | |
| usdhi6_dma_release(host); | |
| dev_warn(mmc_dev(host->mmc), | |
| "DMA failed: %d, falling back to PIO\n", data->error); | |
| return; | |
| } | |
| /* | |
| * The datasheet tells us to check a response from the card, whereas | |
| * responses only come after the command phase, not after the data | |
| * phase. Let's check anyway. | |
| */ | |
| if (host->irq_status & USDHI6_SD_INFO1_RSP_END) | |
| dev_warn(mmc_dev(host->mmc), "Unexpected response received!\n"); | |
| } | |
| static void usdhi6_dma_kick(struct usdhi6_host *host) | |
| { | |
| if (host->mrq->data->flags & MMC_DATA_READ) | |
| dma_async_issue_pending(host->chan_rx); | |
| else | |
| dma_async_issue_pending(host->chan_tx); | |
| } | |
| static void usdhi6_dma_request(struct usdhi6_host *host, phys_addr_t start) | |
| { | |
| struct dma_slave_config cfg = { | |
| .src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, | |
| .dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, | |
| }; | |
| int ret; | |
| host->chan_tx = dma_request_slave_channel(mmc_dev(host->mmc), "tx"); | |
| dev_dbg(mmc_dev(host->mmc), "%s: TX: got channel %p\n", __func__, | |
| host->chan_tx); | |
| if (!host->chan_tx) | |
| return; | |
| cfg.direction = DMA_MEM_TO_DEV; | |
| cfg.dst_addr = start + USDHI6_SD_BUF0; | |
| cfg.dst_maxburst = 128; /* 128 words * 4 bytes = 512 bytes */ | |
| cfg.src_addr = 0; | |
| ret = dmaengine_slave_config(host->chan_tx, &cfg); | |
| if (ret < 0) | |
| goto e_release_tx; | |
| host->chan_rx = dma_request_slave_channel(mmc_dev(host->mmc), "rx"); | |
| dev_dbg(mmc_dev(host->mmc), "%s: RX: got channel %p\n", __func__, | |
| host->chan_rx); | |
| if (!host->chan_rx) | |
| goto e_release_tx; | |
| cfg.direction = DMA_DEV_TO_MEM; | |
| cfg.src_addr = cfg.dst_addr; | |
| cfg.src_maxburst = 128; /* 128 words * 4 bytes = 512 bytes */ | |
| cfg.dst_addr = 0; | |
| ret = dmaengine_slave_config(host->chan_rx, &cfg); | |
| if (ret < 0) | |
| goto e_release_rx; | |
| return; | |
| e_release_rx: | |
| dma_release_channel(host->chan_rx); | |
| host->chan_rx = NULL; | |
| e_release_tx: | |
| dma_release_channel(host->chan_tx); | |
| host->chan_tx = NULL; | |
| } | |
| /* API helpers */ | |
| static void usdhi6_clk_set(struct usdhi6_host *host, struct mmc_ios *ios) | |
| { | |
| unsigned long rate = ios->clock; | |
| u32 val; | |
| unsigned int i; | |
| for (i = 1000; i; i--) { | |
| if (usdhi6_read(host, USDHI6_SD_INFO2) & USDHI6_SD_INFO2_SCLKDIVEN) | |
| break; | |
| usleep_range(10, 100); | |
| } | |
| if (!i) { | |
| dev_err(mmc_dev(host->mmc), "SD bus busy, clock set aborted\n"); | |
| return; | |
| } | |
| val = usdhi6_read(host, USDHI6_SD_CLK_CTRL) & ~USDHI6_SD_CLK_CTRL_DIV_MASK; | |
| if (rate) { | |
| unsigned long new_rate; | |
| if (host->imclk <= rate) { | |
| if (ios->timing != MMC_TIMING_UHS_DDR50) { | |
| /* Cannot have 1-to-1 clock in DDR mode */ | |
| new_rate = host->imclk; | |
| val |= 0xff; | |
| } else { | |
| new_rate = host->imclk / 2; | |
| } | |
| } else { | |
| unsigned long div = | |
| roundup_pow_of_two(DIV_ROUND_UP(host->imclk, rate)); | |
| val |= div >> 2; | |
| new_rate = host->imclk / div; | |
| } | |
| if (host->rate == new_rate) | |
| return; | |
| host->rate = new_rate; | |
| dev_dbg(mmc_dev(host->mmc), "target %lu, div %u, set %lu\n", | |
| rate, (val & 0xff) << 2, new_rate); | |
| } | |
| /* | |
| * if old or new rate is equal to input rate, have to switch the clock | |
| * off before changing and on after | |
| */ | |
| if (host->imclk == rate || host->imclk == host->rate || !rate) | |
| usdhi6_write(host, USDHI6_SD_CLK_CTRL, | |
| val & ~USDHI6_SD_CLK_CTRL_SCLKEN); | |
| if (!rate) { | |
| host->rate = 0; | |
| return; | |
| } | |
| usdhi6_write(host, USDHI6_SD_CLK_CTRL, val); | |
| if (host->imclk == rate || host->imclk == host->rate || | |
| !(val & USDHI6_SD_CLK_CTRL_SCLKEN)) | |
| usdhi6_write(host, USDHI6_SD_CLK_CTRL, | |
| val | USDHI6_SD_CLK_CTRL_SCLKEN); | |
| } | |
| static void usdhi6_set_power(struct usdhi6_host *host, struct mmc_ios *ios) | |
| { | |
| struct mmc_host *mmc = host->mmc; | |
| if (!IS_ERR(mmc->supply.vmmc)) | |
| /* Errors ignored... */ | |
| mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, | |
| ios->power_mode ? ios->vdd : 0); | |
| } | |
| static int usdhi6_reset(struct usdhi6_host *host) | |
| { | |
| int i; | |
| usdhi6_write(host, USDHI6_SOFT_RST, USDHI6_SOFT_RST_RESERVED); | |
| cpu_relax(); | |
| usdhi6_write(host, USDHI6_SOFT_RST, USDHI6_SOFT_RST_RESERVED | USDHI6_SOFT_RST_RESET); | |
| for (i = 1000; i; i--) | |
| if (usdhi6_read(host, USDHI6_SOFT_RST) & USDHI6_SOFT_RST_RESET) | |
| break; | |
| return i ? 0 : -ETIMEDOUT; | |
| } | |
| static void usdhi6_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) | |
| { | |
| struct usdhi6_host *host = mmc_priv(mmc); | |
| u32 option, mode; | |
| int ret; | |
| dev_dbg(mmc_dev(mmc), "%uHz, OCR: %u, power %u, bus-width %u, timing %u\n", | |
| ios->clock, ios->vdd, ios->power_mode, ios->bus_width, ios->timing); | |
| switch (ios->power_mode) { | |
| case MMC_POWER_OFF: | |
| usdhi6_set_power(host, ios); | |
| usdhi6_only_cd(host); | |
| break; | |
| case MMC_POWER_UP: | |
| /* | |
| * We only also touch USDHI6_SD_OPTION from .request(), which | |
| * cannot race with MMC_POWER_UP | |
| */ | |
| ret = usdhi6_reset(host); | |
| if (ret < 0) { | |
| dev_err(mmc_dev(mmc), "Cannot reset the interface!\n"); | |
| } else { | |
| usdhi6_set_power(host, ios); | |
| usdhi6_only_cd(host); | |
| } | |
| break; | |
| case MMC_POWER_ON: | |
| option = usdhi6_read(host, USDHI6_SD_OPTION); | |
| /* | |
| * The eMMC standard only allows 4 or 8 bits in the DDR mode, | |
| * the same probably holds for SD cards. We check here anyway, | |
| * since the datasheet explicitly requires 4 bits for DDR. | |
| */ | |
| if (ios->bus_width == MMC_BUS_WIDTH_1) { | |
| if (ios->timing == MMC_TIMING_UHS_DDR50) | |
| dev_err(mmc_dev(mmc), | |
| "4 bits are required for DDR\n"); | |
| option |= USDHI6_SD_OPTION_WIDTH_1; | |
| mode = 0; | |
| } else { | |
| option &= ~USDHI6_SD_OPTION_WIDTH_1; | |
| mode = ios->timing == MMC_TIMING_UHS_DDR50; | |
| } | |
| usdhi6_write(host, USDHI6_SD_OPTION, option); | |
| usdhi6_write(host, USDHI6_SDIF_MODE, mode); | |
| break; | |
| } | |
| if (host->rate != ios->clock) | |
| usdhi6_clk_set(host, ios); | |
| } | |
| /* This is data timeout. Response timeout is fixed to 640 clock cycles */ | |
| static void usdhi6_timeout_set(struct usdhi6_host *host) | |
| { | |
| struct mmc_request *mrq = host->mrq; | |
| u32 val; | |
| unsigned long ticks; | |
| if (!mrq->data) | |
| ticks = host->rate / 1000 * mrq->cmd->busy_timeout; | |
| else | |
| ticks = host->rate / 1000000 * (mrq->data->timeout_ns / 1000) + | |
| mrq->data->timeout_clks; | |
| if (!ticks || ticks > 1 << 27) | |
| /* Max timeout */ | |
| val = 14; | |
| else if (ticks < 1 << 13) | |
| /* Min timeout */ | |
| val = 0; | |
| else | |
| val = order_base_2(ticks) - 13; | |
| dev_dbg(mmc_dev(host->mmc), "Set %s timeout %lu ticks @ %lu Hz\n", | |
| mrq->data ? "data" : "cmd", ticks, host->rate); | |
| /* Timeout Counter mask: 0xf0 */ | |
| usdhi6_write(host, USDHI6_SD_OPTION, (val << USDHI6_SD_OPTION_TIMEOUT_SHIFT) | | |
| (usdhi6_read(host, USDHI6_SD_OPTION) & ~USDHI6_SD_OPTION_TIMEOUT_MASK)); | |
| } | |
| static void usdhi6_request_done(struct usdhi6_host *host) | |
| { | |
| struct mmc_request *mrq = host->mrq; | |
| struct mmc_data *data = mrq->data; | |
| if (WARN(host->pg.page || host->head_pg.page, | |
| "Page %p or %p not unmapped: wait %u, CMD%d(%c) @ +0x%zx %ux%u in SG%u!\n", | |
| host->pg.page, host->head_pg.page, host->wait, mrq->cmd->opcode, | |
| data ? (data->flags & MMC_DATA_READ ? 'R' : 'W') : '-', | |
| data ? host->offset : 0, data ? data->blocks : 0, | |
| data ? data->blksz : 0, data ? data->sg_len : 0)) | |
| usdhi6_sg_unmap(host, true); | |
| if (mrq->cmd->error || | |
| (data && data->error) || | |
| (mrq->stop && mrq->stop->error)) | |
| dev_dbg(mmc_dev(host->mmc), "%s(CMD%d: %ux%u): err %d %d %d\n", | |
| __func__, mrq->cmd->opcode, data ? data->blocks : 0, | |
| data ? data->blksz : 0, | |
| mrq->cmd->error, | |
| data ? data->error : 1, | |
| mrq->stop ? mrq->stop->error : 1); | |
| /* Disable DMA */ | |
| usdhi6_write(host, USDHI6_CC_EXT_MODE, 0); | |
| host->wait = USDHI6_WAIT_FOR_REQUEST; | |
| host->mrq = NULL; | |
| mmc_request_done(host->mmc, mrq); | |
| } | |
| static int usdhi6_cmd_flags(struct usdhi6_host *host) | |
| { | |
| struct mmc_request *mrq = host->mrq; | |
| struct mmc_command *cmd = mrq->cmd; | |
| u16 opc = cmd->opcode; | |
| if (host->app_cmd) { | |
| host->app_cmd = false; | |
| opc |= USDHI6_SD_CMD_APP; | |
| } | |
| if (mrq->data) { | |
| opc |= USDHI6_SD_CMD_DATA; | |
| if (mrq->data->flags & MMC_DATA_READ) | |
| opc |= USDHI6_SD_CMD_READ; | |
| if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK || | |
| cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK || | |
| (cmd->opcode == SD_IO_RW_EXTENDED && | |
| mrq->data->blocks > 1)) { | |
| opc |= USDHI6_SD_CMD_MULTI; | |
| if (!mrq->stop) | |
| opc |= USDHI6_SD_CMD_CMD12_AUTO_OFF; | |
| } | |
| switch (mmc_resp_type(cmd)) { | |
| case MMC_RSP_NONE: | |
| opc |= USDHI6_SD_CMD_MODE_RSP_NONE; | |
| break; | |
| case MMC_RSP_R1: | |
| opc |= USDHI6_SD_CMD_MODE_RSP_R1; | |
| break; | |
| case MMC_RSP_R1B: | |
| opc |= USDHI6_SD_CMD_MODE_RSP_R1B; | |
| break; | |
| case MMC_RSP_R2: | |
| opc |= USDHI6_SD_CMD_MODE_RSP_R2; | |
| break; | |
| case MMC_RSP_R3: | |
| opc |= USDHI6_SD_CMD_MODE_RSP_R3; | |
| break; | |
| default: | |
| dev_warn(mmc_dev(host->mmc), | |
| "Unknown response type %d\n", | |
| mmc_resp_type(cmd)); | |
| return -EINVAL; | |
| } | |
| } | |
| return opc; | |
| } | |
| static int usdhi6_rq_start(struct usdhi6_host *host) | |
| { | |
| struct mmc_request *mrq = host->mrq; | |
| struct mmc_command *cmd = mrq->cmd; | |
| struct mmc_data *data = mrq->data; | |
| int opc = usdhi6_cmd_flags(host); | |
| int i; | |
| if (opc < 0) | |
| return opc; | |
| for (i = 1000; i; i--) { | |
| if (!(usdhi6_read(host, USDHI6_SD_INFO2) & USDHI6_SD_INFO2_CBSY)) | |
| break; | |
| usleep_range(10, 100); | |
| } | |
| if (!i) { | |
| dev_dbg(mmc_dev(host->mmc), "Command active, request aborted\n"); | |
| return -EAGAIN; | |
| } | |
| if (data) { | |
| bool use_dma; | |
| int ret = 0; | |
| host->page_idx = 0; | |
| if (cmd->opcode == SD_IO_RW_EXTENDED && data->blocks > 1) { | |
| switch (data->blksz) { | |
| case 512: | |
| break; | |
| case 32: | |
| case 64: | |
| case 128: | |
| case 256: | |
| if (mrq->stop) | |
| ret = -EINVAL; | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| } | |
| } else if ((cmd->opcode == MMC_READ_MULTIPLE_BLOCK || | |
| cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK) && | |
| data->blksz != 512) { | |
| ret = -EINVAL; | |
| } | |
| if (ret < 0) { | |
| dev_warn(mmc_dev(host->mmc), "%s(): %u blocks of %u bytes\n", | |
| __func__, data->blocks, data->blksz); | |
| return -EINVAL; | |
| } | |
| if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK || | |
| cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK || | |
| (cmd->opcode == SD_IO_RW_EXTENDED && | |
| data->blocks > 1)) | |
| usdhi6_sg_prep(host); | |
| usdhi6_write(host, USDHI6_SD_SIZE, data->blksz); | |
| if ((data->blksz >= USDHI6_MIN_DMA || | |
| data->blocks > 1) && | |
| (data->blksz % 4 || | |
| data->sg->offset % 4)) | |
| dev_dbg(mmc_dev(host->mmc), | |
| "Bad SG of %u: %ux%u @ %u\n", data->sg_len, | |
| data->blksz, data->blocks, data->sg->offset); | |
| /* Enable DMA for USDHI6_MIN_DMA bytes or more */ | |
| use_dma = data->blksz >= USDHI6_MIN_DMA && | |
| !(data->blksz % 4) && | |
| usdhi6_dma_start(host) >= DMA_MIN_COOKIE; | |
| if (use_dma) | |
| usdhi6_write(host, USDHI6_CC_EXT_MODE, USDHI6_CC_EXT_MODE_SDRW); | |
| dev_dbg(mmc_dev(host->mmc), | |
| "%s(): request opcode %u, %u blocks of %u bytes in %u segments, %s %s @+0x%x%s\n", | |
| __func__, cmd->opcode, data->blocks, data->blksz, | |
| data->sg_len, use_dma ? "DMA" : "PIO", | |
| data->flags & MMC_DATA_READ ? "read" : "write", | |
| data->sg->offset, mrq->stop ? " + stop" : ""); | |
| } else { | |
| dev_dbg(mmc_dev(host->mmc), "%s(): request opcode %u\n", | |
| __func__, cmd->opcode); | |
| } | |
| /* We have to get a command completion interrupt with DMA too */ | |
| usdhi6_wait_for_resp(host); | |
| host->wait = USDHI6_WAIT_FOR_CMD; | |
| schedule_delayed_work(&host->timeout_work, host->timeout); | |
| /* SEC bit is required to enable block counting by the core */ | |
| usdhi6_write(host, USDHI6_SD_STOP, | |
| data && data->blocks > 1 ? USDHI6_SD_STOP_SEC : 0); | |
| usdhi6_write(host, USDHI6_SD_ARG, cmd->arg); | |
| /* Kick command execution */ | |
| usdhi6_write(host, USDHI6_SD_CMD, opc); | |
| return 0; | |
| } | |
| static void usdhi6_request(struct mmc_host *mmc, struct mmc_request *mrq) | |
| { | |
| struct usdhi6_host *host = mmc_priv(mmc); | |
| int ret; | |
| cancel_delayed_work_sync(&host->timeout_work); | |
| host->mrq = mrq; | |
| host->sg = NULL; | |
| usdhi6_timeout_set(host); | |
| ret = usdhi6_rq_start(host); | |
| if (ret < 0) { | |
| mrq->cmd->error = ret; | |
| usdhi6_request_done(host); | |
| } | |
| } | |
| static int usdhi6_get_cd(struct mmc_host *mmc) | |
| { | |
| struct usdhi6_host *host = mmc_priv(mmc); | |
| /* Read is atomic, no need to lock */ | |
| u32 status = usdhi6_read(host, USDHI6_SD_INFO1) & USDHI6_SD_INFO1_CD; | |
| /* | |
| * level status.CD CD_ACTIVE_HIGH card present | |
| * 1 0 0 0 | |
| * 1 0 1 1 | |
| * 0 1 0 1 | |
| * 0 1 1 0 | |
| */ | |
| return !status ^ !(mmc->caps2 & MMC_CAP2_CD_ACTIVE_HIGH); | |
| } | |
| static int usdhi6_get_ro(struct mmc_host *mmc) | |
| { | |
| struct usdhi6_host *host = mmc_priv(mmc); | |
| /* No locking as above */ | |
| u32 status = usdhi6_read(host, USDHI6_SD_INFO1) & USDHI6_SD_INFO1_WP; | |
| /* | |
| * level status.WP RO_ACTIVE_HIGH card read-only | |
| * 1 0 0 0 | |
| * 1 0 1 1 | |
| * 0 1 0 1 | |
| * 0 1 1 0 | |
| */ | |
| return !status ^ !(mmc->caps2 & MMC_CAP2_RO_ACTIVE_HIGH); | |
| } | |
| static void usdhi6_enable_sdio_irq(struct mmc_host *mmc, int enable) | |
| { | |
| struct usdhi6_host *host = mmc_priv(mmc); | |
| dev_dbg(mmc_dev(mmc), "%s(): %sable\n", __func__, enable ? "en" : "dis"); | |
| if (enable) { | |
| host->sdio_mask = USDHI6_SDIO_INFO1_IRQ & ~USDHI6_SDIO_INFO1_IOIRQ; | |
| usdhi6_write(host, USDHI6_SDIO_INFO1_MASK, host->sdio_mask); | |
| usdhi6_write(host, USDHI6_SDIO_MODE, 1); | |
| } else { | |
| usdhi6_write(host, USDHI6_SDIO_MODE, 0); | |
| usdhi6_write(host, USDHI6_SDIO_INFO1_MASK, USDHI6_SDIO_INFO1_IRQ); | |
| host->sdio_mask = USDHI6_SDIO_INFO1_IRQ; | |
| } | |
| } | |
| static int usdhi6_set_pinstates(struct usdhi6_host *host, int voltage) | |
| { | |
| if (IS_ERR(host->pins_uhs)) | |
| return 0; | |
| switch (voltage) { | |
| case MMC_SIGNAL_VOLTAGE_180: | |
| case MMC_SIGNAL_VOLTAGE_120: | |
| return pinctrl_select_state(host->pinctrl, | |
| host->pins_uhs); | |
| default: | |
| return pinctrl_select_state(host->pinctrl, | |
| host->pins_default); | |
| } | |
| } | |
| static int usdhi6_sig_volt_switch(struct mmc_host *mmc, struct mmc_ios *ios) | |
| { | |
| int ret; | |
| ret = mmc_regulator_set_vqmmc(mmc, ios); | |
| if (ret < 0) | |
| return ret; | |
| ret = usdhi6_set_pinstates(mmc_priv(mmc), ios->signal_voltage); | |
| if (ret) | |
| dev_warn_once(mmc_dev(mmc), | |
| "Failed to set pinstate err=%d\n", ret); | |
| return ret; | |
| } | |
| static struct mmc_host_ops usdhi6_ops = { | |
| .request = usdhi6_request, | |
| .set_ios = usdhi6_set_ios, | |
| .get_cd = usdhi6_get_cd, | |
| .get_ro = usdhi6_get_ro, | |
| .enable_sdio_irq = usdhi6_enable_sdio_irq, | |
| .start_signal_voltage_switch = usdhi6_sig_volt_switch, | |
| }; | |
| /* State machine handlers */ | |
| static void usdhi6_resp_cmd12(struct usdhi6_host *host) | |
| { | |
| struct mmc_command *cmd = host->mrq->stop; | |
| cmd->resp[0] = usdhi6_read(host, USDHI6_SD_RSP10); | |
| } | |
| static void usdhi6_resp_read(struct usdhi6_host *host) | |
| { | |
| struct mmc_command *cmd = host->mrq->cmd; | |
| u32 *rsp = cmd->resp, tmp = 0; | |
| int i; | |
| /* | |
| * RSP10 39-8 | |
| * RSP32 71-40 | |
| * RSP54 103-72 | |
| * RSP76 127-104 | |
| * R2-type response: | |
| * resp[0] = r[127..96] | |
| * resp[1] = r[95..64] | |
| * resp[2] = r[63..32] | |
| * resp[3] = r[31..0] | |
| * Other responses: | |
| * resp[0] = r[39..8] | |
| */ | |
| if (mmc_resp_type(cmd) == MMC_RSP_NONE) | |
| return; | |
| if (!(host->irq_status & USDHI6_SD_INFO1_RSP_END)) { | |
| dev_err(mmc_dev(host->mmc), | |
| "CMD%d: response expected but is missing!\n", cmd->opcode); | |
| return; | |
| } | |
| if (mmc_resp_type(cmd) & MMC_RSP_136) | |
| for (i = 0; i < 4; i++) { | |
| if (i) | |
| rsp[3 - i] = tmp >> 24; | |
| tmp = usdhi6_read(host, USDHI6_SD_RSP10 + i * 8); | |
| rsp[3 - i] |= tmp << 8; | |
| } | |
| else if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK || | |
| cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK) | |
| /* Read RSP54 to avoid conflict with auto CMD12 */ | |
| rsp[0] = usdhi6_read(host, USDHI6_SD_RSP54); | |
| else | |
| rsp[0] = usdhi6_read(host, USDHI6_SD_RSP10); | |
| dev_dbg(mmc_dev(host->mmc), "Response 0x%x\n", rsp[0]); | |
| } | |
| static int usdhi6_blk_read(struct usdhi6_host *host) | |
| { | |
| struct mmc_data *data = host->mrq->data; | |
| u32 *p; | |
| int i, rest; | |
| if (host->io_error) { | |
| data->error = usdhi6_error_code(host); | |
| goto error; | |
| } | |
| if (host->pg.page) { | |
| p = host->blk_page + host->offset; | |
| } else { | |
| p = usdhi6_sg_map(host); | |
| if (!p) { | |
| data->error = -ENOMEM; | |
| goto error; | |
| } | |
| } | |
| for (i = 0; i < data->blksz / 4; i++, p++) | |
| *p = usdhi6_read(host, USDHI6_SD_BUF0); | |
| rest = data->blksz % 4; | |
| for (i = 0; i < (rest + 1) / 2; i++) { | |
| u16 d = usdhi6_read16(host, USDHI6_SD_BUF0); | |
| ((u8 *)p)[2 * i] = ((u8 *)&d)[0]; | |
| if (rest > 1 && !i) | |
| ((u8 *)p)[2 * i + 1] = ((u8 *)&d)[1]; | |
| } | |
| return 0; | |
| error: | |
| dev_dbg(mmc_dev(host->mmc), "%s(): %d\n", __func__, data->error); | |
| host->wait = USDHI6_WAIT_FOR_REQUEST; | |
| return data->error; | |
| } | |
| static int usdhi6_blk_write(struct usdhi6_host *host) | |
| { | |
| struct mmc_data *data = host->mrq->data; | |
| u32 *p; | |
| int i, rest; | |
| if (host->io_error) { | |
| data->error = usdhi6_error_code(host); | |
| goto error; | |
| } | |
| if (host->pg.page) { | |
| p = host->blk_page + host->offset; | |
| } else { | |
| p = usdhi6_sg_map(host); | |
| if (!p) { | |
| data->error = -ENOMEM; | |
| goto error; | |
| } | |
| } | |
| for (i = 0; i < data->blksz / 4; i++, p++) | |
| usdhi6_write(host, USDHI6_SD_BUF0, *p); | |
| rest = data->blksz % 4; | |
| for (i = 0; i < (rest + 1) / 2; i++) { | |
| u16 d; | |
| ((u8 *)&d)[0] = ((u8 *)p)[2 * i]; | |
| if (rest > 1 && !i) | |
| ((u8 *)&d)[1] = ((u8 *)p)[2 * i + 1]; | |
| else | |
| ((u8 *)&d)[1] = 0; | |
| usdhi6_write16(host, USDHI6_SD_BUF0, d); | |
| } | |
| return 0; | |
| error: | |
| dev_dbg(mmc_dev(host->mmc), "%s(): %d\n", __func__, data->error); | |
| host->wait = USDHI6_WAIT_FOR_REQUEST; | |
| return data->error; | |
| } | |
| static int usdhi6_stop_cmd(struct usdhi6_host *host) | |
| { | |
| struct mmc_request *mrq = host->mrq; | |
| switch (mrq->cmd->opcode) { | |
| case MMC_READ_MULTIPLE_BLOCK: | |
| case MMC_WRITE_MULTIPLE_BLOCK: | |
| if (mrq->stop->opcode == MMC_STOP_TRANSMISSION) { | |
| host->wait = USDHI6_WAIT_FOR_STOP; | |
| return 0; | |
| } | |
| /* Unsupported STOP command */ | |
| default: | |
| dev_err(mmc_dev(host->mmc), | |
| "unsupported stop CMD%d for CMD%d\n", | |
| mrq->stop->opcode, mrq->cmd->opcode); | |
| mrq->stop->error = -EOPNOTSUPP; | |
| } | |
| return -EOPNOTSUPP; | |
| } | |
| static bool usdhi6_end_cmd(struct usdhi6_host *host) | |
| { | |
| struct mmc_request *mrq = host->mrq; | |
| struct mmc_command *cmd = mrq->cmd; | |
| if (host->io_error) { | |
| cmd->error = usdhi6_error_code(host); | |
| return false; | |
| } | |
| usdhi6_resp_read(host); | |
| if (!mrq->data) | |
| return false; | |
| if (host->dma_active) { | |
| usdhi6_dma_kick(host); | |
| if (!mrq->stop) | |
| host->wait = USDHI6_WAIT_FOR_DMA; | |
| else if (usdhi6_stop_cmd(host) < 0) | |
| return false; | |
| } else if (mrq->data->flags & MMC_DATA_READ) { | |
| if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK || | |
| (cmd->opcode == SD_IO_RW_EXTENDED && | |
| mrq->data->blocks > 1)) | |
| host->wait = USDHI6_WAIT_FOR_MREAD; | |
| else | |
| host->wait = USDHI6_WAIT_FOR_READ; | |
| } else { | |
| if (cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK || | |
| (cmd->opcode == SD_IO_RW_EXTENDED && | |
| mrq->data->blocks > 1)) | |
| host->wait = USDHI6_WAIT_FOR_MWRITE; | |
| else | |
| host->wait = USDHI6_WAIT_FOR_WRITE; | |
| } | |
| return true; | |
| } | |
| static bool usdhi6_read_block(struct usdhi6_host *host) | |
| { | |
| /* ACCESS_END IRQ is already unmasked */ | |
| int ret = usdhi6_blk_read(host); | |
| /* | |
| * Have to force unmapping both pages: the single block could have been | |
| * cross-page, in which case for single-block IO host->page_idx == 0. | |
| * So, if we don't force, the second page won't be unmapped. | |
| */ | |
| usdhi6_sg_unmap(host, true); | |
| if (ret < 0) | |
| return false; | |
| host->wait = USDHI6_WAIT_FOR_DATA_END; | |
| return true; | |
| } | |
| static bool usdhi6_mread_block(struct usdhi6_host *host) | |
| { | |
| int ret = usdhi6_blk_read(host); | |
| if (ret < 0) | |
| return false; | |
| usdhi6_sg_advance(host); | |
| return !host->mrq->data->error && | |
| (host->wait != USDHI6_WAIT_FOR_DATA_END || !host->mrq->stop); | |
| } | |
| static bool usdhi6_write_block(struct usdhi6_host *host) | |
| { | |
| int ret = usdhi6_blk_write(host); | |
| /* See comment in usdhi6_read_block() */ | |
| usdhi6_sg_unmap(host, true); | |
| if (ret < 0) | |
| return false; | |
| host->wait = USDHI6_WAIT_FOR_DATA_END; | |
| return true; | |
| } | |
| static bool usdhi6_mwrite_block(struct usdhi6_host *host) | |
| { | |
| int ret = usdhi6_blk_write(host); | |
| if (ret < 0) | |
| return false; | |
| usdhi6_sg_advance(host); | |
| return !host->mrq->data->error && | |
| (host->wait != USDHI6_WAIT_FOR_DATA_END || !host->mrq->stop); | |
| } | |
| /* Interrupt & timeout handlers */ | |
| static irqreturn_t usdhi6_sd_bh(int irq, void *dev_id) | |
| { | |
| struct usdhi6_host *host = dev_id; | |
| struct mmc_request *mrq; | |
| struct mmc_command *cmd; | |
| struct mmc_data *data; | |
| bool io_wait = false; | |
| cancel_delayed_work_sync(&host->timeout_work); | |
| mrq = host->mrq; | |
| if (!mrq) | |
| return IRQ_HANDLED; | |
| cmd = mrq->cmd; | |
| data = mrq->data; | |
| switch (host->wait) { | |
| case USDHI6_WAIT_FOR_REQUEST: | |
| /* We're too late, the timeout has already kicked in */ | |
| return IRQ_HANDLED; | |
| case USDHI6_WAIT_FOR_CMD: | |
| /* Wait for data? */ | |
| io_wait = usdhi6_end_cmd(host); | |
| break; | |
| case USDHI6_WAIT_FOR_MREAD: | |
| /* Wait for more data? */ | |
| io_wait = usdhi6_mread_block(host); | |
| break; | |
| case USDHI6_WAIT_FOR_READ: | |
| /* Wait for data end? */ | |
| io_wait = usdhi6_read_block(host); | |
| break; | |
| case USDHI6_WAIT_FOR_MWRITE: | |
| /* Wait data to write? */ | |
| io_wait = usdhi6_mwrite_block(host); | |
| break; | |
| case USDHI6_WAIT_FOR_WRITE: | |
| /* Wait for data end? */ | |
| io_wait = usdhi6_write_block(host); | |
| break; | |
| case USDHI6_WAIT_FOR_DMA: | |
| usdhi6_dma_check_error(host); | |
| break; | |
| case USDHI6_WAIT_FOR_STOP: | |
| usdhi6_write(host, USDHI6_SD_STOP, 0); | |
| if (host->io_error) { | |
| int ret = usdhi6_error_code(host); | |
| if (mrq->stop) | |
| mrq->stop->error = ret; | |
| else | |
| mrq->data->error = ret; | |
| dev_warn(mmc_dev(host->mmc), "%s(): %d\n", __func__, ret); | |
| break; | |
| } | |
| usdhi6_resp_cmd12(host); | |
| mrq->stop->error = 0; | |
| break; | |
| case USDHI6_WAIT_FOR_DATA_END: | |
| if (host->io_error) { | |
| mrq->data->error = usdhi6_error_code(host); | |
| dev_warn(mmc_dev(host->mmc), "%s(): %d\n", __func__, | |
| mrq->data->error); | |
| } | |
| break; | |
| default: | |
| cmd->error = -EFAULT; | |
| dev_err(mmc_dev(host->mmc), "Invalid state %u\n", host->wait); | |
| usdhi6_request_done(host); | |
| return IRQ_HANDLED; | |
| } | |
| if (io_wait) { | |
| schedule_delayed_work(&host->timeout_work, host->timeout); | |
| /* Wait for more data or ACCESS_END */ | |
| if (!host->dma_active) | |
| usdhi6_wait_for_brwe(host, mrq->data->flags & MMC_DATA_READ); | |
| return IRQ_HANDLED; | |
| } | |
| if (!cmd->error) { | |
| if (data) { | |
| if (!data->error) { | |
| if (host->wait != USDHI6_WAIT_FOR_STOP && | |
| host->mrq->stop && | |
| !host->mrq->stop->error && | |
| !usdhi6_stop_cmd(host)) { | |
| /* Sending STOP */ | |
| usdhi6_wait_for_resp(host); | |
| schedule_delayed_work(&host->timeout_work, | |
| host->timeout); | |
| return IRQ_HANDLED; | |
| } | |
| data->bytes_xfered = data->blocks * data->blksz; | |
| } else { | |
| /* Data error: might need to unmap the last page */ | |
| dev_warn(mmc_dev(host->mmc), "%s(): data error %d\n", | |
| __func__, data->error); | |
| usdhi6_sg_unmap(host, true); | |
| } | |
| } else if (cmd->opcode == MMC_APP_CMD) { | |
| host->app_cmd = true; | |
| } | |
| } | |
| usdhi6_request_done(host); | |
| return IRQ_HANDLED; | |
| } | |
| static irqreturn_t usdhi6_sd(int irq, void *dev_id) | |
| { | |
| struct usdhi6_host *host = dev_id; | |
| u16 status, status2, error; | |
| status = usdhi6_read(host, USDHI6_SD_INFO1) & ~host->status_mask & | |
| ~USDHI6_SD_INFO1_CARD; | |
| status2 = usdhi6_read(host, USDHI6_SD_INFO2) & ~host->status2_mask; | |
| usdhi6_only_cd(host); | |
| dev_dbg(mmc_dev(host->mmc), | |
| "IRQ status = 0x%08x, status2 = 0x%08x\n", status, status2); | |
| if (!status && !status2) | |
| return IRQ_NONE; | |
| error = status2 & USDHI6_SD_INFO2_ERR; | |
| /* Ack / clear interrupts */ | |
| if (USDHI6_SD_INFO1_IRQ & status) | |
| usdhi6_write(host, USDHI6_SD_INFO1, | |
| 0xffff & ~(USDHI6_SD_INFO1_IRQ & status)); | |
| if (USDHI6_SD_INFO2_IRQ & status2) { | |
| if (error) | |
| /* In error cases BWE and BRE aren't cleared automatically */ | |
| status2 |= USDHI6_SD_INFO2_BWE | USDHI6_SD_INFO2_BRE; | |
| usdhi6_write(host, USDHI6_SD_INFO2, | |
| 0xffff & ~(USDHI6_SD_INFO2_IRQ & status2)); | |
| } | |
| host->io_error = error; | |
| host->irq_status = status; | |
| if (error) { | |
| /* Don't pollute the log with unsupported command timeouts */ | |
| if (host->wait != USDHI6_WAIT_FOR_CMD || | |
| error != USDHI6_SD_INFO2_RSP_TOUT) | |
| dev_warn(mmc_dev(host->mmc), | |
| "%s(): INFO2 error bits 0x%08x\n", | |
| __func__, error); | |
| else | |
| dev_dbg(mmc_dev(host->mmc), | |
| "%s(): INFO2 error bits 0x%08x\n", | |
| __func__, error); | |
| } | |
| return IRQ_WAKE_THREAD; | |
| } | |
| static irqreturn_t usdhi6_sdio(int irq, void *dev_id) | |
| { | |
| struct usdhi6_host *host = dev_id; | |
| u32 status = usdhi6_read(host, USDHI6_SDIO_INFO1) & ~host->sdio_mask; | |
| dev_dbg(mmc_dev(host->mmc), "%s(): status 0x%x\n", __func__, status); | |
| if (!status) | |
| return IRQ_NONE; | |
| usdhi6_write(host, USDHI6_SDIO_INFO1, ~status); | |
| mmc_signal_sdio_irq(host->mmc); | |
| return IRQ_HANDLED; | |
| } | |
| static irqreturn_t usdhi6_cd(int irq, void *dev_id) | |
| { | |
| struct usdhi6_host *host = dev_id; | |
| struct mmc_host *mmc = host->mmc; | |
| u16 status; | |
| /* We're only interested in hotplug events here */ | |
| status = usdhi6_read(host, USDHI6_SD_INFO1) & ~host->status_mask & | |
| USDHI6_SD_INFO1_CARD; | |
| if (!status) | |
| return IRQ_NONE; | |
| /* Ack */ | |
| usdhi6_write(host, USDHI6_SD_INFO1, ~status); | |
| if (!work_pending(&mmc->detect.work) && | |
| (((status & USDHI6_SD_INFO1_CARD_INSERT) && | |
| !mmc->card) || | |
| ((status & USDHI6_SD_INFO1_CARD_EJECT) && | |
| mmc->card))) | |
| mmc_detect_change(mmc, msecs_to_jiffies(100)); | |
| return IRQ_HANDLED; | |
| } | |
| /* | |
| * Actually this should not be needed, if the built-in timeout works reliably in | |
| * the both PIO cases and DMA never fails. But if DMA does fail, a timeout | |
| * handler might be the only way to catch the error. | |
| */ | |
| static void usdhi6_timeout_work(struct work_struct *work) | |
| { | |
| struct delayed_work *d = to_delayed_work(work); | |
| struct usdhi6_host *host = container_of(d, struct usdhi6_host, timeout_work); | |
| struct mmc_request *mrq = host->mrq; | |
| struct mmc_data *data = mrq ? mrq->data : NULL; | |
| struct scatterlist *sg; | |
| dev_warn(mmc_dev(host->mmc), | |
| "%s timeout wait %u CMD%d: IRQ 0x%08x:0x%08x, last IRQ 0x%08x\n", | |
| host->dma_active ? "DMA" : "PIO", | |
| host->wait, mrq ? mrq->cmd->opcode : -1, | |
| usdhi6_read(host, USDHI6_SD_INFO1), | |
| usdhi6_read(host, USDHI6_SD_INFO2), host->irq_status); | |
| if (host->dma_active) { | |
| usdhi6_dma_kill(host); | |
| usdhi6_dma_stop_unmap(host); | |
| } | |
| switch (host->wait) { | |
| default: | |
| dev_err(mmc_dev(host->mmc), "Invalid state %u\n", host->wait); | |
| /* mrq can be NULL in this actually impossible case */ | |
| case USDHI6_WAIT_FOR_CMD: | |
| usdhi6_error_code(host); | |
| if (mrq) | |
| mrq->cmd->error = -ETIMEDOUT; | |
| break; | |
| case USDHI6_WAIT_FOR_STOP: | |
| usdhi6_error_code(host); | |
| mrq->stop->error = -ETIMEDOUT; | |
| break; | |
| case USDHI6_WAIT_FOR_DMA: | |
| case USDHI6_WAIT_FOR_MREAD: | |
| case USDHI6_WAIT_FOR_MWRITE: | |
| case USDHI6_WAIT_FOR_READ: | |
| case USDHI6_WAIT_FOR_WRITE: | |
| sg = host->sg ?: data->sg; | |
| dev_dbg(mmc_dev(host->mmc), | |
| "%c: page #%u @ +0x%zx %ux%u in SG%u. Current SG %u bytes @ %u\n", | |
| data->flags & MMC_DATA_READ ? 'R' : 'W', host->page_idx, | |
| host->offset, data->blocks, data->blksz, data->sg_len, | |
| sg_dma_len(sg), sg->offset); | |
| usdhi6_sg_unmap(host, true); | |
| /* | |
| * If USDHI6_WAIT_FOR_DATA_END times out, we have already unmapped | |
| * the page | |
| */ | |
| case USDHI6_WAIT_FOR_DATA_END: | |
| usdhi6_error_code(host); | |
| data->error = -ETIMEDOUT; | |
| } | |
| if (mrq) | |
| usdhi6_request_done(host); | |
| } | |
| /* Probe / release */ | |
| static const struct of_device_id usdhi6_of_match[] = { | |
| {.compatible = "renesas,usdhi6rol0"}, | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(of, usdhi6_of_match); | |
| static int usdhi6_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct mmc_host *mmc; | |
| struct usdhi6_host *host; | |
| struct resource *res; | |
| int irq_cd, irq_sd, irq_sdio; | |
| u32 version; | |
| int ret; | |
| if (!dev->of_node) | |
| return -ENODEV; | |
| irq_cd = platform_get_irq_byname(pdev, "card detect"); | |
| irq_sd = platform_get_irq_byname(pdev, "data"); | |
| irq_sdio = platform_get_irq_byname(pdev, "SDIO"); | |
| if (irq_sd < 0 || irq_sdio < 0) | |
| return -ENODEV; | |
| mmc = mmc_alloc_host(sizeof(struct usdhi6_host), dev); | |
| if (!mmc) | |
| return -ENOMEM; | |
| ret = mmc_regulator_get_supply(mmc); | |
| if (ret == -EPROBE_DEFER) | |
| goto e_free_mmc; | |
| ret = mmc_of_parse(mmc); | |
| if (ret < 0) | |
| goto e_free_mmc; | |
| host = mmc_priv(mmc); | |
| host->mmc = mmc; | |
| host->wait = USDHI6_WAIT_FOR_REQUEST; | |
| host->timeout = msecs_to_jiffies(4000); | |
| host->pinctrl = devm_pinctrl_get(&pdev->dev); | |
| if (IS_ERR(host->pinctrl)) { | |
| ret = PTR_ERR(host->pinctrl); | |
| goto e_free_mmc; | |
| } | |
| host->pins_uhs = pinctrl_lookup_state(host->pinctrl, "state_uhs"); | |
| if (!IS_ERR(host->pins_uhs)) { | |
| host->pins_default = pinctrl_lookup_state(host->pinctrl, | |
| PINCTRL_STATE_DEFAULT); | |
| if (IS_ERR(host->pins_default)) { | |
| dev_err(dev, | |
| "UHS pinctrl requires a default pin state.\n"); | |
| ret = PTR_ERR(host->pins_default); | |
| goto e_free_mmc; | |
| } | |
| } | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| host->base = devm_ioremap_resource(dev, res); | |
| if (IS_ERR(host->base)) { | |
| ret = PTR_ERR(host->base); | |
| goto e_free_mmc; | |
| } | |
| host->clk = devm_clk_get(dev, NULL); | |
| if (IS_ERR(host->clk)) { | |
| ret = PTR_ERR(host->clk); | |
| goto e_free_mmc; | |
| } | |
| host->imclk = clk_get_rate(host->clk); | |
| ret = clk_prepare_enable(host->clk); | |
| if (ret < 0) | |
| goto e_free_mmc; | |
| version = usdhi6_read(host, USDHI6_VERSION); | |
| if ((version & 0xfff) != 0xa0d) { | |
| dev_err(dev, "Version not recognized %x\n", version); | |
| goto e_clk_off; | |
| } | |
| dev_info(dev, "A USDHI6ROL0 SD host detected with %d ports\n", | |
| usdhi6_read(host, USDHI6_SD_PORT_SEL) >> USDHI6_SD_PORT_SEL_PORTS_SHIFT); | |
| usdhi6_mask_all(host); | |
| if (irq_cd >= 0) { | |
| ret = devm_request_irq(dev, irq_cd, usdhi6_cd, 0, | |
| dev_name(dev), host); | |
| if (ret < 0) | |
| goto e_clk_off; | |
| } else { | |
| mmc->caps |= MMC_CAP_NEEDS_POLL; | |
| } | |
| ret = devm_request_threaded_irq(dev, irq_sd, usdhi6_sd, usdhi6_sd_bh, 0, | |
| dev_name(dev), host); | |
| if (ret < 0) | |
| goto e_clk_off; | |
| ret = devm_request_irq(dev, irq_sdio, usdhi6_sdio, 0, | |
| dev_name(dev), host); | |
| if (ret < 0) | |
| goto e_clk_off; | |
| INIT_DELAYED_WORK(&host->timeout_work, usdhi6_timeout_work); | |
| usdhi6_dma_request(host, res->start); | |
| mmc->ops = &usdhi6_ops; | |
| mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED | | |
| MMC_CAP_SDIO_IRQ; | |
| /* Set .max_segs to some random number. Feel free to adjust. */ | |
| mmc->max_segs = 32; | |
| mmc->max_blk_size = 512; | |
| mmc->max_req_size = PAGE_SIZE * mmc->max_segs; | |
| mmc->max_blk_count = mmc->max_req_size / mmc->max_blk_size; | |
| /* | |
| * Setting .max_seg_size to 1 page would simplify our page-mapping code, | |
| * But OTOH, having large segments makes DMA more efficient. We could | |
| * check, whether we managed to get DMA and fall back to 1 page | |
| * segments, but if we do manage to obtain DMA and then it fails at | |
| * run-time and we fall back to PIO, we will continue getting large | |
| * segments. So, we wouldn't be able to get rid of the code anyway. | |
| */ | |
| mmc->max_seg_size = mmc->max_req_size; | |
| if (!mmc->f_max) | |
| mmc->f_max = host->imclk; | |
| mmc->f_min = host->imclk / 512; | |
| platform_set_drvdata(pdev, host); | |
| ret = mmc_add_host(mmc); | |
| if (ret < 0) | |
| goto e_clk_off; | |
| return 0; | |
| e_clk_off: | |
| clk_disable_unprepare(host->clk); | |
| e_free_mmc: | |
| mmc_free_host(mmc); | |
| return ret; | |
| } | |
| static int usdhi6_remove(struct platform_device *pdev) | |
| { | |
| struct usdhi6_host *host = platform_get_drvdata(pdev); | |
| mmc_remove_host(host->mmc); | |
| usdhi6_mask_all(host); | |
| cancel_delayed_work_sync(&host->timeout_work); | |
| usdhi6_dma_release(host); | |
| clk_disable_unprepare(host->clk); | |
| mmc_free_host(host->mmc); | |
| return 0; | |
| } | |
| static struct platform_driver usdhi6_driver = { | |
| .probe = usdhi6_probe, | |
| .remove = usdhi6_remove, | |
| .driver = { | |
| .name = "usdhi6rol0", | |
| .of_match_table = usdhi6_of_match, | |
| }, | |
| }; | |
| module_platform_driver(usdhi6_driver); | |
| MODULE_DESCRIPTION("Renesas usdhi6rol0 SD/SDIO host driver"); | |
| MODULE_LICENSE("GPL v2"); | |
| MODULE_ALIAS("platform:usdhi6rol0"); | |
| MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>"); |