| /* | |
| * TI HECC (CAN) device driver | |
| * | |
| * This driver supports TI's HECC (High End CAN Controller module) and the | |
| * specs for the same is available at <http://www.ti.com> | |
| * | |
| * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation version 2. | |
| * | |
| * This program is distributed as is WITHOUT ANY WARRANTY of any | |
| * kind, whether express or implied; without even the implied warranty | |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| */ | |
| /* | |
| * Your platform definitions should specify module ram offsets and interrupt | |
| * number to use as follows: | |
| * | |
| * static struct ti_hecc_platform_data am3517_evm_hecc_pdata = { | |
| * .scc_hecc_offset = 0, | |
| * .scc_ram_offset = 0x3000, | |
| * .hecc_ram_offset = 0x3000, | |
| * .mbx_offset = 0x2000, | |
| * .int_line = 0, | |
| * .revision = 1, | |
| * .transceiver_switch = hecc_phy_control, | |
| * }; | |
| * | |
| * Please see include/linux/can/platform/ti_hecc.h for description of | |
| * above fields. | |
| * | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/types.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/errno.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/skbuff.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/clk.h> | |
| #include <linux/io.h> | |
| #include <linux/can/dev.h> | |
| #include <linux/can/error.h> | |
| #include <linux/can/led.h> | |
| #include <linux/can/platform/ti_hecc.h> | |
| #define DRV_NAME "ti_hecc" | |
| #define HECC_MODULE_VERSION "0.7" | |
| MODULE_VERSION(HECC_MODULE_VERSION); | |
| #define DRV_DESC "TI High End CAN Controller Driver " HECC_MODULE_VERSION | |
| /* TX / RX Mailbox Configuration */ | |
| #define HECC_MAX_MAILBOXES 32 /* hardware mailboxes - do not change */ | |
| #define MAX_TX_PRIO 0x3F /* hardware value - do not change */ | |
| /* | |
| * Important Note: TX mailbox configuration | |
| * TX mailboxes should be restricted to the number of SKB buffers to avoid | |
| * maintaining SKB buffers separately. TX mailboxes should be a power of 2 | |
| * for the mailbox logic to work. Top mailbox numbers are reserved for RX | |
| * and lower mailboxes for TX. | |
| * | |
| * HECC_MAX_TX_MBOX HECC_MB_TX_SHIFT | |
| * 4 (default) 2 | |
| * 8 3 | |
| * 16 4 | |
| */ | |
| #define HECC_MB_TX_SHIFT 2 /* as per table above */ | |
| #define HECC_MAX_TX_MBOX BIT(HECC_MB_TX_SHIFT) | |
| #define HECC_TX_PRIO_SHIFT (HECC_MB_TX_SHIFT) | |
| #define HECC_TX_PRIO_MASK (MAX_TX_PRIO << HECC_MB_TX_SHIFT) | |
| #define HECC_TX_MB_MASK (HECC_MAX_TX_MBOX - 1) | |
| #define HECC_TX_MASK ((HECC_MAX_TX_MBOX - 1) | HECC_TX_PRIO_MASK) | |
| #define HECC_TX_MBOX_MASK (~(BIT(HECC_MAX_TX_MBOX) - 1)) | |
| #define HECC_DEF_NAPI_WEIGHT HECC_MAX_RX_MBOX | |
| /* | |
| * Important Note: RX mailbox configuration | |
| * RX mailboxes are further logically split into two - main and buffer | |
| * mailboxes. The goal is to get all packets into main mailboxes as | |
| * driven by mailbox number and receive priority (higher to lower) and | |
| * buffer mailboxes are used to receive pkts while main mailboxes are being | |
| * processed. This ensures in-order packet reception. | |
| * | |
| * Here are the recommended values for buffer mailbox. Note that RX mailboxes | |
| * start after TX mailboxes: | |
| * | |
| * HECC_MAX_RX_MBOX HECC_RX_BUFFER_MBOX No of buffer mailboxes | |
| * 28 12 8 | |
| * 16 20 4 | |
| */ | |
| #define HECC_MAX_RX_MBOX (HECC_MAX_MAILBOXES - HECC_MAX_TX_MBOX) | |
| #define HECC_RX_BUFFER_MBOX 12 /* as per table above */ | |
| #define HECC_RX_FIRST_MBOX (HECC_MAX_MAILBOXES - 1) | |
| #define HECC_RX_HIGH_MBOX_MASK (~(BIT(HECC_RX_BUFFER_MBOX) - 1)) | |
| /* TI HECC module registers */ | |
| #define HECC_CANME 0x0 /* Mailbox enable */ | |
| #define HECC_CANMD 0x4 /* Mailbox direction */ | |
| #define HECC_CANTRS 0x8 /* Transmit request set */ | |
| #define HECC_CANTRR 0xC /* Transmit request */ | |
| #define HECC_CANTA 0x10 /* Transmission acknowledge */ | |
| #define HECC_CANAA 0x14 /* Abort acknowledge */ | |
| #define HECC_CANRMP 0x18 /* Receive message pending */ | |
| #define HECC_CANRML 0x1C /* Remote message lost */ | |
| #define HECC_CANRFP 0x20 /* Remote frame pending */ | |
| #define HECC_CANGAM 0x24 /* SECC only:Global acceptance mask */ | |
| #define HECC_CANMC 0x28 /* Master control */ | |
| #define HECC_CANBTC 0x2C /* Bit timing configuration */ | |
| #define HECC_CANES 0x30 /* Error and status */ | |
| #define HECC_CANTEC 0x34 /* Transmit error counter */ | |
| #define HECC_CANREC 0x38 /* Receive error counter */ | |
| #define HECC_CANGIF0 0x3C /* Global interrupt flag 0 */ | |
| #define HECC_CANGIM 0x40 /* Global interrupt mask */ | |
| #define HECC_CANGIF1 0x44 /* Global interrupt flag 1 */ | |
| #define HECC_CANMIM 0x48 /* Mailbox interrupt mask */ | |
| #define HECC_CANMIL 0x4C /* Mailbox interrupt level */ | |
| #define HECC_CANOPC 0x50 /* Overwrite protection control */ | |
| #define HECC_CANTIOC 0x54 /* Transmit I/O control */ | |
| #define HECC_CANRIOC 0x58 /* Receive I/O control */ | |
| #define HECC_CANLNT 0x5C /* HECC only: Local network time */ | |
| #define HECC_CANTOC 0x60 /* HECC only: Time-out control */ | |
| #define HECC_CANTOS 0x64 /* HECC only: Time-out status */ | |
| #define HECC_CANTIOCE 0x68 /* SCC only:Enhanced TX I/O control */ | |
| #define HECC_CANRIOCE 0x6C /* SCC only:Enhanced RX I/O control */ | |
| /* Mailbox registers */ | |
| #define HECC_CANMID 0x0 | |
| #define HECC_CANMCF 0x4 | |
| #define HECC_CANMDL 0x8 | |
| #define HECC_CANMDH 0xC | |
| #define HECC_SET_REG 0xFFFFFFFF | |
| #define HECC_CANID_MASK 0x3FF /* 18 bits mask for extended id's */ | |
| #define HECC_CCE_WAIT_COUNT 100 /* Wait for ~1 sec for CCE bit */ | |
| #define HECC_CANMC_SCM BIT(13) /* SCC compat mode */ | |
| #define HECC_CANMC_CCR BIT(12) /* Change config request */ | |
| #define HECC_CANMC_PDR BIT(11) /* Local Power down - for sleep mode */ | |
| #define HECC_CANMC_ABO BIT(7) /* Auto Bus On */ | |
| #define HECC_CANMC_STM BIT(6) /* Self test mode - loopback */ | |
| #define HECC_CANMC_SRES BIT(5) /* Software reset */ | |
| #define HECC_CANTIOC_EN BIT(3) /* Enable CAN TX I/O pin */ | |
| #define HECC_CANRIOC_EN BIT(3) /* Enable CAN RX I/O pin */ | |
| #define HECC_CANMID_IDE BIT(31) /* Extended frame format */ | |
| #define HECC_CANMID_AME BIT(30) /* Acceptance mask enable */ | |
| #define HECC_CANMID_AAM BIT(29) /* Auto answer mode */ | |
| #define HECC_CANES_FE BIT(24) /* form error */ | |
| #define HECC_CANES_BE BIT(23) /* bit error */ | |
| #define HECC_CANES_SA1 BIT(22) /* stuck at dominant error */ | |
| #define HECC_CANES_CRCE BIT(21) /* CRC error */ | |
| #define HECC_CANES_SE BIT(20) /* stuff bit error */ | |
| #define HECC_CANES_ACKE BIT(19) /* ack error */ | |
| #define HECC_CANES_BO BIT(18) /* Bus off status */ | |
| #define HECC_CANES_EP BIT(17) /* Error passive status */ | |
| #define HECC_CANES_EW BIT(16) /* Error warning status */ | |
| #define HECC_CANES_SMA BIT(5) /* suspend mode ack */ | |
| #define HECC_CANES_CCE BIT(4) /* Change config enabled */ | |
| #define HECC_CANES_PDA BIT(3) /* Power down mode ack */ | |
| #define HECC_CANBTC_SAM BIT(7) /* sample points */ | |
| #define HECC_BUS_ERROR (HECC_CANES_FE | HECC_CANES_BE |\ | |
| HECC_CANES_CRCE | HECC_CANES_SE |\ | |
| HECC_CANES_ACKE) | |
| #define HECC_CANMCF_RTR BIT(4) /* Remote transmit request */ | |
| #define HECC_CANGIF_MAIF BIT(17) /* Message alarm interrupt */ | |
| #define HECC_CANGIF_TCOIF BIT(16) /* Timer counter overflow int */ | |
| #define HECC_CANGIF_GMIF BIT(15) /* Global mailbox interrupt */ | |
| #define HECC_CANGIF_AAIF BIT(14) /* Abort ack interrupt */ | |
| #define HECC_CANGIF_WDIF BIT(13) /* Write denied interrupt */ | |
| #define HECC_CANGIF_WUIF BIT(12) /* Wake up interrupt */ | |
| #define HECC_CANGIF_RMLIF BIT(11) /* Receive message lost interrupt */ | |
| #define HECC_CANGIF_BOIF BIT(10) /* Bus off interrupt */ | |
| #define HECC_CANGIF_EPIF BIT(9) /* Error passive interrupt */ | |
| #define HECC_CANGIF_WLIF BIT(8) /* Warning level interrupt */ | |
| #define HECC_CANGIF_MBOX_MASK 0x1F /* Mailbox number mask */ | |
| #define HECC_CANGIM_I1EN BIT(1) /* Int line 1 enable */ | |
| #define HECC_CANGIM_I0EN BIT(0) /* Int line 0 enable */ | |
| #define HECC_CANGIM_DEF_MASK 0x700 /* only busoff/warning/passive */ | |
| #define HECC_CANGIM_SIL BIT(2) /* system interrupts to int line 1 */ | |
| /* CAN Bittiming constants as per HECC specs */ | |
| static const struct can_bittiming_const ti_hecc_bittiming_const = { | |
| .name = DRV_NAME, | |
| .tseg1_min = 1, | |
| .tseg1_max = 16, | |
| .tseg2_min = 1, | |
| .tseg2_max = 8, | |
| .sjw_max = 4, | |
| .brp_min = 1, | |
| .brp_max = 256, | |
| .brp_inc = 1, | |
| }; | |
| struct ti_hecc_priv { | |
| struct can_priv can; /* MUST be first member/field */ | |
| struct napi_struct napi; | |
| struct net_device *ndev; | |
| struct clk *clk; | |
| void __iomem *base; | |
| u32 scc_ram_offset; | |
| u32 hecc_ram_offset; | |
| u32 mbx_offset; | |
| u32 int_line; | |
| spinlock_t mbx_lock; /* CANME register needs protection */ | |
| u32 tx_head; | |
| u32 tx_tail; | |
| u32 rx_next; | |
| void (*transceiver_switch)(int); | |
| }; | |
| static inline int get_tx_head_mb(struct ti_hecc_priv *priv) | |
| { | |
| return priv->tx_head & HECC_TX_MB_MASK; | |
| } | |
| static inline int get_tx_tail_mb(struct ti_hecc_priv *priv) | |
| { | |
| return priv->tx_tail & HECC_TX_MB_MASK; | |
| } | |
| static inline int get_tx_head_prio(struct ti_hecc_priv *priv) | |
| { | |
| return (priv->tx_head >> HECC_TX_PRIO_SHIFT) & MAX_TX_PRIO; | |
| } | |
| static inline void hecc_write_lam(struct ti_hecc_priv *priv, u32 mbxno, u32 val) | |
| { | |
| __raw_writel(val, priv->base + priv->hecc_ram_offset + mbxno * 4); | |
| } | |
| static inline void hecc_write_mbx(struct ti_hecc_priv *priv, u32 mbxno, | |
| u32 reg, u32 val) | |
| { | |
| __raw_writel(val, priv->base + priv->mbx_offset + mbxno * 0x10 + | |
| reg); | |
| } | |
| static inline u32 hecc_read_mbx(struct ti_hecc_priv *priv, u32 mbxno, u32 reg) | |
| { | |
| return __raw_readl(priv->base + priv->mbx_offset + mbxno * 0x10 + | |
| reg); | |
| } | |
| static inline void hecc_write(struct ti_hecc_priv *priv, u32 reg, u32 val) | |
| { | |
| __raw_writel(val, priv->base + reg); | |
| } | |
| static inline u32 hecc_read(struct ti_hecc_priv *priv, int reg) | |
| { | |
| return __raw_readl(priv->base + reg); | |
| } | |
| static inline void hecc_set_bit(struct ti_hecc_priv *priv, int reg, | |
| u32 bit_mask) | |
| { | |
| hecc_write(priv, reg, hecc_read(priv, reg) | bit_mask); | |
| } | |
| static inline void hecc_clear_bit(struct ti_hecc_priv *priv, int reg, | |
| u32 bit_mask) | |
| { | |
| hecc_write(priv, reg, hecc_read(priv, reg) & ~bit_mask); | |
| } | |
| static inline u32 hecc_get_bit(struct ti_hecc_priv *priv, int reg, u32 bit_mask) | |
| { | |
| return (hecc_read(priv, reg) & bit_mask) ? 1 : 0; | |
| } | |
| static int ti_hecc_set_btc(struct ti_hecc_priv *priv) | |
| { | |
| struct can_bittiming *bit_timing = &priv->can.bittiming; | |
| u32 can_btc; | |
| can_btc = (bit_timing->phase_seg2 - 1) & 0x7; | |
| can_btc |= ((bit_timing->phase_seg1 + bit_timing->prop_seg - 1) | |
| & 0xF) << 3; | |
| if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) { | |
| if (bit_timing->brp > 4) | |
| can_btc |= HECC_CANBTC_SAM; | |
| else | |
| netdev_warn(priv->ndev, "WARN: Triple" | |
| "sampling not set due to h/w limitations"); | |
| } | |
| can_btc |= ((bit_timing->sjw - 1) & 0x3) << 8; | |
| can_btc |= ((bit_timing->brp - 1) & 0xFF) << 16; | |
| /* ERM being set to 0 by default meaning resync at falling edge */ | |
| hecc_write(priv, HECC_CANBTC, can_btc); | |
| netdev_info(priv->ndev, "setting CANBTC=%#x\n", can_btc); | |
| return 0; | |
| } | |
| static void ti_hecc_transceiver_switch(const struct ti_hecc_priv *priv, | |
| int on) | |
| { | |
| if (priv->transceiver_switch) | |
| priv->transceiver_switch(on); | |
| } | |
| static void ti_hecc_reset(struct net_device *ndev) | |
| { | |
| u32 cnt; | |
| struct ti_hecc_priv *priv = netdev_priv(ndev); | |
| netdev_dbg(ndev, "resetting hecc ...\n"); | |
| hecc_set_bit(priv, HECC_CANMC, HECC_CANMC_SRES); | |
| /* Set change control request and wait till enabled */ | |
| hecc_set_bit(priv, HECC_CANMC, HECC_CANMC_CCR); | |
| /* | |
| * INFO: It has been observed that at times CCE bit may not be | |
| * set and hw seems to be ok even if this bit is not set so | |
| * timing out with a timing of 1ms to respect the specs | |
| */ | |
| cnt = HECC_CCE_WAIT_COUNT; | |
| while (!hecc_get_bit(priv, HECC_CANES, HECC_CANES_CCE) && cnt != 0) { | |
| --cnt; | |
| udelay(10); | |
| } | |
| /* | |
| * Note: On HECC, BTC can be programmed only in initialization mode, so | |
| * it is expected that the can bittiming parameters are set via ip | |
| * utility before the device is opened | |
| */ | |
| ti_hecc_set_btc(priv); | |
| /* Clear CCR (and CANMC register) and wait for CCE = 0 enable */ | |
| hecc_write(priv, HECC_CANMC, 0); | |
| /* | |
| * INFO: CAN net stack handles bus off and hence disabling auto-bus-on | |
| * hecc_set_bit(priv, HECC_CANMC, HECC_CANMC_ABO); | |
| */ | |
| /* | |
| * INFO: It has been observed that at times CCE bit may not be | |
| * set and hw seems to be ok even if this bit is not set so | |
| */ | |
| cnt = HECC_CCE_WAIT_COUNT; | |
| while (hecc_get_bit(priv, HECC_CANES, HECC_CANES_CCE) && cnt != 0) { | |
| --cnt; | |
| udelay(10); | |
| } | |
| /* Enable TX and RX I/O Control pins */ | |
| hecc_write(priv, HECC_CANTIOC, HECC_CANTIOC_EN); | |
| hecc_write(priv, HECC_CANRIOC, HECC_CANRIOC_EN); | |
| /* Clear registers for clean operation */ | |
| hecc_write(priv, HECC_CANTA, HECC_SET_REG); | |
| hecc_write(priv, HECC_CANRMP, HECC_SET_REG); | |
| hecc_write(priv, HECC_CANGIF0, HECC_SET_REG); | |
| hecc_write(priv, HECC_CANGIF1, HECC_SET_REG); | |
| hecc_write(priv, HECC_CANME, 0); | |
| hecc_write(priv, HECC_CANMD, 0); | |
| /* SCC compat mode NOT supported (and not needed too) */ | |
| hecc_set_bit(priv, HECC_CANMC, HECC_CANMC_SCM); | |
| } | |
| static void ti_hecc_start(struct net_device *ndev) | |
| { | |
| struct ti_hecc_priv *priv = netdev_priv(ndev); | |
| u32 cnt, mbxno, mbx_mask; | |
| /* put HECC in initialization mode and set btc */ | |
| ti_hecc_reset(ndev); | |
| priv->tx_head = priv->tx_tail = HECC_TX_MASK; | |
| priv->rx_next = HECC_RX_FIRST_MBOX; | |
| /* Enable local and global acceptance mask registers */ | |
| hecc_write(priv, HECC_CANGAM, HECC_SET_REG); | |
| /* Prepare configured mailboxes to receive messages */ | |
| for (cnt = 0; cnt < HECC_MAX_RX_MBOX; cnt++) { | |
| mbxno = HECC_MAX_MAILBOXES - 1 - cnt; | |
| mbx_mask = BIT(mbxno); | |
| hecc_clear_bit(priv, HECC_CANME, mbx_mask); | |
| hecc_write_mbx(priv, mbxno, HECC_CANMID, HECC_CANMID_AME); | |
| hecc_write_lam(priv, mbxno, HECC_SET_REG); | |
| hecc_set_bit(priv, HECC_CANMD, mbx_mask); | |
| hecc_set_bit(priv, HECC_CANME, mbx_mask); | |
| hecc_set_bit(priv, HECC_CANMIM, mbx_mask); | |
| } | |
| /* Prevent message over-write & Enable interrupts */ | |
| hecc_write(priv, HECC_CANOPC, HECC_SET_REG); | |
| if (priv->int_line) { | |
| hecc_write(priv, HECC_CANMIL, HECC_SET_REG); | |
| hecc_write(priv, HECC_CANGIM, HECC_CANGIM_DEF_MASK | | |
| HECC_CANGIM_I1EN | HECC_CANGIM_SIL); | |
| } else { | |
| hecc_write(priv, HECC_CANMIL, 0); | |
| hecc_write(priv, HECC_CANGIM, | |
| HECC_CANGIM_DEF_MASK | HECC_CANGIM_I0EN); | |
| } | |
| priv->can.state = CAN_STATE_ERROR_ACTIVE; | |
| } | |
| static void ti_hecc_stop(struct net_device *ndev) | |
| { | |
| struct ti_hecc_priv *priv = netdev_priv(ndev); | |
| /* Disable interrupts and disable mailboxes */ | |
| hecc_write(priv, HECC_CANGIM, 0); | |
| hecc_write(priv, HECC_CANMIM, 0); | |
| hecc_write(priv, HECC_CANME, 0); | |
| priv->can.state = CAN_STATE_STOPPED; | |
| } | |
| static int ti_hecc_do_set_mode(struct net_device *ndev, enum can_mode mode) | |
| { | |
| int ret = 0; | |
| switch (mode) { | |
| case CAN_MODE_START: | |
| ti_hecc_start(ndev); | |
| netif_wake_queue(ndev); | |
| break; | |
| default: | |
| ret = -EOPNOTSUPP; | |
| break; | |
| } | |
| return ret; | |
| } | |
| static int ti_hecc_get_berr_counter(const struct net_device *ndev, | |
| struct can_berr_counter *bec) | |
| { | |
| struct ti_hecc_priv *priv = netdev_priv(ndev); | |
| bec->txerr = hecc_read(priv, HECC_CANTEC); | |
| bec->rxerr = hecc_read(priv, HECC_CANREC); | |
| return 0; | |
| } | |
| /* | |
| * ti_hecc_xmit: HECC Transmit | |
| * | |
| * The transmit mailboxes start from 0 to HECC_MAX_TX_MBOX. In HECC the | |
| * priority of the mailbox for tranmission is dependent upon priority setting | |
| * field in mailbox registers. The mailbox with highest value in priority field | |
| * is transmitted first. Only when two mailboxes have the same value in | |
| * priority field the highest numbered mailbox is transmitted first. | |
| * | |
| * To utilize the HECC priority feature as described above we start with the | |
| * highest numbered mailbox with highest priority level and move on to the next | |
| * mailbox with the same priority level and so on. Once we loop through all the | |
| * transmit mailboxes we choose the next priority level (lower) and so on | |
| * until we reach the lowest priority level on the lowest numbered mailbox | |
| * when we stop transmission until all mailboxes are transmitted and then | |
| * restart at highest numbered mailbox with highest priority. | |
| * | |
| * Two counters (head and tail) are used to track the next mailbox to transmit | |
| * and to track the echo buffer for already transmitted mailbox. The queue | |
| * is stopped when all the mailboxes are busy or when there is a priority | |
| * value roll-over happens. | |
| */ | |
| static netdev_tx_t ti_hecc_xmit(struct sk_buff *skb, struct net_device *ndev) | |
| { | |
| struct ti_hecc_priv *priv = netdev_priv(ndev); | |
| struct can_frame *cf = (struct can_frame *)skb->data; | |
| u32 mbxno, mbx_mask, data; | |
| unsigned long flags; | |
| if (can_dropped_invalid_skb(ndev, skb)) | |
| return NETDEV_TX_OK; | |
| mbxno = get_tx_head_mb(priv); | |
| mbx_mask = BIT(mbxno); | |
| spin_lock_irqsave(&priv->mbx_lock, flags); | |
| if (unlikely(hecc_read(priv, HECC_CANME) & mbx_mask)) { | |
| spin_unlock_irqrestore(&priv->mbx_lock, flags); | |
| netif_stop_queue(ndev); | |
| netdev_err(priv->ndev, | |
| "BUG: TX mbx not ready tx_head=%08X, tx_tail=%08X\n", | |
| priv->tx_head, priv->tx_tail); | |
| return NETDEV_TX_BUSY; | |
| } | |
| spin_unlock_irqrestore(&priv->mbx_lock, flags); | |
| /* Prepare mailbox for transmission */ | |
| data = cf->can_dlc | (get_tx_head_prio(priv) << 8); | |
| if (cf->can_id & CAN_RTR_FLAG) /* Remote transmission request */ | |
| data |= HECC_CANMCF_RTR; | |
| hecc_write_mbx(priv, mbxno, HECC_CANMCF, data); | |
| if (cf->can_id & CAN_EFF_FLAG) /* Extended frame format */ | |
| data = (cf->can_id & CAN_EFF_MASK) | HECC_CANMID_IDE; | |
| else /* Standard frame format */ | |
| data = (cf->can_id & CAN_SFF_MASK) << 18; | |
| hecc_write_mbx(priv, mbxno, HECC_CANMID, data); | |
| hecc_write_mbx(priv, mbxno, HECC_CANMDL, | |
| be32_to_cpu(*(__be32 *)(cf->data))); | |
| if (cf->can_dlc > 4) | |
| hecc_write_mbx(priv, mbxno, HECC_CANMDH, | |
| be32_to_cpu(*(__be32 *)(cf->data + 4))); | |
| else | |
| *(u32 *)(cf->data + 4) = 0; | |
| can_put_echo_skb(skb, ndev, mbxno); | |
| spin_lock_irqsave(&priv->mbx_lock, flags); | |
| --priv->tx_head; | |
| if ((hecc_read(priv, HECC_CANME) & BIT(get_tx_head_mb(priv))) || | |
| (priv->tx_head & HECC_TX_MASK) == HECC_TX_MASK) { | |
| netif_stop_queue(ndev); | |
| } | |
| hecc_set_bit(priv, HECC_CANME, mbx_mask); | |
| spin_unlock_irqrestore(&priv->mbx_lock, flags); | |
| hecc_clear_bit(priv, HECC_CANMD, mbx_mask); | |
| hecc_set_bit(priv, HECC_CANMIM, mbx_mask); | |
| hecc_write(priv, HECC_CANTRS, mbx_mask); | |
| return NETDEV_TX_OK; | |
| } | |
| static int ti_hecc_rx_pkt(struct ti_hecc_priv *priv, int mbxno) | |
| { | |
| struct net_device_stats *stats = &priv->ndev->stats; | |
| struct can_frame *cf; | |
| struct sk_buff *skb; | |
| u32 data, mbx_mask; | |
| unsigned long flags; | |
| skb = alloc_can_skb(priv->ndev, &cf); | |
| if (!skb) { | |
| if (printk_ratelimit()) | |
| netdev_err(priv->ndev, | |
| "ti_hecc_rx_pkt: alloc_can_skb() failed\n"); | |
| return -ENOMEM; | |
| } | |
| mbx_mask = BIT(mbxno); | |
| data = hecc_read_mbx(priv, mbxno, HECC_CANMID); | |
| if (data & HECC_CANMID_IDE) | |
| cf->can_id = (data & CAN_EFF_MASK) | CAN_EFF_FLAG; | |
| else | |
| cf->can_id = (data >> 18) & CAN_SFF_MASK; | |
| data = hecc_read_mbx(priv, mbxno, HECC_CANMCF); | |
| if (data & HECC_CANMCF_RTR) | |
| cf->can_id |= CAN_RTR_FLAG; | |
| cf->can_dlc = get_can_dlc(data & 0xF); | |
| data = hecc_read_mbx(priv, mbxno, HECC_CANMDL); | |
| *(__be32 *)(cf->data) = cpu_to_be32(data); | |
| if (cf->can_dlc > 4) { | |
| data = hecc_read_mbx(priv, mbxno, HECC_CANMDH); | |
| *(__be32 *)(cf->data + 4) = cpu_to_be32(data); | |
| } | |
| spin_lock_irqsave(&priv->mbx_lock, flags); | |
| hecc_clear_bit(priv, HECC_CANME, mbx_mask); | |
| hecc_write(priv, HECC_CANRMP, mbx_mask); | |
| /* enable mailbox only if it is part of rx buffer mailboxes */ | |
| if (priv->rx_next < HECC_RX_BUFFER_MBOX) | |
| hecc_set_bit(priv, HECC_CANME, mbx_mask); | |
| spin_unlock_irqrestore(&priv->mbx_lock, flags); | |
| stats->rx_bytes += cf->can_dlc; | |
| can_led_event(priv->ndev, CAN_LED_EVENT_RX); | |
| netif_receive_skb(skb); | |
| stats->rx_packets++; | |
| return 0; | |
| } | |
| /* | |
| * ti_hecc_rx_poll - HECC receive pkts | |
| * | |
| * The receive mailboxes start from highest numbered mailbox till last xmit | |
| * mailbox. On CAN frame reception the hardware places the data into highest | |
| * numbered mailbox that matches the CAN ID filter. Since all receive mailboxes | |
| * have same filtering (ALL CAN frames) packets will arrive in the highest | |
| * available RX mailbox and we need to ensure in-order packet reception. | |
| * | |
| * To ensure the packets are received in the right order we logically divide | |
| * the RX mailboxes into main and buffer mailboxes. Packets are received as per | |
| * mailbox priotity (higher to lower) in the main bank and once it is full we | |
| * disable further reception into main mailboxes. While the main mailboxes are | |
| * processed in NAPI, further packets are received in buffer mailboxes. | |
| * | |
| * We maintain a RX next mailbox counter to process packets and once all main | |
| * mailboxe packets are passed to the upper stack we enable all of them but | |
| * continue to process packets received in buffer mailboxes. With each packet | |
| * received from buffer mailbox we enable it immediately so as to handle the | |
| * overflow from higher mailboxes. | |
| */ | |
| static int ti_hecc_rx_poll(struct napi_struct *napi, int quota) | |
| { | |
| struct net_device *ndev = napi->dev; | |
| struct ti_hecc_priv *priv = netdev_priv(ndev); | |
| u32 num_pkts = 0; | |
| u32 mbx_mask; | |
| unsigned long pending_pkts, flags; | |
| if (!netif_running(ndev)) | |
| return 0; | |
| while ((pending_pkts = hecc_read(priv, HECC_CANRMP)) && | |
| num_pkts < quota) { | |
| mbx_mask = BIT(priv->rx_next); /* next rx mailbox to process */ | |
| if (mbx_mask & pending_pkts) { | |
| if (ti_hecc_rx_pkt(priv, priv->rx_next) < 0) | |
| return num_pkts; | |
| ++num_pkts; | |
| } else if (priv->rx_next > HECC_RX_BUFFER_MBOX) { | |
| break; /* pkt not received yet */ | |
| } | |
| --priv->rx_next; | |
| if (priv->rx_next == HECC_RX_BUFFER_MBOX) { | |
| /* enable high bank mailboxes */ | |
| spin_lock_irqsave(&priv->mbx_lock, flags); | |
| mbx_mask = hecc_read(priv, HECC_CANME); | |
| mbx_mask |= HECC_RX_HIGH_MBOX_MASK; | |
| hecc_write(priv, HECC_CANME, mbx_mask); | |
| spin_unlock_irqrestore(&priv->mbx_lock, flags); | |
| } else if (priv->rx_next == HECC_MAX_TX_MBOX - 1) { | |
| priv->rx_next = HECC_RX_FIRST_MBOX; | |
| break; | |
| } | |
| } | |
| /* Enable packet interrupt if all pkts are handled */ | |
| if (hecc_read(priv, HECC_CANRMP) == 0) { | |
| napi_complete(napi); | |
| /* Re-enable RX mailbox interrupts */ | |
| mbx_mask = hecc_read(priv, HECC_CANMIM); | |
| mbx_mask |= HECC_TX_MBOX_MASK; | |
| hecc_write(priv, HECC_CANMIM, mbx_mask); | |
| } | |
| return num_pkts; | |
| } | |
| static int ti_hecc_error(struct net_device *ndev, int int_status, | |
| int err_status) | |
| { | |
| struct ti_hecc_priv *priv = netdev_priv(ndev); | |
| struct net_device_stats *stats = &ndev->stats; | |
| struct can_frame *cf; | |
| struct sk_buff *skb; | |
| /* propagate the error condition to the can stack */ | |
| skb = alloc_can_err_skb(ndev, &cf); | |
| if (!skb) { | |
| if (printk_ratelimit()) | |
| netdev_err(priv->ndev, | |
| "ti_hecc_error: alloc_can_err_skb() failed\n"); | |
| return -ENOMEM; | |
| } | |
| if (int_status & HECC_CANGIF_WLIF) { /* warning level int */ | |
| if ((int_status & HECC_CANGIF_BOIF) == 0) { | |
| priv->can.state = CAN_STATE_ERROR_WARNING; | |
| ++priv->can.can_stats.error_warning; | |
| cf->can_id |= CAN_ERR_CRTL; | |
| if (hecc_read(priv, HECC_CANTEC) > 96) | |
| cf->data[1] |= CAN_ERR_CRTL_TX_WARNING; | |
| if (hecc_read(priv, HECC_CANREC) > 96) | |
| cf->data[1] |= CAN_ERR_CRTL_RX_WARNING; | |
| } | |
| hecc_set_bit(priv, HECC_CANES, HECC_CANES_EW); | |
| netdev_dbg(priv->ndev, "Error Warning interrupt\n"); | |
| hecc_clear_bit(priv, HECC_CANMC, HECC_CANMC_CCR); | |
| } | |
| if (int_status & HECC_CANGIF_EPIF) { /* error passive int */ | |
| if ((int_status & HECC_CANGIF_BOIF) == 0) { | |
| priv->can.state = CAN_STATE_ERROR_PASSIVE; | |
| ++priv->can.can_stats.error_passive; | |
| cf->can_id |= CAN_ERR_CRTL; | |
| if (hecc_read(priv, HECC_CANTEC) > 127) | |
| cf->data[1] |= CAN_ERR_CRTL_TX_PASSIVE; | |
| if (hecc_read(priv, HECC_CANREC) > 127) | |
| cf->data[1] |= CAN_ERR_CRTL_RX_PASSIVE; | |
| } | |
| hecc_set_bit(priv, HECC_CANES, HECC_CANES_EP); | |
| netdev_dbg(priv->ndev, "Error passive interrupt\n"); | |
| hecc_clear_bit(priv, HECC_CANMC, HECC_CANMC_CCR); | |
| } | |
| /* | |
| * Need to check busoff condition in error status register too to | |
| * ensure warning interrupts don't hog the system | |
| */ | |
| if ((int_status & HECC_CANGIF_BOIF) || (err_status & HECC_CANES_BO)) { | |
| priv->can.state = CAN_STATE_BUS_OFF; | |
| cf->can_id |= CAN_ERR_BUSOFF; | |
| hecc_set_bit(priv, HECC_CANES, HECC_CANES_BO); | |
| hecc_clear_bit(priv, HECC_CANMC, HECC_CANMC_CCR); | |
| /* Disable all interrupts in bus-off to avoid int hog */ | |
| hecc_write(priv, HECC_CANGIM, 0); | |
| ++priv->can.can_stats.bus_off; | |
| can_bus_off(ndev); | |
| } | |
| if (err_status & HECC_BUS_ERROR) { | |
| ++priv->can.can_stats.bus_error; | |
| cf->can_id |= CAN_ERR_BUSERROR | CAN_ERR_PROT; | |
| if (err_status & HECC_CANES_FE) { | |
| hecc_set_bit(priv, HECC_CANES, HECC_CANES_FE); | |
| cf->data[2] |= CAN_ERR_PROT_FORM; | |
| } | |
| if (err_status & HECC_CANES_BE) { | |
| hecc_set_bit(priv, HECC_CANES, HECC_CANES_BE); | |
| cf->data[2] |= CAN_ERR_PROT_BIT; | |
| } | |
| if (err_status & HECC_CANES_SE) { | |
| hecc_set_bit(priv, HECC_CANES, HECC_CANES_SE); | |
| cf->data[2] |= CAN_ERR_PROT_STUFF; | |
| } | |
| if (err_status & HECC_CANES_CRCE) { | |
| hecc_set_bit(priv, HECC_CANES, HECC_CANES_CRCE); | |
| cf->data[3] = CAN_ERR_PROT_LOC_CRC_SEQ; | |
| } | |
| if (err_status & HECC_CANES_ACKE) { | |
| hecc_set_bit(priv, HECC_CANES, HECC_CANES_ACKE); | |
| cf->data[3] = CAN_ERR_PROT_LOC_ACK; | |
| } | |
| } | |
| stats->rx_packets++; | |
| stats->rx_bytes += cf->can_dlc; | |
| netif_rx(skb); | |
| return 0; | |
| } | |
| static irqreturn_t ti_hecc_interrupt(int irq, void *dev_id) | |
| { | |
| struct net_device *ndev = (struct net_device *)dev_id; | |
| struct ti_hecc_priv *priv = netdev_priv(ndev); | |
| struct net_device_stats *stats = &ndev->stats; | |
| u32 mbxno, mbx_mask, int_status, err_status; | |
| unsigned long ack, flags; | |
| int_status = hecc_read(priv, | |
| (priv->int_line) ? HECC_CANGIF1 : HECC_CANGIF0); | |
| if (!int_status) | |
| return IRQ_NONE; | |
| err_status = hecc_read(priv, HECC_CANES); | |
| if (err_status & (HECC_BUS_ERROR | HECC_CANES_BO | | |
| HECC_CANES_EP | HECC_CANES_EW)) | |
| ti_hecc_error(ndev, int_status, err_status); | |
| if (int_status & HECC_CANGIF_GMIF) { | |
| while (priv->tx_tail - priv->tx_head > 0) { | |
| mbxno = get_tx_tail_mb(priv); | |
| mbx_mask = BIT(mbxno); | |
| if (!(mbx_mask & hecc_read(priv, HECC_CANTA))) | |
| break; | |
| hecc_clear_bit(priv, HECC_CANMIM, mbx_mask); | |
| hecc_write(priv, HECC_CANTA, mbx_mask); | |
| spin_lock_irqsave(&priv->mbx_lock, flags); | |
| hecc_clear_bit(priv, HECC_CANME, mbx_mask); | |
| spin_unlock_irqrestore(&priv->mbx_lock, flags); | |
| stats->tx_bytes += hecc_read_mbx(priv, mbxno, | |
| HECC_CANMCF) & 0xF; | |
| stats->tx_packets++; | |
| can_led_event(ndev, CAN_LED_EVENT_TX); | |
| can_get_echo_skb(ndev, mbxno); | |
| --priv->tx_tail; | |
| } | |
| /* restart queue if wrap-up or if queue stalled on last pkt */ | |
| if (((priv->tx_head == priv->tx_tail) && | |
| ((priv->tx_head & HECC_TX_MASK) != HECC_TX_MASK)) || | |
| (((priv->tx_tail & HECC_TX_MASK) == HECC_TX_MASK) && | |
| ((priv->tx_head & HECC_TX_MASK) == HECC_TX_MASK))) | |
| netif_wake_queue(ndev); | |
| /* Disable RX mailbox interrupts and let NAPI reenable them */ | |
| if (hecc_read(priv, HECC_CANRMP)) { | |
| ack = hecc_read(priv, HECC_CANMIM); | |
| ack &= BIT(HECC_MAX_TX_MBOX) - 1; | |
| hecc_write(priv, HECC_CANMIM, ack); | |
| napi_schedule(&priv->napi); | |
| } | |
| } | |
| /* clear all interrupt conditions - read back to avoid spurious ints */ | |
| if (priv->int_line) { | |
| hecc_write(priv, HECC_CANGIF1, HECC_SET_REG); | |
| int_status = hecc_read(priv, HECC_CANGIF1); | |
| } else { | |
| hecc_write(priv, HECC_CANGIF0, HECC_SET_REG); | |
| int_status = hecc_read(priv, HECC_CANGIF0); | |
| } | |
| return IRQ_HANDLED; | |
| } | |
| static int ti_hecc_open(struct net_device *ndev) | |
| { | |
| struct ti_hecc_priv *priv = netdev_priv(ndev); | |
| int err; | |
| err = request_irq(ndev->irq, ti_hecc_interrupt, IRQF_SHARED, | |
| ndev->name, ndev); | |
| if (err) { | |
| netdev_err(ndev, "error requesting interrupt\n"); | |
| return err; | |
| } | |
| ti_hecc_transceiver_switch(priv, 1); | |
| /* Open common can device */ | |
| err = open_candev(ndev); | |
| if (err) { | |
| netdev_err(ndev, "open_candev() failed %d\n", err); | |
| ti_hecc_transceiver_switch(priv, 0); | |
| free_irq(ndev->irq, ndev); | |
| return err; | |
| } | |
| can_led_event(ndev, CAN_LED_EVENT_OPEN); | |
| ti_hecc_start(ndev); | |
| napi_enable(&priv->napi); | |
| netif_start_queue(ndev); | |
| return 0; | |
| } | |
| static int ti_hecc_close(struct net_device *ndev) | |
| { | |
| struct ti_hecc_priv *priv = netdev_priv(ndev); | |
| netif_stop_queue(ndev); | |
| napi_disable(&priv->napi); | |
| ti_hecc_stop(ndev); | |
| free_irq(ndev->irq, ndev); | |
| close_candev(ndev); | |
| ti_hecc_transceiver_switch(priv, 0); | |
| can_led_event(ndev, CAN_LED_EVENT_STOP); | |
| return 0; | |
| } | |
| static const struct net_device_ops ti_hecc_netdev_ops = { | |
| .ndo_open = ti_hecc_open, | |
| .ndo_stop = ti_hecc_close, | |
| .ndo_start_xmit = ti_hecc_xmit, | |
| .ndo_change_mtu = can_change_mtu, | |
| }; | |
| static int ti_hecc_probe(struct platform_device *pdev) | |
| { | |
| struct net_device *ndev = (struct net_device *)0; | |
| struct ti_hecc_priv *priv; | |
| struct ti_hecc_platform_data *pdata; | |
| struct resource *mem, *irq; | |
| void __iomem *addr; | |
| int err = -ENODEV; | |
| pdata = dev_get_platdata(&pdev->dev); | |
| if (!pdata) { | |
| dev_err(&pdev->dev, "No platform data\n"); | |
| goto probe_exit; | |
| } | |
| mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| if (!mem) { | |
| dev_err(&pdev->dev, "No mem resources\n"); | |
| goto probe_exit; | |
| } | |
| irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); | |
| if (!irq) { | |
| dev_err(&pdev->dev, "No irq resource\n"); | |
| goto probe_exit; | |
| } | |
| if (!request_mem_region(mem->start, resource_size(mem), pdev->name)) { | |
| dev_err(&pdev->dev, "HECC region already claimed\n"); | |
| err = -EBUSY; | |
| goto probe_exit; | |
| } | |
| addr = ioremap(mem->start, resource_size(mem)); | |
| if (!addr) { | |
| dev_err(&pdev->dev, "ioremap failed\n"); | |
| err = -ENOMEM; | |
| goto probe_exit_free_region; | |
| } | |
| ndev = alloc_candev(sizeof(struct ti_hecc_priv), HECC_MAX_TX_MBOX); | |
| if (!ndev) { | |
| dev_err(&pdev->dev, "alloc_candev failed\n"); | |
| err = -ENOMEM; | |
| goto probe_exit_iounmap; | |
| } | |
| priv = netdev_priv(ndev); | |
| priv->ndev = ndev; | |
| priv->base = addr; | |
| priv->scc_ram_offset = pdata->scc_ram_offset; | |
| priv->hecc_ram_offset = pdata->hecc_ram_offset; | |
| priv->mbx_offset = pdata->mbx_offset; | |
| priv->int_line = pdata->int_line; | |
| priv->transceiver_switch = pdata->transceiver_switch; | |
| priv->can.bittiming_const = &ti_hecc_bittiming_const; | |
| priv->can.do_set_mode = ti_hecc_do_set_mode; | |
| priv->can.do_get_berr_counter = ti_hecc_get_berr_counter; | |
| priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES; | |
| spin_lock_init(&priv->mbx_lock); | |
| ndev->irq = irq->start; | |
| ndev->flags |= IFF_ECHO; | |
| platform_set_drvdata(pdev, ndev); | |
| SET_NETDEV_DEV(ndev, &pdev->dev); | |
| ndev->netdev_ops = &ti_hecc_netdev_ops; | |
| priv->clk = clk_get(&pdev->dev, "hecc_ck"); | |
| if (IS_ERR(priv->clk)) { | |
| dev_err(&pdev->dev, "No clock available\n"); | |
| err = PTR_ERR(priv->clk); | |
| priv->clk = NULL; | |
| goto probe_exit_candev; | |
| } | |
| priv->can.clock.freq = clk_get_rate(priv->clk); | |
| netif_napi_add(ndev, &priv->napi, ti_hecc_rx_poll, | |
| HECC_DEF_NAPI_WEIGHT); | |
| clk_enable(priv->clk); | |
| err = register_candev(ndev); | |
| if (err) { | |
| dev_err(&pdev->dev, "register_candev() failed\n"); | |
| goto probe_exit_clk; | |
| } | |
| devm_can_led_init(ndev); | |
| dev_info(&pdev->dev, "device registered (reg_base=%p, irq=%u)\n", | |
| priv->base, (u32) ndev->irq); | |
| return 0; | |
| probe_exit_clk: | |
| clk_put(priv->clk); | |
| probe_exit_candev: | |
| free_candev(ndev); | |
| probe_exit_iounmap: | |
| iounmap(addr); | |
| probe_exit_free_region: | |
| release_mem_region(mem->start, resource_size(mem)); | |
| probe_exit: | |
| return err; | |
| } | |
| static int ti_hecc_remove(struct platform_device *pdev) | |
| { | |
| struct resource *res; | |
| struct net_device *ndev = platform_get_drvdata(pdev); | |
| struct ti_hecc_priv *priv = netdev_priv(ndev); | |
| unregister_candev(ndev); | |
| clk_disable(priv->clk); | |
| clk_put(priv->clk); | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| iounmap(priv->base); | |
| release_mem_region(res->start, resource_size(res)); | |
| free_candev(ndev); | |
| return 0; | |
| } | |
| #ifdef CONFIG_PM | |
| static int ti_hecc_suspend(struct platform_device *pdev, pm_message_t state) | |
| { | |
| struct net_device *dev = platform_get_drvdata(pdev); | |
| struct ti_hecc_priv *priv = netdev_priv(dev); | |
| if (netif_running(dev)) { | |
| netif_stop_queue(dev); | |
| netif_device_detach(dev); | |
| } | |
| hecc_set_bit(priv, HECC_CANMC, HECC_CANMC_PDR); | |
| priv->can.state = CAN_STATE_SLEEPING; | |
| clk_disable(priv->clk); | |
| return 0; | |
| } | |
| static int ti_hecc_resume(struct platform_device *pdev) | |
| { | |
| struct net_device *dev = platform_get_drvdata(pdev); | |
| struct ti_hecc_priv *priv = netdev_priv(dev); | |
| clk_enable(priv->clk); | |
| hecc_clear_bit(priv, HECC_CANMC, HECC_CANMC_PDR); | |
| priv->can.state = CAN_STATE_ERROR_ACTIVE; | |
| if (netif_running(dev)) { | |
| netif_device_attach(dev); | |
| netif_start_queue(dev); | |
| } | |
| return 0; | |
| } | |
| #else | |
| #define ti_hecc_suspend NULL | |
| #define ti_hecc_resume NULL | |
| #endif | |
| /* TI HECC netdevice driver: platform driver structure */ | |
| static struct platform_driver ti_hecc_driver = { | |
| .driver = { | |
| .name = DRV_NAME, | |
| }, | |
| .probe = ti_hecc_probe, | |
| .remove = ti_hecc_remove, | |
| .suspend = ti_hecc_suspend, | |
| .resume = ti_hecc_resume, | |
| }; | |
| module_platform_driver(ti_hecc_driver); | |
| MODULE_AUTHOR("Anant Gole <anantgole@ti.com>"); | |
| MODULE_LICENSE("GPL v2"); | |
| MODULE_DESCRIPTION(DRV_DESC); | |
| MODULE_ALIAS("platform:" DRV_NAME); |