| /* | |
| * B53 switch driver main logic | |
| * | |
| * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org> | |
| * Copyright (C) 2016 Florian Fainelli <f.fainelli@gmail.com> | |
| * | |
| * Permission to use, copy, modify, and/or distribute this software for any | |
| * purpose with or without fee is hereby granted, provided that the above | |
| * copyright notice and this permission notice appear in all copies. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES | |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF | |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR | |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES | |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN | |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF | |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/delay.h> | |
| #include <linux/export.h> | |
| #include <linux/gpio.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_data/b53.h> | |
| #include <linux/phy.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/if_bridge.h> | |
| #include <net/dsa.h> | |
| #include <net/switchdev.h> | |
| #include "b53_regs.h" | |
| #include "b53_priv.h" | |
| struct b53_mib_desc { | |
| u8 size; | |
| u8 offset; | |
| const char *name; | |
| }; | |
| /* BCM5365 MIB counters */ | |
| static const struct b53_mib_desc b53_mibs_65[] = { | |
| { 8, 0x00, "TxOctets" }, | |
| { 4, 0x08, "TxDropPkts" }, | |
| { 4, 0x10, "TxBroadcastPkts" }, | |
| { 4, 0x14, "TxMulticastPkts" }, | |
| { 4, 0x18, "TxUnicastPkts" }, | |
| { 4, 0x1c, "TxCollisions" }, | |
| { 4, 0x20, "TxSingleCollision" }, | |
| { 4, 0x24, "TxMultipleCollision" }, | |
| { 4, 0x28, "TxDeferredTransmit" }, | |
| { 4, 0x2c, "TxLateCollision" }, | |
| { 4, 0x30, "TxExcessiveCollision" }, | |
| { 4, 0x38, "TxPausePkts" }, | |
| { 8, 0x44, "RxOctets" }, | |
| { 4, 0x4c, "RxUndersizePkts" }, | |
| { 4, 0x50, "RxPausePkts" }, | |
| { 4, 0x54, "Pkts64Octets" }, | |
| { 4, 0x58, "Pkts65to127Octets" }, | |
| { 4, 0x5c, "Pkts128to255Octets" }, | |
| { 4, 0x60, "Pkts256to511Octets" }, | |
| { 4, 0x64, "Pkts512to1023Octets" }, | |
| { 4, 0x68, "Pkts1024to1522Octets" }, | |
| { 4, 0x6c, "RxOversizePkts" }, | |
| { 4, 0x70, "RxJabbers" }, | |
| { 4, 0x74, "RxAlignmentErrors" }, | |
| { 4, 0x78, "RxFCSErrors" }, | |
| { 8, 0x7c, "RxGoodOctets" }, | |
| { 4, 0x84, "RxDropPkts" }, | |
| { 4, 0x88, "RxUnicastPkts" }, | |
| { 4, 0x8c, "RxMulticastPkts" }, | |
| { 4, 0x90, "RxBroadcastPkts" }, | |
| { 4, 0x94, "RxSAChanges" }, | |
| { 4, 0x98, "RxFragments" }, | |
| }; | |
| #define B53_MIBS_65_SIZE ARRAY_SIZE(b53_mibs_65) | |
| /* BCM63xx MIB counters */ | |
| static const struct b53_mib_desc b53_mibs_63xx[] = { | |
| { 8, 0x00, "TxOctets" }, | |
| { 4, 0x08, "TxDropPkts" }, | |
| { 4, 0x0c, "TxQoSPkts" }, | |
| { 4, 0x10, "TxBroadcastPkts" }, | |
| { 4, 0x14, "TxMulticastPkts" }, | |
| { 4, 0x18, "TxUnicastPkts" }, | |
| { 4, 0x1c, "TxCollisions" }, | |
| { 4, 0x20, "TxSingleCollision" }, | |
| { 4, 0x24, "TxMultipleCollision" }, | |
| { 4, 0x28, "TxDeferredTransmit" }, | |
| { 4, 0x2c, "TxLateCollision" }, | |
| { 4, 0x30, "TxExcessiveCollision" }, | |
| { 4, 0x38, "TxPausePkts" }, | |
| { 8, 0x3c, "TxQoSOctets" }, | |
| { 8, 0x44, "RxOctets" }, | |
| { 4, 0x4c, "RxUndersizePkts" }, | |
| { 4, 0x50, "RxPausePkts" }, | |
| { 4, 0x54, "Pkts64Octets" }, | |
| { 4, 0x58, "Pkts65to127Octets" }, | |
| { 4, 0x5c, "Pkts128to255Octets" }, | |
| { 4, 0x60, "Pkts256to511Octets" }, | |
| { 4, 0x64, "Pkts512to1023Octets" }, | |
| { 4, 0x68, "Pkts1024to1522Octets" }, | |
| { 4, 0x6c, "RxOversizePkts" }, | |
| { 4, 0x70, "RxJabbers" }, | |
| { 4, 0x74, "RxAlignmentErrors" }, | |
| { 4, 0x78, "RxFCSErrors" }, | |
| { 8, 0x7c, "RxGoodOctets" }, | |
| { 4, 0x84, "RxDropPkts" }, | |
| { 4, 0x88, "RxUnicastPkts" }, | |
| { 4, 0x8c, "RxMulticastPkts" }, | |
| { 4, 0x90, "RxBroadcastPkts" }, | |
| { 4, 0x94, "RxSAChanges" }, | |
| { 4, 0x98, "RxFragments" }, | |
| { 4, 0xa0, "RxSymbolErrors" }, | |
| { 4, 0xa4, "RxQoSPkts" }, | |
| { 8, 0xa8, "RxQoSOctets" }, | |
| { 4, 0xb0, "Pkts1523to2047Octets" }, | |
| { 4, 0xb4, "Pkts2048to4095Octets" }, | |
| { 4, 0xb8, "Pkts4096to8191Octets" }, | |
| { 4, 0xbc, "Pkts8192to9728Octets" }, | |
| { 4, 0xc0, "RxDiscarded" }, | |
| }; | |
| #define B53_MIBS_63XX_SIZE ARRAY_SIZE(b53_mibs_63xx) | |
| /* MIB counters */ | |
| static const struct b53_mib_desc b53_mibs[] = { | |
| { 8, 0x00, "TxOctets" }, | |
| { 4, 0x08, "TxDropPkts" }, | |
| { 4, 0x10, "TxBroadcastPkts" }, | |
| { 4, 0x14, "TxMulticastPkts" }, | |
| { 4, 0x18, "TxUnicastPkts" }, | |
| { 4, 0x1c, "TxCollisions" }, | |
| { 4, 0x20, "TxSingleCollision" }, | |
| { 4, 0x24, "TxMultipleCollision" }, | |
| { 4, 0x28, "TxDeferredTransmit" }, | |
| { 4, 0x2c, "TxLateCollision" }, | |
| { 4, 0x30, "TxExcessiveCollision" }, | |
| { 4, 0x38, "TxPausePkts" }, | |
| { 8, 0x50, "RxOctets" }, | |
| { 4, 0x58, "RxUndersizePkts" }, | |
| { 4, 0x5c, "RxPausePkts" }, | |
| { 4, 0x60, "Pkts64Octets" }, | |
| { 4, 0x64, "Pkts65to127Octets" }, | |
| { 4, 0x68, "Pkts128to255Octets" }, | |
| { 4, 0x6c, "Pkts256to511Octets" }, | |
| { 4, 0x70, "Pkts512to1023Octets" }, | |
| { 4, 0x74, "Pkts1024to1522Octets" }, | |
| { 4, 0x78, "RxOversizePkts" }, | |
| { 4, 0x7c, "RxJabbers" }, | |
| { 4, 0x80, "RxAlignmentErrors" }, | |
| { 4, 0x84, "RxFCSErrors" }, | |
| { 8, 0x88, "RxGoodOctets" }, | |
| { 4, 0x90, "RxDropPkts" }, | |
| { 4, 0x94, "RxUnicastPkts" }, | |
| { 4, 0x98, "RxMulticastPkts" }, | |
| { 4, 0x9c, "RxBroadcastPkts" }, | |
| { 4, 0xa0, "RxSAChanges" }, | |
| { 4, 0xa4, "RxFragments" }, | |
| { 4, 0xa8, "RxJumboPkts" }, | |
| { 4, 0xac, "RxSymbolErrors" }, | |
| { 4, 0xc0, "RxDiscarded" }, | |
| }; | |
| #define B53_MIBS_SIZE ARRAY_SIZE(b53_mibs) | |
| static const struct b53_mib_desc b53_mibs_58xx[] = { | |
| { 8, 0x00, "TxOctets" }, | |
| { 4, 0x08, "TxDropPkts" }, | |
| { 4, 0x0c, "TxQPKTQ0" }, | |
| { 4, 0x10, "TxBroadcastPkts" }, | |
| { 4, 0x14, "TxMulticastPkts" }, | |
| { 4, 0x18, "TxUnicastPKts" }, | |
| { 4, 0x1c, "TxCollisions" }, | |
| { 4, 0x20, "TxSingleCollision" }, | |
| { 4, 0x24, "TxMultipleCollision" }, | |
| { 4, 0x28, "TxDeferredCollision" }, | |
| { 4, 0x2c, "TxLateCollision" }, | |
| { 4, 0x30, "TxExcessiveCollision" }, | |
| { 4, 0x34, "TxFrameInDisc" }, | |
| { 4, 0x38, "TxPausePkts" }, | |
| { 4, 0x3c, "TxQPKTQ1" }, | |
| { 4, 0x40, "TxQPKTQ2" }, | |
| { 4, 0x44, "TxQPKTQ3" }, | |
| { 4, 0x48, "TxQPKTQ4" }, | |
| { 4, 0x4c, "TxQPKTQ5" }, | |
| { 8, 0x50, "RxOctets" }, | |
| { 4, 0x58, "RxUndersizePkts" }, | |
| { 4, 0x5c, "RxPausePkts" }, | |
| { 4, 0x60, "RxPkts64Octets" }, | |
| { 4, 0x64, "RxPkts65to127Octets" }, | |
| { 4, 0x68, "RxPkts128to255Octets" }, | |
| { 4, 0x6c, "RxPkts256to511Octets" }, | |
| { 4, 0x70, "RxPkts512to1023Octets" }, | |
| { 4, 0x74, "RxPkts1024toMaxPktsOctets" }, | |
| { 4, 0x78, "RxOversizePkts" }, | |
| { 4, 0x7c, "RxJabbers" }, | |
| { 4, 0x80, "RxAlignmentErrors" }, | |
| { 4, 0x84, "RxFCSErrors" }, | |
| { 8, 0x88, "RxGoodOctets" }, | |
| { 4, 0x90, "RxDropPkts" }, | |
| { 4, 0x94, "RxUnicastPkts" }, | |
| { 4, 0x98, "RxMulticastPkts" }, | |
| { 4, 0x9c, "RxBroadcastPkts" }, | |
| { 4, 0xa0, "RxSAChanges" }, | |
| { 4, 0xa4, "RxFragments" }, | |
| { 4, 0xa8, "RxJumboPkt" }, | |
| { 4, 0xac, "RxSymblErr" }, | |
| { 4, 0xb0, "InRangeErrCount" }, | |
| { 4, 0xb4, "OutRangeErrCount" }, | |
| { 4, 0xb8, "EEELpiEvent" }, | |
| { 4, 0xbc, "EEELpiDuration" }, | |
| { 4, 0xc0, "RxDiscard" }, | |
| { 4, 0xc8, "TxQPKTQ6" }, | |
| { 4, 0xcc, "TxQPKTQ7" }, | |
| { 4, 0xd0, "TxPkts64Octets" }, | |
| { 4, 0xd4, "TxPkts65to127Octets" }, | |
| { 4, 0xd8, "TxPkts128to255Octets" }, | |
| { 4, 0xdc, "TxPkts256to511Ocets" }, | |
| { 4, 0xe0, "TxPkts512to1023Ocets" }, | |
| { 4, 0xe4, "TxPkts1024toMaxPktOcets" }, | |
| }; | |
| #define B53_MIBS_58XX_SIZE ARRAY_SIZE(b53_mibs_58xx) | |
| static int b53_do_vlan_op(struct b53_device *dev, u8 op) | |
| { | |
| unsigned int i; | |
| b53_write8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], VTA_START_CMD | op); | |
| for (i = 0; i < 10; i++) { | |
| u8 vta; | |
| b53_read8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], &vta); | |
| if (!(vta & VTA_START_CMD)) | |
| return 0; | |
| usleep_range(100, 200); | |
| } | |
| return -EIO; | |
| } | |
| static void b53_set_vlan_entry(struct b53_device *dev, u16 vid, | |
| struct b53_vlan *vlan) | |
| { | |
| if (is5325(dev)) { | |
| u32 entry = 0; | |
| if (vlan->members) { | |
| entry = ((vlan->untag & VA_UNTAG_MASK_25) << | |
| VA_UNTAG_S_25) | vlan->members; | |
| if (dev->core_rev >= 3) | |
| entry |= VA_VALID_25_R4 | vid << VA_VID_HIGH_S; | |
| else | |
| entry |= VA_VALID_25; | |
| } | |
| b53_write32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, entry); | |
| b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid | | |
| VTA_RW_STATE_WR | VTA_RW_OP_EN); | |
| } else if (is5365(dev)) { | |
| u16 entry = 0; | |
| if (vlan->members) | |
| entry = ((vlan->untag & VA_UNTAG_MASK_65) << | |
| VA_UNTAG_S_65) | vlan->members | VA_VALID_65; | |
| b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, entry); | |
| b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid | | |
| VTA_RW_STATE_WR | VTA_RW_OP_EN); | |
| } else { | |
| b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid); | |
| b53_write32(dev, B53_ARLIO_PAGE, dev->vta_regs[2], | |
| (vlan->untag << VTE_UNTAG_S) | vlan->members); | |
| b53_do_vlan_op(dev, VTA_CMD_WRITE); | |
| } | |
| dev_dbg(dev->ds->dev, "VID: %d, members: 0x%04x, untag: 0x%04x\n", | |
| vid, vlan->members, vlan->untag); | |
| } | |
| static void b53_get_vlan_entry(struct b53_device *dev, u16 vid, | |
| struct b53_vlan *vlan) | |
| { | |
| if (is5325(dev)) { | |
| u32 entry = 0; | |
| b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid | | |
| VTA_RW_STATE_RD | VTA_RW_OP_EN); | |
| b53_read32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, &entry); | |
| if (dev->core_rev >= 3) | |
| vlan->valid = !!(entry & VA_VALID_25_R4); | |
| else | |
| vlan->valid = !!(entry & VA_VALID_25); | |
| vlan->members = entry & VA_MEMBER_MASK; | |
| vlan->untag = (entry >> VA_UNTAG_S_25) & VA_UNTAG_MASK_25; | |
| } else if (is5365(dev)) { | |
| u16 entry = 0; | |
| b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid | | |
| VTA_RW_STATE_WR | VTA_RW_OP_EN); | |
| b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, &entry); | |
| vlan->valid = !!(entry & VA_VALID_65); | |
| vlan->members = entry & VA_MEMBER_MASK; | |
| vlan->untag = (entry >> VA_UNTAG_S_65) & VA_UNTAG_MASK_65; | |
| } else { | |
| u32 entry = 0; | |
| b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid); | |
| b53_do_vlan_op(dev, VTA_CMD_READ); | |
| b53_read32(dev, B53_ARLIO_PAGE, dev->vta_regs[2], &entry); | |
| vlan->members = entry & VTE_MEMBERS; | |
| vlan->untag = (entry >> VTE_UNTAG_S) & VTE_MEMBERS; | |
| vlan->valid = true; | |
| } | |
| } | |
| static void b53_set_forwarding(struct b53_device *dev, int enable) | |
| { | |
| u8 mgmt; | |
| b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt); | |
| if (enable) | |
| mgmt |= SM_SW_FWD_EN; | |
| else | |
| mgmt &= ~SM_SW_FWD_EN; | |
| b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt); | |
| } | |
| static void b53_enable_vlan(struct b53_device *dev, bool enable) | |
| { | |
| u8 mgmt, vc0, vc1, vc4 = 0, vc5; | |
| b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt); | |
| b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, &vc0); | |
| b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, &vc1); | |
| if (is5325(dev) || is5365(dev)) { | |
| b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4); | |
| b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, &vc5); | |
| } else if (is63xx(dev)) { | |
| b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, &vc4); | |
| b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, &vc5); | |
| } else { | |
| b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, &vc4); | |
| b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, &vc5); | |
| } | |
| mgmt &= ~SM_SW_FWD_MODE; | |
| if (enable) { | |
| vc0 |= VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID; | |
| vc1 |= VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN; | |
| vc4 &= ~VC4_ING_VID_CHECK_MASK; | |
| vc4 |= VC4_ING_VID_VIO_DROP << VC4_ING_VID_CHECK_S; | |
| vc5 |= VC5_DROP_VTABLE_MISS; | |
| if (is5325(dev)) | |
| vc0 &= ~VC0_RESERVED_1; | |
| if (is5325(dev) || is5365(dev)) | |
| vc1 |= VC1_RX_MCST_TAG_EN; | |
| } else { | |
| vc0 &= ~(VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID); | |
| vc1 &= ~(VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN); | |
| vc4 &= ~VC4_ING_VID_CHECK_MASK; | |
| vc5 &= ~VC5_DROP_VTABLE_MISS; | |
| if (is5325(dev) || is5365(dev)) | |
| vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S; | |
| else | |
| vc4 |= VC4_ING_VID_VIO_TO_IMP << VC4_ING_VID_CHECK_S; | |
| if (is5325(dev) || is5365(dev)) | |
| vc1 &= ~VC1_RX_MCST_TAG_EN; | |
| } | |
| if (!is5325(dev) && !is5365(dev)) | |
| vc5 &= ~VC5_VID_FFF_EN; | |
| b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, vc0); | |
| b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, vc1); | |
| if (is5325(dev) || is5365(dev)) { | |
| /* enable the high 8 bit vid check on 5325 */ | |
| if (is5325(dev) && enable) | |
| b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, | |
| VC3_HIGH_8BIT_EN); | |
| else | |
| b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0); | |
| b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, vc4); | |
| b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, vc5); | |
| } else if (is63xx(dev)) { | |
| b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3_63XX, 0); | |
| b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, vc4); | |
| b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, vc5); | |
| } else { | |
| b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0); | |
| b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, vc4); | |
| b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, vc5); | |
| } | |
| b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt); | |
| } | |
| static int b53_set_jumbo(struct b53_device *dev, bool enable, bool allow_10_100) | |
| { | |
| u32 port_mask = 0; | |
| u16 max_size = JMS_MIN_SIZE; | |
| if (is5325(dev) || is5365(dev)) | |
| return -EINVAL; | |
| if (enable) { | |
| port_mask = dev->enabled_ports; | |
| max_size = JMS_MAX_SIZE; | |
| if (allow_10_100) | |
| port_mask |= JPM_10_100_JUMBO_EN; | |
| } | |
| b53_write32(dev, B53_JUMBO_PAGE, dev->jumbo_pm_reg, port_mask); | |
| return b53_write16(dev, B53_JUMBO_PAGE, dev->jumbo_size_reg, max_size); | |
| } | |
| static int b53_flush_arl(struct b53_device *dev, u8 mask) | |
| { | |
| unsigned int i; | |
| b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, | |
| FAST_AGE_DONE | FAST_AGE_DYNAMIC | mask); | |
| for (i = 0; i < 10; i++) { | |
| u8 fast_age_ctrl; | |
| b53_read8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, | |
| &fast_age_ctrl); | |
| if (!(fast_age_ctrl & FAST_AGE_DONE)) | |
| goto out; | |
| msleep(1); | |
| } | |
| return -ETIMEDOUT; | |
| out: | |
| /* Only age dynamic entries (default behavior) */ | |
| b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, FAST_AGE_DYNAMIC); | |
| return 0; | |
| } | |
| static int b53_fast_age_port(struct b53_device *dev, int port) | |
| { | |
| b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_PORT_CTRL, port); | |
| return b53_flush_arl(dev, FAST_AGE_PORT); | |
| } | |
| static int b53_fast_age_vlan(struct b53_device *dev, u16 vid) | |
| { | |
| b53_write16(dev, B53_CTRL_PAGE, B53_FAST_AGE_VID_CTRL, vid); | |
| return b53_flush_arl(dev, FAST_AGE_VLAN); | |
| } | |
| static void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port) | |
| { | |
| struct b53_device *dev = ds->priv; | |
| unsigned int i; | |
| u16 pvlan; | |
| /* Enable the IMP port to be in the same VLAN as the other ports | |
| * on a per-port basis such that we only have Port i and IMP in | |
| * the same VLAN. | |
| */ | |
| b53_for_each_port(dev, i) { | |
| b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &pvlan); | |
| pvlan |= BIT(cpu_port); | |
| b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), pvlan); | |
| } | |
| } | |
| static int b53_enable_port(struct dsa_switch *ds, int port, | |
| struct phy_device *phy) | |
| { | |
| struct b53_device *dev = ds->priv; | |
| unsigned int cpu_port = dev->cpu_port; | |
| u16 pvlan; | |
| /* Clear the Rx and Tx disable bits and set to no spanning tree */ | |
| b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), 0); | |
| /* Set this port, and only this one to be in the default VLAN, | |
| * if member of a bridge, restore its membership prior to | |
| * bringing down this port. | |
| */ | |
| b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan); | |
| pvlan &= ~0x1ff; | |
| pvlan |= BIT(port); | |
| pvlan |= dev->ports[port].vlan_ctl_mask; | |
| b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan); | |
| b53_imp_vlan_setup(ds, cpu_port); | |
| return 0; | |
| } | |
| static void b53_disable_port(struct dsa_switch *ds, int port, | |
| struct phy_device *phy) | |
| { | |
| struct b53_device *dev = ds->priv; | |
| u8 reg; | |
| /* Disable Tx/Rx for the port */ | |
| b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), ®); | |
| reg |= PORT_CTRL_RX_DISABLE | PORT_CTRL_TX_DISABLE; | |
| b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg); | |
| } | |
| static void b53_enable_cpu_port(struct b53_device *dev) | |
| { | |
| unsigned int cpu_port = dev->cpu_port; | |
| u8 port_ctrl; | |
| /* BCM5325 CPU port is at 8 */ | |
| if ((is5325(dev) || is5365(dev)) && cpu_port == B53_CPU_PORT_25) | |
| cpu_port = B53_CPU_PORT; | |
| port_ctrl = PORT_CTRL_RX_BCST_EN | | |
| PORT_CTRL_RX_MCST_EN | | |
| PORT_CTRL_RX_UCST_EN; | |
| b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(cpu_port), port_ctrl); | |
| } | |
| static void b53_enable_mib(struct b53_device *dev) | |
| { | |
| u8 gc; | |
| b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc); | |
| gc &= ~(GC_RESET_MIB | GC_MIB_AC_EN); | |
| b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc); | |
| } | |
| static int b53_configure_vlan(struct b53_device *dev) | |
| { | |
| struct b53_vlan vl = { 0 }; | |
| int i; | |
| /* clear all vlan entries */ | |
| if (is5325(dev) || is5365(dev)) { | |
| for (i = 1; i < dev->num_vlans; i++) | |
| b53_set_vlan_entry(dev, i, &vl); | |
| } else { | |
| b53_do_vlan_op(dev, VTA_CMD_CLEAR); | |
| } | |
| b53_enable_vlan(dev, false); | |
| b53_for_each_port(dev, i) | |
| b53_write16(dev, B53_VLAN_PAGE, | |
| B53_VLAN_PORT_DEF_TAG(i), 1); | |
| if (!is5325(dev) && !is5365(dev)) | |
| b53_set_jumbo(dev, dev->enable_jumbo, false); | |
| return 0; | |
| } | |
| static void b53_switch_reset_gpio(struct b53_device *dev) | |
| { | |
| int gpio = dev->reset_gpio; | |
| if (gpio < 0) | |
| return; | |
| /* Reset sequence: RESET low(50ms)->high(20ms) | |
| */ | |
| gpio_set_value(gpio, 0); | |
| mdelay(50); | |
| gpio_set_value(gpio, 1); | |
| mdelay(20); | |
| dev->current_page = 0xff; | |
| } | |
| static int b53_switch_reset(struct b53_device *dev) | |
| { | |
| u8 mgmt; | |
| b53_switch_reset_gpio(dev); | |
| if (is539x(dev)) { | |
| b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x83); | |
| b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x00); | |
| } | |
| b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt); | |
| if (!(mgmt & SM_SW_FWD_EN)) { | |
| mgmt &= ~SM_SW_FWD_MODE; | |
| mgmt |= SM_SW_FWD_EN; | |
| b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt); | |
| b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt); | |
| if (!(mgmt & SM_SW_FWD_EN)) { | |
| dev_err(dev->dev, "Failed to enable switch!\n"); | |
| return -EINVAL; | |
| } | |
| } | |
| b53_enable_mib(dev); | |
| return b53_flush_arl(dev, FAST_AGE_STATIC); | |
| } | |
| static int b53_phy_read16(struct dsa_switch *ds, int addr, int reg) | |
| { | |
| struct b53_device *priv = ds->priv; | |
| u16 value = 0; | |
| int ret; | |
| if (priv->ops->phy_read16) | |
| ret = priv->ops->phy_read16(priv, addr, reg, &value); | |
| else | |
| ret = b53_read16(priv, B53_PORT_MII_PAGE(addr), | |
| reg * 2, &value); | |
| return ret ? ret : value; | |
| } | |
| static int b53_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val) | |
| { | |
| struct b53_device *priv = ds->priv; | |
| if (priv->ops->phy_write16) | |
| return priv->ops->phy_write16(priv, addr, reg, val); | |
| return b53_write16(priv, B53_PORT_MII_PAGE(addr), reg * 2, val); | |
| } | |
| static int b53_reset_switch(struct b53_device *priv) | |
| { | |
| /* reset vlans */ | |
| priv->enable_jumbo = false; | |
| memset(priv->vlans, 0, sizeof(*priv->vlans) * priv->num_vlans); | |
| memset(priv->ports, 0, sizeof(*priv->ports) * priv->num_ports); | |
| return b53_switch_reset(priv); | |
| } | |
| static int b53_apply_config(struct b53_device *priv) | |
| { | |
| /* disable switching */ | |
| b53_set_forwarding(priv, 0); | |
| b53_configure_vlan(priv); | |
| /* enable switching */ | |
| b53_set_forwarding(priv, 1); | |
| return 0; | |
| } | |
| static void b53_reset_mib(struct b53_device *priv) | |
| { | |
| u8 gc; | |
| b53_read8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc); | |
| b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc | GC_RESET_MIB); | |
| msleep(1); | |
| b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc & ~GC_RESET_MIB); | |
| msleep(1); | |
| } | |
| static const struct b53_mib_desc *b53_get_mib(struct b53_device *dev) | |
| { | |
| if (is5365(dev)) | |
| return b53_mibs_65; | |
| else if (is63xx(dev)) | |
| return b53_mibs_63xx; | |
| else if (is58xx(dev)) | |
| return b53_mibs_58xx; | |
| else | |
| return b53_mibs; | |
| } | |
| static unsigned int b53_get_mib_size(struct b53_device *dev) | |
| { | |
| if (is5365(dev)) | |
| return B53_MIBS_65_SIZE; | |
| else if (is63xx(dev)) | |
| return B53_MIBS_63XX_SIZE; | |
| else if (is58xx(dev)) | |
| return B53_MIBS_58XX_SIZE; | |
| else | |
| return B53_MIBS_SIZE; | |
| } | |
| static void b53_get_strings(struct dsa_switch *ds, int port, uint8_t *data) | |
| { | |
| struct b53_device *dev = ds->priv; | |
| const struct b53_mib_desc *mibs = b53_get_mib(dev); | |
| unsigned int mib_size = b53_get_mib_size(dev); | |
| unsigned int i; | |
| for (i = 0; i < mib_size; i++) | |
| memcpy(data + i * ETH_GSTRING_LEN, | |
| mibs[i].name, ETH_GSTRING_LEN); | |
| } | |
| static void b53_get_ethtool_stats(struct dsa_switch *ds, int port, | |
| uint64_t *data) | |
| { | |
| struct b53_device *dev = ds->priv; | |
| const struct b53_mib_desc *mibs = b53_get_mib(dev); | |
| unsigned int mib_size = b53_get_mib_size(dev); | |
| const struct b53_mib_desc *s; | |
| unsigned int i; | |
| u64 val = 0; | |
| if (is5365(dev) && port == 5) | |
| port = 8; | |
| mutex_lock(&dev->stats_mutex); | |
| for (i = 0; i < mib_size; i++) { | |
| s = &mibs[i]; | |
| if (s->size == 8) { | |
| b53_read64(dev, B53_MIB_PAGE(port), s->offset, &val); | |
| } else { | |
| u32 val32; | |
| b53_read32(dev, B53_MIB_PAGE(port), s->offset, | |
| &val32); | |
| val = val32; | |
| } | |
| data[i] = (u64)val; | |
| } | |
| mutex_unlock(&dev->stats_mutex); | |
| } | |
| static int b53_get_sset_count(struct dsa_switch *ds) | |
| { | |
| struct b53_device *dev = ds->priv; | |
| return b53_get_mib_size(dev); | |
| } | |
| static int b53_setup(struct dsa_switch *ds) | |
| { | |
| struct b53_device *dev = ds->priv; | |
| unsigned int port; | |
| int ret; | |
| ret = b53_reset_switch(dev); | |
| if (ret) { | |
| dev_err(ds->dev, "failed to reset switch\n"); | |
| return ret; | |
| } | |
| b53_reset_mib(dev); | |
| ret = b53_apply_config(dev); | |
| if (ret) | |
| dev_err(ds->dev, "failed to apply configuration\n"); | |
| for (port = 0; port < dev->num_ports; port++) { | |
| if (BIT(port) & ds->enabled_port_mask) | |
| b53_enable_port(ds, port, NULL); | |
| else if (dsa_is_cpu_port(ds, port)) | |
| b53_enable_cpu_port(dev); | |
| else | |
| b53_disable_port(ds, port, NULL); | |
| } | |
| return ret; | |
| } | |
| static void b53_adjust_link(struct dsa_switch *ds, int port, | |
| struct phy_device *phydev) | |
| { | |
| struct b53_device *dev = ds->priv; | |
| u8 rgmii_ctrl = 0, reg = 0, off; | |
| if (!phy_is_pseudo_fixed_link(phydev)) | |
| return; | |
| /* Override the port settings */ | |
| if (port == dev->cpu_port) { | |
| off = B53_PORT_OVERRIDE_CTRL; | |
| reg = PORT_OVERRIDE_EN; | |
| } else { | |
| off = B53_GMII_PORT_OVERRIDE_CTRL(port); | |
| reg = GMII_PO_EN; | |
| } | |
| /* Set the link UP */ | |
| if (phydev->link) | |
| reg |= PORT_OVERRIDE_LINK; | |
| if (phydev->duplex == DUPLEX_FULL) | |
| reg |= PORT_OVERRIDE_FULL_DUPLEX; | |
| switch (phydev->speed) { | |
| case 2000: | |
| reg |= PORT_OVERRIDE_SPEED_2000M; | |
| /* fallthrough */ | |
| case SPEED_1000: | |
| reg |= PORT_OVERRIDE_SPEED_1000M; | |
| break; | |
| case SPEED_100: | |
| reg |= PORT_OVERRIDE_SPEED_100M; | |
| break; | |
| case SPEED_10: | |
| reg |= PORT_OVERRIDE_SPEED_10M; | |
| break; | |
| default: | |
| dev_err(ds->dev, "unknown speed: %d\n", phydev->speed); | |
| return; | |
| } | |
| /* Enable flow control on BCM5301x's CPU port */ | |
| if (is5301x(dev) && port == dev->cpu_port) | |
| reg |= PORT_OVERRIDE_RX_FLOW | PORT_OVERRIDE_TX_FLOW; | |
| if (phydev->pause) { | |
| if (phydev->asym_pause) | |
| reg |= PORT_OVERRIDE_TX_FLOW; | |
| reg |= PORT_OVERRIDE_RX_FLOW; | |
| } | |
| b53_write8(dev, B53_CTRL_PAGE, off, reg); | |
| if (is531x5(dev) && phy_interface_is_rgmii(phydev)) { | |
| if (port == 8) | |
| off = B53_RGMII_CTRL_IMP; | |
| else | |
| off = B53_RGMII_CTRL_P(port); | |
| /* Configure the port RGMII clock delay by DLL disabled and | |
| * tx_clk aligned timing (restoring to reset defaults) | |
| */ | |
| b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl); | |
| rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC | | |
| RGMII_CTRL_TIMING_SEL); | |
| /* PHY_INTERFACE_MODE_RGMII_TXID means TX internal delay, make | |
| * sure that we enable the port TX clock internal delay to | |
| * account for this internal delay that is inserted, otherwise | |
| * the switch won't be able to receive correctly. | |
| * | |
| * PHY_INTERFACE_MODE_RGMII means that we are not introducing | |
| * any delay neither on transmission nor reception, so the | |
| * BCM53125 must also be configured accordingly to account for | |
| * the lack of delay and introduce | |
| * | |
| * The BCM53125 switch has its RX clock and TX clock control | |
| * swapped, hence the reason why we modify the TX clock path in | |
| * the "RGMII" case | |
| */ | |
| if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) | |
| rgmii_ctrl |= RGMII_CTRL_DLL_TXC; | |
| if (phydev->interface == PHY_INTERFACE_MODE_RGMII) | |
| rgmii_ctrl |= RGMII_CTRL_DLL_TXC | RGMII_CTRL_DLL_RXC; | |
| rgmii_ctrl |= RGMII_CTRL_TIMING_SEL; | |
| b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl); | |
| dev_info(ds->dev, "Configured port %d for %s\n", port, | |
| phy_modes(phydev->interface)); | |
| } | |
| /* configure MII port if necessary */ | |
| if (is5325(dev)) { | |
| b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL, | |
| ®); | |
| /* reverse mii needs to be enabled */ | |
| if (!(reg & PORT_OVERRIDE_RV_MII_25)) { | |
| b53_write8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL, | |
| reg | PORT_OVERRIDE_RV_MII_25); | |
| b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL, | |
| ®); | |
| if (!(reg & PORT_OVERRIDE_RV_MII_25)) { | |
| dev_err(ds->dev, | |
| "Failed to enable reverse MII mode\n"); | |
| return; | |
| } | |
| } | |
| } else if (is5301x(dev)) { | |
| if (port != dev->cpu_port) { | |
| u8 po_reg = B53_GMII_PORT_OVERRIDE_CTRL(dev->cpu_port); | |
| u8 gmii_po; | |
| b53_read8(dev, B53_CTRL_PAGE, po_reg, &gmii_po); | |
| gmii_po |= GMII_PO_LINK | | |
| GMII_PO_RX_FLOW | | |
| GMII_PO_TX_FLOW | | |
| GMII_PO_EN | | |
| GMII_PO_SPEED_2000M; | |
| b53_write8(dev, B53_CTRL_PAGE, po_reg, gmii_po); | |
| } | |
| } | |
| } | |
| static int b53_vlan_filtering(struct dsa_switch *ds, int port, | |
| bool vlan_filtering) | |
| { | |
| return 0; | |
| } | |
| static int b53_vlan_prepare(struct dsa_switch *ds, int port, | |
| const struct switchdev_obj_port_vlan *vlan, | |
| struct switchdev_trans *trans) | |
| { | |
| struct b53_device *dev = ds->priv; | |
| if ((is5325(dev) || is5365(dev)) && vlan->vid_begin == 0) | |
| return -EOPNOTSUPP; | |
| if (vlan->vid_end > dev->num_vlans) | |
| return -ERANGE; | |
| b53_enable_vlan(dev, true); | |
| return 0; | |
| } | |
| static void b53_vlan_add(struct dsa_switch *ds, int port, | |
| const struct switchdev_obj_port_vlan *vlan, | |
| struct switchdev_trans *trans) | |
| { | |
| struct b53_device *dev = ds->priv; | |
| bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; | |
| bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID; | |
| unsigned int cpu_port = dev->cpu_port; | |
| struct b53_vlan *vl; | |
| u16 vid; | |
| for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { | |
| vl = &dev->vlans[vid]; | |
| b53_get_vlan_entry(dev, vid, vl); | |
| vl->members |= BIT(port) | BIT(cpu_port); | |
| if (untagged) | |
| vl->untag |= BIT(port); | |
| else | |
| vl->untag &= ~BIT(port); | |
| vl->untag &= ~BIT(cpu_port); | |
| b53_set_vlan_entry(dev, vid, vl); | |
| b53_fast_age_vlan(dev, vid); | |
| } | |
| if (pvid) { | |
| b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), | |
| vlan->vid_end); | |
| b53_fast_age_vlan(dev, vid); | |
| } | |
| } | |
| static int b53_vlan_del(struct dsa_switch *ds, int port, | |
| const struct switchdev_obj_port_vlan *vlan) | |
| { | |
| struct b53_device *dev = ds->priv; | |
| bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; | |
| struct b53_vlan *vl; | |
| u16 vid; | |
| u16 pvid; | |
| b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), &pvid); | |
| for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { | |
| vl = &dev->vlans[vid]; | |
| b53_get_vlan_entry(dev, vid, vl); | |
| vl->members &= ~BIT(port); | |
| if (pvid == vid) { | |
| if (is5325(dev) || is5365(dev)) | |
| pvid = 1; | |
| else | |
| pvid = 0; | |
| } | |
| if (untagged) | |
| vl->untag &= ~(BIT(port)); | |
| b53_set_vlan_entry(dev, vid, vl); | |
| b53_fast_age_vlan(dev, vid); | |
| } | |
| b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), pvid); | |
| b53_fast_age_vlan(dev, pvid); | |
| return 0; | |
| } | |
| static int b53_vlan_dump(struct dsa_switch *ds, int port, | |
| struct switchdev_obj_port_vlan *vlan, | |
| int (*cb)(struct switchdev_obj *obj)) | |
| { | |
| struct b53_device *dev = ds->priv; | |
| u16 vid, vid_start = 0, pvid; | |
| struct b53_vlan *vl; | |
| int err = 0; | |
| if (is5325(dev) || is5365(dev)) | |
| vid_start = 1; | |
| b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), &pvid); | |
| /* Use our software cache for dumps, since we do not have any HW | |
| * operation returning only the used/valid VLANs | |
| */ | |
| for (vid = vid_start; vid < dev->num_vlans; vid++) { | |
| vl = &dev->vlans[vid]; | |
| if (!vl->valid) | |
| continue; | |
| if (!(vl->members & BIT(port))) | |
| continue; | |
| vlan->vid_begin = vlan->vid_end = vid; | |
| vlan->flags = 0; | |
| if (vl->untag & BIT(port)) | |
| vlan->flags |= BRIDGE_VLAN_INFO_UNTAGGED; | |
| if (pvid == vid) | |
| vlan->flags |= BRIDGE_VLAN_INFO_PVID; | |
| err = cb(&vlan->obj); | |
| if (err) | |
| break; | |
| } | |
| return err; | |
| } | |
| /* Address Resolution Logic routines */ | |
| static int b53_arl_op_wait(struct b53_device *dev) | |
| { | |
| unsigned int timeout = 10; | |
| u8 reg; | |
| do { | |
| b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, ®); | |
| if (!(reg & ARLTBL_START_DONE)) | |
| return 0; | |
| usleep_range(1000, 2000); | |
| } while (timeout--); | |
| dev_warn(dev->dev, "timeout waiting for ARL to finish: 0x%02x\n", reg); | |
| return -ETIMEDOUT; | |
| } | |
| static int b53_arl_rw_op(struct b53_device *dev, unsigned int op) | |
| { | |
| u8 reg; | |
| if (op > ARLTBL_RW) | |
| return -EINVAL; | |
| b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, ®); | |
| reg |= ARLTBL_START_DONE; | |
| if (op) | |
| reg |= ARLTBL_RW; | |
| else | |
| reg &= ~ARLTBL_RW; | |
| b53_write8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, reg); | |
| return b53_arl_op_wait(dev); | |
| } | |
| static int b53_arl_read(struct b53_device *dev, u64 mac, | |
| u16 vid, struct b53_arl_entry *ent, u8 *idx, | |
| bool is_valid) | |
| { | |
| unsigned int i; | |
| int ret; | |
| ret = b53_arl_op_wait(dev); | |
| if (ret) | |
| return ret; | |
| /* Read the bins */ | |
| for (i = 0; i < dev->num_arl_entries; i++) { | |
| u64 mac_vid; | |
| u32 fwd_entry; | |
| b53_read64(dev, B53_ARLIO_PAGE, | |
| B53_ARLTBL_MAC_VID_ENTRY(i), &mac_vid); | |
| b53_read32(dev, B53_ARLIO_PAGE, | |
| B53_ARLTBL_DATA_ENTRY(i), &fwd_entry); | |
| b53_arl_to_entry(ent, mac_vid, fwd_entry); | |
| if (!(fwd_entry & ARLTBL_VALID)) | |
| continue; | |
| if ((mac_vid & ARLTBL_MAC_MASK) != mac) | |
| continue; | |
| *idx = i; | |
| } | |
| return -ENOENT; | |
| } | |
| static int b53_arl_op(struct b53_device *dev, int op, int port, | |
| const unsigned char *addr, u16 vid, bool is_valid) | |
| { | |
| struct b53_arl_entry ent; | |
| u32 fwd_entry; | |
| u64 mac, mac_vid = 0; | |
| u8 idx = 0; | |
| int ret; | |
| /* Convert the array into a 64-bit MAC */ | |
| mac = b53_mac_to_u64(addr); | |
| /* Perform a read for the given MAC and VID */ | |
| b53_write48(dev, B53_ARLIO_PAGE, B53_MAC_ADDR_IDX, mac); | |
| b53_write16(dev, B53_ARLIO_PAGE, B53_VLAN_ID_IDX, vid); | |
| /* Issue a read operation for this MAC */ | |
| ret = b53_arl_rw_op(dev, 1); | |
| if (ret) | |
| return ret; | |
| ret = b53_arl_read(dev, mac, vid, &ent, &idx, is_valid); | |
| /* If this is a read, just finish now */ | |
| if (op) | |
| return ret; | |
| /* We could not find a matching MAC, so reset to a new entry */ | |
| if (ret) { | |
| fwd_entry = 0; | |
| idx = 1; | |
| } | |
| memset(&ent, 0, sizeof(ent)); | |
| ent.port = port; | |
| ent.is_valid = is_valid; | |
| ent.vid = vid; | |
| ent.is_static = true; | |
| memcpy(ent.mac, addr, ETH_ALEN); | |
| b53_arl_from_entry(&mac_vid, &fwd_entry, &ent); | |
| b53_write64(dev, B53_ARLIO_PAGE, | |
| B53_ARLTBL_MAC_VID_ENTRY(idx), mac_vid); | |
| b53_write32(dev, B53_ARLIO_PAGE, | |
| B53_ARLTBL_DATA_ENTRY(idx), fwd_entry); | |
| return b53_arl_rw_op(dev, 0); | |
| } | |
| static int b53_fdb_prepare(struct dsa_switch *ds, int port, | |
| const struct switchdev_obj_port_fdb *fdb, | |
| struct switchdev_trans *trans) | |
| { | |
| struct b53_device *priv = ds->priv; | |
| /* 5325 and 5365 require some more massaging, but could | |
| * be supported eventually | |
| */ | |
| if (is5325(priv) || is5365(priv)) | |
| return -EOPNOTSUPP; | |
| return 0; | |
| } | |
| static void b53_fdb_add(struct dsa_switch *ds, int port, | |
| const struct switchdev_obj_port_fdb *fdb, | |
| struct switchdev_trans *trans) | |
| { | |
| struct b53_device *priv = ds->priv; | |
| if (b53_arl_op(priv, 0, port, fdb->addr, fdb->vid, true)) | |
| pr_err("%s: failed to add MAC address\n", __func__); | |
| } | |
| static int b53_fdb_del(struct dsa_switch *ds, int port, | |
| const struct switchdev_obj_port_fdb *fdb) | |
| { | |
| struct b53_device *priv = ds->priv; | |
| return b53_arl_op(priv, 0, port, fdb->addr, fdb->vid, false); | |
| } | |
| static int b53_arl_search_wait(struct b53_device *dev) | |
| { | |
| unsigned int timeout = 1000; | |
| u8 reg; | |
| do { | |
| b53_read8(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, ®); | |
| if (!(reg & ARL_SRCH_STDN)) | |
| return 0; | |
| if (reg & ARL_SRCH_VLID) | |
| return 0; | |
| usleep_range(1000, 2000); | |
| } while (timeout--); | |
| return -ETIMEDOUT; | |
| } | |
| static void b53_arl_search_rd(struct b53_device *dev, u8 idx, | |
| struct b53_arl_entry *ent) | |
| { | |
| u64 mac_vid; | |
| u32 fwd_entry; | |
| b53_read64(dev, B53_ARLIO_PAGE, | |
| B53_ARL_SRCH_RSTL_MACVID(idx), &mac_vid); | |
| b53_read32(dev, B53_ARLIO_PAGE, | |
| B53_ARL_SRCH_RSTL(idx), &fwd_entry); | |
| b53_arl_to_entry(ent, mac_vid, fwd_entry); | |
| } | |
| static int b53_fdb_copy(struct net_device *dev, int port, | |
| const struct b53_arl_entry *ent, | |
| struct switchdev_obj_port_fdb *fdb, | |
| int (*cb)(struct switchdev_obj *obj)) | |
| { | |
| if (!ent->is_valid) | |
| return 0; | |
| if (port != ent->port) | |
| return 0; | |
| ether_addr_copy(fdb->addr, ent->mac); | |
| fdb->vid = ent->vid; | |
| fdb->ndm_state = ent->is_static ? NUD_NOARP : NUD_REACHABLE; | |
| return cb(&fdb->obj); | |
| } | |
| static int b53_fdb_dump(struct dsa_switch *ds, int port, | |
| struct switchdev_obj_port_fdb *fdb, | |
| int (*cb)(struct switchdev_obj *obj)) | |
| { | |
| struct b53_device *priv = ds->priv; | |
| struct net_device *dev = ds->ports[port].netdev; | |
| struct b53_arl_entry results[2]; | |
| unsigned int count = 0; | |
| int ret; | |
| u8 reg; | |
| /* Start search operation */ | |
| reg = ARL_SRCH_STDN; | |
| b53_write8(priv, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, reg); | |
| do { | |
| ret = b53_arl_search_wait(priv); | |
| if (ret) | |
| return ret; | |
| b53_arl_search_rd(priv, 0, &results[0]); | |
| ret = b53_fdb_copy(dev, port, &results[0], fdb, cb); | |
| if (ret) | |
| return ret; | |
| if (priv->num_arl_entries > 2) { | |
| b53_arl_search_rd(priv, 1, &results[1]); | |
| ret = b53_fdb_copy(dev, port, &results[1], fdb, cb); | |
| if (ret) | |
| return ret; | |
| if (!results[0].is_valid && !results[1].is_valid) | |
| break; | |
| } | |
| } while (count++ < 1024); | |
| return 0; | |
| } | |
| static int b53_br_join(struct dsa_switch *ds, int port, | |
| struct net_device *bridge) | |
| { | |
| struct b53_device *dev = ds->priv; | |
| s8 cpu_port = ds->dst->cpu_port; | |
| u16 pvlan, reg; | |
| unsigned int i; | |
| /* Make this port leave the all VLANs join since we will have proper | |
| * VLAN entries from now on | |
| */ | |
| if (is58xx(dev)) { | |
| b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, ®); | |
| reg &= ~BIT(port); | |
| if ((reg & BIT(cpu_port)) == BIT(cpu_port)) | |
| reg &= ~BIT(cpu_port); | |
| b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg); | |
| } | |
| dev->ports[port].bridge_dev = bridge; | |
| b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan); | |
| b53_for_each_port(dev, i) { | |
| if (dev->ports[i].bridge_dev != bridge) | |
| continue; | |
| /* Add this local port to the remote port VLAN control | |
| * membership and update the remote port bitmask | |
| */ | |
| b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), ®); | |
| reg |= BIT(port); | |
| b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg); | |
| dev->ports[i].vlan_ctl_mask = reg; | |
| pvlan |= BIT(i); | |
| } | |
| /* Configure the local port VLAN control membership to include | |
| * remote ports and update the local port bitmask | |
| */ | |
| b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan); | |
| dev->ports[port].vlan_ctl_mask = pvlan; | |
| return 0; | |
| } | |
| static void b53_br_leave(struct dsa_switch *ds, int port) | |
| { | |
| struct b53_device *dev = ds->priv; | |
| struct net_device *bridge = dev->ports[port].bridge_dev; | |
| struct b53_vlan *vl = &dev->vlans[0]; | |
| s8 cpu_port = ds->dst->cpu_port; | |
| unsigned int i; | |
| u16 pvlan, reg, pvid; | |
| b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan); | |
| b53_for_each_port(dev, i) { | |
| /* Don't touch the remaining ports */ | |
| if (dev->ports[i].bridge_dev != bridge) | |
| continue; | |
| b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), ®); | |
| reg &= ~BIT(port); | |
| b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg); | |
| dev->ports[port].vlan_ctl_mask = reg; | |
| /* Prevent self removal to preserve isolation */ | |
| if (port != i) | |
| pvlan &= ~BIT(i); | |
| } | |
| b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan); | |
| dev->ports[port].vlan_ctl_mask = pvlan; | |
| dev->ports[port].bridge_dev = NULL; | |
| if (is5325(dev) || is5365(dev)) | |
| pvid = 1; | |
| else | |
| pvid = 0; | |
| /* Make this port join all VLANs without VLAN entries */ | |
| if (is58xx(dev)) { | |
| b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, ®); | |
| reg |= BIT(port); | |
| if (!(reg & BIT(cpu_port))) | |
| reg |= BIT(cpu_port); | |
| b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg); | |
| } else { | |
| b53_get_vlan_entry(dev, pvid, vl); | |
| vl->members |= BIT(port) | BIT(dev->cpu_port); | |
| vl->untag |= BIT(port) | BIT(dev->cpu_port); | |
| b53_set_vlan_entry(dev, pvid, vl); | |
| } | |
| } | |
| static void b53_br_set_stp_state(struct dsa_switch *ds, int port, u8 state) | |
| { | |
| struct b53_device *dev = ds->priv; | |
| u8 hw_state; | |
| u8 reg; | |
| switch (state) { | |
| case BR_STATE_DISABLED: | |
| hw_state = PORT_CTRL_DIS_STATE; | |
| break; | |
| case BR_STATE_LISTENING: | |
| hw_state = PORT_CTRL_LISTEN_STATE; | |
| break; | |
| case BR_STATE_LEARNING: | |
| hw_state = PORT_CTRL_LEARN_STATE; | |
| break; | |
| case BR_STATE_FORWARDING: | |
| hw_state = PORT_CTRL_FWD_STATE; | |
| break; | |
| case BR_STATE_BLOCKING: | |
| hw_state = PORT_CTRL_BLOCK_STATE; | |
| break; | |
| default: | |
| dev_err(ds->dev, "invalid STP state: %d\n", state); | |
| return; | |
| } | |
| b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), ®); | |
| reg &= ~PORT_CTRL_STP_STATE_MASK; | |
| reg |= hw_state; | |
| b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg); | |
| } | |
| static void b53_br_fast_age(struct dsa_switch *ds, int port) | |
| { | |
| struct b53_device *dev = ds->priv; | |
| if (b53_fast_age_port(dev, port)) | |
| dev_err(ds->dev, "fast ageing failed\n"); | |
| } | |
| static enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds) | |
| { | |
| return DSA_TAG_PROTO_NONE; | |
| } | |
| static struct dsa_switch_ops b53_switch_ops = { | |
| .get_tag_protocol = b53_get_tag_protocol, | |
| .setup = b53_setup, | |
| .get_strings = b53_get_strings, | |
| .get_ethtool_stats = b53_get_ethtool_stats, | |
| .get_sset_count = b53_get_sset_count, | |
| .phy_read = b53_phy_read16, | |
| .phy_write = b53_phy_write16, | |
| .adjust_link = b53_adjust_link, | |
| .port_enable = b53_enable_port, | |
| .port_disable = b53_disable_port, | |
| .port_bridge_join = b53_br_join, | |
| .port_bridge_leave = b53_br_leave, | |
| .port_stp_state_set = b53_br_set_stp_state, | |
| .port_fast_age = b53_br_fast_age, | |
| .port_vlan_filtering = b53_vlan_filtering, | |
| .port_vlan_prepare = b53_vlan_prepare, | |
| .port_vlan_add = b53_vlan_add, | |
| .port_vlan_del = b53_vlan_del, | |
| .port_vlan_dump = b53_vlan_dump, | |
| .port_fdb_prepare = b53_fdb_prepare, | |
| .port_fdb_dump = b53_fdb_dump, | |
| .port_fdb_add = b53_fdb_add, | |
| .port_fdb_del = b53_fdb_del, | |
| }; | |
| struct b53_chip_data { | |
| u32 chip_id; | |
| const char *dev_name; | |
| u16 vlans; | |
| u16 enabled_ports; | |
| u8 cpu_port; | |
| u8 vta_regs[3]; | |
| u8 arl_entries; | |
| u8 duplex_reg; | |
| u8 jumbo_pm_reg; | |
| u8 jumbo_size_reg; | |
| }; | |
| #define B53_VTA_REGS \ | |
| { B53_VT_ACCESS, B53_VT_INDEX, B53_VT_ENTRY } | |
| #define B53_VTA_REGS_9798 \ | |
| { B53_VT_ACCESS_9798, B53_VT_INDEX_9798, B53_VT_ENTRY_9798 } | |
| #define B53_VTA_REGS_63XX \ | |
| { B53_VT_ACCESS_63XX, B53_VT_INDEX_63XX, B53_VT_ENTRY_63XX } | |
| static const struct b53_chip_data b53_switch_chips[] = { | |
| { | |
| .chip_id = BCM5325_DEVICE_ID, | |
| .dev_name = "BCM5325", | |
| .vlans = 16, | |
| .enabled_ports = 0x1f, | |
| .arl_entries = 2, | |
| .cpu_port = B53_CPU_PORT_25, | |
| .duplex_reg = B53_DUPLEX_STAT_FE, | |
| }, | |
| { | |
| .chip_id = BCM5365_DEVICE_ID, | |
| .dev_name = "BCM5365", | |
| .vlans = 256, | |
| .enabled_ports = 0x1f, | |
| .arl_entries = 2, | |
| .cpu_port = B53_CPU_PORT_25, | |
| .duplex_reg = B53_DUPLEX_STAT_FE, | |
| }, | |
| { | |
| .chip_id = BCM5395_DEVICE_ID, | |
| .dev_name = "BCM5395", | |
| .vlans = 4096, | |
| .enabled_ports = 0x1f, | |
| .arl_entries = 4, | |
| .cpu_port = B53_CPU_PORT, | |
| .vta_regs = B53_VTA_REGS, | |
| .duplex_reg = B53_DUPLEX_STAT_GE, | |
| .jumbo_pm_reg = B53_JUMBO_PORT_MASK, | |
| .jumbo_size_reg = B53_JUMBO_MAX_SIZE, | |
| }, | |
| { | |
| .chip_id = BCM5397_DEVICE_ID, | |
| .dev_name = "BCM5397", | |
| .vlans = 4096, | |
| .enabled_ports = 0x1f, | |
| .arl_entries = 4, | |
| .cpu_port = B53_CPU_PORT, | |
| .vta_regs = B53_VTA_REGS_9798, | |
| .duplex_reg = B53_DUPLEX_STAT_GE, | |
| .jumbo_pm_reg = B53_JUMBO_PORT_MASK, | |
| .jumbo_size_reg = B53_JUMBO_MAX_SIZE, | |
| }, | |
| { | |
| .chip_id = BCM5398_DEVICE_ID, | |
| .dev_name = "BCM5398", | |
| .vlans = 4096, | |
| .enabled_ports = 0x7f, | |
| .arl_entries = 4, | |
| .cpu_port = B53_CPU_PORT, | |
| .vta_regs = B53_VTA_REGS_9798, | |
| .duplex_reg = B53_DUPLEX_STAT_GE, | |
| .jumbo_pm_reg = B53_JUMBO_PORT_MASK, | |
| .jumbo_size_reg = B53_JUMBO_MAX_SIZE, | |
| }, | |
| { | |
| .chip_id = BCM53115_DEVICE_ID, | |
| .dev_name = "BCM53115", | |
| .vlans = 4096, | |
| .enabled_ports = 0x1f, | |
| .arl_entries = 4, | |
| .vta_regs = B53_VTA_REGS, | |
| .cpu_port = B53_CPU_PORT, | |
| .duplex_reg = B53_DUPLEX_STAT_GE, | |
| .jumbo_pm_reg = B53_JUMBO_PORT_MASK, | |
| .jumbo_size_reg = B53_JUMBO_MAX_SIZE, | |
| }, | |
| { | |
| .chip_id = BCM53125_DEVICE_ID, | |
| .dev_name = "BCM53125", | |
| .vlans = 4096, | |
| .enabled_ports = 0xff, | |
| .cpu_port = B53_CPU_PORT, | |
| .vta_regs = B53_VTA_REGS, | |
| .duplex_reg = B53_DUPLEX_STAT_GE, | |
| .jumbo_pm_reg = B53_JUMBO_PORT_MASK, | |
| .jumbo_size_reg = B53_JUMBO_MAX_SIZE, | |
| }, | |
| { | |
| .chip_id = BCM53128_DEVICE_ID, | |
| .dev_name = "BCM53128", | |
| .vlans = 4096, | |
| .enabled_ports = 0x1ff, | |
| .arl_entries = 4, | |
| .cpu_port = B53_CPU_PORT, | |
| .vta_regs = B53_VTA_REGS, | |
| .duplex_reg = B53_DUPLEX_STAT_GE, | |
| .jumbo_pm_reg = B53_JUMBO_PORT_MASK, | |
| .jumbo_size_reg = B53_JUMBO_MAX_SIZE, | |
| }, | |
| { | |
| .chip_id = BCM63XX_DEVICE_ID, | |
| .dev_name = "BCM63xx", | |
| .vlans = 4096, | |
| .enabled_ports = 0, /* pdata must provide them */ | |
| .arl_entries = 4, | |
| .cpu_port = B53_CPU_PORT, | |
| .vta_regs = B53_VTA_REGS_63XX, | |
| .duplex_reg = B53_DUPLEX_STAT_63XX, | |
| .jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX, | |
| .jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX, | |
| }, | |
| { | |
| .chip_id = BCM53010_DEVICE_ID, | |
| .dev_name = "BCM53010", | |
| .vlans = 4096, | |
| .enabled_ports = 0x1f, | |
| .arl_entries = 4, | |
| .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ | |
| .vta_regs = B53_VTA_REGS, | |
| .duplex_reg = B53_DUPLEX_STAT_GE, | |
| .jumbo_pm_reg = B53_JUMBO_PORT_MASK, | |
| .jumbo_size_reg = B53_JUMBO_MAX_SIZE, | |
| }, | |
| { | |
| .chip_id = BCM53011_DEVICE_ID, | |
| .dev_name = "BCM53011", | |
| .vlans = 4096, | |
| .enabled_ports = 0x1bf, | |
| .arl_entries = 4, | |
| .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ | |
| .vta_regs = B53_VTA_REGS, | |
| .duplex_reg = B53_DUPLEX_STAT_GE, | |
| .jumbo_pm_reg = B53_JUMBO_PORT_MASK, | |
| .jumbo_size_reg = B53_JUMBO_MAX_SIZE, | |
| }, | |
| { | |
| .chip_id = BCM53012_DEVICE_ID, | |
| .dev_name = "BCM53012", | |
| .vlans = 4096, | |
| .enabled_ports = 0x1bf, | |
| .arl_entries = 4, | |
| .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ | |
| .vta_regs = B53_VTA_REGS, | |
| .duplex_reg = B53_DUPLEX_STAT_GE, | |
| .jumbo_pm_reg = B53_JUMBO_PORT_MASK, | |
| .jumbo_size_reg = B53_JUMBO_MAX_SIZE, | |
| }, | |
| { | |
| .chip_id = BCM53018_DEVICE_ID, | |
| .dev_name = "BCM53018", | |
| .vlans = 4096, | |
| .enabled_ports = 0x1f, | |
| .arl_entries = 4, | |
| .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ | |
| .vta_regs = B53_VTA_REGS, | |
| .duplex_reg = B53_DUPLEX_STAT_GE, | |
| .jumbo_pm_reg = B53_JUMBO_PORT_MASK, | |
| .jumbo_size_reg = B53_JUMBO_MAX_SIZE, | |
| }, | |
| { | |
| .chip_id = BCM53019_DEVICE_ID, | |
| .dev_name = "BCM53019", | |
| .vlans = 4096, | |
| .enabled_ports = 0x1f, | |
| .arl_entries = 4, | |
| .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ | |
| .vta_regs = B53_VTA_REGS, | |
| .duplex_reg = B53_DUPLEX_STAT_GE, | |
| .jumbo_pm_reg = B53_JUMBO_PORT_MASK, | |
| .jumbo_size_reg = B53_JUMBO_MAX_SIZE, | |
| }, | |
| { | |
| .chip_id = BCM58XX_DEVICE_ID, | |
| .dev_name = "BCM585xx/586xx/88312", | |
| .vlans = 4096, | |
| .enabled_ports = 0x1ff, | |
| .arl_entries = 4, | |
| .cpu_port = B53_CPU_PORT_25, | |
| .vta_regs = B53_VTA_REGS, | |
| .duplex_reg = B53_DUPLEX_STAT_GE, | |
| .jumbo_pm_reg = B53_JUMBO_PORT_MASK, | |
| .jumbo_size_reg = B53_JUMBO_MAX_SIZE, | |
| }, | |
| { | |
| .chip_id = BCM7445_DEVICE_ID, | |
| .dev_name = "BCM7445", | |
| .vlans = 4096, | |
| .enabled_ports = 0x1ff, | |
| .arl_entries = 4, | |
| .cpu_port = B53_CPU_PORT, | |
| .vta_regs = B53_VTA_REGS, | |
| .duplex_reg = B53_DUPLEX_STAT_GE, | |
| .jumbo_pm_reg = B53_JUMBO_PORT_MASK, | |
| .jumbo_size_reg = B53_JUMBO_MAX_SIZE, | |
| }, | |
| }; | |
| static int b53_switch_init(struct b53_device *dev) | |
| { | |
| unsigned int i; | |
| int ret; | |
| for (i = 0; i < ARRAY_SIZE(b53_switch_chips); i++) { | |
| const struct b53_chip_data *chip = &b53_switch_chips[i]; | |
| if (chip->chip_id == dev->chip_id) { | |
| if (!dev->enabled_ports) | |
| dev->enabled_ports = chip->enabled_ports; | |
| dev->name = chip->dev_name; | |
| dev->duplex_reg = chip->duplex_reg; | |
| dev->vta_regs[0] = chip->vta_regs[0]; | |
| dev->vta_regs[1] = chip->vta_regs[1]; | |
| dev->vta_regs[2] = chip->vta_regs[2]; | |
| dev->jumbo_pm_reg = chip->jumbo_pm_reg; | |
| dev->cpu_port = chip->cpu_port; | |
| dev->num_vlans = chip->vlans; | |
| dev->num_arl_entries = chip->arl_entries; | |
| break; | |
| } | |
| } | |
| /* check which BCM5325x version we have */ | |
| if (is5325(dev)) { | |
| u8 vc4; | |
| b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4); | |
| /* check reserved bits */ | |
| switch (vc4 & 3) { | |
| case 1: | |
| /* BCM5325E */ | |
| break; | |
| case 3: | |
| /* BCM5325F - do not use port 4 */ | |
| dev->enabled_ports &= ~BIT(4); | |
| break; | |
| default: | |
| /* On the BCM47XX SoCs this is the supported internal switch.*/ | |
| #ifndef CONFIG_BCM47XX | |
| /* BCM5325M */ | |
| return -EINVAL; | |
| #else | |
| break; | |
| #endif | |
| } | |
| } else if (dev->chip_id == BCM53115_DEVICE_ID) { | |
| u64 strap_value; | |
| b53_read48(dev, B53_STAT_PAGE, B53_STRAP_VALUE, &strap_value); | |
| /* use second IMP port if GMII is enabled */ | |
| if (strap_value & SV_GMII_CTRL_115) | |
| dev->cpu_port = 5; | |
| } | |
| /* cpu port is always last */ | |
| dev->num_ports = dev->cpu_port + 1; | |
| dev->enabled_ports |= BIT(dev->cpu_port); | |
| dev->ports = devm_kzalloc(dev->dev, | |
| sizeof(struct b53_port) * dev->num_ports, | |
| GFP_KERNEL); | |
| if (!dev->ports) | |
| return -ENOMEM; | |
| dev->vlans = devm_kzalloc(dev->dev, | |
| sizeof(struct b53_vlan) * dev->num_vlans, | |
| GFP_KERNEL); | |
| if (!dev->vlans) | |
| return -ENOMEM; | |
| dev->reset_gpio = b53_switch_get_reset_gpio(dev); | |
| if (dev->reset_gpio >= 0) { | |
| ret = devm_gpio_request_one(dev->dev, dev->reset_gpio, | |
| GPIOF_OUT_INIT_HIGH, "robo_reset"); | |
| if (ret) | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| struct b53_device *b53_switch_alloc(struct device *base, | |
| const struct b53_io_ops *ops, | |
| void *priv) | |
| { | |
| struct dsa_switch *ds; | |
| struct b53_device *dev; | |
| ds = devm_kzalloc(base, sizeof(*ds) + sizeof(*dev), GFP_KERNEL); | |
| if (!ds) | |
| return NULL; | |
| dev = (struct b53_device *)(ds + 1); | |
| ds->priv = dev; | |
| ds->dev = base; | |
| dev->dev = base; | |
| dev->ds = ds; | |
| dev->priv = priv; | |
| dev->ops = ops; | |
| ds->ops = &b53_switch_ops; | |
| mutex_init(&dev->reg_mutex); | |
| mutex_init(&dev->stats_mutex); | |
| return dev; | |
| } | |
| EXPORT_SYMBOL(b53_switch_alloc); | |
| int b53_switch_detect(struct b53_device *dev) | |
| { | |
| u32 id32; | |
| u16 tmp; | |
| u8 id8; | |
| int ret; | |
| ret = b53_read8(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id8); | |
| if (ret) | |
| return ret; | |
| switch (id8) { | |
| case 0: | |
| /* BCM5325 and BCM5365 do not have this register so reads | |
| * return 0. But the read operation did succeed, so assume this | |
| * is one of them. | |
| * | |
| * Next check if we can write to the 5325's VTA register; for | |
| * 5365 it is read only. | |
| */ | |
| b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, 0xf); | |
| b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, &tmp); | |
| if (tmp == 0xf) | |
| dev->chip_id = BCM5325_DEVICE_ID; | |
| else | |
| dev->chip_id = BCM5365_DEVICE_ID; | |
| break; | |
| case BCM5395_DEVICE_ID: | |
| case BCM5397_DEVICE_ID: | |
| case BCM5398_DEVICE_ID: | |
| dev->chip_id = id8; | |
| break; | |
| default: | |
| ret = b53_read32(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id32); | |
| if (ret) | |
| return ret; | |
| switch (id32) { | |
| case BCM53115_DEVICE_ID: | |
| case BCM53125_DEVICE_ID: | |
| case BCM53128_DEVICE_ID: | |
| case BCM53010_DEVICE_ID: | |
| case BCM53011_DEVICE_ID: | |
| case BCM53012_DEVICE_ID: | |
| case BCM53018_DEVICE_ID: | |
| case BCM53019_DEVICE_ID: | |
| dev->chip_id = id32; | |
| break; | |
| default: | |
| pr_err("unsupported switch detected (BCM53%02x/BCM%x)\n", | |
| id8, id32); | |
| return -ENODEV; | |
| } | |
| } | |
| if (dev->chip_id == BCM5325_DEVICE_ID) | |
| return b53_read8(dev, B53_STAT_PAGE, B53_REV_ID_25, | |
| &dev->core_rev); | |
| else | |
| return b53_read8(dev, B53_MGMT_PAGE, B53_REV_ID, | |
| &dev->core_rev); | |
| } | |
| EXPORT_SYMBOL(b53_switch_detect); | |
| int b53_switch_register(struct b53_device *dev) | |
| { | |
| int ret; | |
| if (dev->pdata) { | |
| dev->chip_id = dev->pdata->chip_id; | |
| dev->enabled_ports = dev->pdata->enabled_ports; | |
| } | |
| if (!dev->chip_id && b53_switch_detect(dev)) | |
| return -EINVAL; | |
| ret = b53_switch_init(dev); | |
| if (ret) | |
| return ret; | |
| pr_info("found switch: %s, rev %i\n", dev->name, dev->core_rev); | |
| return dsa_register_switch(dev->ds, dev->ds->dev->of_node); | |
| } | |
| EXPORT_SYMBOL(b53_switch_register); | |
| MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>"); | |
| MODULE_DESCRIPTION("B53 switch library"); | |
| MODULE_LICENSE("Dual BSD/GPL"); |