| /* | |
| * Blackfin On-Chip MAC Driver | |
| * | |
| * Copyright 2004-2010 Analog Devices Inc. | |
| * | |
| * Enter bugs at http://blackfin.uclinux.org/ | |
| * | |
| * Licensed under the GPL-2 or later. | |
| */ | |
| #define DRV_VERSION "1.1" | |
| #define DRV_DESC "Blackfin on-chip Ethernet MAC driver" | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/sched.h> | |
| #include <linux/slab.h> | |
| #include <linux/delay.h> | |
| #include <linux/timer.h> | |
| #include <linux/errno.h> | |
| #include <linux/irq.h> | |
| #include <linux/io.h> | |
| #include <linux/ioport.h> | |
| #include <linux/crc32.h> | |
| #include <linux/device.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/mii.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/ethtool.h> | |
| #include <linux/skbuff.h> | |
| #include <linux/platform_device.h> | |
| #include <asm/dma.h> | |
| #include <linux/dma-mapping.h> | |
| #include <asm/div64.h> | |
| #include <asm/dpmc.h> | |
| #include <asm/blackfin.h> | |
| #include <asm/cacheflush.h> | |
| #include <asm/portmux.h> | |
| #include <mach/pll.h> | |
| #include "bfin_mac.h" | |
| MODULE_AUTHOR("Bryan Wu, Luke Yang"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_DESCRIPTION(DRV_DESC); | |
| MODULE_ALIAS("platform:bfin_mac"); | |
| #if defined(CONFIG_BFIN_MAC_USE_L1) | |
| # define bfin_mac_alloc(dma_handle, size, num) l1_data_sram_zalloc(size*num) | |
| # define bfin_mac_free(dma_handle, ptr, num) l1_data_sram_free(ptr) | |
| #else | |
| # define bfin_mac_alloc(dma_handle, size, num) \ | |
| dma_alloc_coherent(NULL, size*num, dma_handle, GFP_KERNEL) | |
| # define bfin_mac_free(dma_handle, ptr, num) \ | |
| dma_free_coherent(NULL, sizeof(*ptr)*num, ptr, dma_handle) | |
| #endif | |
| #define PKT_BUF_SZ 1580 | |
| #define MAX_TIMEOUT_CNT 500 | |
| /* pointers to maintain transmit list */ | |
| static struct net_dma_desc_tx *tx_list_head; | |
| static struct net_dma_desc_tx *tx_list_tail; | |
| static struct net_dma_desc_rx *rx_list_head; | |
| static struct net_dma_desc_rx *rx_list_tail; | |
| static struct net_dma_desc_rx *current_rx_ptr; | |
| static struct net_dma_desc_tx *current_tx_ptr; | |
| static struct net_dma_desc_tx *tx_desc; | |
| static struct net_dma_desc_rx *rx_desc; | |
| static void desc_list_free(void) | |
| { | |
| struct net_dma_desc_rx *r; | |
| struct net_dma_desc_tx *t; | |
| int i; | |
| #if !defined(CONFIG_BFIN_MAC_USE_L1) | |
| dma_addr_t dma_handle = 0; | |
| #endif | |
| if (tx_desc) { | |
| t = tx_list_head; | |
| for (i = 0; i < CONFIG_BFIN_TX_DESC_NUM; i++) { | |
| if (t) { | |
| if (t->skb) { | |
| dev_kfree_skb(t->skb); | |
| t->skb = NULL; | |
| } | |
| t = t->next; | |
| } | |
| } | |
| bfin_mac_free(dma_handle, tx_desc, CONFIG_BFIN_TX_DESC_NUM); | |
| } | |
| if (rx_desc) { | |
| r = rx_list_head; | |
| for (i = 0; i < CONFIG_BFIN_RX_DESC_NUM; i++) { | |
| if (r) { | |
| if (r->skb) { | |
| dev_kfree_skb(r->skb); | |
| r->skb = NULL; | |
| } | |
| r = r->next; | |
| } | |
| } | |
| bfin_mac_free(dma_handle, rx_desc, CONFIG_BFIN_RX_DESC_NUM); | |
| } | |
| } | |
| static int desc_list_init(struct net_device *dev) | |
| { | |
| int i; | |
| struct sk_buff *new_skb; | |
| #if !defined(CONFIG_BFIN_MAC_USE_L1) | |
| /* | |
| * This dma_handle is useless in Blackfin dma_alloc_coherent(). | |
| * The real dma handler is the return value of dma_alloc_coherent(). | |
| */ | |
| dma_addr_t dma_handle; | |
| #endif | |
| tx_desc = bfin_mac_alloc(&dma_handle, | |
| sizeof(struct net_dma_desc_tx), | |
| CONFIG_BFIN_TX_DESC_NUM); | |
| if (tx_desc == NULL) | |
| goto init_error; | |
| rx_desc = bfin_mac_alloc(&dma_handle, | |
| sizeof(struct net_dma_desc_rx), | |
| CONFIG_BFIN_RX_DESC_NUM); | |
| if (rx_desc == NULL) | |
| goto init_error; | |
| /* init tx_list */ | |
| tx_list_head = tx_list_tail = tx_desc; | |
| for (i = 0; i < CONFIG_BFIN_TX_DESC_NUM; i++) { | |
| struct net_dma_desc_tx *t = tx_desc + i; | |
| struct dma_descriptor *a = &(t->desc_a); | |
| struct dma_descriptor *b = &(t->desc_b); | |
| /* | |
| * disable DMA | |
| * read from memory WNR = 0 | |
| * wordsize is 32 bits | |
| * 6 half words is desc size | |
| * large desc flow | |
| */ | |
| a->config = WDSIZE_32 | NDSIZE_6 | DMAFLOW_LARGE; | |
| a->start_addr = (unsigned long)t->packet; | |
| a->x_count = 0; | |
| a->next_dma_desc = b; | |
| /* | |
| * enabled DMA | |
| * write to memory WNR = 1 | |
| * wordsize is 32 bits | |
| * disable interrupt | |
| * 6 half words is desc size | |
| * large desc flow | |
| */ | |
| b->config = DMAEN | WNR | WDSIZE_32 | NDSIZE_6 | DMAFLOW_LARGE; | |
| b->start_addr = (unsigned long)(&(t->status)); | |
| b->x_count = 0; | |
| t->skb = NULL; | |
| tx_list_tail->desc_b.next_dma_desc = a; | |
| tx_list_tail->next = t; | |
| tx_list_tail = t; | |
| } | |
| tx_list_tail->next = tx_list_head; /* tx_list is a circle */ | |
| tx_list_tail->desc_b.next_dma_desc = &(tx_list_head->desc_a); | |
| current_tx_ptr = tx_list_head; | |
| /* init rx_list */ | |
| rx_list_head = rx_list_tail = rx_desc; | |
| for (i = 0; i < CONFIG_BFIN_RX_DESC_NUM; i++) { | |
| struct net_dma_desc_rx *r = rx_desc + i; | |
| struct dma_descriptor *a = &(r->desc_a); | |
| struct dma_descriptor *b = &(r->desc_b); | |
| /* allocate a new skb for next time receive */ | |
| new_skb = netdev_alloc_skb(dev, PKT_BUF_SZ + NET_IP_ALIGN); | |
| if (!new_skb) | |
| goto init_error; | |
| skb_reserve(new_skb, NET_IP_ALIGN); | |
| /* Invalidate the data cache of skb->data range when it is write back | |
| * cache. It will prevent overwriting the new data from DMA | |
| */ | |
| blackfin_dcache_invalidate_range((unsigned long)new_skb->head, | |
| (unsigned long)new_skb->end); | |
| r->skb = new_skb; | |
| /* | |
| * enabled DMA | |
| * write to memory WNR = 1 | |
| * wordsize is 32 bits | |
| * disable interrupt | |
| * 6 half words is desc size | |
| * large desc flow | |
| */ | |
| a->config = DMAEN | WNR | WDSIZE_32 | NDSIZE_6 | DMAFLOW_LARGE; | |
| /* since RXDWA is enabled */ | |
| a->start_addr = (unsigned long)new_skb->data - 2; | |
| a->x_count = 0; | |
| a->next_dma_desc = b; | |
| /* | |
| * enabled DMA | |
| * write to memory WNR = 1 | |
| * wordsize is 32 bits | |
| * enable interrupt | |
| * 6 half words is desc size | |
| * large desc flow | |
| */ | |
| b->config = DMAEN | WNR | WDSIZE_32 | DI_EN | | |
| NDSIZE_6 | DMAFLOW_LARGE; | |
| b->start_addr = (unsigned long)(&(r->status)); | |
| b->x_count = 0; | |
| rx_list_tail->desc_b.next_dma_desc = a; | |
| rx_list_tail->next = r; | |
| rx_list_tail = r; | |
| } | |
| rx_list_tail->next = rx_list_head; /* rx_list is a circle */ | |
| rx_list_tail->desc_b.next_dma_desc = &(rx_list_head->desc_a); | |
| current_rx_ptr = rx_list_head; | |
| return 0; | |
| init_error: | |
| desc_list_free(); | |
| pr_err("kmalloc failed\n"); | |
| return -ENOMEM; | |
| } | |
| /*---PHY CONTROL AND CONFIGURATION-----------------------------------------*/ | |
| /* | |
| * MII operations | |
| */ | |
| /* Wait until the previous MDC/MDIO transaction has completed */ | |
| static int bfin_mdio_poll(void) | |
| { | |
| int timeout_cnt = MAX_TIMEOUT_CNT; | |
| /* poll the STABUSY bit */ | |
| while ((bfin_read_EMAC_STAADD()) & STABUSY) { | |
| udelay(1); | |
| if (timeout_cnt-- < 0) { | |
| pr_err("wait MDC/MDIO transaction to complete timeout\n"); | |
| return -ETIMEDOUT; | |
| } | |
| } | |
| return 0; | |
| } | |
| /* Read an off-chip register in a PHY through the MDC/MDIO port */ | |
| static int bfin_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum) | |
| { | |
| int ret; | |
| ret = bfin_mdio_poll(); | |
| if (ret) | |
| return ret; | |
| /* read mode */ | |
| bfin_write_EMAC_STAADD(SET_PHYAD((u16) phy_addr) | | |
| SET_REGAD((u16) regnum) | | |
| STABUSY); | |
| ret = bfin_mdio_poll(); | |
| if (ret) | |
| return ret; | |
| return (int) bfin_read_EMAC_STADAT(); | |
| } | |
| /* Write an off-chip register in a PHY through the MDC/MDIO port */ | |
| static int bfin_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, | |
| u16 value) | |
| { | |
| int ret; | |
| ret = bfin_mdio_poll(); | |
| if (ret) | |
| return ret; | |
| bfin_write_EMAC_STADAT((u32) value); | |
| /* write mode */ | |
| bfin_write_EMAC_STAADD(SET_PHYAD((u16) phy_addr) | | |
| SET_REGAD((u16) regnum) | | |
| STAOP | | |
| STABUSY); | |
| return bfin_mdio_poll(); | |
| } | |
| static void bfin_mac_adjust_link(struct net_device *dev) | |
| { | |
| struct bfin_mac_local *lp = netdev_priv(dev); | |
| struct phy_device *phydev = dev->phydev; | |
| unsigned long flags; | |
| int new_state = 0; | |
| spin_lock_irqsave(&lp->lock, flags); | |
| if (phydev->link) { | |
| /* Now we make sure that we can be in full duplex mode. | |
| * If not, we operate in half-duplex mode. */ | |
| if (phydev->duplex != lp->old_duplex) { | |
| u32 opmode = bfin_read_EMAC_OPMODE(); | |
| new_state = 1; | |
| if (phydev->duplex) | |
| opmode |= FDMODE; | |
| else | |
| opmode &= ~(FDMODE); | |
| bfin_write_EMAC_OPMODE(opmode); | |
| lp->old_duplex = phydev->duplex; | |
| } | |
| if (phydev->speed != lp->old_speed) { | |
| if (phydev->interface == PHY_INTERFACE_MODE_RMII) { | |
| u32 opmode = bfin_read_EMAC_OPMODE(); | |
| switch (phydev->speed) { | |
| case 10: | |
| opmode |= RMII_10; | |
| break; | |
| case 100: | |
| opmode &= ~RMII_10; | |
| break; | |
| default: | |
| netdev_warn(dev, | |
| "Ack! Speed (%d) is not 10/100!\n", | |
| phydev->speed); | |
| break; | |
| } | |
| bfin_write_EMAC_OPMODE(opmode); | |
| } | |
| new_state = 1; | |
| lp->old_speed = phydev->speed; | |
| } | |
| if (!lp->old_link) { | |
| new_state = 1; | |
| lp->old_link = 1; | |
| } | |
| } else if (lp->old_link) { | |
| new_state = 1; | |
| lp->old_link = 0; | |
| lp->old_speed = 0; | |
| lp->old_duplex = -1; | |
| } | |
| if (new_state) { | |
| u32 opmode = bfin_read_EMAC_OPMODE(); | |
| phy_print_status(phydev); | |
| pr_debug("EMAC_OPMODE = 0x%08x\n", opmode); | |
| } | |
| spin_unlock_irqrestore(&lp->lock, flags); | |
| } | |
| /* MDC = 2.5 MHz */ | |
| #define MDC_CLK 2500000 | |
| static int mii_probe(struct net_device *dev, int phy_mode) | |
| { | |
| struct bfin_mac_local *lp = netdev_priv(dev); | |
| struct phy_device *phydev; | |
| unsigned short sysctl; | |
| u32 sclk, mdc_div; | |
| /* Enable PHY output early */ | |
| if (!(bfin_read_VR_CTL() & CLKBUFOE)) | |
| bfin_write_VR_CTL(bfin_read_VR_CTL() | CLKBUFOE); | |
| sclk = get_sclk(); | |
| mdc_div = ((sclk / MDC_CLK) / 2) - 1; | |
| sysctl = bfin_read_EMAC_SYSCTL(); | |
| sysctl = (sysctl & ~MDCDIV) | SET_MDCDIV(mdc_div); | |
| bfin_write_EMAC_SYSCTL(sysctl); | |
| phydev = phy_find_first(lp->mii_bus); | |
| if (!phydev) { | |
| netdev_err(dev, "no phy device found\n"); | |
| return -ENODEV; | |
| } | |
| if (phy_mode != PHY_INTERFACE_MODE_RMII && | |
| phy_mode != PHY_INTERFACE_MODE_MII) { | |
| netdev_err(dev, "invalid phy interface mode\n"); | |
| return -EINVAL; | |
| } | |
| phydev = phy_connect(dev, phydev_name(phydev), | |
| &bfin_mac_adjust_link, phy_mode); | |
| if (IS_ERR(phydev)) { | |
| netdev_err(dev, "could not attach PHY\n"); | |
| return PTR_ERR(phydev); | |
| } | |
| /* mask with MAC supported features */ | |
| phydev->supported &= (SUPPORTED_10baseT_Half | |
| | SUPPORTED_10baseT_Full | |
| | SUPPORTED_100baseT_Half | |
| | SUPPORTED_100baseT_Full | |
| | SUPPORTED_Autoneg | |
| | SUPPORTED_Pause | SUPPORTED_Asym_Pause | |
| | SUPPORTED_MII | |
| | SUPPORTED_TP); | |
| phydev->advertising = phydev->supported; | |
| lp->old_link = 0; | |
| lp->old_speed = 0; | |
| lp->old_duplex = -1; | |
| phy_attached_print(phydev, "mdc_clk=%dHz(mdc_div=%d)@sclk=%dMHz)\n", | |
| MDC_CLK, mdc_div, sclk / 1000000); | |
| return 0; | |
| } | |
| /* | |
| * Ethtool support | |
| */ | |
| /* | |
| * interrupt routine for magic packet wakeup | |
| */ | |
| static irqreturn_t bfin_mac_wake_interrupt(int irq, void *dev_id) | |
| { | |
| return IRQ_HANDLED; | |
| } | |
| static void bfin_mac_ethtool_getdrvinfo(struct net_device *dev, | |
| struct ethtool_drvinfo *info) | |
| { | |
| strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver)); | |
| strlcpy(info->version, DRV_VERSION, sizeof(info->version)); | |
| strlcpy(info->fw_version, "N/A", sizeof(info->fw_version)); | |
| strlcpy(info->bus_info, dev_name(&dev->dev), sizeof(info->bus_info)); | |
| } | |
| static void bfin_mac_ethtool_getwol(struct net_device *dev, | |
| struct ethtool_wolinfo *wolinfo) | |
| { | |
| struct bfin_mac_local *lp = netdev_priv(dev); | |
| wolinfo->supported = WAKE_MAGIC; | |
| wolinfo->wolopts = lp->wol; | |
| } | |
| static int bfin_mac_ethtool_setwol(struct net_device *dev, | |
| struct ethtool_wolinfo *wolinfo) | |
| { | |
| struct bfin_mac_local *lp = netdev_priv(dev); | |
| int rc; | |
| if (wolinfo->wolopts & (WAKE_MAGICSECURE | | |
| WAKE_UCAST | | |
| WAKE_MCAST | | |
| WAKE_BCAST | | |
| WAKE_ARP)) | |
| return -EOPNOTSUPP; | |
| lp->wol = wolinfo->wolopts; | |
| if (lp->wol && !lp->irq_wake_requested) { | |
| /* register wake irq handler */ | |
| rc = request_irq(IRQ_MAC_WAKEDET, bfin_mac_wake_interrupt, | |
| 0, "EMAC_WAKE", dev); | |
| if (rc) | |
| return rc; | |
| lp->irq_wake_requested = true; | |
| } | |
| if (!lp->wol && lp->irq_wake_requested) { | |
| free_irq(IRQ_MAC_WAKEDET, dev); | |
| lp->irq_wake_requested = false; | |
| } | |
| /* Make sure the PHY driver doesn't suspend */ | |
| device_init_wakeup(&dev->dev, lp->wol); | |
| return 0; | |
| } | |
| #ifdef CONFIG_BFIN_MAC_USE_HWSTAMP | |
| static int bfin_mac_ethtool_get_ts_info(struct net_device *dev, | |
| struct ethtool_ts_info *info) | |
| { | |
| struct bfin_mac_local *lp = netdev_priv(dev); | |
| info->so_timestamping = | |
| SOF_TIMESTAMPING_TX_HARDWARE | | |
| SOF_TIMESTAMPING_RX_HARDWARE | | |
| SOF_TIMESTAMPING_RAW_HARDWARE; | |
| info->phc_index = lp->phc_index; | |
| info->tx_types = | |
| (1 << HWTSTAMP_TX_OFF) | | |
| (1 << HWTSTAMP_TX_ON); | |
| info->rx_filters = | |
| (1 << HWTSTAMP_FILTER_NONE) | | |
| (1 << HWTSTAMP_FILTER_PTP_V1_L4_EVENT) | | |
| (1 << HWTSTAMP_FILTER_PTP_V2_L2_EVENT) | | |
| (1 << HWTSTAMP_FILTER_PTP_V2_L4_EVENT); | |
| return 0; | |
| } | |
| #endif | |
| static const struct ethtool_ops bfin_mac_ethtool_ops = { | |
| .get_link = ethtool_op_get_link, | |
| .get_drvinfo = bfin_mac_ethtool_getdrvinfo, | |
| .get_wol = bfin_mac_ethtool_getwol, | |
| .set_wol = bfin_mac_ethtool_setwol, | |
| #ifdef CONFIG_BFIN_MAC_USE_HWSTAMP | |
| .get_ts_info = bfin_mac_ethtool_get_ts_info, | |
| #endif | |
| .get_link_ksettings = phy_ethtool_get_link_ksettings, | |
| .set_link_ksettings = phy_ethtool_set_link_ksettings, | |
| }; | |
| /**************************************************************************/ | |
| static void setup_system_regs(struct net_device *dev) | |
| { | |
| struct bfin_mac_local *lp = netdev_priv(dev); | |
| int i; | |
| unsigned short sysctl; | |
| /* | |
| * Odd word alignment for Receive Frame DMA word | |
| * Configure checksum support and rcve frame word alignment | |
| */ | |
| sysctl = bfin_read_EMAC_SYSCTL(); | |
| /* | |
| * check if interrupt is requested for any PHY, | |
| * enable PHY interrupt only if needed | |
| */ | |
| for (i = 0; i < PHY_MAX_ADDR; ++i) | |
| if (lp->mii_bus->irq[i] != PHY_POLL) | |
| break; | |
| if (i < PHY_MAX_ADDR) | |
| sysctl |= PHYIE; | |
| sysctl |= RXDWA; | |
| #if defined(BFIN_MAC_CSUM_OFFLOAD) | |
| sysctl |= RXCKS; | |
| #else | |
| sysctl &= ~RXCKS; | |
| #endif | |
| bfin_write_EMAC_SYSCTL(sysctl); | |
| bfin_write_EMAC_MMC_CTL(RSTC | CROLL); | |
| /* Set vlan regs to let 1522 bytes long packets pass through */ | |
| bfin_write_EMAC_VLAN1(lp->vlan1_mask); | |
| bfin_write_EMAC_VLAN2(lp->vlan2_mask); | |
| /* Initialize the TX DMA channel registers */ | |
| bfin_write_DMA2_X_COUNT(0); | |
| bfin_write_DMA2_X_MODIFY(4); | |
| bfin_write_DMA2_Y_COUNT(0); | |
| bfin_write_DMA2_Y_MODIFY(0); | |
| /* Initialize the RX DMA channel registers */ | |
| bfin_write_DMA1_X_COUNT(0); | |
| bfin_write_DMA1_X_MODIFY(4); | |
| bfin_write_DMA1_Y_COUNT(0); | |
| bfin_write_DMA1_Y_MODIFY(0); | |
| } | |
| static void setup_mac_addr(u8 *mac_addr) | |
| { | |
| u32 addr_low = le32_to_cpu(*(__le32 *) & mac_addr[0]); | |
| u16 addr_hi = le16_to_cpu(*(__le16 *) & mac_addr[4]); | |
| /* this depends on a little-endian machine */ | |
| bfin_write_EMAC_ADDRLO(addr_low); | |
| bfin_write_EMAC_ADDRHI(addr_hi); | |
| } | |
| static int bfin_mac_set_mac_address(struct net_device *dev, void *p) | |
| { | |
| struct sockaddr *addr = p; | |
| if (netif_running(dev)) | |
| return -EBUSY; | |
| memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); | |
| setup_mac_addr(dev->dev_addr); | |
| return 0; | |
| } | |
| #ifdef CONFIG_BFIN_MAC_USE_HWSTAMP | |
| #define bfin_mac_hwtstamp_is_none(cfg) ((cfg) == HWTSTAMP_FILTER_NONE) | |
| static u32 bfin_select_phc_clock(u32 input_clk, unsigned int *shift_result) | |
| { | |
| u32 ipn = 1000000000UL / input_clk; | |
| u32 ppn = 1; | |
| unsigned int shift = 0; | |
| while (ppn <= ipn) { | |
| ppn <<= 1; | |
| shift++; | |
| } | |
| *shift_result = shift; | |
| return 1000000000UL / ppn; | |
| } | |
| static int bfin_mac_hwtstamp_set(struct net_device *netdev, | |
| struct ifreq *ifr) | |
| { | |
| struct hwtstamp_config config; | |
| struct bfin_mac_local *lp = netdev_priv(netdev); | |
| u16 ptpctl; | |
| u32 ptpfv1, ptpfv2, ptpfv3, ptpfoff; | |
| if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) | |
| return -EFAULT; | |
| pr_debug("%s config flag:0x%x, tx_type:0x%x, rx_filter:0x%x\n", | |
| __func__, config.flags, config.tx_type, config.rx_filter); | |
| /* reserved for future extensions */ | |
| if (config.flags) | |
| return -EINVAL; | |
| if ((config.tx_type != HWTSTAMP_TX_OFF) && | |
| (config.tx_type != HWTSTAMP_TX_ON)) | |
| return -ERANGE; | |
| ptpctl = bfin_read_EMAC_PTP_CTL(); | |
| switch (config.rx_filter) { | |
| case HWTSTAMP_FILTER_NONE: | |
| /* | |
| * Dont allow any timestamping | |
| */ | |
| ptpfv3 = 0xFFFFFFFF; | |
| bfin_write_EMAC_PTP_FV3(ptpfv3); | |
| break; | |
| case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: | |
| case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: | |
| case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: | |
| /* | |
| * Clear the five comparison mask bits (bits[12:8]) in EMAC_PTP_CTL) | |
| * to enable all the field matches. | |
| */ | |
| ptpctl &= ~0x1F00; | |
| bfin_write_EMAC_PTP_CTL(ptpctl); | |
| /* | |
| * Keep the default values of the EMAC_PTP_FOFF register. | |
| */ | |
| ptpfoff = 0x4A24170C; | |
| bfin_write_EMAC_PTP_FOFF(ptpfoff); | |
| /* | |
| * Keep the default values of the EMAC_PTP_FV1 and EMAC_PTP_FV2 | |
| * registers. | |
| */ | |
| ptpfv1 = 0x11040800; | |
| bfin_write_EMAC_PTP_FV1(ptpfv1); | |
| ptpfv2 = 0x0140013F; | |
| bfin_write_EMAC_PTP_FV2(ptpfv2); | |
| /* | |
| * The default value (0xFFFC) allows the timestamping of both | |
| * received Sync messages and Delay_Req messages. | |
| */ | |
| ptpfv3 = 0xFFFFFFFC; | |
| bfin_write_EMAC_PTP_FV3(ptpfv3); | |
| config.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT; | |
| break; | |
| case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: | |
| case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: | |
| case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: | |
| /* Clear all five comparison mask bits (bits[12:8]) in the | |
| * EMAC_PTP_CTL register to enable all the field matches. | |
| */ | |
| ptpctl &= ~0x1F00; | |
| bfin_write_EMAC_PTP_CTL(ptpctl); | |
| /* | |
| * Keep the default values of the EMAC_PTP_FOFF register, except set | |
| * the PTPCOF field to 0x2A. | |
| */ | |
| ptpfoff = 0x2A24170C; | |
| bfin_write_EMAC_PTP_FOFF(ptpfoff); | |
| /* | |
| * Keep the default values of the EMAC_PTP_FV1 and EMAC_PTP_FV2 | |
| * registers. | |
| */ | |
| ptpfv1 = 0x11040800; | |
| bfin_write_EMAC_PTP_FV1(ptpfv1); | |
| ptpfv2 = 0x0140013F; | |
| bfin_write_EMAC_PTP_FV2(ptpfv2); | |
| /* | |
| * To allow the timestamping of Pdelay_Req and Pdelay_Resp, set | |
| * the value to 0xFFF0. | |
| */ | |
| ptpfv3 = 0xFFFFFFF0; | |
| bfin_write_EMAC_PTP_FV3(ptpfv3); | |
| config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_EVENT; | |
| break; | |
| case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: | |
| case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: | |
| case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: | |
| /* | |
| * Clear bits 8 and 12 of the EMAC_PTP_CTL register to enable only the | |
| * EFTM and PTPCM field comparison. | |
| */ | |
| ptpctl &= ~0x1100; | |
| bfin_write_EMAC_PTP_CTL(ptpctl); | |
| /* | |
| * Keep the default values of all the fields of the EMAC_PTP_FOFF | |
| * register, except set the PTPCOF field to 0x0E. | |
| */ | |
| ptpfoff = 0x0E24170C; | |
| bfin_write_EMAC_PTP_FOFF(ptpfoff); | |
| /* | |
| * Program bits [15:0] of the EMAC_PTP_FV1 register to 0x88F7, which | |
| * corresponds to PTP messages on the MAC layer. | |
| */ | |
| ptpfv1 = 0x110488F7; | |
| bfin_write_EMAC_PTP_FV1(ptpfv1); | |
| ptpfv2 = 0x0140013F; | |
| bfin_write_EMAC_PTP_FV2(ptpfv2); | |
| /* | |
| * To allow the timestamping of Pdelay_Req and Pdelay_Resp | |
| * messages, set the value to 0xFFF0. | |
| */ | |
| ptpfv3 = 0xFFFFFFF0; | |
| bfin_write_EMAC_PTP_FV3(ptpfv3); | |
| config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT; | |
| break; | |
| default: | |
| return -ERANGE; | |
| } | |
| if (config.tx_type == HWTSTAMP_TX_OFF && | |
| bfin_mac_hwtstamp_is_none(config.rx_filter)) { | |
| ptpctl &= ~PTP_EN; | |
| bfin_write_EMAC_PTP_CTL(ptpctl); | |
| SSYNC(); | |
| } else { | |
| ptpctl |= PTP_EN; | |
| bfin_write_EMAC_PTP_CTL(ptpctl); | |
| /* | |
| * clear any existing timestamp | |
| */ | |
| bfin_read_EMAC_PTP_RXSNAPLO(); | |
| bfin_read_EMAC_PTP_RXSNAPHI(); | |
| bfin_read_EMAC_PTP_TXSNAPLO(); | |
| bfin_read_EMAC_PTP_TXSNAPHI(); | |
| SSYNC(); | |
| } | |
| lp->stamp_cfg = config; | |
| return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ? | |
| -EFAULT : 0; | |
| } | |
| static int bfin_mac_hwtstamp_get(struct net_device *netdev, | |
| struct ifreq *ifr) | |
| { | |
| struct bfin_mac_local *lp = netdev_priv(netdev); | |
| return copy_to_user(ifr->ifr_data, &lp->stamp_cfg, | |
| sizeof(lp->stamp_cfg)) ? | |
| -EFAULT : 0; | |
| } | |
| static void bfin_tx_hwtstamp(struct net_device *netdev, struct sk_buff *skb) | |
| { | |
| struct bfin_mac_local *lp = netdev_priv(netdev); | |
| if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) { | |
| int timeout_cnt = MAX_TIMEOUT_CNT; | |
| /* When doing time stamping, keep the connection to the socket | |
| * a while longer | |
| */ | |
| skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; | |
| /* | |
| * The timestamping is done at the EMAC module's MII/RMII interface | |
| * when the module sees the Start of Frame of an event message packet. This | |
| * interface is the closest possible place to the physical Ethernet transmission | |
| * medium, providing the best timing accuracy. | |
| */ | |
| while ((!(bfin_read_EMAC_PTP_ISTAT() & TXTL)) && (--timeout_cnt)) | |
| udelay(1); | |
| if (timeout_cnt == 0) | |
| netdev_err(netdev, "timestamp the TX packet failed\n"); | |
| else { | |
| struct skb_shared_hwtstamps shhwtstamps; | |
| u64 ns; | |
| u64 regval; | |
| regval = bfin_read_EMAC_PTP_TXSNAPLO(); | |
| regval |= (u64)bfin_read_EMAC_PTP_TXSNAPHI() << 32; | |
| memset(&shhwtstamps, 0, sizeof(shhwtstamps)); | |
| ns = regval << lp->shift; | |
| shhwtstamps.hwtstamp = ns_to_ktime(ns); | |
| skb_tstamp_tx(skb, &shhwtstamps); | |
| } | |
| } | |
| } | |
| static void bfin_rx_hwtstamp(struct net_device *netdev, struct sk_buff *skb) | |
| { | |
| struct bfin_mac_local *lp = netdev_priv(netdev); | |
| u32 valid; | |
| u64 regval, ns; | |
| struct skb_shared_hwtstamps *shhwtstamps; | |
| if (bfin_mac_hwtstamp_is_none(lp->stamp_cfg.rx_filter)) | |
| return; | |
| valid = bfin_read_EMAC_PTP_ISTAT() & RXEL; | |
| if (!valid) | |
| return; | |
| shhwtstamps = skb_hwtstamps(skb); | |
| regval = bfin_read_EMAC_PTP_RXSNAPLO(); | |
| regval |= (u64)bfin_read_EMAC_PTP_RXSNAPHI() << 32; | |
| ns = regval << lp->shift; | |
| memset(shhwtstamps, 0, sizeof(*shhwtstamps)); | |
| shhwtstamps->hwtstamp = ns_to_ktime(ns); | |
| } | |
| static void bfin_mac_hwtstamp_init(struct net_device *netdev) | |
| { | |
| struct bfin_mac_local *lp = netdev_priv(netdev); | |
| u64 addend, ppb; | |
| u32 input_clk, phc_clk; | |
| /* Initialize hardware timer */ | |
| input_clk = get_sclk(); | |
| phc_clk = bfin_select_phc_clock(input_clk, &lp->shift); | |
| addend = phc_clk * (1ULL << 32); | |
| do_div(addend, input_clk); | |
| bfin_write_EMAC_PTP_ADDEND((u32)addend); | |
| lp->addend = addend; | |
| ppb = 1000000000ULL * input_clk; | |
| do_div(ppb, phc_clk); | |
| lp->max_ppb = ppb - 1000000000ULL - 1ULL; | |
| /* Initialize hwstamp config */ | |
| lp->stamp_cfg.rx_filter = HWTSTAMP_FILTER_NONE; | |
| lp->stamp_cfg.tx_type = HWTSTAMP_TX_OFF; | |
| } | |
| static u64 bfin_ptp_time_read(struct bfin_mac_local *lp) | |
| { | |
| u64 ns; | |
| u32 lo, hi; | |
| lo = bfin_read_EMAC_PTP_TIMELO(); | |
| hi = bfin_read_EMAC_PTP_TIMEHI(); | |
| ns = ((u64) hi) << 32; | |
| ns |= lo; | |
| ns <<= lp->shift; | |
| return ns; | |
| } | |
| static void bfin_ptp_time_write(struct bfin_mac_local *lp, u64 ns) | |
| { | |
| u32 hi, lo; | |
| ns >>= lp->shift; | |
| hi = ns >> 32; | |
| lo = ns & 0xffffffff; | |
| bfin_write_EMAC_PTP_TIMELO(lo); | |
| bfin_write_EMAC_PTP_TIMEHI(hi); | |
| } | |
| /* PTP Hardware Clock operations */ | |
| static int bfin_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb) | |
| { | |
| u64 adj; | |
| u32 diff, addend; | |
| int neg_adj = 0; | |
| struct bfin_mac_local *lp = | |
| container_of(ptp, struct bfin_mac_local, caps); | |
| if (ppb < 0) { | |
| neg_adj = 1; | |
| ppb = -ppb; | |
| } | |
| addend = lp->addend; | |
| adj = addend; | |
| adj *= ppb; | |
| diff = div_u64(adj, 1000000000ULL); | |
| addend = neg_adj ? addend - diff : addend + diff; | |
| bfin_write_EMAC_PTP_ADDEND(addend); | |
| return 0; | |
| } | |
| static int bfin_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta) | |
| { | |
| s64 now; | |
| unsigned long flags; | |
| struct bfin_mac_local *lp = | |
| container_of(ptp, struct bfin_mac_local, caps); | |
| spin_lock_irqsave(&lp->phc_lock, flags); | |
| now = bfin_ptp_time_read(lp); | |
| now += delta; | |
| bfin_ptp_time_write(lp, now); | |
| spin_unlock_irqrestore(&lp->phc_lock, flags); | |
| return 0; | |
| } | |
| static int bfin_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts) | |
| { | |
| u64 ns; | |
| unsigned long flags; | |
| struct bfin_mac_local *lp = | |
| container_of(ptp, struct bfin_mac_local, caps); | |
| spin_lock_irqsave(&lp->phc_lock, flags); | |
| ns = bfin_ptp_time_read(lp); | |
| spin_unlock_irqrestore(&lp->phc_lock, flags); | |
| *ts = ns_to_timespec64(ns); | |
| return 0; | |
| } | |
| static int bfin_ptp_settime(struct ptp_clock_info *ptp, | |
| const struct timespec64 *ts) | |
| { | |
| u64 ns; | |
| unsigned long flags; | |
| struct bfin_mac_local *lp = | |
| container_of(ptp, struct bfin_mac_local, caps); | |
| ns = timespec64_to_ns(ts); | |
| spin_lock_irqsave(&lp->phc_lock, flags); | |
| bfin_ptp_time_write(lp, ns); | |
| spin_unlock_irqrestore(&lp->phc_lock, flags); | |
| return 0; | |
| } | |
| static int bfin_ptp_enable(struct ptp_clock_info *ptp, | |
| struct ptp_clock_request *rq, int on) | |
| { | |
| return -EOPNOTSUPP; | |
| } | |
| static struct ptp_clock_info bfin_ptp_caps = { | |
| .owner = THIS_MODULE, | |
| .name = "BF518 clock", | |
| .max_adj = 0, | |
| .n_alarm = 0, | |
| .n_ext_ts = 0, | |
| .n_per_out = 0, | |
| .n_pins = 0, | |
| .pps = 0, | |
| .adjfreq = bfin_ptp_adjfreq, | |
| .adjtime = bfin_ptp_adjtime, | |
| .gettime64 = bfin_ptp_gettime, | |
| .settime64 = bfin_ptp_settime, | |
| .enable = bfin_ptp_enable, | |
| }; | |
| static int bfin_phc_init(struct net_device *netdev, struct device *dev) | |
| { | |
| struct bfin_mac_local *lp = netdev_priv(netdev); | |
| lp->caps = bfin_ptp_caps; | |
| lp->caps.max_adj = lp->max_ppb; | |
| lp->clock = ptp_clock_register(&lp->caps, dev); | |
| if (IS_ERR(lp->clock)) | |
| return PTR_ERR(lp->clock); | |
| lp->phc_index = ptp_clock_index(lp->clock); | |
| spin_lock_init(&lp->phc_lock); | |
| return 0; | |
| } | |
| static void bfin_phc_release(struct bfin_mac_local *lp) | |
| { | |
| ptp_clock_unregister(lp->clock); | |
| } | |
| #else | |
| # define bfin_mac_hwtstamp_is_none(cfg) 0 | |
| # define bfin_mac_hwtstamp_init(dev) | |
| # define bfin_mac_hwtstamp_set(dev, ifr) (-EOPNOTSUPP) | |
| # define bfin_mac_hwtstamp_get(dev, ifr) (-EOPNOTSUPP) | |
| # define bfin_rx_hwtstamp(dev, skb) | |
| # define bfin_tx_hwtstamp(dev, skb) | |
| # define bfin_phc_init(netdev, dev) 0 | |
| # define bfin_phc_release(lp) | |
| #endif | |
| static inline void _tx_reclaim_skb(void) | |
| { | |
| do { | |
| tx_list_head->desc_a.config &= ~DMAEN; | |
| tx_list_head->status.status_word = 0; | |
| if (tx_list_head->skb) { | |
| dev_consume_skb_any(tx_list_head->skb); | |
| tx_list_head->skb = NULL; | |
| } | |
| tx_list_head = tx_list_head->next; | |
| } while (tx_list_head->status.status_word != 0); | |
| } | |
| static void tx_reclaim_skb(struct bfin_mac_local *lp) | |
| { | |
| int timeout_cnt = MAX_TIMEOUT_CNT; | |
| if (tx_list_head->status.status_word != 0) | |
| _tx_reclaim_skb(); | |
| if (current_tx_ptr->next == tx_list_head) { | |
| while (tx_list_head->status.status_word == 0) { | |
| /* slow down polling to avoid too many queue stop. */ | |
| udelay(10); | |
| /* reclaim skb if DMA is not running. */ | |
| if (!(bfin_read_DMA2_IRQ_STATUS() & DMA_RUN)) | |
| break; | |
| if (timeout_cnt-- < 0) | |
| break; | |
| } | |
| if (timeout_cnt >= 0) | |
| _tx_reclaim_skb(); | |
| else | |
| netif_stop_queue(lp->ndev); | |
| } | |
| if (current_tx_ptr->next != tx_list_head && | |
| netif_queue_stopped(lp->ndev)) | |
| netif_wake_queue(lp->ndev); | |
| if (tx_list_head != current_tx_ptr) { | |
| /* shorten the timer interval if tx queue is stopped */ | |
| if (netif_queue_stopped(lp->ndev)) | |
| lp->tx_reclaim_timer.expires = | |
| jiffies + (TX_RECLAIM_JIFFIES >> 4); | |
| else | |
| lp->tx_reclaim_timer.expires = | |
| jiffies + TX_RECLAIM_JIFFIES; | |
| mod_timer(&lp->tx_reclaim_timer, | |
| lp->tx_reclaim_timer.expires); | |
| } | |
| return; | |
| } | |
| static void tx_reclaim_skb_timeout(unsigned long lp) | |
| { | |
| tx_reclaim_skb((struct bfin_mac_local *)lp); | |
| } | |
| static int bfin_mac_hard_start_xmit(struct sk_buff *skb, | |
| struct net_device *dev) | |
| { | |
| struct bfin_mac_local *lp = netdev_priv(dev); | |
| u16 *data; | |
| u32 data_align = (unsigned long)(skb->data) & 0x3; | |
| current_tx_ptr->skb = skb; | |
| if (data_align == 0x2) { | |
| /* move skb->data to current_tx_ptr payload */ | |
| data = (u16 *)(skb->data) - 1; | |
| *data = (u16)(skb->len); | |
| /* | |
| * When transmitting an Ethernet packet, the PTP_TSYNC module requires | |
| * a DMA_Length_Word field associated with the packet. The lower 12 bits | |
| * of this field are the length of the packet payload in bytes and the higher | |
| * 4 bits are the timestamping enable field. | |
| */ | |
| if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) | |
| *data |= 0x1000; | |
| current_tx_ptr->desc_a.start_addr = (u32)data; | |
| /* this is important! */ | |
| blackfin_dcache_flush_range((u32)data, | |
| (u32)((u8 *)data + skb->len + 4)); | |
| } else { | |
| *((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len); | |
| /* enable timestamping for the sent packet */ | |
| if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) | |
| *((u16 *)(current_tx_ptr->packet)) |= 0x1000; | |
| memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data, | |
| skb->len); | |
| current_tx_ptr->desc_a.start_addr = | |
| (u32)current_tx_ptr->packet; | |
| blackfin_dcache_flush_range( | |
| (u32)current_tx_ptr->packet, | |
| (u32)(current_tx_ptr->packet + skb->len + 2)); | |
| } | |
| /* make sure the internal data buffers in the core are drained | |
| * so that the DMA descriptors are completely written when the | |
| * DMA engine goes to fetch them below | |
| */ | |
| SSYNC(); | |
| /* always clear status buffer before start tx dma */ | |
| current_tx_ptr->status.status_word = 0; | |
| /* enable this packet's dma */ | |
| current_tx_ptr->desc_a.config |= DMAEN; | |
| /* tx dma is running, just return */ | |
| if (bfin_read_DMA2_IRQ_STATUS() & DMA_RUN) | |
| goto out; | |
| /* tx dma is not running */ | |
| bfin_write_DMA2_NEXT_DESC_PTR(&(current_tx_ptr->desc_a)); | |
| /* dma enabled, read from memory, size is 6 */ | |
| bfin_write_DMA2_CONFIG(current_tx_ptr->desc_a.config); | |
| /* Turn on the EMAC tx */ | |
| bfin_write_EMAC_OPMODE(bfin_read_EMAC_OPMODE() | TE); | |
| out: | |
| bfin_tx_hwtstamp(dev, skb); | |
| current_tx_ptr = current_tx_ptr->next; | |
| dev->stats.tx_packets++; | |
| dev->stats.tx_bytes += (skb->len); | |
| tx_reclaim_skb(lp); | |
| return NETDEV_TX_OK; | |
| } | |
| #define IP_HEADER_OFF 0 | |
| #define RX_ERROR_MASK (RX_LONG | RX_ALIGN | RX_CRC | RX_LEN | \ | |
| RX_FRAG | RX_ADDR | RX_DMAO | RX_PHY | RX_LATE | RX_RANGE) | |
| static void bfin_mac_rx(struct bfin_mac_local *lp) | |
| { | |
| struct net_device *dev = lp->ndev; | |
| struct sk_buff *skb, *new_skb; | |
| unsigned short len; | |
| #if defined(BFIN_MAC_CSUM_OFFLOAD) | |
| unsigned int i; | |
| unsigned char fcs[ETH_FCS_LEN + 1]; | |
| #endif | |
| /* check if frame status word reports an error condition | |
| * we which case we simply drop the packet | |
| */ | |
| if (current_rx_ptr->status.status_word & RX_ERROR_MASK) { | |
| netdev_notice(dev, "rx: receive error - packet dropped\n"); | |
| dev->stats.rx_dropped++; | |
| goto out; | |
| } | |
| /* allocate a new skb for next time receive */ | |
| skb = current_rx_ptr->skb; | |
| new_skb = netdev_alloc_skb(dev, PKT_BUF_SZ + NET_IP_ALIGN); | |
| if (!new_skb) { | |
| dev->stats.rx_dropped++; | |
| goto out; | |
| } | |
| /* reserve 2 bytes for RXDWA padding */ | |
| skb_reserve(new_skb, NET_IP_ALIGN); | |
| /* Invalidate the data cache of skb->data range when it is write back | |
| * cache. It will prevent overwritting the new data from DMA | |
| */ | |
| blackfin_dcache_invalidate_range((unsigned long)new_skb->head, | |
| (unsigned long)new_skb->end); | |
| current_rx_ptr->skb = new_skb; | |
| current_rx_ptr->desc_a.start_addr = (unsigned long)new_skb->data - 2; | |
| len = (unsigned short)(current_rx_ptr->status.status_word & RX_FRLEN); | |
| /* Deduce Ethernet FCS length from Ethernet payload length */ | |
| len -= ETH_FCS_LEN; | |
| skb_put(skb, len); | |
| skb->protocol = eth_type_trans(skb, dev); | |
| bfin_rx_hwtstamp(dev, skb); | |
| #if defined(BFIN_MAC_CSUM_OFFLOAD) | |
| /* Checksum offloading only works for IPv4 packets with the standard IP header | |
| * length of 20 bytes, because the blackfin MAC checksum calculation is | |
| * based on that assumption. We must NOT use the calculated checksum if our | |
| * IP version or header break that assumption. | |
| */ | |
| if (skb->data[IP_HEADER_OFF] == 0x45) { | |
| skb->csum = current_rx_ptr->status.ip_payload_csum; | |
| /* | |
| * Deduce Ethernet FCS from hardware generated IP payload checksum. | |
| * IP checksum is based on 16-bit one's complement algorithm. | |
| * To deduce a value from checksum is equal to add its inversion. | |
| * If the IP payload len is odd, the inversed FCS should also | |
| * begin from odd address and leave first byte zero. | |
| */ | |
| if (skb->len % 2) { | |
| fcs[0] = 0; | |
| for (i = 0; i < ETH_FCS_LEN; i++) | |
| fcs[i + 1] = ~skb->data[skb->len + i]; | |
| skb->csum = csum_partial(fcs, ETH_FCS_LEN + 1, skb->csum); | |
| } else { | |
| for (i = 0; i < ETH_FCS_LEN; i++) | |
| fcs[i] = ~skb->data[skb->len + i]; | |
| skb->csum = csum_partial(fcs, ETH_FCS_LEN, skb->csum); | |
| } | |
| skb->ip_summed = CHECKSUM_COMPLETE; | |
| } | |
| #endif | |
| napi_gro_receive(&lp->napi, skb); | |
| dev->stats.rx_packets++; | |
| dev->stats.rx_bytes += len; | |
| out: | |
| current_rx_ptr->status.status_word = 0x00000000; | |
| current_rx_ptr = current_rx_ptr->next; | |
| } | |
| static int bfin_mac_poll(struct napi_struct *napi, int budget) | |
| { | |
| int i = 0; | |
| struct bfin_mac_local *lp = container_of(napi, | |
| struct bfin_mac_local, | |
| napi); | |
| while (current_rx_ptr->status.status_word != 0 && i < budget) { | |
| bfin_mac_rx(lp); | |
| i++; | |
| } | |
| if (i < budget) { | |
| napi_complete(napi); | |
| if (test_and_clear_bit(BFIN_MAC_RX_IRQ_DISABLED, &lp->flags)) | |
| enable_irq(IRQ_MAC_RX); | |
| } | |
| return i; | |
| } | |
| /* interrupt routine to handle rx and error signal */ | |
| static irqreturn_t bfin_mac_interrupt(int irq, void *dev_id) | |
| { | |
| struct bfin_mac_local *lp = netdev_priv(dev_id); | |
| u32 status; | |
| status = bfin_read_DMA1_IRQ_STATUS(); | |
| bfin_write_DMA1_IRQ_STATUS(status | DMA_DONE | DMA_ERR); | |
| if (status & DMA_DONE) { | |
| disable_irq_nosync(IRQ_MAC_RX); | |
| set_bit(BFIN_MAC_RX_IRQ_DISABLED, &lp->flags); | |
| napi_schedule(&lp->napi); | |
| } | |
| return IRQ_HANDLED; | |
| } | |
| #ifdef CONFIG_NET_POLL_CONTROLLER | |
| static void bfin_mac_poll_controller(struct net_device *dev) | |
| { | |
| struct bfin_mac_local *lp = netdev_priv(dev); | |
| bfin_mac_interrupt(IRQ_MAC_RX, dev); | |
| tx_reclaim_skb(lp); | |
| } | |
| #endif /* CONFIG_NET_POLL_CONTROLLER */ | |
| static void bfin_mac_disable(void) | |
| { | |
| unsigned int opmode; | |
| opmode = bfin_read_EMAC_OPMODE(); | |
| opmode &= (~RE); | |
| opmode &= (~TE); | |
| /* Turn off the EMAC */ | |
| bfin_write_EMAC_OPMODE(opmode); | |
| } | |
| /* | |
| * Enable Interrupts, Receive, and Transmit | |
| */ | |
| static int bfin_mac_enable(struct phy_device *phydev) | |
| { | |
| int ret; | |
| u32 opmode; | |
| pr_debug("%s\n", __func__); | |
| /* Set RX DMA */ | |
| bfin_write_DMA1_NEXT_DESC_PTR(&(rx_list_head->desc_a)); | |
| bfin_write_DMA1_CONFIG(rx_list_head->desc_a.config); | |
| /* Wait MII done */ | |
| ret = bfin_mdio_poll(); | |
| if (ret) | |
| return ret; | |
| /* We enable only RX here */ | |
| /* ASTP : Enable Automatic Pad Stripping | |
| PR : Promiscuous Mode for test | |
| PSF : Receive frames with total length less than 64 bytes. | |
| FDMODE : Full Duplex Mode | |
| LB : Internal Loopback for test | |
| RE : Receiver Enable */ | |
| opmode = bfin_read_EMAC_OPMODE(); | |
| if (opmode & FDMODE) | |
| opmode |= PSF; | |
| else | |
| opmode |= DRO | DC | PSF; | |
| opmode |= RE; | |
| if (phydev->interface == PHY_INTERFACE_MODE_RMII) { | |
| opmode |= RMII; /* For Now only 100MBit are supported */ | |
| #if defined(CONFIG_BF537) || defined(CONFIG_BF536) | |
| if (__SILICON_REVISION__ < 3) { | |
| /* | |
| * This isn't publicly documented (fun times!), but in | |
| * silicon <=0.2, the RX and TX pins are clocked together. | |
| * So in order to recv, we must enable the transmit side | |
| * as well. This will cause a spurious TX interrupt too, | |
| * but we can easily consume that. | |
| */ | |
| opmode |= TE; | |
| } | |
| #endif | |
| } | |
| /* Turn on the EMAC rx */ | |
| bfin_write_EMAC_OPMODE(opmode); | |
| return 0; | |
| } | |
| /* Our watchdog timed out. Called by the networking layer */ | |
| static void bfin_mac_timeout(struct net_device *dev) | |
| { | |
| struct bfin_mac_local *lp = netdev_priv(dev); | |
| pr_debug("%s: %s\n", dev->name, __func__); | |
| bfin_mac_disable(); | |
| del_timer(&lp->tx_reclaim_timer); | |
| /* reset tx queue and free skb */ | |
| while (tx_list_head != current_tx_ptr) { | |
| tx_list_head->desc_a.config &= ~DMAEN; | |
| tx_list_head->status.status_word = 0; | |
| if (tx_list_head->skb) { | |
| dev_kfree_skb(tx_list_head->skb); | |
| tx_list_head->skb = NULL; | |
| } | |
| tx_list_head = tx_list_head->next; | |
| } | |
| if (netif_queue_stopped(dev)) | |
| netif_wake_queue(dev); | |
| bfin_mac_enable(dev->phydev); | |
| /* We can accept TX packets again */ | |
| netif_trans_update(dev); /* prevent tx timeout */ | |
| } | |
| static void bfin_mac_multicast_hash(struct net_device *dev) | |
| { | |
| u32 emac_hashhi, emac_hashlo; | |
| struct netdev_hw_addr *ha; | |
| u32 crc; | |
| emac_hashhi = emac_hashlo = 0; | |
| netdev_for_each_mc_addr(ha, dev) { | |
| crc = ether_crc(ETH_ALEN, ha->addr); | |
| crc >>= 26; | |
| if (crc & 0x20) | |
| emac_hashhi |= 1 << (crc & 0x1f); | |
| else | |
| emac_hashlo |= 1 << (crc & 0x1f); | |
| } | |
| bfin_write_EMAC_HASHHI(emac_hashhi); | |
| bfin_write_EMAC_HASHLO(emac_hashlo); | |
| } | |
| /* | |
| * This routine will, depending on the values passed to it, | |
| * either make it accept multicast packets, go into | |
| * promiscuous mode (for TCPDUMP and cousins) or accept | |
| * a select set of multicast packets | |
| */ | |
| static void bfin_mac_set_multicast_list(struct net_device *dev) | |
| { | |
| u32 sysctl; | |
| if (dev->flags & IFF_PROMISC) { | |
| netdev_info(dev, "set promisc mode\n"); | |
| sysctl = bfin_read_EMAC_OPMODE(); | |
| sysctl |= PR; | |
| bfin_write_EMAC_OPMODE(sysctl); | |
| } else if (dev->flags & IFF_ALLMULTI) { | |
| /* accept all multicast */ | |
| sysctl = bfin_read_EMAC_OPMODE(); | |
| sysctl |= PAM; | |
| bfin_write_EMAC_OPMODE(sysctl); | |
| } else if (!netdev_mc_empty(dev)) { | |
| /* set up multicast hash table */ | |
| sysctl = bfin_read_EMAC_OPMODE(); | |
| sysctl |= HM; | |
| bfin_write_EMAC_OPMODE(sysctl); | |
| bfin_mac_multicast_hash(dev); | |
| } else { | |
| /* clear promisc or multicast mode */ | |
| sysctl = bfin_read_EMAC_OPMODE(); | |
| sysctl &= ~(RAF | PAM); | |
| bfin_write_EMAC_OPMODE(sysctl); | |
| } | |
| } | |
| static int bfin_mac_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) | |
| { | |
| if (!netif_running(netdev)) | |
| return -EINVAL; | |
| switch (cmd) { | |
| case SIOCSHWTSTAMP: | |
| return bfin_mac_hwtstamp_set(netdev, ifr); | |
| case SIOCGHWTSTAMP: | |
| return bfin_mac_hwtstamp_get(netdev, ifr); | |
| default: | |
| if (netdev->phydev) | |
| return phy_mii_ioctl(netdev->phydev, ifr, cmd); | |
| else | |
| return -EOPNOTSUPP; | |
| } | |
| } | |
| /* | |
| * this puts the device in an inactive state | |
| */ | |
| static void bfin_mac_shutdown(struct net_device *dev) | |
| { | |
| /* Turn off the EMAC */ | |
| bfin_write_EMAC_OPMODE(0x00000000); | |
| /* Turn off the EMAC RX DMA */ | |
| bfin_write_DMA1_CONFIG(0x0000); | |
| bfin_write_DMA2_CONFIG(0x0000); | |
| } | |
| /* | |
| * Open and Initialize the interface | |
| * | |
| * Set up everything, reset the card, etc.. | |
| */ | |
| static int bfin_mac_open(struct net_device *dev) | |
| { | |
| struct bfin_mac_local *lp = netdev_priv(dev); | |
| int ret; | |
| pr_debug("%s: %s\n", dev->name, __func__); | |
| /* | |
| * Check that the address is valid. If its not, refuse | |
| * to bring the device up. The user must specify an | |
| * address using ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx | |
| */ | |
| if (!is_valid_ether_addr(dev->dev_addr)) { | |
| netdev_warn(dev, "no valid ethernet hw addr\n"); | |
| return -EINVAL; | |
| } | |
| /* initial rx and tx list */ | |
| ret = desc_list_init(dev); | |
| if (ret) | |
| return ret; | |
| phy_start(dev->phydev); | |
| setup_system_regs(dev); | |
| setup_mac_addr(dev->dev_addr); | |
| bfin_mac_disable(); | |
| ret = bfin_mac_enable(dev->phydev); | |
| if (ret) | |
| return ret; | |
| pr_debug("hardware init finished\n"); | |
| napi_enable(&lp->napi); | |
| netif_start_queue(dev); | |
| netif_carrier_on(dev); | |
| return 0; | |
| } | |
| /* | |
| * this makes the board clean up everything that it can | |
| * and not talk to the outside world. Caused by | |
| * an 'ifconfig ethX down' | |
| */ | |
| static int bfin_mac_close(struct net_device *dev) | |
| { | |
| struct bfin_mac_local *lp = netdev_priv(dev); | |
| pr_debug("%s: %s\n", dev->name, __func__); | |
| netif_stop_queue(dev); | |
| napi_disable(&lp->napi); | |
| netif_carrier_off(dev); | |
| phy_stop(dev->phydev); | |
| phy_write(dev->phydev, MII_BMCR, BMCR_PDOWN); | |
| /* clear everything */ | |
| bfin_mac_shutdown(dev); | |
| /* free the rx/tx buffers */ | |
| desc_list_free(); | |
| return 0; | |
| } | |
| static const struct net_device_ops bfin_mac_netdev_ops = { | |
| .ndo_open = bfin_mac_open, | |
| .ndo_stop = bfin_mac_close, | |
| .ndo_start_xmit = bfin_mac_hard_start_xmit, | |
| .ndo_set_mac_address = bfin_mac_set_mac_address, | |
| .ndo_tx_timeout = bfin_mac_timeout, | |
| .ndo_set_rx_mode = bfin_mac_set_multicast_list, | |
| .ndo_do_ioctl = bfin_mac_ioctl, | |
| .ndo_validate_addr = eth_validate_addr, | |
| .ndo_change_mtu = eth_change_mtu, | |
| #ifdef CONFIG_NET_POLL_CONTROLLER | |
| .ndo_poll_controller = bfin_mac_poll_controller, | |
| #endif | |
| }; | |
| static int bfin_mac_probe(struct platform_device *pdev) | |
| { | |
| struct net_device *ndev; | |
| struct bfin_mac_local *lp; | |
| struct platform_device *pd; | |
| struct bfin_mii_bus_platform_data *mii_bus_data; | |
| int rc; | |
| ndev = alloc_etherdev(sizeof(struct bfin_mac_local)); | |
| if (!ndev) | |
| return -ENOMEM; | |
| SET_NETDEV_DEV(ndev, &pdev->dev); | |
| platform_set_drvdata(pdev, ndev); | |
| lp = netdev_priv(ndev); | |
| lp->ndev = ndev; | |
| /* Grab the MAC address in the MAC */ | |
| *(__le32 *) (&(ndev->dev_addr[0])) = cpu_to_le32(bfin_read_EMAC_ADDRLO()); | |
| *(__le16 *) (&(ndev->dev_addr[4])) = cpu_to_le16((u16) bfin_read_EMAC_ADDRHI()); | |
| /* probe mac */ | |
| /*todo: how to probe? which is revision_register */ | |
| bfin_write_EMAC_ADDRLO(0x12345678); | |
| if (bfin_read_EMAC_ADDRLO() != 0x12345678) { | |
| dev_err(&pdev->dev, "Cannot detect Blackfin on-chip ethernet MAC controller!\n"); | |
| rc = -ENODEV; | |
| goto out_err_probe_mac; | |
| } | |
| /* | |
| * Is it valid? (Did bootloader initialize it?) | |
| * Grab the MAC from the board somehow | |
| * this is done in the arch/blackfin/mach-bfxxx/boards/eth_mac.c | |
| */ | |
| if (!is_valid_ether_addr(ndev->dev_addr)) { | |
| if (bfin_get_ether_addr(ndev->dev_addr) || | |
| !is_valid_ether_addr(ndev->dev_addr)) { | |
| /* Still not valid, get a random one */ | |
| netdev_warn(ndev, "Setting Ethernet MAC to a random one\n"); | |
| eth_hw_addr_random(ndev); | |
| } | |
| } | |
| setup_mac_addr(ndev->dev_addr); | |
| if (!dev_get_platdata(&pdev->dev)) { | |
| dev_err(&pdev->dev, "Cannot get platform device bfin_mii_bus!\n"); | |
| rc = -ENODEV; | |
| goto out_err_probe_mac; | |
| } | |
| pd = dev_get_platdata(&pdev->dev); | |
| lp->mii_bus = platform_get_drvdata(pd); | |
| if (!lp->mii_bus) { | |
| dev_err(&pdev->dev, "Cannot get mii_bus!\n"); | |
| rc = -ENODEV; | |
| goto out_err_probe_mac; | |
| } | |
| lp->mii_bus->priv = ndev; | |
| mii_bus_data = dev_get_platdata(&pd->dev); | |
| rc = mii_probe(ndev, mii_bus_data->phy_mode); | |
| if (rc) { | |
| dev_err(&pdev->dev, "MII Probe failed!\n"); | |
| goto out_err_mii_probe; | |
| } | |
| lp->vlan1_mask = ETH_P_8021Q | mii_bus_data->vlan1_mask; | |
| lp->vlan2_mask = ETH_P_8021Q | mii_bus_data->vlan2_mask; | |
| ndev->netdev_ops = &bfin_mac_netdev_ops; | |
| ndev->ethtool_ops = &bfin_mac_ethtool_ops; | |
| init_timer(&lp->tx_reclaim_timer); | |
| lp->tx_reclaim_timer.data = (unsigned long)lp; | |
| lp->tx_reclaim_timer.function = tx_reclaim_skb_timeout; | |
| lp->flags = 0; | |
| netif_napi_add(ndev, &lp->napi, bfin_mac_poll, CONFIG_BFIN_RX_DESC_NUM); | |
| spin_lock_init(&lp->lock); | |
| /* now, enable interrupts */ | |
| /* register irq handler */ | |
| rc = request_irq(IRQ_MAC_RX, bfin_mac_interrupt, | |
| 0, "EMAC_RX", ndev); | |
| if (rc) { | |
| dev_err(&pdev->dev, "Cannot request Blackfin MAC RX IRQ!\n"); | |
| rc = -EBUSY; | |
| goto out_err_request_irq; | |
| } | |
| rc = register_netdev(ndev); | |
| if (rc) { | |
| dev_err(&pdev->dev, "Cannot register net device!\n"); | |
| goto out_err_reg_ndev; | |
| } | |
| bfin_mac_hwtstamp_init(ndev); | |
| rc = bfin_phc_init(ndev, &pdev->dev); | |
| if (rc) { | |
| dev_err(&pdev->dev, "Cannot register PHC device!\n"); | |
| goto out_err_phc; | |
| } | |
| /* now, print out the card info, in a short format.. */ | |
| netdev_info(ndev, "%s, Version %s\n", DRV_DESC, DRV_VERSION); | |
| return 0; | |
| out_err_phc: | |
| out_err_reg_ndev: | |
| free_irq(IRQ_MAC_RX, ndev); | |
| out_err_request_irq: | |
| netif_napi_del(&lp->napi); | |
| out_err_mii_probe: | |
| mdiobus_unregister(lp->mii_bus); | |
| mdiobus_free(lp->mii_bus); | |
| out_err_probe_mac: | |
| free_netdev(ndev); | |
| return rc; | |
| } | |
| static int bfin_mac_remove(struct platform_device *pdev) | |
| { | |
| struct net_device *ndev = platform_get_drvdata(pdev); | |
| struct bfin_mac_local *lp = netdev_priv(ndev); | |
| bfin_phc_release(lp); | |
| lp->mii_bus->priv = NULL; | |
| unregister_netdev(ndev); | |
| netif_napi_del(&lp->napi); | |
| free_irq(IRQ_MAC_RX, ndev); | |
| free_netdev(ndev); | |
| return 0; | |
| } | |
| #ifdef CONFIG_PM | |
| static int bfin_mac_suspend(struct platform_device *pdev, pm_message_t mesg) | |
| { | |
| struct net_device *net_dev = platform_get_drvdata(pdev); | |
| struct bfin_mac_local *lp = netdev_priv(net_dev); | |
| if (lp->wol) { | |
| bfin_write_EMAC_OPMODE((bfin_read_EMAC_OPMODE() & ~TE) | RE); | |
| bfin_write_EMAC_WKUP_CTL(MPKE); | |
| enable_irq_wake(IRQ_MAC_WAKEDET); | |
| } else { | |
| if (netif_running(net_dev)) | |
| bfin_mac_close(net_dev); | |
| } | |
| return 0; | |
| } | |
| static int bfin_mac_resume(struct platform_device *pdev) | |
| { | |
| struct net_device *net_dev = platform_get_drvdata(pdev); | |
| struct bfin_mac_local *lp = netdev_priv(net_dev); | |
| if (lp->wol) { | |
| bfin_write_EMAC_OPMODE(bfin_read_EMAC_OPMODE() | TE); | |
| bfin_write_EMAC_WKUP_CTL(0); | |
| disable_irq_wake(IRQ_MAC_WAKEDET); | |
| } else { | |
| if (netif_running(net_dev)) | |
| bfin_mac_open(net_dev); | |
| } | |
| return 0; | |
| } | |
| #else | |
| #define bfin_mac_suspend NULL | |
| #define bfin_mac_resume NULL | |
| #endif /* CONFIG_PM */ | |
| static int bfin_mii_bus_probe(struct platform_device *pdev) | |
| { | |
| struct mii_bus *miibus; | |
| struct bfin_mii_bus_platform_data *mii_bus_pd; | |
| const unsigned short *pin_req; | |
| int rc, i; | |
| mii_bus_pd = dev_get_platdata(&pdev->dev); | |
| if (!mii_bus_pd) { | |
| dev_err(&pdev->dev, "No peripherals in platform data!\n"); | |
| return -EINVAL; | |
| } | |
| /* | |
| * We are setting up a network card, | |
| * so set the GPIO pins to Ethernet mode | |
| */ | |
| pin_req = mii_bus_pd->mac_peripherals; | |
| rc = peripheral_request_list(pin_req, KBUILD_MODNAME); | |
| if (rc) { | |
| dev_err(&pdev->dev, "Requesting peripherals failed!\n"); | |
| return rc; | |
| } | |
| rc = -ENOMEM; | |
| miibus = mdiobus_alloc(); | |
| if (miibus == NULL) | |
| goto out_err_alloc; | |
| miibus->read = bfin_mdiobus_read; | |
| miibus->write = bfin_mdiobus_write; | |
| miibus->parent = &pdev->dev; | |
| miibus->name = "bfin_mii_bus"; | |
| miibus->phy_mask = mii_bus_pd->phy_mask; | |
| snprintf(miibus->id, MII_BUS_ID_SIZE, "%s-%x", | |
| pdev->name, pdev->id); | |
| rc = clamp(mii_bus_pd->phydev_number, 0, PHY_MAX_ADDR); | |
| if (rc != mii_bus_pd->phydev_number) | |
| dev_err(&pdev->dev, "Invalid number (%i) of phydevs\n", | |
| mii_bus_pd->phydev_number); | |
| for (i = 0; i < rc; ++i) { | |
| unsigned short phyaddr = mii_bus_pd->phydev_data[i].addr; | |
| if (phyaddr < PHY_MAX_ADDR) | |
| miibus->irq[phyaddr] = mii_bus_pd->phydev_data[i].irq; | |
| else | |
| dev_err(&pdev->dev, | |
| "Invalid PHY address %i for phydev %i\n", | |
| phyaddr, i); | |
| } | |
| rc = mdiobus_register(miibus); | |
| if (rc) { | |
| dev_err(&pdev->dev, "Cannot register MDIO bus!\n"); | |
| goto out_err_irq_alloc; | |
| } | |
| platform_set_drvdata(pdev, miibus); | |
| return 0; | |
| out_err_irq_alloc: | |
| mdiobus_free(miibus); | |
| out_err_alloc: | |
| peripheral_free_list(pin_req); | |
| return rc; | |
| } | |
| static int bfin_mii_bus_remove(struct platform_device *pdev) | |
| { | |
| struct mii_bus *miibus = platform_get_drvdata(pdev); | |
| struct bfin_mii_bus_platform_data *mii_bus_pd = | |
| dev_get_platdata(&pdev->dev); | |
| mdiobus_unregister(miibus); | |
| mdiobus_free(miibus); | |
| peripheral_free_list(mii_bus_pd->mac_peripherals); | |
| return 0; | |
| } | |
| static struct platform_driver bfin_mii_bus_driver = { | |
| .probe = bfin_mii_bus_probe, | |
| .remove = bfin_mii_bus_remove, | |
| .driver = { | |
| .name = "bfin_mii_bus", | |
| }, | |
| }; | |
| static struct platform_driver bfin_mac_driver = { | |
| .probe = bfin_mac_probe, | |
| .remove = bfin_mac_remove, | |
| .resume = bfin_mac_resume, | |
| .suspend = bfin_mac_suspend, | |
| .driver = { | |
| .name = KBUILD_MODNAME, | |
| }, | |
| }; | |
| static struct platform_driver * const drivers[] = { | |
| &bfin_mii_bus_driver, | |
| &bfin_mac_driver, | |
| }; | |
| static int __init bfin_mac_init(void) | |
| { | |
| return platform_register_drivers(drivers, ARRAY_SIZE(drivers)); | |
| } | |
| module_init(bfin_mac_init); | |
| static void __exit bfin_mac_cleanup(void) | |
| { | |
| platform_unregister_drivers(drivers, ARRAY_SIZE(drivers)); | |
| } | |
| module_exit(bfin_mac_cleanup); | |