drivers/net/ethernet/intel/Kconfig - arm/linux - Git at Google


            
            #

            
            # Intel network device configuration

            
            #


            config NET_VENDOR_INTEL

            
            	bool "Intel devices"

            
            	default y

            
            	---help---

            
            	  If you have a network (Ethernet) card belonging to this class, say Y.


            	  Note that the answer to this question doesn't directly affect the

            
            	  kernel: saying N will just cause the configurator to skip all

            
            	  the questions about Intel cards. If you say Y, you will be asked for

            
            	  your specific card in the following questions.


            if NET_VENDOR_INTEL


            config E100

            
            	tristate "Intel(R) PRO/100+ support"

            
            	depends on PCI

            
            	select MII

            
            	---help---

            
            	  This driver supports Intel(R) PRO/100 family of adapters.

            
            	  To verify that your adapter is supported, find the board ID number

            
            	  on the adapter. Look for a label that has a barcode and a number

            
            	  in the format 123456-001 (six digits hyphen three digits).


            	  Use the above information and the Adapter & Driver ID Guide that

            
            	  can be located at:


            	  <http://support.intel.com>


            	  to identify the adapter.


            	  More specific information on configuring the driver is in

            
            	  <file:Documentation/networking/e100.txt>.


            	  To compile this driver as a module, choose M here. The module

            
            	  will be called e100.


            config E1000

            
            	tristate "Intel(R) PRO/1000 Gigabit Ethernet support"

            
            	depends on PCI

            
            	---help---

            
            	  This driver supports Intel(R) PRO/1000 gigabit ethernet family of

            
            	  adapters.  For more information on how to identify your adapter, go

            
            	  to the Adapter & Driver ID Guide that can be located at:


            	  <http://support.intel.com>


            	  More specific information on configuring the driver is in

            
            	  <file:Documentation/networking/e1000.txt>.


            	  To compile this driver as a module, choose M here. The module

            
            	  will be called e1000.


            config E1000E

            
            	tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"

            
            	depends on PCI && (!SPARC32 || BROKEN)

            
            	select CRC32

            
            	select PTP_1588_CLOCK

            
            	---help---

            
            	  This driver supports the PCI-Express Intel(R) PRO/1000 gigabit

            
            	  ethernet family of adapters. For PCI or PCI-X e1000 adapters,

            
            	  use the regular e1000 driver For more information on how to

            
            	  identify your adapter, go to the Adapter & Driver ID Guide that

            
            	  can be located at:


            	  <http://support.intel.com>


            	  To compile this driver as a module, choose M here. The module

            
            	  will be called e1000e.


            config E1000E_HWTS

            
            	bool "Support HW cross-timestamp on PCH devices"

            
            	default y

            
            	depends on E1000E && X86

            
            	---help---

            
            	 Say Y to enable hardware supported cross-timestamping on PCH

            
            	 devices. The cross-timestamp is available through the PTP clock

            
            	 driver precise cross-timestamp ioctl (PTP_SYS_OFFSET_PRECISE).


            config IGB

            
            	tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"

            
            	depends on PCI

            
            	select PTP_1588_CLOCK

            
            	select I2C

            
            	select I2C_ALGOBIT

            
            	---help---

            
            	  This driver supports Intel(R) 82575/82576 gigabit ethernet family of

            
            	  adapters.  For more information on how to identify your adapter, go

            
            	  to the Adapter & Driver ID Guide that can be located at:


            	  <http://support.intel.com>


            	  More specific information on configuring the driver is in

            
            	  <file:Documentation/networking/e1000.txt>.


            	  To compile this driver as a module, choose M here. The module

            
            	  will be called igb.


            config IGB_HWMON

            
            	bool "Intel(R) PCI-Express Gigabit adapters HWMON support"

            
            	default y

            
            	depends on IGB && HWMON && !(IGB=y && HWMON=m)

            
            	---help---

            
            	  Say Y if you want to expose thermal sensor data on Intel devices.


            	  Some of our devices contain thermal sensors, both external and internal.

            
            	  This data is available via the hwmon sysfs interface and exposes

            
            	  the onboard sensors.


            config IGB_DCA

            
            	bool "Direct Cache Access (DCA) Support"

            
            	default y

            
            	depends on IGB && DCA && !(IGB=y && DCA=m)

            
            	---help---

            
            	  Say Y here if you want to use Direct Cache Access (DCA) in the

            
            	  driver.  DCA is a method for warming the CPU cache before data

            
            	  is used, with the intent of lessening the impact of cache misses.


            config IGBVF

            
            	tristate "Intel(R) 82576 Virtual Function Ethernet support"

            
            	depends on PCI

            
            	---help---

            
            	  This driver supports Intel(R) 82576 virtual functions.  For more

            
            	  information on how to identify your adapter, go to the Adapter &

            
            	  Driver ID Guide that can be located at:


            	  <http://support.intel.com>


            	  More specific information on configuring the driver is in

            
            	  <file:Documentation/networking/e1000.txt>.


            	  To compile this driver as a module, choose M here. The module

            
            	  will be called igbvf.


            config IXGB

            
            	tristate "Intel(R) PRO/10GbE support"

            
            	depends on PCI

            
            	---help---

            
            	  This driver supports Intel(R) PRO/10GbE family of adapters for

            
            	  PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver

            
            	  instead. For more information on how to identify your adapter, go

            
            	  to the Adapter & Driver ID Guide that can be located at:


            	  <http://support.intel.com>


            	  More specific information on configuring the driver is in

            
            	  <file:Documentation/networking/ixgb.txt>.


            	  To compile this driver as a module, choose M here. The module

            
            	  will be called ixgb.


            config IXGBE

            
            	tristate "Intel(R) 10GbE PCI Express adapters support"

            
            	depends on PCI

            
            	select MDIO

            
            	select PTP_1588_CLOCK

            
            	---help---

            
            	  This driver supports Intel(R) 10GbE PCI Express family of

            
            	  adapters.  For more information on how to identify your adapter, go

            
            	  to the Adapter & Driver ID Guide that can be located at:


            	  <http://support.intel.com>


            	  To compile this driver as a module, choose M here. The module

            
            	  will be called ixgbe.


            config IXGBE_HWMON

            
            	bool "Intel(R) 10GbE PCI Express adapters HWMON support"

            
            	default y

            
            	depends on IXGBE && HWMON && !(IXGBE=y && HWMON=m)

            
            	---help---

            
            	  Say Y if you want to expose the thermal sensor data on some of

            
            	  our cards, via a hwmon sysfs interface.


            config IXGBE_DCA

            
            	bool "Direct Cache Access (DCA) Support"

            
            	default y

            
            	depends on IXGBE && DCA && !(IXGBE=y && DCA=m)

            
            	---help---

            
            	  Say Y here if you want to use Direct Cache Access (DCA) in the

            
            	  driver.  DCA is a method for warming the CPU cache before data

            
            	  is used, with the intent of lessening the impact of cache misses.


            config IXGBE_DCB

            
            	bool "Data Center Bridging (DCB) Support"

            
            	default n

            
            	depends on IXGBE && DCB

            
            	---help---

            
            	  Say Y here if you want to use Data Center Bridging (DCB) in the

            
            	  driver.


            	  If unsure, say N.


            config IXGBEVF

            
            	tristate "Intel(R) 10GbE PCI Express Virtual Function Ethernet support"

            
            	depends on PCI_MSI

            
            	---help---

            
            	  This driver supports Intel(R) PCI Express virtual functions for the

            
            	  Intel(R) ixgbe driver.  For more information on how to identify your

            
            	  adapter, go to the Adapter & Driver ID Guide that can be located at:


            	  <http://support.intel.com>


            	  More specific information on configuring the driver is in

            
            	  <file:Documentation/networking/ixgbevf.txt>.


            	  To compile this driver as a module, choose M here. The module

            
            	  will be called ixgbevf.  MSI-X interrupt support is required

            
            	  for this driver to work correctly.


            config I40E

            
            	tristate "Intel(R) Ethernet Controller XL710 Family support"

            
            	select PTP_1588_CLOCK

            
            	depends on PCI

            
            	---help---

            
            	  This driver supports Intel(R) Ethernet Controller XL710 Family of

            
            	  devices.  For more information on how to identify your adapter, go

            
            	  to the Adapter & Driver ID Guide that can be located at:


            	  <http://support.intel.com>


            	  To compile this driver as a module, choose M here. The module

            
            	  will be called i40e.


            config I40E_DCB

            
            	bool "Data Center Bridging (DCB) Support"

            
            	default n

            
            	depends on I40E && DCB

            
            	---help---

            
            	  Say Y here if you want to use Data Center Bridging (DCB) in the

            
            	  driver.


            	  If unsure, say N.


            config I40E_FCOE

            
            	bool "Fibre Channel over Ethernet (FCoE)"

            
            	default n

            
            	depends on I40E && DCB && FCOE

            
            	---help---

            
            	  Say Y here if you want to use Fibre Channel over Ethernet (FCoE)

            
            	  in the driver. This will create new netdev for exclusive FCoE

            
            	  use with XL710 FCoE offloads enabled.


            	  If unsure, say N.


            config I40EVF

            
            	tristate "Intel(R) XL710 X710 Virtual Function Ethernet support"

            
            	depends on PCI_MSI

            
            	---help---

            
            	  This driver supports Intel(R) XL710 and X710 virtual functions.

            
            	  For more information on how to identify your adapter, go to the

            
            	  Adapter & Driver ID Guide that can be located at:


            	  <http://support.intel.com>


            	  To compile this driver as a module, choose M here. The module

            
            	  will be called i40evf.  MSI-X interrupt support is required

            
            	  for this driver to work correctly.


            config FM10K

            
            	tristate "Intel(R) FM10000 Ethernet Switch Host Interface Support"

            
            	default n

            
            	depends on PCI_MSI

            
            	select PTP_1588_CLOCK

            
            	---help---

            
            	  This driver supports Intel(R) FM10000 Ethernet Switch Host

            
            	  Interface.  For more information on how to identify your adapter,

            
            	  go to the Adapter & Driver ID Guide that can be located at:


            	  <http://support.intel.com>


            	  To compile this driver as a module, choose M here. The module

            
            	  will be called fm10k.  MSI-X interrupt support is required


            endif # NET_VENDOR_INTEL
	#
	# Intel network device configuration
	#

	config NET_VENDOR_INTEL
	bool "Intel devices"
	default y
	---help---
	If you have a network (Ethernet) card belonging to this class, say Y.

	Note that the answer to this question doesn't directly affect the
	kernel: saying N will just cause the configurator to skip all
	the questions about Intel cards. If you say Y, you will be asked for
	your specific card in the following questions.

	if NET_VENDOR_INTEL

	config E100
	tristate "Intel(R) PRO/100+ support"
	depends on PCI
	select MII
	---help---
	This driver supports Intel(R) PRO/100 family of adapters.
	To verify that your adapter is supported, find the board ID number
	on the adapter. Look for a label that has a barcode and a number
	in the format 123456-001 (six digits hyphen three digits).

	Use the above information and the Adapter & Driver ID Guide that
	can be located at:

	<http://support.intel.com>

	to identify the adapter.

	More specific information on configuring the driver is in
	<file:Documentation/networking/e100.txt>.

	To compile this driver as a module, choose M here. The module
	will be called e100.

	config E1000
	tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
	depends on PCI
	---help---
	This driver supports Intel(R) PRO/1000 gigabit ethernet family of
	adapters. For more information on how to identify your adapter, go
	to the Adapter & Driver ID Guide that can be located at:

	<http://support.intel.com>

	More specific information on configuring the driver is in
	<file:Documentation/networking/e1000.txt>.

	To compile this driver as a module, choose M here. The module
	will be called e1000.

	config E1000E
	tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
	depends on PCI && (!SPARC32 \|\| BROKEN)
	select CRC32
	select PTP_1588_CLOCK
	---help---
	This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
	ethernet family of adapters. For PCI or PCI-X e1000 adapters,
	use the regular e1000 driver For more information on how to
	identify your adapter, go to the Adapter & Driver ID Guide that
	can be located at:

	<http://support.intel.com>

	To compile this driver as a module, choose M here. The module
	will be called e1000e.

	config E1000E_HWTS
	bool "Support HW cross-timestamp on PCH devices"
	default y
	depends on E1000E && X86
	---help---
	Say Y to enable hardware supported cross-timestamping on PCH
	devices. The cross-timestamp is available through the PTP clock
	driver precise cross-timestamp ioctl (PTP_SYS_OFFSET_PRECISE).

	config IGB
	tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
	depends on PCI
	select PTP_1588_CLOCK
	select I2C
	select I2C_ALGOBIT
	---help---
	This driver supports Intel(R) 82575/82576 gigabit ethernet family of
	adapters. For more information on how to identify your adapter, go
	to the Adapter & Driver ID Guide that can be located at:

	<http://support.intel.com>

	More specific information on configuring the driver is in
	<file:Documentation/networking/e1000.txt>.

	To compile this driver as a module, choose M here. The module
	will be called igb.

	config IGB_HWMON
	bool "Intel(R) PCI-Express Gigabit adapters HWMON support"
	default y
	depends on IGB && HWMON && !(IGB=y && HWMON=m)
	---help---
	Say Y if you want to expose thermal sensor data on Intel devices.

	Some of our devices contain thermal sensors, both external and internal.
	This data is available via the hwmon sysfs interface and exposes
	the onboard sensors.

	config IGB_DCA
	bool "Direct Cache Access (DCA) Support"
	default y
	depends on IGB && DCA && !(IGB=y && DCA=m)
	---help---
	Say Y here if you want to use Direct Cache Access (DCA) in the
	driver. DCA is a method for warming the CPU cache before data
	is used, with the intent of lessening the impact of cache misses.

	config IGBVF
	tristate "Intel(R) 82576 Virtual Function Ethernet support"
	depends on PCI
	---help---
	This driver supports Intel(R) 82576 virtual functions. For more
	information on how to identify your adapter, go to the Adapter &
	Driver ID Guide that can be located at:

	<http://support.intel.com>

	More specific information on configuring the driver is in
	<file:Documentation/networking/e1000.txt>.

	To compile this driver as a module, choose M here. The module
	will be called igbvf.

	config IXGB
	tristate "Intel(R) PRO/10GbE support"
	depends on PCI
	---help---
	This driver supports Intel(R) PRO/10GbE family of adapters for
	PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
	instead. For more information on how to identify your adapter, go
	to the Adapter & Driver ID Guide that can be located at:

	<http://support.intel.com>

	More specific information on configuring the driver is in
	<file:Documentation/networking/ixgb.txt>.

	To compile this driver as a module, choose M here. The module
	will be called ixgb.

	config IXGBE
	tristate "Intel(R) 10GbE PCI Express adapters support"
	depends on PCI
	select MDIO
	select PTP_1588_CLOCK
	---help---
	This driver supports Intel(R) 10GbE PCI Express family of
	adapters. For more information on how to identify your adapter, go
	to the Adapter & Driver ID Guide that can be located at:

	<http://support.intel.com>

	To compile this driver as a module, choose M here. The module
	will be called ixgbe.

	config IXGBE_HWMON
	bool "Intel(R) 10GbE PCI Express adapters HWMON support"
	default y
	depends on IXGBE && HWMON && !(IXGBE=y && HWMON=m)
	---help---
	Say Y if you want to expose the thermal sensor data on some of
	our cards, via a hwmon sysfs interface.

	config IXGBE_DCA
	bool "Direct Cache Access (DCA) Support"
	default y
	depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
	---help---
	Say Y here if you want to use Direct Cache Access (DCA) in the
	driver. DCA is a method for warming the CPU cache before data
	is used, with the intent of lessening the impact of cache misses.

	config IXGBE_DCB
	bool "Data Center Bridging (DCB) Support"
	default n
	depends on IXGBE && DCB
	---help---
	Say Y here if you want to use Data Center Bridging (DCB) in the
	driver.

	If unsure, say N.

	config IXGBEVF
	tristate "Intel(R) 10GbE PCI Express Virtual Function Ethernet support"
	depends on PCI_MSI
	---help---
	This driver supports Intel(R) PCI Express virtual functions for the
	Intel(R) ixgbe driver. For more information on how to identify your
	adapter, go to the Adapter & Driver ID Guide that can be located at:

	<http://support.intel.com>

	More specific information on configuring the driver is in
	<file:Documentation/networking/ixgbevf.txt>.

	To compile this driver as a module, choose M here. The module
	will be called ixgbevf. MSI-X interrupt support is required
	for this driver to work correctly.

	config I40E
	tristate "Intel(R) Ethernet Controller XL710 Family support"
	select PTP_1588_CLOCK
	depends on PCI
	---help---
	This driver supports Intel(R) Ethernet Controller XL710 Family of
	devices. For more information on how to identify your adapter, go
	to the Adapter & Driver ID Guide that can be located at:

	<http://support.intel.com>

	To compile this driver as a module, choose M here. The module
	will be called i40e.

	config I40E_DCB
	bool "Data Center Bridging (DCB) Support"
	default n
	depends on I40E && DCB
	---help---
	Say Y here if you want to use Data Center Bridging (DCB) in the
	driver.

	If unsure, say N.

	config I40E_FCOE
	bool "Fibre Channel over Ethernet (FCoE)"
	default n
	depends on I40E && DCB && FCOE
	---help---
	Say Y here if you want to use Fibre Channel over Ethernet (FCoE)
	in the driver. This will create new netdev for exclusive FCoE
	use with XL710 FCoE offloads enabled.

	If unsure, say N.

	config I40EVF
	tristate "Intel(R) XL710 X710 Virtual Function Ethernet support"
	depends on PCI_MSI
	---help---
	This driver supports Intel(R) XL710 and X710 virtual functions.
	For more information on how to identify your adapter, go to the
	Adapter & Driver ID Guide that can be located at:

	<http://support.intel.com>

	To compile this driver as a module, choose M here. The module
	will be called i40evf. MSI-X interrupt support is required
	for this driver to work correctly.

	config FM10K
	tristate "Intel(R) FM10000 Ethernet Switch Host Interface Support"
	default n
	depends on PCI_MSI
	select PTP_1588_CLOCK
	---help---
	This driver supports Intel(R) FM10000 Ethernet Switch Host
	Interface. For more information on how to identify your adapter,
	go to the Adapter & Driver ID Guide that can be located at:

	<http://support.intel.com>

	To compile this driver as a module, choose M here. The module
	will be called fm10k. MSI-X interrupt support is required

	endif # NET_VENDOR_INTEL