| /* Intel(R) Ethernet Switch Host Interface Driver | |
| * Copyright(c) 2013 - 2016 Intel Corporation. | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms and conditions of the GNU General Public License, | |
| * version 2, as published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope it will be useful, but WITHOUT | |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
| * more details. | |
| * | |
| * The full GNU General Public License is included in this distribution in | |
| * the file called "COPYING". | |
| * | |
| * Contact Information: | |
| * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> | |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | |
| */ | |
| #include "fm10k_common.h" | |
| /** | |
| * fm10k_get_bus_info_generic - Generic set PCI bus info | |
| * @hw: pointer to hardware structure | |
| * | |
| * Gets the PCI bus info (speed, width, type) then calls helper function to | |
| * store this data within the fm10k_hw structure. | |
| **/ | |
| s32 fm10k_get_bus_info_generic(struct fm10k_hw *hw) | |
| { | |
| u16 link_cap, link_status, device_cap, device_control; | |
| /* Get the maximum link width and speed from PCIe config space */ | |
| link_cap = fm10k_read_pci_cfg_word(hw, FM10K_PCIE_LINK_CAP); | |
| switch (link_cap & FM10K_PCIE_LINK_WIDTH) { | |
| case FM10K_PCIE_LINK_WIDTH_1: | |
| hw->bus_caps.width = fm10k_bus_width_pcie_x1; | |
| break; | |
| case FM10K_PCIE_LINK_WIDTH_2: | |
| hw->bus_caps.width = fm10k_bus_width_pcie_x2; | |
| break; | |
| case FM10K_PCIE_LINK_WIDTH_4: | |
| hw->bus_caps.width = fm10k_bus_width_pcie_x4; | |
| break; | |
| case FM10K_PCIE_LINK_WIDTH_8: | |
| hw->bus_caps.width = fm10k_bus_width_pcie_x8; | |
| break; | |
| default: | |
| hw->bus_caps.width = fm10k_bus_width_unknown; | |
| break; | |
| } | |
| switch (link_cap & FM10K_PCIE_LINK_SPEED) { | |
| case FM10K_PCIE_LINK_SPEED_2500: | |
| hw->bus_caps.speed = fm10k_bus_speed_2500; | |
| break; | |
| case FM10K_PCIE_LINK_SPEED_5000: | |
| hw->bus_caps.speed = fm10k_bus_speed_5000; | |
| break; | |
| case FM10K_PCIE_LINK_SPEED_8000: | |
| hw->bus_caps.speed = fm10k_bus_speed_8000; | |
| break; | |
| default: | |
| hw->bus_caps.speed = fm10k_bus_speed_unknown; | |
| break; | |
| } | |
| /* Get the PCIe maximum payload size for the PCIe function */ | |
| device_cap = fm10k_read_pci_cfg_word(hw, FM10K_PCIE_DEV_CAP); | |
| switch (device_cap & FM10K_PCIE_DEV_CAP_PAYLOAD) { | |
| case FM10K_PCIE_DEV_CAP_PAYLOAD_128: | |
| hw->bus_caps.payload = fm10k_bus_payload_128; | |
| break; | |
| case FM10K_PCIE_DEV_CAP_PAYLOAD_256: | |
| hw->bus_caps.payload = fm10k_bus_payload_256; | |
| break; | |
| case FM10K_PCIE_DEV_CAP_PAYLOAD_512: | |
| hw->bus_caps.payload = fm10k_bus_payload_512; | |
| break; | |
| default: | |
| hw->bus_caps.payload = fm10k_bus_payload_unknown; | |
| break; | |
| } | |
| /* Get the negotiated link width and speed from PCIe config space */ | |
| link_status = fm10k_read_pci_cfg_word(hw, FM10K_PCIE_LINK_STATUS); | |
| switch (link_status & FM10K_PCIE_LINK_WIDTH) { | |
| case FM10K_PCIE_LINK_WIDTH_1: | |
| hw->bus.width = fm10k_bus_width_pcie_x1; | |
| break; | |
| case FM10K_PCIE_LINK_WIDTH_2: | |
| hw->bus.width = fm10k_bus_width_pcie_x2; | |
| break; | |
| case FM10K_PCIE_LINK_WIDTH_4: | |
| hw->bus.width = fm10k_bus_width_pcie_x4; | |
| break; | |
| case FM10K_PCIE_LINK_WIDTH_8: | |
| hw->bus.width = fm10k_bus_width_pcie_x8; | |
| break; | |
| default: | |
| hw->bus.width = fm10k_bus_width_unknown; | |
| break; | |
| } | |
| switch (link_status & FM10K_PCIE_LINK_SPEED) { | |
| case FM10K_PCIE_LINK_SPEED_2500: | |
| hw->bus.speed = fm10k_bus_speed_2500; | |
| break; | |
| case FM10K_PCIE_LINK_SPEED_5000: | |
| hw->bus.speed = fm10k_bus_speed_5000; | |
| break; | |
| case FM10K_PCIE_LINK_SPEED_8000: | |
| hw->bus.speed = fm10k_bus_speed_8000; | |
| break; | |
| default: | |
| hw->bus.speed = fm10k_bus_speed_unknown; | |
| break; | |
| } | |
| /* Get the negotiated PCIe maximum payload size for the PCIe function */ | |
| device_control = fm10k_read_pci_cfg_word(hw, FM10K_PCIE_DEV_CTRL); | |
| switch (device_control & FM10K_PCIE_DEV_CTRL_PAYLOAD) { | |
| case FM10K_PCIE_DEV_CTRL_PAYLOAD_128: | |
| hw->bus.payload = fm10k_bus_payload_128; | |
| break; | |
| case FM10K_PCIE_DEV_CTRL_PAYLOAD_256: | |
| hw->bus.payload = fm10k_bus_payload_256; | |
| break; | |
| case FM10K_PCIE_DEV_CTRL_PAYLOAD_512: | |
| hw->bus.payload = fm10k_bus_payload_512; | |
| break; | |
| default: | |
| hw->bus.payload = fm10k_bus_payload_unknown; | |
| break; | |
| } | |
| return 0; | |
| } | |
| static u16 fm10k_get_pcie_msix_count_generic(struct fm10k_hw *hw) | |
| { | |
| u16 msix_count; | |
| /* read in value from MSI-X capability register */ | |
| msix_count = fm10k_read_pci_cfg_word(hw, FM10K_PCI_MSIX_MSG_CTRL); | |
| msix_count &= FM10K_PCI_MSIX_MSG_CTRL_TBL_SZ_MASK; | |
| /* MSI-X count is zero-based in HW */ | |
| msix_count++; | |
| if (msix_count > FM10K_MAX_MSIX_VECTORS) | |
| msix_count = FM10K_MAX_MSIX_VECTORS; | |
| return msix_count; | |
| } | |
| /** | |
| * fm10k_get_invariants_generic - Inits constant values | |
| * @hw: pointer to the hardware structure | |
| * | |
| * Initialize the common invariants for the device. | |
| **/ | |
| s32 fm10k_get_invariants_generic(struct fm10k_hw *hw) | |
| { | |
| struct fm10k_mac_info *mac = &hw->mac; | |
| /* initialize GLORT state to avoid any false hits */ | |
| mac->dglort_map = FM10K_DGLORTMAP_NONE; | |
| /* record maximum number of MSI-X vectors */ | |
| mac->max_msix_vectors = fm10k_get_pcie_msix_count_generic(hw); | |
| return 0; | |
| } | |
| /** | |
| * fm10k_start_hw_generic - Prepare hardware for Tx/Rx | |
| * @hw: pointer to hardware structure | |
| * | |
| * This function sets the Tx ready flag to indicate that the Tx path has | |
| * been initialized. | |
| **/ | |
| s32 fm10k_start_hw_generic(struct fm10k_hw *hw) | |
| { | |
| /* set flag indicating we are beginning Tx */ | |
| hw->mac.tx_ready = true; | |
| return 0; | |
| } | |
| /** | |
| * fm10k_disable_queues_generic - Stop Tx/Rx queues | |
| * @hw: pointer to hardware structure | |
| * @q_cnt: number of queues to be disabled | |
| * | |
| **/ | |
| s32 fm10k_disable_queues_generic(struct fm10k_hw *hw, u16 q_cnt) | |
| { | |
| u32 reg; | |
| u16 i, time; | |
| /* clear tx_ready to prevent any false hits for reset */ | |
| hw->mac.tx_ready = false; | |
| if (FM10K_REMOVED(hw->hw_addr)) | |
| return 0; | |
| /* clear the enable bit for all rings */ | |
| for (i = 0; i < q_cnt; i++) { | |
| reg = fm10k_read_reg(hw, FM10K_TXDCTL(i)); | |
| fm10k_write_reg(hw, FM10K_TXDCTL(i), | |
| reg & ~FM10K_TXDCTL_ENABLE); | |
| reg = fm10k_read_reg(hw, FM10K_RXQCTL(i)); | |
| fm10k_write_reg(hw, FM10K_RXQCTL(i), | |
| reg & ~FM10K_RXQCTL_ENABLE); | |
| } | |
| fm10k_write_flush(hw); | |
| udelay(1); | |
| /* loop through all queues to verify that they are all disabled */ | |
| for (i = 0, time = FM10K_QUEUE_DISABLE_TIMEOUT; time;) { | |
| /* if we are at end of rings all rings are disabled */ | |
| if (i == q_cnt) | |
| return 0; | |
| /* if queue enables cleared, then move to next ring pair */ | |
| reg = fm10k_read_reg(hw, FM10K_TXDCTL(i)); | |
| if (!~reg || !(reg & FM10K_TXDCTL_ENABLE)) { | |
| reg = fm10k_read_reg(hw, FM10K_RXQCTL(i)); | |
| if (!~reg || !(reg & FM10K_RXQCTL_ENABLE)) { | |
| i++; | |
| continue; | |
| } | |
| } | |
| /* decrement time and wait 1 usec */ | |
| time--; | |
| if (time) | |
| udelay(1); | |
| } | |
| return FM10K_ERR_REQUESTS_PENDING; | |
| } | |
| /** | |
| * fm10k_stop_hw_generic - Stop Tx/Rx units | |
| * @hw: pointer to hardware structure | |
| * | |
| **/ | |
| s32 fm10k_stop_hw_generic(struct fm10k_hw *hw) | |
| { | |
| return fm10k_disable_queues_generic(hw, hw->mac.max_queues); | |
| } | |
| /** | |
| * fm10k_read_hw_stats_32b - Reads value of 32-bit registers | |
| * @hw: pointer to the hardware structure | |
| * @addr: address of register containing a 32-bit value | |
| * | |
| * Function reads the content of the register and returns the delta | |
| * between the base and the current value. | |
| * **/ | |
| u32 fm10k_read_hw_stats_32b(struct fm10k_hw *hw, u32 addr, | |
| struct fm10k_hw_stat *stat) | |
| { | |
| u32 delta = fm10k_read_reg(hw, addr) - stat->base_l; | |
| if (FM10K_REMOVED(hw->hw_addr)) | |
| stat->base_h = 0; | |
| return delta; | |
| } | |
| /** | |
| * fm10k_read_hw_stats_48b - Reads value of 48-bit registers | |
| * @hw: pointer to the hardware structure | |
| * @addr: address of register containing the lower 32-bit value | |
| * | |
| * Function reads the content of 2 registers, combined to represent a 48-bit | |
| * statistical value. Extra processing is required to handle overflowing. | |
| * Finally, a delta value is returned representing the difference between the | |
| * values stored in registers and values stored in the statistic counters. | |
| * **/ | |
| static u64 fm10k_read_hw_stats_48b(struct fm10k_hw *hw, u32 addr, | |
| struct fm10k_hw_stat *stat) | |
| { | |
| u32 count_l; | |
| u32 count_h; | |
| u32 count_tmp; | |
| u64 delta; | |
| count_h = fm10k_read_reg(hw, addr + 1); | |
| /* Check for overflow */ | |
| do { | |
| count_tmp = count_h; | |
| count_l = fm10k_read_reg(hw, addr); | |
| count_h = fm10k_read_reg(hw, addr + 1); | |
| } while (count_h != count_tmp); | |
| delta = ((u64)(count_h - stat->base_h) << 32) + count_l; | |
| delta -= stat->base_l; | |
| return delta & FM10K_48_BIT_MASK; | |
| } | |
| /** | |
| * fm10k_update_hw_base_48b - Updates 48-bit statistic base value | |
| * @stat: pointer to the hardware statistic structure | |
| * @delta: value to be updated into the hardware statistic structure | |
| * | |
| * Function receives a value and determines if an update is required based on | |
| * a delta calculation. Only the base value will be updated. | |
| **/ | |
| static void fm10k_update_hw_base_48b(struct fm10k_hw_stat *stat, u64 delta) | |
| { | |
| if (!delta) | |
| return; | |
| /* update lower 32 bits */ | |
| delta += stat->base_l; | |
| stat->base_l = (u32)delta; | |
| /* update upper 32 bits */ | |
| stat->base_h += (u32)(delta >> 32); | |
| } | |
| /** | |
| * fm10k_update_hw_stats_tx_q - Updates TX queue statistics counters | |
| * @hw: pointer to the hardware structure | |
| * @q: pointer to the ring of hardware statistics queue | |
| * @idx: index pointing to the start of the ring iteration | |
| * | |
| * Function updates the TX queue statistics counters that are related to the | |
| * hardware. | |
| **/ | |
| static void fm10k_update_hw_stats_tx_q(struct fm10k_hw *hw, | |
| struct fm10k_hw_stats_q *q, | |
| u32 idx) | |
| { | |
| u32 id_tx, id_tx_prev, tx_packets; | |
| u64 tx_bytes = 0; | |
| /* Retrieve TX Owner Data */ | |
| id_tx = fm10k_read_reg(hw, FM10K_TXQCTL(idx)); | |
| /* Process TX Ring */ | |
| do { | |
| tx_packets = fm10k_read_hw_stats_32b(hw, FM10K_QPTC(idx), | |
| &q->tx_packets); | |
| if (tx_packets) | |
| tx_bytes = fm10k_read_hw_stats_48b(hw, | |
| FM10K_QBTC_L(idx), | |
| &q->tx_bytes); | |
| /* Re-Check Owner Data */ | |
| id_tx_prev = id_tx; | |
| id_tx = fm10k_read_reg(hw, FM10K_TXQCTL(idx)); | |
| } while ((id_tx ^ id_tx_prev) & FM10K_TXQCTL_ID_MASK); | |
| /* drop non-ID bits and set VALID ID bit */ | |
| id_tx &= FM10K_TXQCTL_ID_MASK; | |
| id_tx |= FM10K_STAT_VALID; | |
| /* update packet counts */ | |
| if (q->tx_stats_idx == id_tx) { | |
| q->tx_packets.count += tx_packets; | |
| q->tx_bytes.count += tx_bytes; | |
| } | |
| /* update bases and record ID */ | |
| fm10k_update_hw_base_32b(&q->tx_packets, tx_packets); | |
| fm10k_update_hw_base_48b(&q->tx_bytes, tx_bytes); | |
| q->tx_stats_idx = id_tx; | |
| } | |
| /** | |
| * fm10k_update_hw_stats_rx_q - Updates RX queue statistics counters | |
| * @hw: pointer to the hardware structure | |
| * @q: pointer to the ring of hardware statistics queue | |
| * @idx: index pointing to the start of the ring iteration | |
| * | |
| * Function updates the RX queue statistics counters that are related to the | |
| * hardware. | |
| **/ | |
| static void fm10k_update_hw_stats_rx_q(struct fm10k_hw *hw, | |
| struct fm10k_hw_stats_q *q, | |
| u32 idx) | |
| { | |
| u32 id_rx, id_rx_prev, rx_packets, rx_drops; | |
| u64 rx_bytes = 0; | |
| /* Retrieve RX Owner Data */ | |
| id_rx = fm10k_read_reg(hw, FM10K_RXQCTL(idx)); | |
| /* Process RX Ring */ | |
| do { | |
| rx_drops = fm10k_read_hw_stats_32b(hw, FM10K_QPRDC(idx), | |
| &q->rx_drops); | |
| rx_packets = fm10k_read_hw_stats_32b(hw, FM10K_QPRC(idx), | |
| &q->rx_packets); | |
| if (rx_packets) | |
| rx_bytes = fm10k_read_hw_stats_48b(hw, | |
| FM10K_QBRC_L(idx), | |
| &q->rx_bytes); | |
| /* Re-Check Owner Data */ | |
| id_rx_prev = id_rx; | |
| id_rx = fm10k_read_reg(hw, FM10K_RXQCTL(idx)); | |
| } while ((id_rx ^ id_rx_prev) & FM10K_RXQCTL_ID_MASK); | |
| /* drop non-ID bits and set VALID ID bit */ | |
| id_rx &= FM10K_RXQCTL_ID_MASK; | |
| id_rx |= FM10K_STAT_VALID; | |
| /* update packet counts */ | |
| if (q->rx_stats_idx == id_rx) { | |
| q->rx_drops.count += rx_drops; | |
| q->rx_packets.count += rx_packets; | |
| q->rx_bytes.count += rx_bytes; | |
| } | |
| /* update bases and record ID */ | |
| fm10k_update_hw_base_32b(&q->rx_drops, rx_drops); | |
| fm10k_update_hw_base_32b(&q->rx_packets, rx_packets); | |
| fm10k_update_hw_base_48b(&q->rx_bytes, rx_bytes); | |
| q->rx_stats_idx = id_rx; | |
| } | |
| /** | |
| * fm10k_update_hw_stats_q - Updates queue statistics counters | |
| * @hw: pointer to the hardware structure | |
| * @q: pointer to the ring of hardware statistics queue | |
| * @idx: index pointing to the start of the ring iteration | |
| * @count: number of queues to iterate over | |
| * | |
| * Function updates the queue statistics counters that are related to the | |
| * hardware. | |
| **/ | |
| void fm10k_update_hw_stats_q(struct fm10k_hw *hw, struct fm10k_hw_stats_q *q, | |
| u32 idx, u32 count) | |
| { | |
| u32 i; | |
| for (i = 0; i < count; i++, idx++, q++) { | |
| fm10k_update_hw_stats_tx_q(hw, q, idx); | |
| fm10k_update_hw_stats_rx_q(hw, q, idx); | |
| } | |
| } | |
| /** | |
| * fm10k_unbind_hw_stats_q - Unbind the queue counters from their queues | |
| * @hw: pointer to the hardware structure | |
| * @q: pointer to the ring of hardware statistics queue | |
| * @idx: index pointing to the start of the ring iteration | |
| * @count: number of queues to iterate over | |
| * | |
| * Function invalidates the index values for the queues so any updates that | |
| * may have happened are ignored and the base for the queue stats is reset. | |
| **/ | |
| void fm10k_unbind_hw_stats_q(struct fm10k_hw_stats_q *q, u32 idx, u32 count) | |
| { | |
| u32 i; | |
| for (i = 0; i < count; i++, idx++, q++) { | |
| q->rx_stats_idx = 0; | |
| q->tx_stats_idx = 0; | |
| } | |
| } | |
| /** | |
| * fm10k_get_host_state_generic - Returns the state of the host | |
| * @hw: pointer to hardware structure | |
| * @host_ready: pointer to boolean value that will record host state | |
| * | |
| * This function will check the health of the mailbox and Tx queue 0 | |
| * in order to determine if we should report that the link is up or not. | |
| **/ | |
| s32 fm10k_get_host_state_generic(struct fm10k_hw *hw, bool *host_ready) | |
| { | |
| struct fm10k_mbx_info *mbx = &hw->mbx; | |
| struct fm10k_mac_info *mac = &hw->mac; | |
| s32 ret_val = 0; | |
| u32 txdctl = fm10k_read_reg(hw, FM10K_TXDCTL(0)); | |
| /* process upstream mailbox in case interrupts were disabled */ | |
| mbx->ops.process(hw, mbx); | |
| /* If Tx is no longer enabled link should come down */ | |
| if (!(~txdctl) || !(txdctl & FM10K_TXDCTL_ENABLE)) | |
| mac->get_host_state = true; | |
| /* exit if not checking for link, or link cannot be changed */ | |
| if (!mac->get_host_state || !(~txdctl)) | |
| goto out; | |
| /* if we somehow dropped the Tx enable we should reset */ | |
| if (hw->mac.tx_ready && !(txdctl & FM10K_TXDCTL_ENABLE)) { | |
| ret_val = FM10K_ERR_RESET_REQUESTED; | |
| goto out; | |
| } | |
| /* if Mailbox timed out we should request reset */ | |
| if (!mbx->timeout) { | |
| ret_val = FM10K_ERR_RESET_REQUESTED; | |
| goto out; | |
| } | |
| /* verify Mailbox is still valid */ | |
| if (!mbx->ops.tx_ready(mbx, FM10K_VFMBX_MSG_MTU)) | |
| goto out; | |
| /* interface cannot receive traffic without logical ports */ | |
| if (mac->dglort_map == FM10K_DGLORTMAP_NONE) { | |
| if (hw->mac.ops.request_lport_map) | |
| ret_val = hw->mac.ops.request_lport_map(hw); | |
| goto out; | |
| } | |
| /* if we passed all the tests above then the switch is ready and we no | |
| * longer need to check for link | |
| */ | |
| mac->get_host_state = false; | |
| out: | |
| *host_ready = !mac->get_host_state; | |
| return ret_val; | |
| } |