| config STMMAC_ETH | |
| tristate "STMicroelectronics 10/100/1000 Ethernet driver" | |
| depends on HAS_IOMEM && HAS_DMA | |
| select MII | |
| select PHYLIB | |
| select CRC32 | |
| select PTP_1588_CLOCK | |
| select RESET_CONTROLLER | |
| ---help--- | |
| This is the driver for the Ethernet IPs are built around a | |
| Synopsys IP Core and only tested on the STMicroelectronics | |
| platforms. | |
| if STMMAC_ETH | |
| config STMMAC_PLATFORM | |
| tristate "STMMAC Platform bus support" | |
| depends on STMMAC_ETH | |
| select MFD_SYSCON | |
| default y | |
| ---help--- | |
| This selects the platform specific bus support for the stmmac driver. | |
| This is the driver used on several SoCs: | |
| STi, Allwinner, Amlogic Meson, Altera SOCFPGA. | |
| If you have a controller with this interface, say Y or M here. | |
| If unsure, say N. | |
| if STMMAC_PLATFORM | |
| config DWMAC_GENERIC | |
| tristate "Generic driver for DWMAC" | |
| default STMMAC_PLATFORM | |
| ---help--- | |
| Generic DWMAC driver for platforms that don't require any | |
| platform specific code to function or is using platform | |
| data for setup. | |
| config DWMAC_IPQ806X | |
| tristate "QCA IPQ806x DWMAC support" | |
| default ARCH_QCOM | |
| depends on OF && (ARCH_QCOM || COMPILE_TEST) | |
| select MFD_SYSCON | |
| help | |
| Support for QCA IPQ806X DWMAC Ethernet. | |
| This selects the IPQ806x SoC glue layer support for the stmmac | |
| device driver. This driver does not use any of the hardware | |
| acceleration features available on this SoC. Network devices | |
| will behave like standard non-accelerated ethernet interfaces. | |
| config DWMAC_LPC18XX | |
| tristate "NXP LPC18xx/43xx DWMAC support" | |
| default ARCH_LPC18XX | |
| depends on OF && (ARCH_LPC18XX || COMPILE_TEST) | |
| select MFD_SYSCON | |
| ---help--- | |
| Support for NXP LPC18xx/43xx DWMAC Ethernet. | |
| config DWMAC_MESON | |
| tristate "Amlogic Meson dwmac support" | |
| default ARCH_MESON | |
| depends on OF && COMMON_CLK && (ARCH_MESON || COMPILE_TEST) | |
| help | |
| Support for Ethernet controller on Amlogic Meson SoCs. | |
| This selects the Amlogic Meson SoC glue layer support for | |
| the stmmac device driver. This driver is used for Meson6, | |
| Meson8, Meson8b and GXBB SoCs. | |
| config DWMAC_ROCKCHIP | |
| tristate "Rockchip dwmac support" | |
| default ARCH_ROCKCHIP | |
| depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST) | |
| select MFD_SYSCON | |
| help | |
| Support for Ethernet controller on Rockchip RK3288 SoC. | |
| This selects the Rockchip RK3288 SoC glue layer support for | |
| the stmmac device driver. | |
| config DWMAC_SOCFPGA | |
| tristate "SOCFPGA dwmac support" | |
| default ARCH_SOCFPGA | |
| depends on OF && (ARCH_SOCFPGA || COMPILE_TEST) | |
| select MFD_SYSCON | |
| help | |
| Support for ethernet controller on Altera SOCFPGA | |
| This selects the Altera SOCFPGA SoC glue layer support | |
| for the stmmac device driver. This driver is used for | |
| arria5 and cyclone5 FPGA SoCs. | |
| config DWMAC_STI | |
| tristate "STi GMAC support" | |
| default ARCH_STI | |
| depends on OF && (ARCH_STI || COMPILE_TEST) | |
| select MFD_SYSCON | |
| ---help--- | |
| Support for ethernet controller on STi SOCs. | |
| This selects STi SoC glue layer support for the stmmac | |
| device driver. This driver is used on for the STi series | |
| SOCs GMAC ethernet controller. | |
| config DWMAC_STM32 | |
| tristate "STM32 DWMAC support" | |
| default ARCH_STM32 | |
| depends on OF && HAS_IOMEM && (ARCH_STM32 || COMPILE_TEST) | |
| select MFD_SYSCON | |
| ---help--- | |
| Support for ethernet controller on STM32 SOCs. | |
| This selects STM32 SoC glue layer support for the stmmac | |
| device driver. This driver is used on for the STM32 series | |
| SOCs GMAC ethernet controller. | |
| config DWMAC_SUNXI | |
| tristate "Allwinner GMAC support" | |
| default ARCH_SUNXI | |
| depends on OF && (ARCH_SUNXI || COMPILE_TEST) | |
| ---help--- | |
| Support for Allwinner A20/A31 GMAC ethernet controllers. | |
| This selects Allwinner SoC glue layer support for the | |
| stmmac device driver. This driver is used for A20/A31 | |
| GMAC ethernet controller. | |
| endif | |
| config STMMAC_PCI | |
| tristate "STMMAC PCI bus support" | |
| depends on STMMAC_ETH && PCI | |
| ---help--- | |
| This is to select the Synopsys DWMAC available on PCI devices, | |
| if you have a controller with this interface, say Y or M here. | |
| This PCI support is tested on XLINX XC2V3000 FF1152AMT0221 | |
| D1215994A VIRTEX FPGA board. | |
| If unsure, say N. | |
| endif |