| /* | |
| * Copyright (c) 2009 Peter Holik | |
| * | |
| * Intellon usb PLC (Powerline Communications) usb net driver | |
| * | |
| * http://www.tandel.be/downloads/INT51X1_Datasheet.pdf | |
| * | |
| * Based on the work of Jan 'RedBully' Seiffert | |
| */ | |
| /* | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or. | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, see <http://www.gnu.org/licenses/>. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/ctype.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/ethtool.h> | |
| #include <linux/slab.h> | |
| #include <linux/mii.h> | |
| #include <linux/usb.h> | |
| #include <linux/usb/usbnet.h> | |
| #define INT51X1_VENDOR_ID 0x09e1 | |
| #define INT51X1_PRODUCT_ID 0x5121 | |
| #define INT51X1_HEADER_SIZE 2 /* 2 byte header */ | |
| #define PACKET_TYPE_PROMISCUOUS (1 << 0) | |
| #define PACKET_TYPE_ALL_MULTICAST (1 << 1) /* no filter */ | |
| #define PACKET_TYPE_DIRECTED (1 << 2) | |
| #define PACKET_TYPE_BROADCAST (1 << 3) | |
| #define PACKET_TYPE_MULTICAST (1 << 4) /* filtered */ | |
| #define SET_ETHERNET_PACKET_FILTER 0x43 | |
| static int int51x1_rx_fixup(struct usbnet *dev, struct sk_buff *skb) | |
| { | |
| int len; | |
| if (!(pskb_may_pull(skb, INT51X1_HEADER_SIZE))) { | |
| netdev_err(dev->net, "unexpected tiny rx frame\n"); | |
| return 0; | |
| } | |
| len = le16_to_cpu(*(__le16 *)&skb->data[skb->len - 2]); | |
| skb_trim(skb, len); | |
| return 1; | |
| } | |
| static struct sk_buff *int51x1_tx_fixup(struct usbnet *dev, | |
| struct sk_buff *skb, gfp_t flags) | |
| { | |
| int pack_len = skb->len; | |
| int pack_with_header_len = pack_len + INT51X1_HEADER_SIZE; | |
| int headroom = skb_headroom(skb); | |
| int tailroom = skb_tailroom(skb); | |
| int need_tail = 0; | |
| __le16 *len; | |
| /* if packet and our header is smaler than 64 pad to 64 (+ ZLP) */ | |
| if ((pack_with_header_len) < dev->maxpacket) | |
| need_tail = dev->maxpacket - pack_with_header_len + 1; | |
| /* | |
| * usbnet would send a ZLP if packetlength mod urbsize == 0 for us, | |
| * but we need to know ourself, because this would add to the length | |
| * we send down to the device... | |
| */ | |
| else if (!(pack_with_header_len % dev->maxpacket)) | |
| need_tail = 1; | |
| if (!skb_cloned(skb) && | |
| (headroom + tailroom >= need_tail + INT51X1_HEADER_SIZE)) { | |
| if (headroom < INT51X1_HEADER_SIZE || tailroom < need_tail) { | |
| skb->data = memmove(skb->head + INT51X1_HEADER_SIZE, | |
| skb->data, skb->len); | |
| skb_set_tail_pointer(skb, skb->len); | |
| } | |
| } else { | |
| struct sk_buff *skb2; | |
| skb2 = skb_copy_expand(skb, | |
| INT51X1_HEADER_SIZE, | |
| need_tail, | |
| flags); | |
| dev_kfree_skb_any(skb); | |
| if (!skb2) | |
| return NULL; | |
| skb = skb2; | |
| } | |
| pack_len += need_tail; | |
| pack_len &= 0x07ff; | |
| len = (__le16 *) __skb_push(skb, INT51X1_HEADER_SIZE); | |
| *len = cpu_to_le16(pack_len); | |
| if(need_tail) | |
| memset(__skb_put(skb, need_tail), 0, need_tail); | |
| return skb; | |
| } | |
| static void int51x1_set_multicast(struct net_device *netdev) | |
| { | |
| struct usbnet *dev = netdev_priv(netdev); | |
| u16 filter = PACKET_TYPE_DIRECTED | PACKET_TYPE_BROADCAST; | |
| if (netdev->flags & IFF_PROMISC) { | |
| /* do not expect to see traffic of other PLCs */ | |
| filter |= PACKET_TYPE_PROMISCUOUS; | |
| netdev_info(dev->net, "promiscuous mode enabled\n"); | |
| } else if (!netdev_mc_empty(netdev) || | |
| (netdev->flags & IFF_ALLMULTI)) { | |
| filter |= PACKET_TYPE_ALL_MULTICAST; | |
| netdev_dbg(dev->net, "receive all multicast enabled\n"); | |
| } else { | |
| /* ~PROMISCUOUS, ~MULTICAST */ | |
| netdev_dbg(dev->net, "receive own packets only\n"); | |
| } | |
| usbnet_write_cmd_async(dev, SET_ETHERNET_PACKET_FILTER, | |
| USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, | |
| filter, 0, NULL, 0); | |
| } | |
| static const struct net_device_ops int51x1_netdev_ops = { | |
| .ndo_open = usbnet_open, | |
| .ndo_stop = usbnet_stop, | |
| .ndo_start_xmit = usbnet_start_xmit, | |
| .ndo_tx_timeout = usbnet_tx_timeout, | |
| .ndo_change_mtu = usbnet_change_mtu, | |
| .ndo_set_mac_address = eth_mac_addr, | |
| .ndo_validate_addr = eth_validate_addr, | |
| .ndo_set_rx_mode = int51x1_set_multicast, | |
| }; | |
| static int int51x1_bind(struct usbnet *dev, struct usb_interface *intf) | |
| { | |
| int status = usbnet_get_ethernet_addr(dev, 3); | |
| if (status) | |
| return status; | |
| dev->net->hard_header_len += INT51X1_HEADER_SIZE; | |
| dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len; | |
| dev->net->netdev_ops = &int51x1_netdev_ops; | |
| return usbnet_get_endpoints(dev, intf); | |
| } | |
| static const struct driver_info int51x1_info = { | |
| .description = "Intellon usb powerline adapter", | |
| .bind = int51x1_bind, | |
| .rx_fixup = int51x1_rx_fixup, | |
| .tx_fixup = int51x1_tx_fixup, | |
| .in = 1, | |
| .out = 2, | |
| .flags = FLAG_ETHER, | |
| }; | |
| static const struct usb_device_id products[] = { | |
| { | |
| USB_DEVICE(INT51X1_VENDOR_ID, INT51X1_PRODUCT_ID), | |
| .driver_info = (unsigned long) &int51x1_info, | |
| }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(usb, products); | |
| static struct usb_driver int51x1_driver = { | |
| .name = "int51x1", | |
| .id_table = products, | |
| .probe = usbnet_probe, | |
| .disconnect = usbnet_disconnect, | |
| .suspend = usbnet_suspend, | |
| .resume = usbnet_resume, | |
| .disable_hub_initiated_lpm = 1, | |
| }; | |
| module_usb_driver(int51x1_driver); | |
| MODULE_AUTHOR("Peter Holik"); | |
| MODULE_DESCRIPTION("Intellon usb powerline adapter"); | |
| MODULE_LICENSE("GPL"); |