| /* | |
| * CoreChip-sz SR9700 one chip USB 1.1 Ethernet Devices | |
| * | |
| * Author : Liu Junliang <liujunliang_ljl@163.com> | |
| * | |
| * Based on dm9601.c | |
| * | |
| * This file is licensed under the terms of the GNU General Public License | |
| * version 2. This program is licensed "as is" without any warranty of any | |
| * kind, whether express or implied. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/sched.h> | |
| #include <linux/stddef.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/ethtool.h> | |
| #include <linux/mii.h> | |
| #include <linux/usb.h> | |
| #include <linux/crc32.h> | |
| #include <linux/usb/usbnet.h> | |
| #include "sr9700.h" | |
| static int sr_read(struct usbnet *dev, u8 reg, u16 length, void *data) | |
| { | |
| int err; | |
| err = usbnet_read_cmd(dev, SR_RD_REGS, SR_REQ_RD_REG, 0, reg, data, | |
| length); | |
| if ((err != length) && (err >= 0)) | |
| err = -EINVAL; | |
| return err; | |
| } | |
| static int sr_write(struct usbnet *dev, u8 reg, u16 length, void *data) | |
| { | |
| int err; | |
| err = usbnet_write_cmd(dev, SR_WR_REGS, SR_REQ_WR_REG, 0, reg, data, | |
| length); | |
| if ((err >= 0) && (err < length)) | |
| err = -EINVAL; | |
| return err; | |
| } | |
| static int sr_read_reg(struct usbnet *dev, u8 reg, u8 *value) | |
| { | |
| return sr_read(dev, reg, 1, value); | |
| } | |
| static int sr_write_reg(struct usbnet *dev, u8 reg, u8 value) | |
| { | |
| return usbnet_write_cmd(dev, SR_WR_REGS, SR_REQ_WR_REG, | |
| value, reg, NULL, 0); | |
| } | |
| static void sr_write_async(struct usbnet *dev, u8 reg, u16 length, void *data) | |
| { | |
| usbnet_write_cmd_async(dev, SR_WR_REGS, SR_REQ_WR_REG, | |
| 0, reg, data, length); | |
| } | |
| static void sr_write_reg_async(struct usbnet *dev, u8 reg, u8 value) | |
| { | |
| usbnet_write_cmd_async(dev, SR_WR_REGS, SR_REQ_WR_REG, | |
| value, reg, NULL, 0); | |
| } | |
| static int wait_phy_eeprom_ready(struct usbnet *dev, int phy) | |
| { | |
| int i; | |
| for (i = 0; i < SR_SHARE_TIMEOUT; i++) { | |
| u8 tmp = 0; | |
| int ret; | |
| udelay(1); | |
| ret = sr_read_reg(dev, SR_EPCR, &tmp); | |
| if (ret < 0) | |
| return ret; | |
| /* ready */ | |
| if (!(tmp & EPCR_ERRE)) | |
| return 0; | |
| } | |
| netdev_err(dev->net, "%s write timed out!\n", phy ? "phy" : "eeprom"); | |
| return -EIO; | |
| } | |
| static int sr_share_read_word(struct usbnet *dev, int phy, u8 reg, | |
| __le16 *value) | |
| { | |
| int ret; | |
| mutex_lock(&dev->phy_mutex); | |
| sr_write_reg(dev, SR_EPAR, phy ? (reg | EPAR_PHY_ADR) : reg); | |
| sr_write_reg(dev, SR_EPCR, phy ? (EPCR_EPOS | EPCR_ERPRR) : EPCR_ERPRR); | |
| ret = wait_phy_eeprom_ready(dev, phy); | |
| if (ret < 0) | |
| goto out_unlock; | |
| sr_write_reg(dev, SR_EPCR, 0x0); | |
| ret = sr_read(dev, SR_EPDR, 2, value); | |
| netdev_dbg(dev->net, "read shared %d 0x%02x returned 0x%04x, %d\n", | |
| phy, reg, *value, ret); | |
| out_unlock: | |
| mutex_unlock(&dev->phy_mutex); | |
| return ret; | |
| } | |
| static int sr_share_write_word(struct usbnet *dev, int phy, u8 reg, | |
| __le16 value) | |
| { | |
| int ret; | |
| mutex_lock(&dev->phy_mutex); | |
| ret = sr_write(dev, SR_EPDR, 2, &value); | |
| if (ret < 0) | |
| goto out_unlock; | |
| sr_write_reg(dev, SR_EPAR, phy ? (reg | EPAR_PHY_ADR) : reg); | |
| sr_write_reg(dev, SR_EPCR, phy ? (EPCR_WEP | EPCR_EPOS | EPCR_ERPRW) : | |
| (EPCR_WEP | EPCR_ERPRW)); | |
| ret = wait_phy_eeprom_ready(dev, phy); | |
| if (ret < 0) | |
| goto out_unlock; | |
| sr_write_reg(dev, SR_EPCR, 0x0); | |
| out_unlock: | |
| mutex_unlock(&dev->phy_mutex); | |
| return ret; | |
| } | |
| static int sr_read_eeprom_word(struct usbnet *dev, u8 offset, void *value) | |
| { | |
| return sr_share_read_word(dev, 0, offset, value); | |
| } | |
| static int sr9700_get_eeprom_len(struct net_device *netdev) | |
| { | |
| return SR_EEPROM_LEN; | |
| } | |
| static int sr9700_get_eeprom(struct net_device *netdev, | |
| struct ethtool_eeprom *eeprom, u8 *data) | |
| { | |
| struct usbnet *dev = netdev_priv(netdev); | |
| __le16 *buf = (__le16 *)data; | |
| int ret = 0; | |
| int i; | |
| /* access is 16bit */ | |
| if ((eeprom->offset & 0x01) || (eeprom->len & 0x01)) | |
| return -EINVAL; | |
| for (i = 0; i < eeprom->len / 2; i++) { | |
| ret = sr_read_eeprom_word(dev, eeprom->offset / 2 + i, buf + i); | |
| if (ret < 0) | |
| break; | |
| } | |
| return ret; | |
| } | |
| static int sr_mdio_read(struct net_device *netdev, int phy_id, int loc) | |
| { | |
| struct usbnet *dev = netdev_priv(netdev); | |
| __le16 res; | |
| int rc = 0; | |
| if (phy_id) { | |
| netdev_dbg(netdev, "Only internal phy supported\n"); | |
| return 0; | |
| } | |
| /* Access NSR_LINKST bit for link status instead of MII_BMSR */ | |
| if (loc == MII_BMSR) { | |
| u8 value; | |
| sr_read_reg(dev, SR_NSR, &value); | |
| if (value & NSR_LINKST) | |
| rc = 1; | |
| } | |
| sr_share_read_word(dev, 1, loc, &res); | |
| if (rc == 1) | |
| res = le16_to_cpu(res) | BMSR_LSTATUS; | |
| else | |
| res = le16_to_cpu(res) & ~BMSR_LSTATUS; | |
| netdev_dbg(netdev, "sr_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n", | |
| phy_id, loc, res); | |
| return res; | |
| } | |
| static void sr_mdio_write(struct net_device *netdev, int phy_id, int loc, | |
| int val) | |
| { | |
| struct usbnet *dev = netdev_priv(netdev); | |
| __le16 res = cpu_to_le16(val); | |
| if (phy_id) { | |
| netdev_dbg(netdev, "Only internal phy supported\n"); | |
| return; | |
| } | |
| netdev_dbg(netdev, "sr_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n", | |
| phy_id, loc, val); | |
| sr_share_write_word(dev, 1, loc, res); | |
| } | |
| static u32 sr9700_get_link(struct net_device *netdev) | |
| { | |
| struct usbnet *dev = netdev_priv(netdev); | |
| u8 value = 0; | |
| int rc = 0; | |
| /* Get the Link Status directly */ | |
| sr_read_reg(dev, SR_NSR, &value); | |
| if (value & NSR_LINKST) | |
| rc = 1; | |
| return rc; | |
| } | |
| static int sr9700_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd) | |
| { | |
| struct usbnet *dev = netdev_priv(netdev); | |
| return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); | |
| } | |
| static const struct ethtool_ops sr9700_ethtool_ops = { | |
| .get_drvinfo = usbnet_get_drvinfo, | |
| .get_link = sr9700_get_link, | |
| .get_msglevel = usbnet_get_msglevel, | |
| .set_msglevel = usbnet_set_msglevel, | |
| .get_eeprom_len = sr9700_get_eeprom_len, | |
| .get_eeprom = sr9700_get_eeprom, | |
| .get_settings = usbnet_get_settings, | |
| .set_settings = usbnet_set_settings, | |
| .nway_reset = usbnet_nway_reset, | |
| }; | |
| static void sr9700_set_multicast(struct net_device *netdev) | |
| { | |
| struct usbnet *dev = netdev_priv(netdev); | |
| /* We use the 20 byte dev->data for our 8 byte filter buffer | |
| * to avoid allocating memory that is tricky to free later | |
| */ | |
| u8 *hashes = (u8 *)&dev->data; | |
| /* rx_ctl setting : enable, disable_long, disable_crc */ | |
| u8 rx_ctl = RCR_RXEN | RCR_DIS_CRC | RCR_DIS_LONG; | |
| memset(hashes, 0x00, SR_MCAST_SIZE); | |
| /* broadcast address */ | |
| hashes[SR_MCAST_SIZE - 1] |= SR_MCAST_ADDR_FLAG; | |
| if (netdev->flags & IFF_PROMISC) { | |
| rx_ctl |= RCR_PRMSC; | |
| } else if (netdev->flags & IFF_ALLMULTI || | |
| netdev_mc_count(netdev) > SR_MCAST_MAX) { | |
| rx_ctl |= RCR_RUNT; | |
| } else if (!netdev_mc_empty(netdev)) { | |
| struct netdev_hw_addr *ha; | |
| netdev_for_each_mc_addr(ha, netdev) { | |
| u32 crc = ether_crc(ETH_ALEN, ha->addr) >> 26; | |
| hashes[crc >> 3] |= 1 << (crc & 0x7); | |
| } | |
| } | |
| sr_write_async(dev, SR_MAR, SR_MCAST_SIZE, hashes); | |
| sr_write_reg_async(dev, SR_RCR, rx_ctl); | |
| } | |
| static int sr9700_set_mac_address(struct net_device *netdev, void *p) | |
| { | |
| struct usbnet *dev = netdev_priv(netdev); | |
| struct sockaddr *addr = p; | |
| if (!is_valid_ether_addr(addr->sa_data)) { | |
| netdev_err(netdev, "not setting invalid mac address %pM\n", | |
| addr->sa_data); | |
| return -EINVAL; | |
| } | |
| memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); | |
| sr_write_async(dev, SR_PAR, 6, netdev->dev_addr); | |
| return 0; | |
| } | |
| static const struct net_device_ops sr9700_netdev_ops = { | |
| .ndo_open = usbnet_open, | |
| .ndo_stop = usbnet_stop, | |
| .ndo_start_xmit = usbnet_start_xmit, | |
| .ndo_tx_timeout = usbnet_tx_timeout, | |
| .ndo_change_mtu = usbnet_change_mtu, | |
| .ndo_validate_addr = eth_validate_addr, | |
| .ndo_do_ioctl = sr9700_ioctl, | |
| .ndo_set_rx_mode = sr9700_set_multicast, | |
| .ndo_set_mac_address = sr9700_set_mac_address, | |
| }; | |
| static int sr9700_bind(struct usbnet *dev, struct usb_interface *intf) | |
| { | |
| struct net_device *netdev; | |
| struct mii_if_info *mii; | |
| int ret; | |
| ret = usbnet_get_endpoints(dev, intf); | |
| if (ret) | |
| goto out; | |
| netdev = dev->net; | |
| netdev->netdev_ops = &sr9700_netdev_ops; | |
| netdev->ethtool_ops = &sr9700_ethtool_ops; | |
| netdev->hard_header_len += SR_TX_OVERHEAD; | |
| dev->hard_mtu = netdev->mtu + netdev->hard_header_len; | |
| /* bulkin buffer is preferably not less than 3K */ | |
| dev->rx_urb_size = 3072; | |
| mii = &dev->mii; | |
| mii->dev = netdev; | |
| mii->mdio_read = sr_mdio_read; | |
| mii->mdio_write = sr_mdio_write; | |
| mii->phy_id_mask = 0x1f; | |
| mii->reg_num_mask = 0x1f; | |
| sr_write_reg(dev, SR_NCR, NCR_RST); | |
| udelay(20); | |
| /* read MAC | |
| * After Chip Power on, the Chip will reload the MAC from | |
| * EEPROM automatically to PAR. In case there is no EEPROM externally, | |
| * a default MAC address is stored in PAR for making chip work properly. | |
| */ | |
| if (sr_read(dev, SR_PAR, ETH_ALEN, netdev->dev_addr) < 0) { | |
| netdev_err(netdev, "Error reading MAC address\n"); | |
| ret = -ENODEV; | |
| goto out; | |
| } | |
| /* power up and reset phy */ | |
| sr_write_reg(dev, SR_PRR, PRR_PHY_RST); | |
| /* at least 10ms, here 20ms for safe */ | |
| mdelay(20); | |
| sr_write_reg(dev, SR_PRR, 0); | |
| /* at least 1ms, here 2ms for reading right register */ | |
| udelay(2 * 1000); | |
| /* receive broadcast packets */ | |
| sr9700_set_multicast(netdev); | |
| sr_mdio_write(netdev, mii->phy_id, MII_BMCR, BMCR_RESET); | |
| sr_mdio_write(netdev, mii->phy_id, MII_ADVERTISE, ADVERTISE_ALL | | |
| ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP); | |
| mii_nway_restart(mii); | |
| out: | |
| return ret; | |
| } | |
| static int sr9700_rx_fixup(struct usbnet *dev, struct sk_buff *skb) | |
| { | |
| struct sk_buff *sr_skb; | |
| int len; | |
| /* skb content (packets) format : | |
| * p0 p1 p2 ...... pm | |
| * / \ | |
| * / \ | |
| * / \ | |
| * / \ | |
| * p0b0 p0b1 p0b2 p0b3 ...... p0b(n-4) p0b(n-3)...p0bn | |
| * | |
| * p0 : packet 0 | |
| * p0b0 : packet 0 byte 0 | |
| * | |
| * b0: rx status | |
| * b1: packet length (incl crc) low | |
| * b2: packet length (incl crc) high | |
| * b3..n-4: packet data | |
| * bn-3..bn: ethernet packet crc | |
| */ | |
| if (unlikely(skb->len < SR_RX_OVERHEAD)) { | |
| netdev_err(dev->net, "unexpected tiny rx frame\n"); | |
| return 0; | |
| } | |
| /* one skb may contains multiple packets */ | |
| while (skb->len > SR_RX_OVERHEAD) { | |
| if (skb->data[0] != 0x40) | |
| return 0; | |
| /* ignore the CRC length */ | |
| len = (skb->data[1] | (skb->data[2] << 8)) - 4; | |
| if (len > ETH_FRAME_LEN) | |
| return 0; | |
| /* the last packet of current skb */ | |
| if (skb->len == (len + SR_RX_OVERHEAD)) { | |
| skb_pull(skb, 3); | |
| skb->len = len; | |
| skb_set_tail_pointer(skb, len); | |
| skb->truesize = len + sizeof(struct sk_buff); | |
| return 2; | |
| } | |
| /* skb_clone is used for address align */ | |
| sr_skb = skb_clone(skb, GFP_ATOMIC); | |
| if (!sr_skb) | |
| return 0; | |
| sr_skb->len = len; | |
| sr_skb->data = skb->data + 3; | |
| skb_set_tail_pointer(sr_skb, len); | |
| sr_skb->truesize = len + sizeof(struct sk_buff); | |
| usbnet_skb_return(dev, sr_skb); | |
| skb_pull(skb, len + SR_RX_OVERHEAD); | |
| }; | |
| return 0; | |
| } | |
| static struct sk_buff *sr9700_tx_fixup(struct usbnet *dev, struct sk_buff *skb, | |
| gfp_t flags) | |
| { | |
| int len; | |
| /* SR9700 can only send out one ethernet packet at once. | |
| * | |
| * b0 b1 b2 b3 ...... b(n-4) b(n-3)...bn | |
| * | |
| * b0: rx status | |
| * b1: packet length (incl crc) low | |
| * b2: packet length (incl crc) high | |
| * b3..n-4: packet data | |
| * bn-3..bn: ethernet packet crc | |
| */ | |
| len = skb->len; | |
| if (skb_headroom(skb) < SR_TX_OVERHEAD) { | |
| struct sk_buff *skb2; | |
| skb2 = skb_copy_expand(skb, SR_TX_OVERHEAD, 0, flags); | |
| dev_kfree_skb_any(skb); | |
| skb = skb2; | |
| if (!skb) | |
| return NULL; | |
| } | |
| __skb_push(skb, SR_TX_OVERHEAD); | |
| /* usbnet adds padding if length is a multiple of packet size | |
| * if so, adjust length value in header | |
| */ | |
| if ((skb->len % dev->maxpacket) == 0) | |
| len++; | |
| skb->data[0] = len; | |
| skb->data[1] = len >> 8; | |
| return skb; | |
| } | |
| static void sr9700_status(struct usbnet *dev, struct urb *urb) | |
| { | |
| int link; | |
| u8 *buf; | |
| /* format: | |
| b0: net status | |
| b1: tx status 1 | |
| b2: tx status 2 | |
| b3: rx status | |
| b4: rx overflow | |
| b5: rx count | |
| b6: tx count | |
| b7: gpr | |
| */ | |
| if (urb->actual_length < 8) | |
| return; | |
| buf = urb->transfer_buffer; | |
| link = !!(buf[0] & 0x40); | |
| if (netif_carrier_ok(dev->net) != link) { | |
| usbnet_link_change(dev, link, 1); | |
| netdev_dbg(dev->net, "Link Status is: %d\n", link); | |
| } | |
| } | |
| static int sr9700_link_reset(struct usbnet *dev) | |
| { | |
| struct ethtool_cmd ecmd; | |
| mii_check_media(&dev->mii, 1, 1); | |
| mii_ethtool_gset(&dev->mii, &ecmd); | |
| netdev_dbg(dev->net, "link_reset() speed: %d duplex: %d\n", | |
| ecmd.speed, ecmd.duplex); | |
| return 0; | |
| } | |
| static const struct driver_info sr9700_driver_info = { | |
| .description = "CoreChip SR9700 USB Ethernet", | |
| .flags = FLAG_ETHER, | |
| .bind = sr9700_bind, | |
| .rx_fixup = sr9700_rx_fixup, | |
| .tx_fixup = sr9700_tx_fixup, | |
| .status = sr9700_status, | |
| .link_reset = sr9700_link_reset, | |
| .reset = sr9700_link_reset, | |
| }; | |
| static const struct usb_device_id products[] = { | |
| { | |
| USB_DEVICE(0x0fe6, 0x9700), /* SR9700 device */ | |
| .driver_info = (unsigned long)&sr9700_driver_info, | |
| }, | |
| {}, /* END */ | |
| }; | |
| MODULE_DEVICE_TABLE(usb, products); | |
| static struct usb_driver sr9700_usb_driver = { | |
| .name = "sr9700", | |
| .id_table = products, | |
| .probe = usbnet_probe, | |
| .disconnect = usbnet_disconnect, | |
| .suspend = usbnet_suspend, | |
| .resume = usbnet_resume, | |
| .disable_hub_initiated_lpm = 1, | |
| }; | |
| module_usb_driver(sr9700_usb_driver); | |
| MODULE_AUTHOR("liujl <liujunliang_ljl@163.com>"); | |
| MODULE_DESCRIPTION("SR9700 one chip USB 1.1 USB to Ethernet device from http://www.corechip-sz.com/"); | |
| MODULE_LICENSE("GPL"); |