| /* | |
| * Generic HDLC support routines for Linux | |
| * HDLC Ethernet emulation support | |
| * | |
| * Copyright (C) 2002-2006 Krzysztof Halasa <khc@pm.waw.pl> | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of version 2 of the GNU General Public License | |
| * as published by the Free Software Foundation. | |
| */ | |
| #include <linux/errno.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/gfp.h> | |
| #include <linux/hdlc.h> | |
| #include <linux/if_arp.h> | |
| #include <linux/inetdevice.h> | |
| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/pkt_sched.h> | |
| #include <linux/poll.h> | |
| #include <linux/rtnetlink.h> | |
| #include <linux/skbuff.h> | |
| static int raw_eth_ioctl(struct net_device *dev, struct ifreq *ifr); | |
| static netdev_tx_t eth_tx(struct sk_buff *skb, struct net_device *dev) | |
| { | |
| int pad = ETH_ZLEN - skb->len; | |
| if (pad > 0) { /* Pad the frame with zeros */ | |
| int len = skb->len; | |
| if (skb_tailroom(skb) < pad) | |
| if (pskb_expand_head(skb, 0, pad, GFP_ATOMIC)) { | |
| dev->stats.tx_dropped++; | |
| dev_kfree_skb(skb); | |
| return 0; | |
| } | |
| skb_put(skb, pad); | |
| memset(skb->data + len, 0, pad); | |
| } | |
| return dev_to_hdlc(dev)->xmit(skb, dev); | |
| } | |
| static struct hdlc_proto proto = { | |
| .type_trans = eth_type_trans, | |
| .xmit = eth_tx, | |
| .ioctl = raw_eth_ioctl, | |
| .module = THIS_MODULE, | |
| }; | |
| static int raw_eth_ioctl(struct net_device *dev, struct ifreq *ifr) | |
| { | |
| raw_hdlc_proto __user *raw_s = ifr->ifr_settings.ifs_ifsu.raw_hdlc; | |
| const size_t size = sizeof(raw_hdlc_proto); | |
| raw_hdlc_proto new_settings; | |
| hdlc_device *hdlc = dev_to_hdlc(dev); | |
| int result, old_qlen; | |
| switch (ifr->ifr_settings.type) { | |
| case IF_GET_PROTO: | |
| if (dev_to_hdlc(dev)->proto != &proto) | |
| return -EINVAL; | |
| ifr->ifr_settings.type = IF_PROTO_HDLC_ETH; | |
| if (ifr->ifr_settings.size < size) { | |
| ifr->ifr_settings.size = size; /* data size wanted */ | |
| return -ENOBUFS; | |
| } | |
| if (copy_to_user(raw_s, hdlc->state, size)) | |
| return -EFAULT; | |
| return 0; | |
| case IF_PROTO_HDLC_ETH: | |
| if (!capable(CAP_NET_ADMIN)) | |
| return -EPERM; | |
| if (dev->flags & IFF_UP) | |
| return -EBUSY; | |
| if (copy_from_user(&new_settings, raw_s, size)) | |
| return -EFAULT; | |
| if (new_settings.encoding == ENCODING_DEFAULT) | |
| new_settings.encoding = ENCODING_NRZ; | |
| if (new_settings.parity == PARITY_DEFAULT) | |
| new_settings.parity = PARITY_CRC16_PR1_CCITT; | |
| result = hdlc->attach(dev, new_settings.encoding, | |
| new_settings.parity); | |
| if (result) | |
| return result; | |
| result = attach_hdlc_protocol(dev, &proto, | |
| sizeof(raw_hdlc_proto)); | |
| if (result) | |
| return result; | |
| memcpy(hdlc->state, &new_settings, size); | |
| old_qlen = dev->tx_queue_len; | |
| ether_setup(dev); | |
| dev->tx_queue_len = old_qlen; | |
| eth_hw_addr_random(dev); | |
| call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE, dev); | |
| netif_dormant_off(dev); | |
| return 0; | |
| } | |
| return -EINVAL; | |
| } | |
| static int __init mod_init(void) | |
| { | |
| register_hdlc_protocol(&proto); | |
| return 0; | |
| } | |
| static void __exit mod_exit(void) | |
| { | |
| unregister_hdlc_protocol(&proto); | |
| } | |
| module_init(mod_init); | |
| module_exit(mod_exit); | |
| MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>"); | |
| MODULE_DESCRIPTION("Ethernet encapsulation support for generic HDLC"); | |
| MODULE_LICENSE("GPL v2"); |