| /* | |
| * Atheros CARL9170 driver | |
| * | |
| * 802.11 xmit & status routines | |
| * | |
| * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> | |
| * Copyright 2009, 2010, Christian Lamparter <chunkeey@googlemail.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; see the file COPYING. If not, see | |
| * http://www.gnu.org/licenses/. | |
| * | |
| * This file incorporates work covered by the following copyright and | |
| * permission notice: | |
| * Copyright (c) 2007-2008 Atheros Communications, Inc. | |
| * | |
| * Permission to use, copy, modify, and/or distribute this software for any | |
| * purpose with or without fee is hereby granted, provided that the above | |
| * copyright notice and this permission notice appear in all copies. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES | |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF | |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR | |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES | |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN | |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF | |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | |
| */ | |
| #include <linux/slab.h> | |
| #include <linux/module.h> | |
| #include <linux/etherdevice.h> | |
| #include <net/mac80211.h> | |
| #include "carl9170.h" | |
| #include "hw.h" | |
| #include "cmd.h" | |
| static inline unsigned int __carl9170_get_queue(struct ar9170 *ar, | |
| unsigned int queue) | |
| { | |
| if (unlikely(modparam_noht)) { | |
| return queue; | |
| } else { | |
| /* | |
| * This is just another workaround, until | |
| * someone figures out how to get QoS and | |
| * AMPDU to play nicely together. | |
| */ | |
| return 2; /* AC_BE */ | |
| } | |
| } | |
| static inline unsigned int carl9170_get_queue(struct ar9170 *ar, | |
| struct sk_buff *skb) | |
| { | |
| return __carl9170_get_queue(ar, skb_get_queue_mapping(skb)); | |
| } | |
| static bool is_mem_full(struct ar9170 *ar) | |
| { | |
| return (DIV_ROUND_UP(IEEE80211_MAX_FRAME_LEN, ar->fw.mem_block_size) > | |
| atomic_read(&ar->mem_free_blocks)); | |
| } | |
| static void carl9170_tx_accounting(struct ar9170 *ar, struct sk_buff *skb) | |
| { | |
| int queue, i; | |
| bool mem_full; | |
| atomic_inc(&ar->tx_total_queued); | |
| queue = skb_get_queue_mapping(skb); | |
| spin_lock_bh(&ar->tx_stats_lock); | |
| /* | |
| * The driver has to accept the frame, regardless if the queue is | |
| * full to the brim, or not. We have to do the queuing internally, | |
| * since mac80211 assumes that a driver which can operate with | |
| * aggregated frames does not reject frames for this reason. | |
| */ | |
| ar->tx_stats[queue].len++; | |
| ar->tx_stats[queue].count++; | |
| mem_full = is_mem_full(ar); | |
| for (i = 0; i < ar->hw->queues; i++) { | |
| if (mem_full || ar->tx_stats[i].len >= ar->tx_stats[i].limit) { | |
| ieee80211_stop_queue(ar->hw, i); | |
| ar->queue_stop_timeout[i] = jiffies; | |
| } | |
| } | |
| spin_unlock_bh(&ar->tx_stats_lock); | |
| } | |
| /* needs rcu_read_lock */ | |
| static struct ieee80211_sta *__carl9170_get_tx_sta(struct ar9170 *ar, | |
| struct sk_buff *skb) | |
| { | |
| struct _carl9170_tx_superframe *super = (void *) skb->data; | |
| struct ieee80211_hdr *hdr = (void *) super->frame_data; | |
| struct ieee80211_vif *vif; | |
| unsigned int vif_id; | |
| vif_id = (super->s.misc & CARL9170_TX_SUPER_MISC_VIF_ID) >> | |
| CARL9170_TX_SUPER_MISC_VIF_ID_S; | |
| if (WARN_ON_ONCE(vif_id >= AR9170_MAX_VIRTUAL_MAC)) | |
| return NULL; | |
| vif = rcu_dereference(ar->vif_priv[vif_id].vif); | |
| if (unlikely(!vif)) | |
| return NULL; | |
| /* | |
| * Normally we should use wrappers like ieee80211_get_DA to get | |
| * the correct peer ieee80211_sta. | |
| * | |
| * But there is a problem with indirect traffic (broadcasts, or | |
| * data which is designated for other stations) in station mode. | |
| * The frame will be directed to the AP for distribution and not | |
| * to the actual destination. | |
| */ | |
| return ieee80211_find_sta(vif, hdr->addr1); | |
| } | |
| static void carl9170_tx_ps_unblock(struct ar9170 *ar, struct sk_buff *skb) | |
| { | |
| struct ieee80211_sta *sta; | |
| struct carl9170_sta_info *sta_info; | |
| rcu_read_lock(); | |
| sta = __carl9170_get_tx_sta(ar, skb); | |
| if (unlikely(!sta)) | |
| goto out_rcu; | |
| sta_info = (struct carl9170_sta_info *) sta->drv_priv; | |
| if (atomic_dec_return(&sta_info->pending_frames) == 0) | |
| ieee80211_sta_block_awake(ar->hw, sta, false); | |
| out_rcu: | |
| rcu_read_unlock(); | |
| } | |
| static void carl9170_tx_accounting_free(struct ar9170 *ar, struct sk_buff *skb) | |
| { | |
| int queue; | |
| queue = skb_get_queue_mapping(skb); | |
| spin_lock_bh(&ar->tx_stats_lock); | |
| ar->tx_stats[queue].len--; | |
| if (!is_mem_full(ar)) { | |
| unsigned int i; | |
| for (i = 0; i < ar->hw->queues; i++) { | |
| if (ar->tx_stats[i].len >= CARL9170_NUM_TX_LIMIT_SOFT) | |
| continue; | |
| if (ieee80211_queue_stopped(ar->hw, i)) { | |
| unsigned long tmp; | |
| tmp = jiffies - ar->queue_stop_timeout[i]; | |
| if (tmp > ar->max_queue_stop_timeout[i]) | |
| ar->max_queue_stop_timeout[i] = tmp; | |
| } | |
| ieee80211_wake_queue(ar->hw, i); | |
| } | |
| } | |
| spin_unlock_bh(&ar->tx_stats_lock); | |
| if (atomic_dec_and_test(&ar->tx_total_queued)) | |
| complete(&ar->tx_flush); | |
| } | |
| static int carl9170_alloc_dev_space(struct ar9170 *ar, struct sk_buff *skb) | |
| { | |
| struct _carl9170_tx_superframe *super = (void *) skb->data; | |
| unsigned int chunks; | |
| int cookie = -1; | |
| atomic_inc(&ar->mem_allocs); | |
| chunks = DIV_ROUND_UP(skb->len, ar->fw.mem_block_size); | |
| if (unlikely(atomic_sub_return(chunks, &ar->mem_free_blocks) < 0)) { | |
| atomic_add(chunks, &ar->mem_free_blocks); | |
| return -ENOSPC; | |
| } | |
| spin_lock_bh(&ar->mem_lock); | |
| cookie = bitmap_find_free_region(ar->mem_bitmap, ar->fw.mem_blocks, 0); | |
| spin_unlock_bh(&ar->mem_lock); | |
| if (unlikely(cookie < 0)) { | |
| atomic_add(chunks, &ar->mem_free_blocks); | |
| return -ENOSPC; | |
| } | |
| super = (void *) skb->data; | |
| /* | |
| * Cookie #0 serves two special purposes: | |
| * 1. The firmware might use it generate BlockACK frames | |
| * in responds of an incoming BlockAckReqs. | |
| * | |
| * 2. Prevent double-free bugs. | |
| */ | |
| super->s.cookie = (u8) cookie + 1; | |
| return 0; | |
| } | |
| static void carl9170_release_dev_space(struct ar9170 *ar, struct sk_buff *skb) | |
| { | |
| struct _carl9170_tx_superframe *super = (void *) skb->data; | |
| int cookie; | |
| /* make a local copy of the cookie */ | |
| cookie = super->s.cookie; | |
| /* invalidate cookie */ | |
| super->s.cookie = 0; | |
| /* | |
| * Do a out-of-bounds check on the cookie: | |
| * | |
| * * cookie "0" is reserved and won't be assigned to any | |
| * out-going frame. Internally however, it is used to | |
| * mark no longer/un-accounted frames and serves as a | |
| * cheap way of preventing frames from being freed | |
| * twice by _accident_. NB: There is a tiny race... | |
| * | |
| * * obviously, cookie number is limited by the amount | |
| * of available memory blocks, so the number can | |
| * never execeed the mem_blocks count. | |
| */ | |
| if (unlikely(WARN_ON_ONCE(cookie == 0) || | |
| WARN_ON_ONCE(cookie > ar->fw.mem_blocks))) | |
| return; | |
| atomic_add(DIV_ROUND_UP(skb->len, ar->fw.mem_block_size), | |
| &ar->mem_free_blocks); | |
| spin_lock_bh(&ar->mem_lock); | |
| bitmap_release_region(ar->mem_bitmap, cookie - 1, 0); | |
| spin_unlock_bh(&ar->mem_lock); | |
| } | |
| /* Called from any context */ | |
| static void carl9170_tx_release(struct kref *ref) | |
| { | |
| struct ar9170 *ar; | |
| struct carl9170_tx_info *arinfo; | |
| struct ieee80211_tx_info *txinfo; | |
| struct sk_buff *skb; | |
| arinfo = container_of(ref, struct carl9170_tx_info, ref); | |
| txinfo = container_of((void *) arinfo, struct ieee80211_tx_info, | |
| rate_driver_data); | |
| skb = container_of((void *) txinfo, struct sk_buff, cb); | |
| ar = arinfo->ar; | |
| if (WARN_ON_ONCE(!ar)) | |
| return; | |
| BUILD_BUG_ON( | |
| offsetof(struct ieee80211_tx_info, status.ack_signal) != 20); | |
| memset(&txinfo->status.ack_signal, 0, | |
| sizeof(struct ieee80211_tx_info) - | |
| offsetof(struct ieee80211_tx_info, status.ack_signal)); | |
| if (atomic_read(&ar->tx_total_queued)) | |
| ar->tx_schedule = true; | |
| if (txinfo->flags & IEEE80211_TX_CTL_AMPDU) { | |
| if (!atomic_read(&ar->tx_ampdu_upload)) | |
| ar->tx_ampdu_schedule = true; | |
| if (txinfo->flags & IEEE80211_TX_STAT_AMPDU) { | |
| struct _carl9170_tx_superframe *super; | |
| super = (void *)skb->data; | |
| txinfo->status.ampdu_len = super->s.rix; | |
| txinfo->status.ampdu_ack_len = super->s.cnt; | |
| } else if ((txinfo->flags & IEEE80211_TX_STAT_ACK) && | |
| !(txinfo->flags & IEEE80211_TX_CTL_REQ_TX_STATUS)) { | |
| /* | |
| * drop redundant tx_status reports: | |
| * | |
| * 1. ampdu_ack_len of the final tx_status does | |
| * include the feedback of this particular frame. | |
| * | |
| * 2. tx_status_irqsafe only queues up to 128 | |
| * tx feedback reports and discards the rest. | |
| * | |
| * 3. minstrel_ht is picky, it only accepts | |
| * reports of frames with the TX_STATUS_AMPDU flag. | |
| * | |
| * 4. mac80211 is not particularly interested in | |
| * feedback either [CTL_REQ_TX_STATUS not set] | |
| */ | |
| ieee80211_free_txskb(ar->hw, skb); | |
| return; | |
| } else { | |
| /* | |
| * Either the frame transmission has failed or | |
| * mac80211 requested tx status. | |
| */ | |
| } | |
| } | |
| skb_pull(skb, sizeof(struct _carl9170_tx_superframe)); | |
| ieee80211_tx_status_irqsafe(ar->hw, skb); | |
| } | |
| void carl9170_tx_get_skb(struct sk_buff *skb) | |
| { | |
| struct carl9170_tx_info *arinfo = (void *) | |
| (IEEE80211_SKB_CB(skb))->rate_driver_data; | |
| kref_get(&arinfo->ref); | |
| } | |
| int carl9170_tx_put_skb(struct sk_buff *skb) | |
| { | |
| struct carl9170_tx_info *arinfo = (void *) | |
| (IEEE80211_SKB_CB(skb))->rate_driver_data; | |
| return kref_put(&arinfo->ref, carl9170_tx_release); | |
| } | |
| /* Caller must hold the tid_info->lock & rcu_read_lock */ | |
| static void carl9170_tx_shift_bm(struct ar9170 *ar, | |
| struct carl9170_sta_tid *tid_info, u16 seq) | |
| { | |
| u16 off; | |
| off = SEQ_DIFF(seq, tid_info->bsn); | |
| if (WARN_ON_ONCE(off >= CARL9170_BAW_BITS)) | |
| return; | |
| /* | |
| * Sanity check. For each MPDU we set the bit in bitmap and | |
| * clear it once we received the tx_status. | |
| * But if the bit is already cleared then we've been bitten | |
| * by a bug. | |
| */ | |
| WARN_ON_ONCE(!test_and_clear_bit(off, tid_info->bitmap)); | |
| off = SEQ_DIFF(tid_info->snx, tid_info->bsn); | |
| if (WARN_ON_ONCE(off >= CARL9170_BAW_BITS)) | |
| return; | |
| if (!bitmap_empty(tid_info->bitmap, off)) | |
| off = find_first_bit(tid_info->bitmap, off); | |
| tid_info->bsn += off; | |
| tid_info->bsn &= 0x0fff; | |
| bitmap_shift_right(tid_info->bitmap, tid_info->bitmap, | |
| off, CARL9170_BAW_BITS); | |
| } | |
| static void carl9170_tx_status_process_ampdu(struct ar9170 *ar, | |
| struct sk_buff *skb, struct ieee80211_tx_info *txinfo) | |
| { | |
| struct _carl9170_tx_superframe *super = (void *) skb->data; | |
| struct ieee80211_hdr *hdr = (void *) super->frame_data; | |
| struct ieee80211_sta *sta; | |
| struct carl9170_sta_info *sta_info; | |
| struct carl9170_sta_tid *tid_info; | |
| u8 tid; | |
| if (!(txinfo->flags & IEEE80211_TX_CTL_AMPDU) || | |
| txinfo->flags & IEEE80211_TX_CTL_INJECTED) | |
| return; | |
| rcu_read_lock(); | |
| sta = __carl9170_get_tx_sta(ar, skb); | |
| if (unlikely(!sta)) | |
| goto out_rcu; | |
| tid = get_tid_h(hdr); | |
| sta_info = (void *) sta->drv_priv; | |
| tid_info = rcu_dereference(sta_info->agg[tid]); | |
| if (!tid_info) | |
| goto out_rcu; | |
| spin_lock_bh(&tid_info->lock); | |
| if (likely(tid_info->state >= CARL9170_TID_STATE_IDLE)) | |
| carl9170_tx_shift_bm(ar, tid_info, get_seq_h(hdr)); | |
| if (sta_info->stats[tid].clear) { | |
| sta_info->stats[tid].clear = false; | |
| sta_info->stats[tid].req = false; | |
| sta_info->stats[tid].ampdu_len = 0; | |
| sta_info->stats[tid].ampdu_ack_len = 0; | |
| } | |
| sta_info->stats[tid].ampdu_len++; | |
| if (txinfo->status.rates[0].count == 1) | |
| sta_info->stats[tid].ampdu_ack_len++; | |
| if (!(txinfo->flags & IEEE80211_TX_STAT_ACK)) | |
| sta_info->stats[tid].req = true; | |
| if (super->f.mac_control & cpu_to_le16(AR9170_TX_MAC_IMM_BA)) { | |
| super->s.rix = sta_info->stats[tid].ampdu_len; | |
| super->s.cnt = sta_info->stats[tid].ampdu_ack_len; | |
| txinfo->flags |= IEEE80211_TX_STAT_AMPDU; | |
| if (sta_info->stats[tid].req) | |
| txinfo->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; | |
| sta_info->stats[tid].clear = true; | |
| } | |
| spin_unlock_bh(&tid_info->lock); | |
| out_rcu: | |
| rcu_read_unlock(); | |
| } | |
| static void carl9170_tx_bar_status(struct ar9170 *ar, struct sk_buff *skb, | |
| struct ieee80211_tx_info *tx_info) | |
| { | |
| struct _carl9170_tx_superframe *super = (void *) skb->data; | |
| struct ieee80211_bar *bar = (void *) super->frame_data; | |
| /* | |
| * Unlike all other frames, the status report for BARs does | |
| * not directly come from the hardware as it is incapable of | |
| * matching a BA to a previously send BAR. | |
| * Instead the RX-path will scan for incoming BAs and set the | |
| * IEEE80211_TX_STAT_ACK if it sees one that was likely | |
| * caused by a BAR from us. | |
| */ | |
| if (unlikely(ieee80211_is_back_req(bar->frame_control)) && | |
| !(tx_info->flags & IEEE80211_TX_STAT_ACK)) { | |
| struct carl9170_bar_list_entry *entry; | |
| int queue = skb_get_queue_mapping(skb); | |
| rcu_read_lock(); | |
| list_for_each_entry_rcu(entry, &ar->bar_list[queue], list) { | |
| if (entry->skb == skb) { | |
| spin_lock_bh(&ar->bar_list_lock[queue]); | |
| list_del_rcu(&entry->list); | |
| spin_unlock_bh(&ar->bar_list_lock[queue]); | |
| kfree_rcu(entry, head); | |
| goto out; | |
| } | |
| } | |
| WARN(1, "bar not found in %d - ra:%pM ta:%pM c:%x ssn:%x\n", | |
| queue, bar->ra, bar->ta, bar->control, | |
| bar->start_seq_num); | |
| out: | |
| rcu_read_unlock(); | |
| } | |
| } | |
| void carl9170_tx_status(struct ar9170 *ar, struct sk_buff *skb, | |
| const bool success) | |
| { | |
| struct ieee80211_tx_info *txinfo; | |
| carl9170_tx_accounting_free(ar, skb); | |
| txinfo = IEEE80211_SKB_CB(skb); | |
| carl9170_tx_bar_status(ar, skb, txinfo); | |
| if (success) | |
| txinfo->flags |= IEEE80211_TX_STAT_ACK; | |
| else | |
| ar->tx_ack_failures++; | |
| if (txinfo->flags & IEEE80211_TX_CTL_AMPDU) | |
| carl9170_tx_status_process_ampdu(ar, skb, txinfo); | |
| carl9170_tx_ps_unblock(ar, skb); | |
| carl9170_tx_put_skb(skb); | |
| } | |
| /* This function may be called form any context */ | |
| void carl9170_tx_callback(struct ar9170 *ar, struct sk_buff *skb) | |
| { | |
| struct ieee80211_tx_info *txinfo = IEEE80211_SKB_CB(skb); | |
| atomic_dec(&ar->tx_total_pending); | |
| if (txinfo->flags & IEEE80211_TX_CTL_AMPDU) | |
| atomic_dec(&ar->tx_ampdu_upload); | |
| if (carl9170_tx_put_skb(skb)) | |
| tasklet_hi_schedule(&ar->usb_tasklet); | |
| } | |
| static struct sk_buff *carl9170_get_queued_skb(struct ar9170 *ar, u8 cookie, | |
| struct sk_buff_head *queue) | |
| { | |
| struct sk_buff *skb; | |
| spin_lock_bh(&queue->lock); | |
| skb_queue_walk(queue, skb) { | |
| struct _carl9170_tx_superframe *txc = (void *) skb->data; | |
| if (txc->s.cookie != cookie) | |
| continue; | |
| __skb_unlink(skb, queue); | |
| spin_unlock_bh(&queue->lock); | |
| carl9170_release_dev_space(ar, skb); | |
| return skb; | |
| } | |
| spin_unlock_bh(&queue->lock); | |
| return NULL; | |
| } | |
| static void carl9170_tx_fill_rateinfo(struct ar9170 *ar, unsigned int rix, | |
| unsigned int tries, struct ieee80211_tx_info *txinfo) | |
| { | |
| unsigned int i; | |
| for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { | |
| if (txinfo->status.rates[i].idx < 0) | |
| break; | |
| if (i == rix) { | |
| txinfo->status.rates[i].count = tries; | |
| i++; | |
| break; | |
| } | |
| } | |
| for (; i < IEEE80211_TX_MAX_RATES; i++) { | |
| txinfo->status.rates[i].idx = -1; | |
| txinfo->status.rates[i].count = 0; | |
| } | |
| } | |
| static void carl9170_check_queue_stop_timeout(struct ar9170 *ar) | |
| { | |
| int i; | |
| struct sk_buff *skb; | |
| struct ieee80211_tx_info *txinfo; | |
| struct carl9170_tx_info *arinfo; | |
| bool restart = false; | |
| for (i = 0; i < ar->hw->queues; i++) { | |
| spin_lock_bh(&ar->tx_status[i].lock); | |
| skb = skb_peek(&ar->tx_status[i]); | |
| if (!skb) | |
| goto next; | |
| txinfo = IEEE80211_SKB_CB(skb); | |
| arinfo = (void *) txinfo->rate_driver_data; | |
| if (time_is_before_jiffies(arinfo->timeout + | |
| msecs_to_jiffies(CARL9170_QUEUE_STUCK_TIMEOUT)) == true) | |
| restart = true; | |
| next: | |
| spin_unlock_bh(&ar->tx_status[i].lock); | |
| } | |
| if (restart) { | |
| /* | |
| * At least one queue has been stuck for long enough. | |
| * Give the device a kick and hope it gets back to | |
| * work. | |
| * | |
| * possible reasons may include: | |
| * - frames got lost/corrupted (bad connection to the device) | |
| * - stalled rx processing/usb controller hiccups | |
| * - firmware errors/bugs | |
| * - every bug you can think of. | |
| * - all bugs you can't... | |
| * - ... | |
| */ | |
| carl9170_restart(ar, CARL9170_RR_STUCK_TX); | |
| } | |
| } | |
| static void carl9170_tx_ampdu_timeout(struct ar9170 *ar) | |
| { | |
| struct carl9170_sta_tid *iter; | |
| struct sk_buff *skb; | |
| struct ieee80211_tx_info *txinfo; | |
| struct carl9170_tx_info *arinfo; | |
| struct ieee80211_sta *sta; | |
| rcu_read_lock(); | |
| list_for_each_entry_rcu(iter, &ar->tx_ampdu_list, list) { | |
| if (iter->state < CARL9170_TID_STATE_IDLE) | |
| continue; | |
| spin_lock_bh(&iter->lock); | |
| skb = skb_peek(&iter->queue); | |
| if (!skb) | |
| goto unlock; | |
| txinfo = IEEE80211_SKB_CB(skb); | |
| arinfo = (void *)txinfo->rate_driver_data; | |
| if (time_is_after_jiffies(arinfo->timeout + | |
| msecs_to_jiffies(CARL9170_QUEUE_TIMEOUT))) | |
| goto unlock; | |
| sta = iter->sta; | |
| if (WARN_ON(!sta)) | |
| goto unlock; | |
| ieee80211_stop_tx_ba_session(sta, iter->tid); | |
| unlock: | |
| spin_unlock_bh(&iter->lock); | |
| } | |
| rcu_read_unlock(); | |
| } | |
| void carl9170_tx_janitor(struct work_struct *work) | |
| { | |
| struct ar9170 *ar = container_of(work, struct ar9170, | |
| tx_janitor.work); | |
| if (!IS_STARTED(ar)) | |
| return; | |
| ar->tx_janitor_last_run = jiffies; | |
| carl9170_check_queue_stop_timeout(ar); | |
| carl9170_tx_ampdu_timeout(ar); | |
| if (!atomic_read(&ar->tx_total_queued)) | |
| return; | |
| ieee80211_queue_delayed_work(ar->hw, &ar->tx_janitor, | |
| msecs_to_jiffies(CARL9170_TX_TIMEOUT)); | |
| } | |
| static void __carl9170_tx_process_status(struct ar9170 *ar, | |
| const uint8_t cookie, const uint8_t info) | |
| { | |
| struct sk_buff *skb; | |
| struct ieee80211_tx_info *txinfo; | |
| unsigned int r, t, q; | |
| bool success = true; | |
| q = ar9170_qmap[info & CARL9170_TX_STATUS_QUEUE]; | |
| skb = carl9170_get_queued_skb(ar, cookie, &ar->tx_status[q]); | |
| if (!skb) { | |
| /* | |
| * We have lost the race to another thread. | |
| */ | |
| return ; | |
| } | |
| txinfo = IEEE80211_SKB_CB(skb); | |
| if (!(info & CARL9170_TX_STATUS_SUCCESS)) | |
| success = false; | |
| r = (info & CARL9170_TX_STATUS_RIX) >> CARL9170_TX_STATUS_RIX_S; | |
| t = (info & CARL9170_TX_STATUS_TRIES) >> CARL9170_TX_STATUS_TRIES_S; | |
| carl9170_tx_fill_rateinfo(ar, r, t, txinfo); | |
| carl9170_tx_status(ar, skb, success); | |
| } | |
| void carl9170_tx_process_status(struct ar9170 *ar, | |
| const struct carl9170_rsp *cmd) | |
| { | |
| unsigned int i; | |
| for (i = 0; i < cmd->hdr.ext; i++) { | |
| if (WARN_ON(i > ((cmd->hdr.len / 2) + 1))) { | |
| print_hex_dump_bytes("UU:", DUMP_PREFIX_NONE, | |
| (void *) cmd, cmd->hdr.len + 4); | |
| break; | |
| } | |
| __carl9170_tx_process_status(ar, cmd->_tx_status[i].cookie, | |
| cmd->_tx_status[i].info); | |
| } | |
| } | |
| static void carl9170_tx_rate_tpc_chains(struct ar9170 *ar, | |
| struct ieee80211_tx_info *info, struct ieee80211_tx_rate *txrate, | |
| unsigned int *phyrate, unsigned int *tpc, unsigned int *chains) | |
| { | |
| struct ieee80211_rate *rate = NULL; | |
| u8 *txpower; | |
| unsigned int idx; | |
| idx = txrate->idx; | |
| *tpc = 0; | |
| *phyrate = 0; | |
| if (txrate->flags & IEEE80211_TX_RC_MCS) { | |
| if (txrate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) { | |
| /* +1 dBm for HT40 */ | |
| *tpc += 2; | |
| if (info->band == NL80211_BAND_2GHZ) | |
| txpower = ar->power_2G_ht40; | |
| else | |
| txpower = ar->power_5G_ht40; | |
| } else { | |
| if (info->band == NL80211_BAND_2GHZ) | |
| txpower = ar->power_2G_ht20; | |
| else | |
| txpower = ar->power_5G_ht20; | |
| } | |
| *phyrate = txrate->idx; | |
| *tpc += txpower[idx & 7]; | |
| } else { | |
| if (info->band == NL80211_BAND_2GHZ) { | |
| if (idx < 4) | |
| txpower = ar->power_2G_cck; | |
| else | |
| txpower = ar->power_2G_ofdm; | |
| } else { | |
| txpower = ar->power_5G_leg; | |
| idx += 4; | |
| } | |
| rate = &__carl9170_ratetable[idx]; | |
| *tpc += txpower[(rate->hw_value & 0x30) >> 4]; | |
| *phyrate = rate->hw_value & 0xf; | |
| } | |
| if (ar->eeprom.tx_mask == 1) { | |
| *chains = AR9170_TX_PHY_TXCHAIN_1; | |
| } else { | |
| if (!(txrate->flags & IEEE80211_TX_RC_MCS) && | |
| rate && rate->bitrate >= 360) | |
| *chains = AR9170_TX_PHY_TXCHAIN_1; | |
| else | |
| *chains = AR9170_TX_PHY_TXCHAIN_2; | |
| } | |
| *tpc = min_t(unsigned int, *tpc, ar->hw->conf.power_level * 2); | |
| } | |
| static __le32 carl9170_tx_physet(struct ar9170 *ar, | |
| struct ieee80211_tx_info *info, struct ieee80211_tx_rate *txrate) | |
| { | |
| unsigned int power = 0, chains = 0, phyrate = 0; | |
| __le32 tmp; | |
| tmp = cpu_to_le32(0); | |
| if (txrate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) | |
| tmp |= cpu_to_le32(AR9170_TX_PHY_BW_40MHZ << | |
| AR9170_TX_PHY_BW_S); | |
| /* this works because 40 MHz is 2 and dup is 3 */ | |
| if (txrate->flags & IEEE80211_TX_RC_DUP_DATA) | |
| tmp |= cpu_to_le32(AR9170_TX_PHY_BW_40MHZ_DUP << | |
| AR9170_TX_PHY_BW_S); | |
| if (txrate->flags & IEEE80211_TX_RC_SHORT_GI) | |
| tmp |= cpu_to_le32(AR9170_TX_PHY_SHORT_GI); | |
| if (txrate->flags & IEEE80211_TX_RC_MCS) { | |
| SET_VAL(AR9170_TX_PHY_MCS, phyrate, txrate->idx); | |
| /* heavy clip control */ | |
| tmp |= cpu_to_le32((txrate->idx & 0x7) << | |
| AR9170_TX_PHY_TX_HEAVY_CLIP_S); | |
| tmp |= cpu_to_le32(AR9170_TX_PHY_MOD_HT); | |
| /* | |
| * green field preamble does not work. | |
| * | |
| * if (txrate->flags & IEEE80211_TX_RC_GREEN_FIELD) | |
| * tmp |= cpu_to_le32(AR9170_TX_PHY_GREENFIELD); | |
| */ | |
| } else { | |
| if (info->band == NL80211_BAND_2GHZ) { | |
| if (txrate->idx <= AR9170_TX_PHY_RATE_CCK_11M) | |
| tmp |= cpu_to_le32(AR9170_TX_PHY_MOD_CCK); | |
| else | |
| tmp |= cpu_to_le32(AR9170_TX_PHY_MOD_OFDM); | |
| } else { | |
| tmp |= cpu_to_le32(AR9170_TX_PHY_MOD_OFDM); | |
| } | |
| /* | |
| * short preamble seems to be broken too. | |
| * | |
| * if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) | |
| * tmp |= cpu_to_le32(AR9170_TX_PHY_SHORT_PREAMBLE); | |
| */ | |
| } | |
| carl9170_tx_rate_tpc_chains(ar, info, txrate, | |
| &phyrate, &power, &chains); | |
| tmp |= cpu_to_le32(SET_CONSTVAL(AR9170_TX_PHY_MCS, phyrate)); | |
| tmp |= cpu_to_le32(SET_CONSTVAL(AR9170_TX_PHY_TX_PWR, power)); | |
| tmp |= cpu_to_le32(SET_CONSTVAL(AR9170_TX_PHY_TXCHAIN, chains)); | |
| return tmp; | |
| } | |
| static bool carl9170_tx_rts_check(struct ar9170 *ar, | |
| struct ieee80211_tx_rate *rate, | |
| bool ampdu, bool multi) | |
| { | |
| switch (ar->erp_mode) { | |
| case CARL9170_ERP_AUTO: | |
| if (ampdu) | |
| break; | |
| case CARL9170_ERP_MAC80211: | |
| if (!(rate->flags & IEEE80211_TX_RC_USE_RTS_CTS)) | |
| break; | |
| case CARL9170_ERP_RTS: | |
| if (likely(!multi)) | |
| return true; | |
| default: | |
| break; | |
| } | |
| return false; | |
| } | |
| static bool carl9170_tx_cts_check(struct ar9170 *ar, | |
| struct ieee80211_tx_rate *rate) | |
| { | |
| switch (ar->erp_mode) { | |
| case CARL9170_ERP_AUTO: | |
| case CARL9170_ERP_MAC80211: | |
| if (!(rate->flags & IEEE80211_TX_RC_USE_CTS_PROTECT)) | |
| break; | |
| case CARL9170_ERP_CTS: | |
| return true; | |
| default: | |
| break; | |
| } | |
| return false; | |
| } | |
| static void carl9170_tx_get_rates(struct ar9170 *ar, | |
| struct ieee80211_vif *vif, | |
| struct ieee80211_sta *sta, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_tx_info *info; | |
| BUILD_BUG_ON(IEEE80211_TX_MAX_RATES < CARL9170_TX_MAX_RATES); | |
| BUILD_BUG_ON(IEEE80211_TX_MAX_RATES > IEEE80211_TX_RATE_TABLE_SIZE); | |
| info = IEEE80211_SKB_CB(skb); | |
| ieee80211_get_tx_rates(vif, sta, skb, | |
| info->control.rates, | |
| IEEE80211_TX_MAX_RATES); | |
| } | |
| static void carl9170_tx_apply_rateset(struct ar9170 *ar, | |
| struct ieee80211_tx_info *sinfo, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_tx_rate *txrate; | |
| struct ieee80211_tx_info *info; | |
| struct _carl9170_tx_superframe *txc = (void *) skb->data; | |
| int i; | |
| bool ampdu; | |
| bool no_ack; | |
| info = IEEE80211_SKB_CB(skb); | |
| ampdu = !!(info->flags & IEEE80211_TX_CTL_AMPDU); | |
| no_ack = !!(info->flags & IEEE80211_TX_CTL_NO_ACK); | |
| /* Set the rate control probe flag for all (sub-) frames. | |
| * This is because the TX_STATS_AMPDU flag is only set on | |
| * the last frame, so it has to be inherited. | |
| */ | |
| info->flags |= (sinfo->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE); | |
| /* NOTE: For the first rate, the ERP & AMPDU flags are directly | |
| * taken from mac_control. For all fallback rate, the firmware | |
| * updates the mac_control flags from the rate info field. | |
| */ | |
| for (i = 0; i < CARL9170_TX_MAX_RATES; i++) { | |
| __le32 phy_set; | |
| txrate = &sinfo->control.rates[i]; | |
| if (txrate->idx < 0) | |
| break; | |
| phy_set = carl9170_tx_physet(ar, info, txrate); | |
| if (i == 0) { | |
| __le16 mac_tmp = cpu_to_le16(0); | |
| /* first rate - part of the hw's frame header */ | |
| txc->f.phy_control = phy_set; | |
| if (ampdu && txrate->flags & IEEE80211_TX_RC_MCS) | |
| mac_tmp |= cpu_to_le16(AR9170_TX_MAC_AGGR); | |
| if (carl9170_tx_rts_check(ar, txrate, ampdu, no_ack)) | |
| mac_tmp |= cpu_to_le16(AR9170_TX_MAC_PROT_RTS); | |
| else if (carl9170_tx_cts_check(ar, txrate)) | |
| mac_tmp |= cpu_to_le16(AR9170_TX_MAC_PROT_CTS); | |
| txc->f.mac_control |= mac_tmp; | |
| } else { | |
| /* fallback rates are stored in the firmware's | |
| * retry rate set array. | |
| */ | |
| txc->s.rr[i - 1] = phy_set; | |
| } | |
| SET_VAL(CARL9170_TX_SUPER_RI_TRIES, txc->s.ri[i], | |
| txrate->count); | |
| if (carl9170_tx_rts_check(ar, txrate, ampdu, no_ack)) | |
| txc->s.ri[i] |= (AR9170_TX_MAC_PROT_RTS << | |
| CARL9170_TX_SUPER_RI_ERP_PROT_S); | |
| else if (carl9170_tx_cts_check(ar, txrate)) | |
| txc->s.ri[i] |= (AR9170_TX_MAC_PROT_CTS << | |
| CARL9170_TX_SUPER_RI_ERP_PROT_S); | |
| if (ampdu && (txrate->flags & IEEE80211_TX_RC_MCS)) | |
| txc->s.ri[i] |= CARL9170_TX_SUPER_RI_AMPDU; | |
| } | |
| } | |
| static int carl9170_tx_prepare(struct ar9170 *ar, | |
| struct ieee80211_sta *sta, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_hdr *hdr; | |
| struct _carl9170_tx_superframe *txc; | |
| struct carl9170_vif_info *cvif; | |
| struct ieee80211_tx_info *info; | |
| struct carl9170_tx_info *arinfo; | |
| unsigned int hw_queue; | |
| __le16 mac_tmp; | |
| u16 len; | |
| BUILD_BUG_ON(sizeof(*arinfo) > sizeof(info->rate_driver_data)); | |
| BUILD_BUG_ON(sizeof(struct _carl9170_tx_superdesc) != | |
| CARL9170_TX_SUPERDESC_LEN); | |
| BUILD_BUG_ON(sizeof(struct _ar9170_tx_hwdesc) != | |
| AR9170_TX_HWDESC_LEN); | |
| BUILD_BUG_ON(AR9170_MAX_VIRTUAL_MAC > | |
| ((CARL9170_TX_SUPER_MISC_VIF_ID >> | |
| CARL9170_TX_SUPER_MISC_VIF_ID_S) + 1)); | |
| hw_queue = ar9170_qmap[carl9170_get_queue(ar, skb)]; | |
| hdr = (void *)skb->data; | |
| info = IEEE80211_SKB_CB(skb); | |
| len = skb->len; | |
| /* | |
| * Note: If the frame was sent through a monitor interface, | |
| * the ieee80211_vif pointer can be NULL. | |
| */ | |
| if (likely(info->control.vif)) | |
| cvif = (void *) info->control.vif->drv_priv; | |
| else | |
| cvif = NULL; | |
| txc = (void *)skb_push(skb, sizeof(*txc)); | |
| memset(txc, 0, sizeof(*txc)); | |
| SET_VAL(CARL9170_TX_SUPER_MISC_QUEUE, txc->s.misc, hw_queue); | |
| if (likely(cvif)) | |
| SET_VAL(CARL9170_TX_SUPER_MISC_VIF_ID, txc->s.misc, cvif->id); | |
| if (unlikely(info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM)) | |
| txc->s.misc |= CARL9170_TX_SUPER_MISC_CAB; | |
| if (unlikely(info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ)) | |
| txc->s.misc |= CARL9170_TX_SUPER_MISC_ASSIGN_SEQ; | |
| if (unlikely(ieee80211_is_probe_resp(hdr->frame_control))) | |
| txc->s.misc |= CARL9170_TX_SUPER_MISC_FILL_IN_TSF; | |
| mac_tmp = cpu_to_le16(AR9170_TX_MAC_HW_DURATION | | |
| AR9170_TX_MAC_BACKOFF); | |
| mac_tmp |= cpu_to_le16((hw_queue << AR9170_TX_MAC_QOS_S) & | |
| AR9170_TX_MAC_QOS); | |
| if (unlikely(info->flags & IEEE80211_TX_CTL_NO_ACK)) | |
| mac_tmp |= cpu_to_le16(AR9170_TX_MAC_NO_ACK); | |
| if (info->control.hw_key) { | |
| len += info->control.hw_key->icv_len; | |
| switch (info->control.hw_key->cipher) { | |
| case WLAN_CIPHER_SUITE_WEP40: | |
| case WLAN_CIPHER_SUITE_WEP104: | |
| case WLAN_CIPHER_SUITE_TKIP: | |
| mac_tmp |= cpu_to_le16(AR9170_TX_MAC_ENCR_RC4); | |
| break; | |
| case WLAN_CIPHER_SUITE_CCMP: | |
| mac_tmp |= cpu_to_le16(AR9170_TX_MAC_ENCR_AES); | |
| break; | |
| default: | |
| WARN_ON(1); | |
| goto err_out; | |
| } | |
| } | |
| if (info->flags & IEEE80211_TX_CTL_AMPDU) { | |
| unsigned int density, factor; | |
| if (unlikely(!sta || !cvif)) | |
| goto err_out; | |
| factor = min_t(unsigned int, 1u, sta->ht_cap.ampdu_factor); | |
| density = sta->ht_cap.ampdu_density; | |
| if (density) { | |
| /* | |
| * Watch out! | |
| * | |
| * Otus uses slightly different density values than | |
| * those from the 802.11n spec. | |
| */ | |
| density = max_t(unsigned int, density + 1, 7u); | |
| } | |
| SET_VAL(CARL9170_TX_SUPER_AMPDU_DENSITY, | |
| txc->s.ampdu_settings, density); | |
| SET_VAL(CARL9170_TX_SUPER_AMPDU_FACTOR, | |
| txc->s.ampdu_settings, factor); | |
| } | |
| txc->s.len = cpu_to_le16(skb->len); | |
| txc->f.length = cpu_to_le16(len + FCS_LEN); | |
| txc->f.mac_control = mac_tmp; | |
| arinfo = (void *)info->rate_driver_data; | |
| arinfo->timeout = jiffies; | |
| arinfo->ar = ar; | |
| kref_init(&arinfo->ref); | |
| return 0; | |
| err_out: | |
| skb_pull(skb, sizeof(*txc)); | |
| return -EINVAL; | |
| } | |
| static void carl9170_set_immba(struct ar9170 *ar, struct sk_buff *skb) | |
| { | |
| struct _carl9170_tx_superframe *super; | |
| super = (void *) skb->data; | |
| super->f.mac_control |= cpu_to_le16(AR9170_TX_MAC_IMM_BA); | |
| } | |
| static void carl9170_set_ampdu_params(struct ar9170 *ar, struct sk_buff *skb) | |
| { | |
| struct _carl9170_tx_superframe *super; | |
| int tmp; | |
| super = (void *) skb->data; | |
| tmp = (super->s.ampdu_settings & CARL9170_TX_SUPER_AMPDU_DENSITY) << | |
| CARL9170_TX_SUPER_AMPDU_DENSITY_S; | |
| /* | |
| * If you haven't noticed carl9170_tx_prepare has already filled | |
| * in all ampdu spacing & factor parameters. | |
| * Now it's the time to check whenever the settings have to be | |
| * updated by the firmware, or if everything is still the same. | |
| * | |
| * There's no sane way to handle different density values with | |
| * this hardware, so we may as well just do the compare in the | |
| * driver. | |
| */ | |
| if (tmp != ar->current_density) { | |
| ar->current_density = tmp; | |
| super->s.ampdu_settings |= | |
| CARL9170_TX_SUPER_AMPDU_COMMIT_DENSITY; | |
| } | |
| tmp = (super->s.ampdu_settings & CARL9170_TX_SUPER_AMPDU_FACTOR) << | |
| CARL9170_TX_SUPER_AMPDU_FACTOR_S; | |
| if (tmp != ar->current_factor) { | |
| ar->current_factor = tmp; | |
| super->s.ampdu_settings |= | |
| CARL9170_TX_SUPER_AMPDU_COMMIT_FACTOR; | |
| } | |
| } | |
| static void carl9170_tx_ampdu(struct ar9170 *ar) | |
| { | |
| struct sk_buff_head agg; | |
| struct carl9170_sta_tid *tid_info; | |
| struct sk_buff *skb, *first; | |
| struct ieee80211_tx_info *tx_info_first; | |
| unsigned int i = 0, done_ampdus = 0; | |
| u16 seq, queue, tmpssn; | |
| atomic_inc(&ar->tx_ampdu_scheduler); | |
| ar->tx_ampdu_schedule = false; | |
| if (atomic_read(&ar->tx_ampdu_upload)) | |
| return; | |
| if (!ar->tx_ampdu_list_len) | |
| return; | |
| __skb_queue_head_init(&agg); | |
| rcu_read_lock(); | |
| tid_info = rcu_dereference(ar->tx_ampdu_iter); | |
| if (WARN_ON_ONCE(!tid_info)) { | |
| rcu_read_unlock(); | |
| return; | |
| } | |
| retry: | |
| list_for_each_entry_continue_rcu(tid_info, &ar->tx_ampdu_list, list) { | |
| i++; | |
| if (tid_info->state < CARL9170_TID_STATE_PROGRESS) | |
| continue; | |
| queue = TID_TO_WME_AC(tid_info->tid); | |
| spin_lock_bh(&tid_info->lock); | |
| if (tid_info->state != CARL9170_TID_STATE_XMIT) | |
| goto processed; | |
| tid_info->counter++; | |
| first = skb_peek(&tid_info->queue); | |
| tmpssn = carl9170_get_seq(first); | |
| seq = tid_info->snx; | |
| if (unlikely(tmpssn != seq)) { | |
| tid_info->state = CARL9170_TID_STATE_IDLE; | |
| goto processed; | |
| } | |
| tx_info_first = NULL; | |
| while ((skb = skb_peek(&tid_info->queue))) { | |
| /* strict 0, 1, ..., n - 1, n frame sequence order */ | |
| if (unlikely(carl9170_get_seq(skb) != seq)) | |
| break; | |
| /* don't upload more than AMPDU FACTOR allows. */ | |
| if (unlikely(SEQ_DIFF(tid_info->snx, tid_info->bsn) >= | |
| (tid_info->max - 1))) | |
| break; | |
| if (!tx_info_first) { | |
| carl9170_tx_get_rates(ar, tid_info->vif, | |
| tid_info->sta, first); | |
| tx_info_first = IEEE80211_SKB_CB(first); | |
| } | |
| carl9170_tx_apply_rateset(ar, tx_info_first, skb); | |
| atomic_inc(&ar->tx_ampdu_upload); | |
| tid_info->snx = seq = SEQ_NEXT(seq); | |
| __skb_unlink(skb, &tid_info->queue); | |
| __skb_queue_tail(&agg, skb); | |
| if (skb_queue_len(&agg) >= CARL9170_NUM_TX_AGG_MAX) | |
| break; | |
| } | |
| if (skb_queue_empty(&tid_info->queue) || | |
| carl9170_get_seq(skb_peek(&tid_info->queue)) != | |
| tid_info->snx) { | |
| /* stop TID, if A-MPDU frames are still missing, | |
| * or whenever the queue is empty. | |
| */ | |
| tid_info->state = CARL9170_TID_STATE_IDLE; | |
| } | |
| done_ampdus++; | |
| processed: | |
| spin_unlock_bh(&tid_info->lock); | |
| if (skb_queue_empty(&agg)) | |
| continue; | |
| /* apply ampdu spacing & factor settings */ | |
| carl9170_set_ampdu_params(ar, skb_peek(&agg)); | |
| /* set aggregation push bit */ | |
| carl9170_set_immba(ar, skb_peek_tail(&agg)); | |
| spin_lock_bh(&ar->tx_pending[queue].lock); | |
| skb_queue_splice_tail_init(&agg, &ar->tx_pending[queue]); | |
| spin_unlock_bh(&ar->tx_pending[queue].lock); | |
| ar->tx_schedule = true; | |
| } | |
| if ((done_ampdus++ == 0) && (i++ == 0)) | |
| goto retry; | |
| rcu_assign_pointer(ar->tx_ampdu_iter, tid_info); | |
| rcu_read_unlock(); | |
| } | |
| static struct sk_buff *carl9170_tx_pick_skb(struct ar9170 *ar, | |
| struct sk_buff_head *queue) | |
| { | |
| struct sk_buff *skb; | |
| struct ieee80211_tx_info *info; | |
| struct carl9170_tx_info *arinfo; | |
| BUILD_BUG_ON(sizeof(*arinfo) > sizeof(info->rate_driver_data)); | |
| spin_lock_bh(&queue->lock); | |
| skb = skb_peek(queue); | |
| if (unlikely(!skb)) | |
| goto err_unlock; | |
| if (carl9170_alloc_dev_space(ar, skb)) | |
| goto err_unlock; | |
| __skb_unlink(skb, queue); | |
| spin_unlock_bh(&queue->lock); | |
| info = IEEE80211_SKB_CB(skb); | |
| arinfo = (void *) info->rate_driver_data; | |
| arinfo->timeout = jiffies; | |
| return skb; | |
| err_unlock: | |
| spin_unlock_bh(&queue->lock); | |
| return NULL; | |
| } | |
| void carl9170_tx_drop(struct ar9170 *ar, struct sk_buff *skb) | |
| { | |
| struct _carl9170_tx_superframe *super; | |
| uint8_t q = 0; | |
| ar->tx_dropped++; | |
| super = (void *)skb->data; | |
| SET_VAL(CARL9170_TX_SUPER_MISC_QUEUE, q, | |
| ar9170_qmap[carl9170_get_queue(ar, skb)]); | |
| __carl9170_tx_process_status(ar, super->s.cookie, q); | |
| } | |
| static bool carl9170_tx_ps_drop(struct ar9170 *ar, struct sk_buff *skb) | |
| { | |
| struct ieee80211_sta *sta; | |
| struct carl9170_sta_info *sta_info; | |
| struct ieee80211_tx_info *tx_info; | |
| rcu_read_lock(); | |
| sta = __carl9170_get_tx_sta(ar, skb); | |
| if (!sta) | |
| goto out_rcu; | |
| sta_info = (void *) sta->drv_priv; | |
| tx_info = IEEE80211_SKB_CB(skb); | |
| if (unlikely(sta_info->sleeping) && | |
| !(tx_info->flags & (IEEE80211_TX_CTL_NO_PS_BUFFER | | |
| IEEE80211_TX_CTL_CLEAR_PS_FILT))) { | |
| rcu_read_unlock(); | |
| if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) | |
| atomic_dec(&ar->tx_ampdu_upload); | |
| tx_info->flags |= IEEE80211_TX_STAT_TX_FILTERED; | |
| carl9170_release_dev_space(ar, skb); | |
| carl9170_tx_status(ar, skb, false); | |
| return true; | |
| } | |
| out_rcu: | |
| rcu_read_unlock(); | |
| return false; | |
| } | |
| static void carl9170_bar_check(struct ar9170 *ar, struct sk_buff *skb) | |
| { | |
| struct _carl9170_tx_superframe *super = (void *) skb->data; | |
| struct ieee80211_bar *bar = (void *) super->frame_data; | |
| if (unlikely(ieee80211_is_back_req(bar->frame_control)) && | |
| skb->len >= sizeof(struct ieee80211_bar)) { | |
| struct carl9170_bar_list_entry *entry; | |
| unsigned int queue = skb_get_queue_mapping(skb); | |
| entry = kmalloc(sizeof(*entry), GFP_ATOMIC); | |
| if (!WARN_ON_ONCE(!entry)) { | |
| entry->skb = skb; | |
| spin_lock_bh(&ar->bar_list_lock[queue]); | |
| list_add_tail_rcu(&entry->list, &ar->bar_list[queue]); | |
| spin_unlock_bh(&ar->bar_list_lock[queue]); | |
| } | |
| } | |
| } | |
| static void carl9170_tx(struct ar9170 *ar) | |
| { | |
| struct sk_buff *skb; | |
| unsigned int i, q; | |
| bool schedule_garbagecollector = false; | |
| ar->tx_schedule = false; | |
| if (unlikely(!IS_STARTED(ar))) | |
| return; | |
| carl9170_usb_handle_tx_err(ar); | |
| for (i = 0; i < ar->hw->queues; i++) { | |
| while (!skb_queue_empty(&ar->tx_pending[i])) { | |
| skb = carl9170_tx_pick_skb(ar, &ar->tx_pending[i]); | |
| if (unlikely(!skb)) | |
| break; | |
| if (unlikely(carl9170_tx_ps_drop(ar, skb))) | |
| continue; | |
| carl9170_bar_check(ar, skb); | |
| atomic_inc(&ar->tx_total_pending); | |
| q = __carl9170_get_queue(ar, i); | |
| /* | |
| * NB: tx_status[i] vs. tx_status[q], | |
| * TODO: Move into pick_skb or alloc_dev_space. | |
| */ | |
| skb_queue_tail(&ar->tx_status[q], skb); | |
| /* | |
| * increase ref count to "2". | |
| * Ref counting is the easiest way to solve the | |
| * race between the urb's completion routine: | |
| * carl9170_tx_callback | |
| * and wlan tx status functions: | |
| * carl9170_tx_status/janitor. | |
| */ | |
| carl9170_tx_get_skb(skb); | |
| carl9170_usb_tx(ar, skb); | |
| schedule_garbagecollector = true; | |
| } | |
| } | |
| if (!schedule_garbagecollector) | |
| return; | |
| ieee80211_queue_delayed_work(ar->hw, &ar->tx_janitor, | |
| msecs_to_jiffies(CARL9170_TX_TIMEOUT)); | |
| } | |
| static bool carl9170_tx_ampdu_queue(struct ar9170 *ar, | |
| struct ieee80211_sta *sta, struct sk_buff *skb, | |
| struct ieee80211_tx_info *txinfo) | |
| { | |
| struct carl9170_sta_info *sta_info; | |
| struct carl9170_sta_tid *agg; | |
| struct sk_buff *iter; | |
| u16 tid, seq, qseq, off; | |
| bool run = false; | |
| tid = carl9170_get_tid(skb); | |
| seq = carl9170_get_seq(skb); | |
| sta_info = (void *) sta->drv_priv; | |
| rcu_read_lock(); | |
| agg = rcu_dereference(sta_info->agg[tid]); | |
| if (!agg) | |
| goto err_unlock_rcu; | |
| spin_lock_bh(&agg->lock); | |
| if (unlikely(agg->state < CARL9170_TID_STATE_IDLE)) | |
| goto err_unlock; | |
| /* check if sequence is within the BA window */ | |
| if (unlikely(!BAW_WITHIN(agg->bsn, CARL9170_BAW_BITS, seq))) | |
| goto err_unlock; | |
| if (WARN_ON_ONCE(!BAW_WITHIN(agg->snx, CARL9170_BAW_BITS, seq))) | |
| goto err_unlock; | |
| off = SEQ_DIFF(seq, agg->bsn); | |
| if (WARN_ON_ONCE(test_and_set_bit(off, agg->bitmap))) | |
| goto err_unlock; | |
| if (likely(BAW_WITHIN(agg->hsn, CARL9170_BAW_BITS, seq))) { | |
| __skb_queue_tail(&agg->queue, skb); | |
| agg->hsn = seq; | |
| goto queued; | |
| } | |
| skb_queue_reverse_walk(&agg->queue, iter) { | |
| qseq = carl9170_get_seq(iter); | |
| if (BAW_WITHIN(qseq, CARL9170_BAW_BITS, seq)) { | |
| __skb_queue_after(&agg->queue, iter, skb); | |
| goto queued; | |
| } | |
| } | |
| __skb_queue_head(&agg->queue, skb); | |
| queued: | |
| if (unlikely(agg->state != CARL9170_TID_STATE_XMIT)) { | |
| if (agg->snx == carl9170_get_seq(skb_peek(&agg->queue))) { | |
| agg->state = CARL9170_TID_STATE_XMIT; | |
| run = true; | |
| } | |
| } | |
| spin_unlock_bh(&agg->lock); | |
| rcu_read_unlock(); | |
| return run; | |
| err_unlock: | |
| spin_unlock_bh(&agg->lock); | |
| err_unlock_rcu: | |
| rcu_read_unlock(); | |
| txinfo->flags &= ~IEEE80211_TX_CTL_AMPDU; | |
| carl9170_tx_status(ar, skb, false); | |
| ar->tx_dropped++; | |
| return false; | |
| } | |
| void carl9170_op_tx(struct ieee80211_hw *hw, | |
| struct ieee80211_tx_control *control, | |
| struct sk_buff *skb) | |
| { | |
| struct ar9170 *ar = hw->priv; | |
| struct ieee80211_tx_info *info; | |
| struct ieee80211_sta *sta = control->sta; | |
| struct ieee80211_vif *vif; | |
| bool run; | |
| if (unlikely(!IS_STARTED(ar))) | |
| goto err_free; | |
| info = IEEE80211_SKB_CB(skb); | |
| vif = info->control.vif; | |
| if (unlikely(carl9170_tx_prepare(ar, sta, skb))) | |
| goto err_free; | |
| carl9170_tx_accounting(ar, skb); | |
| /* | |
| * from now on, one has to use carl9170_tx_status to free | |
| * all ressouces which are associated with the frame. | |
| */ | |
| if (sta) { | |
| struct carl9170_sta_info *stai = (void *) sta->drv_priv; | |
| atomic_inc(&stai->pending_frames); | |
| } | |
| if (info->flags & IEEE80211_TX_CTL_AMPDU) { | |
| /* to static code analyzers and reviewers: | |
| * mac80211 guarantees that a valid "sta" | |
| * reference is present, if a frame is to | |
| * be part of an ampdu. Hence any extra | |
| * sta == NULL checks are redundant in this | |
| * special case. | |
| */ | |
| run = carl9170_tx_ampdu_queue(ar, sta, skb, info); | |
| if (run) | |
| carl9170_tx_ampdu(ar); | |
| } else { | |
| unsigned int queue = skb_get_queue_mapping(skb); | |
| carl9170_tx_get_rates(ar, vif, sta, skb); | |
| carl9170_tx_apply_rateset(ar, info, skb); | |
| skb_queue_tail(&ar->tx_pending[queue], skb); | |
| } | |
| carl9170_tx(ar); | |
| return; | |
| err_free: | |
| ar->tx_dropped++; | |
| ieee80211_free_txskb(ar->hw, skb); | |
| } | |
| void carl9170_tx_scheduler(struct ar9170 *ar) | |
| { | |
| if (ar->tx_ampdu_schedule) | |
| carl9170_tx_ampdu(ar); | |
| if (ar->tx_schedule) | |
| carl9170_tx(ar); | |
| } | |
| /* caller has to take rcu_read_lock */ | |
| static struct carl9170_vif_info *carl9170_pick_beaconing_vif(struct ar9170 *ar) | |
| { | |
| struct carl9170_vif_info *cvif; | |
| int i = 1; | |
| /* The AR9170 hardware has no fancy beacon queue or some | |
| * other scheduling mechanism. So, the driver has to make | |
| * due by setting the two beacon timers (pretbtt and tbtt) | |
| * once and then swapping the beacon address in the HW's | |
| * register file each time the pretbtt fires. | |
| */ | |
| cvif = rcu_dereference(ar->beacon_iter); | |
| if (ar->vifs > 0 && cvif) { | |
| do { | |
| list_for_each_entry_continue_rcu(cvif, &ar->vif_list, | |
| list) { | |
| if (cvif->active && cvif->enable_beacon) | |
| goto out; | |
| } | |
| } while (ar->beacon_enabled && i--); | |
| } | |
| out: | |
| RCU_INIT_POINTER(ar->beacon_iter, cvif); | |
| return cvif; | |
| } | |
| static bool carl9170_tx_beacon_physet(struct ar9170 *ar, struct sk_buff *skb, | |
| u32 *ht1, u32 *plcp) | |
| { | |
| struct ieee80211_tx_info *txinfo; | |
| struct ieee80211_tx_rate *rate; | |
| unsigned int power, chains; | |
| bool ht_rate; | |
| txinfo = IEEE80211_SKB_CB(skb); | |
| rate = &txinfo->control.rates[0]; | |
| ht_rate = !!(txinfo->control.rates[0].flags & IEEE80211_TX_RC_MCS); | |
| carl9170_tx_rate_tpc_chains(ar, txinfo, rate, plcp, &power, &chains); | |
| *ht1 = AR9170_MAC_BCN_HT1_TX_ANT0; | |
| if (chains == AR9170_TX_PHY_TXCHAIN_2) | |
| *ht1 |= AR9170_MAC_BCN_HT1_TX_ANT1; | |
| SET_VAL(AR9170_MAC_BCN_HT1_PWR_CTRL, *ht1, 7); | |
| SET_VAL(AR9170_MAC_BCN_HT1_TPC, *ht1, power); | |
| SET_VAL(AR9170_MAC_BCN_HT1_CHAIN_MASK, *ht1, chains); | |
| if (ht_rate) { | |
| *ht1 |= AR9170_MAC_BCN_HT1_HT_EN; | |
| if (rate->flags & IEEE80211_TX_RC_SHORT_GI) | |
| *plcp |= AR9170_MAC_BCN_HT2_SGI; | |
| if (rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) { | |
| *ht1 |= AR9170_MAC_BCN_HT1_BWC_40M_SHARED; | |
| *plcp |= AR9170_MAC_BCN_HT2_BW40; | |
| } else if (rate->flags & IEEE80211_TX_RC_DUP_DATA) { | |
| *ht1 |= AR9170_MAC_BCN_HT1_BWC_40M_DUP; | |
| *plcp |= AR9170_MAC_BCN_HT2_BW40; | |
| } | |
| SET_VAL(AR9170_MAC_BCN_HT2_LEN, *plcp, skb->len + FCS_LEN); | |
| } else { | |
| if (*plcp <= AR9170_TX_PHY_RATE_CCK_11M) | |
| *plcp |= ((skb->len + FCS_LEN) << (3 + 16)) + 0x0400; | |
| else | |
| *plcp |= ((skb->len + FCS_LEN) << 16) + 0x0010; | |
| } | |
| return ht_rate; | |
| } | |
| int carl9170_update_beacon(struct ar9170 *ar, const bool submit) | |
| { | |
| struct sk_buff *skb = NULL; | |
| struct carl9170_vif_info *cvif; | |
| __le32 *data, *old = NULL; | |
| u32 word, ht1, plcp, off, addr, len; | |
| int i = 0, err = 0; | |
| bool ht_rate; | |
| rcu_read_lock(); | |
| cvif = carl9170_pick_beaconing_vif(ar); | |
| if (!cvif) | |
| goto out_unlock; | |
| skb = ieee80211_beacon_get_tim(ar->hw, carl9170_get_vif(cvif), | |
| NULL, NULL); | |
| if (!skb) { | |
| err = -ENOMEM; | |
| goto err_free; | |
| } | |
| spin_lock_bh(&ar->beacon_lock); | |
| data = (__le32 *)skb->data; | |
| if (cvif->beacon) | |
| old = (__le32 *)cvif->beacon->data; | |
| off = cvif->id * AR9170_MAC_BCN_LENGTH_MAX; | |
| addr = ar->fw.beacon_addr + off; | |
| len = roundup(skb->len + FCS_LEN, 4); | |
| if ((off + len) > ar->fw.beacon_max_len) { | |
| if (net_ratelimit()) { | |
| wiphy_err(ar->hw->wiphy, "beacon does not " | |
| "fit into device memory!\n"); | |
| } | |
| err = -EINVAL; | |
| goto err_unlock; | |
| } | |
| if (len > AR9170_MAC_BCN_LENGTH_MAX) { | |
| if (net_ratelimit()) { | |
| wiphy_err(ar->hw->wiphy, "no support for beacons " | |
| "bigger than %d (yours:%d).\n", | |
| AR9170_MAC_BCN_LENGTH_MAX, len); | |
| } | |
| err = -EMSGSIZE; | |
| goto err_unlock; | |
| } | |
| ht_rate = carl9170_tx_beacon_physet(ar, skb, &ht1, &plcp); | |
| carl9170_async_regwrite_begin(ar); | |
| carl9170_async_regwrite(AR9170_MAC_REG_BCN_HT1, ht1); | |
| if (ht_rate) | |
| carl9170_async_regwrite(AR9170_MAC_REG_BCN_HT2, plcp); | |
| else | |
| carl9170_async_regwrite(AR9170_MAC_REG_BCN_PLCP, plcp); | |
| for (i = 0; i < DIV_ROUND_UP(skb->len, 4); i++) { | |
| /* | |
| * XXX: This accesses beyond skb data for up | |
| * to the last 3 bytes!! | |
| */ | |
| if (old && (data[i] == old[i])) | |
| continue; | |
| word = le32_to_cpu(data[i]); | |
| carl9170_async_regwrite(addr + 4 * i, word); | |
| } | |
| carl9170_async_regwrite_finish(); | |
| dev_kfree_skb_any(cvif->beacon); | |
| cvif->beacon = NULL; | |
| err = carl9170_async_regwrite_result(); | |
| if (!err) | |
| cvif->beacon = skb; | |
| spin_unlock_bh(&ar->beacon_lock); | |
| if (err) | |
| goto err_free; | |
| if (submit) { | |
| err = carl9170_bcn_ctrl(ar, cvif->id, | |
| CARL9170_BCN_CTRL_CAB_TRIGGER, | |
| addr, skb->len + FCS_LEN); | |
| if (err) | |
| goto err_free; | |
| } | |
| out_unlock: | |
| rcu_read_unlock(); | |
| return 0; | |
| err_unlock: | |
| spin_unlock_bh(&ar->beacon_lock); | |
| err_free: | |
| rcu_read_unlock(); | |
| dev_kfree_skb_any(skb); | |
| return err; | |
| } |