| /****************************************************************************** | |
| * | |
| * This file is provided under a dual BSD/GPLv2 license. When using or | |
| * redistributing this file, you may do so under either license. | |
| * | |
| * GPL LICENSE SUMMARY | |
| * | |
| * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved. | |
| * Copyright (C) 2016 Intel Deutschland GmbH | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of version 2 of the GNU General Public License as | |
| * published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, | |
| * USA | |
| * | |
| * The full GNU General Public License is included in this distribution | |
| * in the file called COPYING. | |
| * | |
| * Contact Information: | |
| * Intel Linux Wireless <linuxwifi@intel.com> | |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | |
| * | |
| * BSD LICENSE | |
| * | |
| * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. | |
| * Copyright (C) 2016 Intel Deutschland GmbH | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * | |
| * * Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * * Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in | |
| * the documentation and/or other materials provided with the | |
| * distribution. | |
| * * Neither the name Intel Corporation nor the names of its | |
| * contributors may be used to endorse or promote products derived | |
| * from this software without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| * | |
| *****************************************************************************/ | |
| #ifndef __IWL_CONFIG_H__ | |
| #define __IWL_CONFIG_H__ | |
| #include <linux/types.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/ieee80211.h> | |
| #include <linux/nl80211.h> | |
| enum iwl_device_family { | |
| IWL_DEVICE_FAMILY_UNDEFINED, | |
| IWL_DEVICE_FAMILY_1000, | |
| IWL_DEVICE_FAMILY_100, | |
| IWL_DEVICE_FAMILY_2000, | |
| IWL_DEVICE_FAMILY_2030, | |
| IWL_DEVICE_FAMILY_105, | |
| IWL_DEVICE_FAMILY_135, | |
| IWL_DEVICE_FAMILY_5000, | |
| IWL_DEVICE_FAMILY_5150, | |
| IWL_DEVICE_FAMILY_6000, | |
| IWL_DEVICE_FAMILY_6000i, | |
| IWL_DEVICE_FAMILY_6005, | |
| IWL_DEVICE_FAMILY_6030, | |
| IWL_DEVICE_FAMILY_6050, | |
| IWL_DEVICE_FAMILY_6150, | |
| IWL_DEVICE_FAMILY_7000, | |
| IWL_DEVICE_FAMILY_8000, | |
| }; | |
| static inline bool iwl_has_secure_boot(u32 hw_rev, | |
| enum iwl_device_family family) | |
| { | |
| /* return 1 only for family 8000 B0 */ | |
| if ((family == IWL_DEVICE_FAMILY_8000) && (hw_rev & 0xC)) | |
| return true; | |
| return false; | |
| } | |
| /* | |
| * LED mode | |
| * IWL_LED_DEFAULT: use device default | |
| * IWL_LED_RF_STATE: turn LED on/off based on RF state | |
| * LED ON = RF ON | |
| * LED OFF = RF OFF | |
| * IWL_LED_BLINK: adjust led blink rate based on blink table | |
| * IWL_LED_DISABLE: led disabled | |
| */ | |
| enum iwl_led_mode { | |
| IWL_LED_DEFAULT, | |
| IWL_LED_RF_STATE, | |
| IWL_LED_BLINK, | |
| IWL_LED_DISABLE, | |
| }; | |
| /* | |
| * This is the threshold value of plcp error rate per 100mSecs. It is | |
| * used to set and check for the validity of plcp_delta. | |
| */ | |
| #define IWL_MAX_PLCP_ERR_THRESHOLD_MIN 1 | |
| #define IWL_MAX_PLCP_ERR_THRESHOLD_DEF 50 | |
| #define IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF 100 | |
| #define IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF 200 | |
| #define IWL_MAX_PLCP_ERR_THRESHOLD_MAX 255 | |
| #define IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE 0 | |
| /* TX queue watchdog timeouts in mSecs */ | |
| #define IWL_WATCHDOG_DISABLED 0 | |
| #define IWL_DEF_WD_TIMEOUT 2500 | |
| #define IWL_LONG_WD_TIMEOUT 10000 | |
| #define IWL_MAX_WD_TIMEOUT 120000 | |
| #define IWL_DEFAULT_MAX_TX_POWER 22 | |
| #define IWL_TX_CSUM_NETIF_FLAGS (NETIF_F_IPV6_CSUM | NETIF_F_IP_CSUM |\ | |
| NETIF_F_TSO | NETIF_F_TSO6) | |
| /* Antenna presence definitions */ | |
| #define ANT_NONE 0x0 | |
| #define ANT_A BIT(0) | |
| #define ANT_B BIT(1) | |
| #define ANT_C BIT(2) | |
| #define ANT_AB (ANT_A | ANT_B) | |
| #define ANT_AC (ANT_A | ANT_C) | |
| #define ANT_BC (ANT_B | ANT_C) | |
| #define ANT_ABC (ANT_A | ANT_B | ANT_C) | |
| static inline u8 num_of_ant(u8 mask) | |
| { | |
| return !!((mask) & ANT_A) + | |
| !!((mask) & ANT_B) + | |
| !!((mask) & ANT_C); | |
| } | |
| /* | |
| * @max_ll_items: max number of OTP blocks | |
| * @shadow_ram_support: shadow support for OTP memory | |
| * @led_compensation: compensate on the led on/off time per HW according | |
| * to the deviation to achieve the desired led frequency. | |
| * The detail algorithm is described in iwl-led.c | |
| * @wd_timeout: TX queues watchdog timeout | |
| * @max_event_log_size: size of event log buffer size for ucode event logging | |
| * @shadow_reg_enable: HW shadow register support | |
| * @apmg_wake_up_wa: should the MAC access REQ be asserted when a command | |
| * is in flight. This is due to a HW bug in 7260, 3160 and 7265. | |
| * @scd_chain_ext_wa: should the chain extension feature in SCD be disabled. | |
| */ | |
| struct iwl_base_params { | |
| unsigned int wd_timeout; | |
| u16 eeprom_size; | |
| u16 max_event_log_size; | |
| u8 pll_cfg:1, /* for iwl_pcie_apm_init() */ | |
| shadow_ram_support:1, | |
| shadow_reg_enable:1, | |
| pcie_l1_allowed:1, | |
| apmg_wake_up_wa:1, | |
| scd_chain_ext_wa:1; | |
| u8 num_of_queues; /* def: HW dependent */ | |
| u8 max_ll_items; | |
| u8 led_compensation; | |
| }; | |
| /* | |
| * @stbc: support Tx STBC and 1*SS Rx STBC | |
| * @ldpc: support Tx/Rx with LDPC | |
| * @use_rts_for_aggregation: use rts/cts protection for HT traffic | |
| * @ht40_bands: bitmap of bands (using %NL80211_BAND_*) that support HT40 | |
| */ | |
| struct iwl_ht_params { | |
| u8 ht_greenfield_support:1, | |
| stbc:1, | |
| ldpc:1, | |
| use_rts_for_aggregation:1; | |
| u8 ht40_bands; | |
| }; | |
| /* | |
| * Tx-backoff threshold | |
| * @temperature: The threshold in Celsius | |
| * @backoff: The tx-backoff in uSec | |
| */ | |
| struct iwl_tt_tx_backoff { | |
| s32 temperature; | |
| u32 backoff; | |
| }; | |
| #define TT_TX_BACKOFF_SIZE 6 | |
| /** | |
| * struct iwl_tt_params - thermal throttling parameters | |
| * @ct_kill_entry: CT Kill entry threshold | |
| * @ct_kill_exit: CT Kill exit threshold | |
| * @ct_kill_duration: The time intervals (in uSec) in which the driver needs | |
| * to checks whether to exit CT Kill. | |
| * @dynamic_smps_entry: Dynamic SMPS entry threshold | |
| * @dynamic_smps_exit: Dynamic SMPS exit threshold | |
| * @tx_protection_entry: TX protection entry threshold | |
| * @tx_protection_exit: TX protection exit threshold | |
| * @tx_backoff: Array of thresholds for tx-backoff , in ascending order. | |
| * @support_ct_kill: Support CT Kill? | |
| * @support_dynamic_smps: Support dynamic SMPS? | |
| * @support_tx_protection: Support tx protection? | |
| * @support_tx_backoff: Support tx-backoff? | |
| */ | |
| struct iwl_tt_params { | |
| u32 ct_kill_entry; | |
| u32 ct_kill_exit; | |
| u32 ct_kill_duration; | |
| u32 dynamic_smps_entry; | |
| u32 dynamic_smps_exit; | |
| u32 tx_protection_entry; | |
| u32 tx_protection_exit; | |
| struct iwl_tt_tx_backoff tx_backoff[TT_TX_BACKOFF_SIZE]; | |
| u8 support_ct_kill:1, | |
| support_dynamic_smps:1, | |
| support_tx_protection:1, | |
| support_tx_backoff:1; | |
| }; | |
| /* | |
| * information on how to parse the EEPROM | |
| */ | |
| #define EEPROM_REG_BAND_1_CHANNELS 0x08 | |
| #define EEPROM_REG_BAND_2_CHANNELS 0x26 | |
| #define EEPROM_REG_BAND_3_CHANNELS 0x42 | |
| #define EEPROM_REG_BAND_4_CHANNELS 0x5C | |
| #define EEPROM_REG_BAND_5_CHANNELS 0x74 | |
| #define EEPROM_REG_BAND_24_HT40_CHANNELS 0x82 | |
| #define EEPROM_REG_BAND_52_HT40_CHANNELS 0x92 | |
| #define EEPROM_6000_REG_BAND_24_HT40_CHANNELS 0x80 | |
| #define EEPROM_REGULATORY_BAND_NO_HT40 0 | |
| /* lower blocks contain EEPROM image and calibration data */ | |
| #define OTP_LOW_IMAGE_SIZE (2 * 512 * sizeof(u16)) /* 2 KB */ | |
| #define OTP_LOW_IMAGE_SIZE_FAMILY_7000 (16 * 512 * sizeof(u16)) /* 16 KB */ | |
| #define OTP_LOW_IMAGE_SIZE_FAMILY_8000 (32 * 512 * sizeof(u16)) /* 32 KB */ | |
| #define OTP_LOW_IMAGE_SIZE_FAMILY_9000 OTP_LOW_IMAGE_SIZE_FAMILY_8000 | |
| #define OTP_LOW_IMAGE_SIZE_FAMILY_A000 OTP_LOW_IMAGE_SIZE_FAMILY_9000 | |
| struct iwl_eeprom_params { | |
| const u8 regulatory_bands[7]; | |
| bool enhanced_txpower; | |
| }; | |
| /* Tx-backoff power threshold | |
| * @pwr: The power limit in mw | |
| * @backoff: The tx-backoff in uSec | |
| */ | |
| struct iwl_pwr_tx_backoff { | |
| u32 pwr; | |
| u32 backoff; | |
| }; | |
| /** | |
| * struct iwl_cfg | |
| * @name: Official name of the device | |
| * @fw_name_pre: Firmware filename prefix. The api version and extension | |
| * (.ucode) will be added to filename before loading from disk. The | |
| * filename is constructed as fw_name_pre<api>.ucode. | |
| * @ucode_api_max: Highest version of uCode API supported by driver. | |
| * @ucode_api_min: Lowest version of uCode API supported by driver. | |
| * @max_inst_size: The maximal length of the fw inst section | |
| * @max_data_size: The maximal length of the fw data section | |
| * @valid_tx_ant: valid transmit antenna | |
| * @valid_rx_ant: valid receive antenna | |
| * @non_shared_ant: the antenna that is for WiFi only | |
| * @nvm_ver: NVM version | |
| * @nvm_calib_ver: NVM calibration version | |
| * @lib: pointer to the lib ops | |
| * @base_params: pointer to basic parameters | |
| * @ht_params: point to ht parameters | |
| * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off) | |
| * @rx_with_siso_diversity: 1x1 device with rx antenna diversity | |
| * @internal_wimax_coex: internal wifi/wimax combo device | |
| * @high_temp: Is this NIC is designated to be in high temperature. | |
| * @host_interrupt_operation_mode: device needs host interrupt operation | |
| * mode set | |
| * @nvm_hw_section_num: the ID of the HW NVM section | |
| * @mac_addr_from_csr: read HW address from CSR registers | |
| * @features: hw features, any combination of feature_whitelist | |
| * @pwr_tx_backoffs: translation table between power limits and backoffs | |
| * @max_rx_agg_size: max RX aggregation size of the ADDBA request/response | |
| * @max_tx_agg_size: max TX aggregation size of the ADDBA request/response | |
| * @max_ht_ampdu_factor: the exponent of the max length of A-MPDU that the | |
| * station can receive in HT | |
| * @max_vht_ampdu_exponent: the exponent of the max length of A-MPDU that the | |
| * station can receive in VHT | |
| * @dccm_offset: offset from which DCCM begins | |
| * @dccm_len: length of DCCM (including runtime stack CCM) | |
| * @dccm2_offset: offset from which the second DCCM begins | |
| * @dccm2_len: length of the second DCCM | |
| * @smem_offset: offset from which the SMEM begins | |
| * @smem_len: the length of SMEM | |
| * @mq_rx_supported: multi-queue rx support | |
| * @vht_mu_mimo_supported: VHT MU-MIMO support | |
| * @rf_id: need to read rf_id to determine the firmware image | |
| * @integrated: discrete or integrated | |
| * | |
| * We enable the driver to be backward compatible wrt. hardware features. | |
| * API differences in uCode shouldn't be handled here but through TLVs | |
| * and/or the uCode API version instead. | |
| */ | |
| struct iwl_cfg { | |
| /* params specific to an individual device within a device family */ | |
| const char *name; | |
| const char *fw_name_pre; | |
| /* params not likely to change within a device family */ | |
| const struct iwl_base_params *base_params; | |
| /* params likely to change within a device family */ | |
| const struct iwl_ht_params *ht_params; | |
| const struct iwl_eeprom_params *eeprom_params; | |
| const struct iwl_pwr_tx_backoff *pwr_tx_backoffs; | |
| const char *default_nvm_file_B_step; | |
| const char *default_nvm_file_C_step; | |
| const struct iwl_tt_params *thermal_params; | |
| enum iwl_device_family device_family; | |
| enum iwl_led_mode led_mode; | |
| u32 max_data_size; | |
| u32 max_inst_size; | |
| netdev_features_t features; | |
| u32 dccm_offset; | |
| u32 dccm_len; | |
| u32 dccm2_offset; | |
| u32 dccm2_len; | |
| u32 smem_offset; | |
| u32 smem_len; | |
| u16 nvm_ver; | |
| u16 nvm_calib_ver; | |
| u16 rx_with_siso_diversity:1, | |
| bt_shared_single_ant:1, | |
| internal_wimax_coex:1, | |
| host_interrupt_operation_mode:1, | |
| high_temp:1, | |
| mac_addr_from_csr:1, | |
| lp_xtal_workaround:1, | |
| disable_dummy_notification:1, | |
| apmg_not_supported:1, | |
| mq_rx_supported:1, | |
| vht_mu_mimo_supported:1, | |
| rf_id:1, | |
| integrated:1, | |
| use_tfh:1; | |
| u8 valid_tx_ant; | |
| u8 valid_rx_ant; | |
| u8 non_shared_ant; | |
| u8 nvm_hw_section_num; | |
| u8 max_rx_agg_size; | |
| u8 max_tx_agg_size; | |
| u8 max_ht_ampdu_exponent; | |
| u8 max_vht_ampdu_exponent; | |
| u8 ucode_api_max; | |
| u8 ucode_api_min; | |
| }; | |
| /* | |
| * This list declares the config structures for all devices. | |
| */ | |
| #if IS_ENABLED(CONFIG_IWLDVM) | |
| extern const struct iwl_cfg iwl5300_agn_cfg; | |
| extern const struct iwl_cfg iwl5100_agn_cfg; | |
| extern const struct iwl_cfg iwl5350_agn_cfg; | |
| extern const struct iwl_cfg iwl5100_bgn_cfg; | |
| extern const struct iwl_cfg iwl5100_abg_cfg; | |
| extern const struct iwl_cfg iwl5150_agn_cfg; | |
| extern const struct iwl_cfg iwl5150_abg_cfg; | |
| extern const struct iwl_cfg iwl6005_2agn_cfg; | |
| extern const struct iwl_cfg iwl6005_2abg_cfg; | |
| extern const struct iwl_cfg iwl6005_2bg_cfg; | |
| extern const struct iwl_cfg iwl6005_2agn_sff_cfg; | |
| extern const struct iwl_cfg iwl6005_2agn_d_cfg; | |
| extern const struct iwl_cfg iwl6005_2agn_mow1_cfg; | |
| extern const struct iwl_cfg iwl6005_2agn_mow2_cfg; | |
| extern const struct iwl_cfg iwl1030_bgn_cfg; | |
| extern const struct iwl_cfg iwl1030_bg_cfg; | |
| extern const struct iwl_cfg iwl6030_2agn_cfg; | |
| extern const struct iwl_cfg iwl6030_2abg_cfg; | |
| extern const struct iwl_cfg iwl6030_2bgn_cfg; | |
| extern const struct iwl_cfg iwl6030_2bg_cfg; | |
| extern const struct iwl_cfg iwl6000i_2agn_cfg; | |
| extern const struct iwl_cfg iwl6000i_2abg_cfg; | |
| extern const struct iwl_cfg iwl6000i_2bg_cfg; | |
| extern const struct iwl_cfg iwl6000_3agn_cfg; | |
| extern const struct iwl_cfg iwl6050_2agn_cfg; | |
| extern const struct iwl_cfg iwl6050_2abg_cfg; | |
| extern const struct iwl_cfg iwl6150_bgn_cfg; | |
| extern const struct iwl_cfg iwl6150_bg_cfg; | |
| extern const struct iwl_cfg iwl1000_bgn_cfg; | |
| extern const struct iwl_cfg iwl1000_bg_cfg; | |
| extern const struct iwl_cfg iwl100_bgn_cfg; | |
| extern const struct iwl_cfg iwl100_bg_cfg; | |
| extern const struct iwl_cfg iwl130_bgn_cfg; | |
| extern const struct iwl_cfg iwl130_bg_cfg; | |
| extern const struct iwl_cfg iwl2000_2bgn_cfg; | |
| extern const struct iwl_cfg iwl2000_2bgn_d_cfg; | |
| extern const struct iwl_cfg iwl2030_2bgn_cfg; | |
| extern const struct iwl_cfg iwl6035_2agn_cfg; | |
| extern const struct iwl_cfg iwl6035_2agn_sff_cfg; | |
| extern const struct iwl_cfg iwl105_bgn_cfg; | |
| extern const struct iwl_cfg iwl105_bgn_d_cfg; | |
| extern const struct iwl_cfg iwl135_bgn_cfg; | |
| #endif /* CONFIG_IWLDVM */ | |
| #if IS_ENABLED(CONFIG_IWLMVM) | |
| extern const struct iwl_cfg iwl7260_2ac_cfg; | |
| extern const struct iwl_cfg iwl7260_2ac_cfg_high_temp; | |
| extern const struct iwl_cfg iwl7260_2n_cfg; | |
| extern const struct iwl_cfg iwl7260_n_cfg; | |
| extern const struct iwl_cfg iwl3160_2ac_cfg; | |
| extern const struct iwl_cfg iwl3160_2n_cfg; | |
| extern const struct iwl_cfg iwl3160_n_cfg; | |
| extern const struct iwl_cfg iwl3165_2ac_cfg; | |
| extern const struct iwl_cfg iwl3168_2ac_cfg; | |
| extern const struct iwl_cfg iwl7265_2ac_cfg; | |
| extern const struct iwl_cfg iwl7265_2n_cfg; | |
| extern const struct iwl_cfg iwl7265_n_cfg; | |
| extern const struct iwl_cfg iwl7265d_2ac_cfg; | |
| extern const struct iwl_cfg iwl7265d_2n_cfg; | |
| extern const struct iwl_cfg iwl7265d_n_cfg; | |
| extern const struct iwl_cfg iwl8260_2n_cfg; | |
| extern const struct iwl_cfg iwl8260_2ac_cfg; | |
| extern const struct iwl_cfg iwl8265_2ac_cfg; | |
| extern const struct iwl_cfg iwl8275_2ac_cfg; | |
| extern const struct iwl_cfg iwl4165_2ac_cfg; | |
| extern const struct iwl_cfg iwl8260_2ac_sdio_cfg; | |
| extern const struct iwl_cfg iwl8265_2ac_sdio_cfg; | |
| extern const struct iwl_cfg iwl4165_2ac_sdio_cfg; | |
| extern const struct iwl_cfg iwl9000lc_2ac_cfg; | |
| extern const struct iwl_cfg iwl9160_2ac_cfg; | |
| extern const struct iwl_cfg iwl9260_2ac_cfg; | |
| extern const struct iwl_cfg iwl9270_2ac_cfg; | |
| extern const struct iwl_cfg iwl9460_2ac_cfg; | |
| extern const struct iwl_cfg iwl9560_2ac_cfg; | |
| extern const struct iwl_cfg iwla000_2ac_cfg; | |
| #endif /* CONFIG_IWLMVM */ | |
| #endif /* __IWL_CONFIG_H__ */ |