| /****************************************************************************** | |
| * | |
| * This file is provided under a dual BSD/GPLv2 license. When using or | |
| * redistributing this file, you may do so under either license. | |
| * | |
| * GPL LICENSE SUMMARY | |
| * | |
| * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved. | |
| * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH | |
| * Copyright(c) 2016 Intel Deutschland GmbH | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of version 2 of the GNU General Public License as | |
| * published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, | |
| * USA | |
| * | |
| * The full GNU General Public License is included in this distribution | |
| * in the file called COPYING. | |
| * | |
| * Contact Information: | |
| * Intel Linux Wireless <linuxwifi@intel.com> | |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | |
| * | |
| * BSD LICENSE | |
| * | |
| * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. | |
| * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH | |
| * Copyright(c) 2016 Intel Deutschland GmbH | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * | |
| * * Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * * Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in | |
| * the documentation and/or other materials provided with the | |
| * distribution. | |
| * * Neither the name Intel Corporation nor the names of its | |
| * contributors may be used to endorse or promote products derived | |
| * from this software without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| * | |
| *****************************************************************************/ | |
| #include <linux/completion.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/firmware.h> | |
| #include <linux/module.h> | |
| #include <linux/vmalloc.h> | |
| #include "iwl-drv.h" | |
| #include "iwl-csr.h" | |
| #include "iwl-debug.h" | |
| #include "iwl-trans.h" | |
| #include "iwl-op-mode.h" | |
| #include "iwl-agn-hw.h" | |
| #include "iwl-fw.h" | |
| #include "iwl-config.h" | |
| #include "iwl-modparams.h" | |
| /****************************************************************************** | |
| * | |
| * module boiler plate | |
| * | |
| ******************************************************************************/ | |
| #define DRV_DESCRIPTION "Intel(R) Wireless WiFi driver for Linux" | |
| MODULE_DESCRIPTION(DRV_DESCRIPTION); | |
| MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR); | |
| MODULE_LICENSE("GPL"); | |
| #ifdef CONFIG_IWLWIFI_DEBUGFS | |
| static struct dentry *iwl_dbgfs_root; | |
| #endif | |
| /** | |
| * struct iwl_drv - drv common data | |
| * @list: list of drv structures using this opmode | |
| * @fw: the iwl_fw structure | |
| * @op_mode: the running op_mode | |
| * @trans: transport layer | |
| * @dev: for debug prints only | |
| * @cfg: configuration struct | |
| * @fw_index: firmware revision to try loading | |
| * @firmware_name: composite filename of ucode file to load | |
| * @request_firmware_complete: the firmware has been obtained from user space | |
| */ | |
| struct iwl_drv { | |
| struct list_head list; | |
| struct iwl_fw fw; | |
| struct iwl_op_mode *op_mode; | |
| struct iwl_trans *trans; | |
| struct device *dev; | |
| const struct iwl_cfg *cfg; | |
| int fw_index; /* firmware we're trying to load */ | |
| char firmware_name[64]; /* name of firmware file to load */ | |
| struct completion request_firmware_complete; | |
| #ifdef CONFIG_IWLWIFI_DEBUGFS | |
| struct dentry *dbgfs_drv; | |
| struct dentry *dbgfs_trans; | |
| struct dentry *dbgfs_op_mode; | |
| #endif | |
| }; | |
| enum { | |
| DVM_OP_MODE, | |
| MVM_OP_MODE, | |
| }; | |
| /* Protects the table contents, i.e. the ops pointer & drv list */ | |
| static struct mutex iwlwifi_opmode_table_mtx; | |
| static struct iwlwifi_opmode_table { | |
| const char *name; /* name: iwldvm, iwlmvm, etc */ | |
| const struct iwl_op_mode_ops *ops; /* pointer to op_mode ops */ | |
| struct list_head drv; /* list of devices using this op_mode */ | |
| } iwlwifi_opmode_table[] = { /* ops set when driver is initialized */ | |
| [DVM_OP_MODE] = { .name = "iwldvm", .ops = NULL }, | |
| [MVM_OP_MODE] = { .name = "iwlmvm", .ops = NULL }, | |
| }; | |
| #define IWL_DEFAULT_SCAN_CHANNELS 40 | |
| /* | |
| * struct fw_sec: Just for the image parsing process. | |
| * For the fw storage we are using struct fw_desc. | |
| */ | |
| struct fw_sec { | |
| const void *data; /* the sec data */ | |
| size_t size; /* section size */ | |
| u32 offset; /* offset of writing in the device */ | |
| }; | |
| static void iwl_free_fw_desc(struct iwl_drv *drv, struct fw_desc *desc) | |
| { | |
| vfree(desc->data); | |
| desc->data = NULL; | |
| desc->len = 0; | |
| } | |
| static void iwl_free_fw_img(struct iwl_drv *drv, struct fw_img *img) | |
| { | |
| int i; | |
| for (i = 0; i < IWL_UCODE_SECTION_MAX; i++) | |
| iwl_free_fw_desc(drv, &img->sec[i]); | |
| } | |
| static void iwl_dealloc_ucode(struct iwl_drv *drv) | |
| { | |
| int i; | |
| kfree(drv->fw.dbg_dest_tlv); | |
| for (i = 0; i < ARRAY_SIZE(drv->fw.dbg_conf_tlv); i++) | |
| kfree(drv->fw.dbg_conf_tlv[i]); | |
| for (i = 0; i < ARRAY_SIZE(drv->fw.dbg_trigger_tlv); i++) | |
| kfree(drv->fw.dbg_trigger_tlv[i]); | |
| for (i = 0; i < ARRAY_SIZE(drv->fw.dbg_mem_tlv); i++) | |
| kfree(drv->fw.dbg_mem_tlv[i]); | |
| for (i = 0; i < IWL_UCODE_TYPE_MAX; i++) | |
| iwl_free_fw_img(drv, drv->fw.img + i); | |
| } | |
| static int iwl_alloc_fw_desc(struct iwl_drv *drv, struct fw_desc *desc, | |
| struct fw_sec *sec) | |
| { | |
| void *data; | |
| desc->data = NULL; | |
| if (!sec || !sec->size) | |
| return -EINVAL; | |
| data = vmalloc(sec->size); | |
| if (!data) | |
| return -ENOMEM; | |
| desc->len = sec->size; | |
| desc->offset = sec->offset; | |
| memcpy(data, sec->data, desc->len); | |
| desc->data = data; | |
| return 0; | |
| } | |
| static void iwl_req_fw_callback(const struct firmware *ucode_raw, | |
| void *context); | |
| static int iwl_request_firmware(struct iwl_drv *drv, bool first) | |
| { | |
| const char *name_pre = drv->cfg->fw_name_pre; | |
| char tag[8]; | |
| if (first) { | |
| drv->fw_index = drv->cfg->ucode_api_max; | |
| sprintf(tag, "%d", drv->fw_index); | |
| } else { | |
| drv->fw_index--; | |
| sprintf(tag, "%d", drv->fw_index); | |
| } | |
| if (drv->fw_index < drv->cfg->ucode_api_min) { | |
| IWL_ERR(drv, "no suitable firmware found!\n"); | |
| return -ENOENT; | |
| } | |
| snprintf(drv->firmware_name, sizeof(drv->firmware_name), "%s%s.ucode", | |
| name_pre, tag); | |
| IWL_DEBUG_INFO(drv, "attempting to load firmware '%s'\n", | |
| drv->firmware_name); | |
| return request_firmware_nowait(THIS_MODULE, 1, drv->firmware_name, | |
| drv->trans->dev, | |
| GFP_KERNEL, drv, iwl_req_fw_callback); | |
| } | |
| struct fw_img_parsing { | |
| struct fw_sec sec[IWL_UCODE_SECTION_MAX]; | |
| int sec_counter; | |
| }; | |
| /* | |
| * struct fw_sec_parsing: to extract fw section and it's offset from tlv | |
| */ | |
| struct fw_sec_parsing { | |
| __le32 offset; | |
| const u8 data[]; | |
| } __packed; | |
| /** | |
| * struct iwl_tlv_calib_data - parse the default calib data from TLV | |
| * | |
| * @ucode_type: the uCode to which the following default calib relates. | |
| * @calib: default calibrations. | |
| */ | |
| struct iwl_tlv_calib_data { | |
| __le32 ucode_type; | |
| struct iwl_tlv_calib_ctrl calib; | |
| } __packed; | |
| struct iwl_firmware_pieces { | |
| struct fw_img_parsing img[IWL_UCODE_TYPE_MAX]; | |
| u32 init_evtlog_ptr, init_evtlog_size, init_errlog_ptr; | |
| u32 inst_evtlog_ptr, inst_evtlog_size, inst_errlog_ptr; | |
| /* FW debug data parsed for driver usage */ | |
| struct iwl_fw_dbg_dest_tlv *dbg_dest_tlv; | |
| struct iwl_fw_dbg_conf_tlv *dbg_conf_tlv[FW_DBG_CONF_MAX]; | |
| size_t dbg_conf_tlv_len[FW_DBG_CONF_MAX]; | |
| struct iwl_fw_dbg_trigger_tlv *dbg_trigger_tlv[FW_DBG_TRIGGER_MAX]; | |
| size_t dbg_trigger_tlv_len[FW_DBG_TRIGGER_MAX]; | |
| struct iwl_fw_dbg_mem_seg_tlv *dbg_mem_tlv[FW_DBG_MEM_MAX]; | |
| }; | |
| /* | |
| * These functions are just to extract uCode section data from the pieces | |
| * structure. | |
| */ | |
| static struct fw_sec *get_sec(struct iwl_firmware_pieces *pieces, | |
| enum iwl_ucode_type type, | |
| int sec) | |
| { | |
| return &pieces->img[type].sec[sec]; | |
| } | |
| static void set_sec_data(struct iwl_firmware_pieces *pieces, | |
| enum iwl_ucode_type type, | |
| int sec, | |
| const void *data) | |
| { | |
| pieces->img[type].sec[sec].data = data; | |
| } | |
| static void set_sec_size(struct iwl_firmware_pieces *pieces, | |
| enum iwl_ucode_type type, | |
| int sec, | |
| size_t size) | |
| { | |
| pieces->img[type].sec[sec].size = size; | |
| } | |
| static size_t get_sec_size(struct iwl_firmware_pieces *pieces, | |
| enum iwl_ucode_type type, | |
| int sec) | |
| { | |
| return pieces->img[type].sec[sec].size; | |
| } | |
| static void set_sec_offset(struct iwl_firmware_pieces *pieces, | |
| enum iwl_ucode_type type, | |
| int sec, | |
| u32 offset) | |
| { | |
| pieces->img[type].sec[sec].offset = offset; | |
| } | |
| static int iwl_store_cscheme(struct iwl_fw *fw, const u8 *data, const u32 len) | |
| { | |
| int i, j; | |
| struct iwl_fw_cscheme_list *l = (struct iwl_fw_cscheme_list *)data; | |
| struct iwl_fw_cipher_scheme *fwcs; | |
| if (len < sizeof(*l) || | |
| len < sizeof(l->size) + l->size * sizeof(l->cs[0])) | |
| return -EINVAL; | |
| for (i = 0, j = 0; i < IWL_UCODE_MAX_CS && i < l->size; i++) { | |
| fwcs = &l->cs[j]; | |
| /* we skip schemes with zero cipher suite selector */ | |
| if (!fwcs->cipher) | |
| continue; | |
| fw->cs[j++] = *fwcs; | |
| } | |
| return 0; | |
| } | |
| static void iwl_store_gscan_capa(struct iwl_fw *fw, const u8 *data, | |
| const u32 len) | |
| { | |
| struct iwl_fw_gscan_capabilities *fw_capa = (void *)data; | |
| struct iwl_gscan_capabilities *capa = &fw->gscan_capa; | |
| capa->max_scan_cache_size = le32_to_cpu(fw_capa->max_scan_cache_size); | |
| capa->max_scan_buckets = le32_to_cpu(fw_capa->max_scan_buckets); | |
| capa->max_ap_cache_per_scan = | |
| le32_to_cpu(fw_capa->max_ap_cache_per_scan); | |
| capa->max_rssi_sample_size = le32_to_cpu(fw_capa->max_rssi_sample_size); | |
| capa->max_scan_reporting_threshold = | |
| le32_to_cpu(fw_capa->max_scan_reporting_threshold); | |
| capa->max_hotlist_aps = le32_to_cpu(fw_capa->max_hotlist_aps); | |
| capa->max_significant_change_aps = | |
| le32_to_cpu(fw_capa->max_significant_change_aps); | |
| capa->max_bssid_history_entries = | |
| le32_to_cpu(fw_capa->max_bssid_history_entries); | |
| capa->max_hotlist_ssids = le32_to_cpu(fw_capa->max_hotlist_ssids); | |
| capa->max_number_epno_networks = | |
| le32_to_cpu(fw_capa->max_number_epno_networks); | |
| capa->max_number_epno_networks_by_ssid = | |
| le32_to_cpu(fw_capa->max_number_epno_networks_by_ssid); | |
| capa->max_number_of_white_listed_ssid = | |
| le32_to_cpu(fw_capa->max_number_of_white_listed_ssid); | |
| capa->max_number_of_black_listed_ssid = | |
| le32_to_cpu(fw_capa->max_number_of_black_listed_ssid); | |
| } | |
| /* | |
| * Gets uCode section from tlv. | |
| */ | |
| static int iwl_store_ucode_sec(struct iwl_firmware_pieces *pieces, | |
| const void *data, enum iwl_ucode_type type, | |
| int size) | |
| { | |
| struct fw_img_parsing *img; | |
| struct fw_sec *sec; | |
| struct fw_sec_parsing *sec_parse; | |
| if (WARN_ON(!pieces || !data || type >= IWL_UCODE_TYPE_MAX)) | |
| return -1; | |
| sec_parse = (struct fw_sec_parsing *)data; | |
| img = &pieces->img[type]; | |
| sec = &img->sec[img->sec_counter]; | |
| sec->offset = le32_to_cpu(sec_parse->offset); | |
| sec->data = sec_parse->data; | |
| sec->size = size - sizeof(sec_parse->offset); | |
| ++img->sec_counter; | |
| return 0; | |
| } | |
| static int iwl_set_default_calib(struct iwl_drv *drv, const u8 *data) | |
| { | |
| struct iwl_tlv_calib_data *def_calib = | |
| (struct iwl_tlv_calib_data *)data; | |
| u32 ucode_type = le32_to_cpu(def_calib->ucode_type); | |
| if (ucode_type >= IWL_UCODE_TYPE_MAX) { | |
| IWL_ERR(drv, "Wrong ucode_type %u for default calibration.\n", | |
| ucode_type); | |
| return -EINVAL; | |
| } | |
| drv->fw.default_calib[ucode_type].flow_trigger = | |
| def_calib->calib.flow_trigger; | |
| drv->fw.default_calib[ucode_type].event_trigger = | |
| def_calib->calib.event_trigger; | |
| return 0; | |
| } | |
| static int iwl_set_ucode_api_flags(struct iwl_drv *drv, const u8 *data, | |
| struct iwl_ucode_capabilities *capa) | |
| { | |
| const struct iwl_ucode_api *ucode_api = (void *)data; | |
| u32 api_index = le32_to_cpu(ucode_api->api_index); | |
| u32 api_flags = le32_to_cpu(ucode_api->api_flags); | |
| int i; | |
| if (api_index >= DIV_ROUND_UP(NUM_IWL_UCODE_TLV_API, 32)) { | |
| IWL_ERR(drv, | |
| "api flags index %d larger than supported by driver\n", | |
| api_index); | |
| /* don't return an error so we can load FW that has more bits */ | |
| return 0; | |
| } | |
| for (i = 0; i < 32; i++) { | |
| if (api_flags & BIT(i)) | |
| __set_bit(i + 32 * api_index, capa->_api); | |
| } | |
| return 0; | |
| } | |
| static int iwl_set_ucode_capabilities(struct iwl_drv *drv, const u8 *data, | |
| struct iwl_ucode_capabilities *capa) | |
| { | |
| const struct iwl_ucode_capa *ucode_capa = (void *)data; | |
| u32 api_index = le32_to_cpu(ucode_capa->api_index); | |
| u32 api_flags = le32_to_cpu(ucode_capa->api_capa); | |
| int i; | |
| if (api_index >= DIV_ROUND_UP(NUM_IWL_UCODE_TLV_CAPA, 32)) { | |
| IWL_ERR(drv, | |
| "capa flags index %d larger than supported by driver\n", | |
| api_index); | |
| /* don't return an error so we can load FW that has more bits */ | |
| return 0; | |
| } | |
| for (i = 0; i < 32; i++) { | |
| if (api_flags & BIT(i)) | |
| __set_bit(i + 32 * api_index, capa->_capa); | |
| } | |
| return 0; | |
| } | |
| static int iwl_parse_v1_v2_firmware(struct iwl_drv *drv, | |
| const struct firmware *ucode_raw, | |
| struct iwl_firmware_pieces *pieces) | |
| { | |
| struct iwl_ucode_header *ucode = (void *)ucode_raw->data; | |
| u32 api_ver, hdr_size, build; | |
| char buildstr[25]; | |
| const u8 *src; | |
| drv->fw.ucode_ver = le32_to_cpu(ucode->ver); | |
| api_ver = IWL_UCODE_API(drv->fw.ucode_ver); | |
| switch (api_ver) { | |
| default: | |
| hdr_size = 28; | |
| if (ucode_raw->size < hdr_size) { | |
| IWL_ERR(drv, "File size too small!\n"); | |
| return -EINVAL; | |
| } | |
| build = le32_to_cpu(ucode->u.v2.build); | |
| set_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_INST, | |
| le32_to_cpu(ucode->u.v2.inst_size)); | |
| set_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA, | |
| le32_to_cpu(ucode->u.v2.data_size)); | |
| set_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST, | |
| le32_to_cpu(ucode->u.v2.init_size)); | |
| set_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA, | |
| le32_to_cpu(ucode->u.v2.init_data_size)); | |
| src = ucode->u.v2.data; | |
| break; | |
| case 0: | |
| case 1: | |
| case 2: | |
| hdr_size = 24; | |
| if (ucode_raw->size < hdr_size) { | |
| IWL_ERR(drv, "File size too small!\n"); | |
| return -EINVAL; | |
| } | |
| build = 0; | |
| set_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_INST, | |
| le32_to_cpu(ucode->u.v1.inst_size)); | |
| set_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA, | |
| le32_to_cpu(ucode->u.v1.data_size)); | |
| set_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST, | |
| le32_to_cpu(ucode->u.v1.init_size)); | |
| set_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA, | |
| le32_to_cpu(ucode->u.v1.init_data_size)); | |
| src = ucode->u.v1.data; | |
| break; | |
| } | |
| if (build) | |
| sprintf(buildstr, " build %u", build); | |
| else | |
| buildstr[0] = '\0'; | |
| snprintf(drv->fw.fw_version, | |
| sizeof(drv->fw.fw_version), | |
| "%u.%u.%u.%u%s", | |
| IWL_UCODE_MAJOR(drv->fw.ucode_ver), | |
| IWL_UCODE_MINOR(drv->fw.ucode_ver), | |
| IWL_UCODE_API(drv->fw.ucode_ver), | |
| IWL_UCODE_SERIAL(drv->fw.ucode_ver), | |
| buildstr); | |
| /* Verify size of file vs. image size info in file's header */ | |
| if (ucode_raw->size != hdr_size + | |
| get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_INST) + | |
| get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA) + | |
| get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST) + | |
| get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA)) { | |
| IWL_ERR(drv, | |
| "uCode file size %d does not match expected size\n", | |
| (int)ucode_raw->size); | |
| return -EINVAL; | |
| } | |
| set_sec_data(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_INST, src); | |
| src += get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_INST); | |
| set_sec_offset(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_INST, | |
| IWLAGN_RTC_INST_LOWER_BOUND); | |
| set_sec_data(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA, src); | |
| src += get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA); | |
| set_sec_offset(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA, | |
| IWLAGN_RTC_DATA_LOWER_BOUND); | |
| set_sec_data(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST, src); | |
| src += get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST); | |
| set_sec_offset(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST, | |
| IWLAGN_RTC_INST_LOWER_BOUND); | |
| set_sec_data(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA, src); | |
| src += get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA); | |
| set_sec_offset(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA, | |
| IWLAGN_RTC_DATA_LOWER_BOUND); | |
| return 0; | |
| } | |
| static int iwl_parse_tlv_firmware(struct iwl_drv *drv, | |
| const struct firmware *ucode_raw, | |
| struct iwl_firmware_pieces *pieces, | |
| struct iwl_ucode_capabilities *capa, | |
| bool *usniffer_images) | |
| { | |
| struct iwl_tlv_ucode_header *ucode = (void *)ucode_raw->data; | |
| struct iwl_ucode_tlv *tlv; | |
| size_t len = ucode_raw->size; | |
| const u8 *data; | |
| u32 tlv_len; | |
| u32 usniffer_img; | |
| enum iwl_ucode_tlv_type tlv_type; | |
| const u8 *tlv_data; | |
| char buildstr[25]; | |
| u32 build, paging_mem_size; | |
| int num_of_cpus; | |
| bool usniffer_req = false; | |
| bool gscan_capa = false; | |
| if (len < sizeof(*ucode)) { | |
| IWL_ERR(drv, "uCode has invalid length: %zd\n", len); | |
| return -EINVAL; | |
| } | |
| if (ucode->magic != cpu_to_le32(IWL_TLV_UCODE_MAGIC)) { | |
| IWL_ERR(drv, "invalid uCode magic: 0X%x\n", | |
| le32_to_cpu(ucode->magic)); | |
| return -EINVAL; | |
| } | |
| drv->fw.ucode_ver = le32_to_cpu(ucode->ver); | |
| memcpy(drv->fw.human_readable, ucode->human_readable, | |
| sizeof(drv->fw.human_readable)); | |
| build = le32_to_cpu(ucode->build); | |
| if (build) | |
| sprintf(buildstr, " build %u", build); | |
| else | |
| buildstr[0] = '\0'; | |
| snprintf(drv->fw.fw_version, | |
| sizeof(drv->fw.fw_version), | |
| "%u.%u.%u.%u%s", | |
| IWL_UCODE_MAJOR(drv->fw.ucode_ver), | |
| IWL_UCODE_MINOR(drv->fw.ucode_ver), | |
| IWL_UCODE_API(drv->fw.ucode_ver), | |
| IWL_UCODE_SERIAL(drv->fw.ucode_ver), | |
| buildstr); | |
| data = ucode->data; | |
| len -= sizeof(*ucode); | |
| while (len >= sizeof(*tlv)) { | |
| len -= sizeof(*tlv); | |
| tlv = (void *)data; | |
| tlv_len = le32_to_cpu(tlv->length); | |
| tlv_type = le32_to_cpu(tlv->type); | |
| tlv_data = tlv->data; | |
| if (len < tlv_len) { | |
| IWL_ERR(drv, "invalid TLV len: %zd/%u\n", | |
| len, tlv_len); | |
| return -EINVAL; | |
| } | |
| len -= ALIGN(tlv_len, 4); | |
| data += sizeof(*tlv) + ALIGN(tlv_len, 4); | |
| switch (tlv_type) { | |
| case IWL_UCODE_TLV_INST: | |
| set_sec_data(pieces, IWL_UCODE_REGULAR, | |
| IWL_UCODE_SECTION_INST, tlv_data); | |
| set_sec_size(pieces, IWL_UCODE_REGULAR, | |
| IWL_UCODE_SECTION_INST, tlv_len); | |
| set_sec_offset(pieces, IWL_UCODE_REGULAR, | |
| IWL_UCODE_SECTION_INST, | |
| IWLAGN_RTC_INST_LOWER_BOUND); | |
| break; | |
| case IWL_UCODE_TLV_DATA: | |
| set_sec_data(pieces, IWL_UCODE_REGULAR, | |
| IWL_UCODE_SECTION_DATA, tlv_data); | |
| set_sec_size(pieces, IWL_UCODE_REGULAR, | |
| IWL_UCODE_SECTION_DATA, tlv_len); | |
| set_sec_offset(pieces, IWL_UCODE_REGULAR, | |
| IWL_UCODE_SECTION_DATA, | |
| IWLAGN_RTC_DATA_LOWER_BOUND); | |
| break; | |
| case IWL_UCODE_TLV_INIT: | |
| set_sec_data(pieces, IWL_UCODE_INIT, | |
| IWL_UCODE_SECTION_INST, tlv_data); | |
| set_sec_size(pieces, IWL_UCODE_INIT, | |
| IWL_UCODE_SECTION_INST, tlv_len); | |
| set_sec_offset(pieces, IWL_UCODE_INIT, | |
| IWL_UCODE_SECTION_INST, | |
| IWLAGN_RTC_INST_LOWER_BOUND); | |
| break; | |
| case IWL_UCODE_TLV_INIT_DATA: | |
| set_sec_data(pieces, IWL_UCODE_INIT, | |
| IWL_UCODE_SECTION_DATA, tlv_data); | |
| set_sec_size(pieces, IWL_UCODE_INIT, | |
| IWL_UCODE_SECTION_DATA, tlv_len); | |
| set_sec_offset(pieces, IWL_UCODE_INIT, | |
| IWL_UCODE_SECTION_DATA, | |
| IWLAGN_RTC_DATA_LOWER_BOUND); | |
| break; | |
| case IWL_UCODE_TLV_BOOT: | |
| IWL_ERR(drv, "Found unexpected BOOT ucode\n"); | |
| break; | |
| case IWL_UCODE_TLV_PROBE_MAX_LEN: | |
| if (tlv_len != sizeof(u32)) | |
| goto invalid_tlv_len; | |
| capa->max_probe_length = | |
| le32_to_cpup((__le32 *)tlv_data); | |
| break; | |
| case IWL_UCODE_TLV_PAN: | |
| if (tlv_len) | |
| goto invalid_tlv_len; | |
| capa->flags |= IWL_UCODE_TLV_FLAGS_PAN; | |
| break; | |
| case IWL_UCODE_TLV_FLAGS: | |
| /* must be at least one u32 */ | |
| if (tlv_len < sizeof(u32)) | |
| goto invalid_tlv_len; | |
| /* and a proper number of u32s */ | |
| if (tlv_len % sizeof(u32)) | |
| goto invalid_tlv_len; | |
| /* | |
| * This driver only reads the first u32 as | |
| * right now no more features are defined, | |
| * if that changes then either the driver | |
| * will not work with the new firmware, or | |
| * it'll not take advantage of new features. | |
| */ | |
| capa->flags = le32_to_cpup((__le32 *)tlv_data); | |
| break; | |
| case IWL_UCODE_TLV_API_CHANGES_SET: | |
| if (tlv_len != sizeof(struct iwl_ucode_api)) | |
| goto invalid_tlv_len; | |
| if (iwl_set_ucode_api_flags(drv, tlv_data, capa)) | |
| goto tlv_error; | |
| break; | |
| case IWL_UCODE_TLV_ENABLED_CAPABILITIES: | |
| if (tlv_len != sizeof(struct iwl_ucode_capa)) | |
| goto invalid_tlv_len; | |
| if (iwl_set_ucode_capabilities(drv, tlv_data, capa)) | |
| goto tlv_error; | |
| break; | |
| case IWL_UCODE_TLV_INIT_EVTLOG_PTR: | |
| if (tlv_len != sizeof(u32)) | |
| goto invalid_tlv_len; | |
| pieces->init_evtlog_ptr = | |
| le32_to_cpup((__le32 *)tlv_data); | |
| break; | |
| case IWL_UCODE_TLV_INIT_EVTLOG_SIZE: | |
| if (tlv_len != sizeof(u32)) | |
| goto invalid_tlv_len; | |
| pieces->init_evtlog_size = | |
| le32_to_cpup((__le32 *)tlv_data); | |
| break; | |
| case IWL_UCODE_TLV_INIT_ERRLOG_PTR: | |
| if (tlv_len != sizeof(u32)) | |
| goto invalid_tlv_len; | |
| pieces->init_errlog_ptr = | |
| le32_to_cpup((__le32 *)tlv_data); | |
| break; | |
| case IWL_UCODE_TLV_RUNT_EVTLOG_PTR: | |
| if (tlv_len != sizeof(u32)) | |
| goto invalid_tlv_len; | |
| pieces->inst_evtlog_ptr = | |
| le32_to_cpup((__le32 *)tlv_data); | |
| break; | |
| case IWL_UCODE_TLV_RUNT_EVTLOG_SIZE: | |
| if (tlv_len != sizeof(u32)) | |
| goto invalid_tlv_len; | |
| pieces->inst_evtlog_size = | |
| le32_to_cpup((__le32 *)tlv_data); | |
| break; | |
| case IWL_UCODE_TLV_RUNT_ERRLOG_PTR: | |
| if (tlv_len != sizeof(u32)) | |
| goto invalid_tlv_len; | |
| pieces->inst_errlog_ptr = | |
| le32_to_cpup((__le32 *)tlv_data); | |
| break; | |
| case IWL_UCODE_TLV_ENHANCE_SENS_TBL: | |
| if (tlv_len) | |
| goto invalid_tlv_len; | |
| drv->fw.enhance_sensitivity_table = true; | |
| break; | |
| case IWL_UCODE_TLV_WOWLAN_INST: | |
| set_sec_data(pieces, IWL_UCODE_WOWLAN, | |
| IWL_UCODE_SECTION_INST, tlv_data); | |
| set_sec_size(pieces, IWL_UCODE_WOWLAN, | |
| IWL_UCODE_SECTION_INST, tlv_len); | |
| set_sec_offset(pieces, IWL_UCODE_WOWLAN, | |
| IWL_UCODE_SECTION_INST, | |
| IWLAGN_RTC_INST_LOWER_BOUND); | |
| break; | |
| case IWL_UCODE_TLV_WOWLAN_DATA: | |
| set_sec_data(pieces, IWL_UCODE_WOWLAN, | |
| IWL_UCODE_SECTION_DATA, tlv_data); | |
| set_sec_size(pieces, IWL_UCODE_WOWLAN, | |
| IWL_UCODE_SECTION_DATA, tlv_len); | |
| set_sec_offset(pieces, IWL_UCODE_WOWLAN, | |
| IWL_UCODE_SECTION_DATA, | |
| IWLAGN_RTC_DATA_LOWER_BOUND); | |
| break; | |
| case IWL_UCODE_TLV_PHY_CALIBRATION_SIZE: | |
| if (tlv_len != sizeof(u32)) | |
| goto invalid_tlv_len; | |
| capa->standard_phy_calibration_size = | |
| le32_to_cpup((__le32 *)tlv_data); | |
| break; | |
| case IWL_UCODE_TLV_SEC_RT: | |
| iwl_store_ucode_sec(pieces, tlv_data, IWL_UCODE_REGULAR, | |
| tlv_len); | |
| drv->fw.type = IWL_FW_MVM; | |
| break; | |
| case IWL_UCODE_TLV_SEC_INIT: | |
| iwl_store_ucode_sec(pieces, tlv_data, IWL_UCODE_INIT, | |
| tlv_len); | |
| drv->fw.type = IWL_FW_MVM; | |
| break; | |
| case IWL_UCODE_TLV_SEC_WOWLAN: | |
| iwl_store_ucode_sec(pieces, tlv_data, IWL_UCODE_WOWLAN, | |
| tlv_len); | |
| drv->fw.type = IWL_FW_MVM; | |
| break; | |
| case IWL_UCODE_TLV_DEF_CALIB: | |
| if (tlv_len != sizeof(struct iwl_tlv_calib_data)) | |
| goto invalid_tlv_len; | |
| if (iwl_set_default_calib(drv, tlv_data)) | |
| goto tlv_error; | |
| break; | |
| case IWL_UCODE_TLV_PHY_SKU: | |
| if (tlv_len != sizeof(u32)) | |
| goto invalid_tlv_len; | |
| drv->fw.phy_config = le32_to_cpup((__le32 *)tlv_data); | |
| drv->fw.valid_tx_ant = (drv->fw.phy_config & | |
| FW_PHY_CFG_TX_CHAIN) >> | |
| FW_PHY_CFG_TX_CHAIN_POS; | |
| drv->fw.valid_rx_ant = (drv->fw.phy_config & | |
| FW_PHY_CFG_RX_CHAIN) >> | |
| FW_PHY_CFG_RX_CHAIN_POS; | |
| break; | |
| case IWL_UCODE_TLV_SECURE_SEC_RT: | |
| iwl_store_ucode_sec(pieces, tlv_data, IWL_UCODE_REGULAR, | |
| tlv_len); | |
| drv->fw.type = IWL_FW_MVM; | |
| break; | |
| case IWL_UCODE_TLV_SECURE_SEC_INIT: | |
| iwl_store_ucode_sec(pieces, tlv_data, IWL_UCODE_INIT, | |
| tlv_len); | |
| drv->fw.type = IWL_FW_MVM; | |
| break; | |
| case IWL_UCODE_TLV_SECURE_SEC_WOWLAN: | |
| iwl_store_ucode_sec(pieces, tlv_data, IWL_UCODE_WOWLAN, | |
| tlv_len); | |
| drv->fw.type = IWL_FW_MVM; | |
| break; | |
| case IWL_UCODE_TLV_NUM_OF_CPU: | |
| if (tlv_len != sizeof(u32)) | |
| goto invalid_tlv_len; | |
| num_of_cpus = | |
| le32_to_cpup((__le32 *)tlv_data); | |
| if (num_of_cpus == 2) { | |
| drv->fw.img[IWL_UCODE_REGULAR].is_dual_cpus = | |
| true; | |
| drv->fw.img[IWL_UCODE_INIT].is_dual_cpus = | |
| true; | |
| drv->fw.img[IWL_UCODE_WOWLAN].is_dual_cpus = | |
| true; | |
| } else if ((num_of_cpus > 2) || (num_of_cpus < 1)) { | |
| IWL_ERR(drv, "Driver support upto 2 CPUs\n"); | |
| return -EINVAL; | |
| } | |
| break; | |
| case IWL_UCODE_TLV_CSCHEME: | |
| if (iwl_store_cscheme(&drv->fw, tlv_data, tlv_len)) | |
| goto invalid_tlv_len; | |
| break; | |
| case IWL_UCODE_TLV_N_SCAN_CHANNELS: | |
| if (tlv_len != sizeof(u32)) | |
| goto invalid_tlv_len; | |
| capa->n_scan_channels = | |
| le32_to_cpup((__le32 *)tlv_data); | |
| break; | |
| case IWL_UCODE_TLV_FW_VERSION: { | |
| __le32 *ptr = (void *)tlv_data; | |
| u32 major, minor; | |
| u8 local_comp; | |
| if (tlv_len != sizeof(u32) * 3) | |
| goto invalid_tlv_len; | |
| major = le32_to_cpup(ptr++); | |
| minor = le32_to_cpup(ptr++); | |
| local_comp = le32_to_cpup(ptr); | |
| snprintf(drv->fw.fw_version, | |
| sizeof(drv->fw.fw_version), "%u.%u.%u", | |
| major, minor, local_comp); | |
| break; | |
| } | |
| case IWL_UCODE_TLV_FW_DBG_DEST: { | |
| struct iwl_fw_dbg_dest_tlv *dest = (void *)tlv_data; | |
| if (pieces->dbg_dest_tlv) { | |
| IWL_ERR(drv, | |
| "dbg destination ignored, already exists\n"); | |
| break; | |
| } | |
| pieces->dbg_dest_tlv = dest; | |
| IWL_INFO(drv, "Found debug destination: %s\n", | |
| get_fw_dbg_mode_string(dest->monitor_mode)); | |
| drv->fw.dbg_dest_reg_num = | |
| tlv_len - offsetof(struct iwl_fw_dbg_dest_tlv, | |
| reg_ops); | |
| drv->fw.dbg_dest_reg_num /= | |
| sizeof(drv->fw.dbg_dest_tlv->reg_ops[0]); | |
| break; | |
| } | |
| case IWL_UCODE_TLV_FW_DBG_CONF: { | |
| struct iwl_fw_dbg_conf_tlv *conf = (void *)tlv_data; | |
| if (!pieces->dbg_dest_tlv) { | |
| IWL_ERR(drv, | |
| "Ignore dbg config %d - no destination configured\n", | |
| conf->id); | |
| break; | |
| } | |
| if (conf->id >= ARRAY_SIZE(drv->fw.dbg_conf_tlv)) { | |
| IWL_ERR(drv, | |
| "Skip unknown configuration: %d\n", | |
| conf->id); | |
| break; | |
| } | |
| if (pieces->dbg_conf_tlv[conf->id]) { | |
| IWL_ERR(drv, | |
| "Ignore duplicate dbg config %d\n", | |
| conf->id); | |
| break; | |
| } | |
| if (conf->usniffer) | |
| usniffer_req = true; | |
| IWL_INFO(drv, "Found debug configuration: %d\n", | |
| conf->id); | |
| pieces->dbg_conf_tlv[conf->id] = conf; | |
| pieces->dbg_conf_tlv_len[conf->id] = tlv_len; | |
| break; | |
| } | |
| case IWL_UCODE_TLV_FW_DBG_TRIGGER: { | |
| struct iwl_fw_dbg_trigger_tlv *trigger = | |
| (void *)tlv_data; | |
| u32 trigger_id = le32_to_cpu(trigger->id); | |
| if (trigger_id >= ARRAY_SIZE(drv->fw.dbg_trigger_tlv)) { | |
| IWL_ERR(drv, | |
| "Skip unknown trigger: %u\n", | |
| trigger->id); | |
| break; | |
| } | |
| if (pieces->dbg_trigger_tlv[trigger_id]) { | |
| IWL_ERR(drv, | |
| "Ignore duplicate dbg trigger %u\n", | |
| trigger->id); | |
| break; | |
| } | |
| IWL_INFO(drv, "Found debug trigger: %u\n", trigger->id); | |
| pieces->dbg_trigger_tlv[trigger_id] = trigger; | |
| pieces->dbg_trigger_tlv_len[trigger_id] = tlv_len; | |
| break; | |
| } | |
| case IWL_UCODE_TLV_SEC_RT_USNIFFER: | |
| *usniffer_images = true; | |
| iwl_store_ucode_sec(pieces, tlv_data, | |
| IWL_UCODE_REGULAR_USNIFFER, | |
| tlv_len); | |
| break; | |
| case IWL_UCODE_TLV_PAGING: | |
| if (tlv_len != sizeof(u32)) | |
| goto invalid_tlv_len; | |
| paging_mem_size = le32_to_cpup((__le32 *)tlv_data); | |
| IWL_DEBUG_FW(drv, | |
| "Paging: paging enabled (size = %u bytes)\n", | |
| paging_mem_size); | |
| if (paging_mem_size > MAX_PAGING_IMAGE_SIZE) { | |
| IWL_ERR(drv, | |
| "Paging: driver supports up to %lu bytes for paging image\n", | |
| MAX_PAGING_IMAGE_SIZE); | |
| return -EINVAL; | |
| } | |
| if (paging_mem_size & (FW_PAGING_SIZE - 1)) { | |
| IWL_ERR(drv, | |
| "Paging: image isn't multiple %lu\n", | |
| FW_PAGING_SIZE); | |
| return -EINVAL; | |
| } | |
| drv->fw.img[IWL_UCODE_REGULAR].paging_mem_size = | |
| paging_mem_size; | |
| usniffer_img = IWL_UCODE_REGULAR_USNIFFER; | |
| drv->fw.img[usniffer_img].paging_mem_size = | |
| paging_mem_size; | |
| break; | |
| case IWL_UCODE_TLV_SDIO_ADMA_ADDR: | |
| if (tlv_len != sizeof(u32)) | |
| goto invalid_tlv_len; | |
| drv->fw.sdio_adma_addr = | |
| le32_to_cpup((__le32 *)tlv_data); | |
| break; | |
| case IWL_UCODE_TLV_FW_GSCAN_CAPA: | |
| /* | |
| * Don't return an error in case of a shorter tlv_len | |
| * to enable loading of FW that has an old format | |
| * of GSCAN capabilities TLV. | |
| */ | |
| if (tlv_len < sizeof(struct iwl_fw_gscan_capabilities)) | |
| break; | |
| iwl_store_gscan_capa(&drv->fw, tlv_data, tlv_len); | |
| gscan_capa = true; | |
| break; | |
| case IWL_UCODE_TLV_FW_MEM_SEG: { | |
| struct iwl_fw_dbg_mem_seg_tlv *dbg_mem = | |
| (void *)tlv_data; | |
| u32 type; | |
| if (tlv_len != (sizeof(*dbg_mem))) | |
| goto invalid_tlv_len; | |
| type = le32_to_cpu(dbg_mem->data_type); | |
| drv->fw.dbg_dynamic_mem = true; | |
| if (type >= ARRAY_SIZE(drv->fw.dbg_mem_tlv)) { | |
| IWL_ERR(drv, | |
| "Skip unknown dbg mem segment: %u\n", | |
| dbg_mem->data_type); | |
| break; | |
| } | |
| if (pieces->dbg_mem_tlv[type]) { | |
| IWL_ERR(drv, | |
| "Ignore duplicate mem segment: %u\n", | |
| dbg_mem->data_type); | |
| break; | |
| } | |
| IWL_DEBUG_INFO(drv, "Found debug memory segment: %u\n", | |
| dbg_mem->data_type); | |
| pieces->dbg_mem_tlv[type] = dbg_mem; | |
| break; | |
| } | |
| default: | |
| IWL_DEBUG_INFO(drv, "unknown TLV: %d\n", tlv_type); | |
| break; | |
| } | |
| } | |
| if (!fw_has_capa(capa, IWL_UCODE_TLV_CAPA_USNIFFER_UNIFIED) && | |
| usniffer_req && !*usniffer_images) { | |
| IWL_ERR(drv, | |
| "user selected to work with usniffer but usniffer image isn't available in ucode package\n"); | |
| return -EINVAL; | |
| } | |
| if (len) { | |
| IWL_ERR(drv, "invalid TLV after parsing: %zd\n", len); | |
| iwl_print_hex_dump(drv, IWL_DL_FW, (u8 *)data, len); | |
| return -EINVAL; | |
| } | |
| /* | |
| * If ucode advertises that it supports GSCAN but GSCAN | |
| * capabilities TLV is not present, or if it has an old format, | |
| * warn and continue without GSCAN. | |
| */ | |
| if (fw_has_capa(capa, IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT) && | |
| !gscan_capa) { | |
| IWL_DEBUG_INFO(drv, | |
| "GSCAN is supported but capabilities TLV is unavailable\n"); | |
| __clear_bit((__force long)IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT, | |
| capa->_capa); | |
| } | |
| return 0; | |
| invalid_tlv_len: | |
| IWL_ERR(drv, "TLV %d has invalid size: %u\n", tlv_type, tlv_len); | |
| tlv_error: | |
| iwl_print_hex_dump(drv, IWL_DL_FW, tlv_data, tlv_len); | |
| return -EINVAL; | |
| } | |
| static int iwl_alloc_ucode(struct iwl_drv *drv, | |
| struct iwl_firmware_pieces *pieces, | |
| enum iwl_ucode_type type) | |
| { | |
| int i; | |
| for (i = 0; | |
| i < IWL_UCODE_SECTION_MAX && get_sec_size(pieces, type, i); | |
| i++) | |
| if (iwl_alloc_fw_desc(drv, &(drv->fw.img[type].sec[i]), | |
| get_sec(pieces, type, i))) | |
| return -ENOMEM; | |
| return 0; | |
| } | |
| static int validate_sec_sizes(struct iwl_drv *drv, | |
| struct iwl_firmware_pieces *pieces, | |
| const struct iwl_cfg *cfg) | |
| { | |
| IWL_DEBUG_INFO(drv, "f/w package hdr runtime inst size = %Zd\n", | |
| get_sec_size(pieces, IWL_UCODE_REGULAR, | |
| IWL_UCODE_SECTION_INST)); | |
| IWL_DEBUG_INFO(drv, "f/w package hdr runtime data size = %Zd\n", | |
| get_sec_size(pieces, IWL_UCODE_REGULAR, | |
| IWL_UCODE_SECTION_DATA)); | |
| IWL_DEBUG_INFO(drv, "f/w package hdr init inst size = %Zd\n", | |
| get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST)); | |
| IWL_DEBUG_INFO(drv, "f/w package hdr init data size = %Zd\n", | |
| get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA)); | |
| /* Verify that uCode images will fit in card's SRAM. */ | |
| if (get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_INST) > | |
| cfg->max_inst_size) { | |
| IWL_ERR(drv, "uCode instr len %Zd too large to fit in\n", | |
| get_sec_size(pieces, IWL_UCODE_REGULAR, | |
| IWL_UCODE_SECTION_INST)); | |
| return -1; | |
| } | |
| if (get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA) > | |
| cfg->max_data_size) { | |
| IWL_ERR(drv, "uCode data len %Zd too large to fit in\n", | |
| get_sec_size(pieces, IWL_UCODE_REGULAR, | |
| IWL_UCODE_SECTION_DATA)); | |
| return -1; | |
| } | |
| if (get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST) > | |
| cfg->max_inst_size) { | |
| IWL_ERR(drv, "uCode init instr len %Zd too large to fit in\n", | |
| get_sec_size(pieces, IWL_UCODE_INIT, | |
| IWL_UCODE_SECTION_INST)); | |
| return -1; | |
| } | |
| if (get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA) > | |
| cfg->max_data_size) { | |
| IWL_ERR(drv, "uCode init data len %Zd too large to fit in\n", | |
| get_sec_size(pieces, IWL_UCODE_REGULAR, | |
| IWL_UCODE_SECTION_DATA)); | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| static struct iwl_op_mode * | |
| _iwl_op_mode_start(struct iwl_drv *drv, struct iwlwifi_opmode_table *op) | |
| { | |
| const struct iwl_op_mode_ops *ops = op->ops; | |
| struct dentry *dbgfs_dir = NULL; | |
| struct iwl_op_mode *op_mode = NULL; | |
| #ifdef CONFIG_IWLWIFI_DEBUGFS | |
| drv->dbgfs_op_mode = debugfs_create_dir(op->name, | |
| drv->dbgfs_drv); | |
| if (!drv->dbgfs_op_mode) { | |
| IWL_ERR(drv, | |
| "failed to create opmode debugfs directory\n"); | |
| return op_mode; | |
| } | |
| dbgfs_dir = drv->dbgfs_op_mode; | |
| #endif | |
| op_mode = ops->start(drv->trans, drv->cfg, &drv->fw, dbgfs_dir); | |
| #ifdef CONFIG_IWLWIFI_DEBUGFS | |
| if (!op_mode) { | |
| debugfs_remove_recursive(drv->dbgfs_op_mode); | |
| drv->dbgfs_op_mode = NULL; | |
| } | |
| #endif | |
| return op_mode; | |
| } | |
| static void _iwl_op_mode_stop(struct iwl_drv *drv) | |
| { | |
| /* op_mode can be NULL if its start failed */ | |
| if (drv->op_mode) { | |
| iwl_op_mode_stop(drv->op_mode); | |
| drv->op_mode = NULL; | |
| #ifdef CONFIG_IWLWIFI_DEBUGFS | |
| debugfs_remove_recursive(drv->dbgfs_op_mode); | |
| drv->dbgfs_op_mode = NULL; | |
| #endif | |
| } | |
| } | |
| /** | |
| * iwl_req_fw_callback - callback when firmware was loaded | |
| * | |
| * If loaded successfully, copies the firmware into buffers | |
| * for the card to fetch (via DMA). | |
| */ | |
| static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context) | |
| { | |
| struct iwl_drv *drv = context; | |
| struct iwl_fw *fw = &drv->fw; | |
| struct iwl_ucode_header *ucode; | |
| struct iwlwifi_opmode_table *op; | |
| int err; | |
| struct iwl_firmware_pieces *pieces; | |
| const unsigned int api_max = drv->cfg->ucode_api_max; | |
| const unsigned int api_min = drv->cfg->ucode_api_min; | |
| size_t trigger_tlv_sz[FW_DBG_TRIGGER_MAX]; | |
| u32 api_ver; | |
| int i; | |
| bool load_module = false; | |
| bool usniffer_images = false; | |
| fw->ucode_capa.max_probe_length = IWL_DEFAULT_MAX_PROBE_LENGTH; | |
| fw->ucode_capa.standard_phy_calibration_size = | |
| IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE; | |
| fw->ucode_capa.n_scan_channels = IWL_DEFAULT_SCAN_CHANNELS; | |
| pieces = kzalloc(sizeof(*pieces), GFP_KERNEL); | |
| if (!pieces) | |
| return; | |
| if (!ucode_raw) | |
| goto try_again; | |
| IWL_DEBUG_INFO(drv, "Loaded firmware file '%s' (%zd bytes).\n", | |
| drv->firmware_name, ucode_raw->size); | |
| /* Make sure that we got at least the API version number */ | |
| if (ucode_raw->size < 4) { | |
| IWL_ERR(drv, "File size way too small!\n"); | |
| goto try_again; | |
| } | |
| /* Data from ucode file: header followed by uCode images */ | |
| ucode = (struct iwl_ucode_header *)ucode_raw->data; | |
| if (ucode->ver) | |
| err = iwl_parse_v1_v2_firmware(drv, ucode_raw, pieces); | |
| else | |
| err = iwl_parse_tlv_firmware(drv, ucode_raw, pieces, | |
| &fw->ucode_capa, &usniffer_images); | |
| if (err) | |
| goto try_again; | |
| if (fw_has_api(&drv->fw.ucode_capa, IWL_UCODE_TLV_API_NEW_VERSION)) | |
| api_ver = drv->fw.ucode_ver; | |
| else | |
| api_ver = IWL_UCODE_API(drv->fw.ucode_ver); | |
| /* | |
| * api_ver should match the api version forming part of the | |
| * firmware filename ... but we don't check for that and only rely | |
| * on the API version read from firmware header from here on forward | |
| */ | |
| if (api_ver < api_min || api_ver > api_max) { | |
| IWL_ERR(drv, | |
| "Driver unable to support your firmware API. " | |
| "Driver supports v%u, firmware is v%u.\n", | |
| api_max, api_ver); | |
| goto try_again; | |
| } | |
| /* | |
| * In mvm uCode there is no difference between data and instructions | |
| * sections. | |
| */ | |
| if (fw->type == IWL_FW_DVM && validate_sec_sizes(drv, pieces, drv->cfg)) | |
| goto try_again; | |
| /* Allocate ucode buffers for card's bus-master loading ... */ | |
| /* Runtime instructions and 2 copies of data: | |
| * 1) unmodified from disk | |
| * 2) backup cache for save/restore during power-downs */ | |
| for (i = 0; i < IWL_UCODE_TYPE_MAX; i++) | |
| if (iwl_alloc_ucode(drv, pieces, i)) | |
| goto out_free_fw; | |
| if (pieces->dbg_dest_tlv) { | |
| drv->fw.dbg_dest_tlv = | |
| kmemdup(pieces->dbg_dest_tlv, | |
| sizeof(*pieces->dbg_dest_tlv) + | |
| sizeof(pieces->dbg_dest_tlv->reg_ops[0]) * | |
| drv->fw.dbg_dest_reg_num, GFP_KERNEL); | |
| if (!drv->fw.dbg_dest_tlv) | |
| goto out_free_fw; | |
| } | |
| for (i = 0; i < ARRAY_SIZE(drv->fw.dbg_conf_tlv); i++) { | |
| if (pieces->dbg_conf_tlv[i]) { | |
| drv->fw.dbg_conf_tlv_len[i] = | |
| pieces->dbg_conf_tlv_len[i]; | |
| drv->fw.dbg_conf_tlv[i] = | |
| kmemdup(pieces->dbg_conf_tlv[i], | |
| drv->fw.dbg_conf_tlv_len[i], | |
| GFP_KERNEL); | |
| if (!drv->fw.dbg_conf_tlv[i]) | |
| goto out_free_fw; | |
| } | |
| } | |
| memset(&trigger_tlv_sz, 0xff, sizeof(trigger_tlv_sz)); | |
| trigger_tlv_sz[FW_DBG_TRIGGER_MISSED_BEACONS] = | |
| sizeof(struct iwl_fw_dbg_trigger_missed_bcon); | |
| trigger_tlv_sz[FW_DBG_TRIGGER_CHANNEL_SWITCH] = 0; | |
| trigger_tlv_sz[FW_DBG_TRIGGER_FW_NOTIF] = | |
| sizeof(struct iwl_fw_dbg_trigger_cmd); | |
| trigger_tlv_sz[FW_DBG_TRIGGER_MLME] = | |
| sizeof(struct iwl_fw_dbg_trigger_mlme); | |
| trigger_tlv_sz[FW_DBG_TRIGGER_STATS] = | |
| sizeof(struct iwl_fw_dbg_trigger_stats); | |
| trigger_tlv_sz[FW_DBG_TRIGGER_RSSI] = | |
| sizeof(struct iwl_fw_dbg_trigger_low_rssi); | |
| trigger_tlv_sz[FW_DBG_TRIGGER_TXQ_TIMERS] = | |
| sizeof(struct iwl_fw_dbg_trigger_txq_timer); | |
| trigger_tlv_sz[FW_DBG_TRIGGER_TIME_EVENT] = | |
| sizeof(struct iwl_fw_dbg_trigger_time_event); | |
| trigger_tlv_sz[FW_DBG_TRIGGER_BA] = | |
| sizeof(struct iwl_fw_dbg_trigger_ba); | |
| trigger_tlv_sz[FW_DBG_TRIGGER_TDLS] = | |
| sizeof(struct iwl_fw_dbg_trigger_tdls); | |
| for (i = 0; i < ARRAY_SIZE(drv->fw.dbg_trigger_tlv); i++) { | |
| if (pieces->dbg_trigger_tlv[i]) { | |
| /* | |
| * If the trigger isn't long enough, WARN and exit. | |
| * Someone is trying to debug something and he won't | |
| * be able to catch the bug he is trying to chase. | |
| * We'd better be noisy to be sure he knows what's | |
| * going on. | |
| */ | |
| if (WARN_ON(pieces->dbg_trigger_tlv_len[i] < | |
| (trigger_tlv_sz[i] + | |
| sizeof(struct iwl_fw_dbg_trigger_tlv)))) | |
| goto out_free_fw; | |
| drv->fw.dbg_trigger_tlv_len[i] = | |
| pieces->dbg_trigger_tlv_len[i]; | |
| drv->fw.dbg_trigger_tlv[i] = | |
| kmemdup(pieces->dbg_trigger_tlv[i], | |
| drv->fw.dbg_trigger_tlv_len[i], | |
| GFP_KERNEL); | |
| if (!drv->fw.dbg_trigger_tlv[i]) | |
| goto out_free_fw; | |
| } | |
| } | |
| for (i = 0; i < ARRAY_SIZE(drv->fw.dbg_mem_tlv); i++) { | |
| if (pieces->dbg_mem_tlv[i]) { | |
| drv->fw.dbg_mem_tlv[i] = | |
| kmemdup(pieces->dbg_mem_tlv[i], | |
| sizeof(*drv->fw.dbg_mem_tlv[i]), | |
| GFP_KERNEL); | |
| if (!drv->fw.dbg_mem_tlv[i]) | |
| goto out_free_fw; | |
| } | |
| } | |
| /* Now that we can no longer fail, copy information */ | |
| /* | |
| * The (size - 16) / 12 formula is based on the information recorded | |
| * for each event, which is of mode 1 (including timestamp) for all | |
| * new microcodes that include this information. | |
| */ | |
| fw->init_evtlog_ptr = pieces->init_evtlog_ptr; | |
| if (pieces->init_evtlog_size) | |
| fw->init_evtlog_size = (pieces->init_evtlog_size - 16)/12; | |
| else | |
| fw->init_evtlog_size = | |
| drv->cfg->base_params->max_event_log_size; | |
| fw->init_errlog_ptr = pieces->init_errlog_ptr; | |
| fw->inst_evtlog_ptr = pieces->inst_evtlog_ptr; | |
| if (pieces->inst_evtlog_size) | |
| fw->inst_evtlog_size = (pieces->inst_evtlog_size - 16)/12; | |
| else | |
| fw->inst_evtlog_size = | |
| drv->cfg->base_params->max_event_log_size; | |
| fw->inst_errlog_ptr = pieces->inst_errlog_ptr; | |
| /* | |
| * figure out the offset of chain noise reset and gain commands | |
| * base on the size of standard phy calibration commands table size | |
| */ | |
| if (fw->ucode_capa.standard_phy_calibration_size > | |
| IWL_MAX_PHY_CALIBRATE_TBL_SIZE) | |
| fw->ucode_capa.standard_phy_calibration_size = | |
| IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE; | |
| /* We have our copies now, allow OS release its copies */ | |
| release_firmware(ucode_raw); | |
| mutex_lock(&iwlwifi_opmode_table_mtx); | |
| switch (fw->type) { | |
| case IWL_FW_DVM: | |
| op = &iwlwifi_opmode_table[DVM_OP_MODE]; | |
| break; | |
| default: | |
| WARN(1, "Invalid fw type %d\n", fw->type); | |
| case IWL_FW_MVM: | |
| op = &iwlwifi_opmode_table[MVM_OP_MODE]; | |
| break; | |
| } | |
| IWL_INFO(drv, "loaded firmware version %s op_mode %s\n", | |
| drv->fw.fw_version, op->name); | |
| /* add this device to the list of devices using this op_mode */ | |
| list_add_tail(&drv->list, &op->drv); | |
| if (op->ops) { | |
| drv->op_mode = _iwl_op_mode_start(drv, op); | |
| if (!drv->op_mode) { | |
| mutex_unlock(&iwlwifi_opmode_table_mtx); | |
| goto out_unbind; | |
| } | |
| } else { | |
| load_module = true; | |
| } | |
| mutex_unlock(&iwlwifi_opmode_table_mtx); | |
| /* | |
| * Complete the firmware request last so that | |
| * a driver unbind (stop) doesn't run while we | |
| * are doing the start() above. | |
| */ | |
| complete(&drv->request_firmware_complete); | |
| /* | |
| * Load the module last so we don't block anything | |
| * else from proceeding if the module fails to load | |
| * or hangs loading. | |
| */ | |
| if (load_module) { | |
| err = request_module("%s", op->name); | |
| #ifdef CONFIG_IWLWIFI_OPMODE_MODULAR | |
| if (err) | |
| IWL_ERR(drv, | |
| "failed to load module %s (error %d), is dynamic loading enabled?\n", | |
| op->name, err); | |
| #endif | |
| } | |
| kfree(pieces); | |
| return; | |
| try_again: | |
| /* try next, if any */ | |
| release_firmware(ucode_raw); | |
| if (iwl_request_firmware(drv, false)) | |
| goto out_unbind; | |
| kfree(pieces); | |
| return; | |
| out_free_fw: | |
| IWL_ERR(drv, "failed to allocate pci memory\n"); | |
| iwl_dealloc_ucode(drv); | |
| release_firmware(ucode_raw); | |
| out_unbind: | |
| kfree(pieces); | |
| complete(&drv->request_firmware_complete); | |
| device_release_driver(drv->trans->dev); | |
| } | |
| struct iwl_drv *iwl_drv_start(struct iwl_trans *trans, | |
| const struct iwl_cfg *cfg) | |
| { | |
| struct iwl_drv *drv; | |
| int ret; | |
| drv = kzalloc(sizeof(*drv), GFP_KERNEL); | |
| if (!drv) { | |
| ret = -ENOMEM; | |
| goto err; | |
| } | |
| drv->trans = trans; | |
| drv->dev = trans->dev; | |
| drv->cfg = cfg; | |
| init_completion(&drv->request_firmware_complete); | |
| INIT_LIST_HEAD(&drv->list); | |
| #ifdef CONFIG_IWLWIFI_DEBUGFS | |
| /* Create the device debugfs entries. */ | |
| drv->dbgfs_drv = debugfs_create_dir(dev_name(trans->dev), | |
| iwl_dbgfs_root); | |
| if (!drv->dbgfs_drv) { | |
| IWL_ERR(drv, "failed to create debugfs directory\n"); | |
| ret = -ENOMEM; | |
| goto err_free_drv; | |
| } | |
| /* Create transport layer debugfs dir */ | |
| drv->trans->dbgfs_dir = debugfs_create_dir("trans", drv->dbgfs_drv); | |
| if (!drv->trans->dbgfs_dir) { | |
| IWL_ERR(drv, "failed to create transport debugfs directory\n"); | |
| ret = -ENOMEM; | |
| goto err_free_dbgfs; | |
| } | |
| #endif | |
| ret = iwl_request_firmware(drv, true); | |
| if (ret) { | |
| IWL_ERR(trans, "Couldn't request the fw\n"); | |
| goto err_fw; | |
| } | |
| return drv; | |
| err_fw: | |
| #ifdef CONFIG_IWLWIFI_DEBUGFS | |
| err_free_dbgfs: | |
| debugfs_remove_recursive(drv->dbgfs_drv); | |
| err_free_drv: | |
| #endif | |
| kfree(drv); | |
| err: | |
| return ERR_PTR(ret); | |
| } | |
| void iwl_drv_stop(struct iwl_drv *drv) | |
| { | |
| wait_for_completion(&drv->request_firmware_complete); | |
| _iwl_op_mode_stop(drv); | |
| iwl_dealloc_ucode(drv); | |
| mutex_lock(&iwlwifi_opmode_table_mtx); | |
| /* | |
| * List is empty (this item wasn't added) | |
| * when firmware loading failed -- in that | |
| * case we can't remove it from any list. | |
| */ | |
| if (!list_empty(&drv->list)) | |
| list_del(&drv->list); | |
| mutex_unlock(&iwlwifi_opmode_table_mtx); | |
| #ifdef CONFIG_IWLWIFI_DEBUGFS | |
| debugfs_remove_recursive(drv->dbgfs_drv); | |
| #endif | |
| kfree(drv); | |
| } | |
| /* shared module parameters */ | |
| struct iwl_mod_params iwlwifi_mod_params = { | |
| .restart_fw = true, | |
| .bt_coex_active = true, | |
| .power_level = IWL_POWER_INDEX_1, | |
| .d0i3_disable = true, | |
| .d0i3_entry_delay = 1000, | |
| .uapsd_disable = IWL_DISABLE_UAPSD_BSS | IWL_DISABLE_UAPSD_P2P_CLIENT, | |
| /* the rest are 0 by default */ | |
| }; | |
| IWL_EXPORT_SYMBOL(iwlwifi_mod_params); | |
| int iwl_opmode_register(const char *name, const struct iwl_op_mode_ops *ops) | |
| { | |
| int i; | |
| struct iwl_drv *drv; | |
| struct iwlwifi_opmode_table *op; | |
| mutex_lock(&iwlwifi_opmode_table_mtx); | |
| for (i = 0; i < ARRAY_SIZE(iwlwifi_opmode_table); i++) { | |
| op = &iwlwifi_opmode_table[i]; | |
| if (strcmp(op->name, name)) | |
| continue; | |
| op->ops = ops; | |
| /* TODO: need to handle exceptional case */ | |
| list_for_each_entry(drv, &op->drv, list) | |
| drv->op_mode = _iwl_op_mode_start(drv, op); | |
| mutex_unlock(&iwlwifi_opmode_table_mtx); | |
| return 0; | |
| } | |
| mutex_unlock(&iwlwifi_opmode_table_mtx); | |
| return -EIO; | |
| } | |
| IWL_EXPORT_SYMBOL(iwl_opmode_register); | |
| void iwl_opmode_deregister(const char *name) | |
| { | |
| int i; | |
| struct iwl_drv *drv; | |
| mutex_lock(&iwlwifi_opmode_table_mtx); | |
| for (i = 0; i < ARRAY_SIZE(iwlwifi_opmode_table); i++) { | |
| if (strcmp(iwlwifi_opmode_table[i].name, name)) | |
| continue; | |
| iwlwifi_opmode_table[i].ops = NULL; | |
| /* call the stop routine for all devices */ | |
| list_for_each_entry(drv, &iwlwifi_opmode_table[i].drv, list) | |
| _iwl_op_mode_stop(drv); | |
| mutex_unlock(&iwlwifi_opmode_table_mtx); | |
| return; | |
| } | |
| mutex_unlock(&iwlwifi_opmode_table_mtx); | |
| } | |
| IWL_EXPORT_SYMBOL(iwl_opmode_deregister); | |
| static int __init iwl_drv_init(void) | |
| { | |
| int i; | |
| mutex_init(&iwlwifi_opmode_table_mtx); | |
| for (i = 0; i < ARRAY_SIZE(iwlwifi_opmode_table); i++) | |
| INIT_LIST_HEAD(&iwlwifi_opmode_table[i].drv); | |
| pr_info(DRV_DESCRIPTION "\n"); | |
| pr_info(DRV_COPYRIGHT "\n"); | |
| #ifdef CONFIG_IWLWIFI_DEBUGFS | |
| /* Create the root of iwlwifi debugfs subsystem. */ | |
| iwl_dbgfs_root = debugfs_create_dir(DRV_NAME, NULL); | |
| if (!iwl_dbgfs_root) | |
| return -EFAULT; | |
| #endif | |
| return iwl_pci_register_driver(); | |
| } | |
| module_init(iwl_drv_init); | |
| static void __exit iwl_drv_exit(void) | |
| { | |
| iwl_pci_unregister_driver(); | |
| #ifdef CONFIG_IWLWIFI_DEBUGFS | |
| debugfs_remove_recursive(iwl_dbgfs_root); | |
| #endif | |
| } | |
| module_exit(iwl_drv_exit); | |
| #ifdef CONFIG_IWLWIFI_DEBUG | |
| module_param_named(debug, iwlwifi_mod_params.debug_level, uint, | |
| S_IRUGO | S_IWUSR); | |
| MODULE_PARM_DESC(debug, "debug output mask"); | |
| #endif | |
| module_param_named(swcrypto, iwlwifi_mod_params.sw_crypto, int, S_IRUGO); | |
| MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])"); | |
| module_param_named(11n_disable, iwlwifi_mod_params.disable_11n, uint, S_IRUGO); | |
| MODULE_PARM_DESC(11n_disable, | |
| "disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX"); | |
| module_param_named(amsdu_size, iwlwifi_mod_params.amsdu_size, | |
| int, S_IRUGO); | |
| MODULE_PARM_DESC(amsdu_size, | |
| "amsdu size 0: 12K for multi Rx queue devices, 4K for other devices 1:4K 2:8K 3:12K (default 0)"); | |
| module_param_named(fw_restart, iwlwifi_mod_params.restart_fw, bool, S_IRUGO); | |
| MODULE_PARM_DESC(fw_restart, "restart firmware in case of error (default true)"); | |
| module_param_named(antenna_coupling, iwlwifi_mod_params.ant_coupling, | |
| int, S_IRUGO); | |
| MODULE_PARM_DESC(antenna_coupling, | |
| "specify antenna coupling in dB (default: 0 dB)"); | |
| module_param_named(nvm_file, iwlwifi_mod_params.nvm_file, charp, S_IRUGO); | |
| MODULE_PARM_DESC(nvm_file, "NVM file name"); | |
| module_param_named(d0i3_disable, iwlwifi_mod_params.d0i3_disable, | |
| bool, S_IRUGO); | |
| MODULE_PARM_DESC(d0i3_disable, "disable d0i3 functionality (default: Y)"); | |
| module_param_named(lar_disable, iwlwifi_mod_params.lar_disable, | |
| bool, S_IRUGO); | |
| MODULE_PARM_DESC(lar_disable, "disable LAR functionality (default: N)"); | |
| module_param_named(uapsd_disable, iwlwifi_mod_params.uapsd_disable, | |
| uint, S_IRUGO | S_IWUSR); | |
| MODULE_PARM_DESC(uapsd_disable, | |
| "disable U-APSD functionality bitmap 1: BSS 2: P2P Client (default: 3)"); | |
| /* | |
| * set bt_coex_active to true, uCode will do kill/defer | |
| * every time the priority line is asserted (BT is sending signals on the | |
| * priority line in the PCIx). | |
| * set bt_coex_active to false, uCode will ignore the BT activity and | |
| * perform the normal operation | |
| * | |
| * User might experience transmit issue on some platform due to WiFi/BT | |
| * co-exist problem. The possible behaviors are: | |
| * Able to scan and finding all the available AP | |
| * Not able to associate with any AP | |
| * On those platforms, WiFi communication can be restored by set | |
| * "bt_coex_active" module parameter to "false" | |
| * | |
| * default: bt_coex_active = true (BT_COEX_ENABLE) | |
| */ | |
| module_param_named(bt_coex_active, iwlwifi_mod_params.bt_coex_active, | |
| bool, S_IRUGO); | |
| MODULE_PARM_DESC(bt_coex_active, "enable wifi/bt co-exist (default: enable)"); | |
| module_param_named(led_mode, iwlwifi_mod_params.led_mode, int, S_IRUGO); | |
| MODULE_PARM_DESC(led_mode, "0=system default, " | |
| "1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0)"); | |
| module_param_named(power_save, iwlwifi_mod_params.power_save, | |
| bool, S_IRUGO); | |
| MODULE_PARM_DESC(power_save, | |
| "enable WiFi power management (default: disable)"); | |
| module_param_named(power_level, iwlwifi_mod_params.power_level, | |
| int, S_IRUGO); | |
| MODULE_PARM_DESC(power_level, | |
| "default power save level (range from 1 - 5, default: 1)"); | |
| module_param_named(fw_monitor, iwlwifi_mod_params.fw_monitor, bool, S_IRUGO); | |
| MODULE_PARM_DESC(fw_monitor, | |
| "firmware monitor - to debug FW (default: false - needs lots of memory)"); | |
| module_param_named(d0i3_timeout, iwlwifi_mod_params.d0i3_entry_delay, | |
| uint, S_IRUGO); | |
| MODULE_PARM_DESC(d0i3_timeout, "Timeout to D0i3 entry when idle (ms)"); | |
| module_param_named(disable_11ac, iwlwifi_mod_params.disable_11ac, bool, | |
| S_IRUGO); | |
| MODULE_PARM_DESC(disable_11ac, "Disable VHT capabilities (default: false)"); |